Craftsman Automation Limited (CRAFTSMAN) Earnings Call Transcript & Summary

May 8, 2026

National Stock Exchange of India IN Industrials Machinery earnings 45 min

Earnings Call Speaker Segments

Operator

operator
#1

Good day, ladies and gentlemen, and welcome to the earnings conference call for Craftsman Automation Ltd. Please note that all participant lines will remain in listen-only mode. Once the presentation wraps up, you'll have a chance to ask questions. If you require any help during this conference, just signal an operator by pressing STAR and then zero on your touch-tone telephone. I'll now turn the conference over to Mr. Srinivasan Ravi, chairman and managing director of Craftsman Automation Limited. Thank you, and over to you, Mr. Ravi.

Srinivasan Ravi

executive
#2

Thanks. Good afternoon, everyone, and thank you for being on the earnings call. The presentation has been uploaded. I hope each of you got a chance to take a look at it. So we can begin right away with the Q and A, please.

Operator

operator
#3

Thanks so much. Everyone, we’re starting the Q&A portion now. If you’d like to ask something, press Star and one on your touch-tone phone. To drop out of the queue, enter Star and 2. We ask that you use only handsets when posing a question. Please be aware that certain statements on this earnings conference call could be forward looking statements, which carry risks and uncertainties and aren’t guarantees of future performance. We encourage you to check the disclaimer section in the company’s investor presentation. Also, management won’t address any customer specific queries because of confidentiality obligations. We ask participants to avoid mentioning customer names when asking questions. We also request that you keep to a maximum of two questions at a time so that everyone has a chance to ask. Everyone, we’ll wait a moment while the question queue assembles. The first question comes from Joseph George at IIFL. Please go ahead.

Joseph George

analyst
#4

Hello, sir, and good afternoon. I have one question here. When I examine your…

Operator

operator
#5

George, your line isn’t muted anymore. Please go ahead and ask your question.

Joseph George

analyst
#6

Hi there, can everyone hear me?

Operator

operator
#7

If you have a question, you can join STAR and press 1.

Joseph George

analyst
#8

Hello there.

Operator

operator
#9

We’ve got a question from Mr. Joseph George at IIFL Cap. Please go ahead.

Joseph George

analyst
#10

Can everyone hear me now?

Srinivasan Ravi

executive
#11

All right. I believe he isn’t able to make it. In that case, it seems then…

Operator

operator
#12

At this point, if anyone has questions, you can enter Star and one. We have a question from Pritesh Cheddar from Lucky on the line. Please go ahead.

Pritesh Chheda

analyst
#13

Yes, sir. Could you give us some detail on the expansion side of that alloy wheels project we had?

Srinivasan Ravi

executive
#14

Yeah. If you look at the alloy wheel exit rate for March, volume-wise it comes to roughly 3 million alloy wheels. That's the exit rate for the month of March. So we can't say we've been ramping up in steps at Biwadi as well as at Sholaqiri. So we've done a volume at a run rate equal to close to 3 million wheels for the month of March. For the analyst, I would say.

Pritesh Chheda

analyst
#15

And that project was supposed to kick off in Q4, correct?

Srinivasan Ravi

executive
#16

For Shul, that's Q4 or Q3. Viadi, though, is in operations. Phase one has been running for the entire year.

Pritesh Chheda

analyst
#17

And what about the one in Hosur?

Srinivasan Ravi

executive
#18

One that we kicked off in Q3 is still ramping up. Yeah, both of the plants are continuing to ramp up. The exit run rate has been to the tune of the annualized March number. When we analyze it, that equals around 3 million.

Pritesh Chheda

analyst
#19

All right. Turning to the aluminum die casting portion of the business — you know, with the Sunbeam acquisition, where do we stand when it comes to capturing margins through the shift, and how is that progress going?

Srinivasan Ravi

executive
#20

On the margin front, we're behind. For a number of reasons, we're still in the single digits. But we're on the right path in that we're exiting customers where there's no profitability. Within existing subsegments of the business, with the same customers, where it isn't profitable at all—or even selling off one portion of the low-value business, roughly 30 crore for a year—we've sold that equipment line and business, which we had disclosed to the stock exchange. So the customers who are leaving also need some time to find other suppliers. These are unprofitable businesses and not viable going forward. So the restructuring is underway. So we're on the right track. So starting in Q2 of the current year, we will see some traction. The cut in manpower, the cut in products, the cut in customers, and revisiting everything, and also resetting prices that are legacy prices, legacy products, and also on the aluminium price reset or the aluminum price pass-through—we've been very clear with customers that where there is no aluminum price pass-through, we are declining to supply. So all of this is in action as far as Sunbeam is concerned.

Srinivasan Ravi

executive
#21

It's not just at Sunbeam — at the other aluminium plants too, it's somewhat common. So we'll see those results showing up in Q2 from Sunbeam.

Pritesh Chheda

analyst
#22

All right, and for my final question, on the overall growth rate — how should we be thinking about FY27 on the revenue growth side?

Srinivasan Ravi

executive
#23

Like I said the previous time, we provided guidance for the first time, given all the shifts happening in the business, with so many plants being added and subsidiaries too. So let me give you a broad sense of it. It's definitely double digit. I'd say most likely in the mid teens — that's the expectation for growth. And when we say mid teens, we also need to assume aluminium prices stay around where they are right now. Should aluminium prices move, there could be a commodity price effect that either inflates or deflates the top line. So I'd say we remain on the growth path — that's very clear. New projects are kicking in across every division, I'd say, whether powertrain or aluminium or, I mean, the industrial engineering segment as well. So the growth momentum is reasonably — we're well placed, I'd say.

Pritesh Chheda

analyst
#24

Alright, thank you, sir.

Operator

operator
#25

Thanks. We’ll take the next question from Vignesh at Kesma Wealth. Your line is open—please go ahead.

Vignesh Sbk

analyst
#26

Hello, can everyone hear me?

Operator

operator
#27

Yes, sir. Go right ahead.

Vignesh Sbk

analyst
#28

So I’d just like to get a sense of whether you have any plans to scale up any specific segment, or over a medium-term horizon across the next 3 to 4 years, aside from the powertrain segment?

Srinivasan Ravi

executive
#29

Powertrain is also ramping up, and on the stationary engine side, the first hundred million of the order book is finalized and in hand. So, as I said earlier, as I said earlier, I'd expect us to get to roughly 100 million in revenue in 2930. So that's on track. In phase two, the inquiry momentum on order intake is quite strong. So we might also pursue a phase two expansion there, for revenue beyond that 100 million. You know the data center market, or EA, is shifting across the globe, and after the Iran crisis there's more emphasis on the Pacific region when it comes to installing data centers. That gives manufacturing in India somewhat more of an edge, because in terms of capacity, just about everyone is full. That's another favorable factor. Turning to general powertrain, the other projects—multinational companies establishing plants here and ramping them up—are also progressing. We're seeing the domestic business farm sector perform better. The truck segment is a bit muted, I'd say, overall. Then there's the other business of exporting some truck engine blocks outside India, which we said would be discontinued, but that is going to continue.

Srinivasan Ravi

executive
#30

Here's some positive news. On the powertrain front, things are steady and expanding. A double digit growth rate is what we can look forward to, I think. When it comes to aluminium, we cover everything from two wheelers to four wheelers, and industrial aluminium as well. A certain portion exists there. So honestly, our focus is on value added products such as casting and machining. Doing just the casting portion alone really isn't something we're interested in, and wherever we do a little of it, I think we're in negotiation with the customer. Either we convert it to include Machining, or new customers with higher value addition have to be found. That's because aluminium per se — commodity prices are rising, energy prices are rising, labor costs are rising, and all consumables are rising too. So margins on basic raw casting are not going to be viable. And with Craftsman, that business model isn't something we have. 95% is missioned and in Dr. Yes, it is critical casting. So for some basic machining it is still okay. But for Sunbeam it is not okay, since the parts are not so complicated. But at the same time, in most cases machining is not. Not most cases. At least the domestic portion machining is not there.

Srinivasan Ravi

executive
#31

As a result, some difficult choices will need to be made in the quarters ahead regarding enhancing value addition. To address your question, which customer it is doesn't really concern us. We're seeing rising inquiries for four-wheelers in the export market, in both Europe and North America, and we're growing there. Beyond that, an increasing inquiry trend is at least present. This indicates that the potential for expansion in the export segment is fairly high. So when selecting business that is viable and sustainable over a longer period, we are selective. And regarding our stated ambition for the aluminum business last year, I believe I mentioned a couple of times at least on the earnings call that the first leg, or first phase, will be reaching $1 billion in the aluminium business. And to that end, we are also stepping up our focus by merging the entities within the business model, about which you have also made disclosures to the stock exchange. Thus the aluminium business is on a growth track in industrial engineering; yes, it is a smaller portion of the business, but it is also the backbone for our powertrain and aluminium business. There too, we anticipate good traction going forward.

Vignesh Sbk

analyst
#32

That's useful, thank you for the thorough response. I have just one question regarding the second step of the powertrain segment: when do we intend to begin and commission under revenue for phase two?

Srinivasan Ravi

executive
#33

I believe we ought to make that addition by September, going by the order inflow. As for the orders — what we've already committed to accept, have accepted, or have received — I'd say they fill up phase one capacity on both the foundry side and the missioning side. On the foundry side it's modular, and moving to the next phase needs only incremental investments. On the missioning side, it may not be purely incremental — it's a bit more than incremental. So we're getting ready for that now. And the lead times are rather long. One good thing is that we began investing right from 21 onward, in small steps. In 23 and 24 we made disclosures, and even in 24 there was a public disclosure about this business. So I think this gestation period is fairly long. That's why our foundation in this business is pretty strong, and we're able to capture the orders, or the growth, that's coming in a hurry now. So even with the next set of orders, we'll be able to make a step-up incremental investment, since all the building blocks are in place to scale up.

Srinivasan Ravi

executive
#34

But every decision will basically be made after we revisit or examine the order portion in September.

Vignesh Sbk

analyst
#35

Alright, thank you. That’s all.

Srinivasan Ravi

executive
#36

Alright,

Operator

operator
#37

Thanks. Attendees, should you have a question right now, you can key in STAR and then 1 on your phones. Our following question comes from Senthil Kumar at Jointhra Capital. Your line is open.

Senthilkumar N

analyst
#38

Appreciate the chance to speak. Sir, can you hear me okay?

Srinivasan Ravi

executive
#39

Can you hear me now? Yes, go ahead, please.

Senthilkumar N

analyst
#40

I'd just like to ask whether there's any new business opening up for our industrial engineering racks in the data center space. Business

Srinivasan Ravi

executive
#41

When it comes to data centers specifically? Yes, that possibility exists, though it would lean more toward the aluminum side, for particular reasons. I realize that application also involves some extrusions and similar components. That said, up to now we have provided racks to the manufacturing segment — specifically automotive, where batteries are kept, since safety and fireproofing are critical there. We have built and delivered ESR systems and vertical lift modules for these divisions. As for the scale our Asian neighbor has achieved, I believe they are using a great deal of storage there, whereas for us — there is considerable discussion underway regarding 2 projects that are coming in for battery manufacturing. Yes, something could materialize. It might be awarded to multinationals. But I think an opportunity does exist, though it would not match the scale of what has taken place in our neighboring country, China.

Senthilkumar N

analyst
#42

Appreciate it. That covers everything on my end.

Operator

operator
#43

Thanks. Anyone who wants to ask something can key in STAR and then one on their handset. Joseph George from IIFL is on the next line. Go right ahead.

Joseph George

analyst
#44

Thanks. Can you hear me now?

Operator

operator
#45

Yes, sir.

Joseph George

analyst
#46

Great. So I have a couple of questions, sir. First, regarding margins in the powertrain segment: we saw a nice spike this quarter. Is that due to scale benefits, and will it hold up on that front? You said overheads, labor and so on are rising, and this question applies across all the segments. How easy will it be to pass along all those overheads, energy costs, perhaps labor, etc., to customers in the current context?

Srinivasan Ravi

executive
#47

Regarding the powertrain segment, I believe our growth there was only modest during the past year. The scale benefit we hoped for hasn't truly materialized over that period. What I'd point to is the repair and maintenance work that continued for roughly 4.5 quarters and was weighing down EBIT margins — that was the primary factor behind the change in EBITDA margins. Additionally, whatever manpower reductions came through automation or process methods have paid off overall. I'd also note that new products at newer price points, some of which have entered production, have helped balance out the legacy pricing. So scale in powertrain still hasn't built up the way we anticipated. It's therefore likely to deliver a meaningful advantage in the years ahead. I'd like to draw attention to one thing here: the amount of capex that has gone into powertrain and, later, into aluminium as well. Replicating the powertrain CAPEX is very difficult given today's cost environment. You mentioned operating cost — now I'll address capital costs. Capital cost. Part of it is real estate, such as land and buildings, and everyone knows how much those have risen.

Srinivasan Ravi

executive
#48

However, I’d add that equipment that used to cost around $100,000 might now run 110 or 115 over the past 20 years, with improved capabilities. Perhaps those improved capabilities or greater productivity could have helped offset the higher cost in dollar terms, maybe from $100,000 to perhaps $110,000 or $120,000. What’s toughest, though, is the dollar. Over a stretch of nearly 15 to 2 years, it has roughly doubled. In 20 years, it has roughly doubled. Correct? That’s fully the case here. So for anyone coming into this business, the CAPEX cost is extremely, extremely, extremely large. Absolutely. Here we’re drawing on a mix of manufacturing our own equipment for special-purpose missions, and very, very prudently we are modifying requirements so we remain competitive and win more orders. New orders are arriving at new prices. There are legacy matters we must tackle across all consumables, such as power and the petroleum-based cutting oil. The tools, which are carbide-based and imported from China, have risen several times over in the recent period. And naturally, labor — labor cost — is where the journey starts.

Srinivasan Ravi

executive
#49

I'd say that's the way it's going to be. On contract labor, we're below a dollar. Sure, we don't use much contract labor, but it comes in under a dollar per hour. Over the coming years, this is set to improve substantially — double or triple. So here's what we've done: for many years now, we've never reduced capex. You can see that in how very, very high our depreciation is. That helps us offset part of the labor cost increases, and honestly the labor code isn't hitting us meaningfully overall — and even more so, the equipment we've put money into over the last few years needs less and less labor as we go forward, and we can afford to keep quality labor. I'd say, in a sense, turning to the aluminium commodity price for the aluminium business and across all plants as well — on power and fuel, power and fuel specifically matters more for the aluminium business. The legacy products from at least one of the acquisitions we made recently are suffering very badly, because of the 15 year old, 10 year old legacy products and some of the miniscule customers.

Srinivasan Ravi

executive
#50

The tiny accounts we're stepping away from, plus the older items where we're either changing the pricing or exiting them, or moving that capacity over to other profitable accounts — that's already underway, and that's how we should be thinking about it. Because if a component cost a certain amount 10 years ago, its price in relation to gross margin can't stay where it was given today's pricing environment. So yes, I'd call it a reset of prices rather than a price increase, because a price increase implies a small percentage. But on gross — I mean on the value-added portion — it has to be a reset.

Joseph George

analyst
#51

Got it, sir. The second thing I wanted to cover is cash flow. Looking at your cash flow statement for FY25, there's a working capital hit of roughly 400 crores, negative. Then in FY26 there's another 600 crores. So I'd like to understand how we should think about that. Is it due to a one-time cut in payables that will reverse over the next few years, or is this the level where working capital days will, you know, remain going forward?

Srinivasan Ravi

executive
#52

I believe the plants that are—let's say the aluminum business had been ramping up over the last few years. Previously it was mostly driven by powertrain. So that means all at once there was a spike in working capital requirements, and now rationalization has taken place. I think the payment cycles have also settled in. So I think it goes the same way going forward. I don't think there's any major change.

Joseph George

analyst
#53

Okay, so the last item was about capex. What are you expecting for capex in CFY 2728, and because of that, how would you know the debt reduction, et cetera?

Srinivasan Ravi

executive
#54

Regarding FY27 specifically, we don't have much clarity on capex at this point, since we've taken care of some interim requirements. But in September we need to make a decision on CapEx for FY27 as well. FY28 hinges on how FY27 performs. So we're watching net debt to EBITDA on an ongoing basis as the monitor to get it down. That's the way we see it right now — we're more focused on the absolute payout on cash flow for manpower-related costs. It could be workers, it could be staff, it could be anything tied to outside services too, because this is inflationary in nature. So we don't mind some investment to offset that higher cost.

Joseph George

analyst
#55

So should we basically think about CapEx along the lines of last year — 1100 crores for this year? I know you said it has to be reset in September, but as things stand right now, is that a reasonable figure to work with?

Srinivasan Ravi

executive
#56

Look, when we talk about it, the dollar has reached 95. We can't know if the dollar will move somewhere else. We can't know whether we'll get projects with medium gestation or quick product projects. I'd say that when a project is quick, the CAPEX hits us right away. If not, it might get postponed by a year or two. So going forward, we'll take it in steps. As I said, net debt to EBITDA will keep starting to fall because the heavyweight lifting has been done, so in proportion to the gross block. If you look at it today, the gross block is also a bit deceptive, because the bulk of the investment was made many years ago, and that was done at a lower CAPEX cost. Today, when Dr. Action wanted to go for another plant, just for the greenfield land acquisition itself — on public disclosure, you know it's in the region of around 150 crores. Around 150 crores. Just the land adjacent to the SIPCOT area — we paid less than the Sipcort area. But it's the CAPEX that's required. And with current civil construction, when you look at it, it's high.

Srinivasan Ravi

executive
#57

The expense of operating or expanding is disproportionately heavy in this area. Even with that, our ROCE on a consolidated basis has come in at 16%. So we can keep an eye on net debt to EBITDA and ROCE instead, more than on the debt portion. And as craftsmen, we focus more on the outflow toward manpower costs, which I think is the forest that is causing sleepless nights, not the dead portion.

Joseph George

analyst
#58

Got it, sir. Thank you. And thank you for all the replies.

Srinivasan Ravi

executive
#59

Thank you.

Operator

operator
#60

Appreciate you all joining. Should any questions come up right now, you can press Star and then one on your touchstone phone. Up next we have Vinay Nandkarni calling in from Hathaway Investments. The floor is yours.

Vinay Nadkarni

analyst
#61

Thanks for the chance to ask. I have a couple of things I wanted to find out. First, regarding capacity utilization: could you shed some light on powertrain, then aluminium? Across all 3 of those units, at what capacity are they currently being utilized?

Srinivasan Ravi

executive
#62

On powertrain, we’re still around 60% to 70%, since certain pockets and segments have customers who aren’t performing well. But I think 85% will be the upper limit. That means we have roughly 20% to 25% headroom. The market does well there. We’re also adding a bit of capacity on the conventional powertrain. In the new powertrain business of the large engines, we’re still not seeing any revenue. Only samples are going out, and some pilot lots are being invoiced. But as of now, it’s not even 0.5% of our powertrain revenue. Even in the current year, we don’t expect that we’ll be anywhere—a meaningful single digit will be a very low single digit number. So next year it may reach a high single digit number. I think part of the powertrain of the large engine projects in FY29, FY29–FY30, will be seeing good traction in that segment. So there, capacity utilization is practically at the 10% level, because all the lines, samples, and prototypes are still going on. There is no revenue per se. So overall, if you take that new powertrain business also into consideration, our capacity utilization is around 60%—aluminium on the alloy wheel.

Srinivasan Ravi

executive
#63

As I believe I just said, our exit rate was near 3 million annualized as of March, while capacity stands at roughly 5.5 million. I think we ought to hit close to 4 million over the next year. That works out to about 70% to 80% utilization across the plants. So as for the next expansion step there — phase two, as we called it — we aren't really pressing hard on it. You want to wait and watch on this matter. We're watching commodity prices and the pass-through on aluminum pricing. It has to happen, and we need a lot of cooperation and support from the customer to do that. There should be no lead lag there, since that would hurt us badly. The second thing is imports of this alloy wheel. What's the way forward? Is some competition going to come back there again now that the BAS norms have more or less settled down? So we have to wait and watch. But current capacity is more or less sold. We don't have any major issue on that matter. Whether to expand further, which would give better operating leverage, is a question.

Srinivasan Ravi

executive
#64

We need to add capacity after this financial year ends. I don't believe we'll bring on more capacity during this financial year to push Ally's capacity even further.

Vinay Nadkarni

analyst
#65

And what about Sunbeam and Dr. Axion — are those two part of this?

Srinivasan Ravi

executive
#66

No, alloy bill isn’t something that Sunbeam or Dr. Axiom handles.

Vinay Nadkarni

analyst
#67

What capacities do they have?

Srinivasan Ravi

executive
#68

Sunbeam represents a fresh approach in which we're reducing capacity, shrinking the customer base, and trimming the product lines. I believe that was my opening remark—that we are exiting certain customers. We're in the process of selling some of the lines for which there has already been public disclosure, and even with the same customers we're exiting sub-products. So capacity utilization, currently near 70%, will drop to roughly 40 to 50% in the near term for Sunbeam, since a number of those items are legacy products that aren't viable to keep manufacturing. That's one point. Following that, costs will also decline, operating costs will decline, and there's no impact—in fact margins will improve once we carry out that activity, and the capacity will be used for new customers and new products in that way. So that's a fresh approach that is a work in progress on Dr. Axion. I believe we're running at a sensible capacity that is beyond this capacity. We truly can't stretch ourselves further, because we're a very critical component supplier to the four-wheeler manufacturing customers of ours. We've gotten additional orders with the same customer base, and more Indian OEMs have also placed orders with us recently.

Srinivasan Ravi

executive
#69

We're therefore adding to that capacity. Their utilization rate, I'd estimate, sits at roughly 80% to 85%, and past that point it becomes seasonal again. That's the ceiling for us. Investments are underway at TR, and on the Craftsman side utilization is also at a sensible 75% to 80% level. Still, our incoming orders are quite robust, so we're adding capacity. At Sunbeam, as I noted, we're cutting capacity, but that capacity gets reallocated within the mix. That's among the drivers behind our restructuring, if you've noticed. We have, yes. The goal is that, using a single vendor code or the same customer base, we can run those capacities.

Vinay Nadkarni

analyst
#70

The other item I was hoping to ask about is the arrangement you've entered into with Suprakash developers and Sikara Technologies for your Sri Parambudur project — what exactly is that deal?

Srinivasan Ravi

executive
#71

That is a doctor action. We were unable to secure the land from SIPCOT on schedule, which is the equivalent of MIDC in Maharashtra. So the parcel we were after was 50 acres, and we could not obtain that. What we got were bits and pieces of acres, and new sites that had still not been allocated. So the project would have been delayed by two years. The customer was placing orders on a time-owned basis. So next to the Sipcot land, at a lower price — which I mentioned earlier on this same earnings call — we took a land parcel 15% to 20% smaller, which had been assembled by some property developers, perhaps by buying from 150 individual land users. And we have taken over, as a vehicle, the investment in those two companies. So we have acquired roughly 50 acres of land at a cost of about 150 crore. We have taken over those companies. Those are the subsidies.

Vinay Nadkarni

analyst
#72

And that's going to be developed by—when is that expected to be commissioned? Since it's a greenfield project, correct?

Srinivasan Ravi

executive
#73

Work on the greenfield project has already begun. Civil construction is underway, and commissioning of the plant is set for December. So it will be operating next year, and all of this will be merged when we work through the scheme of things, whatever we have filed. As a result, once that happens, there will be no subsidiary.

Vinay Nadkarni

analyst
#74

Yeah, one final question, if that’s all right. Has there been any update on the Sunbeam land sale?

Srinivasan Ravi

executive
#75

We've now listed it for sale. Prices have risen. The government has taken some steps toward widening the road, and we're road facing. So we've observed that the property price is climbing sharply. Still, I think the sale is a bit elusive, because anyone looking to buy it wants a discount off the current market price. The current market price has been reset by at least 15% over the last one year on the matter. So it should get sold. It's only a matter of time, if you are able, initial price, whatever. If you wanted to sell at that price. There are too many buyers, I would say. But we aren't willing to sell at the price.

Vinay Nadkarni

analyst
#76

Yes. Thanks. Appreciate it, and all the best to you. Those are really strong figures.

Srinivasan Ravi

executive
#77

Thanks.

Operator

operator
#78

Thanks. Our following question comes from Vignesh at Ksema Wealth. Your line is open.

Vignesh Sbk

analyst
#79

Appreciate the chance to ask. I just want to follow up on the manpower matter — the rationalization or rule-cutting effort we've been concentrating on. Could you shed some light on that? What's our plan for carrying it out?

Srinivasan Ravi

executive
#80

It comes down to running things better overall, and running things better also covers improved equipment, improved layouts, improved processes, plus a certain degree of ergonomics in how production is handled. Beyond that, there's some semi-automation and some automation wherever volumes justify it. So what this amounts to is that we're rebuilding production to reach a very high level of productivity.

Vignesh Sbk

analyst
#81

If you could give us any rough idea of the costs involved, or the sorts of benefits you'd expect this move to bring.

Srinivasan Ravi

executive
#82

I'm fairly certain that even after all of that, it's still going to be inflationary. Look, when manpower cost inflation is set to rise by 20% year on year, rather than the 5 or 10% that would be sufficient for us to achieve manpower savings—or, without adding headcount, to mostly offset the incremental manpower cost—well, there will definitely be incremental manpower cost. Otherwise, we'd be looking at a huge amount of incremental cost. And this isn't just about Craftsman or Craftsman Group alone. It's industry-wide. You can see it happening everywhere. Right now everyone is talking about a labor shortage, and it's not really a labor shortage. What it is, is the cost of labor going up, and labor not being willing to work at those particular prices. We've seen protests in the NCR region, across three states overall. Various reasons. I don't want to comment on that because it's very sensitive. What I would say is that a reset in the labor cost is coming, and all the governments are also working toward increasing the minimum wages, which has been done in some states very recently over the last few months.

Srinivasan Ravi

executive
#83

Also, the new labor code is now entering the picture, and minimum wages are going to be reset. That affects the bottom of the pyramid. We don't have too many people at the bottom of the pyramid, except at a quiet company like Sunbeam. Beyond that, manpower costs generally are going to rise. So this is more than—as I said, what worries us more is not the debt. As I said, what worries us is inflationary manpower cost, which is very difficult to pass on to the customer. That is where we are working.

Vignesh Sbk

analyst
#84

Thanks. And do you have any timeline for when the aluminum segment gets to $1 billion?

Srinivasan Ravi

executive
#85

My guess is that we're looking at 2 to 3 years. It's also somewhat sensitive to aluminum prices. Still, I'd say with where aluminum prices sit right now, I think in 2 to 3 years we ought to.

Vignesh Sbk

analyst
#86

Thanks.

Operator

operator
#87

Thanks. Our next question comes from Ram Sheshan at Avendus Park. You have the floor.

Ramakrishnan Seshan

analyst
#88

Good evening, sir, and thanks for taking my question. I mainly want to ask about the choice to consolidate the aluminum entities — Sunbeam. Dr. Axion, would you take us through the thinking behind that strategy? What steps will you actually be taking in practice to get more value out of this combined entity? That is what I would like to understand.

Srinivasan Ravi

executive
#89

We examine what we’ve disclosed publicly. We also said that not only Sunbeam on the Doctor—we also examined our aluminum business of Craftsman, and how we can achieve better leverage or better synergy across all the aluminium businesses. That is our goal. So the easy one was how to do it with the Doctor and Sunbeam, but it is also tied to the Craftsman aluminium business. The way to look at it is that, for example, we will be around 6,500 crore in the aluminium business in Fi27 or so. Just an approximation. I don’t want to give any guidance. Please, I will negate that if it is taken as guidance. What I am trying to say is that some equipment, some people, some processes may be written in there. We may have a customer base. So it is difficult to do marketing with these small small sub-segments in the business. And our competitors across the world are 3 billion to 6 billion dollar interest. These are the customers. Some of them are already present in India wanting to expand their footprint. So when we go with each of the businesses at 200 million 100 million dollar revenue or $300 million revenue and try to take an order for 100 million 200 million, it is to share the resources and to grow the business.

Srinivasan Ravi

executive
#90

This is getting hard to manage. It costs a lot. That’s why we’re rationalizing the—sorry. Looking at the synergy and trying to combine these companies’ businesses.

Ramakrishnan Seshan

analyst
#91

Got it. So this won't only leave us well positioned to win additional business, it will also make operations more efficient. That means benefits on both sides.

Srinivasan Ravi

executive
#92

Right. So Craftsman has no aluminum plant in Chennai. Yet every one of our competitors from the north and west runs aluminum component manufacturing similar to Craftsman. There are a fair number of them. A few are publicly listed as well. Each one of those has a footprint in the Chennai area. Craftsman itself, though, has nothing there. Right now we're in Coimatore, Bangalore, and Uzur. So the plan is to build a separate campus for it and fold in Craftsman's aluminium business, which is mostly high pressure die casting. And then Dr. Plant is at capacity, so expansion is needed. Dr. Action. And once we put up a plant there for the doctor Action, adding yet another plant for Craftsman wouldn't make sense. So going forward it's better if we consider sharing. That's the thinking behind it. But step one concerns, very clearly, the Craftsman — sorry, Deer and Sunbeam subsidiaries.

Ramakrishnan Seshan

analyst
#93

Absolutely, sir. Thank you. I appreciate you taking the time.

Operator

operator
#94

Thanks. Our next question comes from Karthi at Suyash Advisors. Go ahead.

Karthi Keyan

analyst
#95

Good afternoon, sir. I hope you can hear me clearly.

Srinivasan Ravi

executive
#96

Yes, sir.

Operator

operator
#97

Yes, sir.

Karthi Keyan

analyst
#98

Turning to the leverage question. Philosophically, I get that leverage is on your mind. Yet viewed from the outside, 3,300 crore looks somewhat elevated. So, two questions. First, are you considering consolidation of the aluminium business as a route to deleveraging, or do you think other avenues exist for cutting debt? Some specific guidance there would be useful.

Srinivasan Ravi

executive
#99

It'll be more toward funding our future investments. Possibly. But regarding that debt portion, when we consider debt to EBITDA, we're looking at forward-looking EBITDA. I think we're already sitting at 2.43 net debt to EBITDA. So going forward, I'd say it'll be under 2 during the current year itself, entirely. And after that it will decline further to 1.5. So that's a natural trajectory for the debt to EBITDA. The way to view it is that if you don't grow the business at the current level — and at that level, I think the debt may be lower, but I think EBITDA margins will begin trending downward. I'd say that's with the new growth, the new products. The land sale, the sale of Gurgaon. If you take away the Gurgaon land sale, then look at the debt, we should look at debt at, say, 2700 on a consolidated basis, not at 3000.

Karthi Keyan

analyst
#100

That definitely helps, and I really appreciate it.

Operator

operator
#101

Thank you. Anyone who would like to ask a question can go ahead and enter STAR and 1. Shipam Batra from Ambit amc has a question for us. Please go ahead.

Shubham Bhatra

analyst
#102

Hello sir, thank you for taking my question. I apologize if this is an academic question, but could you give me a broad idea of what margins Clock and Dr. Action and Sunbeam will have in FY20 for the full year?

Srinivasan Ravi

executive
#103

My sense is that this will show up in the segment-level results. I think, on a standalone basis, we're in roughly that same band. I'd describe it as a somewhat different business. Where aluminium is concerned, we've already provided the results by segment. There's simply no profitability there — if you examine it at the EBITDA level, it may exist at Sunbeam, but profitability isn't present. So you can simply look at that figure between Dr. And every bit of the EBITDA comes from these 2 companies, Craftsman and Dr.

Shubham Bhatra

analyst
#104

Understood, understood, sir. Second question, sir: as our — and I will be — is ramping up, what kind of revenues are we talking about there?

Srinivasan Ravi

executive
#105

Sir, that question has already been addressed by me. Regarding the alloy wheel, I believe the present run rate stands at roughly 3 million. Coming out of that, if you look at it revenue-wise, last year it wasn't that much—around 240 crores. I think so, 280 crores. Is it? So the alloy revenue for the last financial year was approximately 280 crores.

Shubham Bhatra

analyst
#106

Understood, sir. And margins would land somewhere in the low single digit debit margins.

Srinivasan Ravi

executive
#107

At the Vivadi facility, that figure should land at the top of the single-digit range, or possibly reach double digits. At Ozur, though, it will stay in single digits, since that site is still ramping up. Utilization there isn't high.

Shubham Bhatra

analyst
#108

That’s everything. Thank you.

Operator

operator
#109

Thanks. We have a follow-up from Vinay Nkarni with Hathway Investments. Go right ahead.

Vinay Nadkarni

analyst
#110

Yeah, thanks. Thanks for the chance to speak. Again, when I look at EBIT for the aluminum business, we're at roughly 10.3, which matched last year. With the corrections we're trying to make this year, consolidation and so on, would you expect at least a couple of percentage points of growth there?

Srinivasan Ravi

executive
#111

Look at the aluminum business — a significant amount of capex was done last year. If we hadn't stopped CapEx during the second half of the year, I think margins would have improved. None of that capex has been put to use at all. So what's restarting the margin expansion is the new CapEx that's working — it's under commissioning or has just begun production, which isn't yielding the full quarter's revenue, and certainly not the full year's revenue on the matter. So once the base becomes higher on the installed capacity and then marginal investments are being made, that might not affect the depression in margins, but I think that's one of the reasons you see that it isn't an apple-to-apple comparison.

Vinay Nadkarni

analyst
#112

Yeah, but could you — I mean, should we be looking at something like a 100 to 200bps increase on this margin over the next year?

Srinivasan Ravi

executive
#113

At this pace? No.

Vinay Nadkarni

analyst
#114

Alright.

Srinivasan Ravi

executive
#115

The reason is that the capex we'll spend going forward this year is once again going to hurt our margins, no matter what improvements we achieve on the installed capacity.

Vinay Nadkarni

analyst
#116

Perhaps in another 2 or 3 years, it might turn out considerably better.

Srinivasan Ravi

executive
#117

Yeah. So if the base is 100 and we grow by 5%, margins will get better. But if the base is 100 and we're growing at 30 and the outcome comes out as 110 on the practical results, since the other things still aren't utilized — it's sort of 20% growth in capacity but 5% growth in revenue. So it isn't. It is.

Vinay Nadkarni

analyst
#118

So the years ahead are going to be far, far stronger.

Srinivasan Ravi

executive
#119

My view is that once we cross the billion mark, and after that we reduce capex so it represents a lesser share of installed capacity, margins ought to get better — assuming the right products come in at the right prices. Yes.

Vinay Nadkarni

analyst
#120

Thanks. I really appreciate it.

Operator

operator
#121

Appreciate it, everyone. That wraps up the Q&A. At this point I'll turn the call back over to Mr. Srinivasan Ravi for some closing remarks.

Srinivasan Ravi

executive
#122

Thanks to everyone for joining, and thanks for the confidence in the investments made. I believe that having made the investments a little earlier and having done the borrowing earlier is the better choice, because over the next few years the CapEx — the same CapEx carried out in this financial year — will be 1.5 times more owing to the increase in Capex cost. So that is one of the factors we have taken into account: to put up Capex a little earlier so that we become more competitive in the future. Thank you very much. And we'll sign off.

Operator

operator
#123

On behalf of Transman oft Automation Ltd., thanks to everyone. That brings this conference call to a close. We appreciate your participation. You're welcome to disconnect your lines at this point. Thank you.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Craftsman Automation Limited transcript — plus 131,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.

Get the API View API docs →

This call discussed

For developers and AI pipelines

Programmatic access to Craftsman Automation Limited earnings transcripts and 131,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Craftsman Automation Limited or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.