Cummins Inc. (CMI) Earnings Call Transcript & Summary
May 2, 2024
Earnings Call Speaker Segments
Chris Clulow
executiveThank you so much. Hello, everybody, and it's great to have you join this call as we go over what Cummins achieved during Q1 of 2024. Here with me are Jennifer Rumsey, who serves as our Chair and Chief Executive Officer, along with Mark Smith, our Chief Financial Officer. All three of us will be on hand to take your questions once the teleconference wraps up. Prior to getting underway, I want to flag that certain material you hear or receive today will include forward-looking statements as defined under the Securities and Exchange Act of 1934. Those statements convey our forecasts, expectations, hopes, beliefs and intentions concerning future strategies. A variety of risks and uncertainties could cause what actually happens down the road to differ materially from what such forward-looking statements project. You can find additional details about those risks and uncertainties in the forward-looking disclosure statement included in the slide deck as well as in our filings with the Securities and Exchange Commission — specifically the Risk Factors section of the annual report on Form 10-K we filed most recently, plus any quarterly reports on Form 10-Q filed after that. Throughout this call, we'll be covering certain non-GAAP financial measures, and we'll point you to our website for the reconciliation of those measures to GAAP financial measures. Our press release, which includes a copy of the financial statements, along with a copy of today's webcast presentation, can be found on our website in the Investor Relations section at cummins.com. Now that those items are covered, I'll hand things over to our Chair and CEO, Jennifer Rumsey, to get us started.
Jen Rumsey
executiveThanks, Chris, and good morning, everybody. I'll begin by summarizing how we performed financially in the first quarter, followed by a review of sales and end-market trends across regions. Then I'll wrap up with our 2024 outlook. After that, Mark will walk you through additional specifics regarding both our Q1 financial results and this year's forecast. Before diving into the particulars of our performance, I'd like to spend a moment calling out several significant developments from the first quarter. During March, Cummins wrapped up the spin-off of our Filtration segment, Atmus Filtration Technologies. Cummins will keep concentrating on pushing forward innovative power solutions, while Atmus is now favorably positioned to pursue its own roadmap for profitable growth. We take pride in our employees' dedication and everyone who contributed to pulling off a successful separation, and we're eager to see what lies ahead for both Cummins and Atmus. The last stage of the Atmus separation produced a tax-free share exchange that lowered Cummins shares outstanding by 5.6 million. Beyond that, we brought back our fuel-agnostic platforms under a name that reflects the innovation driving us forward: the Cummins HELM platform. Offering greater efficiency, reduced emissions and a variety of fuels, the Cummins HELM platforms let our customers decide how they steer their own paths through the energy transition. As the following product on the Cummins HELM 15-liter platform, we revealed plans to introduce the next-generation diesel X15 in North America for the heavy duty on-highway market, and it will meet U.S. EPA and CARB 2027 aligned regulations when it launches. Finally, in April, Cummins Power Generation added 4 new generator sets to the award-winning Centum Series, driven by Cummins QSK50 and QSK78 engines; these fresh models were designed specifically for the most critical applications, including data centers, health care facilities and wastewater treatment plants. I was thrilled to join the launch event alongside our customers and hear about rising demand for these critical applications and strong enthusiasm for our genset products, which draw on decades of experience serving our customers' needs and deliver a step change improvement in power density, assured reliability, sustainability and low emissions. Now I'll speak to the overall company performance for Q1 of 2024 and touch on several of our key markets. Demand for our products stayed robust across many of our key markets and regions. First quarter revenues came in at $8.4 billion, down 1% versus the first quarter of 2023. EBITDA reached $2.6 billion, or 30.6%, compared with $1.4 billion, or 16.1%, a year earlier. Results for the first quarter of 2024 include a gain, net of transaction costs and other expenses, of $1.3 billion tied to the Atmus divestiture, plus $29 million of restructuring expenses as we keep working to simplify our operating structure and boost the efficiency of our business over the long term. When you set that against what we posted in the opening quarter of 2023, that period carried $18 million in expenses tied to spinning off the Atmus business. If you strip out the onetime gain, the Atmus separation costs, and the restructuring charges, our EBITDA margin fell 80 basis points, since better pricing only partly made up for softer volumes and greater research and development spending, reflecting our ongoing commitment to putting money into products and technologies that will deliver advantages down the road. Gross margin dollars came in higher than the opening quarter of 2023, because pricing gains outweighed the effect of weaker volumes and rising supply chain costs. North American revenues for the first quarter held even with 2023. Heavy-duty truck industry production reached 73,000 units in the first quarter, a 5% decline versus 2023 levels, and our heavy-duty unit sales came to 26,000, 7% below 2023. Medium-duty truck industry production totaled 41,000 units in the first quarter of 2024, up 8%, and our unit sales hit 36,000, a 22% rise over 2023; we delivered 38,000 engines to Stellantis for Ram pickups during the first quarter of 2024, 2% fewer than 2023 levels. North America power generation revenues climbed 21%, powered by sustained robust demand for data center and mission-critical power. Our international revenues slipped 1% in the first quarter of 2024 versus a year earlier. China revenues for the first quarter, joint ventures included, came to $1.6 billion, a 5% drop, as weaker domestic volumes were partly offset by accelerating data center demand. Chinese industry demand for medium- and heavy-duty trucks reached 305,000 units, up 14% from last year. Yet market share shifts during the first quarter produced a year-over-year decline in our volumes. China's light-duty market rose 2% over 2023 levels to 486,000 units, and our units sold, joint ventures included, totaled 37,000, up 3%. Excavator industry demand in the first quarter was 50,000 units, 13% below 2023 levels. That smaller market stems from weak property investment, a high equipment population, and slowing export demand. Our units sold reached 9,000, up 10%, thanks to QSM15 penetration and export growth. Chinese power generation equipment sales dropped 7% in the first quarter, as accelerating data center demand was offset by softening in other markets. India revenues for the first quarter, joint ventures included, were $758 million, up 1% from the first quarter a year ago. Industry truck production fell 7%, and our shipments declined 5%, with the market slowing ahead of April elections. Power generation revenues rose 37% in the first quarter amid continued strong economic activity. Now let me give you an outlook for 2024, along with some comments on individual regions and end markets. For the entire year, our guidance is now excluding Atmus starting on the March 18 separation date, and it also leaves out the first quarter gain tied to the divestiture. When we gave guidance before, Atmus was included for the whole year since that was ahead of the transaction being announced. We're glad to report that our expectations for 2024 are better than what we initially guided in February. Our projection for total company revenue in 2024 stays unchanged at a decline of 2% to 5%, and that means base business revenues will be roughly $1.3 billion higher than what we previously guided, because Atmus is no longer part of upcoming quarters. For heavy-duty trucks in North America, we're raising our 2024 forecast to 255,000 to 275,000 units, up from the earlier guide of 245,000 to 265,000 units, even though we still anticipate a softening in the latter half of the year. For the North America medium-duty truck market, we're keeping our earlier guidance of 140,000 to 150,000 units, which is down 5% to flat versus 2023, and matching what we said before, our engine shipments for pickup trucks in North America should come in at 135,000 to 145,000 in 2024, a decline of 5% to 10% from 2023, as we get ready to launch our model year 2025 in the fourth quarter. In China, we expect total revenue, including joint ventures, to rise 3% in 2024, in line with our prior guidance.
Jen Rumsey
executiveOur outlook for heavy- and medium-duty truck demand is a decline of 5% to growth of 10%, while for the light-duty truck market we anticipate a range between down 5% and up 5%. Replacement demand should serve as the primary catalyst, though a weak economy and possibly softer export needs could dampen that impact. The near-term market share fluctuations I mentioned earlier ought to settle as the rest of the year unfolds. For India, we forecast total revenue, joint ventures included, rising 9% in 2024, mostly fueled by robust power generation and on-highway demand, in line with what we previously guided. Truck industry demand for the year should be flat to up 5%; in global construction, our projection is down 10% to flat versus last year, an improvement from the down 5% to 15% we guided before; we still anticipate soft property investment and decelerating export demand in China. Our key worldwide high-horsepower markets should stay strong through 2024. We are lifting our outlook for global power generation markets to up 10% to 15%, versus roughly 5% to 10% previously, on the back of ongoing growth in data center and mission-critical markets. Mining engine sales should land between down 5% and up 5%, matching our earlier guidance. Though it is a smaller market for us, we still expect oil and gas engine demand to fall 40% to 50% in 2024, largely because of weaker North American demand. On aftermarket, we've kept our guidance at down 5% to up 5% for 2024, since we've moved past the inventory management and destocking that took place across the industry in the second half of 2023. At Accelera, full year sales should come in at $450 million to $500 million, versus $354 million in 2023, consistent with prior guidance. We're expanding electrolyzer manufacturing capacity and capability to fulfill customer orders, and we anticipate continued growth in electrified components. To sum up, following a solid first quarter, we're holding our sales growth outlook for the year at down 2% to 5%, since stronger demand in our base business has offset removing Atmus from our guidance for future quarters. We've also updated our EBITDA forecast to 14.5% to 15.5%, compared with the 14.4% to 15.4% we guided previously, reflecting stronger North America heavy-duty truck and power generation markets, which more than offsets losing Atmus's profitability. Beyond that, we're taking action to cut costs, optimize our business and position Cummins for ongoing success in 2024. We're well positioned to keep investing in the future, delivering new technologies to customers and returning cash to our investors. Over the course of this quarter, we gave back $239 million to shareholders through dividends, which aligns with our long-term objective of returning roughly 50% of operating cash flow to shareholders. Also, we brought down Cummins' total share count by 5.6 million as we finished the Atmus share exchange, and that will show up more completely in the average share count for the second quarter and afterward. I feel both impressed by and thankful for how dedicated our employees and leaders worldwide have been in serving our customers while also producing strong financial results. What we achieved strengthens Cummins' capacity to continue putting money into future growth, delivering sustainable solutions that will safeguard our planet for generations to come, and giving cash back to our shareholders. I'm eager to go deeper into our long-term strategy at our Analyst Day on May 16, and at this point I'll hand things over to Mark.
Mark Smith
executiveThanks, Jen, and hello everybody. We posted strong revenue and profitability for the first quarter, along with positive operating cash flow. Because first quarter results came in strong and our outlook has improved, we have lifted our expectations for the whole of 2024, after making adjustments for the Atmus separation. Revenue in the first quarter totaled $8.4 billion, a decline of 1% versus the same period last year. When Atmus separated in mid-March, that produced roughly a 1% year-over-year drop in sales for Cummins on a consolidated basis. Our underlying revenues rose in North America and Latin America, but weaker demand in China and Europe offset those gains. EBITDA came to $2.6 billion, or 30.6% of sales, for the quarter; in March we finished the tax-free full separation of Atmus, generating a onetime divestiture gain of $1.3 billion, net of transaction costs and other expenses. Results for the first quarter also featured $29 million in restructuring expenses; by comparison, the first quarter of 2023 contained $18 million of costs tied to the Atmus separation. To make operational performance clear and permit comparison with the prior year, I am leaving out the onetime gain, the Atmus separation costs, and the restructuring expenses from what I say next. Atmus financial results through March 18 are part of our first quarter consolidated sales and EBITDA. EBITDA reached $1.3 billion, or 15.5% of sales, for the quarter, versus $1.4 billion, or 16.3% of sales, one year earlier. That lower EBITDA percentage stemmed from investment in new products and capabilities along with reduced sales volumes. Now let's examine things more closely by line item. Gross margin for the quarter came in at $2.1 billion, or 24.5% of sales, versus $2 billion, or 24% even, last year. Favorable pricing and operational improvements, particularly within the Power Systems business, were the main drivers of the better margins. Selling, administrative and research expenses rose by $72 million, reflecting higher research costs as we keep bringing new products and capabilities to market to support future profitable growth, notably development of the HELM product line in the Engine business. Joint venture income of $123 million was up $4 million from the prior year, mostly on higher earnings in the Power Systems segment. Other income totaled $21 million, which is $50 million lower than a year ago. That decline in other income comes from the relatively negative effect of foreign currency revaluation and smaller gains on investments tied to company-owned life insurance versus a year ago. Interest expense was $89 million, $2 million more than the prior year, due to higher outstanding long-term borrowings from the bond issuance we finished in February. The all-in effective tax rate for the first quarter was 8.7%, largely because of the tax-free gain from the Atmus separation. Taking everything into account, net earnings during the quarter came to $2 billion, or $14.03 per diluted share. That figure encompasses the net gain tied to the Atmus separation of $1.3 billion, or $9.08 per diluted share, along with restructuring expenses of $29 million, or $0.15 per share. To echo what Jen noted, the complete effect of the reduced share count resulting from the Atmus separation won't show up until later quarters, because diluted share counts are calculated using a weighted average basis. Operating cash flow on an all-in basis was an inflow of $276 million, versus an inflow of $495 million during last year's first quarter. I'll now offer my thoughts on how each segment performed and on our 2024 guidance. Keep in mind that our earlier 2024 guidance assumed Atmus operations would remain part of our consolidated results across the entire year. Revenue for the Components segment reached $3.3 billion, down 6%, whereas EBITDA, once costs tied to the Atmus separation are excluded, rose from 14.6% of sales to 14.8%, mainly on stronger performance within Cummins <<inaudible>>. Regarding Components, we've revised the segment's guidance after the Atmus separation and now anticipate 2024 revenues falling 9% to 14%, with EBITDA margins between 13.5% and 14.5%. Our newest guidance shows gains in both revenues and EBITDA margins once the Atmus separation is factored out. Turning to the Engine segment, first quarter revenues came in at $2.9 billion, a 2% decline versus a year ago. EBITDA stood at 14.1%, down from 15.3% a year ago, since pricing benefits were canceled out by reduced volumes and greater research costs. For 2024, we now expect Engine business revenues to range from down 5% to flat, which is a 2% improvement at the midpoint versus our prior year projections, driven by a revised outlook for North American truck markets and stronger-than-anticipated demand from construction customers. For 2024, EBITDA is expected to land between 12.7% and 13.7%, a 20 basis point increase at the midpoint thanks to higher volumes. Within the Distribution segment, revenues climbed 5% from a year ago, reaching $2.5 billion. EBITDA as a percent of sales fell to 11.6%, compared with 13.9% of sales a year ago, because aftermarket sales, especially to industrial customers, dropped from the record levels seen a year ago; we anticipate 2024 distribution revenues will be flat to up 5%, with EBITDA margins between 11.5% and 12.5%, which is an increase over the prior guide of 3% for revenues and a modest margin improvement for the full year. Power Systems segment revenues totaled $1.4 billion, up 3%, and EBITDA rose from 16.3% to 17.1% of sales, fueled by higher volumes, especially in power generation markets, better pricing and operational improvements, all of which helped produce a strong trend of improving performance in that segment. For 2024, our expectation for Power Systems revenues is now flat to 5%, which is 3% up at the midpoint, and EBITDA has likewise risen to roughly 16% to 17%, an 80 basis point improvement over what we guided previously. Accelera revenues grew 9%, reaching $93 million, on the strength of more electrolyzer installations. Our EBITDA loss came in at $101 million versus a loss of $94 million during the same period last year, reflecting our ongoing investment in products and capabilities that support future growth; for 2024, guidance remains the same. We anticipate revenues between $450 million and $500 million, with an EBITDA loss between $400 million and $430 million, in line with our earlier guide. As Jen said, because of the strong first quarter performance along with the outlook across our key regions and end markets, we are revising the full year company guidance, and we now project company revenue — consolidated company revenues — to be down 2% to 5%, matching the previous year guidance even with the Atmus separation. Company EBITDA margins are now expected to come in at approximately 14.5% to 15.5%, 10 basis points above prior guidance, and all of this leaves out the net gain tied to the Atmus separation as well as restructuring expenses. We expect our effective tax rate to be 24%, not counting the tax-free gain related to Atmus and other discrete items. Capital investments should fall between $1.2 billion and $1.3 billion, the same as our outlook 3 months ago, since we keep making critical investments in new products and capacity expansion to support future growth. To sum up, we posted solid sales, profitability and positive cash flow in the first quarter. We still anticipate moderation in certain key markets during the second half of 2024, yet we have lifted our expectations for our own performance compared with our prior guide. We took some cost reduction steps in the fourth quarter of 2023 and keep finding ways to streamline our business going forward, which leaves us well positioned to navigate any economic cyclicality and to keep investing and delivering strong financial performance. Our 2024 capital allocation priorities are unchanged; we will reinvest for growth, intend to raise the dividend and reduce debt. Thank you for your interest today, and I look forward to seeing some of you in person in New York at our upcoming Analyst Day; now let me turn it over to Chris.
Chris Clulow
executiveThank you, Mark. <<operator_script>> Operator, we're ready for our first question.
Steve Volkmann
analystIf it's alright, I'd prefer to kick things off by discussing power generation. That segment appears to be performing strongly. There are roughly a couple of items I'd like to learn more about — specifically, where you see yourselves standing when it comes to the data center sector. What portion of your revenue comes from data centers? After that, how do you plan to add capacity across the coming quarters or years, whatever the timeline ends up being? What ought we to keep in mind regarding added capacity and your capacity to expand that segment down the road?
Jen Rumsey
executiveExcellent. Appreciate that, Steve. Per what came through in the guidance, we expect the power gen business to climb 10% to 15% this year, with data center and mission-critical serving as the primary force behind that. Demand from data center clients has been extremely robust, we've held a historically solid standing within that space, and clearly that space keeps expanding; at present we're sold out on our 95-liter through 2025. I also brought up the debut of the new Centum product, which relies on our 50 and 78-liter engine; that gives those customers one more option. Beyond that, naturally, we keep examining 95-liter capacity and how we intend to back what we believe will remain a robust and expanding market.
Steve Volkmann
analystMy apologies — is there a specific plan in place at this point for boosting 95 output, or does that remain something still being worked through?
Jen Rumsey
executiveWe certainly do have specific plans for raising the capacity we currently have for the 95-liter.
Jerry Revich
analystI'm curious — could you walk me through how earnings are likely to be paced across this year? It's encouraging to see guidance move up for both revenue and margins. Mark, would you explain how the quarter actually landed relative to what you had anticipated? Clearly, results came in below the level the consensus had been modeling, so I'd like to understand how things unfolded against your own internal blueprint. Also, how does the ramp you're observing break down, given that you've lifted the outlook?
Mark Smith
executiveSure. To treat everybody fairly — all of you listening and all of us internally — the Atmus spinoff creates a great many variables in motion. From where I sit, on an overall basis, results matched what we had planned, and once you account for Atmus being separated partway through the quarter, we were essentially right on track. As one person noted, margins in the Distribution segment came in somewhat soft — definitely below the prior year; we view them as sitting at the low end of the range during Q1, with improvement expected from this point, mostly because of a decline we've observed in parts sales, especially across industrial off-highway uses. That's the single area of concern; it isn't a fresh development. It has persisted for several months now — 2 quarters — yet apart from that, I'd tell you we're pleased with how gross margin has strengthened versus a year ago. As our announcements and remarks make clear, we keep exploring opportunities to simplify the organization and gain efficiency wherever possible. So on the whole, we landed in line, Jerry, though we do anticipate Distribution's margins specifically strengthening as we move ahead. We had long anticipated — in fact, we thought this might happen somewhat during last year, honestly, and it never played out. Even so, we do anticipate heavy-duty truck output dropping during the third quarter especially, and you've likely picked up the same signal from others in the industry. My sense is the Engine segment along with Components will absorb part of that impact in Q3, and likely Q4, while Power Systems and Distribution ought not to experience meaningful swings in revenue. Truly, the trajectory for Power Systems is upward as we move forward and into the coming year, no question. And Distribution as well. More than half of it, as you're aware, consists of parts and service, which tends to be highly predictable and dependable; we simply experienced a modest mix shift involving fewer parts, and we regard that as short-lived.
Jerry Revich
analystGreat. And I'd like to ask, thinking about it more broadly, about the new rules coming in 2027 that will basically include warranties. What impact does that have on your share of the parts business? Given that warranty change under the new rules, as that field population grows, is there a chance for you all to capture a larger share of the engine parts market, and how big a chance is that?
Jen Rumsey
executiveYeah. As you mentioned, beginning with the EPA 2027 regulations, there's a mandate for a longer emissions warranty on heavy-duty applications — 10 years or 450,000 miles — and the majority of those will reach the mileage limit first. So it's basically the same as the 5-year extended warranty that a number of customers already buy; and that means every customer will require that warranty, which will be built into the price of those engine systems, and naturally, we'll steer customers toward genuine parts during that whole span, which gives us some added upside.
Nicole DeBlase
analystSince these two are connected, I'll ask them at the same time. Both concern Power Systems. In the guidance, it looks like you're building in margins for the whole year that sit below the 1Q figures. This strikes me as a lumpy business, yet looking back at history, a stronger second half is what usually happens; and then a similar point about growth, comparables ease a bit in the back half, but your full year growth outlook amounts to a result smaller than what the first quarter delivered; so please speak to both of those.
Mark Smith
executiveOn revenue, we generally do get some seasonality in the fourth quarter, and a bit across the second half; but the heart of what you're asking is basically correct, Nicole, momentum is positive there; as performance gets better, we've kept lifting the guidance. Depending on how parts move through that business, there's a bit of modest variation. Still, taken as a whole, our message is that we have confidence in this business and in the gains that Jenny Bush and her team have put real effort into across the last 18 months. And with more revenue, we're confident we can convert that into greater earnings; but nothing is dramatically or structurally different. Looking ahead, we anticipate steady improvement over time.
David Raso
analystRegarding the meeting on May 16, could you share what we ought to anticipate from it? My focus is especially on margins. I believe folks are simply attempting to understand the operating leverage within the company over these past couple of years, and perhaps the margins weren't exactly what people had anticipated. Even with today's guidance, the uptick in power gen margin was good to see. Yet on the whole, the comparative gain in earnings versus the gain implied by the sales guidance—that still isn't all that impressive. So I'm merely wondering whether you might set the stage a bit regarding what we should look for on May 16. I don't want to spoil what the meeting will reveal, just to establish a baseline...
Jen Rumsey
executiveRight. Clearly, I'm not going to reveal the specifics of what we'll present, though you can definitely count on hearing us discuss the company's overall strategy, where we believe we stand relative to certain 2030 goals that we laid out during our previous Analyst Day, and also addressing revenue and margin projections along with what will drive those within that framework; so David, you will certainly hear additional details on that at our Analyst Day.
David Raso
analystAll right. One more quick thing. JV income rose in Q1 compared to a year earlier, yet your full-year outlook still points lower. I just want to confirm the reason for that decline. Is it that China isn't sustaining some of those gains? Or is it something else within royalty income? I realize that line within JV income can be quite uneven. Any clarity you can give would be helpful.
Mark Smith
executiveYes. I believe you've got it right, David. Two factors really drive the operating performance, which typically tracks at or above the market rate; beyond that, tech fees flow from the joint venture to Cummins consolidated results in a very uneven way whenever new products launch, and last year saw an especially robust stretch of launches, <<inaudible>> certain development milestones; as a result, tech fees will decline, mainly in the Engine business, and that more than cancels out whatever market growth we assume. That said, there were some truck OEM build increases in Q1, though those rested more on expectations or hopes regarding what lies ahead, and we still need clearer signs of momentum since China, as you're aware, is the largest contributor to earnings there. But the real story is lower tech fees, which were sizable a year ago — somewhat in components, but predominantly in the Engine business.
Chris Clulow
executiveJust a brief addition on that point, David. Plus, our plan already accounts for the battery joint venture going live at some point later in this year, once approval comes through. So there will be certain losses tied to that too, as it returns to operation during the second half.
Mark Smith
executiveThat's part of Accelera, right?
Jen Rumsey
executiveCorrect, that's what we anticipate. The battery joint venture has received its last regulatory clearance. So we expect it will begin contributing during the second quarter.
Angel Castillo Malpica
analystTurning back to the Power Generation segment. I believe your guidance went up to 10% to 15%, compared with 5% to 10% before. Could you discuss how price and volume combine in that figure relative to earlier expectations? Is it a case of achieving improved output relative to what you had expected? Or is pricing climbing, and what exactly are you observing on that front?
Jen Rumsey
executiveYes. A few dynamics in that market are worth remembering. First, as I said, the order board extends quite far out. So certain efforts to enhance price cost in reaction to inflation, along with business performance, need time before they fully materialize. We are therefore beginning to witness greater pricing leverage entering that market. Beyond that, we keep pushing, naturally, for gains in the Power Systems business plus efficiency across manufacturing and supply chain. I also mentioned the introduction of new products, which we engineered so they could be sold at somewhat better margins; consequently, some beneficial dynamics have been occurring in the power gen market relative to past periods, when our margin performance would have sat at a different level.
Angel Castillo Malpica
analystThat's quite useful. Regarding new offerings, you mentioned the X15 diesel engine you're launching, which is arriving somewhat before the emissions rules take effect. Could you share a bit more about what you anticipate regarding boundaries on pricing and possible margin gains? I'm aware you generally go through emission cycles when there's a chance to reset and recoup some of that margin. So as we consider — perhaps not tied to any particular year — but those initiatives, or those offerings, and what they mean for your pricing and margins once they're introduced?
Jen Rumsey
executiveYeah. So absolutely, as with previous emissions rules, we aim to provide added value to the customer, with margin gains tied to that. With the 27 EPA regulations, we've already discussed the emissions warranty factor. There will also be extra content, especially the after-treatment system needed to satisfy those rules, which carries significant additional content. And then there's the warranty factor that always comes with launching new products, where we start out — at least initially — accruing at a higher rate from a warranty standpoint until the product is in the market and we've proven warranty performance; so those are the shifting pieces you'll notice. We haven't yet provided specific figures on what we anticipate regarding exact pricing for those products.
Tami Zakaria
analystI'd like to get a clearer picture of that margin guidance. When you strip out Atmus — which, I think, was a drag, and carving it out is turning into a drag — you still lifted the outlook for the entire year by roughly 10 basis points, on the assumption of stronger margins in Engines and Power Systems. So I just want to grasp what's actually behind that upgraded margin forecast. Is it greater volumes? Is it additional cost savings? Is it more price versus cost? Any detail on that would be useful.
Mark Smith
executiveThat's a fair question. You're correct that separating Atmus is somewhat dilutive to margins. So yes, it's good that you noticed that. The main factors are really volume plus a bit of cost-cutting activity; those 2 are the chief drivers.
Rob Wertheimer
analystWhat I want to ask about is how you're set up competitively for the 2027 EPA, based on what's visible right now. We hear a lot of questions about whether there's a prebuy tied to the size of the cost increase, and possibly the warranty ought to be taken out of that — I'm not certain. Beyond that, there could be less obvious factors that you'd grasp far better than the rest of us do, regarding the ways those standards might be satisfied, like whether extra natural gas capability, an area where you perform quite well, can counterbalance other emissions, and similar considerations. So that's the broad question. How much of a price increase, is there share gain, and are there any nuances in your mix or your early readiness that give you an edge during the 2027 transition?
Jen Rumsey
executiveYes. Great. Thanks for the question. And as we've discussed, we're putting money into the new HELM engine platforms; our scale puts us in a unique position to keep funding what will be market-leading engine solutions capable of satisfying those upcoming regulations. So we anticipate that this gives us an edge as those rules take effect. We believe a dynamic will unfold during the '25 and '26 window, as end customers look ahead to a significant regulatory shift and consider its implications for them. That, we expect, will push some activity past what the U.S. truck market normally sees in a cycle. Then, heading into 2017, there'll be a stretch of adoption, though we believe our positioning is strong. Clearly, our medium duty standing has kept getting stronger, and later this year we'll bring to market a next-generation 15-liter natural gas offering that draws considerable interest from customers with sustainability goals, who view it as the optimal path — the most economical and dependable one — for achieving those goals, and we'll also have a new high-efficiency 15-liter platform plus a 10-liter platform; so our position with these products has us excited, and we're squarely concentrated on executing their development and getting them launched.
Noah Kaye
analystLet's stay on EPA 2027 for a moment. If the finalized rules keep giving favorable credit to hydrogen trucks, and considering what you already offer in that area, I'm curious whether you've begun to notice a bigger increase in demand for hydrogen fuel cell, or whether the majority of Accelera inquiries right now are mostly for both.
Jen Rumsey
executiveYeah. When you look past even '27 toward the Phase 3 greenhouse gas regulation EPA announced, that one will truly begin shaping our industry as we move into 2030 and later. That rule brought us no big surprises, yet the level of ambition and the assumptions regarding 0 emissions vehicle penetration are genuinely unprecedented; because of that, government and industry will need to collaborate very closely if it's going to succeed. So, to what you asked, there are a few elements of the regulation we're happy about. First, it genuinely acknowledges hydrogen engines as a zero-emission answer. We therefore think that opens room for hydrogen fueled engines, while hydrogen fuel cells remain a solid option over the long run, though adoption there will probably take a while, I'd say. Beyond that, EPA also pledged to help streamline certification for hybrid powertrains. In our view, hybrid engines could be appealing since infrastructure availability will pose difficulties. That's one more item we're watching carefully; so engine-based options still exist. Yes, as I mentioned, we are currently seeing a rise in battery electric powertrains, and naturally, electrolyzers and fuel cells remain at a fairly modest level.
Noah Kaye
analystGot it, that clears things up. You mentioned the joint venture has now received its regulatory green light, so could you take us through the general roadmap for how the gigafactory outlay should play out over the coming two years or so?
Jen Rumsey
executiveAnd also, what steps might you be taking at this point to secure supply and demand for that plant, or at least your <<inaudible>> Jennifer Rumsey: Sure. What I'd say is that the partners had already been working together prior to obtaining that last regulatory approval, and we shared earlier this year that a site had been chosen. Alright, so what we're doing is preparing a location in Mississippi, right near Memphis, to basically evaluate things and genuinely begin the groundwork for the supply chain and constructing the facility. Since we've now secured regulatory approval, our expectation is that we can wrap up and formalize the entity during this quarter. After that, investment will come in stages as we put up the plant and move toward beginning production in 2027. We're also, naturally, dividing the cost of that 21-gigawatt hour facility among the partners, and the way it's built lets us bring new lines online in stages and increase both plant capacity and output as the industry evolves. Our confidence about where we stand in the market remains strong, especially alongside an LFP cell built specifically for the commercial vehicle segment, and we can tap some of the incentive funding out there to support uptake in that commercial vehicle market.
Jamie Cook
analystMy apologies — I'm juggling roughly seven calls right now. Hopefully nobody has raised this yet, but Mark, this one's directed at you, I believe, given that your team's Analyst Day is scheduled for later this month. Looking at Cummins, I find myself thinking that maybe there's a cost narrative at play, you've got share gains that ought to be providing some lift, possibly along with reduced spending on Accelera. What I'm curious about is whether, when you consider margins over the medium term, you see room to make incremental margins structurally better? Or when you look at the coming couple of years, is it instead about pursuing these moves in order to reach the incremental margin targets Cummins has historically aimed for? Then my follow-up would be — and I apologize if this has already been covered. Could you share what visibility looks like for you regarding backlog throughout your portfolio, especially on the engine side as well as the Power Systems side.
Mark Smith
executiveSo I caught that — we're going to tackle incremental margins explicitly in May. Nobody will miss it, for everyone asking, it's very fitting, and clearly it's at the center of our thinking — or foremost in our minds. So you'll be hearing about it extremely soon, I suppose.
Jen Rumsey
executiveAbsolutely, and Jamie, it's great to have you back with us. Naturally, we're putting in the work, and you can observe how Meritor is getting better as we integrate it, while Accelera is scaling up. On revenue, we'll get into more detail later. Regarding what we're seeing in the market, demand in heavy-duty remains consistently strong thanks to the substantial backlogs that have accumulated, and the vocational market continues to show plenty of vigor. Truckload has been struggling for quite a while now. As a result, we continue to expect — and our OEM customers keep telling us — that there will be some softening in the second half, and that assumption is reflected in our updated guidance, which is lower, though not lowered as much as the prior guidance. On power gen, as I mentioned before, we've completely sold out the 95-liter through '25. We're evaluating capacity there and ways to increase it, and with the new Centum launch, we'll also be able to offer some of our other engines to that market. So it's quite — we feel really positive about power gen, and we feel good about medium-duty and vocational on-highway. The real issue is the truckload, fleet customers in the heavy-duty market. That's the segment we're monitoring carefully, and we still expect it will weaken before we move into the next upswing in their cycle.
Mark Smith
executiveRight. And what you may have picked up on before was certain industry consensus taking shape regarding '25 and '26, prior to 2027. So the assumption we're working from at present is that this won't be as severe or as steep as a typical cyclical downturn. That's a supposition rather than a certainty, but it's what we've built into our guidance for this year. China is the one where we're still — we're awaiting stronger momentum, most likely.
Jeff Kauffman
analystI'm simply wondering what you think. It seems the '24 decline on the heavy-duty engine side that many of us worried about won't wind up being as severe as we first thought. ACT Research, I'm aware, has raised its forecast. You brought up some softness starting in 3Q, but should we interpret that as borrowing from what would otherwise have been a prebuy in '26, assuming '24 turns out stronger? Or would you say those 2 things aren't connected?
Jen Rumsey
executiveWhether they're connected, I can't say. What I mean is, we're closely monitoring production rates, backlogs, and certain spot rate dynamics in the market; and looking at some freight carriers, they've faced difficulties for the last 18 months now. That's what shapes our outlook, though that's a fair point. What I mean is we — given the — it's genuinely the supply chain situation that's made this cycle so unusual and even impossible to predict. It definitely lasted longer and held up better than our forecast anticipated, and we still anticipate some softening in the second half.
Jeff Kauffman
analystWell, congratulations.
Chad Dillard
analystThis is Federico filling in for Chad. I'd like to dig deeper into R&D intensity and how we should think about it over the medium term.
Chris Clulow
executiveSorry, could you say that again? I don't believe we caught the first part.
Analyst
analystSorry about that; we want to dig deeper into R&D intensity and how we should be thinking about it over the medium term.
Jen Rumsey
executiveYes. So, as you're aware, we have increased what we're putting into R&D. We called that out in our remarks, since we're investing, especially in this new fuel-agnostic engine platform. So our R&D sits at a higher level because of those investments in the new platform; those products are starting to launch and truly will roll out across the '26 and '27 time period. And then, naturally, we're in a stretch of investment in the Accelera business as we push to bring new products to market and scale up revenue there too.
Chris Clulow
executiveWe appreciate everyone joining us today; that brings our teleconference to a close. We truly value the interest shown; and as usual, the Investor Relations team will be on hand to answer questions following the call. Enjoy the rest of your day.
Jen Rumsey
executiveLook forward to seeing many of you in person in a couple of weeks.
Operator
operatorThat wraps up the call for today. At this point, feel free to drop off your lines. We appreciate you joining us.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Cummins Inc. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.
Get the API View API docs →This call discussed
For developers and AI pipelines
Programmatic access to Cummins Inc. earnings transcripts and 132,000+ others is available through the
EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments,
full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.
More tools for stock research
OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Cummins Inc. or any ticker on your watchlist.
StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.