Gentex Corporation (GNTX) Earnings Call Transcript & Summary
October 23, 2026
Earnings Call Speaker Segments
Josh O'Berski
executiveThank you. Good morning, and thanks for being with us today on our third quarter 2026 earnings conference call. I'm Josh O'Berski, Vice President of Investor Relations at Gentex, and joining me are Steve Downing, our President and CEO; Neil Boehm, COO and CTO; and Kevin Nash, Vice President of Finance and CFO. I'd like to point out that a replay of this conference call webcast, together with edited transcripts, will be posted after the call in the investor section of our website at ir.gentex.com. A lot of what we say on today's call is forward-looking and reflects what we currently expect. Such statements carry a number of risks and uncertainties, known and unknown, including the ones described in our press release issued this morning and in our annual report on Form 10-K for the year ended December 31st, 2025, along with general economic conditions. Should risks or uncertainties materialize, or should our assumptions turn out to be incorrect, actual results could differ materially from those expressed or implied in these forward-looking statements. Before we get to our prepared remarks, I want to remind the investment community that we'll be taking part in both the SEMA Show from November 3rd through 6th and the 2027 Consumer Electronics Show from January 6th through 9th, both in Las Vegas, ahead of our next call. At both events, there will be booth tours, product demonstrations, and a chance to see the future of our technology on display. If you'd like to join us at these events, please reach out to me after this call, or speak with your favorite analyst about joining their scheduled booth tour. I'll now hand the call over to Steve Downing for our prepared remarks.
Steve Downing
executiveThanks, Josh. For Q3, net sales came in at $647.7 million, versus $655.2 million in last year's third quarter. Automotive unit results were broadly consistent with what we expected, though revenue landed roughly $35 million under the forecast we gave at the start of the quarter, which we attribute to certain customer issues along with launches that slipped; in North America, automotive revenue rose about 3% even as regional light vehicle production fell 5%. In Europe, revenue grew roughly 13% once you set aside the Volkswagen program loss. That said, the Volkswagen headwind was large enough to wipe out that underlying growth. On a global basis, automotive revenue was up approximately 2%, excluding the China and Volkswagen headwinds we've already covered, and that came despite global light vehicle production dropping by over 2%. That result speaks to the content growth we keep seeing across the primary automotive markets we serve. Beyond automotive, premium audio revenue climbed about 27%, reaching $54.7 million, while aerospace, biometrics, fire protection, and automotive aftermarket together grew around 5%. All told, our third quarter results show how resilient the business is and the ongoing payoff from our strategy of growing through technology, product mix, and diversification. Even with the difficulties in China and Europe, sales were roughly flat compared with a year ago. Solid performance in North America—fueled by ongoing adoption of advanced feature content and growth across our non-automotive product lines—helped counterbalance those headwinds. In Europe, the ongoing rollout of DMS and ICMS products helped soften the impact of lower vehicle production and mirror unit shipments, which underscores the value of raising content per vehicle. China stayed a headwind, with the industry conditions we've discussed continuing to weigh on unit shipments and revenue; on the bright side, our diversification strategy kept building momentum. Non-automotive revenue grew approximately 17% and accounted for 15% of total company revenue in the quarter, up from 12% in the third quarter of last year. Gross margin for the third quarter was 33.4%, versus 34.4% in the third quarter of 2025. That year-over-year decrease came mainly from higher precious metals costs, an unfavorable product mix, and less operating leverage given sales that fell short of what we anticipated. Although gross margin fell short of our expectations, the underlying drivers were fairly concentrated in just a couple of areas. Precious metal inflation has pushed up our bill of material costs over the past several quarters, and the sales shortfall against our forecast lowered the operating leverage we had expected. Our operations teams keep performing well, and we remain focused on engineering solutions and other cost-reduction opportunities to help counter inflation across several commodity areas. Consolidated operating expenses were $101.3 million in the third quarter, compared with $102.8 million last year; adjusted operating expenses were $97.5 million versus $101.8 million last year, excluding impairment, acquisition-related, and severance costs. The decrease in operating expenses on both a GAAP and adjusted basis reflects our ongoing discipline in managing spending as sales growth has moderated during 2026. Even as we keep a close watch on operating costs, we're funding a substantial slate of launches and foundational R&D work that matters for growth over the long haul. At our August Analyst and Investor Day, we noted that the dimmable visor program is advancing well and remains on track to launch late next year, and our large-area device project keeps moving toward a qualified product backed by a scalable manufacturing footprint. Third-quarter income from operations came in at $115.1 million, versus $122.3 million a year ago. Adjusted income from operations reached $118.8 million, compared with $123.4 million in last year's third quarter. The quarter's effective tax rate was 15.5%, against 16.3% in the same quarter a year earlier. Net income attributable to Gentex totaled $90.6 million, down from $101 million last year. Adjusted net income attributable to Gentex was $97.8 million, versus $103.7 million in the third quarter of 2025. Diluted earnings per share attributable to Gentex were 43 cents, compared with 46 cents in last year's third quarter. Adjusted diluted earnings per share were 47 cents in both periods. Kevin will now take over the call to walk through additional financial details.
Kevin Nash
executiveThank you, Steve. For Q3 of fiscal 2026, automotive net sales reached $552.5 million, compared with $573.7 million during the same period in fiscal 2025. Quarterly automotive revenue results tracked anticipated unit patterns and also reflected strong content expansion throughout the company's core markets. The reported figures include specific headwinds in China and from losing the VW program. Excluding those factors, automotive revenue was up about 2% versus the prior quarter, fueled by considerable outgrowth in North America and 13% growth in Europe, supported by a favorable product mix and higher electronic content per vehicle. In Q3 of '26, premium audio net sales came in at $54.7 million, compared with $43 million in Q3 of '25, representing roughly a 27% increase. The improvement was largely driven by higher sales of home separates and systems products. For home separates, the increase reflected greater sales of Reference Premiere speakers, while systems growth was led by Flexus, the second generation of the 5, 7s, and 9s, along with ProMedia products. Net sales in the other products category totaled $40.5 million in Q3 of '26, up 5% from Q3 of '25. That growth was primarily attributable to aerospace and fire protection revenues, which rose 135% and 36%, respectively, though it was partly offset by weaker aftermarket and accessory sales. During Q3 of fiscal '26, we bought back 5.7 million common shares at an average cost of $23.44 apiece, spending $132.6 million in total. So far this year, 11.6 million shares have been repurchased for $270.2 million overall, at an average price of $23.28 per share. Under the share repurchase plan we announced earlier, roughly 24.3 million shares were still available to buy as of September 30, '26. Now, on the balance sheet, the figures we're comparing today reflect September 30, '26 against December 31, '25. Turning to liquidity: we finished the quarter with cash and cash equivalents of $134.4 million, versus $145.6 million at year-end. Short-term and long-term investments came to $242.9 million, compared with $278.4 million at the close of '25. Accounts receivable stood at $404.6 million on September 30, up from $368.5 million at year-end, which reflects how sales and collections fell during the quarter. Inventories were $550.1 million as of September 30, against $516.3 million at year-end, mainly due to higher raw material balances tied to electronic components and precious metal-related materials. Accounts payable reached $263.6 million on September 30, compared with $249 million at year-end, largely because of the timing of payments and inventory purchases. For the quarter, preliminary cash flow from operations was $83.5 million, down from $147 million in the third quarter of '25. Working capital changes were the main cause of that drop: inventories rose, and accounts receivable increased because of the timing of sales and collections, partly offset by higher payables. Preliminary cash flow from operations for the first nine months of '26 came to $405.2 million, compared with $461.6 million in the same period of '25, again reflecting working capital changes. Capital spending in the third quarter was $17.7 million, versus $35.6 million in the third quarter of '25. Through the first three quarters of '26, capex totaled $53.9 million, versus $103.4 million across the matching span in '25. Third-quarter '26 depreciation and amortization expense was $25.7 million, compared with $25.9 million a year earlier. For the opening nine months of '26, D&A expense reached approximately $77.1 million, against $78.8 million in the corresponding period of '25. With that, I'll hand things over to Neil for a product update.
Neil Boehm
executiveThank you, Kevin. First off, I want to express appreciation to every analyst and investor who made the trip to our Zeeland, Michigan facilities in August for our Analyst and Investor Day; getting here isn't always simple, but having everyone on-site lets us showcase the progress and newest direction across many of our products. Those who attended could examine the newest Full Display Mirror, driver monitoring, and large-area device products; we also valued the chance to walk people through the facilities and show the capital and automation we've installed in support of all these technologies. Once more, thanks for taking the time to see what we do; now a brief rundown of launches and product updates. In Q3 of 2026, we maintained a robust pace of feature introductions across our automotive lineup. Features including Full Display Mirror, in-cabin monitoring, HomeLink, and advanced-feature OEC mirrors accounted for over 80% of the launches we made during that quarter. Clearly, even with the challenges confronting our industry, demand from consumers for sophisticated features continues to rise. Full Display Mirror remains a strong performer for Gentex, and acceptance of this product in the market has done nothing but increase. For Cadillac, Gentex's FDM contributed to the Cadillac Escalade winning the Comfort and Convenience Award in J.D. Power's 2026 U.S. Tech Experience Index Study, thanks to improved visibility, the removal of blind spots, and minimal need for users to learn or adjust. At our Analyst Day, we said we'd begun offering an accessory platform to Ford for the Super Duty. We see further chances to extend it throughout their range and to generate more volume on their high-end trim levels. In Europe, FDM keeps making steady headway—it launched on the DS 7 this quarter and is building momentum with other customers there. For 2026, we're still on track to reach our goal of 200,000 to 400,000 more FDM units than we shipped in 2025. Launches for driver monitoring and in-cabin monitoring systems remain robust; we're glad to have launched on the Genesis GV90, plus several other platforms at Hyundai-Kia and BMW. Those programs will keep expanding throughout this year and on through 2027, and we anticipate ongoing launches at these OEMs to help push toward our 2027 revenue goal of $80 million to $100 million from DMS and ICMS. Interest from customers in our dimmable visor and large-area device technology is still robust. Our inaugural dimmable visor program is proceeding as planned, with production slated to begin in the fourth quarter of 2027. We're working closely with additional OEMs on product design and testing in order to lock in further awards later this year and into early 2027. Performance and durability of the large-area device product keep getting better. Having worked through a lot of our toughest obstacles, we're making solid headway toward getting this product ready for production. In September, the Premium Audio teams joined forces with Luar at New York Fashion Week. Our cinema speakers, typically tucked away behind a theater screen, took center stage, blending cultural relevance with premium audio performance. The festivities continue with KlipschFest, our own in-house event set for November 6th and 7th at Klipsch global headquarters in Indianapolis. There, we'll close out the 80th anniversary festivities for Klipsch and Onkyo: a two-day listening experience, artifacts and memorabilia spanning the last 80 years, tours of the facility, live listening demos, and the opportunity to check out a fleet of fully equipped automotive and adventure vehicles. Premium Audio teams have also been hard at work preparing to launch our flagship headphone system, the Strata series, arriving on the market in November, plus the fan-favorite Reference Premiere 3 passive home theater loudspeakers. On the Bluetooth speaker side, our Music Series Gen 2 arrives this holiday season, together with Onkyo's Creator Series GX-IO all-in-one powered tabletop speaker system, which draws on Japanese design. So go out and buy these awesome products. This holiday season is going to be a memorable one, acoustically speaking. The opening three quarters of 2026 have been packed and marked by rapid shifts on many fronts, but Gentex's teams have continued to come through on the things that distinguish us from competitors: quality, consistency, and innovation. Having said that, I'll hand things over to Steve, who will share guidance and wrap us up.
Steve Downing
executiveThanks, Neil. I believe that's the first occasion I've heard the phrase cultural relevancy come from you. The company's assumptions for light vehicle production rely on the mid-October 2026 Mobility Global outlook. Worldwide light vehicle production is projected to fall roughly 4% during the fourth quarter of 2026 and roughly 2% across full-year 2026 versus last year. Worldwide production should rise roughly 1% in 2027. Even so, output in our primary automotive markets — North America, Europe, and Japan/Korea — is projected to fall roughly 1%, with the sole LVP growth coming from China and other markets. Considering the actual results through the first nine months of 2026, along with the light vehicle production forecast and what we expect from automotive, premium audio, and other products, we're updating parts of our full-year 2026 guidance. For the year, consolidated revenue is now expected at approximately $2.65 billion. Gross margin for the year should now be in the 34% to 34.5% range. Included in that range is an estimated $10 to $15 million in added costs we anticipate during the fourth quarter, with recoveries tied to those costs not projected before the first half of 2027. Operating expenses, excluding severance and impairments, are now projected at $395 million to $410 million. The tax rate is now expected to be between 16% and 16.5%. We're now expecting capex in the $100 million to $115 million range, while depreciation and amortization should land somewhere between $100 million and $105 million. Based on the Mobility Global light vehicle production forecast from mid-October 2026, along with our present expectations for revenue from automotive, premium audio, and other products, and despite the lower revenue we expect for 2026, we are maintaining our 2027 revenue outlook of $2.8 billion to $2.9 billion. That outlook implies 6% to 9% revenue growth relative to our updated 2026 guidance, even though light vehicle production in our primary markets is projected to decline by roughly 1%. We see this as a meaningful acceleration in outgrowth compared with the underlying market, and it reflects the expanding contribution from new technology, higher content per vehicle, and our diversifying customer base. Looking ahead, we are increasingly confident in the growth opportunities before us. Our forward guidance is beginning to reflect what our wider product and growth strategy is delivering. New technology, greater content per vehicle, and a more diversified customer base are fueling this pickup in growth. The progress we showed at our August Analyst and Investor Day also illustrates how far a number of these programs have come on the path to commercialization. Both our interior visor program and our large-area device portfolio keep advancing. The rollout of our fourth-generation Full Display Mirror is really ramping up now, and our engineering teams keep refining product design and cost while delivering some of the most advanced technology and features we have ever offered; we're also happy to have landed our first PCBA business award in the quarter, with production anticipated to start in 2029; that's one more chance to apply Gentex's advanced manufacturing capabilities to new products and markets, and we're actively chasing further PCBA opportunities with similar production timing. Beyond keeping us very busy with new technology and launches, we're also actively managing the challenges that are developing across the supply chain. Demand is robust for memory and other electronic components, and that is creating constraints on supply plus cost pressure across the electronics sector. Precious metal prices are still volatile after rising substantially during the past year. We anticipate those pressures will continue into Q4. Our teams are collaborating with customers regarding suitable reimbursement, while our engineering groups are pursuing design modifications and other chances to reduce costs. Taken together, we think that greater content, introductions of new products, diversification, and expansion into new markets are reshaping Gentex's growth profile. If we deliver on these growth opportunities and keep offsetting the cost pressures the industry faces, we believe we can generate meaningful long-term value for our shareholders. That wraps up our prepared comments for today; we can now move on to questions.
Joe Spak
analystThanks, and good morning to everybody. I suppose to kick things off, clearly there's a bit more cost pressure as we close out the year, and you mentioned the 10 to 15 in Q4 and that you expect to recover that during the first half, but it does feel like — as you've hinted at — there's simply broader pressure out there. Even though you'll recoup some of these costs you're taking on right now in the first half of next year, can you reach what I'd call par by '27 and be more real time, or will you forever be chasing your tail? And to that degree, does it introduce some risk that the '27 gross margin comes in under the mid-term level you set out at the Analyst Day?
Steve Downing
executiveIf you look at the delay, I'd say it's fairly typical for this industry. Naturally — and we'll probably dig into some specifics around DRAM, the costs, and what's happening with RAM pricing — that clearly creates an immediate headwind for us, since it takes time before customers agree on what that new pricing is. That's why reimbursement lags. Whenever prices escalate the way they are in our industry especially, you're always a little behind that curve, but you do catch up; that said, if you look at precious metals and what's happening with the other commodities, some of those are harder to recover. The electronics piece is fairly straightforward. It's purely a matter of timing for getting that back. There are definitely some headwinds as we head into next year. What works in our favor, though, is that despite the bill of material headwinds, if we achieve the growth rates we're discussing, we haven't enjoyed a tailwind from operational efficiency at a growth rate like that in some time. Through operational efficiency and the higher growth rate, those can offset a good deal of the margin headwinds caused by bill of material increases. Naturally, the contribution margin on incremental sales helps offset that too.
Joe Spak
analystAppreciate that. I did notice the release this quarter didn't include shipments. Going by your calculations, it sounded as though the VW and China headwinds — which you've been talking about for some time — amounted to 6 percentage points, I believe, for auto. Could you offer some kind of high-level commentary on the auto business around mirror volume, price, and mix that roughly bridges to that reported 4% decline?
Steve Downing
executiveYou mean the 4% figure for automotive light vehicle production declines? Yeah. On a unit basis, the decline was roughly one million versus last year, and essentially all of it traces straight back to the two factors you cited: the reductions in China and the loss of Volkswagen.
Joe Spak
analystAll right. Now, on pricing...
Steve Downing
executiveWhat accounts for the gap there, you see, is expansion across the remaining regions plus more content.
Joe Spak
analystOkay. I'll pass it on. Thanks.
Neil Boehm
executiveThanks.
Raj Gupta
analystThanks a lot for taking my questions. It seems you're comfortable restating the '27 outlook, even though revenue has now fallen short of expectations for, I believe, two quarters straight. How do we gain confidence in that forecast? Have you already identified offsets for some of the difficulties you're facing at present, or is this simply a matter of some delays from this year spilling into next year? And then, could you give us a sense of what portion of '27 revenue is contracted versus what depends on additional wins? Thanks.
Steve Downing
executiveThat's an excellent question. When you look at it, you're completely right that the quarter came in below what we anticipated this year. We referenced this somewhat in the press release, but the real driver was a couple of OEM launches. One of those was also affected by the Hyundai-Kia strike, the union strike happening on the ground there. I believe that removed a solid 60, 70,000 units from production for us in the third quarter. Sadly for us, that was also where we were launching DMS and ICMS and FDM, so the impact from those units was disproportionate, since that's where some of our highest content was being launched. Not only did it push those products back, but the ramp-up was also slower because as the strike concluded and they came back online, volumes didn't reach the levels we had expected. Then the other one was what Neil mentioned, the F-250, 350 launch. It came a bit later than we anticipated, and launch volumes weren't quite at the level we expected. Those were the major shortfalls. Setting those aside, we consider them one-time in nature, so they shouldn't affect go-forward in '27. As we said earlier, growth for '27 really comes from additional FDM growth, additional ICMS and driver monitoring awards; then the other reason we're confident in maintaining that guidance is that the VOXX team announced they've reached a deal with Alpine to take over distribution for Alpine products, and when you look at that, it will be another tailwind as we head into next year that we weren't expecting initially when we provided our very first 2027 guidance.
Raj Gupta
analystGot it, that helps. So to wrap up the earlier question about margins and how recoveries look going into next year — is there any very early indication you can share on next year's margins? What factors should we have in mind on both sides? Should we expect gross margins to improve on an annualized basis, and how will you handle OpEx given the unevenness we're seeing right now? Thanks.
Steve Downing
executiveIf I were putting together a way-too-early college football top 25, I'd probably say next year lands more in that 33% to 34% range. Obviously we're working through a lot of deals at the moment with our supply base regarding what's happening with electronics supply constraints, and there are plenty of them right now. It's not only about RAM anymore. You're beginning to hear about problems with raw PCBs. The industry is under a lot of pressure at the moment, and we're still working to push through it. If you asked me for that way-too-early prediction, I'd say that's probably the right range to consider. The headwinds would actually likely push that below it, but we think growth along with some of the new launches will help counterbalance some of those headwinds we're seeing on the bill of material side.
Raj Gupta
analystUnderstood. In that scenario, I'd assume OpEx stays in check.
Steve Downing
executiveYeah. Yeah. Yep.
Raj Gupta
analystGot it. Great. Appreciate all the detail, and best of luck.
Steve Downing
executiveThanks.
Neil Boehm
executiveThanks.
Davis Baker
analystHey, good morning, everyone. Appreciate you taking the questions. Perhaps to begin with, could you give us a bit more detail on what you're observing in the electronic components market, particularly with supply tightening incrementally? And then, following that same thread, what are the benefits of your in-house PCB capacity in this kind of environment?
Neil Boehm
executiveSure. Just a bit of detail on the electronic components, and Steve will build on that. We are seeing the impact. Obviously DDR and the memory part has been a major challenge for a number of quarters and will keep being so into '27 as well. That's clearly one everybody is aware of. Circuit boards is another area where cost has really risen sharply, and it isn't really the circuit board itself, it's actually subcomponents several tiers beneath that, where material is being consumed and replaced for data center circuit boards. We're beginning to see, several tiers down, supply getting tighter for building automotive boards, which means prices will keep trending upward. Those are the big ones. There's plenty of activity around passive devices too, but at this point those are all manageable and contained, though as we look toward '27, additional constraints will be placed in some of those areas.
Steve Downing
executiveTo give you a rough sense of the numbers, what we're seeing from the supply base we already have is crazy — per-unit price increases ranging anywhere from 8 to 10x. A component that literally cost $4 or $5 earlier this year now runs $40. That accounts for a lot of the headwinds we're working through at the moment: managing that with our customer base, making sure we get appropriate reimbursement, and also, over the longer term, recognizing that a cost structure like that won't support the business model for these products — we've got to engineer our way out of those.
Neil Boehm
executiveTurning to solutions. Think back to the component shortage period 5 years, 4 years ago, when we learned how to iterate designs and push VAVE, cost-savings initiatives through. The teams have done a great job on that with precious metals this year, and we've been able to begin driving some improvements and savings — we'll see some good savings through, or lack of increases in, '27. Also, with products such as our Full Display Mirror Generation 4, we're launching that actively at multiple customers, with that roll out beginning in '28; that product does not use the DDR. We have designs we're working on to get around these challenges. It's just going to take through '27 to get them deployed.
Steve Downing
executiveDavis, you also asked about PCB capacity, correct?
Davis Baker
analystExactly how much of an edge that gives us in this climate
Steve Downing
executiveis a fair question. We're in a really strong position. Clearly, with some of the volume declines we've experienced, we do have available space within our electronics manufacturing footprint. As we get ready for the PCBA award we mentioned during the prepared comments, we're actively figuring out what that floor space needs to look like. Our view is that to get started we already have plenty, though we wouldn't rule out bringing on additional capacity, depending on how large and how profitable the awards turn out to be. That's something we'll keep monitoring, and we're excited to look ahead to it, because from a geographic standpoint our manufacturing footprint is very unique, and it definitely holds a lot of appeal right now for many customers when it comes to our location in the US and our ability to do high-end electronics in a very efficient manner; it's something we keep evaluating and pushing hard for. Frankly, we're really excited about this opportunity beyond automotive as well.
Davis Baker
analystOkay, thank you, everyone. We can handle whatever remains separately later. Best of luck for the remainder of today.
Neil Boehm
executiveThank you, Davis.
Steve Downing
executiveThanks, Davis.
James Picariello
analystHey, good morning, everyone. Turning to that implied 4Q revenue guide — assuming the other segment keeps growing strongly, it would still suggest auto sales growing at a mid-single-digit kind of rate, perhaps roughly 4% year over year. Could you just walk us through the visibility you have into that bridge, to see that year-over-year inflection in the fourth quarter? Because clearly, through the first three quarters, with the China challenges and the issues in the VW business, we haven't seen that kind of growth rate so far this year.
Neil Boehm
executiveEvery one of our short-term forecasts is built off customer orders, just as it always has been, but typically they don't predict strikes either. The good thing about returning to production is that some of those launches we flagged as delayed — DMS, ICMS, and FDM — begin ramping volume again in the fourth quarter, after being somewhat lacking in Q3. That's where visibility starts to come through. Our Q4 figures rest really on customer orders, primarily. From the VOXX or the PAC side, this is the strongest stretch of their season too, and demand looks good, as you've seen with sales growth year over year throughout the year. That's really been fueled by brand-new products; the growth we saw earlier in the year — we wouldn't expect it to fail to deliver similar outgrowth versus last year, given the demand for the newer products. Yep.
James Picariello
analystUnderstood. Thanks. So returning to electronics sourcing for the coming year and the inflationary recoveries that could act as a swing factor — yesterday Visteon nearly doubled what they expect for DRAM and semiconductor recoveries next year, compared with the high forecast they already had. They linked it to the 2022 period, when we saw all that major inflationary pressure on semis. I'm just curious whether you'd connect it to that same period too, in terms of how you're viewing next year, and could you remind us what the recovery levels were back in 2022, if that gives you useful context? Thanks.
Steve Downing
executiveFirst, I'd say that in our current forecast for next year, we truly aren't modeling meaningful price increases from the recoveries. Why we say that is there will be a mix of a recovery period, but we're hopeful we can get through that period quite quickly and move on to what Neil was describing, which is redesigns that keep the price point more attainable for our customer base and the consumer. There's certainly a tailwind on a pure revenue basis from the possibility of price increases. The problem is obviously there's essentially no margin on those once you recover the actual cost change. We're viewing this on a pure baseline basis. We aren't building in any of that growth tied to recoveries helping drive that price.
James Picariello
analystUnderstood. Thanks. Thanks,
Neil Boehm
executiveJames.
Mark Delaney
analystYes, good morning, and thanks for taking the questions. If I could, another one please about how far the cost challenges reach. I think the electronics and semiconductor buy from Gentex has been running at least previously at about an $800 million annualized level. I know you mentioned some components are seeing pretty substantial increases, but I imagine it's only certain pieces of the buy. I don't know if you could help us with where that $800 million would be running at with current spot rates and help us sensitize the scope of the cost issues that the company's currently seeing?
Steve Downing
executiveI'm basing this on a blend of '26 updates plus '27 forecasts, so don't hold me to the precise figure, but the most recent thing I reviewed was around the $900 million mark. Some of the price increases we've been discussing may have been baked into that, though you're right. 800 is probably roughly correct for the trailing 12. Where we sit now and looking ahead, we'll likely land nearer that $900 million range, perhaps higher if our sales growth levels come through. Trying to trace it back to '22, a direct comparison with what we saw then is really tough. I'd describe it as different. The difference was that a small number of micro categories really accounted for most of the cost growth, though there were also other areas seeing deflation. LCDs continued to show deflation...
Mark Delaney
analystPassives.
Steve Downing
executivePassives have remained fairly steady, I'd say. From a strategic standpoint, I wouldn't call it different. It's simply that entirely separate portions of the electronics purchasing are inflationary at this point.
Mark Delaney
analystGot it. My second question is about the supply chain. Looking at the growth you expect to drive in 2027 — and I realize that driving it will cost more given where these components are coming in — but on the availability side, could you say a bit more about actually securing enough volume of these parts for next year to support all the different opportunities ahead for Gentex?
Steve Downing
executiveNo, that's a great question. That's probably the hardest piece. Even after you agree on pricing, constraints can still hit you. One thing we always focus on hard — and this is why Kevin mentioned inventories running higher — is trying to make sure we hold plenty of inventory, and of course that inventory's value climbs as prices rise. We aren't hesitant to secure as much as possible and keep it on hand. We work with the supply base constantly. I'd say the near-term risk there is still DDR. Right now that's probably the commodity with the tightest constraints. Going forward, though, as Neil mentioned, since a lot of the raw circuit board manufacturers have shifted their manufacturing process over to what data centers need, that obviously has taken some capacity away from the automotive support side, and we're watching that very carefully now. Obviously we have multiple suppliers to rely on, but making sure we lock in that capacity for next year becomes really important, especially given the growth rate we're seeing.
Mark Delaney
analystOne final follow-up, and after that I'll hand it over. Basically, how far along would you say you are with that process — meaning, are you about halfway there? I'm not sure; perhaps it's simply early in the planning stage, and maybe it's just normal not to have next year's volumes completely locked in. If you could shed a bit more light on where things stand with some of those supply talks and how much work remains, that would help. Thank you.
Steve Downing
executiveYeah. No, thank you, Mark. For most items, I'd say we're covered through the end of the year. Most things are likely fine all the way to the midpoint of next year. There are only a handful of commodities that concern us from now until midpoint next year. Past that, if you look at those levels, once the first half of the year is behind us, those run rates ought to be quite near what the end-of-the-year run rates are. If we can make it through the first half, we should be in good shape for the second half. Obviously, a great deal of effort goes into the supply base — giving them longer-term leads, making sure we have out-year forecasts that provide the planning they need to pull that off. It is a lot of work. I'd say we're probably around halfway through next year where we feel pretty good.
Mark Delaney
analystMhm.
Matthew Mays
analystHi there. Congratulations on landing that first PCBA award. I was just wondering—could you tell us what kind of customer it is and roughly what the yearly revenue looks like, and does that line up with the $150 to $200 million figure you laid out back in August?
Steve Downing
executiveYep. Thanks. A lot of effort went into that, and I appreciate it. The customer is one of our existing automotive ones, and that initial award comes in at roughly $180 million annualized per year.
Matthew Mays
analystUnderstood. Okay, that's great — very useful. Regarding visors, I'm curious whether there's any news about bringing on visor customers before the late 2027 launch?
Steve Downing
executiveI touched on it briefly — plenty of work is still underway there. We have three more customers who are fairly active and running evaluations, though there's nothing to announce yet when it comes to a sale or getting a deal closed.
Matthew Mays
analystUnderstood. One final question from me, and it's a brief one. Regarding capital allocation, you approximately doubled the buybacks this quarter. I'm just curious how we ought to view that pace moving forward, and whether any dividend increases might be possible?
Steve Downing
executiveFrom a total return perspective, I believe at present we'll likely lean toward concentrating more on the share repurchase side. Clearly, this stock has performed not well at all over the last year. When we consider these prices against our growth rate and the cash generation we expect over the next couple years, the stock price is hard for us to make sense of. When downturns like this occur, we tend to become more aggressive, as you saw in Q2. What you'll probably see from us is something very similar to what we did in Q2 as we progress through the end of this year and into next.
Matthew Mays
analystUnderstood. Excellent. That's everything from my side. I appreciate your time on my questions. Thank you, Matthew.
Steve Downing
executiveThank you, Matthew.
David Whiston
analystThank you. Good morning. Regarding precious metal inflation, is there any sort of big, obvious remedy out there that's outside your control — like the Iran war coming to an end or something similar — or does this go far past any geopolitical conflicts?
Steve Downing
executiveIt goes far past that. When you look at the ones causing the most pain, right, it's silver, gold, and ruthenium. From a pricing standpoint, those three commodity areas have been hit the hardest. Silver and gold are interesting since they're industrial products. Clearly there's also been a major shift toward investment-grade, and so you're seeing demand surge. Data centers, custom electronics — these kinds of products all rely on silver and gold, so demand has risen on the industrial side, and it's risen on the investment-grade side too, so there's just been a great deal of pressure there. Ruthenium is a far more thinly traded commodity, very difficult. I believe, Kevin, that it's probably up 500% over the last year and a half. That one has been something of a runaway train. Our actual approach there isn't so much about getting relief from supply — supply isn't going to rise dramatically in either of these cases to bring costs down. One thing Neil's team has been working on very hard is how we create VAVE opportunities that cut the amount of material each of our products needs. The team has already launched and executed a handful of those; we have many more that will roll out over the next 18 months, so the goal is simply to minimize the headwind tied to those commodity prices.
David Whiston
analystThank you. Then regarding China, I realize it might be somewhat early to raise this, but do you see any possibility of genuine improvement there in '27 compared with '26?
Steve Downing
executiveNo. As things stand, our plan is that we believe we're essentially at a fairly stable level for what our China business will be. There will probably be likely a small amount of headwinds still, but we aren't anticipating any tailwinds at any point soon.
David Whiston
analystAll right. Is anything else out there a significant supply chain constraint?
Steve Downing
executiveNo, I believe we covered most of them. Looking at DDR and raw PCBs, those are probably the largest.
David Whiston
analystThank you.
Steve Downing
executiveThanks, David. David.
Josh O'Berski
executiveOkay, thanks to all of you for joining us and for the questions you brought today. We’re looking forward to connecting with our customers and investors at SEMA and CES. Beyond that, we hope each of you enjoys a great weekend and a good remainder of your day.
Operator
operatorWe appreciate you joining us on today’s call. That brings the program to an end. You’re welcome to disconnect at this point. Have a wonderful day, everyone.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Gentex Corporation transcript — plus 133,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.
Get the API View API docs →This call discussed
For developers and AI pipelines
Programmatic access to Gentex Corporation earnings transcripts and 133,000+ others is available through the
EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments,
full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.
More tools for stock research
OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Gentex Corporation or any ticker on your watchlist.
StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.