Champion Iron Limited (CIA) Earnings Call Transcript & Summary

October 27, 2022

Australian Securities Exchange AU Materials Metals and Mining earnings 44 min

Earnings Call Speaker Segments

Operator

operator
#1

Hello, everyone, and thanks for joining us for Champion Iron Limited's conference call on the second-quarter results of fiscal year 2023. <<operator_script>> Today is Thursday, October 27, 2022, and this call is being recorded. At this point I'll hand things over to Michael Marcotte, Senior Vice President, Corporate Development and Capital Markets. Michael, the floor is yours.

Michael Marcotte

executive
#2

Thanks, operator, and thanks to everyone for being on the call today. First, I’d like to direct you to our website, where the presentation we’ll be using today is available, and I’ll also note that forward-looking statements will be made during this call. For further details about forward-looking statements, risk, and assumptions, you can also review our MD&A, which is likewise posted on our website. Joining me on the call today are David Cataford, our CEO; Michael O’Keeffe, our Executive Chairman; Alexandre Belleau, our COO; and Donald Tremblay, our CFO. I’ll remind you as well that all currencies stated on the call are Canadian currency, unless otherwise stated. Shortly, I’ll hand it over to our CEO for the formal portion of the presentation. At the end, we’ll leave it open to our Executive Chairman for closing remarks. With that said, I’ll turn it over to David.

David Cataford

executive
#3

Hi, everyone, and thanks for joining the call. I'm really glad to have the chance to walk through the highlights of our second quarter for fiscal year 2023. The concentrate we produced stands out as the key highlight of the quarter, I'd say. That shows our Phase II is progressing in line with the schedule we set at the outset. We actually handed over the plant roughly 3 months earlier than the original plan called for. The ramp-up is now proceeding as planned. I'm also pleased to note that our logistics systems are keeping pace, since we sold roughly 2.8 million tonnes in the quarter and produced roughly 2.8 million tonnes in the quarter. So as you can see, the entire system is ramping up simultaneously. Iron ore recovery came in near 79%, and we can touch on that. But the most significant highlight, I'd argue, is that all of the tonnes that came out of Phase II grade above 66% iron ore. So despite the volatility that comes with a ramp-up and starting up a plant, we still ensured we remain a high-grade producer, and one that produces exclusively high grade. Cash costs also came down in the quarter as Phase II tonnes ramp up, at roughly $66 per tonne, which let us bring in revenues of roughly $300 million and EBITDA of just under $85 million for the quarter.

David Cataford

executive
#4

Another major point worth noting is that our capital return strategy keeps moving forward, and we've declared a third dividend of $0.10. On the sustainability side, once again, we had another quarter free of any significant environmental problems. What we've also been doing at the site, clearly, is training every one of our employees. With Phase II, we now have roughly 400 new employees at site. So our goal is to ensure that everyone is trained and fully ramped up on all of our safety procedures, so that we keep everybody safe and everyone works the Champion way — safely — at site. When it comes to our community work, I think all of us can take real pride in the fact that your company is among the first to recognize the National Day for Truth and Reconciliation for the First Nations in Canada as a national holiday. So we didn't go with a typical holiday where you simply get a day off. Instead, what we did was hold a day of various events at site and at the head office, with different consultants from First Nations coming in so that we could make sure everybody is trained and everyone understands the differences and the implications of working with our First Nations partners.

David Cataford

executive
#5

What that's done is create a strong partnership with the First Nations group we work with today — and it's also meant that across Canada, both government and First Nation communities have come to see us as a leader when it comes to the relationship we maintain with First Nations. Moving to the market, you've likely noticed that iron ore pricing was volatile during the last quarter. P62 fell more than 25% in the quarter before. Sea freight also came down by more than 20%. So that helped — sea freight, that is, during the quarter. One thing worth noting, though: if you go through all the reports, there's plenty of negative commentary out there in the world. But when you actually look at the World Steel Association data, it's the first time in roughly a year that we've seen positive steel consumption results coming out of China. So August and September were 2 solid months and were up year-on-year. So we do see some potential light and some pickup in the industry on the steel side. But as we'll get into on the coming slides, our real focus is on our niche market of DR-grade material and the high-grade material market, and we'll be able to talk about that in our growth initiatives section.

David Cataford

executive
#6

On the operations side, I'd say the standout item is that site production has risen roughly 50%. That increase stems from Phase II coming up to speed as planned. We remain confident about hitting our production target by year-end and reaching nameplate capacity in early 2023 on the calendar. So all of it tracks with the Phase II project. On iron ore recovery, you can see we're still somewhat below the 83% target. That's expected while ramping up — as tonnage rises and the plants become less unstable, we'll be able to fine-tune toward 83% and possibly beyond, just as we did with Phase I. It's essentially the identical flow sheet to Phase I, and it has behaved in exactly the same manner. There is one addition in Phase II, where we've brought in extra equipment known as reflux classifiers, which should let us potentially lift recovery down the road. A key highlight is really that product quality stands at 100%, so that's genuinely to the benefit of all our clients.

David Cataford

executive
#7

And I think that's really the key takeaway as Phase II ramps up — ensuring each and every tonne we turn out is high grade, and that we keep strengthening our standing in the high-grade market. You may have noticed as well that our strip ratio came in somewhat lower over the quarter. That wasn't a hiccup. It's to be expected. It was all part of the plan. So what's happening at site — bringing new trucks online, bringing new shovels online, new drills, training new employees — we had anticipated a somewhat lower strip ratio this quarter as Phase II tonnage ramps up, though we do expect it to return to normal, trending back to our strip ratio, the life of mine strip ratio for Bloom Lake Phase I and II. On the financial side, well, even with a volatile quarter for iron ore, we managed to stay essentially flat on EBITDA at roughly about $85 million. That comes thanks to the additional tonnes produced with Phase II, which has let us declare our third dividend of $0.10 per share. Looking at costs, as we said in the highlights, even with a bit of volatility in diesel and explosive pricing, some stripping elements, some maintenance and shutdown costs, realistically, with the positive impact of Phase II, we've brought the cost down to about $66 per tonne.

David Cataford

executive
#8

As we noted last quarter, part of the cost increase was tied to the fact that Phase II was — well, basically, we're carrying the costs tied to Phase II, the fixed costs tied to Phase II, without getting the benefit of the additional tonnes. And as those tonnes ramp up into production, we could see this normalizing our cost, and it will keep normalizing over the quarters ahead. On provisional price adjustment, so as you may recall, roughly 0.7 million tonnes of our material was on the water when last quarter ended, and we had booked it at $138. The realized price once those tonnes reached our clients was $116, which hurt the quarter by roughly USD 5.3 per tonne. When this quarter ended, we had roughly 1.3 million tonnes on the water, booked at approximately $112 per tonne. If we look at the average selling price, again, there's a bit of noise tied to provisional pricing, but I think the key part is that we fully benefit from the P65 index, and when you average these numbers out across the year, well, you'll see the full benefit of the P65 index, or the high-grade index.

David Cataford

executive
#9

On the cash side, during the quarter we brought our cash up to roughly $277 million. Part of that came from drawing on our revolving credit facility. The main reason is that, looking at our current balance sheet, around $75 million is tied up in prepaid income taxes owed to the provincial and federal governments. That's largely because in Quebec, here in Canada, you typically have to pay based on the prior year's results. We've now changed that, but some funds remain tied up with the government that we'll recover next year. So, just continuing to run the company diligently, we drew a little on our revolving facility. But as you know, under the structure we have with our creditors, we can repay that at any time. On the balance sheet, we're essentially at a net zero position between cash and net debt. And looking at our performance over the past 6 months, this has been -- or has allowed us to declare our third semiannual dividend, which was declared at $0.10 and will be paid by the end of November.

David Cataford

executive
#10

When it comes to growth projects, the foremost one right now—and the most significant—is our Phase II. I wanted to show where we stand on cumulative production relative to the schedule we'd set. Not only did we bring the project in 3 months ahead of schedule, but beyond that, our current ramp-up is running a little better than the initial plan. So we're very pleased with how it's going, and very proud of the team for ensuring that even in these challenging times we can ramp up as planned. On the production side, I think what this chart really highlights is how extremely stable we've been with our Phase I over the past 4 years. And now, as we ramp up Phase II, we expect the same stability going forward once we complete the ramp-up on that Phase II project. Looking at the next growth initiatives, the most important one in our portfolio at present is really the potential DR pellet feed project. We're finalizing the feasibility study on it, which would allow us to produce a 69% DR grade material.

David Cataford

executive
#11

So as soon as that's wrapped up, we can go out to the market with an update and start working on the potential plan for constructing this new facility. We're making progress on the Kami project as well. As a reminder for everyone, Kami has the potential for 8 million tonnes per year of DR grade material. There's substantial demand for this material. We've had a fair number of conversations with potential clients who are interested in possibly getting involved with this project. So it's a great resource located just a few kilometers from Bloom Lake, and the feasibility study is moving forward as planned. Turning to our third growth initiative, the pellet plant in Pointe-Noire, we're carrying on with the feasibility study alongside our partner. As you'll recall, we announced a partnership with one of the largest steel manufacturers in the world in order to push this project ahead, and we're working toward delivering that feasibility study next year. Why are we keen to move into DR grade material? And how do we view this as benefiting all of our shareholders? Well, one thing worth noting is how stable the DR pellet premium has remained across these various cycles. Even at a point when iron ore was seeing, you could say, its worst pricing since an index has existed on the P62 and the P65, we observed the pellet premium for DR material sitting significantly above the other volatile elements.

David Cataford

executive
#12

If you look at things as they stand today, in the present market, a premium of USD 75 per tonne over the P65 for DR pellets still exists. Just a few weeks ago, we observed that figure reach $100. So it's clear this kind of material commands a substantial premium. And that's before even taking into account the next few years, when electric arc furnaces begin to be ramped up—since they're being built as we speak and will start ramping up—and demand for this kind of material rises. And each quarter, we keep tracking what might be developing in the market regarding DR, and no projects of scale have been announced that we've seen. So at present, what we observe is that the Bloom Lake pellet feed project stands as one of the only projects capable of meeting that demand, yet we expect that demand to grow in the years ahead. So when you take into account the stable and high premiums for this kind of material, along with the reality that no new supply is under construction at the moment, we view it as a highly accretive project for all of our shareholders. And if we turn once more to why this matters when it comes to producing the DR type material?

David Cataford

executive
#13

Well, as we become more sophisticated in the decarbonization space — I mean, initially, decarbonization seemed to be about electric cars, but in reality it's far broader than that. And increasingly, even automakers are asking, well, how can they cut CO2 emissions tied to building their cars? And each car needs roughly about a tonne of steel, and 1 tonne of steel, when you move to the DR route rather than the usual blast furnace, well, you can cut 1 tonne of CO2 emissions. So looked at the other way, the benefit of making DR-grade material means not only decarbonizing the steel industry, but what we'll begin to see now is growing emphasis on the downstream side of steel and the manufacturers actually using the steel and how they can decarbonize their products. So you can see this has a great impact across all the various producers in being able to decarbonize their different products. So we do believe the big advantage for Champion is moving toward the DR-type material. We have the ore to do it. We have the plan and the people to get there and to continue on our path to becoming one of the greenest iron ores in the world.

David Cataford

executive
#14

Having said that, I want to express gratitude to every employee on site, and then hand things over to Michael O'Keeffe, who will offer closing remarks ahead of the question session.

Michael Marcotte

executive
#15

Thanks, David. So, Michael, do you want to save the questions for the end? Or should I wrap things up at this point?

David Cataford

executive
#16

Perhaps, operator, perhaps we could open it up for questions first in the queue, and then we'll have Michael deliver the closing remarks afterward.

Michael Marcotte

executive
#17

Yes — apologies, Michael.

Operator

operator
#18

<<operator_script>> The initial question will be taken from Alexander Jackson with RBC Capital Markets.

Alex Jackson

analyst
#19

I'm just wondering about the growth projects — when should we expect that technical report for the GRP plant? And after you release it, do you intend to put out the remaining technical reports as well and then assess what the go-forward plan looks like? Or do you just kind of move ahead, perhaps with that fee plan?

David Cataford

executive
#20

Realistically speaking, the DR pellet feed plant could potentially stand alone as its own project. It is therefore able to proceed separately from the pellet project, the pellet plant project, or the Kami project. And we view that as potentially very accretive. So once the final results come in, this is something we can assess together with the board and then return to the market with the next steps for this project. But it doesn't need the other studies in order to potentially move forward.

Alex Jackson

analyst
#21

And then, if I could, just one more question. Regarding those freight contracts, I'm curious about what the thinking was there. Is it really mainly to help with budgeting? Or could there be potential to lock in a premium that you guys viewed as favorable?

David Cataford

executive
#22

Sure — whenever we find a chance to lower our costs, we'll grab it. Hedging isn't our business, but if there are places where we believe we can get the most value for the money, we'll take advantage. We viewed that as a strong opportunity to secure part of our vessels at a discounted premium. So it made sense for us and for all of our shareholders.

Operator

operator
#23

Our following question is from Gordon Lawson at Paradigm Capital.

Gordon Lawson

analyst
#24

I have just a few gentle follow-ups. You mentioned cash costs being much lower than expected. Is that mainly because of the reduced strip ratio? Or did this quarter receive some other unforeseen lift? And what do you anticipate as you ramp up toward commercial production later this year?

David Cataford

executive
#25

We typically don't provide guidance, to be clear. But one key point about this quarter is that the bulk of the effect came from higher tonnes at Phase II. So in the quarters ahead, once the strip ratio returns to what's referred to as 0.9 and the Phase II ramp-up is complete, we'll be in a position to bring our costs back to normal. That said, during this quarter we were already able to bring costs down, largely because we now have additional tonnes tied to Phase II.

Gordon Lawson

analyst
#26

Here's one more question for you. Could you say more about the interest buyers are showing in the higher-grade products, such as the DR or the pellets? And does that create an opportunity to potentially expand 1 or 2 of those facilities so they cover as much as 100% of your sales?

David Cataford

executive
#27

Yes. Thanks for that question, Gordon. So, looking at the market as it stands right now, what we see is, first, no new projects are being sanctioned. Second, there's increasingly more discussion about whether scrap export bans are going to come in across various countries. As we watch the ramp-up toward electric arc furnaces, well, people are going to need scrap. And at this point there are countries that export the majority of their scrap that won't be in a position to do so going forward. Take Japan alone as an example: Japan exports most of its scrap, but as of now all 3 of the largest steel mills in Japan have committed to building electric arc furnaces by 2030. They're going to need scrap. So the business models of those steel manufacturing countries that imported scrap so they could produce their steel, well, they're going to have to change that model. So in North Africa and the Middle East, you can already see some steel manufacturing capability being idled today because they lack access to scrap. So they're exploring solutions that would let them obtain metallics, and one of the obvious solutions is DR grade material.

David Cataford

executive
#28

Demand is coming to us from a wide range of geographies. I realize this is a volatile moment, and there's a modest short-term dip when it comes to the iron ore price. Yet realistically, over the medium and long term, that transition is necessary for people, since they are already fully committed to constructing those electric arc furnaces. So demand is arriving from plenty of different locations — the U.S., Middle East, Europe, and Japan. As for the second part of your question, whether we might move 100% toward DR grade: that is a possibility. We'll begin by potentially building the first one, but we do have the ore in the ground and the capability to go 100% DR feed down the road.

Operator

operator
#29

Craig Hutchison from TD Securities has the next question.

Craig Hutchison

analyst
#30

I've got one more question, this time about the DR feed. I understand the study got delayed somewhat and is now expected later this year. Is it fair to assume that you're now pretty far along with the detailed engineering? And if that's the case, should you sanction the project, could you give us a rough idea of how long construction would take? Also, are there any long lead items that you need to order at this point just to meet some of those timelines?

David Cataford

executive
#31

So I would describe our engineering as thorough, though we aren't yet at what you'd formally call advanced and detailed engineering. When we consider how we're constructing this study, it matters greatly that we arrive at the correct CapEx figure and ensure that, when we make our decision, it's based on genuine numbers rather than an understated figure that would later need to rise by 50% or 60% once actual construction begins. That's the first point. As for possible detailed engineering, that will come after the engineering study, and then we'll be in a position to assess all the long lead items, which are relatively straightforward to secure. It's the — a portion of the electrical work, the mill are largely the long lead items. And once that feasibility study is complete and we've held discussions with the Board, should we choose to proceed, those are the first things we'd be able to order, and we're already talking with the various manufacturers so we can grasp the lead times in today's market. So I'm quite confident we can meet the timeline we'll present once those results come in.

Craig Hutchison

analyst
#32

And so, once you get the go-ahead, what's the rough timeline for building it?

David Cataford

executive
#33

Looking forward, that window runs from 2 years up to roughly 30 months, and it hinges on when we truly make the call to proceed, particularly if we've already placed orders for certain long lead items.

Craig Hutchison

analyst
#34

All right, that's great. Now, regarding the off-site infrastructure, is anything holding you back at this point from reaching nameplate capacity on either the pork side or the rail side?

David Cataford

executive
#35

On the port or rail side, I'd say the key thing at the port is getting the stacker reclaimer build completed — every part for the state stacker reclaimer has arrived at the site and assembly is underway right now. So we don't anticipate any problems there. The port's bill has held up remarkably well, even through these tough times. The teams at SFPPN have therefore done a tremendous job, and we're very pleased with how this is progressing. And looking at where we stand today, we can sell every tonne we produce, and we don't foresee any issues in the months ahead as we complete our ramp-up so those tonnes can reach the market.

Operator

operator
#36

Dalton Baretto with Canaccord Genuity has our next question.

Dalton Baretto

analyst
#37

David, my first question sort of connects to what Gord was asking you. You make such a compelling case for the DR product. But what's holding you back from simply doing all of Bloom Lake Phase I and Phase II production at this moment?

David Cataford

executive
#38

Okay, so first, we do have specific agreements in place for blast furnace pellets. So as we shift that blast furnace-type material — as we move toward this DR-grade material, and our customers do the same — we have to be able to adapt, but we also need to fulfill our various contracts. As we take risk out of this project and get the results, the first step for us is to go to 8 million tonnes, and then, depending on where the market stands, to be able to go to the full 16. But I think it makes sense to stage that rather than necessarily going 100% right now toward this, for one, to keep the contracts we have in place and the good relationship with our clients, to make sure we're there to help them transition toward that DR-grade-type material.

Dalton Baretto

analyst
#39

So when you were putting together the operator that's in place now, how much scalability are you building in, so to speak? I mean, are you deliberately over-sizing particular infrastructure because you expect that eventually you'll convert the next 8 million tonnes as well?

David Cataford

executive
#40

Yes. So the way this project is being constructed, it really is a stand-alone 8 million tonne per year kind of box that potentially could be doubled. But there aren't many advantages to being able to over-scale it, because if you do that, you'll be installing a larger mill than what you need, which is typically your bottleneck. And that's pretty big CapEx numbers and for an inefficient sort of transition because let's say we would do at 10 million tonnes and then want to upgrade the full 15, well, then you'd have to build a smaller plant beside it with different equipment, and I don't think that's the best way to operate. We prefer to have the same equipment to make sure that our maintenance costs are lower, that our inventory is lower, and it sort of makes sense for us to do a one box at 8 and then the next one being a sort of replica that one.

Dalton Baretto

analyst
#41

Also, earlier you mentioned a capital expenditure figure of roughly $300 million. Is that still about the right ballpark?

David Cataford

executive
#42

The figure remains roughly in the same range. As you've likely noticed in the market, there has been some inflation. That is the reason we are spending slightly more time completing this feasibility study—to ensure we incorporate the present market conditions fully into it, so we examine the correct figure and base our decision on that correct figure. That accounts for some of the delay you are seeing at the moment, but the teams are nearly done with that project and will soon be able to present the final number.

Dalton Baretto

analyst
#43

So, let's set the DR product upgrade to one side for the moment. Looking at your base operations and the expansion work there, how do you weigh Kami against, say, a Phase III expansion at Bloom Lake?

David Cataford

executive
#44

Yes, it's a Phase III. I mean, we've alluded to it, but we haven't really talked about it much. The reason is that the first thing we need to do with Bloom Lake is update our resources. So if you recall at the time of Cliff, well, there was roughly about double the resources at Bloom Lake compared to what we have in our current plan, because we designed a very low iron ore price for our resources. We're updating that right now. Once the resources are updated, we'll be able to start working on the plan to get a potential Phase III out of Bloom Lake. So in terms of steps, we'll update the resources. If we're able to prove that it makes sense to get a Phase III, we'll start working on it. But if we started working on a Phase III right now with the current mine plan, we'd only have about a 12-year period, life of mine, which doesn't make a lot of sense. So we need to make sure that we update those resources to have a full plan associated with the potential Phase III.

Dalton Baretto

analyst
#45

And then one last question. I mean, how does the timing on that work with respect to the updated resource?

David Cataford

executive
#46

Right, the update is underway at the moment. So in terms of the revised resources, we ought to be able to get to market quite quickly. Dalton, maybe just a bit of color on that. Usually, we refresh that at the close of our fiscal year.

Operator

operator
#47

Stefan Ioannou with Cormark Securities has the next question.

Stefan Ioannou

analyst
#48

To kind of build on what Dalton asked, it's obviously great to see the Phase II, and clearly you've got a lot going on with the various DR initiatives. Looking even further ahead, whether that's the Phase III or what you might call a Phase IV, is any work underway at the moment on the broader regional exploration package? Or is that more or less on the back burner right now while you handle all the DR upside?

David Cataford

executive
#49

Yes. At Champion, our back burners are quite near to us. So we don't — we're also working on that. We view those as possible resources going forward. For us, what's happening at present is mainly just consolidating every resource we hold in that sector and doing some additional definition drilling. But realistically, the primary focus for us at this moment is really the DR pellet feed — to properly understand that, and then to properly understand Phase III versus the Kami project. So the next portion is obviously for further ahead in the future. But the size of what we have in the ground is comparable to the ore you have in cement do. So in what we believe is a much better jurisdiction. So there's some great potential with that, but that's a few years down the line, Stefan.

Stefan Ioannou

analyst
#50

And just — I mean, I guess where Phase III is concerned, is there then sort of a rivalry between a Bloom Lake Phase III and moving Kami over to Bloom Lake? Or could both potentially happen simultaneously? Or how would you sort of look at that?

David Cataford

executive
#51

Yes. Whenever we evaluate CapEx projects, generally speaking, they're all in competition with one another. So I mean, even the pellet plant compared with Kami or a Phase III — I think the next project we've got lined up makes a whole lot of sense, provided we get the right numbers and the board approves it, being the pellet feed project. But looking at the other projects, they will all be competing. Our aim is to generate more value for our shareholders. And I think we're 100% aligned on that, since management and directors hold more than 11% of the business. So we want to make sure every CapEx project competes with the others.

Operator

operator
#52

Our following question is from Lucas Pipes at B. Riley Securities.

Lucas Pipes

analyst
#53

Let me ask a quick one as well, on growth, and perhaps at a somewhat higher level. The world feels a bit more uncertain right now than it did a year ago, for instance. How does that play into your appetite for growth? Is this a good moment, since you might expect some of these inflationary pressures to ease and you're able to gain market share? You said many of your peers aren't growing on the DR side, for example. How do you weigh growth against a more uncertain macro outlook?

David Cataford

executive
#54

Absolutely. I appreciate the question. I think the key point worth highlighting is that construction of these electric arc furnaces keeps moving forward. As a result, we believe demand will rise. When you consider what would be required for most of the world's ore to potentially reach DR grade, it's extraordinarily costly, and not many locations or jurisdictions globally are fortunate enough to have the quality of iron ore that we possess at Bloom Lake and subsequently at a trough. So we view that as a distinct edge. Now, when we make our investment decisions, they still have to be sensible. Clearly, the market is volatile at present. We currently observe DR pellet material trading on the order of roughly USD 25 to USD 30 per tonne, which makes examining projects at that kind of level extremely accretive for us. That said, it's something we'll be watching closely over the coming months, and if and when we do potentially reach our decision, we must ensure it remains accretive.

David Cataford

executive
#55

We'll track where the market is heading, but my honest view is that with no fresh projects coming and demand set to rise, the DR market holds a lot of promise.

Operator

operator
#56

<<operator_script>> Our following question is from Jacques Wortman at Laurentian Bank.

Jacques Wortman

analyst
#57

Solid quarter. Would you mind walking through those new freight agreements signed for 2023 once more? I think a few details may have slipped past me, along with what they could imply for the premium you'll be paying to C3 overall. And then, secondly, a quick clarification point. The DR feed product feasibility study doesn't envision pellet production, does it? Those premiums you're showing on Slide 19, I believe, arrive later, with the second feasibility study. I just want to be sure I'm crystal clear on that.

David Cataford

executive
#58

Yes. Thank you for that question. So with the DR pellets, there's an index you can use to track that figure. So we can see it. As for DR pellet feed, that tends to be evaluated on a case-by-case basis. So we watch the various sales globally, hold solid conversations with traders, and we're able to track those kinds of prices, since DR pellet feed receives part of the DR pellet premium. So we're keeping a fairly close eye on this, though DR pellet feed has no official index. So when we mention that $25 to $30 per tonne premium for DR pellet feed, well, that's the intelligence the market is giving us. Regarding the freight agreements, now, we didn't reveal the actual price. But basically, if you consider what we had historically, we usually pay the C3 index plus a 25% markup, owing to the greater distance from Sept-Iles, and this applies to our worst route, which is to China. So we do gain from improved pricing terms when we sell nearer to home. But when we can lock in some premiums at low 25%, that's when we potentially secure vessels for the quarters or years ahead.

David Cataford

executive
#59

We managed to lock in a price that's considerably better than that 25% premium. That's the reason we've arranged this for a number of vessels for next year.

Operator

operator
#60

That brings us to the end of the Q&A. I'll hand things back for some closing comments.

Michael Marcotte

executive
#61

At this point I'll hand things over to Michael Keith for the closing remarks, please.

William O'Keeffe

executive
#62

Thank you, Michael, and thanks to you too, David, for that detailed rundown on the quarter. It's a pleasure to be able to relax and take in those presentations as well as the questions that come through, since it helps me personally grasp where we've been and where we're headed. And when you look back, someone asked me where we'd want to be, and I'd really like to be at the point in 2 years' time when we're launching a product with 8 million tonnes of blast furnace feed and 8 million tonnes of pellet. We've managed to hit all of those targets as we've moved forward. And I recall in 2018, we were hoping for an iron ore price of roughly $80 to $85 a tonne to justify what we're actually doing, which is getting this whole plant going after a somewhat expanded outlay of capital. So for us, it was easy pickings to get things underway with the team in 2018. We delivered it on time and on budget, and that's exactly the situation we have today, and with Phase II, you're seeing what's taking place there. So we've also been quite lucky with timing, because prices have worked in our favor, and it did -- we all recall what happened in Brazil when the dam collapse pushed the iron ore price up, but I think it also shows how fragile the world's supply-demand balance is.

William O'Keeffe

executive
#63

And honestly, at this point I don't believe that has shifted much at all. What we aren't observing, as David mentioned, is new projects being required to come online, and the capital expense right now with the iron ore price returning to roughly $90 a tonne for the 62 and approximately 100 hours. But it truly tells you that, in my view, the world will be side base for a short while, yet we've managed to get through this stretch across the last 3 or 4 years and capitalize on the elevated price to build out Phase II and reach the cash position we hold today with no massive debt and a strong net cash position enabling us to pay dividends now. And I believe many people didn't anticipate that. And to me, that's complete confidence in the team we assembled to accomplish that. And it's remarkable. So if we take that window now looking ahead, as I mentioned, I'd like to be operating 2 years' time. I do observe, as David pointed out, some very robust demand for our material, which will be our pellet feed in the Middle East and in America, I think the Americas is genuinely going to see some strong growth over the next couple of years and demand for steel.

William O'Keeffe

executive
#64

So for us, looking back at, say, 8 million tonnes — right now 50% of our tonnes go to China. I won't claim China is going to disappear, but 50% of our tonnes, 8 million tonnes a year, head in that direction, and that's obviously the highest freight cost for us. So if we're able to redirect that tonnage into a different feed, into the Middle East and into other areas we're examining, and also North America, that's obviously a huge saving, and it flows straight down to our bottom line. So it's something that's very, very doable, and I see the strength in those materials as our real future. Why wouldn't we go to 100%? I think it comes down to the cost of capital, and taking on 100% risk in doing something like that isn't in our nature. So I think a phased approach is better for us. I've heard the stories about Phase III. We'll go through that process. But remember, at the moment, all the capital we spend sits on top of the capital that was already there. So our next decision has to be made very carefully if we're going to spend a huge amount of money on making raw materials.

William O'Keeffe

executive
#65

But personally, I don't believe that's what we should be doing tomorrow. What tomorrow calls for is engaging with this market at the point where I expect us to be heading. And when we reflect, we ask: where will those tonnes originate from at that stage—or the several pen tonnes in Australia? Globally there are 30 tonnes, yet every one of those tonnes is bound, or presently committed, to blast services—a material stream that is vanishing. So what lies ahead, as we see it, is this: regardless of how you handle those Pilbara tonnes, upgrading them to the grade Electric Arc Furnaces demand isn't possible. Whatever goes in is what comes out. Therefore the content within those ores does not disappear. So realistically, only 3 locations on earth supply such feeds. Brazil is one. Their grinding capacity is constrained, since the prime material ends up in tailings. That means reaching 69% F—the level we will upgrade to—is beyond them. And we are fortunate in the laboratory work, possessing a mineralogy that lets us genuinely upgrade to that level and strip out all the digest rotation plan, the process situated ahead of the pellet plant.

William O'Keeffe

executive
#66

So for us — and the third one is clearly Ukraine, and there's no way we can be purchasing tonnes down there at present. So that genuinely leaves us as the top jurisdiction globally when it comes to satisfying this demand. And the other major question for the world is where the power will come from for these electric arc furnaces and electric cars. I think people are going to be paid — how do they pay for the electricity for their electric cars, is certainly so extreme. But in any case the world is changing and we want to adapt alongside it, which we're — I think on this call, we want to give you confidence that we're well on top of where we believe the market is heading, and that we'll be able to meet that demand. And once again, thank you, everyone, for your support and I'll close off on that night. Good evening, good morning.

Operator

operator
#67

Thanks. That brings today’s conference call to a close, everyone. We appreciate all of you joining us, and please go ahead and disconnect your lines.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Champion Iron Limited transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.

Get the API View API docs →

This call discussed

For developers and AI pipelines

Programmatic access to Champion Iron Limited earnings transcripts and 132,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Champion Iron Limited or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.