Cummins Inc. (CMI) Earnings Call Transcript & Summary
August 1, 2024
Earnings Call Speaker Segments
Chris Clulow
executiveThank you so much. Good morning to all of you, and we're glad you could join today's call as we walk through Cummins' second-quarter 2024 results. Joining me on this call are Jennifer Rumsey, who serves as our Chair and Chief Executive Officer, along with Mark Smith, our Chief Financial Officer. Once the teleconference wraps up, all of us will be here to take your questions. A quick note before we begin: a portion of what you hear or receive today falls under the category of forward-looking statements, as defined by the Securities and Exchange Act of 1934. These statements convey our forecasts, expectations, hopes, beliefs, and intentions concerning future strategies. A variety of risks and uncertainties could cause our actual future results to differ materially from what those forward-looking statements project. You can find additional details about these risks and uncertainties in the forward-looking disclosure statement included in the slide deck, as well as in our filings with the Securities and Exchange Commission — in particular, the risk factors section of our most recently filed annual report on Form 10-K, together with any quarterly reports on Form 10-Q filed afterward. Throughout this call, we'll touch on certain non-GAAP financial measures, and we'll point you to our website, where you can find the reconciliation of those measures to GAAP financial measures. Our press release, which includes a copy of the financial statements, along with a copy of today's webcast presentation, can be found on our website in the Investor Relations section at cummins.com. At this point, I'll hand things over to our Chair and CEO, Jennifer Rumsey, to get us started.
Jennifer Rumsey
executiveThank you, Chris, and good morning. It's a pleasure to join everyone today as I mark 2 years since stepping into the CEO role at Cummins. I'll begin by going over the financial results for our second quarter, and after that I'll walk through sales and end market trends region by region. I'll wrap up by talking about what we expect for 2024. After that, Mark will walk you through additional specifics on how we performed in the second quarter and what we're projecting for the full year. Before diving into how we did, I'd like to pause and call out a handful of significant wins from the second quarter. At our Analyst Day held recently, I mentioned that we're lifting our longer-term financial goals, reflecting a portfolio that keeps getting stronger and our ongoing work to carry out the Destination Zero strategy. The robust relationships we maintain with customers and stakeholders are essential to pushing our strategy and growth trajectory forward, and during this quarter we made those relationships even stronger. In May, together with Isuzu Motors Limited, we unveiled a brand-new 6.7-liter engine built for Isuzu's medium-duty truck range. This engine is going to power on-highway truck applications for the Japan market and will become available for Asia-Pacific markets as well as other global markets later this year. We additionally revealed plans to bring out a battery-electric powertrain for Isuzu's F-Series in North America. That medium-duty truck should become available in 2026 and will feature Accelera's next-generation lithium iron phosphate, or LFP, battery technology. These developments represent a major milestone for Cummins and Isuzu alike, since Cummins is entering the Japan on-highway market for the very first time in our history. We take pride in the partnership our 2 companies have established, and I'm eager to harness our combined strength and scale to generate profitable growth for both partners; in addition, during this quarter we moved our partnership with Daimler Truck and PACCAR further along by finishing the creation of our joint venture, now called Amplify Cell Technologies, aimed at localizing battery cell production within the battery supply chain in the United States; this involved appointing the Chief Executive Officer of the joint venture and holding a groundbreaking at a new manufacturing plant in Marshall County, Mississippi. Amplify Cell Technologies will allow Accelera by Cummins and our partners to push forward battery cells centered on commercial and industrial applications in North America and to meet our customers' changing needs. This marks a meaningful step forward as we keep leading our industry into the next era of smarter, cleaner power. In July, Accelera received $75 million from the Department of Energy to convert roughly 360,000 sq ft of existing manufacturing space at our Columbus, Indiana, engine plant for zero-emissions components, including battery packs and electric powertrain systems. That $75 million grant is the biggest federal grant ever given solely to Cummins and forms part of the appropriations tied to the Inflation Reduction Act. The Columbus Engine Plant also serves as the location where we produce blocks and heads for our present and future engine-based solutions, which further demonstrates our Destination Zero strategy being put into action. Now, I'll discuss how the company performed overall in Q2 of 2024 and go over a few of our key markets, beginning with North America, then moving to our biggest international markets. Demand for what we make stayed robust throughout many of our major markets and regions, producing record revenues during the second quarter of 2024. Sales in that quarter reached $8.8 billion, which is 2% higher than the second quarter of 2023, fueled by sustained strong demand and better pricing. EBITDA came in at $1.35 billion, or 15.3%, versus $1.3 billion, or 15.1%, during the same period a year earlier. Results for the second quarter of 2023 had included $23 million of costs tied to the Atmus separation. EBITDA and gross margin dollars both rose relative to the second quarter of 2023, since gains from greater volume and pricing outweighed increases in supply chain costs and made up for the Atmus separation's impact. Our North America revenues during the second quarter climbed 4% to $5.5 billion, powered by robust demand in our core markets, which more than compensated for the effect of the Atmus separation. Heavy-duty truck industry production during the second quarter totaled 75,000 units, a 1% rise over 2023 levels, and our heavy-duty unit sales reached 31,000, up 7% versus a year earlier. The second quarter set a record for production volume of our heavy-duty engines at the Jamestown Engine Plant. Medium-duty truck industry production came to 41,000 units during the second quarter of 2024, a 4% gain over 2023 levels, while our unit sales hit 38,000, up 13%, also surpassing the market's growth. We shipped 41,000 engines to Stellantis for installation in Ram pickups during the second quarter of 2024, an 8% increase over 2023. North America power generation revenues rose 23%, propelled by ongoing robust data center and mission-critical power demand. The strong power generation results in North America and around the world helped us deliver record sales and profitability in the Power Systems segment. Our international revenues during the second quarter fell 2% relative to last year. Second quarter revenues in China, including joint venture, totaled $1.6 billion, a 2% decline, as weaker domestic volumes were partly offset by greater data center demand. Medium and heavy-duty truck industry demand in China reached 270,000 units, a 3% drop from last year. Demand in the China truck market keeps running at low levels, with increased orders for natural gas engines and robust exports offsetting soft domestic diesel demand; in China's light-duty markets, we rose 4% over 2023 levels to 480,000 units, while our units sold, including joint ventures, came to 33,000, an 18% increase. Excavator industry demand in China during the second quarter was 53,000 units, a 4% rise over 2023 levels. We moved 10,000 units, which is 19% more than before, thanks to QSM15 gaining traction with both new and existing OEM partners plus growth in exports. In China, power generation equipment sales rose 36% during the second quarter, mainly because demand kept accelerating in data centers. That contributed to strong financial results at our Cummins Chongqing joint venture, which sits inside our Power Systems business. India's second quarter revenues, joint venture included, came to $649 million, down 10% versus the same quarter last year. Industry truck production was up 11%, and our shipments rose 5%. Power generation revenues fell 17% year-on-year, since the second quarter of 2023 gained from pre-buy demand before emissions regulation changes took effect. Now I'll walk through our outlook for 2024, with a few remarks on specific regions and end markets. We've lifted our 2024 expectations while still expecting the second half to come in weaker than the first half, largely because of the North America heavy-duty truck market. Our revenue guidance is now moving to down 3% to flat, up from the prior guidance of down 2% to down 5%. We're also raising our EBITDA guide to 15%-15.5%, versus the earlier guide of 14.5%-15.5%. We now anticipate greater revenue in our engine, Power Systems, and Distribution segments, which offsets somewhat lower revenue expectations for the Accelera business.
Jennifer Rumsey
executiveWe're also expecting better profitability in our engine and Power Systems businesses, and that's what's driving the bulk of the EBITDA improvement. For heavy-duty trucks in North America, our forecast stays at 255,000 to 275,000 units for 2024, since we continue to anticipate a softer second half. When it comes to the North America medium-duty truck market, we're lifting our forecast to 150,000 to 160,000 units, which is flat to up 5% versus 2023. That's 10,000 units above what we previously guided, reflecting the ongoing benefit from a higher backlog and strong vocational orders. As with our earlier guidance, engine shipments for pickup trucks in North America should come in at 135,000 to 145,000 in 2024, and a planned model year changeover will probably cause a short-lived production dip in the second half. For China, we forecast total revenue, joint ventures included, rising 3% in 2024, in line with what we said before. In India, total revenue including joint ventures should rise 8% in 2024, mainly on robust power generation and on-highway demand. Industry demand for trucks this year should be flat to up 5%. Global construction is projected at down 10% to flat year-over-year, matching our earlier guidance. We still anticipate somewhat weaker property investment and moderating export demand in China. Our outlook for the global power generation market is being raised to up 15%-20%, versus the up 10%-15% we previously guided, on continued growth in the data center and mission-critical markets. Mining engine sales should be down 5% to up 5%, unchanged from prior guidance. On aftermarket, guidance has been improved to flat to up 5% for 2024, lifting the low end of our earlier decline of 5%, as demand has held up better than anticipated in on- and off-highway markets. At Accelera, full-year sales should land at $400 million-$450 million, which is $50 million less than the prior guide. As we said at our Analyst Day, the energy transition is moving ahead more slowly, which affects our e-mobility and electrolyzer revenues. To sum up, after a strong first half, we're raising sales guidance to down 3% to flat and lifting EBITDA guidance to 15%-15.5%. Though we expect the North America heavy-duty market to soften in the second half, demand across several core markets is still solid. If economic momentum decelerates, Cummins is well positioned to continue investing in future growth, deliver new technologies to customers, and return cash to shareholders. In July, we announced an 8.3% bump in the quarterly dividend, from $1.68-$1.82 per share, marking the 15th consecutive year of dividend increases. During the quarter, we returned $230 million to shareholders through dividends, in line with our long-term plan of returning roughly 50% of operating cash flow to shareholders. A reduced count of shares outstanding gave our diluted earnings per share a lift, since the effect of the Atmus split came through more completely in the weighted average share count during the second quarter. To sum up, the first half of 2024 brought us strong performance, powered by record demand for Cummins products across our core markets; watching our business expand alongside long-established customers in existing markets, and seeing newer partnerships create additional opportunities in markets Cummins had not previously tapped, is truly exciting. My thanks go out to our employees, who keep executing our strategy and delivering solutions that help our customers win wherever they operate. What our results show is our commitment to strong financial performance while simultaneously investing in future growth, bringing sustainable solutions to decarbonize our industry, and returning cash to our shareholders. As was covered at Analyst Day, our future holds plenty to be excited about. With that, I'll hand things over to Mark.
Mark Smith
executiveThanks, Jen, and good morning, everyone. We delivered solid results in Q2. With those strong results and an improved outlook, we've raised the midpoint of our full-year 2024 expectations. Second-quarter revenue came in at $8.8 billion, up 2% from the prior-year period, as organic growth more than offset the sales decrease from the Atmus spinoff. Sales in North America increased 4%, while revenues outside North America declined 2%. Currency movements reduced sales by 1%. EBITDA was $1.35 billion, or 15.3% of sales for the quarter, compared with $1.3 billion, or 15.1%, in the same period last year. The prior-year figures included $23 million of costs related to the Atmus separation. Higher volumes and better pricing, along with the absence of separation costs, drove most of the profitability improvement. Let me now take you through the line items in more detail. Gross margin for the quarter was $2.19 billion, or 24.9% of sales, versus $2.15 billion, also 24.9%, last year. Margins were flat mainly due to favorable pricing and operational improvements, which were offset by the removal of Atmus and higher compensation expenses. Selling, administrative, and research costs were $1.21 billion, or 13.7% of sales, compared with $1.26 billion, or 14.6%, a year ago. Joint venture income of $103 million was down $30 million year over year, primarily on lower technology fees and a weak domestic truck market in China. Other income was negative $3 million, a decline of $27 million from last year. Interest expense was $109 million, up $10 million from the prior year, largely due to higher weighted average interest rates. The all-in effective tax rate for the quarter was 23%, and that included favorable discrete tax items of $9.07 per diluted share. All-in net earnings for the quarter were $726 million, or $5.26 per diluted share, compared with $720 million, or $5.05 per diluted share, in Q2 of last year. The second quarter reflected a lower weighted average share count resulting from the tax-free share exchange that was the final step in the Atmus separation, which concluded in the first quarter. All-in operating cash flow was an outflow of $851 million, versus an inflow of $483 million in last year's second quarter, and that decline was primarily due to the $1.9 billion payment required under the settlement agreements with regulatory agencies that we previously disclosed. Excluding the settlement, operating cash flow was an inflow of $1.1 billion, more than double the cash generated in the second quarter a year ago. I'll now cover segment results and our 2024 guidance. As a reminder, the 2024 guidance includes Atmus operations in our consolidated results through the full separation that occurred on March 18th. In our Components segment, revenue came in at $3 billion, which represents a 13% drop compared with the previous year. EBITDA went from 14.2% of sales down to 13.6%, and the Atmus separation was the primary driver behind both the sales and EBITDA figures. When we look at components, our projection for 2024 revenue anticipates a 9% decrease, bringing it to $14.8 billion, and that's consistent with our earlier communication. On EBITDA margins, we're expecting something in the range of 13.7% to 14.2% — we've narrowed that range from the prior guidance of 13.5%-14.5%. Now for the Engine segment, Q2 revenue reached a record $3.2 billion, which is 5% higher than the equivalent quarter a year ago. EBITDA landed at 14.1%, a touch under the 14.2% we reported a year earlier. Benefits from pricing and record on-highway volumes in North America were counterbalanced by higher research expenditures and lower joint venture income, primarily from China. For 2024, we now anticipate — sorry — we now expect the engine business to see revenues somewhere between a 3% decline and a 2% gain, which is 2% above the earlier midpoint, reflecting a revised view of the North American medium-duty truck market. Full-year Engine EBITDA should come in at 13.7%-14.2%, which is up 75 basis points at the midpoint compared with our previous projections, driven by stronger volumes and ongoing operational efficiencies. Shifting to Distribution, revenues climbed 9% year over year to a record $2.8 billion. EBITDA as a percentage of sales dropped to 11.1% from 11.5% a year ago, mostly because of higher compensation expenses and a bigger mix of power generation sales — beneficial for the company overall, but dilutive to Distribution segment margins. We now project 2024 distribution revenues to increase 5%-10%, which is 5% above the prior midpoint, mainly due to stronger power generation markets. Our EBITDA margin outlook has been adjusted to 11.3%-11.8%, a slight decrease from the previous 11.5%-12.5% range. The Power Systems segment delivered a new quarterly record. Revenues hit $1.6 billion, up 9%, and EBITDA rose from 13.8% to 18.9%, driven by higher volumes — particularly in power generation markets — improved pricing, and other operational gains and cost reductions. For 2024, we expect Power Systems revenues to grow 3%-8%, which is 3% above the prior guide. EBITDA is now projected at approximately 17.5%-18%, versus the earlier 16%-17% forecast. Accelera revenues surged 31% to $111 million, aided by additional electrolyzer installations. Our EBITDA loss was $117 million, compared with a $114 million EBITDA loss last year, as we continue investing in products and capabilities for the parts of the business where we see strong growth ahead, while cutting costs where we believe growth prospects have been pushed further out. For 2024, Accelera revenues should land in the $400 million-$450 million range, which is $50 million below our previous guide. Net losses are still expected in the $400 million-$430 million range. My apologies. As Jen noted, with the strong second-quarter performance and the updated outlook for our key region and markets, we've lifted our full-year company guidance. This translates to $0.07 per diluted share, or $9 million. Looking ahead now, we see revenue either falling 3% or holding steady — better than the down 2% to down 5% range we gave you before. On EBITDA margins, we're now expecting something like 15%-15.5%, so that band is narrower and the midpoint sits 25 basis points higher than what we told you earlier. When we look at 2024, our effective tax rate should come in around 24%, and that excludes the tax-free gain related to Atmus plus other discrete items. Capital spending ought to be somewhere between $1.2 billion and $1.3 billion, unchanged from what we shared three months back, because we continue putting money into the key investments — new products and added capacity — that support growth later on. So to wrap up, Q2 of 2024 delivered record sales and healthy profitability for us. We do expect some softening in certain key markets in the back half, especially North American heavy-duty truck, something we also called out at our recent Analyst Day. Back in Q4 of 2023 and Q1 of 2024, we took steps aimed at reducing costs. We continue to uncover ways to run the business more efficiently going forward, which means we're positioned well to weather any economic cyclicality that shows up; our financial results remain strong, and we're raising our performance cycle over cycle while still investing for future growth. On capital allocation, our priorities for this year haven't changed: reinvest for growth, increase the dividend, and reduce debt. Also worth noting, we delivered $0.07 per diluted share, or $9 million. Overall, a very strong quarter. Thanks for your time today. With that, I'll turn it back over to Chris.
Chris Clulow
executiveThanks, Mark. To be fair to everyone else on this call, I'd like to ask you to keep it to one question plus a related follow-up. If something else comes to mind, please get back in the queue. Operator, let's take our first question.
Steven Fisher
analystRegarding China truck, your expectations haven't been revised at all. I'm curious about how you're viewing some of those fresh incentives the government introduced over there to boost sales during the back half of the year. Could that be a spot where your forecast is being a bit conservative, or do you figure it might not amount to anything significant in that market?
Chris Clulow
executiveYes. Appreciate that inquiry, Steven. Morning to you. Over the past 18 to 24 months, China's results and economic climate have come in quite steady, and there were earlier signals about steps the government might pursue, yet none of those has actually produced any significant shift within our sector. So honestly, natural gas product along with exports continues to perform strongly, while the domestic diesel market stays comparatively soft, and we don't expect that picture to shift anytime soon. Thanks.
Jamie Cook
analystHello, and congratulations on a solid, uncomplicated quarter, I suppose. Thank you. I have a couple of inquiries. First, Mark, the margins in Power Systems look really impressive given the rather subdued expectation for sales growth in 2024. Could you walk us through what's driving that, what portion is structural, and whether you see room for margins to rise beyond these levels in later years, since you're already projecting a margin near 18% for this year? Then my second question is for Jen. I realize you'd prefer not to provide guidance for 2025, but how are you evaluating the markets, particularly regarding the U.S., with the election coming up and the Chevron decision being overturned? Are you taking a more cautious stance on a possible prebuy? Do you expect that it gets delayed? I suppose the two favorable factors would be China recovering and then Power Systems. So I'm curious whether, in the end, the potential for incremental margins is stronger in 2025 under those scenarios, assuming a subdued 2025 prebuy alongside an improved mix from Power Systems in China. Thanks.
Mark Smith
executiveAll right, those are good questions. We'll do our best to squeeze in responses within the time we've got. Regarding Power Systems, the margins really break down into three components. And addressing the final portion of what you asked: yes, we anticipate additional gains are still ahead; the group in that area is performing tremendously, beginning with certain cost cuts, reordering priorities regarding where money goes and where it goes less, a robust pricing backdrop within the power system business. And then, certainly, further work remains around operational efficiency. So in terms of what has been fueling these results, there are genuinely multiple avenues, and even more is on the way; so our excitement is very high. With luck, you picked up on the assurance expressed by Jen Bush and her colleagues during the Analyst Day and their ongoing delivery here in Q2; and yes, we hold a favorable view of that segment. Those are essentially the primary factors behind Power Systems. Right; and concerning the market outlook, here's what I'd say: within the power gen market, the ongoing expansion we're witnessing, especially in the data center space, doesn't appear to me like it will slow down at any point in the near future. Plus, demand is robust and our backlog is elevated. And as you're aware, we mentioned back in May that we'd be making certain capacity investments to capitalize on that expanding market; when it comes to U.S. on-highway, the medium-duty truck segment has remained solid.
Jennifer Rumsey
executiveOur backlog and demand look robust, and we don't expect that to ease anytime soon. On the heavy-duty side, build rates are declining — we're projecting roughly a 10% drop in Q3 and 20% for the entire second half. The real question is what next year brings given the wider economic picture, since spot rates have settled and truck prices sit below where they've traditionally been, which has cut into demand from some of our customers. How all of that interacts with a prebuy, plus the Supreme Court's reversal of Chevron deference — we don't foresee regulations having an impact in the near term. In our view, the 2027 rules will keep progressing. The larger question, though, is probably what happens with Phase 3 greenhouse gas around 2030. We still expect a certain amount of prebuy before that emissions transition. Yet the industry has shown there are capacity limits, as we've witnessed over the past couple of years. So exactly how big that prebuy turns out to be remains, I think, an open question. Even so, we're getting ready for solid demand as the 2027 regulatory change arrives.
Stephen Volkmann
executiveAlright, thanks so much, everyone. Mark, I believe you said — perhaps both of you did — that pricing came in positive. From what I can tell, it was positive in truck, and it also sounds like it was positive in power gen. Could you expand on that for us a bit more? I mean, what kind of pricing are you actually observing, and how should we be thinking about that for the remainder of the year? Yeah. Those are excellent questions, Steve.
Mark Smith
executiveIf you look at the whole company, the figure sits at 2.5% for the year, though it swings quite a bit depending on which segment you're in. And honestly, that number has stayed put. You don't see it moving in what we reported. Still, it's clearly played a big role in what Power Systems delivered. I also don't expect much movement there. That gain versus the prior year ought to largely persist through every quarter.
Jerry Revich
analystYes. Hello there. Good morning to all. Jennifer, congratulations on your anniversary. I’d like to ask about medium-duty engine platforms around the world, okay? You people are taking over Daimler’s business. And now you’re also taking on Isuzu’s business in Japan. Could you broaden on that and tell us how many additional medium-duty engines you expect to deliver worldwide in 2026 compared with, say, let’s call it 2 or 3 years back, because of when this transition is happening? Also, if you could say something about Japan being a difficult market for bringing in products because of the currency. Could you explain how you are managing to do that in a way that makes economic sense? Thank you.
Jennifer Rumsey
executiveYes. Of course. So this direction has been visible, along with certain announcements we’ve issued during the past few years, and it is now unfolding as regulations begin to take effect. So we are witnessing rising medium-duty need in the U.S., naturally, as Daimler moves over to us, and Isuzu, plus additional customers such as Hino here in the U.S. So our position in the medium-duty market here is expanding; we have now introduced the medium-duty product in India together with Daimler. So we will begin to see some volume there. What drives their approach is really regulatory change. So as regulatory change appears in Europe and Brazil, we will keep increasing volume with Daimler; regarding the Isuzu business, we are producing that new B6.7 at their Tochigi Plant in Japan. So that engine is not being imported by us. It is being built in the market. This is the first time we have been in the on-highway market. We have been in the off-highway market there, naturally, for many years; and so we will see some gradual volume increase there in Japan; and then, as I mentioned, they will subsequently introduce that truck into other Asia-Pacific and global markets later this year. So what you’ll see is simply steady growth, I would say, from Cummins year over year in the medium-duty space as these new customer partnerships expand and emissions regulations change and add. And India and China. India and Brazil to the later 2027. 2027 through 2029. Yeah.
Angel Castillo
analystHello, and thank you for the question. Congratulations on a solid quarter. I was hoping we might dig a bit deeper into the Engine segment. You lifted the margin outlook for that business, and you've been discussing medium-duty. Given that the second half is anticipated to slow down on the heavy-duty side, could you walk us through the elements behind the margin gain there, and help us sort of measure what's really fueling that, along with how you're viewing margin gains for 2025?
Jennifer Rumsey
executiveYes. There is a bit of assistance coming our way. Our projection for parts has gotten better, and that clearly benefits things on the whole. Since the latter portion of—well, the fourth quarter of last year, continuing through the fourth quarter and on into the first quarter of this year—we have been implementing certain deliberate measures throughout the organization; those ought to contribute to reduced expenses during the back half of the year; and beyond that, our medium-duty truck forecast has grown more favorable. So those three items are genuinely the main ones. Breaking down profitability by subsec isn't something we're going to do. Those three factors are truly what has driven the improvement. Yes; and the way volume converted in the second quarter, I think, revealed to us that there remains, yes, additional opportunity to get better simply through general operating efficiencies. Pricing has stayed essentially unchanged across most of the segments.
David Raso
analystHello, and thanks. I want to ask about the guidance. There's one piece where I have some doubt, and one piece where it looks like you could do better. In the engine segment, for the back half of the year, you're pointing to a revenue decline of just 3% versus a year ago. And I'm working through the fact that heavy truck production is falling by a double-digit rate, even though the parts side of things softens that impact. On light-duty, there's a weak Q4 tied to the model changeover.
David Raso
analystLet's look at off-highway and on-highway — China's doing somewhat better, yet agriculture saw significant drops, and construction too, correct? So I want to figure out the reason revenue would decline by just 3%, or whether sufficient new customer penetration exists to counteract all of that. Also, why do engine margins fall only 30 basis points quarter over quarter when revenues are lower? Then the bright spot is power gen, with revenue growth under 5% year over year during the second half. During the first half, you were up more than 6%. And margins have declined quarter over quarter. I get that the industrial portion inside power could shrink, but at minimum on-highway is there. So I'm simply attempting to grasp this. My assumption is power gen receives somewhat greater emphasis, somewhat more capacity, correct, being driven with at least favorable pricing. So once more, what's the reason, or perhaps it's simply prudence, being cautious about power gen, and if you could help us feel better regarding that engine guidance.
David Raso
analystI appreciate it. Correct.
Mark Smith
executiveAppreciate that, David. Those are solid questions. Regarding the power system, my view is that nothing has really shifted in a fundamental way. What matters most is the volume of product we get out to our customers, plus the conversion; we provided a spread of possible results for the margin. Performance across the business is strong. And honestly, we are adding capacity. So I would not expect sales to rise much beyond that, though yes, we are pushing hard on profitability. Things are going really well in that business. So my sense is there is little to worry about on that front. And we have lifted the outlook. Turning to the engine business, what I believe is softening the impact on margins — which is, I suppose, the piece that matters most — is largely a few of the cost-cutting steps we implemented over the course of the year, a somewhat improved forecast for parts. And beyond that, there are simply various other pluses and minuses when it comes to revenue. But those factors explain why, at those revenue levels, we anticipate margins will remain firm.
David Raso
analystSorry, I've got a little bit of a cold here.
Jennifer Rumsey
executivePlease proceed. Let's take the following question.
Tami Zakaria
analystHello there, and good morning. That was a really strong quarter. I have a couple of brief questions for clarification. The first concerns the Distribution segment. My understanding is that margins were reduced while sales were increased. So would you say that margin outlook is being carefully cautious, or does it simply reflect the mixed headwind coming from power gen? Or is there something else about it I should know? The second question is about price cost. I believe you mentioned just now that at the enterprise level you still anticipate 2.5%. Given that certain raw materials prices have been declining, are you expecting any price cost improvement over the course of the year?
Jennifer Rumsey
executiveAddressing the second part of that, it isn't really material; across every one of the categories, we're likely facing roughly 50 basis points of cost pressure. It differs depending on the business and the segment; and then regarding distribution, you're correct to highlight the margins. So in truth, yes, when it comes to distribution, power gen dilutes things somewhat compared with the remainder of that segment, despite the fact that clearly inside Power Systems, it's quite accretive. So that holds. We've flagged that. Additionally, during the first and second quarter, a few modest individual charges arose that weren't worth flagging within the overall results; they don't warrant much discussion, but let's just note they shaved the margins down somewhat. And so, we're essentially just mirroring where we stand for the year. Our view remains that distribution margins still hold considerable room to improve down the road. So that's the situation there.
Tim Thein
analystHello there, and good morning. Perhaps I'll merge these two items prior to receiving the hook, since both actually relate to the heavy-duty segment in North America. The initial portion, Mark, concerns market shares. Naturally, those are able to shift, and they do, from one quarter to the next.
Tim Thein
analystLooking at the larger picture, since we're heading into a weaker second half, the sleeper category will probably take a bigger hit on the production side, while vocational gets spared. My guess is that works in Cummins' favor when it comes to share, assuming there aren't any particular OEM programs or other things in play—so I'd be curious to hear what you think about that. Then the other piece is the parts business. It's clearly been somewhat uneven over the last several quarters, yet the commentary sounds more upbeat, even though a number of dealers and OEMs that have recently reported have pointed to weakness in that area.
Tim Thein
analystSo I'm just wondering, does that come down to simply not having the customer destocking you experienced during the prior year, or is it more about improved fleet utilization? If you're able to speak to those two factors, what's behind it? Thanks. Yes. Excellent.
Jennifer Rumsey
executiveAppreciate the inquiry. Like you pointed out, what we're doing is building up a base of customers for the heavy-duty offering across a range of segments. Broadly speaking, as you mentioned, when it comes to vocational, our customer pool is deeper than it is for truckload. That's the slice of the market performing better at the moment. Naturally, we always aim to deliver the finest product and generate interest in Cummins offerings. When you look at how things move among the market's various segments and what OEMs are doing with incentives, plus capacity, that picture can wiggle a bit as time goes on. With regard to parts, it's partly a function of demand. Beyond that, the inventory destocking played a fairly significant role. A deliberate push took place during the prior year to bring down certain stockpiles that had built up owing to the disruptions all of us were experiencing. As things returned toward typical inventory positions, distinguishing destocking from actual market demand proved somewhat tricky; so at this point you're seeing us land in what we regard as fairly stable and healthy demand across both our on-highway and off-highway markets.
Noah Kaye
analystThank you. I was wondering if we could hear how things stand with orders for the X15N. What does the second half look like? Is it matching what you anticipated? And really, what feedback have the OEs given so far?
Jennifer Rumsey
executiveSure. Appreciate that, Noah. This month we're bringing that product to market alongside PACCAR. It's exciting to finally have it available to customers. Then comes our launch with DTNA next year, which will broaden the offerings. Already, we're seeing some initial interest from several large fleet buyers who have sustainability targets. Over time, we'll watch how that picture evolves, particularly among those fleets and other buyers. Our projection is that we could reach roughly 8% of the market; however, reaching that figure will likely require time, as will the market's growth and the way operating costs and sustainability targets push demand higher.
Jeff Kauffman
analystI'd like to pick up where we left off regarding the engine deceleration you expect during the year's back half, and perhaps extend that discussion into the early part of 2025, since I believe there's a view out there that things look soft for a quarter or two, after which the pre-buy comes along and suddenly we're off to the races. At what point do you think we could begin posting positive comparisons in North American engines? Also, we've got an election coming this November, and honestly I'm not sure how it will turn out. That said, any perspective on whether a Republican win or a Democratic win would alter the picture for engines or for new power?
Jennifer Rumsey
executiveYes. Regarding demand for heavy-duty trucks, everyone would love a crystal ball to foresee how things will unfold. This particular cycle has looked quite unlike earlier ones, largely due to the backlog of demand we observed. Then, naturally, there were expectations of purchases being pulled forward. That makes it very hard to say precisely when during the coming year things will begin improving. Economic factors are definitely going to matter there. So I won't forecast the exact timing, though I believe at some point during the coming year, a rebound will come. We've already acted so that we're ready for that downturn across the coming few quarters. On the election, once again, I won't offer any forecast there either. What I can say is that, as we've always done, we previously collaborated with the Trump administration. We collaborated with the Biden administration. We engage across party lines so that the opportunities and challenges facing our industry are well understood and so that regulation and policy properly reflect them. We'll keep doing that, especially regarding the regulations currently before us. Our Destination Zero Strategy is fundamentally about acknowledging the economic significance of commercial and industrial applications, plus the necessity of decarbonizing that industry over time, and figuring out how to take suitable steps via regulation and incentives to achieve it. We will keep advocating for that. Certain funds that emerged from the Inflation Reduction Act have been assigned and are moving into the marketplace and generating jobs throughout the United States. We'll keep stressing those points, along with the opportunities and challenges we confront and how we manage the energy transition. I believe Cummins is extremely well-positioned no matter how that turns out. Yet the industry, obviously, is investing and getting ready for it. So we want to ensure we have stability and regulation, above all. And let me just add, I realize there are many questions regarding heavy duty, but as was said earlier, medium duty demand is becoming stronger. We're in fact putting money into increasing capacity over time, partly due to market strength, partly due to new business we've secured. So at present, the expectation we're hearing is for less volatility and sustained high demand. Circumstances could shift depending on the economy. But there are more uncertainties surrounding heavy. Obviously, it's declining in the near term, and far fewer uncertainties surrounding medium duty at the moment. Thank you.
Kyle Menges
analystThanks. I was hoping to go a bit further into Power Systems, with the main emphasis on the unit outlook and on how we should think about capacity for the rest of this year, and then on how you view exiting the year from a capacity perspective. I mean, simply working through the numbers, it appears that — assuming you are operating at a fairly high level in terms of capacity — unit shipments capacity for this year would come to roughly 20,000 units or thereabouts. And I'm interested in what that could look like, the capacity on an annualized basis as you leave the year and head into 2025 with some of the investments you're making. Well, unfortunately there's a lot — in that business, there's greater variation, correct?
Mark Smith
executiveThe variety of engines and the ways they're used is simply enormous. Unfortunately, then, you can't give a neat, straightforward answer the way you could, for instance, with on-highway markets, since the products sold there span a much tighter set. My expectation isn't that we'll see big jumps in capacity during this year, though naturally we're aiming to back the single major worldwide structural trend — data center capacity, the topic Jen Bush addressed on Analyst Day; that's the one. It differs from one segment to another. Demand has fallen across 18 months in a few of the segments we serve that lean more toward consumers, so a bit more capacity exists in those. As such, it hinges heavily on which end market you mean. Still, the broad picture involves certain capacity spending plus some reshuffling of where around the globe we build things. Regarding the revenue guide for this year, our confidence is solid. Our confidence is solid that production can carry revenue into next year. Yet sadly, given how much products, pricing, and applications vary, a units-based rule of thumb doesn't really hold up within that segment.
Jennifer Rumsey
executiveYes. Beyond what Mark said, and everything he mentioned is completely on point, one thing I want to highlight is what happened during the first half of the year specifically in the data center market: we put a lot of effort into our supply base and production, and the 95-liter is now running at capacity. After that, we brought out the Centum product, which brings in more platforms, among them a 78-liter capable of operating at that 3-megawatt key data center point, and that has been a help to us. Between the supply chain gains and the new product introduction, we've been able to grow revenue and what we sell into the market, yet we keep hitting capacity constraints on certain platforms within that data center market especially, which explains why we're making some modest investments so we can add capacity across the next couple of years.
Chris Clulow
executiveI appreciate everyone joining us today. That brings things to a close for now. Like always, our investor relations team will be around to take questions once this call ends and during the remainder of the week. Thanks so much. Goodbye.
Operator
operatorThanks. That brings us to the end of today's call. At this point, you're free to hang up. We appreciate you joining us, and enjoy the rest of your day.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Cummins Inc. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.
Get the API View API docs →This call discussed
For developers and AI pipelines
Programmatic access to Cummins Inc. earnings transcripts and 132,000+ others is available through the
EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments,
full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.
More tools for stock research
OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Cummins Inc. or any ticker on your watchlist.
StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.