Greenpanel Industries Limited (GREENPANEL) Earnings Call Transcript & Summary

November 2, 2026

National Stock Exchange of India IN Materials Paper and Forest Products earnings 57 min

Earnings Call Speaker Segments

Operator

operator
#1

Good day, everyone, and welcome to the Q2 FY '27 earnings conference call of Greenpanel Industries Limited. Kindly be aware that this call is being recorded. I'll now pass the line to Mr. Gavin Desa of CDR India. Thank you, and the floor is yours, sir.

Gavin Desa

unknown
#2

Thank you. Hello, everyone, and we appreciate your participation in Greenpanel Industries' Q2 and H1 FY '27 Earnings Conference Call. Joining us today are Mr. Shobhan Mittal, our Managing Director, along with Mr. Himanshu Jindal, the CFO. Before we get started, I want to note that certain remarks in today's discussion could be forward-looking and might carry risks and uncertainties. A detailed statement on this matter appears in the results presentation, which was shared with you previously. At this point, I'd like to hand things over to Mr. Shobhan Mittal to start the call. Shobhan, the floor is yours.

Shobhan Mittal

executive
#3

Thank you. Good evening, ladies and gentlemen, and welcome to the earnings call covering our second quarter and first half of FY '27. We keep working toward raising sales volume in every category, and the results from these efforts are starting to show. On the retail side, volume growth is still solid for both MDF and plywood, carrying forward the momentum from quarter 1. Retail MDF sales in Q2 were Greenpanel's highest ever in any single quarter. What's more, judging by the pickup ahead of the festive season, we expect a substantially better third quarter and second half of this fiscal year. Our annual foreign trip scheme, which brought together more than 150 of our top channel partners in Hong Kong and Macau in August, has helped strengthen our bonds with those partners even further, and it gives me confidence that we can push this growth further as we move into the second half of the year. The price-sensitive OEM segment was initially slow to react. In addition, because of the price increases we took in quarter 1, many OEMs had arranged alternative imports, and that effect carried over into Q2. We have carried out pricing realignment with major counterparties, which has supported volume recovery month-on-month.

Shobhan Mittal

executive
#4

Unstable circumstances in the Middle East are still with us, and they keep affecting how containers and vessels can be sourced, which pushes up delivery expenses for the people who ultimately buy our products. Even with additional increases in sea freight at the end of September, export sales continued to rise month-on-month. As of the start of October, our opening export order pipeline stands above the total sales recorded during Q2, which shows that customers in the region are increasingly inclined to see us once more as the reliable partner on both price and volume. The escalating freight costs have likewise turned imports into a less workable option for the domestic markets. Because OEM sales recovered late and export sales stayed flat owing to the geopolitical situation and sea freight difficulties, total volume declined by 3.4% even though retail sales rose 17% year-on-year, while the sequential growth over quarter 1 came to 23%. Plywood sales were strong as well, up 8.4% year-on-year, with sequential growth of 16.5% over quarter 1. Total revenue for quarter 2 FY '27 reached INR 407 crores, representing growth of 4.6% versus last year and 16.4% sequentially over quarter 1 FY '27. Across the first half of the year, our total revenues increased 6.3% year-on-year to INR 757 crores, tracking in line with expectations.

Shobhan Mittal

executive
#5

Domestic demand fundamentals remain solid. For MDF, we anticipate that 15% to 17% CAGR will persist. With the Furniture Quality Control Order 2025 having recently taken effect, wood panel demand in the country should receive additional support for growth. That QCO has been in force for over 6 months now. The transitional relief window for imports, along with the exemption window given to MSMEs, both expired in quarter 2. To fill the possible gap arising from QCO restrictions on substandard furniture imports, large furniture manufacturers have already begun or announced new capacity additions. Since Line 3 at Andhra is already running, Greenpanel has ample organic headroom to seize this opportunity. Looking ahead, we also anticipate that the present supply-demand gap will narrow. Under current pricing conditions, efficient multi-day lines are progressively turning unviable. Capacity addition momentum is likewise projected to ease going forward. Domestic supplies now match or beat imports on cost, and the recent rise in container freight has compounded the situation. Greenpanel will keep focusing on gaining relative market share. For the full year, our target is mid-teen MDF volume growth.

Shobhan Mittal

executive
#6

For our retail MDF business, we expect solid growth compared with a year earlier, and we're targeting recovery during the remaining six months of this year of the volume shortfall in MDF OEM and export MDF from the first half. Turning to margins: pricing difficulties continue to weigh on them for now because of today's competitive pressure, but chemical cost inflation should ease in the second half, and cost efficiencies plus operating leverage ought to come through as well, with extra volumes supporting margin expansion down the road. On top of that, we're concentrating on closing gaps and cutting inefficiencies, which makes us leaner and better positioned to take advantage of our scale and capabilities. With that, I'll ask our CFO, Himanshu Jindal, to give the financial and other updates.

Himanshu Jindal

executive
#7

Thank you, Shobhan, and good evening, everyone. You've no doubt seen the figures in our earnings presentation. I'd like to draw attention to a few items. First, turning to margins. We realigned prices to counter competition and gain market share, and with chemical costs softening, our production cost also came down 5% sequentially. That said, given that quarter 2 still carries the disadvantage of more expensive opening inventory from quarter 1, the full benefit of the lower cost isn't yet apparent in the quarter. It was the combination of price reductions and a cost of goods that looks somewhat elevated that drove the margin contraction in quarter 2. Obviously, some portion of this was offset sequentially by better fixed cost absorption, given the soft volumes. Because of this, the consolidated operating EBITDA margin came in at 7.5% for the quarter, versus 9.6% in quarter 1 and 10.2% last year. For the first half, operating EBITDA margin improved, though, by 100 basis points to 8.4%. Second, on the balance sheet side, we remain disciplined, with working capital and leverage kept in check. The working capital cycle has improved by 5 days compared with the 30th of June numbers, while net debt has come down further to INR 133 crores.

Himanshu Jindal

executive
#8

We can take the questions now.

Operator

operator
#9

<<operator_script>>

Madhur Rathi

analyst
#10

My question concerns domestic volume. You said retail has performed well, yet it seems OEM still hasn't picked up. So could you explain what's driving the impact on OEM volume? And do you expect that OEM volume to improve over the remainder of the year?

Shobhan Mittal

executive
#11

Yes, Praveen. If you look at the year-on-year comparison for the second quarter of last year, we made significant corrective moves on pricing to drive OEM volumes. So between Q1 and Q2 of last year, OEM volumes nearly doubled. The Q2 base last year was roughly 8,000 cubic meters, and then in Q1 this year we implemented a substantial price increase. Any pricing advantage the OEMs had was eliminated, and they were purchased at par with retail price levels, mainly because of the war and rising chemical costs. So that did hurt OEM volumes. And since OEMs also plan for the long term in case a supplier is no longer viable for them, they went ahead and placed orders for imports, et cetera, which has also impacted Q2 volumes. Looking ahead, of course, our hope and strategy is to win back as much market share as possible from the OEMs. So we expect quarter 3 to be considerably better than the quarter 2 figures where OEM volumes are concerned.

Anubhav Goel

analyst
#12

So, has this trend shown up yet in October?

Shobhan Mittal

executive
#13

That is heading that way, I’d say. It hasn’t reached the levels we hope for, yet it is heading that way.

Madhur Rathi

analyst
#14

All right, so turning to how the full year grows. So, as you're asking, with a 15% to 17% CAGR in domestic volume — and if your OEM isn't picking up — then your figure would come in below that. Is that fair?

Shobhan Mittal

executive
#15

Our goal is to recover that through retail and to regain the OEM volumes as well. In addition, we intend to place fresh emphasis on the export side too. So I mean, what the company is aiming for right now is to at minimum expand at the same pace as the market size.

Analyst

analyst
#16

The next question concerns the margin, sir, since as you pointed out, that 5% chemical correction has not yet shown up. So should we expect it during the coming Q3 and Q4 — will that 5% correction in chemicals be reflected in the improvement of our gross margin?

Shobhan Mittal

executive
#17

Look, from where I sit, things are still pretty volatile. Crude prices are climbing once more. There's an expectation out there that the geopolitical picture will be thrown into disruption again before long. Given that, saying exactly where chemical prices will sit right now is really tough. There's just no way to forecast it.

Analyst

analyst
#18

When utilization gets better, you still don't see that showing up in your margin.

Shobhan Mittal

executive
#19

Sure. If utilization keeps getting better, operating leverage kicks in, and that will certainly help margins. There's no question about it.

Analyst

analyst
#20

However, that improvement doesn't show up when you compare Q1 with Q2. Utilization rose from 51% to 55%, yet your margin declined.

Shobhan Mittal

executive
#21

But also keep in mind, from Q1 to Q2, the whole industry saw a price correction as well.

Himanshu Jindal

executive
#22

Can I add a point here? Praveen, you'll notice — and please take a look at quarter 1 — we had a very sharp increase kicking in, right? We raised prices by close to 15%. If you look at my domestic ASPs as well, they went up 13.5% sequentially. On top of that, I had an opening inventory benefit. So anything produced or procured through quarter 4, right — I was holding 50,000 cubes of inventory, right — that got used up in a sense during quarter 1, right? So the full cost impact didn't show up in quarter 1. The price increase was clearly visible, and because of that gross margin rose very, very clearly by almost 5%. Now conversely, what's happening this quarter is we've seen pricing drop sharply, right? Our ASPs have contracted by 6%, 7%. But more importantly, alongside that, the full production cost piece is still absent. Why? Because I was still carrying 50,000 cubes from the previous quarter into this one, which had in a sense been manufactured at a higher cost. So those are the reasons why, optically, you can't see the differences, or you see these kinds of variations, very honestly.

Himanshu Jindal

executive
#23

Operating leverage is clearly showing up. Our fixed cost per cubic meter has definitely declined, but that alone isn't sufficient. We have to move more volume.

Operator

operator
#24

Our next question comes from Madhur Rathi, who is calling in from Counter Cyclical Investments.

Analyst

analyst
#25

I'm just trying to get a handle on the market leader situation — it seems our realizations come in below those of competitors who are smaller than we are. Take Greenply, for instance: they've also released Q2 numbers, including their MDF realization. So why does this dichotomy exist, that despite being the market leader...

Shobhan Mittal

executive
#26

I get what you're asking. Look, that situation mostly exists because there's a particular value-added mix that everybody's pursuing. Now, since my sales base is bigger, the share of higher-priced product in my value-added mix will be smaller as a percentage. It doesn't scale in tandem with your capacity or your -- so the E1 grade, or HDMR grade as we refer to it, everyone has a limited volume they're going after first. That's the priority. Greenply, with a smaller capacity base, clearly has a far higher percentage of that product than the percentage we'll have of it. And on an average kind of basis, my realization per cubic meter would look different. But if you take realization product by product, I'm at par with Greenply, or even better than what Greenply would be.

Analyst

analyst
#27

Got it. So essentially, when it comes to the like-for-like product — our base offering compared with competitors' base offerings, and our value-added against competitors' value-added — would you say we're priced at a premium, or are we selling at par relative to...

Shobhan Mittal

executive
#28

Well, it depends on which competitor you mean. I'd say that with a player like Action, we're at par, in my view. When it comes to Greenply, I believe we're definitely at a premium. And with Century as well, in most markets, on an apple-to-apple, like-to-like product basis, we're at a premium. Now, obviously, I won't compare with the Tier 2 companies, because I'm very sure we're at a much higher premium than those as well.

Analyst

analyst
#29

Sure, absolutely. Sir, though if we focus particularly on Century, they've managed to grow their MDF revenues to such an extent that during the first quarter, their volumes were slightly above our margin. Their volumes are a bit higher than ours. I'm referring only to MDF. And even so, their realizations came in above...

Shobhan Mittal

executive
#30

As a major participant, our mix has traditionally leaned more heavily toward, say, OEMs and interior products. We serve the whole country in that format. Our OEM share was also considerably bigger than what Century has. That explains why our attention has now shifted more toward retail. And we're looking to generate growth from retail in order to improve the overall — it's essentially a value mix play, I'd say...

Analyst

analyst
#31

Over 5 years, our absolute volume growth in the domestic market has trailed that of a smaller competitor like. So where exactly are we losing ground, given that rivals are ramping up volumes far quicker than we are? Where is it leaking under...

Shobhan Mittal

executive
#32

I've been saying this for several quarters now: there was a time when we were being undercut on pricing, but we've now made the decision to be price aggressive, and volume growth matters for us too.

Analyst

analyst
#33

If we look at our production costs compared with any competitor, how much lower would Greenpanel's cost of production be than any other player in this industry...

Shobhan Mittal

executive
#34

I can't tell you what production costs look like for the other companies. Take my own situation, though — the cost of production at the 2 plants differs a great deal, since raw material prices swing pretty sharply...

Analyst

analyst
#35

Understood. And sir, only one last question, sir: how are imports of MDF panel from Thailand and other geographies doing following the BIS that came into force a few years back...

Shobhan Mittal

executive
#36

My view is that what's really hit imports over the last few quarters is mainly the freight side, plus chemical costs rising because of the geopolitical situation. I don't believe BIS has done much to limit volumes. After BIS, another thing that happened was that domestic pricing reached a level sufficient to halt incoming imports, thanks to competition inside the country. So pinpointing how much benefit BIS has delivered to the domestic industry is very difficult, since many of the bigger suppliers already hold BIS certification as well -- I mean the import.

Speaker

unknown
#37

Our next question comes from Keshav Lahoti at HDFC Securities.

Keshav Lahoti

analyst
#38

I’d like to get clarity on something...

Shobhan Mittal

executive
#39

In OEM, the situation is always going to be more tied to whatever import prices are in the market, and that's also because OEM is such a commoditized line of business. Quality isn't the main concern there. Even a Tier 2 or Tier 3 player can come in and undercut you and grab that business. So this is a business exposed to a lot more threats than retail is. That's how it has always worked — as you saw, we made some pricing corrections last year between quarter 1 and quarter 2, and we managed to double the volumes. So in that sense it's an opportunistic business, and I'd call it a cyclical one as well. But we're confident and we're focused on bringing back — I mean, retail of course remains the prime focus. But on OEM too, we're putting effort into trying to restore the volumes we were enjoying last year. Yet, as I said earlier on this call, quarter 1 OEM took a hit from the price increases we made in the market, which wiped out the advantages of the OEM pricing. And quarter 2, naturally, carried a lingering effect, since they had already lined up the volumes they needed from alternate sources.

Shobhan Mittal

executive
#40

Particularly with imported goods, planning stretches further out and bigger quantities go into each order. That explains why — and given how freight has been — the shipments did not land the way they had expected. As a result, the impact dragged on for a longer…

Keshav Lahoti

analyst
#41

Could you give us a sense of what the margin is on the retail margin...

Shobhan Mittal

executive
#42

Himanshu, would you like to handle that one?

Himanshu Jindal

executive
#43

Naturally, it depends on where you are, which product it is, how big it is—all those things matter. But broadly speaking, yes, retail is more profitable. That part is extremely clear. The gap in margin could fall anywhere from 5% to 20%, again depending on pricing and what the costs look like. So it's really hard to give you one number, Keshav. Everything hinges on the volumes I'm getting when I go the OEM route or export. One advantage is that I get a very steady run, right? These are big bulk orders that we're servicing from our lines. So there's also an operating efficiency angle that plays in. I earn more on retail.

Shobhan Mittal

executive
#44

Regarding OEMs, these are essentially converters who purchase local material and process it in some manner. Under our company policy, they are not permitted to export our material. They must process it in some way and provide value addition to us. It is possible that they sell value-added products in the export market. There are certain that...

Keshav Lahoti

analyst
#45

I have one final question. I realize conditions are quite volatile right now, but would it be reasonable to expect that margin will be at least double digit in the quarters ahead...

Shobhan Mittal

executive
#46

That is certainly what we're aiming for and hoping for, and we're hopeful it will come to pass.

Speaker

unknown
#47

Vishal Shah from Wealth has the next question.

Analyst

analyst
#48

Could you put a number on the October export order in terms of the cubic meter value market? And what should we expect for export volume? And what share is now going outside the Middle East for exports?

Shobhan Mittal

executive
#49

I'd say that right now, roughly 85% of exports are headed to the Middle East. We do have some exports going to Southeast Asia as well as to Sri Lanka. However, that volume isn't particularly large. To give you a figure for what my opening order book looked like at the start of October, I had approximately 13,000 cubic meters of export orders that were pending. But since the freight situation is volatile week to week, and beyond the fact that customers are prepared to pay more for freight, availability is an even greater concern. The container situation shifts quite drastically. And availability has been a bigger worry than merely the freight cost. Even when the customer is willing to take on or accept the higher sea freight, we haven't managed to source containers from the shipping lines. As a result, we haven't been able to execute the full quantity we had at the beginning of October.

Analyst

analyst
#50

The price for the 300 cubic meter...

Shobhan Mittal

executive
#51

Could you say that again?

Analyst

analyst
#52

Regarding that export order book, the figure cited was 13,000 cubic meters as October cubic meters...

Shobhan Mittal

executive
#53

You're talking about value...

Analyst

analyst
#54

Yes.

Shobhan Mittal

executive
#55

If we look at it per cubic meter—well, I’ll give it to you on an FOB basis. And again, product mix plays a role here, among other things. Take a basic product, 18 millimeter: at today’s market price, you’d be looking at roughly $200 to $220 for each cubic meter...

Analyst

analyst
#56

Cubic...

Shobhan Mittal

executive
#57

I'm not referring to Himanshu — I don't believe we have a distinct figure for that, do we?

Himanshu Jindal

executive
#58

No, no — right now the situation is quite different, Vishal. On top of that, export incentives kick in, you receive the EPCG benefit, and so on. Even more significantly, you can keep your lines running without interruption. So it comes down to a value proposition, and given where pricing stands today, I believe we're earning a sufficient amount on export. So that's fine.

Analyst

analyst
#59

But when it comes to margin, could you put some numbers on that?

Himanshu Jindal

executive
#60

At this moment, that’s not something I’d want to pursue. Still, yes, I’d say conditions are somewhat improved compared with where we stood earlier—markets keep shifting. Expenses shift daily. As Shobhan said, it also depends on the product and the region; some regions are profitable, correct? So many factors need review. Right now, there isn’t a single combined answer on this specifically.

Speaker

unknown
#61

Saurabh from Capital has the next question.

Analyst

analyst
#62

Regarding CapEx, I understand that no CapEx is planned for the coming years. But on a sustainable basis, could you guide us on what GFA or net assets you think would be in the business going forward?

Shobhan Mittal

executive
#63

I'd say I'm optimistic that, with the product mix we have now and by optimizing a bit as the value add kicks in and operating leverage starts to take effect, we ought to be able to hit the 1.3x to 1.5x figure.

Analyst

analyst
#64

That figure you're mentioning is a sustainable one, correct?

Shobhan Mittal

executive
#65

Correct — capacity.

Analyst

analyst
#66

Right. Great. And can you give us a figure — what's our present share of the market in the mix where we compete? Have we done any work on that?

Shobhan Mittal

executive
#67

Yeah, so I'd put it this way — at this point, I'd say our market share ought to land somewhere in the neighborhood of 23% to 25%, roughly.

Analyst

analyst
#68

That's great. And then just last...

Shobhan Mittal

executive
#69

You mean domestically, correct? I'm assuming you mean domestically.

Analyst

analyst
#70

Yeah, domestic. Just one final question on that front — so what CapEx are the other players bringing in, in both the organized and unorganized space, say for the next 2 to 3 years, if you have that?

Shobhan Mittal

executive
#71

I've run the numbers on this. To give you a concrete figure, what I'd point to over the coming 2 years is additional — when you mention CapEx ramping up, my answer is going to be in volumes — so in my view, that would mean roughly 800,000 to 900,000 more, across the next 2 years, of cubic meters per year.

Analyst

analyst
#72

Great. And with all that supply coming in, do you see any beat on the realization overall...

Shobhan Mittal

executive
#73

Look, I'd argue that since realization is already sitting at a low point, further price cuts by anyone — for that matter — just wouldn't be sustainable. And particularly when you factor in the new company coming in, which probably has a debt load it needs to service, selling below where prices stand today doesn't strike me as practical. Beyond that, I think what we've seen across the past 2 years is capacity additions running at certain levels, right? But that's now starting to settle down. It won't continue the same way. So yes, oversupply will persist for the next — I'd say at least the next 2 years — and that will bring pricing pressures, or oversupply. But that gap should narrow at a faster pace as we move forward.

Speaker

unknown
#74

Our next question comes from Neha at Nuvama Wealth Management.

Analyst

analyst
#75

I have a few questions from my side. The first one concerns the industry. Near the end, you mentioned that you don't expect pricing to hold up past a couple of quarters — yet even so, in quarter 2 we witnessed a sharp correction in prices, and whatever price increases occurred in Q1 were almost entirely passed on. How should we interpret this industry? Are you actually seeing any exits by the smaller players, or is there still the balance sheet trend that could continue for a couple more quarters? How should we read into it?

Shobhan Mittal

executive
#76

I'd say it's getting harder and harder for the smaller multi-day press operations to keep going. There's a fair amount of shady practice in the industry, particularly among the unorganized segment, where they basically just add color to a standard grade product and then sell it as a moisture resistant or high-density product — and that's what's letting them stay alive right now. That said, with the various initiatives the industry is undertaking and BIS coming into play, those sorts of practices aren't sustainable over the long term. And what that means is some players will either get absorbed by the bigger players or go out of business. But to put it bluntly, if that's what you're asking me — I know of examples, like a company that has both a multi-day press and a continuous press at the same time and has decided to halt production on the multi-day press and production on the continuous press. So things like that are happening. Is that your question? Is that what you were asking...

Analyst

analyst
#77

Even so, I'm still trying to get a picture of how much longer it could take before those capacities are fully cleared out of the system. And when might we see some stability when it comes to pricing? I mean, even looking at the top players, the competitive intensity looks very high to me. At what percentage of utilization can we actually see that easing out is the main thing that all of us are trying to...

Shobhan Mittal

executive
#78

Different companies, of course, have their own breakeven points, so to speak, and their own utilization levels. Even with the customer mix I currently have — OEMs plus exports, which bring in less money — I sit at roughly 50% to 55% utilization, right, along with whatever margins I'm getting. Some companies running at a considerably higher utilization aren't all that far away, for that matter, in terms of...

Analyst

analyst
#79

When it comes to Cyclone, could you put a number on the impact from the cyclone that struck us?

Shobhan Mittal

executive
#80

Nope. The single factor that hit us was this: the volume of raw material we'd intended to buy during this month so we could build up inventory — that we couldn't get, owing to disruptions in supply.

Analyst

analyst
#81

Yet sales saw no impact.

Shobhan Mittal

executive
#82

Sales weren't impacted at all, I'd say. Our production wasn't affected in any way. We were fortunate enough to have...

Speaker

unknown
#83

Our next question comes from the line of Parekh with Anand Rathi.

Analyst

analyst
#84

I’ve just got a single question. In Q2 FY ’27, what portion comes from OEM? And how do you expect the OEM share to trend in H2 FY ’27 and in FY ’28?

Himanshu Jindal

executive
#85

So OEMs were sitting between 25% and 30%, correct? This particular year, the first OEMs came in at 15%. The way we look at it, perhaps we ought to return to normalized figures fairly soon, with the emphasis around...

Analyst

analyst
#86

So you mentioned last year that for H1 FY '26 it was 25%...

Himanshu Jindal

executive
#87

Correct. That figure was 25% — in some quarters it even came in a bit above that — and I believe we can return to those more normalized levels. Right now we sit at 15%, and with retail expanding the way it is, well, yes, I'd say 20% to 25% is achievable.

Speaker

unknown
#88

Our next question comes from Arun Baid at ICICI Securities.

Arun Baid

analyst
#89

When might that growth become visible, since smaller players view the stock as a company—when can we see that 15%, or at least the industry growth...

Shobhan Mittal

executive
#90

What we're hoping is that by the next quarter, or the one after that, we ought to reach that level. We've placed a lot of emphasis on the retail side; several factors drove the degrowth, as we noted earlier. But naturally, with luck, in the quarter now underway or the following one, we should be able to — during this current quarter, we should be at...

Arun Baid

analyst
#91

Looking at the pricing situation today — since wood isn't likely to rise much, and chemicals will hopefully decline or hold steady where they are — at that 15%, is it fair to expect margins to be at least the...

Shobhan Mittal

executive
#92

Sorry, what are the margins expected to be?

Arun Baid

analyst
#93

If we do that at 15%, it lands in the teens — I won't claim very high teens, but yes. And the second point is on the OEM side, since 15% of the business is being affected. Do you expect that figure to at least show growth by the end of this quarter? I don't have the numbers for Q3 of last year's business — I don't know the base.

Shobhan Mittal

executive
#94

If you look at last year, starting in quarter 2, the OEM figures were pretty significant. In quarter 2, we hit 28,000. In quarter 3, I believe we were somewhere around 25,000 to 26,000 — not certain on the exact figure. So last year those numbers were indeed substantial.

Arun Baid

analyst
#95

40% of sales, right?

Shobhan Mittal

executive
#96

From what I recall, Himanshu said we came in near 25% of sales for last year.

Arun Baid

analyst
#97

One thousand two hundred fifty…

Himanshu Jindal

executive
#98

Is that right?

Shobhan Mittal

executive
#99

Correct.

Arun Baid

analyst
#100

So in that scenario, should we expect that figure there...

Shobhan Mittal

executive
#101

What's also taken place is that, for instance, newcomers are entering South India with new plants being built, and they are purchasing, correct? So competition has definitely gone up in that segment. Therefore, for me to say we will return to that level — I think predicting that is somewhat difficult right now...

Arun Baid

analyst
#102

On the realization side, I just looked at our Q1 realization — and I'm referring only to the domestic business — it's down roughly 7-odd percent for the PP. With the price decline at 15%, I get that, but is there any specific reason, because it seems fairly decent...

Shobhan Mittal

executive
#103

A lower blended percentage of OEM sales has played a part in that. On the retail side, we've grown.

Arun Baid

analyst
#104

The first quarter should look comparable, correct? -- the OE figure was quite large. Growth for Q1 came in at 15%...

Shobhan Mittal

executive
#105

But in Q1, weren't we also implementing that price increase?

Arun Baid

analyst
#106

No, the drop from Q1 to Q2 is just around… it declined by roughly 15%, I'd say…

Shobhan Mittal

executive
#107

Arun, I'd also say that comes down to product mix. Our emphasis has been on growing sales of pre-laminated products...

Himanshu Jindal

executive
#108

So a number of different things have been happening.

Operator

operator
#109

The next question comes from Anubhav Goel with Cosma.

Analyst

analyst
#110

You brought up that competition is intensifying in the South — we've always had the Rush plant next door, and now the Action plant in Gujarat was commissioned in October. So does that mean the pressure on us in particular will be greater than what we've dealt with up to now? What I'm saying is that pressure is going to get considerably tougher for us in 3Q and 4Q.

Shobhan Mittal

executive
#111

And it won't be limited to us — it'll apply to everybody. I mean, more volume in a given zone would certainly create pressure. There's no question about that. But does that then turn into pressure on pricing? I mean, I can't say at this point, given the levels where we currently sit. And I mean, my general sense is that Action isn't a company that does a lot of undercutting and so on.

Analyst

analyst
#112

The pricing is reasonable enough, though it will likely be a while before we see volumes pick up…

Himanshu Jindal

executive
#113

That's right.

Shobhan Mittal

executive
#114

All right. But look — I mean, even now, a lot of the — I mean, we're sitting at 50, and some companies are at 60 or 70. So even today, for that matter, oversupply is what's prevailing. Volume pressure exists everywhere across the country, even today, for that matter.

Analyst

analyst
#115

And sir, what share do you currently hold of VAP volumes, such as HDMR prelam? Because from what I understand, cracking these architect and contractor channels takes time and is somewhat difficult to do.

Shobhan Mittal

executive
#116

Look, as a company today, we're not saying — sure, our focus is on growing value-added products. But right now, the priority is to push whatever volumes we can, because as a company we have surplus volumes. Anything that gives me contribution, I want to sell. That's my focus at this point in time as a company.

Analyst

analyst
#117

So sir, at the moment, that figure would sit at perhaps 30%, 40% of...

Shobhan Mittal

executive
#118

Himanshu, could you go ahead and share...

Himanshu Jindal

executive
#119

Right, right. So in the first half, volume terms came in at 43%, 44%. In value terms, it had to be near 55%.

Analyst

analyst
#120

All right. Great. Great. And sir, that figure will most likely remain. We anticipate that 55% figure will remain...

Shobhan Mittal

executive
#121

The volume figure will remain, yes.

Operator

operator
#122

Our next question comes from Agarwal, an individual investor.

Speaker

unknown
#123

I just have a few questions. I'd like to get a sense of — if someone were building a facility like ours, what would it cost to set up that kind of operation? I'm basically trying to figure out the replacement cost of that...

Shobhan Mittal

executive
#124

All right. So when you mention that our capacity right now is nearly — I'd put it at roughly 2,800 to 2,900 cubic meters per day — that works out to almost 900,000 cubic meters per annum. What I'm hearing at this moment, for instance, is that the plant a company such as Exor recently built for around 300,000 — sorry, built for around 250,000 cubic meters. That ran about INR 800 crores to INR 850 crores...

Speaker

unknown
#125

So that would be a solid figure to keep in mind for 900, or at the very least 2.5x at the minimum...

Shobhan Mittal

executive
#126

My apologies — I didn’t catch that.

Speaker

unknown
#127

Per each 100,000 at 2.5x...

Shobhan Mittal

executive
#128

It also hinges on how the line is set up, correct? When you enlarge a single line, the expense doesn't rise proportionally. Take my 1,200 cubic meter line versus the 600 cubic meter one — it didn't run me twice as much. It may have run roughly 25% to 30% higher, say, during the same period of the year. As the product scales up, it becomes, say, less expensive per unit of output.

Speaker

unknown
#129

Is that why you're saying it's because of economies of scale?

Shobhan Mittal

executive
#130

Yes.

Speaker

unknown
#131

That covers one piece of the question. Now for the second piece: if you simply put us up against bigger companies — though they might not be big when it comes to MDF, but larger overall — and the organized players out there, their margins haven't dropped to the same degree as the results we reported last year — just last week, at 15% margins at the EBITDA level. Why such a wide variation? I get 1% or 2% here and there, but why would the gap be that large...

Shobhan Mittal

executive
#132

The gap comes down to 2 factors, I'd say: significantly greater capacity utilization at Greenply, and second, a far larger share of value-added products rather than plain MDF, since at the end of the day they're producing roughly 17,000 to 18,000 cubic meters a month, if my memory of the figures serves. So for instance, suppose I sell 15,000 cubic meters of HDMR, in theory, out of the 40,000 domestic volume I move, versus selling 8,000 or 9,000 out of that 18,000 — the margin impact of that is substantial. And naturally, they have — they're benefiting from operating leverage given the smaller size of their plant, which means they operate at a higher capacity level.

Himanshu Jindal

executive
#133

May I add something beyond the play — there are 2 additional players in the listed space whose results have come in. If you look at the quarter 1 figures, this is what emerged. We reported what we reported for India, which was 10%, 10.5%, while the other 2 players, with larger capacities than the ones you mentioned, were running at 5% EBITDA margins. That's what appears in their own investor presentation. So there is definitely some pressure stemming from costs, which are fairly elevated right now. Please keep in mind that all the other players in the listed space are operating at a much higher capacity than we were, and now, with things happening more in quarter 2 in terms of price drops, et cetera, there is obviously some pressure on margins, which we hope to offset through additional volumes and whatever we can do on consumption parameters, efficiencies, et cetera. Does that answer your question, Praveen?

Speaker

unknown
#134

Yes, it does, indeed. May I pose one additional question?

Himanshu Jindal

executive
#135

Yes, go ahead.

Speaker

unknown
#136

I mean, this is really about industry volumes overall. I get that for somebody, a facility takes at least a couple of years to set up. And all of these—whether it's banks—these facilities must have been planned at the peak of the cycle. And now, since we're closer to the bottom of the cycle, do you see anybody—I mean, if I do the simple math on ROC, I can't even put up a new facility.

Shobhan Mittal

executive
#137

Honestly, I think everybody's puzzled and asking themselves why we chose to build plants right now — even the folks who are in the process of coming online. So your assumption is fair: at this moment, people are going to think it over several times before they commit to setting up an...

Speaker

unknown
#138

To build on that point — suppose we look ahead roughly 2 years. If we take that slightly longer 2-year horizon, where do you figure industry utilization levels would land? My guess is that at present we're running at about 3.5 million CBM per year, roughly speaking. Yes, for the industry overall. Yes. And should we be expecting volume growth of 15% to 20% to keep going...

Shobhan Mittal

executive
#139

Regarding industry — yes, I believe that can be sustained.

Speaker

unknown
#140

On the industry side, regarding the volume, I know you brought up the new 800,000 CBM. Beyond that, is anything else coming over the next 2 years?

Shobhan Mittal

executive
#141

Nothing — I'd say nothing of substance...

Operator

operator
#142

Moving on, our next follow-up comes from Madhur Rathi, who is with Counter Cyclical Investments.

Analyst

analyst
#143

Could you clarify what capacity utilization the industry is currently running at?

Shobhan Mittal

executive
#144

My assumption is that, on average, it should land at roughly the 70% mark.

Analyst

analyst
#145

Understood. Sir, regarding imports, from which nation does India bring in MDF...

Shobhan Mittal

executive
#146

Mostly out of Southeast Asia — Thailand and Vietnam.

Analyst

analyst
#147

Understood. And, sir, how does raw material sourcing there compare with what happens in India? Because from what I gather, after COVID, quite a lot of hardwood pulp was planted in India, and the benefit from that ought to show up either this year or next year. So how should we think about gross margin for Greenpanel going forward? Is it possible for us to get back to the earlier 40 — mid-40, like high 40s, cost of goods sold, if you could help us understand?

Shobhan Mittal

executive
#148

On raw materials, we've been seeing things level off during the last few months. And there's also the fact that the industry has shifted toward other kinds of raw materials and reduced its reliance on one single species such as eucalyptus, and that too has led to somewhat lower price escalation for raw material overall. So our estimate is that, going forward, raw material prices ought to stay stable or, to some degree, even begin to correct slightly. That's what our — I'm not sure whether you're asking me about the raw material situation for the importing companies or for the exporting countries.

Analyst

analyst
#149

No, sir. You’ve answered my question. And sir, it looks like the raw material for imports from Thailand is the rubber plant. So how does that work — is there a problem there, or could you...

Shobhan Mittal

executive
#150

Thailand, in my view, doesn't really have an abundance of rubber plantations or anything along those lines. Their supply of raw materials has been fairly sustainable. There haven't been any major capacity additions on the manufacturing side. So their prices have stayed relatively stable, especially when you compare that with the volatility we see in India, or that we've seen in India...

Operator

operator
#151

We’ll take the next follow-up question from Keshav Lahoti at HDFC Securities, who is on the line.

Keshav Lahoti

analyst
#152

Let me share a few figures with you.

Operator

operator
#153

Could you talk a little louder, please?

Keshav Lahoti

analyst
#154

Yeah, just one data point — what were OEM sales in H1 and in quarter 2? And what's the EPCG benefit for this quarter?

Shobhan Mittal

executive
#155

Himanshu, go ahead and address that.

Himanshu Jindal

executive
#156

Right. So OEMs account for 15% of domestic volume — and you have the domestic volume figures for quarter 2 and the first half, which come to 100,000 in quarter 1 and 13,000, for a total of 23, with 15% of that being OEM. On your second question, EPCG for the quarter stood at roughly INR...

Operator

operator
#157

That brings us to the end of the Q&A for today, everyone. At this point, I'll turn things back to the management team for their closing remarks.

Shobhan Mittal

executive
#158

Appreciate all of you being on this call. We’re looking forward to talking with everybody on the next one. Should anyone have additional questions or need clarification, please don’t hesitate to get in touch with us. Thanks, and happy Diwali to all.

Operator

operator
#159

Much obliged. That brings this conference to a close on behalf of Greenpanel Industries Limited. We appreciate your participation, and at this point you are welcome to disconnect your lines. Thank you.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Greenpanel Industries Limited transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.

Get the API View API docs →

This call discussed

For developers and AI pipelines

Programmatic access to Greenpanel Industries Limited earnings transcripts and 132,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Greenpanel Industries Limited or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.