Cummins Inc. (CMI) Earnings Call Transcript & Summary
November 5, 2024
Earnings Call Speaker Segments
Chris Clulow
executiveThanks, Julian. Good morning, all, and welcome to today's teleconference, where we'll go over Cummins' results for Q3 2024. Joining me are Jennifer Rumsey, our Chair and Chief Executive Officer, and Mark Smith, our Chief Financial Officer; all of us will be on hand to take questions once the teleconference ends. Before we begin, please be aware that certain information you hear or receive today will include forward-looking statements as defined under the Securities and Exchange Act of 1934. These statements convey our forecasts, expectations, hopes, beliefs and intentions concerning future strategies. Actual results down the road could differ materially from what such forward-looking statements project, owing to various risks and uncertainties. Additional details about these risks and uncertainties can be found in the forward-looking disclosure statement in the slide deck and in our filings with the Securities and Exchange Commission, especially the Risk Factors section of our most recently filed annual report on Form 10-K and any quarterly reports on Form 10-Q filed afterward. Over the course of this call, we'll discuss certain non-GAAP financial measures, and we'll point you to our website for the reconciliation of those measures to GAAP financial measures. Our press release, along with a copy of the financial statements and a copy of today's webcast presentation, is available on our website in the Investor Relations section at cummins.com. I'll now hand things over to our Chair and CEO, Jennifer Rumsey, to kick us off.
Jen Rumsey
executiveChris, appreciate that, and hello everyone. To start, I'll give you an overview of our third-quarter accomplishments and the financials behind them. Next, I'll review demand and end-market activity across each region. Finally, I'll close with our outlook for how 2024 is coming together. After my remarks, Mark will cover more granular points regarding the quarter's financial results as well as our full-year guidance. But before we get into the numbers, let me take a moment to highlight several important wins from the third quarter. During September, we kicked off full production of the X15N natural gas engine at the Jamestown Engine Plant — the first variant of our 15-liter helm platform to be introduced in the U.S. The X15N provides the performance, durability and power that a wide range of applications demand, and it's a superb option for fleets aiming to meaningfully shrink their carbon footprint. This marks a key milestone as we execute our Destination Zero strategy, working to lessen the impact of our products now while putting money into cleaner power solutions going forward. Several of North America's biggest and most rigorous heavy-duty fleets have been actively working with Cummins after running their own field tests of the natural gas engine. Take UPS: the company purchased 250 Kenworth trucks equipped with the X15N, and it highlights that move as an essential component of cutting carbon from its ground operations. Then, at the IAA transportation show held in Hannover, Germany, Cummins received a further opportunity to demonstrate how our Destination Zero approach works in practice, thanks to our broad portfolio of power offerings. While there, we put our completely integrated powertrain concept on display, incorporating our HELM engine platforms along with e-components. In addition, I personally had the chance to listen as Cummins customers described the obstacles they encounter when pursuing decarbonization. Our belief at Cummins remains unchanged: no single answer will meet everything our customers require. That was a great opportunity to demonstrate further that Cummins and Accelera have the right pieces in our portfolio to provide the solutions customers need as their requirements evolve. Additionally, October saw Accelera by Cummins officially open its electrolyzer plant in Spain. The site has the capacity to turn out 500 megawatts of electrolyzers each year, with room to grow past 1 gigawatt yearly later on. This sustainably built facility is expected to create 150 high-skill positions locally, potentially rising to 200 as output grows, and it will support expanding development, production and uptake of zero emissions technologies across Europe. To wrap up, I'd like to express how deeply we feel for all those who have been affected by Hurricanes Helene and Milton here in the U.S., as well as those still working to recover; we're grateful that every one of our team members in the impacted regions is confirmed safe and accounted for. Although the third quarter did bring some slight effects on our financials, I feel great pride in the way Cummins staff came together to support colleagues, communities, and sites that were hit, and to deal with this tragedy while keeping disruption to our industry to a minimum; next I'll walk through how the whole company performed in Q3 of 2024 and touch on several of our major markets, beginning with North America, then turn to our biggest markets outside the US. Across a number of our main markets and regions, appetite for what we sell is still robust, though this is balanced against a softening North America heavy-duty truck market, which matched what we had anticipated. Quarterly sales came in at $8.5 billion, unchanged versus the third quarter of 2023, mainly the result of sustained strong demand in our worldwide power generation markets plus better pricing. That was counterbalanced by reduced North America heavy-duty truck volumes and lower sales stemming from the Atmus separation. EBITDA reached $1.4 billion, or 16.4%, versus $1.2 billion, or 14.6%, a year earlier. Results for the third quarter of 2023 contained $26 million of costs tied to the Atmus separation. EBITDA and gross margin dollars rose relative to the third quarter of 2023, since gains from greater power generation volumes, pricing, and operational efficiency outweighed the margin decline caused by the Atmus separation. In North America, third-quarter revenue declined 1%, landing at $5.2 billion. Gains from strong medium-duty truck and power generation demand mostly canceled out several drags: a heavy-duty market that has softened, weaker light-duty volumes, and reduced sales stemming from the Atmus separation. Industry production of heavy-duty trucks reached 68,000 units in Q3, down 10% compared with 2023, and our heavy-duty unit sales came in at 25,000, off 14% year over year. On the medium-duty side, third-quarter 2024 industry production was 41,000 units, up 12% from 2023 levels, and our unit sales totaled 38,000, an 18% increase. For RAM pickups, we shipped 28,000 engines to Stellantis in the third quarter of 2024, which represents a 31% decline from 2023. In North America, our Power generation top line rose 18%, driven by data center and mission-critical power needs that remain very strong. Thanks to those excellent power generation outcomes both in North America and globally, the Power Systems segment delivered record sales and record profitability. For the third quarter, our revenues outside the U.S. were up 2% versus the prior year. Including joint ventures, third quarter revenue in China came to $1.5 billion, a decline of 4%, since softer truck and construction volumes domestically were only partially offset by greater data center demand. Medium and heavy-duty truck demand in China across the industry hit 207,000 units, which is 15% lower than a year ago. Demand in the China truck market keeps running at low levels, with the domestic diesel market still weak and natural gas orders now softening as the diesel-gas price differential narrows. In China, the light-duty market came in at 424,000 units, which is a 4% decline versus 2023 levels, and our units sold, including joint ventures, reached 30,000, up 14%. For excavators in China, industry demand during the third quarter totaled 44,000 units, representing a 10% gain over 2023 levels. Our units sold came to 8,000 units, a 14% increase, reflecting QSM15 penetration across both new and existing OEM partners as well as export growth. During Q3, China saw sales of power generation equipment almost double, with the primary driver being sustained expansion in data center demand. Revenue for the third quarter in India, which includes joint ventures, came to $641 million — a 12% decline compared with the same period last year. Industry truck production decreased 12%, and our shipments dropped 18%, reflecting a pullback in manufacturing and government infrastructure spending. Year-on-year, power generation revenues climbed 49%, propelled by pre-buy demand for stationary power tied to CPCB IV emissions regulation changes, as well as stronger data center demand. I'll now share our 2024 outlook, along with a few remarks about specific regions and end markets. For 2024, we're still expecting revenue to land somewhere between a 3% decline and no change, which matches what we told you before. On the EBITDA side, we're raising our full-year target to roughly 15.5% — that puts us at the upper bound of the 15% to 15.5% range we shared previously.
Jen Rumsey
executiveOur outlook has improved for the Power Systems and Distribution segments, where we now anticipate greater sales and better margins, which should more than make up for the weaker revenue and profitability we foresee in Components. For heavy-duty trucks in North America, our projection stays at 255,000 to 275,000 units for 2024. During the third quarter, industry demand eased just as we had anticipated, and we foresee additional softening in the fourth quarter; for medium-duty trucks in North America, we are likewise holding our forecast at 150,000 to 160,000 units, which is flat to up 5% versus 2023, as an elevated backlog and strong vocational orders keep working in our favor. As we previously guided, engine shipments for pickup trucks in North America should come in at 135,000 to 145,000 units in 2024, and the scheduled model year changeover will probably cause a sharp yet short-lived drop in production during the fourth quarter; in China, total revenue including joint ventures is projected to fall 4% in 2024, since a persistently weak domestic diesel truck market is only partly offset by stronger power generation demand. Although the recent stimulus actions have yet to produce a material effect, we take encouragement from the fact that the focus on demand-side policies represents a positive step toward building economic momentum in China; in India, total revenue including joint ventures should rise 1% in 2024, mainly because robust power generation demand is counterbalancing weaker on-highway demand. For the year, we expect industry truck demand to range from down 5% to up 5%. In global construction, our projection is down 10% to flat compared with a year ago, unchanged from prior guidance, reflecting softer demand in China. Global power generation markets remain guided to up 15% to 20%, fueled by ongoing gains in the data center and mission-critical markets. Mining engine sales should land between down 5% and up 5%, again in line with what we previously guided. On aftermarket, our guidance is still flat to up 5% for 2024, with rebuild demand expected to ease somewhat in the fourth quarter. To sum up, we are keeping our sales guidance at down 3% to flat while raising our EBITDA guidance to roughly 15.5%. Third-quarter results, especially in Power Systems and Distribution, produced solid profitability even as the North America heavy-duty truck market softened. Even though we do anticipate further softening across several key markets in the fourth quarter, we remain dedicated to strong financial results and to giving cash back to our shareholders. In the quarter, we returned $250 million to shareholders through dividends, in line with our long-term plan of returning about 50% of operating cash flow to shareholders. I remain thankful for the dedication of our employees and leaders worldwide, who serve our customers while also delivering strong financial performance. The strong numbers we posted for Q3, along with the better outlook we've given for the whole year, keep showing that we're in a solid spot to put money into growing down the road — delivering lasting solutions that cut carbon from what we do and lift our financial results from one cycle to the next; at this point I'll hand things over to Mark.
Mark Smith
executiveThanks, Jen, and good morning, everyone. In Q3, we delivered strong revenue as well as profitability. Given that strength, we are maintaining our full-year revenue guidance unchanged, while lifting our EBITDA margin outlook to the top end of the range we gave earlier. Third-quarter revenue was $8.5 billion, flat compared with the same period a year ago, as organic improvement offset reduced sales stemming from the Atmus separation. Sales in North America declined 1%, while revenue outside North America increased 2%. Foreign exchange movements hurt sales by 1%. Quarterly EBITDA was $1.4 billion, which equals 16.4% of sales, compared with $1.2 billion, or 14.6% of sales, in last year's comparable period. Last year's numbers included $26 million of costs related to the Atmus separation. Favorable pricing, strong operational execution, and the absence of those Atmus separation expenses were the primary drivers behind the profitability gain. Now let's go through each line item in somewhat greater detail. Gross margin for the quarter was $2.2 billion, or 25.7% of sales, versus $2.1 billion, or 24.6%, a year before. Improved margins primarily stemmed from beneficial pricing, which varied by segment, together with operational improvements. Selling, administrative and research costs were $1.2 billion, or 13.8% of sales, compared with $1.2 billion, or 14.3%, a year ago, a figure that included expenses tied to the Atmus separation. Joint venture income totaled $99 million, a decline of $19 million from the prior year, mostly due to lower technology fees in our engine business and costs associated with launching Amplify Cell Technologies, our battery cell joint venture, which falls under Accelera and was formed in the previous quarter. Other income was $22 million, an improvement of $29 million versus a year ago, driven by mark-to-market gains on investments linked to company-owned life insurance. Interest expense totaled $83 million, $14 million lower than last year, primarily due to reduced weighted average interest rates. The all-in effective tax rate for Q3 was 19.2%, which included $36 million, or $0.26 per diluted share, of favorable discrete items. On an all-in basis, net earnings for the quarter were $809 million, or $5.86 per diluted share, versus $656 million, or $4.59 per diluted share, in 2023. EPS benefited from higher earnings as well as a smaller share count resulting from the tax-free share exchange connected to the Atmus separation, which closed in Q1. All-in operating cash flow was an inflow of $640 million. Operating cash flow year to date was an inflow of $65 million, which reflected $1.9 billion of payments required by the settlement agreement with regulatory agencies that we disclosed previously. Excluding the settlement, year-to-date operating cash flow for Q3 was $2 billion, compared with $2.5 billion over the first 9 months of last year. This year's reduced operating cash flow is primarily due to higher inventory; we do expect stronger operating cash flow in Q4 of this year. Now let me go through how each segment performed and what we are forecasting for 2024. Additionally, earnings came in at $4.459 per diluted share. I want to start by reminding all of you that when we talk about our 2024 outlook, we're including Atmus operations in our consolidated results up until the full separation was completed on March 18. Over in Components, we saw revenue of $2.7 billion, which represents a 16% decline compared to the previous year, while EBITDA moved from 13.6% of sales down to 12.9%. The main drivers there were the dilution resulting from the Atmus separation as well as weaker demand for heavy-duty trucks in North America. When we got to the end of Q3, Hurricane Helene struck several of our facilities located in North Carolina within the Drivetrain and Braking Systems business, which caused production disruptions and caused us to record some costs in our third quarter results. Our team has shown incredible resilience in genuinely tough circumstances and is working extremely hard to restore production. For Components overall, we now see full year 2024 revenues falling 12% to 15%, which at the midpoint is 2% below what we previously guided, with EBITDA margins in the 13.3% to 13.8% range, a decline from the 13.7% to 14.2% range we had given before. Now shifting to the Engine segment, third quarter revenues were $2.9 billion, about 1% lower than a year ago. EBITDA reached 14.7%, an improvement from 13.5% in the prior year, driven by operational gains and favorable pricing, which includes a retroactive pricing agreement in our light-duty business that closed during the third quarter. The benefits from pricing and lower operating costs more than offset the drag from reduced North American heavy-duty truck volumes. Looking at 2024, we expect Engine revenues to land somewhere between down 2% and up 1%, a tighter range than we gave previously, with EBITDA in the 13.7% to 14.2% band, consistent with what we shared last quarter. Switching to Distribution, revenues increased 16% year over year to a record $3 billion, powered by stronger demand for power generation products, particularly for data center applications. EBITDA as a percentage of sales rose to 12.5% from 12.1% a year ago, primarily due to higher volumes and pricing; we now expect 2024 Distribution revenues to grow 8% to 11%, which at the midpoint is 2% above our earlier guidance, largely because power generation markets have performed better. EBITDA margins are now expected to be between 11.5% and 12%, which is also an improvement from the 11.3% to 11.8% we had guided previously. Power Systems turned in another quarterly record. Revenues came to $1.7 billion, up 17%, and EBITDA increased from 16.2% to 19.4% of sales, fueled by higher volumes, particularly in power generation markets, improved pricing and other operational improvements. For 2024, we expect Power Systems revenues of 8% to 11%, which is 4% higher at the midpoint than our previous guide. EBITDA expectations have also been lifted to approximately 18.3% to 18.8%, up from 17.75% at the midpoint of the earlier guide. Accelera revenues grew 7% to $110 million, helped by additional electrolyzer installations. On EBITDA, we recorded a loss of $115 million, compared to a loss of $114 million in the same period last year. This translates to $4.459 per diluted share. We continue directing funds toward the products and capabilities supporting those parts of the business where we anticipate strong growth, while cutting costs in places where we think the opportunity has been deferred further into the future. For 2024, we expect revenue in the range of $400 million to $450 million, along with net losses of $400 million to $430 million — both unchanged from what we communicated last quarter. As Jen mentioned, given how strong the third quarter was, particularly in Power Systems and Distribution, we're lifting our full-year profitability outlook. We still expect 2024 company revenues to come in between a 3% decline and flat. We now anticipate company EBITDA margins of approximately 15.5%, which places us at the top end of the range we guided previously. Across all of 2024, our effective tax rate should be about 23.5%, excluding the tax-free gain related to Atmus and other discrete items, and that's below the 24% rate we'd guided earlier. Capital investments ought to land between $1.2 billion and $1.3 billion, consistent with prior commentary. In summary, Q3 2024 delivered strong sales and record profitability for us; in Q4, we'll see some softening across select markets, most notably North America heavy-duty truck. Because of solid execution — especially the record full-year EBITDA we now forecast for Power Systems and Distribution — we've raised our EBITDA outlook to the upper end of the prior guidance range. In Q4 2023 and Q1 2024, we implemented certain cost-reduction measures, and we continue to identify ways to operate more efficiently going forward, which positions us well to absorb any further economic cyclicality. We remain on track to continue our trend of cycle-over-cycle performance improvement, while still making investments for the future. That's encouraging, given that North American heavy-duty truck production is expected to be down this year. On capital allocation, our priorities for the remainder of this year are unchanged: reinvest for profitable growth, pay our strong cash dividends and maintain our strong credit rating. We also delivered $4.459 per diluted share. Thank you for your interest today. I'll now turn things back to Chris.
Chris Clulow
executiveThanks, Mark. At this point we're going to move into the Q&A portion. <<operator_script>> Operator, please open the line for our first caller.
Steven Fisher
analystNice work on the beat and raise; those are tough to come by in the machinery sector right now. Still, I believe a few investors felt somewhat uneasy that perhaps the Q4 guidance appears a bit cautious following such a solid Q3. I'm not sure how much of that ties back to the storm's effect on Components. But I suppose the larger question here is, despite it possibly being somewhat early, do you believe there are sufficient positives to counterbalance the remaining slump we're seeing in the heavy-duty truck market, no matter how long it continues, to keep EBITDA rising through the next year?
Jen Rumsey
executiveYes. So allow me to say something first, Steve. Thanks. Wonderful to hear from you. Let me offer a few thoughts on the fourth quarter and what we anticipate. There are really 3 factors I would highlight in the revenue guide for fourth quarter; we anticipate additional softening in the heavy-duty market. I mentioned the product changeover with Stellantis that will cause additional volume decline in that pickup truck business; and then just working days with year-end will be reduced, and we observe across many of our markets, fewer working days tied to the holidays and routine maintenance and upgrades throughout that period of time. So those are really the factors. As you can see, we're — the team has done a wonderful job of maintaining focus on profitability throughout the business, delivering strong decremental margins where we've seen reductions in heavy-duty, which requires a lot of effort. I simply want to recognize the wonderful work of the team and then capitalizing on some of the areas where we have strength with really strong performance, of course; and power gen that affected Power Systems and DBU; and we anticipate that to persist as we move into next year.
Steven Fisher
analystAll right. And maybe picking up where you just left off, how would you describe the momentum in Power Gen right now? I mean, does that amount to record revenues for the quarter? You're sold out on the 95 liters. What about capacity utilization on the 50s and 78s? Where's the extra upside coming from at this point? Is it largely pricing? Or can you push additional volumes?
Jen Rumsey
executiveIt's truly both. So all year long, we've concentrated on strategic pricing and covering some of the inflationary costs we've run into, plus pricing for value in that business. And we've been tackling capacity in the supply base, together with our own operational improvements and the launch of the new <<inaudible>> product. So every one of those factors has driven improvement across the year. The 95-liter sits at capacity, but through those improvements we've been able to lift capacity by about 30% on that product in '24 of the new products. And then, as we talked about earlier, we're currently investing to double capacity in the 95-liter. That'll come online late next year or as we go into 2026. We're reserving build slots on the 9.5-liter out to 2027. We see no end in sight when it comes to demand in that market. So really focused on how do we leverage the capacity we have now, investment we have now while we're bringing more online late next year.
Mark Smith
executiveAlso, Steve, regarding your initial inquiry, the sole point I would include is that we aren't — what we're doing is constructing our strategies around a fairly small beginning for heavy-duty truck in the opening six months of the coming year, based on our current view. So we take in your remarks and inquiries, and our attention is squarely on steering through this cycle.
Jen Rumsey
executiveI'd say that, you know, when it comes to what Helene and Milton did to us, that business is now running normally again, and we're just attempting to clear some of the accumulated work that piled up while the disruption was at its worst, though the team there has put in a truly enormous effort. Within Cummins Drivetrain and Braking Systems, we operate several sites across the Western North Carolina area, and those locations have been coping with the effects of that hurricane.
Angel Castillo Malpica
analystNice work on a solid quarter. I just hoped to go a bit further into certain forces that might shape the coming 2 years. I noticed a few headlines regarding possibly the California Omnibus low NOx rule, plus certain states perhaps pushing model year '25 enforcement to model year '26. Any thoughts, or perhaps interpretations of what that might indicate about how those rules are actually enforced and the chance of a pre-buy into '25 — or any wider implication for, say, overall demand from the industry for your engines?
Jen Rumsey
executiveYeah. What we have observed, naturally, during this year is that the CARB Omnibus regulations took effect. Once we reach '27, we see harmonization once more between EPA and CARB, and we consider that a good thing for the industry. What occurs in the interim regarding various states adopting those CARB rules — as you mentioned, a number have delayed — is somewhat hard to forecast; yet clearly, you observe reduced volumes this year in CARB even with certain flexibilities they introduced allowing sales of 200-milligram NOx product, alongside robust demand across the country; therefore we are monitoring that area carefully. Broadly speaking, as Mark pointed out, we expect softening as we move into next year within the heavy-duty truck market, and we still expect, subject to economic conditions, that the pre-buy will probably begin at some point in '25 before the '27 regulations.
Angel Castillo Malpica
analystThat's quite useful. Next, I just wanted to return to what was asked earlier regarding 2025 for power generation. My understanding is that you pointed to growth within power systems and that momentum carrying on there. I'm just wondering — it appears your guidance for power generation, 15% to 20%, stayed the same even with the ongoing strong results in that area. Could you speak to 2025, based only on early signals from your backlog? Should we expect that kind of 15% to 20% growth to carry over into next year? Or what's your view, given pricing and backlog signals as they stand today?
Jen Rumsey
executiveWhat I'd say is that demand in that market really will stay strong; so the whole question is what we're able to do when it comes to capacity and how we manage our supply base.
Mark Smith
executiveSo that's among the things that leave us feeling confident as we head into the year — that solid backlog, plus of course distribution, ought to stay fairly resilient, assuming there isn't some major economic shock.
Kyle Menges
analystWithin Power Systems, I noticed the Industrial segment had fairly robust expansion this quarter, even though some rivals clearly didn't post strong numbers in mining. So I'd really like to understand what's fueling that pickup and growth in the industrial piece, and how are you viewing it going into 4Q and 2025?
Jen Rumsey
executiveBroadly speaking, our forecast is essentially unchanged for the mining market. Some rebuild demand is showing up in those results, but there haven't really been meaningful changes in that market at this time.
Chris Clulow
executiveYeah, Kyle, I'd simply add on top of that — sure, as you're aware, mining truly is the central market for us when it comes to the industrial segment, and from where we sit, that's stayed fairly resilient, even though it has shifted somewhat across different regions. We've kept up a solid position both on the first-fit side and in the aftermarket, and that's what fuels the rebuild.
Mark Smith
executiveOne quarter's units shouldn't be overinterpreted.
Kyle Menges
analystUnderstood. Then a quick follow-up regarding Power Systems: with the updated guidance, it appears incrementals will land near 60% during 2024. So it would help if you could explain how we should frame incremental margins for that segment, and also for 2025? And I suppose why wouldn't it again be somewhere around 40% to 60%? And which factors might lead to softer incrementals in that segment next year?
Mark Smith
executivePeople do tell me I push the Power Systems business somewhat hard, so I'll likely avoid the 40% to 60%, but here's my take, Kyle: some of that gain came from reprioritization and a cost reset near the beginning of this journey, which has now been underway for a couple of years; so that benefit arrives early, and afterward there's been much greater emphasis on pricing capacity and efficient capacity improvements; so yes, we still believe more remains on both the top line and the bottom line. Expecting 40% to 60% incremental margins indefinitely isn't something I think we can do; specific updates will come in February. Yet based on what we know today, further improvement is what we'd expect as we move into next year.
Jerry Revich
analystCould you guys elaborate a bit more on how engine margins performed? Those third-quarter results were truly exceptional. Based on the guidance, we should see margins widen during Q4 even though sales are expected to decline. In your prepared comments, you brought up operating efficiencies. Would you mind going deeper into where exactly those efficiencies stand compared with where things were before COVID? Also, it seems like there's some momentum heading into '25 even if demand softens, simply looking at where that exit rate appears to land in Q4 against what the cost structure looked like in Q1. If you wouldn't mind, could you elaborate on those things?
Mark Smith
executiveSure. There's clearly been substantial post-COVID gains, there's no question about it, yet we haven't fully returned to the operating levels of 2019. So my view is that additional operational efficiency gains are still ahead. Beyond that, we've discussed how we're currently at the high point of this investment cycle. Naturally, robust medium-duty demand has been a real tailwind in the current climate, and our standing in that area keeps getting better. That has genuinely been a big help. And although we've already signaled it, and it will indeed occur, a brief yet steep drop in pickup truck engine output is coming during Q4, we regard it as mostly short-lived. Given everything we know as of today, I believe that production will pick back up. So the top line will likely encounter some pressure in the first half of the year for heavy duty compared with the first half of this year, yet we'll keep concentrating on operating costs. I noted briefly in my comments that we've genuinely been implementing changes to our organizational structure and expenses since Q4 of last year. Even though no single period showed anything dramatic, I believe that positions us favorably as we head into next year. In case you missed it, I mentioned it without intending to make a big deal of it, but we received some additional pricing that benefited Q3, and it applied retroactively to the beginning of the year. So we won't receive the entirety of that again during Q4. Even so, I think the cost base and the operational efficiencies could get a lift from China too, perhaps not right away but possibly over the medium term, since our earnings there are acceptable but well short of what China's full potential in the engine business could deliver. So there's plenty to be optimistic about, though when exactly earnings will accelerate in the engine business remains uncertain. That means we must stay focused on cost and efficiency certainly over the next 9 months.
Jerry Revich
analystGreat. Can I change topics and inquire about demand for the natural gas engine, now that you've started full-rate production? Could you give us an update on what you expect for natural gas's market share 6 to 12 months from now, given the demand and the ramp performance you mentioned in your prepared remarks?
Jen Rumsey
executiveYes. We've stated that we believe we can reach as much as an 8% — possibly 8% — market share with the natural gas offering. Several large fleets were testing it while it was in development. I also mentioned the part natural gas has played. So it's about how they begin increasing volume and building more confidence in its strong performance and efficiency. Basically, in most locations, it delivers not just a CO2 decrease for fleets seeking to shrink their CO2 footprint, but also lower operating costs, thanks to the fuel price gap between natural gas and diesel. So fleets wanting to pursue that will, I think, ramp up over time. Predicting exactly is difficult for me, since it also hinges on certain economic conditions affecting fleets right now and what those will look like across 12 months. Still, we're thrilled to have that product available now with Kenworth, and Daimler is going to launch it too in '25. So they'll also be positioned with it in the market.
Jamie Cook
analystGreat results. To start, you folks have discussed expanding output for big engines. A competitor mentioned last quarter that they were boosting large-engine capacity even more due to demand. So I'd like to know whether you're adjusting the capacity expansion you've described in the past? Also, how much extra capacity are you bringing on that might help 2025? Then my second question, Mark. I realize someone already covered Q4 versus Q3 margins, and there's an implied step down, but how much of that repricing you mentioned that benefited the engine business might we consider nonrecurring? And regarding Components, what role did the hurricanes play?
Jen Rumsey
executiveThank you, Jamie. I'll handle the first one and Mark can take the second. So throughout this year, you've seen new power generation products, and capacity — given the limits of today's equipment and our supply chain — rising roughly 30% on the 95-liter. Naturally, that will continue into next year. Right now the mindset across power systems is simply one more, and how can we keep extracting one more from every shift, every day, within the constraints we currently face. We'll stay focused on that and, naturally, work toward achieving that doubling of capacity for the 95 by next year. We keep evaluating it; we want to be prudent about where sensible investments can lift capacity even higher in places where market conditions are strong. So there's nothing particular to share at this moment, other than that we're still reviewing our footprint and where opportunities might exist.
Mark Smith
executiveRegarding that second point and what I mentioned initially, we'll see normal fluctuations on a quarter-over-quarter basis — and Jamie, I will address your particular questions. I just want to note that while those variations will occur, our attention remains firmly on expenses and efficiency, and naturally, delivering value through products that help customers succeed matters too. So yes, the retroactive portion of pricing came to roughly 50 basis points for the company during the quarter. Going forward there's a benefit, though it's smaller than that. Then on costs, you're referring to low tens of millions of dollars split between components and the elimination segment, where Hurricane Helene's effects led to some expenses. So we have puts and takes — certain positives and certain negatives show up in the results. As for the revenue guide, you can observe that it's unchanged, since we enjoy very clear visibility into OEM, heavy, medium, and pickup truck production, and the way these extremely well-operated customers prefer to operate is by having predictability regarding production levels. So revenue, I'd say, is well anchored. What matters most for us is keeping up this robust discipline on cost and efficiency as we move into the coming year, staying focused on readying ourselves for greater demand and future growth, lifting those margins as we outlined at the Analyst Day, and producing more cash. That's a major priority.
Tami Zakaria
analystI figured I'd ask one additional thing about incremental margin, since I believe that's truly where your recent quarterly performance begins. Looking at what you posted for incremental margin in Q3, it comes in at nearly 50% once you strip out the filtration separation, and that's pretty striking when you set it against a long-term goal of above '25. So, with the wins you're having in power generation products, engines apparently getting some retroactive pricing, and plenty of new offerings arriving over the coming couple of years, do you think your incremental margin objective could be raised on a long-term basis? In other words, as you head into next year, might you consider taking another look at that long-term incremental EBITDA margin target?
Mark Smith
executiveI'm not sure — my sense is we'll provide guidance only for the year, then we'll observe how things turn out. Our portfolio contains plenty of shifting pieces. Naturally, we feel we've performed quite well in our core business. Ever since our Analyst Day, on an incremental basis, the Accelera portion of the business has faced additional headwinds; even so, we're happy with how this year is going. Let's concentrate on closing out this year strongly. Come February, we'll hand you our complete guidance in all its technicolor. So I'm grateful for the question, but at this point, longer-term targets aren't something we'll discuss.
Rob Wertheimer
analystOnly a quick point of clarification — regarding that retroactive pricing, could you explain what it actually involves, or how much of it is still ongoing? And on a more basic level, does it suggest you've gained any additional pricing strength when it comes to engines, if this was something unprecedented and distinct? I've got a bigger question to follow.
Mark Smith
executiveI'd say nothing more should be inferred from it beyond the fact that the conversation has stretched on for quite some time. And it goes all the way back to January 1, Rob. So occasionally these matters simply need time before they get settled.
Chris Clulow
executiveCorrect. Just to reiterate, Rob, that falls within our light-duty segment. So the impact was fairly concentrated in that area.
Rob Wertheimer
analystGreat. All right, that's quite useful. But stepping back a bit, clearly both your company and your biggest rival in the large engine space are experiencing strong demand, and surely your customers are saying that you'll have a significant part to play many years down the road. Is it pretty evident that even the largest hyperscale data centers are going to rely on RESIP engines for backup? Could you share what your customers are communicating regarding how data centers are changing in design, scope, and scale, and how you see yourselves positioned over the coming 10 years?
Jen Rumsey
executiveYeah. I'd say we believe that within the next 10 years, reciprocating engines will be the answer for backup power. Naturally, they're exploring various possible choices for prime power and assessing how that pans out, but when it comes to other technologies we could turn to, in terms of lead time, cost, and reliability, matching what a diesel gen set delivers for backup power is difficult. So our view is that this will remain a solution for quite a while.
David Raso
analystGoing back to what you asked about the pre-buy, I realize today is election day as we sit here, so I'd love to hear your thinking on whether anything related to the election might change how you view the pre-buy.
Jen Rumsey
executiveDavid, I'm amazed you got all the way here before bringing that up.
David Raso
analystPlease clarify when you plan to roll out an engine that meets the '27 standard. Could you walk us through your thinking on that — the notion of perhaps bringing it out sooner, accumulating some credits? Clearly, the natural gas engines are already generating credits too. Could you just explain how you view the timing of these launches? And clearly, tied into that, anything you'd like to say about how the outcome of the White House and Congress races affects your thinking?
Jen Rumsey
executiveSure. What I'd say is that ultimately, Cummins will continue doing exactly what we've always done. We'll collaborate with people on both sides of the aisle and involve ourselves in matters that matter to our company and our sector, and that's what we'll keep doing. We did so under the Biden administration, under the previous Trump administration, and we'll do the same with whichever administration comes next. What matters greatly to us and to our sector is regulatory and legislative steadiness. And whatever happens in the election, we don't anticipate any shift when it comes to the '27 rules affecting our sector. So just as before, we truly — we've got a track record of reaching the market first with offerings that satisfy fresh rules and provide greater value to our buyers, and we constantly keep an eye on the landscape, asking what's the appropriate offering at the appropriate moment, and how do we factor in regulatory adaptability and credits as part of that approach; and with all of that in mind, we do plan to bring out the diesel variant of the 15-liter HELM platform during '26, prior to the '27 rule. And through that launch, we'll not only put a lower NOx offering on the market, but also one featuring considerable gains in fuel efficiency and operating costs, declining to a 7% efficiency gain in that offering, which will provide value to our buyers, and then we'll look at ways to further bolster our standing in that market via these regulatory shifts. And this aligns closely with our prior approach, and what has served Cummins well throughout the years is providing value to our buyers amid these regulatory shifts while bolstering our standing in the market. So that's what we plan to do. We currently have the 15-liter natural gas version available. We'll introduce a diesel variant of it during '26, and after that bring out our midrange offerings when '27 begins.
David Raso
analystWith the '27 coming out early, my guess is you had first quarter '26 in mind alongside the new model years. Could you shed some light — word in the channel suggests there may be a pre-buy of your engines during '25 to get ahead of that early '26 launch. Can you give us a hand here: is that perhaps boosting some of the truck orders we're seeing across the industry? After all, you account for 40% of the trucks out there. So a Cummins pre-buy would move total industry numbers quite significantly. And regarding what the new '27 engine costs when it arrives early in '26, can you give us a feel for the cost to the customer? Then the follow-up: how much of that is warranty versus the components? I'm simply attempting to gauge how much of all the '27 costs you're pulling into '26. That's a cost stemming from the pre-buy.
Jen Rumsey
executiveYes. So let me try to frame it, in the hope that's what you're thinking — naturally, on the specifics around pricing, those talks with customers are ongoing, and the precise timing and the transition from the current 15-liter to the next-generation 15-liter in '26, discussions with our customers continue there as well. So exact answers aren't something I'll provide. What I will say is we're adding meaningful engine and after-treatment content and technology, both to comply with the lower NOx regulation and to deliver better fuel efficiency plus operating cost and value to our customers. And that gets added as we launch this new product in '26. The requirement for a longer emissions warranty does not take effect until '27. So customers that buy this new high-efficiency market-leading products in '26 will not be <<inaudible>>.
Noah Kaye
analystTied to that shift, I suppose, is likely one of the largest R&D commitments this business has ever undertaken. So once we begin moving beyond it, could you perhaps help us consider—assist us in thinking through—where R&D spending is headed? It appears to be a fairly clear area where future growth could gain leverage. Yet you spent $1.5 billion in '23, and for '24 it'll be roughly in that same vicinity. What should our thinking be regarding that spending level moving forward?
Jen Rumsey
executiveYes. Well, you've captured it. At a record amount, a high amount, we're putting money in with these new platforms we're introducing to the market; our belief is those will set us up nicely going forward. Consequently, you'll observe a degree of normalization there. The precise form of it will hinge, honestly, on the way regulations develop and what the—what I refer to as the bridge period of technology resembles and how it moves toward zero emissions. Still, we'll watch that decline from our peak once we're beyond the '27 product launches, and R&D investment will keep going to build differentiation and value in the marketplace so the business grows across the long term.
Noah Kaye
analystSo in the event that you roll that out toward the end of the following year — or actually, my mistake, I believe your comment was '26 — that would suggest we'll begin reducing those peak levels.
Jen Rumsey
executiveBoth '26 and '27.
Noah Kaye
analystAll right. Now let's shift topics a bit. Could you describe how lasting the strength is in medium duty? My sense is that classes 6 and 7 have performed quite well. Some backlog remains there, but please just discuss the demand you're currently observing in the market and whether it carries over into the following year. You've already shared some of your outlook for heavy duty. So a medium-duty perspective would be useful.
Jen Rumsey
executiveYeah. I'd say, across the year, we're observing North America medium-duty rising slightly, somewhere between flat and up 5%. Demand continues to look quite robust. I mean, you've noticed a bit of inventory and some backlog normalization, yet demand remains very strong in our view; and given upcoming regulations on the horizon, we anticipate that will probably persist into next year.
Tim Thein
analystMy first question concerns the Distribution segment. I'm wondering about any potential mix effect, because when you consider the momentum we've observed and that you expect to persist for a while in power gen, it now accounts for roughly 10 points more of distribution revenues than it did 2 years back; and although part of that reflects parts having declined. So in a historical sense, that could be a mix headwind, since whole goods is expanding as a share of revenues, yet perhaps because demand is strong and supply is tight, that isn't happening. So what are your views on the mix inside distribution and how we should think about it moving forward?
Jen Rumsey
executiveYes. As you pointed out, whole goods is typically margin-dilutive versus aftermarket for us. If you simply take a broader view of the entire business, you have to factor in our actions on inflationary pricing and operational efficiencies, where we've tried to scale up for greater volume, and we will keep concentrating on those operational efficiencies. However, power generation gross revenue mix versus aftermarket is going to be negative where margin is concerned.
Mark Smith
executiveTim, that's the area where we keep pushing forward on operational efficiencies and other fronts, and naturally, we keep maximizing as much of the parts business as possible underneath. Yet what matters most is that we satisfy what customers expect while increasing earnings efficiently.
Tim Thein
analystUnderstood. Then, Mark, regarding the gross margin detail you provided before — you mentioned pricing a number of times. Did all of that stem from the retroactive agreement in light duty? Or might there have been...
Mark Smith
executiveWell, compared to last year, additional pricing exists; it simply seemed right for the engine segment to point out that this was a specific item. That said, other pricing was present, and for the remaining parts of the business, the general outlook has not moved much. Honestly, we had anticipated securing this additional pricing at the beginning of the year, and it is merely taking longer. What matters most is that it has now been reset. This is largely a matter of timing and a Q3 clustering; we had always factored something into our full-year figures. Therefore, looking at the entire year, there is little to add, except that it arrived in a choppier pattern owing to the catch-up effect.
Chris Clulow
executiveAlright, thank you so much. I’m grateful that all of you could be with us today. That brings our teleconference to an end. Thank you for taking part and for your ongoing interest. As usual, the Investor Relations team will be on hand to answer questions following this call.
Operator
operatorWe thank you for your participation. You may disconnect your lines at this time.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Cummins Inc. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.
Get the API View API docs →This call discussed
For developers and AI pipelines
Programmatic access to Cummins Inc. earnings transcripts and 132,000+ others is available through the
EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments,
full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.
More tools for stock research
OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Cummins Inc. or any ticker on your watchlist.
StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.