Cummins Inc. (CMI) Earnings Call Transcript & Summary

November 2, 2023

New York Stock Exchange US Industrials Machinery earnings 59 min

Earnings Call Speaker Segments

Chris Clulow

executive
#1

Alright, thanks a lot. Good morning, everybody, and thanks for joining this conference call as we go over Cummins' Q3 2023 results. Here with me are Jennifer Rumsey, our Chair and Chief Executive Officer, along with Mark Smith, our Chief Financial Officer. All of us will be around to take your questions once the call wraps up. Before we begin, I want to point out that certain things you hear or receive today will include forward-looking statements as defined under the Securities and Exchange Act of 1934. These statements convey our forecasts, expectations, hopes, beliefs, and intentions concerning future strategies. Actual results down the road might differ materially from what those forward-looking statements project, given various risks and uncertainties. You can find additional details about these risks and uncertainties in the forward-looking disclosure statement included in the slide deck, as well as in our filings with the Securities and Exchange Commission — especially the risk factor section in our latest annual report on Form 10-K and any quarterly reports on Form 10-Q filed afterward. Throughout this call, we'll touch on certain non-GAAP financial measures, and we'll point you to our website for reconciliations of those measures to GAAP financial measures. Our press release, which includes a copy of the financial statements, plus a copy of today's webcast presentation, can be found on our website in the Investor Relations section at cummins.com. With all that covered, I'll hand things over to our Chair and CEO, Jennifer Rumsey, to get us started.

Jen Rumsey

executive
#2

Thanks, Chris, and good morning, everyone. First, I'll give you a rundown of how we did financially in Q3, and after that I'll cover the sales picture and what's happening in end markets, going region by region. I'll finish with what we're expecting for 2023. After that, Mark will take you through more detail on our Q3 financial results as well as our full-year forecast. But before I get into the performance itself, I want to highlight a few important and exciting things that happened during the third quarter, which demonstrate that we're still carrying out our strategy. On September 6, a collaboration was formed involving Accelera by Cummins, Daimler Trucks and Bus, PACCAR, and EVE Energy. Their goal is to accelerate and bring local production of battery cells, along with the related supply chain, to the United States. The planned joint venture will manufacture battery cells intended for electric commercial vehicles and industrial uses, creating in-demand manufacturing positions across the U.S. in the growing clean technology industry. An estimated total investment of $2 billion to $3 billion is expected from the partners for the 21-gigawatt hour facility, and production is projected to begin in 2027. This partnership, in our view, gives us a way to split the investment with two partners we've worked with for a long time, push forward a technology solution that matters for our customers and our industry, and together speed up the energy transition here in the United States. Back in October, Cummins wrapped up its purchase of two Faurecia commercial vehicle manufacturing plants along with the related operations — one in Columbus, Indiana, and the other in Roermond, Netherlands. That deal slides right into the Cummins Emission Solutions business, and it should help make sure we can meet both today's and tomorrow's demand for low emission products. And last, Cummins rolled out a number of collaborations tied to our natural gas X15N engine, which give our customers even more support in hitting their decarbonization goals. Freightliner said it's partnering with Cummins to make the X15N natural gas engine available in its heavy-duty Cascadia trucks. In addition, Cummins and Knight Transportation, Inc. shared news that this biggest full truckload carrier in the industry completed a successful trial of Cummins' new X15N engine down in Southern California, running on renewable natural gas, which delivered lower nitrous oxides and greenhouse gas emissions while keeping performance intact. Set to arrive in North America during 2024, the X15N stands as the first natural gas engine built from the ground up for heavy-duty on-highway truck use. Let me walk you through our companywide results for Q3 2023 and touch on several of our major markets, beginning in North America and then covering the biggest ones outside the U.S. We kept seeing robust appetite for what we sell in a large number of our important markets and regions. Sales came in at $8.4 billion for the quarter, up 15% versus the same period in 2022, with the Meritor addition and healthy demand in nearly all worldwide markets fueling that gain. Keep in mind that Q3 2022 reflected two months of Meritor's consolidated results, since the deal closed on August 3, 2022. On the EBITDA line, we posted $1.2 billion, which works out to 14.6%, versus $884 million, or 12.1%, in the same period last year. Within the third quarter of 2023, there's $26 million tied to separating the Filtration business. That compares against what we saw in the third quarter of 2022, when we booked $77 million tied to acquiring, integrating and revaluing inventory from Meritor, plus another $16 million connected to carving out Filtration. Back those out, and the EBITDA margin for the third quarter of 2023 comes to 14.9%, which is better than the 13.3% we posted in 2022, since gains from stronger volume and better pricing more than offset the rise in selling, administrative and research and development costs along with inflation. The third quarter of 2022 also carried a one-time employee recognition bonus worth $56 million. R&D spending was up in the quarter as we keep putting money into products and technologies that should give us an edge down the road, especially within the Engine, Components and Accelera segments. On top of that, we saw operating cash flow reach an all-time quarterly high, bringing in $1.5 billion during Q3 2023, compared with $382 million in the same period of 2022. That result speaks to how consistently we've kept working capital discipline front and center throughout the company. I feel genuine pride in the way our leaders and employees drove cost reductions and maintained operational excellence to deliver this record-setting quarter, and looking ahead, our attention will remain on producing robust cash. In North America, third-quarter revenues rose 16% year over year to $5.2 billion, a gain supported by the Meritor acquisition as well as strong demand across our core markets. During Q3, the heavy-duty truck sector produced 74,000 units, which was 1% higher than what we saw in 2022. Our own heavy-duty sales hit 29,000 units, marking an 18% rise compared with last year—clear evidence that demand for our products remains strong. In medium-duty trucks, industry output for the third quarter of 2023 was 37,000 units, up 7% versus 2022. We sold 32,000 units in that segment, reflecting a 19% gain over 2022. For Stellantis and their ramp pickups, we shipped 41,000 engines during Q3 2023, the same volume as in 2022. Meanwhile, engine sales to construction clients in North America dropped 8%, largely due to a substantial buildup of inventory within the channel. North American power generation revenues rose 15% as industrial and data center demand picked up and supply constraints loosened somewhat. International revenues were up 13% in the third quarter of 2023 versus a year earlier, thanks to adding Meritor and solid demand in most markets. Third quarter revenues in China, joint ventures included, reached $1.6 billion, up 24%, as those markets keep recovering from an especially weak third quarter of 2022. Medium- and heavy-duty truck industry demand in China came to 243,000 units, 48% higher than last year. Our sales and units, joint ventures included, totaled 41,000, a 36% increase. Turning to China's light-duty sector, volumes climbed 14% versus 2022, landing at 442,000 units. Our shipments, counting joint ventures, finished at 26,000, an increase of 12%. On excavators, third-quarter industry demand came in at 40,000 units, a 30% decline against 2022. The contraction reflects weaker building-related activity. Our own sales were 7,000 units, flat versus 2022, as deeper adoption among new and existing customers offset the market pullback. For power generation equipment in China, third-quarter sales advanced 5%, driven largely by a slight improvement in markets outside data centers. In India, third-quarter revenue, including joint ventures, was $730 million, 13% higher than the same quarter last year. On the industry side, truck output was up 17%, and our own shipments increased 23%. In Power Generation, revenue dropped 16%, which reflects the pre-buy that happened in the second quarter before emissions rules changed. Let me now turn to our 2023 outlook and share a few thoughts on specific regions and end markets. Based on what we're forecasting right now, we're lifting our full-year 2023 revenue guidance to a range of 18% to 21% growth over last year. We're also tightening the EBITDA guidance range to 15.2% to 15.4%.

Jen Rumsey

executive
#3

Our outlook now calls for greater full-year sales within the Components division alongside improved earnings in Power Systems, though this gets partly canceled out by weaker profits in the engine unit stemming from a declining aftermarket and softer off-highway demand. Following a robust third quarter, we're lifting our North American heavy-duty truck projection to between 280,000 and 300,000 units for 2023. Our latest guidance anticipates reduced industry output during Q4. Although order books are still fairly healthy, inventory control, scarce truck components that cap our OEM build rates, and a lower number of working days all shape how we see that quarter. For the North American medium-duty truck sector, we're holding our full-year 2023 market size outlook at 135,000 to 150,000 units, which represents a 5% to 15% gain over 2022. Even as we keep striving to boost output by rebalancing work among our plants worldwide and strengthening the supplier base, other supply chain bottlenecks keep holding industry production back. As with our earlier guidance, engine shipments for North American pickup trucks should land between 140,000 and 150,000 units in 2023, matching 2022 volumes. Beyond that, we're keeping our outlook for North American construction at down 10% to flat, reflecting elevated channel inventory and easing market conditions. Turning to China, we anticipate total revenue including joint ventures rising roughly 15% in 2023, fueled by share gains, stronger volumes, and greater content; we foresee a 15% to 25% gain in heavy- and medium-duty truck demand plus a 10% to 20% gain in the light-duty truck market as it rebounds from 2022's depressed levels, and this matches what we said before. Even with China's truck market recovering slowly, the 15-liter natural gas engine we introduced in 2021 keeps delivering solid results. Thanks to a widening fuel cost gap, natural gas power should account for about 20% of the heavy-duty market by the close of 2023. In the brief period since we brought our new natural gas product to China, our share has climbed steadily amid enthusiastic customer uptake in the heavy-duty segment, and we anticipate that momentum carrying through Q4. We're eager to bring the 15-liter natural gas engine to North America in 2024. We anticipate China construction volume landing flat to down 10%, matching earlier guidance and reflecting a sluggish economy and reduced overall activity. For India, we expect total revenue including joint ventures to rise roughly 6% in 2023, in line with our earlier projection. We see industry truck demand coming in flat to up 5% for the year. We expect our key global high horsepower markets to stay robust throughout 2023. Mining engine sales should be flat to up 10%, matching our previous guide. We anticipate a 15% to 20% rise in revenues across worldwide power generation markets, which aligns with the guidance we previously provided. The data center and mission-critical markets are improving, and that's mainly what's fueling this robust performance. When it comes to Accelera, our projection for the entire year is sales between $350 million and $400 million, and we're also keeping our EBITDA guidance at an expected loss ranging from $420 million to $440 million for 2023. Over in Components, Cummins anticipates that the Meritor business will bring in revenues of $4.7 billion to $4.9 billion during 2023, with EBITDA landing somewhere between 10.5% and 11%. To wrap up, we're boosting our sales guidance to an increase of 18% to 21%, and we're tightening our EBITDA guidance range to between 15.2% and 15.4%. Our guidance for the entire year suggests that revenue will be weaker in the fourth quarter. Demand stayed robust in a number of markets, but several factors are contributing to the reduced run rate in Q4: softening aftermarket demand, a persistently weak outlook for China, ongoing industry supply constraints that are affecting truck production in North America, and inventory management efforts taking place across numerous markets. Given the reduced revenue forecast, we've started taking steps to cut costs within our business, especially when it comes to selling and administrative expenses. To bring costs down as we head into next year, we're extending a voluntary retirement option along with a voluntary separation program in certain regions and segments of our business, targeting eligible exempt employees. We'll keep a close watch on our end markets and evaluate whether more steps are needed, all while we keep investing in our future. In the quarter, we gave back $238 million to shareholders through dividends. Our long-term strategic aim is to return roughly 50% of operating cash flow to shareholders. The solid execution we saw in the second quarter of 2023 carried over into the third quarter, producing record operating cash flow even as our operating environment remained challenging. As we look ahead to what's possible, we have a strong and capable leadership team that will help us steer successfully through an exciting and evolving future. I was also happy today to announce a number of promotions within my leadership team, all of which take effect on January 1 of next year. To start, Srikanth Padmanabhan, who currently serves as Vice President and President of the Engine business, will step into a newly created position as Executive Vice President and President of Operations. In that capacity, Srikanth will do important work that will shape and drive enhancements in the way we function as a company throughout the energy transition and guarantee that our operational priorities succeed. Over his more than 30 years with Cummins, Srikanth has served across many of Cummins' businesses and regions and has consistently expanded the limits of customer-focused innovation, positioning Cummins as the leading powertrain supplier of choice in the shift toward a net zero future. Srikanth leads with results and people in mind, and he is the ideal person to head up this effort. Next, Brett Merritt, who right now serves as Vice President of On-Highway Engine business and Strategic Customer Relations, is going to step into the position of Vice President and President of the Engine business, taking over from Srikanth once he moves into his new role. Brett brings over 25 years working in the automotive and commercial vehicle industry, with more than 14 of those at Cummins. During the last 11, he led and expanded the On-highway business, going from 800,000 engines in 2012 to 1.2 million engines last year. Brett is a seasoned business leader and a trusted partner to many of our key customers, and I'm excited for Brett to lead this segment. Bonnie Fetch, who currently serves as Vice President of Global Supply Chain, is going to step into the position of Vice President and President of our Distribution business, taking over from Tony Satterthwaite, who has been acting as interim head of DBU. Bonnie, who earlier led supply chain for DBU, has led the Cummins global supply chain and manufacturing organization, including Cummins new and ReCon Parts since early 2022, where she guided her team through the many complex supply chain challenges as well as improved operational and functional performance. With more than 30 years of experience, including 20 years at Caterpillar, before coming to Cummins, she has general management, HR and supply chain leadership, and that makes her uniquely qualified for this role. I'm excited for her to leverage her broad experience to run this segment. This is a period of change for our company, and it's also an exciting one.

Jen Rumsey

executive
#4

To wrap up, I'd like to express gratitude to the people at Cummins, who keep putting in relentless effort so that what our customers require gets delivered. They're addressing these robust demand levels by guaranteeing that products meet quality standards, making our ties with customers stronger, and steering through supply chain difficulties that persist. What we've achieved shows how committed we are to generating solid operating results, putting money into growth down the road, and providing sustainable answers for decarbonizing the sector we work in, all while giving cash back to shareholders. At this point, I'll hand things over to Mark.

Mark Smith

executive
#5

Thank you, Jen, and good morning, everyone. For the third quarter, revenue reached $8.4 billion, marking a 15% gain compared with the same quarter a year ago. Sales in North America climbed 16%, and revenue from outside North America increased 13%. Organic sales growth came to 10%, driven by improved pricing and strong demand for our On-highway and power generation products. The Meritor acquisition contributed 5% of the total sales increase. EBITDA in the quarter was $1.2 billion, or 14.6% of sales, and that included $26 million of costs related to the planned separation of Atmus. In Q3 of 2022, EBITDA was $884 million, or 12.1% of sales. That number included $16 million in expenses related to the upcoming Atmus spinoff, along with $77 million in acquisition, integration, and inventory valuation adjustments tied to the Meritor deal. Excluding those Atmus separation charges and Meritor-related items, Underlying EBITDA was 14.9% for the third quarter, versus 13.3% in the same period a year earlier. The gain in that EBITDA margin came from favorable pricing, which let us offset higher input costs, and from lower logistics expenses — although those benefits were partly offset by higher variable compensation, which increased because the company's overall financial results were stronger. In addition, during last year's third quarter we made a onetime employee recognition payment of $56 million. Before I get into the specifics, I want to make sure we're looking at operating results on a comparable basis to our guidance. So in everything I say from here on, I'm setting aside the expenses associated with the planned spinoff of Atmus, along with the integration costs from the acquisition and the inventory valuation figures connected to the Meritor deal. Just to remind everyone, that Meritor transaction closed in August of 2022, and because of that timing we picked up one extra month of operating results in the third quarter of this year versus the same period a year ago. With that context, let me go through the details line by line. On gross margin, we posted $2.1 billion for the quarter, which works out to 24.6% of sales. A year earlier, that figure stood at $1.7 billion, or 22.9%. We saw gross margin improve 170 basis points. That came from better pricing, logistics costs, and the effect of last year's onetime employee bonus. Higher variable compensation expenses partially offset those gains. Selling, admin and research expenses totaled $1.2 billion, which was 14.1% of sales. That compares with $997 million, or 13.6%. The rise was mostly due to increased variable compensation as well as higher engineering costs tied to new products throughout the company. Income from joint ventures reached $118 million. That's $48 million above the prior year, helped by technology fees received and demand in China that is gradually recovering, lifting operational results. Our outlook for capital investments remains unchanged and is expected to fall within the range of 1.2%-1.6%. Other income came in at a negative $7 million. That's $20 million lower than the prior-year figure, driven mainly by foreign currency translation. Also in that line were mark-to-market losses on investments totaling $28 million. Interest expense was up $36 million, mostly from higher rates on the floating rate portion of our debt. For the third quarter, our all-in effective tax rate was 21.4%. That figure included $5 million, or $0.03 per diluted share, of favorable discrete items. Consolidated net income for the quarter was $656 million, or $4.59 per diluted share. That number includes $26 million, or $0.14 per diluted share, of costs tied to the Atmus spin-off. In the same period a year earlier, Q3 all-in net earnings were $400 million, or $2.82 per diluted share. That total included $16 million of costs connected to the planned Atmus separation, plus $77 million in acquisition and integration expenses from buying Meritor. All-in operating cash flow reached a quarterly record inflow of $1.5 billion — $1.1 billion above the prior year — helped by healthy profits and our continued focus on managing working capital. Strong operating cash flow remains a key priority for us, and Q3 progress was encouraging. Next I'll cover how each segment performed and our 2023 outlook. Note that this guidance assumes Meritor and Atmus operate for the full year and excludes any separation-related costs or benefits for Atmus. It also sets aside any impact from cost-cutting efforts within Cummins during Q4. As Jen mentioned, we're raising our company revenue forecast to 18% to 21%, a slight increase from the 15% to 20% we guided previously, reflecting strong North American demand. For EBITDA, the expected figure is now 15.2% to 15.4%, compared with the 15% to 15.7% range we gave earlier. We're also narrowing the EBITDA ranges across most of our business segments. Components segment revenue was $3.2 billion, up 20%, with EBITDA at 14.2%. Versus the same period last year, EBITDA dollars rose from $384 million to $461 million. On Meritor — Cummins Meritor had Q3 revenues of $1.2 billion with EBITDA of $129 million, or 11% of sales, a big increase from a year earlier and right in line with what we expected; for the Components segment overall, we now expect 2023 revenues to rise 35% to 40%, which is 3% above our earlier revenue guidance, with EBITDA between 14.2% and 14.7% versus the 14.1% to 14.8% range we had previously. Within Components, Meritor revenues should come in between $4.7 billion and $4.9 billion, unchanged from prior guidance, while EBITDA is forecast at 10.5% to 11%, compared with the 10.3% to 11% we projected before. There are plenty of minor adjustments across individual segment guidance as we get closer to year-end. In the Engine segment, Q3 revenues were $2.9 billion, a 5% gain over the prior year. EBITDA came in at 13.5%, up from 13% in 2022, driven by operational improvements and the one-time employee bonus that landed in the prior year. Now for 2023, within the Engine business, we expect revenues to rise 2% to 7% — consistent with our earlier guidance — and EBITDA to land between 13.6% and 14.1%. We finished a bit below the 13.8% to 14.5% range we'd previously indicated, since aftermarket sales kept softening and demand weakened across a few off-highway markets. Moving to Distribution, revenues reached $2.5 billion, up 13% from the same period a year ago. EBITDA margin rose to 12.1% of sales versus 10% last year, on the strength of higher volumes, better pricing, and the onetime employee bonus from a year ago. For Distribution, we expect revenues to grow 10% to 15%, unchanged from prior guidance, and we're narrowing our expected EBITDA range to 11.9% to 12.4%. Over at Power Systems, revenues hit $1.4 billion, a 7% increase. EBITDA improved to 16.2% from 14.3%. That marks a sixth straight quarter of margin expansion, with pricing, higher volumes, operational improvements, and cost-reduction actions all contributing to the ongoing gains. For 2023, we expect revenue growth of 8% to 13%, in line with what we said previously. We're also raising our EBITDA guidance to 14.8% to 15.3%, up from the prior 14.3% to 15%. Seller revenues surged to $103 million, more than doubling, driven by electrolyzer project deliveries, stronger North American school bus demand for battery electric systems, and the electric powertrain portion of the Meritor business acquired through the Siemens Commercial Vehicle deal. The $114 million EBITDA loss in that segment will continue to drive solid growth ahead. On both the top line and bottom line, guidance is unchanged: revenues of $350 million to $400 million, with net losses of $420 million to $440 million. For 2023, we anticipate an effective tax rate of about 22%, excluding any discrete items. Our outlook for capital investments is unchanged and expected to be in the range of 1.2%-1.6%. Capital investments remain on the same outlook, projected between $1.2 billion and $1.3 billion; we stay focused on deploying cash into investments that support profitable growth, reduce debt, and return cash to shareholders through dividends this year. To wrap up, our third quarter delivered strong revenues, solid earnings, and a record high for cash generated by operations. We'll stay focused on disciplined working capital management, maintaining strong margins, and investing in the products and technologies that drive tomorrow's growth. On last quarter's call, we flagged early signs that aftermarket demand was moderating and that some industrial sectors were seeing weaker demand. Those trends, combined with fewer production days in the fourth quarter, should result in lower sales and earnings. As Jennifer mentioned, we've already begun some cost-reduction actions, and we'll monitor our end markets closely while assessing whether additional steps are necessary. Regarding how we'll deploy our money during 2023, the objectives I've set forth involve putting funds back into the business to expand, lifting the dividend, and reducing what we owe. During July, we announced an increase of 7% to the dividend, which represents 14 consecutive years of raising it each quarter. Also, once the third quarter wrapped up, our debt had been lowered by $390 million. Beyond that, during October we brought debt down by an additional $650 million, which is consistent with our plan for this year. Our outlook for capital investments is unchanged and expected to be in the range of 1.2%-1.6%. Thank you all for your attention today. With that, I'll return the floor to Chris.

Chris Clulow

executive
#6

Mark, thanks. To be fair to everyone else joining us, please keep it to a single question plus one follow-up. Should anything further come to mind, you're welcome to get back in line. Operator, let's take the first question now.

Jerry Revich

analyst
#7

Jennifer, nice work on the joint venture involving PACCAR and Daimler. Thinking ahead to how this affects Cummins product availability and what you offer within EVs, could you go deeper on that, specifically the chance to bundle it alongside eAxles and battery management systems? Also, would you mind addressing whether there's any intention to leverage the plant for sourcing batteries on a global basis for your customers? Or does this stay strictly U.S.-focused at the outset? I'd really appreciate your wider perspective.

Jen Rumsey

executive
#8

Sure. Jay, let me give you a bit more detail regarding what this partnership involves. Like I mentioned, battery cell manufacturing is the core focus here. In the past, our investments and attention went toward battery packs, eAxles, motors, inverters, other key components, and integrated powertrains for the electrified powertrain. Alongside our partners, we recognized a need to move battery cell production into the U.S. and truly engineer what we believe will be a winning cell solution for commercial vehicles and industrial applications. The battery packs Cummins produces will be supplied with this. PACCAR and Daimler trucks here in North America will also receive the cell for their battery cells, and it's genuinely aimed at the U.S. market, providing a domestic offering that we believe will truly lead the market. Regarding the chemistry involved, we'll keep offering battery packs globally along with chemistries such as LFP and NMC. This particular one, though, centers on LFP technology, which, again, together we believe will be a winning commercial vehicle battery cell chemistry — lower cost, better durability, reduced dependency on certain minerals that are harder to source, plus improved safety. So it's a really strong opportunity for us, and it also keeps us closely tied to those 2 partners as we launch these electrified powertrains. Through our packs, our intent is to offer that battery cell to other commercial vehicle and industrial applications here in the U.S. too.

Jerry Revich

analyst
#9

All right, that's great. And Mark, may I pose a somewhat nearer-term inquiry regarding the Engine segment? You people delivered quite strong results during the quarter and across the year. The lower margin rate at the midpoint looks like a considerable drop in profitability that's implied for Q4 relative to Q3. Could you simply explain whether that's a meaningful cut in production, the China JV? Or is it merely selecting the midpoint of the range rather than considering the wider, perhaps better potential results at the upper end?

Mark Smith

executive
#10

Yeah, I'd say it isn't tied to China. What it's tied to is the reality that fewer production days lie ahead. That aligns with what the industry has forecast for reduced heavy-duty truck output, which comes as no shock, yet it's what we've essentially been anticipating for a few quarters now. What has genuinely shifted over the year, Jerry, is the downturn in aftermarket, especially as it flows through the engine business. Certainly, a portion of that stems from customers right-sizing inventory. In my view, the true underlying pace of decrease is smaller than the headline figure, since we've moved out of a stretch when everyone was scrambling to match demand, and now, like us, lots of companies are examining inventory positions and attempting to right-size. Still, to give you a feel for it inside the engine business, comparing Q1 of 2023 with Q4, parts revenues have fallen roughly 18%; so it has been sliding every occasion we've examined it. So that's the single shifting pattern. I don't believe it's a sign of what's coming. My sense is it's largely inventory corrections. Yet that, together with fewer production days and reduced absorption, means that yes, despite revenues holding steady for Q4, things will be somewhat harder. And that's among the reasons—not the sole one—that we chose to launch the steps we talked about earlier; we aren't forecasting anything like a steep drop in our revenues at all. We can't see clearly, obviously, a flattening out or a modest decrease in certain areas, but we consider it wise both to carry out the cost-cutting steps and to maintain our emphasis on cash flow and debt reduction, which ought to give us the strongest odds of achieving real success in 2024.

Chris Clulow

executive
#11

Just one more thing to mention, Jerry. It won't affect the guidance we've given for the engine business as a whole, but there's a distinction between Q3 and Q4: our JV income does decline due to the timing of license fees. A substantial amount of that occurred during the third quarter, and it drops roughly 40 basis points for engine business margin going from Q3 to Q4. So I hope that clarifies things.

David Raso

analyst
#12

I'd like to understand the decisions around taking out costs. To what extent does that tie into what you anticipate for '24, and could you share any perspective on what that looks like? Also, perhaps margins in '23 represent a somewhat bigger challenge to improve than what we typically observe throughout the machinery sector generally. I'm just wondering how much of that is inherent to how '23 is unfolding compared to your outlook for '24? And clearly, any indication of the size of those cost reductions would be quite useful.

Jen Rumsey

executive
#13

Sure, David, I'll begin and then Mark can chime in if he has anything to contribute; so like we mentioned, we observe that a number of our markets have flattened out. We're noticing some softening in certain markets, aftermarket, off-highway; and we keep concentrating on continuous enhancement and profitability and performance of our business and leveraging softening markets as an additional chance to remove costs. So we still observe considerable strength as we head into next year; we won't offer guidance for 2024. What I can say today is if you examine backlog and heavy-duty truck and medium-duty truck keeps looking pretty robust as you move into the first half of the year. Power generation is extremely strong, and so we aren't noticing any steep decline, but we believe it's prudent to implement some cost-reduction measures here in Q4 and then keep watching the situation, and if additional steps are needed, naturally, we would keep doing that.

Mark Smith

executive
#14

A more complete picture regarding both the expense side and the benefit side will be provided during our upcoming quarterly earnings call. Naturally, the measures we are unveiling right now are voluntary, which means the precise participation rate remains unknown to us, along with how we evaluate the sort of forward momentum taking shape in markets. A handful of additional, smaller measures involving facilities and similar items will also occur. All of that, though, will be spelled out thoroughly next quarter, once we hopefully possess a sharper picture covering the entirety of next year.

David Raso

analyst
#15

That's useful. Perhaps you could enlighten me about a particular point. The remark regarding engine margin during the fourth quarter leaves me somewhat puzzled, and I value what Chris said concerning JV income, specifically how that is going to affect the move from 3Q into 4Q, yet you pointed out a benefit from a smaller parts impact in the fourth quarter; however, when I look at the components business, which clearly also contains a great many parts, it sounds as though you are suggesting a robust fourth quarter for component margins. So could you enlighten me as to the reason for this discrepancy — one division is being hurt on parts, and the parts division you would expect, for aftermarket, and even more so components, is seeing margins step up during the fourth quarter, or at least that is how it seems...

Mark Smith

executive
#16

Within the engine business, the parts business is considerably larger in size than the aftermarket business within Components.

David Raso

analyst
#17

Absolutely. I believe it's a matter of one step lower versus one step higher; perhaps my calculations are correct, yet it appears the component suggests quite robust margins for the fourth quarter.

Mark Smith

executive
#18

Indeed, I'd say things are fairly steady. That's simply the interplay we're observing across the 2 distinct businesses at present.

Jen Rumsey

executive
#19

Okay, so for both of those segments, we're looking at reduced volumes in North America's medium- and heavy-duty truck market during Q4, and that ties back to what I laid out earlier. Honestly, it comes down to two things working together: an emphasis on bringing inventory down, plus supply constraints that keep holding OEMs back from producing enough to meet all the demand. We anticipate that during Q4, this will hit our revenues across both of those segments.

Mark Smith

executive
#20

In any short-term window, David, customer demand for Components versus engines can diverge somewhat. Over the longer run, or across several quarters in the medium term, I'd agree with you that they ought to line up fairly closely. What we're seeing right now, though, is somewhat greater strain on the parts tied to the engine side, and not every one of those parts comes straight out of our Components business. That's the key point.

Rob Wertheimer

analyst
#21

There are a couple of things I want to ask about. The first concerns the Parts destocking you brought up, which certainly seems logical. What I'm wondering is whether you have a feel for how much inventory the channel typically holds — are we completely past it, or only halfway? If you can put a number on that opportunity, that would help.

Mark Smith

executive
#22

That's somewhat difficult to pin down. What we generally observe more distinctly on the Power Systems side is destocking nearly every year as we move into Q4. Some of that is happening now, along with softer rebuild activity, especially in the portion of the oil and gas market we serve, Rob; however, on the engine side — specifically On-highway — the pattern appears to have been a more extended, multi-quarter process. Part of the reason, I believe, is that attention went to prioritizing OEM newbuilds and first-fit production while we were ramping up through the cycle and dealing with supply chain challenges. Parts then had to play catch-up, and at this point we're seeing truck utilization flatten out. Everyone is working to improve how they manage inventory. My sense is that we're approaching the low point of that process right now. Naturally, that always hinges on the economic conditions and the base level of truck utilization. So if you asked me today whether I believe we're on a clear path toward meaningfully lower parts in Q1, my answer would be no; it seems the biggest move has already occurred over the last 3 quarters, based on what we currently know.

Rob Wertheimer

analyst
#23

Great. Then, may I pose something that takes a wider view regarding China? Clearly, many industrial companies have faced significant softness there. Perhaps things have hit a floor across every one of your end markets, or perhaps only certain ones. Could you share your top-level perspective on the state of that economy, and whether the way fleets behave means you essentially must be in a rebound posture — does that hold for trucks, for power gen? Or perhaps walk us through China broadly, describing what you're seeing across various portions of your business when it comes to a rebound?

Jen Rumsey

executive
#24

Sure. Looking at the market in China, well, broadly speaking, economic activity there has kept being rather soft. Conditions in 2023 improved relative to 2022, when COVID lockdowns hit them hard, producing even more severe softness. So some betterment has appeared; we've witnessed robust appetite for natural gas heavy-duty engines, driven by the price gap separating natural gas from diesel in that country. We've largely gotten past the emissions transition in the On-highway market. Consequently, should the economy there rebound, and keep rebounding, I believe that will keep helping our business. Plus, thanks to the product investments we've undertaken and the emissions change, our content will be greater, and we expect to keep growing our penetration. So we'll monitor whether government stimulus begins generating favorable momentum and economic activity, though it has remained comparatively soft during this year.

Mark Smith

executive
#25

Yeah. I mean, just to give you a sense — I realize we're not fans of discussing individual months — but July was, like, the weakest in 10 years, right, for some of what our JVs produce. Since then it's edged up, but it's still been hard. Again, it isn't worse than our expectations, but that just shows you how soft things were during the summer. With luck, there's improvement ahead, but we lack solid visibility into that.

Chris Clulow

executive
#26

Right, regarding that bond of RMB 1 billion being planned — I'd say it's a positive sign watching the government take action there. That won't have any effect on the fourth quarter, but ideally it brings about additional infrastructure expansion as we move into next year; we'll just have to watch how things develop and see where we land.

Tami Zakaria

analyst
#27

I'd like to inquire regarding your Power Systems segment. The margins were extremely robust. Revenue growth is also solid. Yet looking at the Q4 guidance, it appears you're pointing toward a sequential decline of nearly 200 basis points; I just want to understand what's behind that? Is it being cautious? Or is there anything we should know about concerning Q4 for this segment?

Mark Smith

executive
#28

Correct. The positive side is that performance has been excellent. That's the foundation, and I believe that's — we anticipate this will keep going. Like I said before, usually we observe, especially regarding the industrial portion of this operation, that customers significantly cut back on buying parts during Q4; this isn't a new phenomenon, but it generally occurs each Q4, and that's likely the primary driver — the biggest adverse element. Apart from that, underlying demand remains robust. Nothing significant has shifted with regard to pricing or our cost structure.

Tami Zakaria

analyst
#29

Understood — that's really useful. Now, on the topic of research and development spending: it's risen quite a bit across the past 5 years. How are we supposed to view that expenditure, say, across the coming 2 years? Any additional detail on it?

Jen Rumsey

executive
#30

Yes, Tami — as you pointed out, we're in a stretch of heavier R&D investment, which we believe puts Cummins in a strong position going forward. Specifically, from now until the '26, '27 window, when we roll out those new fuel-agnostic engine platforms, we're putting in substantial R&D and capital outlays, and those efforts are winning fresh customer business for us while also setting us up to hold leading products through the energy transition. We've likewise been boosting what we put into the Accelera business as we scale up product investments for our electrolyzers and witness rising demand for electrolyzer volume, plus in the electrified components. So that essentially explains what's showing up in the R&D line. Beyond that, we keep concentrating hard on lifting underlying performance and efficiency in other areas, so that we remain able to keep making the R&D investments we need.

Mark Smith

executive
#31

Right. That's the reason we've been pushing hard on SG&A and will keep at it — also on gross margin — so that we can expand margins, expand investment, expand the bottom line, and keep making the cash better; that's the straightforward approach we're pursuing. We would want to see cash flow rise. Engineering will stay at these elevated levels for some time still. And the new engine business platforms are also adding to the — yes, CapEx being greater in dollar terms. As a percentage of sales, it falls within what we expect; but over the next 2 years, we have this renewal of these major platforms, which matters for our future.

Tim Thein

analyst
#32

My first question concerns Power Systems. I'm simply wondering what sort of visibility you have as we look toward '24. Backlog wasn't really something we discussed in the past with Cummins. Still, considering how long the lead times are for large engines and the visibility that comes from a rebuild standpoint, could you perhaps describe where you believe you'll finish the year in terms of — once more, I realize you aren't providing '24 guidance, but any assistance you can offer regarding what revenue visibility you'd anticipate having when the year ends in that business?

Mark Smith

executive
#33

Yes, Tim, you're correct that visibility is greater, yet long lead times exist along with the fundamental demand. Without a doubt, I believe we have excellent visibility across the first half of the year; and naturally, we're observing — we're expecting additional pressure on the On-highway side simply because, not a severe downturn, but by and large, those participating in the market anticipate some moderation in heavy-duty truck orders as we head into next year. Thus, we'd anticipate additional revenue headwinds on the engines and components side. Distribution, as you're aware, is driven very heavily by aftermarket demand. So barring some enormous collapse in the economy, that ought to be more stable, and afterward Power Systems, undoubtedly, has very strong visibility across the first half of the year and some into the second half; we haven't witnessed a dramatic shift in trajectory at this moment.

Jen Rumsey

executive
#34

Yeah. As Mark mentioned, we're still keeping an eye on the Power Systems markets, and over in the industrial markets, there's been some slight softening in oil and gas — that's a fairly small market for us, and it kind of moves in reverse. So that one has eased up a bit. Then with Power Gen, you're seeing quite a lot of growth in 2025; and for our business, I anticipate demand will stay strong in the data center market, and we're in a good position there.

Mark Smith

executive
#35

It's also a positive sign that Power Systems, as well as distribution, are now seeing margin growth across multiple periods, which puts us in a good position moving ahead.

Tim Thein

analyst
#36

Yeah. All right. Then there's been quite a bit of talk regarding your on-highway parts operation. Once more, I realize this is likely somewhat of an apples-to-oranges comparison, but I've just been listening to what your biggest customer has said and their view of their own parts business. What's your take — again, I recognize you don't wish to talk on their behalf, but what do you figure is the — you brought up a decline of 18%, I believe since the start of the year. I think theirs is roughly 2% or 3% lower. In your view, what's causing that gap between what you're seeing and what at least a few of the OEMs are seeing? And yes, I understand these businesses aren't a perfect match, yet presumably a lot of the same forces are hitting them. I'm just wondering what's behind that.

Mark Smith

executive
#37

Broadly speaking, I'd say it comes down to destocking, correct? We've seen — we have — clearly, we're aware that return volumes and similar items across every portion of our channel have risen while customers have gone deep.

Jen Rumsey

executive
#38

Yeah. I believe it's genuinely crucial to point out that throughout this cycle, there are 2 very distinct dynamics brought about by supply constraints compared to what you'd have witnessed before. So demand in the aftermarket is genuinely robust. And given those supply constraints, obtaining parts proved difficult for a number of our customers. Consequently, quite a bit of attention went toward accumulating inventory as a way to cushion against those constraints, along with an emphasis, honestly, on closing the gaps—which produced an inventory overbuild. So with some of those supply difficulties now having subsided, bringing inventory back to suitable levels has become a priority, and that has caused a decline extending past the real aftermarket demand in service. And the identical thing holds true and is occurring with the first-fit build—we've faced supply constraints that restricted our capacity to satisfy industry demand, and you observe that causing the markets to remain strong for a longer period than you'd normally witness, plus sustained solid demand for first-fit trucks.

Mark Smith

executive
#39

Taking a step back from all the static during this sort of adjustment stretch, Tim, it's obvious that in the North America On-highway markets our share has risen significantly, so that ought to work out fine when it comes to the components that are bound to be bought via Cummins. In my view it's simply a matter of this adjustment stretch. What I was attempting to do this time was supply that additional detail to clarify what I believe is a near-term impact on margin, rather than the longer-term direction of the market.

Steven Fisher

analyst
#40

I'm just wondering, when you look ahead to 2024, how clear a picture do you have regarding pricing for On-highway engines? To what degree would your pricing hinge on what your OEM customers charge, or can it stand apart from that?

Jen Rumsey

executive
#41

Right, as we mentioned before, we enjoyed favorable price versus cost during this year, and we keep concentrating on pricing through launches of new products and in areas where inflationary expenses have shown up; so our aim is to sustain that beneficial price/cost relationship; and naturally we are observing somewhat of a deceleration in market pricing, yet we anticipate retaining a portion of that.

Mark Smith

executive
#42

Okay, then once we put out guidance for the coming year, I'm certain you'll be asking about pricing and costs. We'll gladly talk through how that's trending.

Steven Fisher

analyst
#43

Absolutely. And could you go into more detail regarding what you said about the construction sector's prospects? I believe you mentioned inventory corrections in North America, yet perhaps you could address the wider worldwide perspective on engine demand for construction uses and your expectations for how 2024 might shape up. Is this a matter of demand, or more about managing inventories in the short term?

Mark Smith

executive
#44

Part of this may relate to how old construction fleets are, correct? Thus, we are observing a decline in engine demand. That does not automatically indicate a major change in construction operations across North America. North America, China, and Europe constitute the 3 largest markets. Broadly speaking, it appears that economic expansion in Europe is decelerating. Regarding China, it caught us somewhat off guard that demand for construction machinery has not declined more sharply, considering certain issues affecting the general financial condition of the construction industry there, though it has decreased somewhat. Still, as we head into the following year, I would say there is no definitive picture yet, and among all these markets, Steve, we have more investigating left to do before determining where we end up next year.

Noah Kaye

analyst
#45

You mentioned that some positive testing is happening with the X15N before it arrives on the market next year, so I'd really like a bit more detail about what you expect on the demand side, how much this might fuel share gains, and where you're picking up the strongest signals of demand for that product.

Jen Rumsey

executive
#46

Right. As I said, we're bringing the X15N to North America next year, and it's doing well in China. Naturally, we'll offer a U.S. variant that satisfies the regulations in place here next year, and availability will come through 2 of our OEMs. Beyond that, we're watching end customers test it and show interest, and we'll be the sole heavy-duty natural gas offering available in North America. That clearly opens up some opportunity for us, since customers who already have infrastructure, environmental targets, or even savings on operating costs tied to natural gas will increasingly move toward adopting that solution. So there's definitely some opportunity in that space.

Noah Kaye

analyst
#47

All right. Next, I believe we'd appreciate an update regarding the electrolyzer backlog and the quoting pipeline. Has the trajectory shifted at all? Was there anything that stood out to you over the quarter? Also, could you bring us up to speed on your progress when it comes to expanding capacity?

Jen Rumsey

executive
#48

Sure. Honestly, we remain on the very path we've described before — increasing our manufacturing footprint in the U.S. and Europe, and seeing the backlog keep expanding. Right now we're commissioning a 25-megawatt electrolyzer alongside Florida Power and Light across this year. That makes another sizable project we're set to deliver in 2025, and we keep scaling that business just as we've outlined in the past.

Chris Clulow

executive
#49

We appreciate you taking the time to join us today. And, as is our usual practice, the Investor Relations team will be reachable by phone and ready to address whatever additional questions you might have. Thanks.

Operator

operator
#50

That wraps up the call for today. At this point you're free to drop off your lines. We appreciate you taking part.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Cummins Inc. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.

Get the API View API docs →

This call discussed

For developers and AI pipelines

Programmatic access to Cummins Inc. earnings transcripts and 132,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Cummins Inc. or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.