Cummins Inc. (CMI) Earnings Call Transcript & Summary

July 28, 2020

New York Stock Exchange US Industrials Machinery earnings 59 min

Earnings Call Speaker Segments

James Hopkins

executive
#1

Thanks. Morning, everyone, and thanks for joining today's call to go over Cummins' second-quarter 2020 results. With me here are Tom Linebarger, our Chairman and Chief Executive Officer; Mark Smith, our Chief Financial Officer; and Tony Satterthwaite, our President and Chief Operating Officer. At the end of the call, all of us will be on hand to take your questions. Before we get going, I want to flag that a portion of what you hear or receive today amounts to forward-looking statements as defined under the Securities Exchange Act of 1934. Those statements set out our forecasts, expectations, hopes, beliefs and intentions concerning future strategies. A number of risks and uncertainties could cause what actually happens down the road to differ materially from what such forward-looking statements project. You can find further details about those risks and uncertainties in the forward-looking disclosure statement included in the slide deck, as well as in our filings with the Securities and Exchange Commission — in particular, the Risk Factors section of our most recently filed annual report on Form 10-K, along with any quarterly reports on Form 10-Q filed after that. Throughout this call, we'll also touch on certain non-GAAP financial measures, and we point you to our website for the reconciliation of those measures to GAAP financial measures. Our press release, which includes a copy of the financial statements, plus a copy of today's webcast presentation, can be found on our website at www.cummins.com under the heading of Investors and Media; with that covered, we'll turn things over to our Chairman and CEO, Tom Linebarger.

N. Linebarger

executive
#2

Thanks, James, and good morning to everyone. I'll start with a few opening remarks about the conditions we're operating in, and after that I'll get into our results for the second quarter. Demand during this quarter swung around in ways our company had never seen; during April, more than 70% of the OEM sites we ship to went through complete shutdowns of their facilities. A lot of OEMs started reopening their facilities in May, though supply chain difficulties limited how much they could raise build rates. In June, production rates climbed even higher. These shutdowns and managed reopenings together produced the biggest revenue drop in the history of the company. Through a set of measures, among them restructuring done at the start of the year, temporary reductions in salary, and other cuts to discretionary spending, our company still managed to deliver reasonable profitability considering how large the sales decline was. A number of our cost-saving steps have meant sacrifices from our employees. Cutting headcount and reducing pay are the options we turn to last when managing expenses, because of how they affect our people. Although the steps taken this year were necessary, I want to use this moment to recognize and thank employees for what they are giving up to help the company get through this difficult period. Additionally, our team members have put in relentless effort to navigate the extraordinary interruptions to the supply chain caused by the COVID-19 pandemic. The most severe swings in demand that this company has ever experienced have been handled by our supply chain group, and they did so while also coping with the consequences of shutdowns at OEMs and suppliers, a large number of which arrived with minimal or no advance notice. On top of that difficulty, we have needed to rethink how we operate within our manufacturing and distribution sites — modifying floor plans and workforce schedules, and instituting health screenings — all with the goal of keeping our people safe and lowering the likelihood of transmission. Outside of the places where we make and distribute products, a large number of our engineers and office staff are still working remotely, some entirely and some for part of the week. This situation has created distinct difficulties of its own. For example, we have had to ensure engineers are able to work together and keep product development timetables on schedule, while our RT and shared service organizations rapidly introduced a worldwide rollout of new tools and network capacity. At the same time, we continue to manage our facilities and operations, and the safety of our people remains the top priority. These safety measures frequently make it more difficult for our employees to do their jobs efficiently, and nearly all of our people have needed to innovate and find new ways of handling tasks that used to be simple. I'll say it one more time: thank you. I also want to convey how thankful I am for how dedicated and nimble Cummins employees are worldwide. I'll now move into an overview of what we delivered in Q2, along with a look at our key end markets. After that, Mark will provide further specifics on our financial results for the second quarter and bring you up to date on our balance sheet and liquidity position. Second quarter 2020 sales totaled $3.9 billion, down 38% from the same quarter in 2019. EBITDA was $549 million, a margin of 14.3%, compared with $1.1 billion, or 17%, in last year's comparable period. Restructuring benefits, decreased variable compensation, temporary salary cuts, reduced warranty costs, and greater joint venture income helped partially counterbalance the effect of lower volumes. Record demand levels in China were the main driver behind the rise in joint venture income. In the second quarter, all 4 of our mature operating segments stayed solidly profitable, and only the New Power segment posted operating losses, since we keep investing in new products and technologies ahead of widespread market adoption. Revenues for the Engine business fell 47% in the second quarter relative to a year earlier. Reduced production across North America truck markets, together with softer demand from global construction customers, accounted for most of that revenue decrease. During this quarter, EBITDA margin came in at 10.5%, whereas in the comparable 2019 period it was 15.4%. Cost savings tied to restructuring efforts and reduced salaries, together with higher income from joint ventures, helped offset some of the impact from decreased volumes. Our Distribution segment saw sales decline 21% from the prior year, driven by softer revenues both domestically and abroad. In the second quarter, EBITDA was $160 million, equal to 10% of sales, compared with 8.5% in the same quarter of 2019. EBITDA margins got better as we continued to realize gains from transformation initiatives in North America, as well as from reduced variable compensation costs. Revenues in the Components segment declined 38% during the second quarter. In North America, our sales were down 55% as truck build rates came in lower. International market revenues declined 9% on softer truck demand in Europe and India. China revenues increased 63%, a new quarterly record for the Components group. Second-quarter EBITDA came to $141 million, or 12.3%, versus 16.1% a year earlier in the same quarter. The EBITDA percentage declined because lower volumes were partly offset by restructuring savings, temporary salary cuts, and lower warranty expenses. Power Systems sales for the second quarter were down 35% from a year ago. Industrial sales fell 33% amid ongoing softness in oil and gas and mining markets. Sales from power generation dropped 37%, as revenue weakened in North America along with international markets. EBITDA came in at 11.7% for the second quarter, versus 14.4% during the same period last year. As before, reduced volumes outweighed the gains from cost-cutting measures and a decrease in warranty expense. Over in the New Power business, EBITDA showed a $38 million loss for the second quarter, which matched what we had anticipated. I'll now walk through a few of our major markets, beginning with North America, before moving on to some of our biggest international markets. Revenue for North America during the second quarter declined 48%, landing at $2 billion. We saw weaker demand across all end markets, with OEM shutdowns affecting build rates of trucks and construction equipment. Shipments in power generation dropped as projects got pushed back, and our parts and service segment took a hit because end users put off vehicle maintenance. Heavy-duty truck production across the industry fell 71% in the second quarter versus the prior-year period, and 54% from the prior quarter. Our market share year-to-date stands at 33%, up from the second half of 2019, even with industry production down; this quarter we started shipping our X12 engine to freightliner for their Cascadia day and sleeper cab models. Bringing a lightweight X12 into the regional haul segment will strengthen the top position we already hold. Output of medium-duty trucks declined 61% during Q2. Our commanding share in medium-duty trucks remains intact, since Cummins powertrains drove more than 80% of new trucks in 2020. Shipments to North American pickup truck buyers overall dropped 71% compared with the prior year, as OEM shutdowns in Q2 took a toll. Within domestic off-highway segments, construction equipment engine sales slid 43% relative to the near-record figures posted a year earlier. Revenue from power generation equipment declined 38% because demand weakened in the RV and backup power sectors. Engine demand in oil and gas markets fell 88% as purchases of new fracking equipment were reduced.

N. Linebarger

executive
#3

In North America, our aftermarket sales dropped 25% versus a year earlier, hurt by weak truck utilization — particularly during April and May — along with industry destocking and customers pushing back scheduled maintenance. Let me now move on to our key international markets. International revenues were down 20 to 22% in Q2 2020 versus the same period last year. China's second-quarter revenues, joint ventures included, came to $1.9 billion — a 30% gain and a company record. This shows how flexible our supply chain teams are: our manufacturing facilities went from a complete shutdown in March to building a record quantity of engines, turbochargers and after treatment systems in April, then kept producing at those record levels through May and June. During the second quarter, industry demand for medium and heavy-duty trucks in China rose 61% from a year earlier. That record demand stemmed from purchases deferred out of the first quarter plus government policy that boosted scrapping of old NS3 trucks. Our market share reached 15%, up from the 13% — pardon me, up 13% — from the 13% recorded in Q2 2019, thanks to strong performance of our X12 engine among fleet customers. Fleet customers now make up 20% of the China market, and they keep shifting toward a total cost of ownership approach, with emphasis on fuel economy and reliability. We anticipate that trend will persist, creating chances to grow our market share as we roll out our NS VI products nationwide next year. Industry interest in automated manual transmissions has risen as well, and we currently expect to sell more than 1,000 Endurant AMTs in China before this year ends. Light-duty truck industry sales climbed 43% in the second quarter, and our market share came in at 8%, unchanged from last year; in cities where NS VI regulations already apply, we're seeing strong acceptance of our new engines, with market share exceeding our present 8% level. Second-quarter demand for excavators in China was up 63% from a year ago. The central government is promoting higher borrowing by local municipalities to fund infrastructure investment and housing projects, which has pushed excavator demand higher. Our market share was 17% versus 16% a year ago, driven by strong performance from our domestic OEM customers. Demand for power generation equipment in China was flat versus a year ago, with higher demand from data center customers offset by softer standby power demand. Second-quarter revenues in India, joint ventures included, were $106 million, down 77% from the second quarter a year ago. Industry truck sales in India fell 93%, while construction and power generation sales dropped by more than 75%, all mainly because of nationwide and regional shutdowns in response to COVID-19. The truck industry moved to BS VI standards on April 1, which will bring additional revenues for our components business. Also, Ashok Leyland is now a customer in our Emission Solutions division. In Q2, we wrapped up a deal with Mahindra — an Indian maker of trucks and tractors — to provide an on-highway 4-cylinder BS VI compliant engine, which reinforces our top spot in India's truck sector. Beyond India and China, revenue fell 29% in Europe and 59% in Latin America versus the prior year, largely because COVID-related OEM shutdowns cut truck output. Mining engine sales worldwide dropped 35% from 12 months earlier. Among copper and iron ore miners, demand held steady, with commodity prices up more than 30% from their April lows. Conversely, coal prices are still under $50 per metric ton, so coal miners need less equipment. Although demand stayed soft across most markets in Q2, we keep reinforcing ties with existing OEMs and bringing in new buyers for our offerings; we're striving to back our customers and collaborate in fresh ways through this tough stretch, positioning us to gain once markets bounce back and lifting our market share going forward. Even as we keep bolstering our standing in diesel and natural gas, we're also pursuing chances in our New Power segment. Across North America, 200 Cummins-powered battery electric buses are in operation, and later in 2021 we'll begin supplying electric powertrains to Kalmar for the terminal tractor market. We anticipate greater uptake of battery electric powertrains in bus and terminal tractor sectors over the coming years, followed by adoption in portions of the medium-duty truck market. Our wholly-owned Distribution business backs our products in the field, giving customers assurance about uptime as this technology gets used commercially for the first time. In Q2, 2 trains using Cummins fuel cells wrapped up an 18-month trial in Europe, covering more than 180,000 kilometers. Come 2022, 41 such trains powered by Cummins fuel cells will operate in Europe, positioning Cummins as the top global supplier of fuel cells for trains. We're actively discussing with OEMs and end users how to apply our PEM and solid oxide fuel cells across many uses, such as trains, ships, data centers and on-highway vehicles. To date, we have fuel cell-powered trucks operating in Europe and North America. Alongside the fuel cell opportunities, we hold a top-tier portfolio of alkaline and PEM electrolyzers, which will be essential infrastructure for the hydrogen economy. Our electrolyzers are already deployed in various applications today, such as on-site hydrogen production for fueling stations, industrial uses, and more recently in larger scale power to gas applications. In the latter half of 2020, we'll finish the world's biggest PEM hydrogen electrolysis plant with Air Liquide. The Becancour, Canada site, at 20 megawatts, will have the ability to turn out 3,000 tons of hydrogen each year. Thanks to a top-tier product lineup and operations spanning Europe, North America and China, our hydrogen unit is in a strong spot to expand as worldwide spending on fuel cells and hydrogen production rises. To go deeper into our expectations for growth in these markets and the way Cummins will take part in this fast-evolving sector, we'll host a Cummins Hydrogen Day for investors and analysts on the morning of November 16. We're hoping every one of you can join this virtual event. Even as we're enthusiastic about what lies ahead in advanced diesel, natural gas and the new power markets, difficult and unpredictable market conditions will persist through the second half of 2020. For the third quarter, we anticipate consolidated company revenues will be higher than second quarter levels across every region other than China, where we foresee decreases relative to the record levels seen in the second quarter. The speed of recovery will vary by region, however, and could shift depending on what governments do both to limit COVID-19's spread and/or to boost their economies and strengthen business and consumer confidence.

N. Linebarger

executive
#4

The people leading our company have a lot of practice steering things when demand gets shaky. We've got plans ready for multiple demand outcomes, and we recognize those outcomes could look different depending on the region and the end market as we get a clearer picture of COVID-19's full effects. Given that our markets still carry uncertainty, our attention in the back half of the year will stay on cost and cash flow management, even as we keep putting money into the products and technologies that fuel profitable growth for the company. Once demand comes back — and it will — Cummins will be well positioned to provide the products and services that make our customers successful and produce even better financial results. At this point, I'll hand things over to Mark.

Mark Smith

executive
#5

Thanks, Tom, and good morning to all of you. The COVID-19 pandemic struck the world economy in a way we had never seen before, and during the second quarter we experienced the consequences throughout our markets and across our worldwide operations. Softer demand from end users, along with closures at OEM customers, suppliers and certain of our own facilities, all played a part in producing the weakest quarterly sales figure for Cummins in 10 years and the biggest decline in revenues compared with the prior year in the history of the company. We still posted solid profitability in the second quarter, since the gains from restructuring efforts begun in the second half of 2019, together with further cost reduction steps implemented this year, helped safeguard profitability and cash flow amid a highly uncertain economic climate. Revenues in the second quarter came to $3.9 billion, down 38% versus a year earlier. North American sales fell 48%, while international revenues were down 22%. Currency fluctuations had a negative 2% effect on revenues. As Tom noted, China was the sole major market where our revenues rose compared with the prior year. Earnings before interest and tax, depreciation and amortization, or EBITDA, reached $549 million, or 14.3% of sales, for the quarter, versus $1.1 billion, or 17% of sales, a year ago. EBITDA fell by $500 million, mainly because of the adverse effect of softer sales, partly offset by reduced compensation expenses stemming from temporary salary cuts and lower variable compensation costs. Results also gained from the restructuring actions announced at the end of 2019 and record joint venture income in China. The temporary salary reduction took effect in the middle of April and lowered expenses by roughly $75 million in the second quarter, affecting the results of every one of our operating segments. Salaries will be completely restored at the start of the fourth quarter. Gross margin of $890 million, or 23.1% of sales, declined by $751 million, or 3.3% of sales. The adverse effect of weaker sales more than offset lower warranty expenses, reduced variable compensation and the gains from our restructuring and other cost-reduction initiatives. We cut our selling, administrative and research costs by $221 million, or 25% year-over-year, to $659 million. SG&A expenses were down $159 million thanks to the benefits of restructuring, lower compensation costs and reduced discretionary expenses. Research expenses fell by $62 million, mainly because of lower compensation and temporary salary reductions, and also less testing at our own and third-party facilities due to COVID-related shutdowns. We keep investing in new technologies and improving products that will deliver profitable growth in the future, and we do expect our engineering expenses to rise in subsequent quarters as testing activity picks up. Joint venture income grew by $19 million year-over-year, driven mainly by record demand for trucks in China. Joint venture earnings set a new quarterly record in China as those higher volumes were converted into strong earnings. Other income of $39 million was down $4 million, primarily because of lower interest rates, producing lower interest income on our cash and marketable securities holdings. For the quarter, net earnings came to $276 million, which works out to $1.86 per diluted share, versus $675 million, or $4.27 per diluted share, during the same period 12 months earlier. Our effective tax rate for the quarter stood at 25.7%, compared with 21.4% in the second quarter of 2019, and this quarter's expense figure reflected $14 million of unfavorable discrete tax items. Operating cash flow for the quarter showed an outflow of $22 million, against an inflow of $808 million in last year's second quarter. That drop in operating cash flow stemmed mainly from weaker earnings along with greater working capital. Inventories grew by $53 million during the quarter, largely at our manufacturing facilities, as a wave of global customer shutdowns beginning at the end of March sharply cut demand on our facilities with little advance notice. Inventories did come down during June as customer orders picked up. Capital expenditures totaled $77 million for the quarter, lower than the $133 million recorded a year ago. We distributed $193 million in cash dividends during the second quarter and bought back no shares. Cash, cash equivalents and marketable securities came to $2.1 billion by quarter's end, with total liquidity of $5.6 billion, helped along by a new $2 billion revolving credit facility added in early May. To sum up, COVID-19 hit our second quarter hard, bringing industry-wide production shutdowns and sharply weaker demand across most of our markets. We still posted solid profitability despite a record drop in quarterly sales, thanks to the incredible dedication and adaptability of our global employees as we scaled back global production in April, then flexed up through May and June, all while carrying out our cost reduction initiatives. The actions we've taken to safeguard profitability, conserve cash and strengthen our already solid liquidity position help ensure we can continue investing in new products that will drive future profitable growth, even amid this extraordinarily difficult economic environment. Although demand from OEMs has rebounded from April's historic lows across several markets, how quickly things recover after the third quarter is still unclear. Given that uncertainty, we won't offer specific forward-looking guidance for the rest of the year, though we hope a few brief remarks about the trajectory of costs and revenues will prove useful. We expect consolidated sales for the quarter to rise above second quarter levels, since many countries have relaxed the lockdowns put in place during March and April, letting OEMs raise build rates. Joint venture income should fall from second quarter levels as demand for trucks and construction equipment in China eases back from its record levels in the second quarter. As I mentioned, we do anticipate higher engineering expenses in the third quarter as testing activities move back closer to planned levels, and the temporary salary reduction, which stays in effect during the third quarter, will be fully resolved by the start of the fourth quarter. In closing, Cummins is still well placed to steer through these exceptionally tough conditions. Maintaining the company's financial strength, backing our customers, and setting the business up for a better future will keep requiring us to act as needed; at this point I'll hand things back to James.

James Hopkins

executive
#6

Appreciate that, Mark. <<operator_script>> Operator, at this point, we're set to take our opening question.

Andy Casey

analyst
#7

I have one quick question about near-term matters. Could you talk a bit about what's happening in China? Have you started to observe the drops you're anticipating for Q3, or is this mostly forward-looking?

Mark Smith

executive
#8

Andy, I'd say this — capital goods demand in China, as you're aware, tends to be weaker on a seasonal basis during the year's second half. We've just finished the first half coming off record levels, but I believe it's fair to expect some cooling as we head into the third quarter. There's a certain amount of visibility available, though it isn't complete.

Andy Casey

analyst
#9

All right. Next, a somewhat separate follow-up, and this one's about the longer term. When it comes to fuel cell technology, do trains and on-highway trucks need notably different things? In other words, how much can that scale across different uses, where you'd gain from possibly serving several markets rather than only concentrating on-highway?

N. Linebarger

executive
#10

Tom Linebarger: Andy, this is Tom Linebarger. Appreciate you being with us today, and appreciate the question. What I'd say is that scale opportunities do exist across applications, and differences do exist. We're an investor in stack technology, so yes, scale opportunities are definitely there; and beyond hydrogen costs for fuel, the main thing that drives fuel cells to be competitive, I'd say, is volume on the stack and related components. That volume delivers cost benefits and technical learning, even across different applications. With trains, one point is that their volume is, of course, far below that of trucks, yet they use far more fuel cells, or far more stacks. So in those trains we'll be delivering quite high volumes of fuel cells, which lets us shift to a more cost-effective manufacturing technology, plus other supporting components can be purchased more cheaply; so scale opportunities clearly exist, and there's also some work specific to each application that's needed in controls and other areas to make it function in that particular application.

Jerry Revich

analyst
#11

Tom, could you discuss the chance that exists with electrolyzers compared with fuel cells? It seems logical that the addressable market for electrolyzers might be much bigger. How much of a priority is that for all of you relative to fuel cells? Also, could you address whether you want to speed up spending on R&D in those areas, since regulatory support for hydrogen is building beyond what was discussed during the analyst day?

N. Linebarger

executive
#12

Appreciate that question, Jerry. Our thinking on electrolyzers — my thinking, and the company's — is changing, since we entered this space fairly recently. Initially, I believe we felt electrolyzers were necessary so that fueling would be guaranteed for the fuel cell uses we have. As you pointed out, we recognize now that a major chance exists to broaden that strategic perspective. Naturally, every dollar we put into electrolyzers adds to what Cummins already does. That means it gives us a sizable growth platform. We also possess certain experience, naturally, in power generation, where there is some similarity in project execution and in the engineering approach. That gives us some help. Then there are the incentives currently — in Europe particularly, though also in China and elsewhere around the globe — for making hydrogen, particularly green hydrogen, which calls for PEM electrolyzers, and among the few makers of those today, we are one. Those incentives are substantial, and they simply — as you observed, the Europeans were rolling them out, they are big and they are on offer right now. Therefore we are growing what we spend on R&D as well as on launching products, to ensure we have the proper sizes and range of electrolyzer technology on the market. We have a partnership too with Air Liquide, which plays a major role in the market, while also forming other alliances, such as — you likely noticed we completed this — we formed this joint venture together with NPROXX, a company in tank technology, enabling us to offer high-pressure tanks, which matters for storage and transportation within the hydrogen economy. So we keep adding technologies. We keep adding partners, ensuring we can take part more substantially in this market, because of the growth opportunity. And as you noted, now is the moment. So we are growing our footprint there.

Jerry Revich

analyst
#13

Tom, one quick clarification. Would you go along with the claim that the addressable market and opportunity for Cummins and electrolyzers is a lot bigger than what exists in fuel cell? I realize it's early, but could you address just that piece of the question, please?

N. Linebarger

executive
#14

Happy to, Jerry. Appreciate you circling back to it. Honestly, I truly don't know, since one piece of the difficulty is the breadth of electrolyzers we'll end up playing in. Beyond that, with fuel cells, it hinges on the share of the truck market they ultimately capture, things like that. Still, I would say — without a doubt, it's a broader space. Let's simply say we agree on that; it's a broader space; so if we play in all aspects of producing hydrogen, it would be bigger. There's no doubt, since we're able to serve everybody else's fuel cells too. That said, our view is that each one offers substantial opportunity, yet the electrolyzer chance comes ahead of the fuel cell truck chance. In other words, it arrives sooner; that's the reason we're chasing the electrolyzer chance harder, to bring more products to market faster.

Ann Duignan

analyst
#15

I would really like to continue discussing the hydrogen items, but perhaps I should pull back and inquire about Q3, could you — plus Q4. Could you estimate the expenses that are going to return to the system during Q3 and Q4? Provide us with any guidance regarding the dollar amount we ought to consider concerning variable comp, salary reductions, etc., etc., simply as we examine our models for the remaining portion of the year.

Mark Smith

executive
#16

Ann, this is Mark. I appreciate your question. Thus, the mix of temporary salary cuts and variable compensation from Q2 through Q3 ought to be relatively comparable in dollar terms regarding the impacts, so no major shift there. What will differ is mainly the top line, the reduced JV income, and a few rises in engineering expenses. The fourth quarter is when salary reductions are restored. And as I mentioned a moment ago, that amounts to $75 million in Q2 at a full quarter run rate, which will occur in Q3, roughly $90 million will return during the fourth quarter.

Ann Duignan

analyst
#17

All right. Thanks for those details; that helps. Stepping back for a moment, we discussed how poor the fundamentals were in India. Could you describe what you're observing in terms of the fundamentals compared with the temporary impact of COVID versus — I realize you mentioned truck sales dropped 70, what, more than 90%, but what are you observing more generally there in India?

Livingston Satterthwaite

executive
#18

Ann, it's Tony here. I'll take that question. Truck sales in India were extremely weak. As you know, part of this softness began before COVID. Even a year ago, the Indian truck market was not in good shape. COVID has worsened things; we're truly seeing very low economic activity in construction. Every one of our markets in India is down considerably; and naturally, COVID has turned out harder to handle than even in certain other nations. So we're fairly cautious regarding India and don't anticipate any meaningful rebound during the second half of this year, given that we see weak activity and the COVID challenge, if anything, growing in India.

Jamie Cook

analyst
#19

Solid quarter. For my first question, I want to revisit those near-term patterns. Could you walk us through how sales flowed across the quarter — April and May compared with June — and then tell us what July looks like? Are we exiting at a point where July resembles June's levels, or is that not the case? Then, Mark, my second one is directed at you. I understand a portion of these costs will return in Q4, yet your G&A discipline during the quarter was quite strong. Looking ahead, are there further chances to trim structural costs on top of the $250 million to $300 million range you laid out in November?

Livingston Satterthwaite

executive
#20

Mark, I'll handle the first, and you can take the second. Sure, Jamie — what really drove the second quarter was the shutdown at our OEMs. The key distinction between June and the April-May period came down to nearly all workers being present again in June, which meant production rates were leveling off. That pattern has carried into July fairly consistently. As a result, we don't anticipate much of a lift over June's rates as we move into the third quarter, though we do see them staying fairly firm; that supports what Mark mentioned — revenue growth ahead in the third quarter. A number of the ramp-ups happened quite quickly, and I'd like to reinforce what Tom said regarding how well our supply chain group matched our OEMs' pace in June; that stands out as one of the more notable elements of this situation — the ramp looked sharply V shaped for at least a month. We don't think it will continue climbing, but we do anticipate — and are already observing in the third quarter — fairly steady build rates across most of our OEMs.

Jamie Cook

analyst
#21

All right. Then, Mark, what about expenses?

Mark Smith

executive
#22

Yeah, so, Jamie, thank you. Much of our restructuring effort was directed toward SG&A. That's vital work for this business, though we felt there were chances to boost efficiency in that area. And honestly, those expenses came in somewhat beneath what we'd expected during the year, toward the lower end. That has provided some relief as things have unfolded, and staff have genuinely stepped up when it comes to holding costs down. We constantly seek additional ways to remove expense and ask what this stretch can teach us, so that when revenues bounce back, our operations don't simply restore every one of those costs. Without question, next year will bring higher compensation costs. With luck, we're facing — with luck, a different top-line picture, though it's premature to tell. Still, yes, we can — we will continue hunting for methods to control that SG&A as a percentage of sales once our revenues begin improving more steadily; we move into our planning. Cost management is ongoing for us, and next we enter our planning cycle for the coming year. Clearly, that's a major point of debate. Yet yes, we focused heavily on restructuring within SG&A early in the year, and it has made a big difference.

N. Linebarger

executive
#23

Jamie, Tom here. I just wanted to add something — perhaps give you a feel for how we're thinking about this. We took the permanent actions tied to the Q4 work, and the whole idea was that we were planning for a down year; we had a sales forecast for the year, and we set the cost base to match that structure. Then COVID comes along and pushes sales much lower, hopefully on a temporary basis; and honestly, at this point we simply don't know how much — where sales will settle between the bottom we reached and our original 2020 and 2021 projection. But as we gain a clearer picture of what 2021 is starting to look like, if our cost structure fits 2021, we'll keep evaluating moves and everything — because we're constantly working through it, and that's okay. If, though, we see revenue staying lower in 2021 and beyond, and that doesn't line up with where we targeted or SAR or SG&A at the end of last year, then another reduction will be necessary. So in Q4 what we'll try to do is bring the temporary ones back; and if the revenue trend looks right, if it seems we're returning to roughly where we expected to be, then we'll be close to that, and only relatively modest steps will be needed. If we're — if we believe we're in a prolonged lower period, then we'll need to do more than that; and we're ready for either case. In fact, back in May we began building scenarios for all those possibilities and asking ourselves what our strategic set of actions would be in each situation. And like Mark said, that work isn't finished, since we folded it into our planning work this fall. But we've already been examining it and asking what we'd do under every circumstance. So whatever revenue scenario we ultimately settle on for 2021, we'll be ready.

Steven Fisher

analyst
#24

With the improved revenues you reported for Q3 compared to Q2, it seems like you're still keeping costs steady in Q3. Is there any reason the decrementals wouldn't be even stronger than the Q2 level we observed?

Mark Smith

executive
#25

Well, Steve, I believe we've made the moves we — for the time being that we intend to, and the cost structure will stay pretty steady from one quarter to the next. And I think that's the best approach for modeling it. Naturally, we've gotten through the hardest comps during the first half of the year. It's really kind of up to the revenue trajectory at this point, since our cost actions are fixed for the upcoming quarter. So I think you can build your own models from there regarding the decrementals, keeping in mind a few of the remarks I've shared about sequential increases in engineering, sequential decreases in the joint venture income; we can't run things on a month-to-month basis when it comes to the decrementals. Clearly, we're happy with how we performed in the first half of the year. The actions we've taken into account have now set the direction for the remainder of the year. And truly, the revenue will be what drives the numbers going forward.

Steven Fisher

analyst
#26

So I suppose regarding that, Mark — or Tom, rather — when it comes to the uncertainties surrounding the guidance, I'm just wondering how far ahead you can actually see your backlog, since I would have imagined the backlog you're holding would be sufficient to give you confidence in offering at least some kind of range for the remainder of the year. And on top of that, I'm curious which of your end markets and geographies you believe you have the greatest relative certainty about for the rest of the year? And which ones strike you as the least certain?

N. Linebarger

executive
#27

Steve, this is Tom. We don't carry much backlog. The only area where we genuinely have backlog is power generation projects. And even in that case, I'd say those are quite short at this point. In the truck market, they do hold some backlogs, but naturally, they handle those backlogs by ramping production up and pulling production down. So in that situation, the way they adjust their output from one week to the next affects how much demand they place on us. Here's what we're observing, though — just to give you a feel for it. In North America, truck manufacturers are clearly settling their production rates; they're experiencing stronger demand. Not — it isn't amazing; it's simply stronger. It has just climbed back up to the June levels. And as Tony mentioned, it appears to be sort of flattening out there. They're feeling fairly positive about that. But no one is under any illusion that whether it stays there or drops hinges heavily on how sick everyone becomes. So if we keep seeing case counts climb in the U.S., and we're forced to keep reverting further and further toward economic shutdowns once more, then you ought to anticipate demand dropping off again. If the opposite occurs and conditions begin improving while COVID cases decline once more, we'd expect a gradual continued reopening and improvement. So the majority of us look at that and say, "We genuinely don't know how to predict that yet." And that — and if you took that same scenario we just described and ran it in India, in Western Europe, and in China, you'd get a somewhat different story or a completely different story, depending on the location. So I believe that's the reason we're staying cautious regarding demand trends. We are where we are in the sense that we're watching things settle and tick up slightly month-by-month in truck markets across Europe and the U.S. and so forth. And we — what worries us about China is that it was simply so hot for a quarter. We just can't figure out how it maintains that level through the remainder of the year. So we suspect it likely dips down. We simply lack the backlog necessary to make that kind of statement. Yet our expectation points that way, and our confidence in it is fairly strong. That represents essentially everything we can say for certain. As for everything else, honestly, we are working out how to prepare for whatever comes. I realize this provides little value if you're seeking a modeled forecast, but that is simply the reality we find ourselves in.

David Raso

analyst
#28

David, let me try to tackle this along the same lines. Looking at EPS growth quarter over quarter, I'm attempting to weigh some declines in China against expenses that return later in the year. Still, with your biggest segment, North America truck, getting stronger, it really seems like EPS ought to rise from 2Q. Nothing you pointed to would imply otherwise. Then in Q4, roughly $0.40 to $0.45 of EPS cost comes back. So, just for a baseline — I realize you won't provide guidance, just the baseline — do you believe your 2Q EPS marked the lowest quarterly EPS of the year?

Mark Smith

executive
#29

David, it's too soon to tell, since we can't see past the third quarter.

N. Linebarger

executive
#30

I'd concur with that, David. And it truly comes down to the same idea I raised earlier regarding how this illness plays out across those various markets. My thinking is that if we're expecting conditions to not deteriorate relative to now and actually begin improving, both in the U.S. and Europe, in certain areas where our markets are strong, should those trends keep improving consistently, then what we hope for is — as you pointed out — greater demand across our key markets, even if things dip somewhat in the extremely hot China; and that should more than make up for it. It would also counterbalance the expenses returning to the business. But as we observed occurring in July, from an illness standpoint everything moved in the wrong direction. It appears as though every location began reverting almost to the initial phase. If you happen to be in Indiana, our headquarters state, they implemented a fresh mask mandate this Monday. So it's — we simply cannot predict where that leads. And I realize, once more, that this is frustrating for us. It's frustrating for you too. But regarding that fourth quarter matter, when we did our planning back in May, we figured, "Oh, the fourth quarter is when things begin to pick up. That's the point when these temporary costs could be removed and we'll have revenues to support that, and that will be fine." And now the sole thing we question is whether that holds; it appears as though it ought to, yet we simply don't know.

David Raso

analyst
#31

That makes sense. I'm simply attempting to reason through the fact that we see decent EPS improvement quarter over quarter in 3Q. Should the unfavorable case materialize for 4Q, are you able to scale back that $0.45, $0.40 EPS blow from expenses returning? Or is that more or less locked in when it comes to employee compensation for the fourth quarter?

N. Linebarger

executive
#32

We gave our workforce a promise that in the fourth quarter we would bring comp back; we believe we've likely already gone as far as possible in that direction with paying staff reduced wages for — plus reducing their hours; therefore our position is that, regarding that portion, we intend to undo it. The variable comp, as you're aware, simply follows whatever our earnings turn out to be. Consequently, should earnings prove weak, variable comp will keep coming in below what was planned. Thus that will remain a savings versus what we had planned; so one portion stays and another portion would not be reinstated. And then I believe, as we discussed earlier with Jamie, that's — our sense regarding restructuring is that should it arrive — if we sense revenues truly won't return, I mean, if this isn't merely Q4, if it's set to persist for some time, then we'll need to consider how we implement additional structural expense measures near the close of the year so we're positioned correctly. So Q4 is curious, yet honestly, 2021 would truly be where those measures center, correct? That's genuinely where — so attempting to forecast, if revenues don't return in Q4, does that signal there's a sustained downward trajectory? Or are they — are they merely — is it merely a temporary dip and they're on the verge of returning? And that's the thing we'll need to determine. And I believe we'll possess far more data on that during our upcoming earnings call, and we'll manage to provide you folks a significantly clearer picture of what we're seeing. Yet once more, I believe what you should anticipate from us is that no matter which scenario unfolds, we'll be handling expenses in a suitable and forceful manner. And we won't be — we will retain the expenses that we believe are entirely tied to the expansion and profitability of the company's future; so those — that will be the equilibrium we'll be achieving, and we'll keep rebalancing and achieving it anew based on sort of what we observe regarding revenue. But I believe Mark's remark was the finest; it's sort of a revenue matter from now through the close of this year. Should revenue pick up, then Q2 will be entirely low. And should it not, then it won't, correct? Should it begin declining once more, then it won't.

David Raso

analyst
#33

Turning to Tom about the back half of the year. Inventories are up 2%; I get how abrupt those shutdowns were early in 2Q. Still, thinking about the inventory position as we leave June, first off, what's your comfort level with where inventories stand, and roughly where do they sit? Say it's North America truck — we've all heard about PACCAR — and you'd figure, fine, having a handful of extra ISX15 liters sitting around isn't terrible, whereas in off-highway you'd rather not carry too much inventory. Could you give us some sense of where inventory sits across the company?

Livingston Satterthwaite

executive
#34

David, it's Tony here. Yes. David, Tony speaking. Yes; we aren't pleased — Tom, Mark, and I aren't pleased with the inventory position as we closed the second quarter. What I can say is that it did come down during June, so — and as our balance sheet shows, AP has dropped considerably, so we've clearly cut back on purchases. The bulk of what we hold sits in raw material and inside our plants; it isn't finished goods. It isn't completed engines. So we were simply coping with those extremely abrupt shutdowns. And if you look back to earlier in March, we actually had concerns about keeping supply flowing. So back in March we were pulling inventory in to make sure of supply, and then we devoted the entire second quarter to handling the drop in demand. So on the whole, I have confidence in the direction inventory is heading, though it was a hard quarter to manage inventory. And I believe we did well, and I believe we have a handle on it now. We understand what we're doing. We've got it under control ourselves, and I don't feel exposed in any respect whatsoever.

Analyst

analyst
#35

Just a quick follow-up on the near term. Industrial might be lower than it was a year ago, yet it could come in level quarter to quarter even with oil prices swinging wildly and rig counts falling. That looks like a positive sign. Could you describe the month-to-month patterns you observed in that segment? Did things get better step by step as the quarter went on and crude prices rose? What about any supply lines and site support tied to O&G, or maybe mining?

Livingston Satterthwaite

executive
#36

Yeah. Tony here. I'll handle that one. The brief response, I suppose, is not truly. We — I believe you've seen our figures. Oil and gas dropped 88%. Relative to a year ago, I'd say we truly haven't witnessed any recovery in North America in the regions where we're strong. On mining, there's been slight gains in hard ores across copper and iron ore, while cores and those OEMs in copper cores are still soft. I'm sorry, I'm picking up a lot of feedback on the phones. I'm not sure whether it's my phone or other phones. Still, nothing in the quarterly trends suggests to us that mining or oil and gas appears meaningfully stronger. Specifically oil and gas, I'd say, was extremely quiet. We've seen declines in new engine sales, and our aftermarket business serving that area also appears rather weak.

Analyst

analyst
#37

All right, and then just one final thing. I mean, the margin performance in the distribution segment is really strong. I know at Investor Day you discussed your priorities when it comes to transforming that business, so I'm just trying to get a sense of anything particular you've done there. Has this downturn let you speed up any of the more lasting actions you were planning to take?

Livingston Satterthwaite

executive
#38

Yes, I appreciate the question. The way the distribution business performed makes us very happy, and in particular the progress of that transformation effort. The downturn — it hit us at a difficult moment, in the sense that we had actually wrapped up the restructuring and the broad reorganization of that business in February. And we were just beginning to establish our new operating routines, our new structure, and the way we now run the business, which was a major shift from a regional focus to a market focus. So we've had some difficulty, but the business has done really well. In the second quarter we have seen service and parts revenue decline, which we've discussed; but many of the steps they took on both cost and efficiency have truly paid off. And I have a lot of confidence that as demand begins coming back, and that business improves somewhat, we'll see solid performance. That business is affected more heavily by people cost, and so they gained more from the salary reductions and the cut to variable comp simply because that business is so people heavy. But we still believe we will achieve all of the improvements we intended to achieve in the transformation as we move through the remainder of this year; so we're very happy with how that business is doing.

James Hopkins

executive
#39

All right, that brings us right up to the close of the hour for this call. As I always do, I'd like to express appreciation to each of you for the attention you've shown toward Cummins, and later today I'll be around to handle whatever follow-up questions come my way. Thanks so much.

N. Linebarger

executive
#40

James, let me also chime in, and I appreciate you too. I'm sorry about the technical problems, and that includes my dog Ellie, who showed up uninvited. Still, thank you for sticking with us, and thank you for backing Cummins. So long.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Cummins Inc. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.

Get the API View API docs →

This call discussed

For developers and AI pipelines

Programmatic access to Cummins Inc. earnings transcripts and 132,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Cummins Inc. or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.