Constellium SE (CSTM) Earnings Call Transcript & Summary
April 29, 2026
Earnings Call Speaker Segments
Jason Hershiser
executiveThanks, Shannon. I want to extend a welcome to all of you for our earnings call covering the first quarter of 2026. Joining us on this call are Ingrid Joerg, our Chief Executive Officer, and Jack Guo, our Chief Financial Officer. Once we finish the presentation, there will be a Q&A session. You can find a copy of the slide presentation for today's call on our website, constellium.com, and this call is being recorded. Before we get started, I'd like to urge all of you to check out the company's website and review our recent filings. This call might contain forward-looking statements as defined under the Private Securities Litigation Reform Act of 1995. Those statements include things like the company's anticipated financial and operating performance, future events, and expectations, and they may involve known and unknown risks and uncertainties. If you want a summary of the specific risk factors that could lead to results differing materially from what's expressed in those forward-looking statements, please look at the factors laid out under the heading Risk Factors in our annual report on Form 10-K. All information in this presentation reflects the date of the presentation. We take on no obligation to update or revise any forward-looking statement because of new information, future events, or otherwise, unless the law requires it. Also, today's presentation contains information about certain non-GAAP financial measures. Please refer to the reconciliations of non-GAAP financial measures included in today's slide presentation, which supplement our GAAP disclosures. With that said, I'll now turn the call over to Ingrid.
Ingrid Joerg
executiveThank you, Jason. Good morning, good afternoon, everyone, and I appreciate your interest in Constellium. Before we get going, I'd like to mention how happy we are with what we achieved in the first quarter, which included record Adjusted EBITDA; on top of that, we're lifting our guidance for the entire year and anticipate that 2026 will be a record-setting year for this company, for both Adjusted EBITDA and free cash flow. Let's turn to slide 5 and go over the key points from our first quarter results. I want to begin with safety, which is our top priority; we posted robust safety results in Q1, with a recordable case rate of 1.16 per million hours worked, compared with 1.91 in 2025. Even with that solid accomplishment, there is no finish line on our safety journey. We keep our attention on this vital priority each day, which includes hitting our safety goal of bringing our yearly recordable case rate down to 1.5 per million hours worked. Now for our financial results: shipments came in at 370,000 tons during the first quarter, since greater shipments in A&T were canceled out by reduced shipments in P&ARP and AS&I. Revenue reached $2.5 billion, a rise of 24% from the first quarter of 2025, driven by greater revenue per ton, which includes increased metal prices. Keep in mind that although our revenues shift with metal prices, we run the pass-through business model, which keeps our exposure to metal price risk to a minimum. Net income for the quarter was $196 million, versus net income of $38 million in the same quarter a year ago. The primary reasons for that gain were greater gross profit along with favorable movements in other gains and losses during the quarter relative to last year. Measured against last year's first quarter, Adjusted EBITDA rose 93%, reaching $359 million in this year's first quarter, even though that figure contains a positive non-cash effect from metal price lag totaling $97 million. When we strip out metal price lag, which, as you're aware, is how we assess the true economic performance of our business, we posted Adjusted EBITDA of $262 million for the quarter; that marks an all-time high for the company and is 78% above the $147 million recorded in last year's first quarter. Adjusted EBITDA rose in every one of our operating segments this quarter compared with a year ago, and that included a fresh quarterly record for P&ARP and a new first quarter record for A&T. Our free cash flow for the quarter was EUR 5 million, and over that period we gave back EUR 28 million to shareholders by buying back 1.2 million shares. During March, we said that our board had given the green light to a new EUR 300 million share repurchase program, set to expire in December 2028, which will take the place of our current program once our annual shareholders meeting happens this May. We turned in strong results this quarter that exceeded even our own expectations, and that happened despite macroeconomic and geopolitical uncertainty. Throughout this quarter, we saw advantages coming from the way the market is currently behaving — that includes shortages in the supply of automotive raw materials across North America, better conditions in aerospace and TID, plus very strong scrap and metal trends in North America. Prior to handing things off to Jack, I'd like to offer a few remarks about what we anticipate from the Middle East conflict. When it comes to metal supply, we do currently obtain certain metals — slabs as well as billets — from that region, though they make up only a modest share of what we require in total. Because of that, our view is that any effect on our metal supply is minimal right now. We ought to be able to secure alternatives by drawing on metal flows both inside and outside the company. Regarding energy, the majority of our energy expenses are secured through 2026. For the modest slice we opted to keep unhedged, the effect of increased energy prices ought to be slight. Looking at other cost areas, we are starting to observe certain inflationary pressure building in freight, lubricants, and coatings, yet we anticipate the net effect of that will be something we can handle. At present, we do not anticipate any supply chain consequences stemming from a shortage of freight capacity. As for additional indirect effects arising from the Middle East conflict, we have not observed significant end market disruption so far, so we will keep watching it carefully. To close out this subject, the total effect of the Middle East conflict looks absorbable as things stand. What happens over the longer term is still unclear and hard to forecast, yet we have confidence in our capacity to run our business under any conditions. Having said that, I'll pass the call to Jack now so he can walk through more specifics on our financial performance.
Jack Guo
executiveThanks, Ingrid, and I appreciate all of you being on the call today. If you would, please go to slide 7 now. We're going to look at how our A&T segment performed. Adjusted EBITDA came in at $102 million, which is a 24% rise from Q1 of the prior year and marks a fresh first quarter high for A&T. Shipments gave us a boost of $32 million, driven by greater volumes in aerospace as well as TID. Aerospace deliveries got off to a solid start this year, climbing 13% during the quarter on a year-over-year basis. TID volumes rose 18% from a year earlier, since we keep seeing stronger demand stemming from onshoring within the U.S. On top of that, TID got a lift from automotive coil shipments out of Ravenswood, thanks to the present disruption in automotive raw material supply across North America. Pricing and product mix dragged us down by EUR 2 million because of an unfavorable mix this quarter, which was largely balanced out by better contractual and spot prices in aerospace and TID. We faced a EUR 16 million cost headwind, mainly stemming from elevated operating expenses tied to greater activity levels. Foreign exchange and miscellaneous items gave us a EUR 6 million tailwind this quarter, helped by a softer U.S. dollar. Please move to slide 8, where we'll examine how our parts segment did. Adjusted EBITDA reached $ 151 million, up 152% from the first quarter a year ago, setting a new quarterly record for P&ARP. Shipment volumes created a EUR 6 million headwind this quarter, since greater automotive deliveries were outweighed by weaker packaging volumes. Packaging shipments fell 6% this quarter compared with a year ago, even though underlying demand for packaging stayed solid across both North America and Europe. Automotive volumes jumped 12% this quarter, as we gained from the ongoing supply shortages of aluminum automotive body sheet in North America. Pricing and mix delivered a $26 million tailwind, thanks to better prices and a favorable mix this quarter. Costs provided a $ 65 million tailwind, largely from advantageous metal costs amid greater throughput and enhanced productivity at our recycling and casting operations, along with ongoing gains in scrap spreads and a considerably stronger metal pricing backdrop in North America. Foreign exchange and miscellaneous items contributed a $6 million tailwind this quarter. Please turn to slide 9, where we'll look at how the AS&I segment performed. Adjusted EBITDA hit $24 million, a 50% increase over the first quarter of last year. Volume created a $4 million headwind, caused by weaker shipments in automotive and industrial extruded products. Automotive volumes declined 3% this quarter, primarily because of softness in Europe. Although automotive markets in North America remain fairly steady, our Automotive Structures business took a hit from the ongoing supply shortages of aluminum automotive body sheet and how that affected pro-production of certain platforms in the region. Industrial shipments dropped 5% this quarter compared with a year ago, even though industrial markets in Europe have leveled off at these low points. Pricing and mix produced a $2 million headwind this quarter. On the cost side, we had an $11 million tailwind, mostly from reduced operating expenses. Currency movements and miscellaneous items contributed a $3 million benefit during the quarter; that item isn't shown on the slide. Holdings and corporate expense came to $15 million for the quarter. Versus a year ago, holdings and corporate expense rose by $4 million, driven by increased labor costs and negative FX translation effects. During the prior quarter's call, we indicated that holdings and corporate expense should come in at roughly $50 million for 2026. That figure also isn't reflected on the slide. I'd like to give you an overview of where costs stand right now. Our business model, as you're aware, is pass-through in nature. We don't have meaningful exposure to shifts in the market price of primary aluminum, which represents our biggest cost input; when it comes to other metal costs, including the profits from our recycling operations, the past 18 months have brought volatility at levels we've never seen before. After the 2025 U.S. tariff announcements, domestic market aluminum prices — meaning the LME aluminum price plus the Midwest Premium — climbed steeply to record highs. The ongoing Middle East conflict has added further upward pressure on aluminum prices in the global market. Spot scrap spreads for aluminum, primarily Used Beverage Cans, or UBCs, have likewise widened to historically wide levels in today's spot market. These two dynamics stand in stark contrast to the lower metal price conditions and the historically narrow scrap spread levels we dealt with during the second half of 2024 and the first half of 2025, a stretch when we took a negative hit. As we discussed on last quarter's call, the better scrap and metal pricing backdrop benefited us in Q4 of last year, and additional gains came through in Q1 of this year. Going forward, the bulk of our scrap requirements for Q2 are secured at attractive levels, and our team is working relentlessly to lock in more scrap supply for the back half of the year amid conditions that continue to be volatile. Keep in mind that recycling sits at the heart of our business — it demands considerable investment and expertise — and we're determined to capitalize on today's favorable conditions and generate a robust return for shareholders on our recycling investments. Turning away from metal costs: cost inflation persists right now across a number of operating categories, among them labor, energy, maintenance, and supplies, though it has returned to more typical levels. As Ingrid noted earlier, we're starting to observe somewhat elevated inflationary pressure in certain other categories, for instance freight, lubricants, and coatings, stemming from the Middle East conflict, although at this stage we anticipate the net effect will be absorbable. On the tariff front, we've made headway with pass-throughs and other measures that offset part of our gross tariff exposure, and we feel that at this point our direct tariff exposure is still manageable and in line with what we previously expected. The favorable knock-on effects of the tariffs keep building — that includes stronger need for aluminum made here in the U.S., better pricing conditions when set against costly imports, and bigger recycling earnings domestically. Taking everything into account, our view remains that today's tariff and trade rules ought to benefit us on balance. Every tariff consequence we know of, whether direct or indirect, along with each mitigation step we've taken to counter the direct ones, is reflected in the guidance we're giving now. That finishes the cost portion. Our cost results have been solid historically, and we have faith in our capacity to keep a cost structure of the right size no matter what conditions arise. Moving to slide 10, let's talk about free cash flow. During Q1 we brought in $5 million of it. Compared with 2025, that higher free cash flow came mainly from greater segment Adjusted EBITDA, though unfavorable working capital movement and larger capital expenditures each took away part of the gain. As for 2026, our updated outlook is free cash flow above $ 275 million across the entire year; CapEx should come in near $ 330 million, an increase over the $ 315 million figure we gave before.
Jack Guo
executiveConsistent with what we said before, CapEx continues to encompass roughly $100 million allocated to return-seeking CapEx, mostly tied to the key aerospace, recycling, and casting projects we previously announced at Issoire, Muscle Shoals, and Ravenswood; we anticipate cash interest of about $125 million, matching earlier guidance, along with cash taxes of around $80 million, a modest increase over prior guidance, largely driven by the anticipated rise in profitability for the year. We anticipate that working capital and other will consume more cash across the full year than we previously guided, primarily because of elevated metal prices. The free cash flow we generate this year is expected to fund our share repurchase program as well as gross debt reduction. As Ingrid noted before, we carried on with share buyback activity during the quarter. In that quarter, 1.2 million shares were repurchased by us for $28 million. Since the share repurchase program began, 14.7 million shares have been bought back for $221 million. As Ingrid stated earlier, back in March, we announced board approval of a fresh $300 million share repurchase program, expiring in December 2028, which will take the place of our current program after our annual shareholders meeting this May. Let's move now to slide 11, where we'll talk about our balance sheet and liquidity position. Our net debt stood at $1.8 billion at the close of the first quarter, unchanged versus the end of 2025. Leverage was brought down to 2.2x by quarter's end, which sits inside our target range. We anticipate leverage will move lower during 2026 while keeping our target range of 1.5x-2.5x over the long run. As our debt summary shows, no bond maturities come due before 2028, and liquidity rose $38 million relative to the end of 2025, staying quite strong at $904 million as of the first quarter's close; with that, I'll pass the call to Ingrid.
Ingrid Joerg
executiveThanks, Jack. Moving on to slide 13, I'd like to walk through how we currently see our end markets. Right now, most of what we sell goes into end markets that gain from durable, appealing secular growth trends, and in those markets aluminum—lightweight and endlessly recyclable—is essential. Starting with aerospace. Backlogs for commercial aircraft sit at record highs and keep expanding. The big aerospace OEMs are still concentrated on pushing build rates higher for narrow-body and wide-body planes alike. You can see that in deliveries climbing versus a year ago and in loftier near-term delivery targets. Supply chain difficulties have kept deliveries under what OEMs anticipated for a number of consecutive years now, yet demand is largely steady, and it looks like aluminum destocking across the supply chain is letting up. Our core focus areas include high-value add products, and appetite for those stays robust. We stay confident that the long-term fundamentals behind commercial aerospace demand are unchanged, among them rising passenger traffic and stronger need for new aircraft that burn less fuel; on top of that, the business and regional jet market shows stable demand, while space and military aircraft demand is gaining strength. In space and military aviation today, we consider ourselves a top supplier of proprietary aluminum solutions to those customers. As you're aware, we're putting money into more capacity and capabilities, for example our third Airware cast house in Issoire, which should come online by the close of this year, further reinforcing our position going forward. Across all of our commercial, military aviation, and space businesses, we think our product portfolio has no equal in the industry, and our R&D capabilities for aluminum aerospace solutions lead the industry. Now to packaging. Demand is solid in North America and in Europe. The long-term picture for packaging stays positive, shown by consumers increasingly favoring the sustainable aluminum beverage can, can makers in both regions planning capacity growth, and the greenfield investments underway here in the U.S. Aluminum keeps taking share from other substrates in beverages, and because of its sustainable qualities, most new beverage products today come to market in aluminum cans. Aluminum cans recycle extremely well, and we're positioned well to capture the benefits of recycling packaging materials at our Muscle Shoals and Neuf-Brisach facilities. Packaging markets tend to be fairly stable and hold up in recessions, as we've witnessed repeatedly over the years. Over a longer horizon, we still anticipate packaging markets expanding low to mid-single digits in North America and Europe alike, giving our operations in both regions a solid base load. Let's now discuss automotive, which remains somewhat of a different story when comparing North America with Europe. In North America, demand is fairly stable, even though tariffs keep generating a degree of uncertainty. In the previous year, a fire broke out at a facility belonging to one of our rivals located in the U.S. — an extremely regrettable incident that disrupted the supply chain for aluminum raw material across North America. The whole sector keeps ramping up efforts so that the consequences for our customers stay as small as possible. During this year's first quarter, we kept gaining from the situation in both P&ARP and A&T, since we could assist our customers throughout that outage; regarding automotive structure, the effect on us is negative because certain OEMs had to cut output on some platforms that the raw material disruption hit. For 2026 overall, the net effect on our results is positive, and we anticipate that will persist across the year. Demand from automotive customers in Europe is still soft, especially within the premium vehicle segment, where our exposure is larger. European markets face growing Chinese competition and have scaled back their BEV ambitions. Auto output in Europe is additionally dealing with the consequences of the existing Section 232 auto tariffs, because of how many vehicles Europe ships to the U.S. Over a longer horizon, we still think electric and hybrid vehicles will keep expanding, though more slowly than we had earlier anticipated. Secular trends including light weighting, fuel efficiency, and safety will keep pushing demand for aluminum products. Consequently, we stay optimistic about this market over the longer term in both regions, notwithstanding the softness visible at present. As shown on the page, these three core end markets account for more than 80% of our revenue over the last 12 months. Moving finally to other specialties, these markets generally hinge on how healthy the industrial economies are in each region, with drivers such as the interest rate environment, industrial production levels, and consumer spending patterns. Industrial market conditions across North America and Europe turned more stable during the second half of 2025. We think the markets, especially in Europe, have hit bottom following three years of market downturn. Even so, we anticipate that specialties markets in Europe will stay comparatively soft in the near term. We do think TID markets in North America give us certain opportunities right now, since existing tariffs make imports less competitive relative to domestic production; we also think opportunities exist in land-based defense and semiconductor markets, given how the market currently behaves. As you are aware, we concentrate on niche, high value-added applications across most industrial markets. To wrap up on the end markets, we are pleased with the fundamentals in every market we serve, and we firmly believe that having a diversified set of end markets benefits the company under any conditions. Moving at last to slide 14, we lay out our key messages and financial guidance. Our team produced strong first quarter results that exceeded what we had expected, despite macroeconomic and geopolitical uncertainties; we posted record quarterly Adjusted EBITDA, and we gave back $28 million to shareholders by repurchasing 1.2 million shares. I'd like to express my gratitude to every member of the Constellium team for the sustained emphasis on rigorous cost management, generating free cash flow, and maintaining discipline on both the commercial and capital sides. Given how we currently see 2026 shaping up, our target now for Adjusted EBITDA — leaving out the non-cash effect of metal price lag — sits between $900 million and $940 million, alongside free cash flow above $275 million. For 2026, our guidance takes as a given that supportive market conditions will persist through the remainder of that year. Among these are gains from today's shortages in the supply of automotive raw products across North America, a better environment for aerospace and TID, and advantageous scrap and metal dynamics in North America. Our guidance likewise takes as a given that the recent demand patterns in our end markets, which I covered earlier, will carry on, and that the broader macroeconomic backdrop stays reasonably steady. Turning to what lies ahead, we stay intensely focused on carrying out our roadmap toward achieving Adjusted EBITDA, excluding the non-cash impact of metal price lag, of EUR 900 million and free cash flow of EUR 300 million by 2028. Compared with 2026 performance, the primary forces behind these targets include carrying out a range of return-seeking CapEx projects, robust cost management and productivity gains, among them our Vision 2028 program, plus ongoing price discipline. Our 2028 targets further take as a given added growth in markets including aerospace, TID, and packaging. As a reminder, these targets leave out the advantageous scrap spread conditions we see at present, as well as the benefits we anticipate in 2026 from today's shortages in the supply of automotive raw products across North America. In closing, we are exceptionally well positioned to succeed over the long term and stay concentrated on carrying out our strategy and creating shareholder value. With that, operator, let's begin the Q&A session.
Corinne Blanchard
analystMorning, everyone, and congratulations. That was a really solid quarter, and the guidance is off to an incredible start. With that said, I've got a handful of questions about the cadence we might see, particularly 2Q compared with the back half of 2026. Then the second part. Could you walk us through the bridge toward 2027 and 2028? Ingrid and Jack, I believe you both said there's no tailwind coming from the scrap spread conditions we have right now. What's the way to think about 2027 and 2028? Should we picture EBITDA roughly level, or dipping in 2027 before climbing again in 2028? That would really help. Thanks.
Ingrid Joerg
executiveWell, to begin with, many thanks, Corinne, and thanks for bringing those questions. I'll take the first one about cadence, and then I'll have Jack finish it off. As you're aware, our opening six months are typically far stronger. Seasonality shapes our earnings, though it comes from volumes in each of our end markets. The second quarter in particular is usually pretty robust on the packaging side. After that, costs run higher during the latter six months, since we schedule annual outages over the summer and near Christmas, when we carry out our biggest maintenance projects, and that adds expense too. I'll let Jack finish on how earnings are sequenced.
Jack Guo
executiveCorrect. Q2 is usually the peak period seasonally across the year. For now, that's what we anticipate. Looking forward, I'd say there's solid momentum in the business, and we've got solid visibility into the second quarter. As far as the macro backdrop and the geopolitical backdrop go, it's highly volatile, as every one of you is aware. There are greater levels of uncertainty that could affect, or might not affect, overall demand in the second half.
Ingrid Joerg
executiveOkay.
Corinne Blanchard
analystThank you.
Ingrid Joerg
executiveWhen it comes to what we're aiming for in 2028, 2027 should really be viewed as a bridge year as we carry out the strategic milestones we laid out a while back. In 2027, we expect our recycling facility in Issoire to be fully ramped up. Our DC casting Pitney Muscle Shoals will be ramping up during 2027, and the same goes for our Airware cast house investment, which is set to start up at the close of this year. Those investments will either be finished or getting underway, so the result will be something of a transition. We continue to expect a bit of strength in aerospace in 2027, since destocking could be wrapping up. Everyone is aware, I think, that the supply chain is still under pressure, especially when it comes to engines. In our view, 2027 might be the point where things turn. Packaging should stay strong, and based on what we can see right now, TID North America will also be strong in 2027. On the possible negatives, the full effect of the Middle East crisis is unknown to us at this point. We mentioned the inflationary pressures we're currently experiencing. The longer the Middle East crisis goes on, the more it may affect certain end markets of ours, and whether that happens is still uncertain. On the automotive side, we're not anticipating any improvement. We think 2027 will be fairly weak for automotive, especially in Europe, and perhaps somewhat better in North America. Those, I'd say, are the puts and takes for 2027, which is genuinely a bridge year on the way to our 2028 guidance.
Corinne Blanchard
analystThanks. That's really useful. If I could just ask something quickly, on the aerospace side — I noticed you mentioned it and we saw a new contract get signed. Could you share what you expect, or how you see volume compared with that high margin coming from TID? How should we be thinking about that for the remainder of the year? Thanks.
Ingrid Joerg
executiveYes. What we announced recently is a contract spanning multiple years with Airbus, and it covers a range of extruded products shipped out of our French operations, among them proprietary materials such as our Airware aluminum-lithium technology; this truly locks in the solid relationship and partnership we've had with Airbus over a very long stretch of time. You should view it more as an extension and a robust mix for our extrusion business going forward.
Corinne Blanchard
analystThanks.
Katja Jancic
analystHello, and thanks for fielding my questions. Perhaps we can stay with the 26 guidance. Jack, you said your scrap is secured, or locked in, for 2Q, though your team continues trying to lock in some for the year's second half. Could you discuss what your guide assumes regarding scrap spreads for the remainder of the year, or how we ought to think about that?
Jack Guo
executiveYes, of course. Good morning, Katja. As we stated, the second quarter is basically locked in at this point. You know, staying focused on productivity and operational excellence matters; regarding the economics, so to speak, the UBC spread looks more favorable in the second quarter than what we saw during the first quarter. We assume metal price conditions, which are, you know, basically at a record high, will stay quite elevated at least in the near term. Turning now to the year's second half, I'd say more than 50% of requirements are locked in at this point, so a fair amount remains open. You know, the market stays, as you're aware, extremely dynamic — volatile is a word you could use, correct? A number of factors might push you toward a different set of, you know, scenarios. Potentially there's a large degree of variation. For the volume still remaining under our guide, we adopted a sort of middle-of-the-road approach that is, you know, still higher than our earlier expectations for the second half, yet it isn't as aggressive as 2026's first half, though it's nowhere near as conservative as what we saw in 2024's second half and through, you know, the bulk of 2025.
Katja Jancic
analystAll right. It's possible that the free cash flow you generate will rise over the remainder of the year compared with Q1. Share repurchases have been happening. Could you speed those buybacks up relative to what was done in Q1? What's your thinking there?
Jack Guo
executiveYeah, that's a fair question. First of all, I'd say that regarding buybacks, or capital allocation more broadly, we've always tended to keep things balanced; to be more precise about the share buyback, the current tempo of operating that repurchase program feels comfortable to us. As a reminder, it amounts to EUR 300 million across three years. A consistent pace has served us well historically, and we continue to see repurchasing shares as appealing. We intend to keep up a comparable tempo moving forward.
Katja Jancic
analystAll right, thank you.
Bill Peterson
analystHello there, good morning. I appreciate you fielding our questions, and congratulations on both the solid performance and the guidance increase. What I'd like to ask about is something I don't believe you addressed in the remarks you prepared. There's been movement on the Section 232 derivative tariffs. How are you evaluating the possible effects, and what might that mean for your operations — could it be a support for pricing, or what feedback are you getting from customers regarding this?
Ingrid Joerg
executiveI appreciate that question, and thanks as well, Bill, for what you said. My sense is that the most recent adjustments to Section 232 don't have much of an effect on us; there's an extremely small effect within our AS&I business, yet on the whole it simply confirms that these tariffs will remain in place, so we expect the indirect advantages from Section 232 to keep benefiting us. Nothing has shifted in our remaining businesses.
Bill Peterson
analystAppreciate that. Regarding automotive, you said the U.S. is performing better than Europe, and I believe you've picked up some advantage at the margin from that regrettable situation you brought up. In your opinion, should that upside really be wrapped up by the second quarter? Or what's your thinking on how automotive will play out for the rest of the year, across both P&ARP and AS&I?
Ingrid Joerg
executiveYes. On the P&ARP side, right now we feel quite confident that the gain we've been getting from the outage will keep going. We're essentially supplying out of Europe. We're running U.S. capacity flat out, and we're also sending material from Ravenswood into our rolling system so we can get the most out of total capacity. That lets us pick up more qualifications and of course back up customer relationships further than what we have today. AS&I is mainly affected by a slower production ramp on one particular platform. We don't have solid visibility into what the whole year will look like. The financial hit from this is fairly small for the company and, when you consider the net effect, it stays mostly quite positive.
Bill Peterson
analystAll right, and thanks once more for walking us through your perspective — nice work on the quarter.
Ingrid Joerg
executiveI appreciate that.
Timna Tanners
analystHey, good morning, and thanks for providing all those great details. I wanted to dig a little deeper into what you said about Europe, especially regarding autos. We're hearing some questions about BYD producing in Europe and what that means for Constellium, plus any views on whether aluminum or steel gets used more there and in the U.S., since some reports mention a shift.
Ingrid Joerg
executiveAll right, thanks for asking, Timna. Regarding the European auto sector, BYD did announce it would build production in Hungary and Turkey, when you look at Europe more broadly. The vehicles they're assembling contain significantly more steel in their body structures, so we don't anticipate much of an effect from that. Our European business centers largely around high-end automobiles made by the German OEMs, along with some other manufacturers. As of right now, we aren't seeing any consequences. Another thing is that our production is largely localized to serve nearby markets — we typically aren't transporting automotive materials over long distances. Regarding shifts in the U.S., nothing has come to our attention suggesting customers are changing suppliers beyond what happens in the ordinary course. Our expectation is that demand for greater fuel efficiency will persist, and that's the pattern we're observing on both sides of the Atlantic.
Timna Tanners
analystAll right, I appreciate that answer. When it comes to scrap spreads, should they stay where they are now, how much room is there to raise the share of output produced from scrap? In other words, could you attempt to grow that output, particularly considering the constrained markets that might continue across the wider U.S. and, I suppose, Europe?
Ingrid Joerg
executiveI'll begin, and then I'll hand it over to Jack; as a matter of fact, every one of our operations relies on scrap. For the packaging sector, UBC is what we discuss most often, yet we likewise use substantial amounts of scrap throughout the remainder of our operations. Definitely, with all that is happening in the marketplace, we've already been striving to better our metal costs by consuming greater volumes of scrap, various scrap grades, and additionally harder-to-process scrap grades. As you're aware, the sector is shifting toward upcycling the scrap streams available in the market by means of sorting technologies, and we're heavily engaged in that too. Beyond that, we recycle material for our aerospace division, for the TID division, and on the extrusion side as well, recycled content makes up a portion of every alloy we turn out at present.
Jack Guo
executiveTo put it in a wider context, recycling and casting sit at the heart of our operations. When you examine how we spend on capital, particularly the CapEx aimed at generating returns, the money is flowing into recycling and casting projects. That is unquestionably a priority for us, Timna Tanners.
Timna Tanners
analystCould you put any numbers behind the capacity to grow recycling operations? Since billet supplies might run short and that market has tightened considerably amid the smelter outages, is there any room to boost the volume of finished aluminum you turn out from scrap?
Ingrid Joerg
executiveI wouldn't frame primary aluminum scarcity as our primary motivation. For us, this is really a continuous initiative in which we keep consuming whatever scrap we can source from the market, in the alloys and shapes that the market offers. It's also pretty unpredictable, since not all scrap is usable in every application. Optimizing to the greatest extent possible has been our focus for many, many years already. It hinges heavily on having the correct kind of scrap available at the correct time; there's room for us to do better, but it wouldn't represent extra casting output, if you will. Instead, it would mean a reduced metal cost, as we'd be substituting prime metal with scrap across our operations.
Timna Tanners
analystGot it. Okay, thanks again.
Ingrid Joerg
executiveYou're welcome.
Ingrid Joerg
executiveThanks. I appreciate everyone taking an interest in Constellium. It's clear we've begun this year on a remarkably solid footing. During Q1, we turned in results that were the best we've ever posted, and we raised our guidance for 2026; we feel great about the progress we're achieving toward the goals we've set for 2028, and we're eager to share a progress report with all of you in July. Thanks so much.
Operator
operatorThis concludes today's conference. Thank you for your participation. You may now disconnect.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Constellium SE transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.
Get the API View API docs →This call discussed
For developers and AI pipelines
Programmatic access to Constellium SE earnings transcripts and 132,000+ others is available through the
EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments,
full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.
More tools for stock research
OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Constellium SE or any ticker on your watchlist.
StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.