BETA Technologies, Inc. (BETA) Earnings Call Transcript & Summary
March 9, 2026
Earnings Call Speaker Segments
Devon Rothman
executiveThanks, Warren, and hello to everyone on this morning's call. We appreciate your participation in BETA Technologies' earnings call covering the fourth quarter and the complete 2025 fiscal year. Here with me are Kyle Clark, our Founder and Chief Executive Officer, and Herman Cueto, our Chief Financial Officer. Once their prepared comments conclude, we'll take questions in a Q&A session, and Kristen Costello, who leads Government and Regulatory Affairs for us, will be part of that as well. We put out a press release earlier today covering our Q4 and full year 2025 financial results, plus our 2026 outlook; our investor presentation has also been posted and can be found in the Investor Relations area of our website. Ahead of getting started, a reminder that forward-looking statements will be part of today's discussion. Such statements rest on our present expectations and assumptions and carry risks and uncertainties that might lead actual results to differ materially. For a discussion of those risks, please see our SEC filings. Certain non-GAAP financial measures will also be referenced. Reconciliations to the most directly comparable GAAP measures appear in our earnings materials. With that said, Kyle, over to you.
Kyle Clark
executiveAppreciate that, Devon, and hello everybody on this morning's call. We closed out the year with a solid fourth quarter, capping what was truly a pivotal twelve months for BETA. During 2025, we demonstrated up in the skies alongside our customers, our regulators, and in the capital markets. And the way we went about it captured the pragmatism and discipline that have come to characterize this organization. Several milestones were reached across 2025 that pushed certification, commercialization, and defense forward in a substantial way. Across our certification efforts we delivered meaningful movement, marked by 3 achievements worth noting. Together with Hartzell, we secured a Part 35 type certification for the propeller. On the A250 vertical takeoff and landing aircraft, we wrapped up the G1 certification basis. And we kicked off 4 credit testing on the Part 33 motor. On the commercial side, we moved ahead with successful deployments for customers both inside the U.S. and abroad. Our aircraft flew throughout Europe, and we opened the Paris Air Show; at Oshkosh we also flew. A number of world records were set by us, and the Pulitzer Air race was won. In and out of JFK Airport, we operated the first all-electric passenger flight. The Phase 1 contract with General Dynamics was completed, and our defense programs keep expanding. On top of that, we rolled out a strategic partnership and joint technology development program alongside GE. Throughout 2025 and into 2026, strong regulatory tailwinds are evident; back in December, the Department of Transportation put out the AAM National Strategy, which aligns closely with what BETA is doing. Congress keeps putting money behind our future, most recently via introduction of the bipartisan legislation called the Aviation Innovation and Global Competitiveness Act, which will deliver greater transparency around the FAA's policy and guidance development and certification programs — something critically important for AAM technologies. What this lays out is a partnership joining the FAA and industry that boosts predictability of their deliverables, which helps our planning while keeping intact the agency's gold standard for safety and oversight. As we look toward 2026, an announcement is pending on the eVTOL Integration Pilot Program, or eIPP, led by the FAA together with the U.S. Department of Transportation. After an executive order came out in June of 2025, early commercial operations of electric aircraft will likely become permissible under this program. For BETA, that could mean an enormous opportunity, pushing our whole business model ahead by over a year. Excitement around electric aviation has already surfaced through the proposal process nationwide, among commercial operators, local governments, and in rural communities. Selection announcements should come very soon; each company stands to gain something different from this program. What makes it unique for BETA is that it involves not just airplane deployments but the charge network too, which is set to expand considerably across the next 3 years. Applications have been submitted spanning 41 states, covering various use cases such as cargo, medical, and passenger, in both our CTOL and VTOL aircraft. There are a few reasons BETA holds a uniquely strong position to seize this opportunity. To start, the FAA is going to put safety first by way of maturing both systems and aircraft. When it comes to flying electric aircraft with customers, our real-world operational experience exceeds that of everyone else in the industry put together. Our planes have flown all over the country, serving cargo, medical, and passenger missions in crowded airspace and in every kind of weather, and all of it is supported by a full ecosystem covering pilot training, maintenance, safety, and the reliability that commercial operations demand. Second, we are the owners and operators of the sole UL-certified charging network for aircraft. eIPP is a big chance to speed up the growth of that network. On top of that, since we are the only charge network that exists, we are working with other OEMs to pinpoint the priority charging locations needed to back their proposed future eIPP missions too. This pushes forward our plan to keep ownership of the network that governs the flow of energy into electric aviation. Third, communities around the nation have figured out how our aircraft can serve their transportation needs right now; we are honored that our aircraft have been named in more applications than those of any other company in the industry, and we look forward to keeping on delivering for our country, our partners, and our investors. Back in December, the last time we spoke, I set out 5 key performance indicators that we think are the best and most transparent means of tracking our progress. Let's begin with our backlog. For BETA, 2025 was a commercial victory for aircraft, but even more distinctively in selling motors and other technologies to partners such as Embraer Eve and General Dynamics. Across the year, we added more than $1 billion to our commercial aircraft backlog, and separately, another $1 billion to our backlog of enabling technologies. Our aircraft backlog right now stands at 891 aircraft in firm and option orders that are backed by a financial commitment. By year's end, we anticipate our commercial aircraft backlog will exceed $4 billion, and that our enabling technologies backlog will keep rising steadily. Next, we passed 125,000 nautical miles flown, which is a substantial jump from the last time we spoke. Those miles show the safety and reliability of our CTOL and our VTOL aircraft. We think this straightforward metric of airplanes doing what they were built to do, which is fly, will keep setting BETA apart within AAM; for 2026, we aim to reach 0.25 million nautical miles flown. Third, regarding our charge network, we have activated 2 new sites since the last time we spoke and concentrated the permit applications for further sites as we get ready for our eIPP and customer-driven network growth. Our target for 2026 is to get to 150 total charge sites. Fourth, when it comes to production, our focus is on building conforming articles during the first half of this year, then ramping up to 4.5 aircraft per month by the end of the year. These conforming articles directly support certification, which brings us to our next KPI. We achieved meaningful progress across our 3 certification programs, especially on our H500A electric engine. The last time we spoke, we had finished the build and the FAA conformity inspection of 2 electric engines. As we wrapped up 2025, our build and FAA conformity inspection wrapped up on 11 propulsion systems, giving us a full set of test assets along with spares. In line with how we're pursuing certification, we began with the test carrying the most risk and taking the most time, and we've now finished one of the toughest, longest-lasting of them: the durability test, spanning 1,000 hours of operation across assorted environments with inspections at intermediate points. Endurance testing, which puts the engine under prolonged stress in much the same way, is moving along well; we're also still advancing through the other certification test areas that remain. On top of that, software testing is something discussed less often yet essential for securing type certification. Requirements-based software testing stands at 85% done, and we expect to finish those tests by the end of April. Over in our CTOL program, the means of compliance and the requirements definition phase are now largely behind us. Within the DDS collector, 98% of the regs have been covered. Only 2 issue papers remain open, and we've reached agreement on those, with them now in the last stage of having their closed position documented.
Kyle Clark
executiveOn the compliance planning side, we've moved forward too: out of 20 total certification plans, 17 have been turned in, and 9 of those are already accepted. That lets early test activities begin and locks in our path toward TIA and type certification. We've also kicked off planning for certification test activities, with the FAA having accepted 6 structural test plans along with 12 flight test plans. As part of getting ready for type inspection authorization, or TIA, preliminary safety assessments have been reviewed together with the FAA. Work from our CTOL program on means of compliance and certification plans is paying off for our VTOL program, and at a significant level we intend to reuse all of it. The commonality between our CTOL and VTOL aircraft is what makes that transferability possible. We don't count any progress as real until our partners at the FAA have accepted and approved it. Out of our Plattsburg, New York facility, the A250 engineering flight test program keeps running; progress is steady, and we're gathering an immense amount of data about how our lift propulsion systems perform, which supports our certification efforts. Now turning to defense. The January 2026 executive order putting the war fighter first in defense contracting is an urgent directive telling defense primes to find and engage advanced, agile American companies with proven ability; 3 prime defense contractors have approached us, and we are evaluating those opportunities. Phase 1 is complete for our programs with both General Electric and General Dynamics, and with Army DEVCOM we hit our deliverables. Those programs showed BETA's capabilities excellently. We're now working toward the next phases, which bring significantly higher revenue opportunities. On top of that, given growing demand signals for low-cost, flexible unmanned assets, we've accelerated our MV250 program by 6 months. Our partnership with GE, plus how quickly we can scale production, positions us to meet the nation's defense needs. The military is backing this effort and has funded our work on autonomy and hybridization technology through the contract from the U.S. Army Combat Capabilities Development Command, known as DEVCOM. Every one of our aircraft was designed with acute self-awareness and a set of capabilities meant to unlock autonomous operations. The fly-by-wire system, which our beta-developed flight controllers form the foundation of, can natively take control inputs from a computer rather than a human. That's a key differentiator versus other autonomous aircraft, since nothing has to be redesigned or fundamentally altered for flight with no one at the controls. To Eve, we delivered a full shipset plus spares of lift and pusher electric engines, which let them fly their VTOL aircraft successfully; we've been working closely with the amazing team at Eve, and both sides have benefited from this relationship. Conforming aircraft, earning the first FAA type certification for our propulsion systems, more defense work, ramping production, and deploying aircraft and charge systems into commercial operations will define this year. We're not anticipating that any part of this will come easily, yet the folks on our BETA team possess the determination required for tough effort, along with a well-defined plan. Herman, the floor is yours.
Herman Cueto
executiveKyle, thank you, and good morning to all of you. Ahead of getting into what we reported, I'd like to start by zooming out and looking at where the industry stands. The policy and regulatory backdrop we're working within right now is among the most favorable our sector has experienced in many years. Domestic manufacturing, advanced air mobility, and next-generation defense technologies have all received considerable attention from the current administration. That attention is speeding up regulatory engagement, opening the door to public-private collaboration, and underscoring why advanced technologies built in the U.S. matter strategically. In advanced air mobility specifically, we're witnessing substantial federal alignment when it comes to certification, infrastructure build-out, and frameworks for early deployment. eIPP stands out as a concrete illustration of that momentum. For us at BETA, steady execution continues to be the bedrock, and we keep putting capital to work with discipline and focus. Across 2025, the team proved it could seize opportunities alongside some of the most defining names in aerospace and defense, among them GE, General Dynamics, and Embraer Eve. Every one of those relationships holds considerable potential over the long term, and financial results from them are already coming in. Eve illustrates this well. What started out as delivering a handful of motors in support of their flight test campaign grew into an order valued at as much as $1 billion. A portion of the demand for our defense propulsion technologies arrived through our being chosen as a partner for next-generation undersea vehicle applications. Our steady execution and performance have bolstered our credibility and put us in position for further work with attractive margins and lasting long-term revenue. I'm happy to share that full year revenue for 2025 came to $35.6 million, beating expectations and powered by component sales that came in stronger than anticipated. That's over twice the $15.1 million in revenue we recorded for 2024. Operating expenses for 2025 reached $398 million, versus $283 million in 2024. That figure comprised $260 million of research and development along with $138 million of general and administrative expense. Adjusted EBITDA for 2025 came in at negative $304 million, better than expected and underscoring our established record of managing expenses carefully while pushing forward on key certification and commercialization milestones. As a point of comparison, adjusted EBITDA for 2024 was negative $243 million. We closed out the year holding roughly $1.7 billion in cash, which gives us one of the strongest balance sheets anywhere in our industry and backs our certification and commercialization road map. CapEx in 2025 totaled $45.4 million, compared with $73.5 million in 2024. Those investments went mainly toward certification and getting production ready, which speaks to our ongoing progress in manufacturing maturity and vertical integration. Analysts and investors who tour our manufacturing facility consistently notice the same thing: how mature our production lines are. We build both CTOL and VTOL aircraft on 2 common lines inside a facility intended to produce as many as 300 aircraft annually. That speaks to the substantial investment already made and sets us up to scale efficiently once certification milestones are reached. As we look toward 2026, disciplined capital allocation stays our priority. We anticipate revenue in the range of $39 million to $43 million, fueled by the ongoing ramp of long-term strategic partnerships formed in 2025. We anticipate adjusted EBITDA to land somewhere between negative $305 million and negative $395 million, driven by our work to secure certification, scale up production capacity, and back initial commercial deployments. Thanks to the strength of our balance sheet, we're pulling forward parts of our vertical integration plan into 2026. The main reason is that we're moving ahead on investments that were already planned, so we can bring critical manufacturing capabilities in-house sooner and enhance our margin profile over the long term. Because of that acceleration, total CapEx for 2026 should fall in the range of $175 million to $225 million. For modeling purposes, here's some added context: we anticipate first quarter revenue between $7 million and $10 million, which mirrors the early-stage ramp of a number of programs that should pick up speed as the year goes on; we've been securing long lead materials. We anticipate first quarter adjusted EBITDA will be outsized, landing between negative $95 million and negative $110 million; this spending backs the build and progress of our MV250 hybrid VTOL aircraft, our VTOL and conforming CTOL aircraft. Regarding the eIPP, no award selections have been made public yet, and the related agreements still require negotiation. Because we lack award visibility and negotiations hinge on each individual award, no eIPP-related investments have been factored into our 2026 guidance. If we were chosen as an eIPP award recipient, we would revise our guidance to capture the related capital deployment. Our balance sheet puts us in a position to move quickly if those awards come through. However, absent formal notification and contractual clarity, our outlook stays independent of eIPP. With that, operator, we're ready to take questions on the call.
Kristine Liwag
analystKyle, it's Liwag here in San Francisco. I wanted to ask — thanks to the IPO proceeds, you ended up raising over twice the amount of capital you'd originally expected. Could you discuss how that extra capital shifted your plans and your business model?
Kyle Clark
executiveAbsolutely. Essentially, our business model hasn't changed one bit; what it did do is let us push a few things forward. We've put more money into vertical integration, particularly in areas we hadn't previously labeled as core enabling technologies, but which have become obviously necessary for us to be world-class in. Previously, we were fully vertically integrated across motors, propulsion systems, batteries, controls, and software; now we've stretched that outward so we're fully vertically integrated on structures and the other major bone elements of the aircraft. That's one significant vertical integration investment; the second item is really accelerating our MV250 — the proceeds, I think, came partly from those big engagements we've had with General Electric, General Dynamics, and Embraer. Those didn't just generate the proceeds; they also produced really, really clear and valuable partnerships; with GE on the turbo generator, having clarity and confidence in the propulsion systems for the MV250, combined with the structure and heavy reuse of A250 components, let us pull that forward; so the financial commitment to accelerating the MV250 fundamentally moves that portion of our business model ahead compared to what we laid out at the IPO, and that's a direct outcome of the proceeds. Herman, anything you'd like to add on that?
Herman Cueto
executiveYeah. Kristine, there are perhaps a couple of things I'd like to highlight. Back when we got together during September 2025 and walked through the analyst model, our CapEx figure for 2026 stood at roughly $70 million, while for 2027 it was around $130 million. That means the $200 million midpoint figure we've been referencing is essentially just an acceleration of the 2027 amount. Nothing here represents fresh spending; every bit of it was already planned. We're merely moving it forward by roughly a year. And, as we discussed previously, our robust balance sheet places us ideally to make this move.
Kristine Liwag
analystThen as a follow-up, Kyle, during your prepared comments, you noted the eIPP initiative essentially moves the business model ahead by 1 year. Could you discuss what the ideal result from eIPP would be? I mean, how many flights — what might this appear like this summer? And what might it appear like in 3 years?
Kyle Clark
executiveSure. I mean, just a few points regarding that. For us, the eIPP program isn't solely about aircraft. It begins with revenue and the clarity we're already receiving on charging system deployments and engagement with our customers. Remember, BETA’s approach is to sell the aircraft directly to customers. That really accelerated their involvement in areas that might be a bit less obvious, like service and maintenance, training, all-weather operations, and building familiarity with the aircraft earlier than we’d anticipated. As for the business model itself—which was genuinely intriguing—our original plan was that once type certification was completed, all those materials would go to our operator partners, who would then seek a 135 certificate or something comparable. That process would involve ConOps development and many other systems, followed by a gradual ramp into operation, or entry into service. With eIPP, we can bring all of that ahead and at the same time work alongside our partners in the 135s on every ConOps candidate while we increase production — and as anyone with long production experience will tell you, you never jump from 0 to 100 in 1 day. That takes engineering work too. It involves development work, supply chain maturity, quality systems, supplier quality — every one of those has to mature. So what eIPP gives us is the ability to take that ramp and, once again, layer it together with the aircraft type certification program, the 135 development, and the production ramp. The impact is highly nonlinear—it removes items from the sequence while simultaneously layering them together and pulling the schedule forward. In my view, calling it a one-year acceleration of our business is on the cautious side; the actual gain might exceed that.
Ron Epstein
analystIn the event that eIPP turns out to be extremely successful, how should we think about the possible investment that would be needed, just to give people a sense of perhaps how to model that if BETA indeed works, which all of us hope and expect.
Herman Cueto
executiveYes. Ron, I'm eagerly waiting to find out where the ultimate awards land. But if we turned out to be very successful in the eIPP, you could see an investment somewhere between — I'll give a wide range, $75 million to $125 million, something like that.
Kyle Clark
executiveRight. To build on that point, as Herman mentioned before, this isn't a fresh investment. What we're doing is pulling forward spending we'd have done down the road regardless. And in the same way production ramps up, the cost reduction trajectory — going from those early, low-rate initial production jets to full-rate ones — will also come sooner. So much of that spending, once again, was going to occur no matter what. The difference now is we can move it up and get those aircraft built while type certification is still underway.
Ron Epstein
analystUnderstood. That's very clear. And Kyle, during this call you brought up the engineering work required to ramp. Could you expand on that a bit, just so people get a sense of some of what you're dealing with to bring the production system to the level you need, and roughly when you expect it to get there?
Kyle Clark
executiveYeah, absolutely. I'd say one insight Sean Donovan, who serves as our Chief of Operations, carried over to BETA from Tesla was the importance of surfacing problems in production right away. Our approach, then, is to stand up a production line — take our battery line or our wing line, say — and operate it at full rate for some stretch of time. So imagine the battery line running at full rate for 5 days, then halting for 5 weeks; that lets us surface the pinch points on the line. After that you bring in engineering resources — usually production or manufacturing engineering, occasionally design, though primarily production and manufacturing — at the spots where those pinch points appear, be it data processing, actual assembly time, inspection, robotics, any of those, and we resolve them. And that requires engineering. So if a laser welder needs cool downtime, we surface that very early. Then we bring in — we bring in automation where it fits. Just recently on our battery line, for instance, a plasma surface preparation system got fully automated after it turned out to be a pinch point unexpectedly. That meant manufacturing production engineering had to balance that line. This also extends all the way back to kitting and supply chain and inventory management, where we rely on a highly visual manufacturing system; we design tools so that when screws, bolts and nuts arrive on the line, they're positioned in the way the assembly technician will use them. It supports our quality, it supports our speed. And finally, the last item that's been a major focus of engineering and production, Ron, is the automated — the use of automated tools for inspection documentation. So using Wi-Fi connected screw drivers effectively to map the angle, the torque and the position of every screw we install drastically cuts down the human check boxes that have to happen; those are the kinds of engineering investments we're making in manufacturing.
Sheila Kahyaoglu
analystPerhaps regarding just a couple of items. To begin, I'll address the backlog. You mentioned a backlog exceeding $4 billion before '26 wraps up. Could you discuss what's driving that, your visibility toward achieving it, and the role defense plays in it too, please?
Kyle Clark
executiveCertainly. I mean, see, we — essentially at this very moment as this meeting happens, are gaining tremendous visibility. A stack of paperwork sits on my desk at this moment covering transactions poised for completion. Yet we're lucky enough to be able to ensure those transactions' conditions prove advantageous and consistent with BETA's rollout strategy; and just this morning while we were preparing for this call, I observed that our counterparts completed an agreement that significantly reduces that backlog target for this year concerning aircraft. Thus our visibility is quite strong. When the materials were being prepared, it was somewhat weaker. Currently it's improved further. That involves commercial operators who've discovered uses for the electric aircraft in locations we think will experience highly effective entry into service. Frequent operations, inexpensive, fairly limited distance, beginning with cargo, medical and logistics. And those are the kinds of operators we're teaming up with.
Herman Cueto
executiveYes. Sheila, I’d like to underscore what Kyle just said at the end. Our backlog criteria are extremely demanding; we choose our customers carefully. We’re looking for solid launch partners—partners who will place sizable orders and put down deposits—so the standard is quite high. And, as Kyle mentioned, it was great to learn that certain documents were signed early today, which will make a substantial contribution toward reaching that $4 billion backlog, and we’ll be sharing that news soon.
Sheila Kahyaoglu
analystUnderstood. Then may I ask about EBITDA — the range is quite broad, from $305 million up to $395 million. How should we interpret that? What shifts after Q1? Is it G&A, R&D? How should we think about both the EBITDA range and its cadence?
Herman Cueto
executiveSure. Here's what I'd say — during the first quarter, we will definitely be spending more, exactly as we did in Q4, when we were purchasing materials with long lead times. So that pattern will carry on through Q1, and afterward it levels off once we reach the second quarter and the back half of the year. That broad range exists because — this business moves quickly, and we never want to find ourselves forced to decelerate anything. On top of that, new investments always arise, so we simply included that wide range to guarantee we retain the flexibility to operate the business the way we prefer.
Andre Madrid
analystIs there any way for you to give us a rough idea of how much revenue each IPC bid might bring in? What might that look like on the charger side, the aircraft side, or both? Any detail at all on how significant this becomes?
Herman Cueto
executiveSure, Andre. This is Herman. Let me begin, and perhaps Kyle can add something afterward. At this moment, I don't believe we're ready to discuss specific revenue figures. The OTAs definitely have to be worked out through negotiation, and we'll have a clearer picture after that. Still, the way I'd frame it is that potentially 3 streams of revenue exist. The first comes via charge. Training and maintenance would be the second. Aircraft monetization would be the third. So regardless of whether an aircraft ends up rented, leased, or eventually purchased, that's roughly how I'd view those revenue streams. And here's a key thing to note: the operators we teamed up with for eIPP are in fact our customers within the backlog. So I believe that deserves highlighting. I'm not sure if...
Kyle Clark
executiveThat's a really good question. So here's the thing — when someone places an order for 25 or 50 units, and we place 3 or 5 aircraft into their eIPP program, and we're collecting a lease payment across the 36 months of that program, that's wonderful. But what we're really after goes well beyond near-term revenue. Much like what happened with the General Dynamics, Textron, GE, and Embraer jobs, what we're doing is sowing seeds that will grow into far bigger orders down the road. Herman brought this up a few minutes ago. The eIPP deserves that same frame of mind. We will generate solid revenue from it. And incidentally, when you look at it per unit, on a margin per unit basis, the propulsion systems we've been selling are extremely profitable per unit. Still, that isn't the reason we're pursuing this. We're pursuing it because these things scale into something far larger. Once these aircraft are out there in the world — and naturally, running an aircraft involves far more than just the aircraft itself. I believe that's common knowledge. And the major pieces include service, training, maintenance, continuous high cadence operations, plus the trust we must establish with the industry and the market that electric aircraft truly deliver the economic benefits we laid out. So yes, in my view we ought to pay attention to the revenue, since it's genuine money, but it isn't the sole thing we're focused on.
Andre Madrid
analystUnderstood, that's very useful. If I may shift topics to the backlog now. As I understand it, the build you're aiming at for '26 is primarily about the aircraft. Could you discuss what growth you've set aside for merchant supplier work and how that — what that backlog looks like and how much it might expand by the time the year ends — yes, please go ahead.
Kyle Clark
executiveNo, your interpretation of our backlog definition is right; the KPI and aircraft backlog are what we report. That's the main driver of the business, and we now anticipate it growing with strong confidence to $4 billion and beyond. Regarding merchant supply specifically, one of the neat aspects of how this came together, as Herman mentioned, is that we created a few prototypes; we handed them over to a customer; that led to a big order; that order consists of a few parts. From now until type certification, we naturally provide many more propulsion systems plus the research development documentation and other engineering assets and artifacts in support of those programs. So that expands. And with each of these items, one of which is classified, we can't say much about its specifics. But from a revenue standpoint, every phase is roughly 10x larger than the one before it. And it's not like we're just — we aren't a job shop. We aren't pursuing this work for near-term revenue. We're pursuing it since it escalates in that sequence. Our company's revenue has doubled year-over-year. Our company's valuation throughout the 4 rounds from 1 to 2 and all the way up to 8 essentially doubles each round. And that's our approach to merchant supply too; we're sowing the seeds right now; we're providing a handful of motors, 8, 10 motors, whatever the customer requires and they choose us for later phases based on the merits of the technology, the reliability and the performance, first and foremost, and of course, on BETA's capacity to deliver.
Andres Sheppard-Slinger
analystCongrats on everything great you accomplished in the past year and what's happened so far in this one. By this point, I believe most of what we wanted to ask has already come up. Maybe, though, we could return to the eIPP. Kyle, I'm simply wondering whether you might describe how you expect the program to develop. After the programs get announced, after the participants get announced, do you expect every project to launch simultaneously, or perhaps one after another? Do you expect several OEMs to take part in every project at the same time? I'm just wondering how you're approaching this as we move nearer and nearer to the point when those projects get announced.
Kyle Clark
executiveYes. Excellent question. I believe it truly matters to draw a distinction between a demonstration and an operation; when we went into this, our emphasis was operations. We didn't want to head out with 1 aircraft and visit 5 separate states. Our aim was to give 5 aircraft to 1 state, 3 aircraft to another state, 2 aircraft to yet another state and 5 aircraft to one more state, so those aircraft could enter high-cadence operations daily in every kind of weather. Still, that doesn't occur on day 1. No — addressing your very particular questions, are every one of the OEMs moving simultaneously? Certainly not. Right now BETA has accumulated more real-world flying experience alongside customers than any other firm in this sector. I needed to sign an attestation for the Department of Transportation stating that within 90 days of negotiating these OTA contracts, we could be in service. That's precisely so BETA can spearhead the deployment into these states and applications. This stems from the aircraft's maturity, our charging network and the reality that we begin with cargo and medical first before shifting to passenger. Also, we're working with customers that run safe and reliable operations. That sets us apart from other people who have sought this application. So, in a sense, the states chose this. The state chose the aircraft, and we begin with Part 91, we proceed and perform route validation, after which we shift to 135. And should all go well, we'll then begin revenue-producing applications for cargo, medical and logistics, after which we'll shift to the VTOL and after that we'll shift to passenger. BETA is fundamentally unlike other people due to the real-world opportunities we've uncorked internationally and domestically, and we keep — and we plan to keep doing that.
Andres Sheppard-Slinger
analystFantastic. That's really useful. I truly value all of that detail. Perhaps the final one, and this is for Herman. Could you give us some idea about how you're viewing cash usage during this year? I understand you've provided guidance for, or are aiming at, a CapEx figure for the year. I'm just curious whether you might help us fill in the rest, how ought we to be thinking about cash usage, especially once you start increasing production of your aircraft and reach 4.5 per month by the time the year ends?
Herman Cueto
executiveYes. I appreciate that question, Andres. What I'd say is that as of now, under this guidance, not counting eIPP, cash usage should come to roughly $500 million. So should you consider approximately $200 million for CapEx at the midpoint, and should you take the EBITDA range at the midpoint of $350 million, we will have some interest income that will partially offset a portion of that. However, once you combine those 3 components, you likely arrive at roughly $500 million prior to an eIPP investment.
Chris Pierce
analystLooking at the deck and that VTOL certification slide, I'm just trying to understand how it ought to progress across this year. I realize you touched on this during your remarks. My understanding is we shouldn't anticipate any change on that front, correct? But on the CTOL side, we should see some progress. And once that happens, it lets the VTOL side accelerate when it finally starts moving. Is that the proper way to view it?
Kyle Clark
executiveYeah. I might phrase it somewhat differently, yet in concept, that's precisely how you should be thinking about it. Here's an illustration: regarding CTOL, suppose we tracked how the propulsion system within those bars is advancing — naturally, those bars advance far more rapidly since we constructed — I think we're the sole business in this sector to have constructed conforming hardware that entered credit testing. We accomplished that extensively over many units in the motor. Actually, only this morning, a report came in from the team indicating we finished the durability test exceeding 1,300 flight cycles for credit across a variety of different environments; that isn't — that appears solely on the H500A engine certification test bars. It doesn't appear on the CTOL. Extending that logic, on the VTOL bars, there's a modest gap, roughly 15% of requirements planning, plus a somewhat bigger gap regarding implementation as we transition from CTOL to VTOL. So those bars are kept apart to provide complete transparency for all of you concerning what must occur for every one of these certification programs; however, what must occur stays confined to the gaps between the earlier validation verification or certification activities and the later ones; therefore you ought to see — anticipate seeing progress on the A250 certification program during this year; we've performed an enormous amount of vertical flying, plenty of varied experimentation. I think we're the initial business to truly secure delegation for our lift props with a DER. We've obtained further delegations throughout the CX300. I believe we reached roughly 80 delegations during the previous month. So these are genuinely significant, I'd call them, nondirectly measured elements of progress that produce measured elements of progress too. Yet at its core, regarding your question, you'll observe progress on every front, and that progress reflects the gap needed between the propulsion and the airplane, the airplane and the aircraft.
Chris Pierce
analystAll right, that's great. And so, if I understood you right regarding eIPP, is it possible you'd operate both CTOL and VTOL planes? Actually, my assumption had been that it would primarily be CTOL, yet could VTOL flights also occur within this program during this year?
Kyle Clark
executiveCorrect; actually, all of the applications we've submitted include CTOL as well as VTOL aircraft. My apologies if I emphasized CTOL, since that's what we're bringing to market first; right after that, we move straight into VTOL. That's exactly how the whole business model we've built works. What's great about that is that those we serve gain experience with electric aircraft training, charging, battery management, and operating a fly-by-wire system, which is naturally common across every aircraft we make, and afterward they transition into VTOL. As a matter of fact, our training group — and I believe I shared this with you or another analyst before — has created the complete training curriculum for the VTOL aircraft. It consists of 5 modules. Modules 1 through 3 out of those 5 cover the CTOL aircraft, in which the systems, the fly-by-wire system, and everything else tied to piloting the ALIA aircraft get taught across those 3 modules. After that, 2 more modules address the vertical takeoff and landing versions. So for our customers, that provides a really simple pathway. Naturally, charging stays identical, and maintenance is roughly the same. So indeed, we do — we will operate eVTOL aircraft if we are chosen for the eVTOL integration pilot program.
Kristen Costello
executiveTo make that a bit more concrete, I see major upsides from this program, particularly in the VTOL space, where it benefits both us and our customers by allowing them to accomplish everything Kyle mentioned in an earlier question—compressing those training schedules and so on before full type certification, so these can enter service sooner. That brings enormous value to us, to customers, and to the entire industry.
Kyle Clark
executiveYes. Thanks, everyone. I appreciate all of you staying with us on this call. As a sort of wrap-up, what excites those of us at BETA is that everything is coming together; and our stepwise market-entry strategy is earning respect and being reflected in the ATC modernization work, at the Department of Transportation, and at the FAA. We have terrific leadership there—Duffy, Rocheleau, Bedford, and Edwards—all rising to the occasion, delivering on their commitments, and providing us a platform and a canvas for deploying advanced air mobility. I believe we've put ourselves in position to win on the eIPP. Manufacturing is set. Training is set. Service and support stands ready, and we've demonstrated a record of safe, reliable flight operations. All of that, naturally, has set us up for cert, but it also has set us up to field these aircraft early. And I think the wisdom behind our business model is growing evident. There's a feeling around BETA that you can sense. You sense it the moment you step into the facilities. Our focus is on completing this H500A certification, and it isn't free of difficulties, but we push past every one of those difficulties each and every day. And the seeds planted with customers across the past several years are ripening now, with second phase and third phase programs within our line of sight. We're simply thrilled to execute on them and watch revenue climb, watch our products mature and, naturally, finish certification. So I'm energized, and I truly appreciate everything all of you do for us and alongside us, asking questions and critiquing our business, because I believe you'll reach the same understanding as time passes.
Operator
operatorThis concludes today's call. Thank you for attending...
Read the full transcript via the API
You're viewing the first half of this call. Get the complete BETA Technologies, Inc. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.
Get the API View API docs →This call discussed
For developers and AI pipelines
Programmatic access to BETA Technologies, Inc. earnings transcripts and 132,000+ others is available through the
EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments,
full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.
More tools for stock research
OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in BETA Technologies, Inc. or any ticker on your watchlist.
StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.