Orion S.A. (OEC) Earnings Call Transcript & Summary
November 5, 2026
Earnings Call Speaker Segments
Chris Kapsch
executiveThanks, Dylan. Good morning, everyone. I'm Chris Kapsch, VP of Investor Relations at Orion, and I'd like to welcome you to our discussion of the third quarter. With me on the call are our Chief Executive Officer, Corning Painter, and our Chief Financial Officer, Jon Puckett. We released our third quarter results yesterday after the markets closed, and a slide presentation has been posted to the Investor Relations section of our website. We'll be referring to that deck during the call. Before we get started, we're once again required to remind you that certain comments made on today's call are forward-looking statements. The remarks we make today carry risks and uncertainties outlined in the company's SEC filings, so results in practice could end up different from what we describe on this call. Also, every forward-looking statement reflects circumstances as they stand today, November 5, 2026, and Orion has no duty to refresh any of them should new situations arise or expectations change. If we discuss non-GAAP financial measures on this call, you'll find reconciliations to the closest comparable GAAP measures in the tables accompanying our press release and/or the quarterly earnings deck. Please don't treat any non-GAAP figures in these materials as substitutes for the GAAP-required measures. With that, I'll hand things over to Corning.
Corning Painter
executiveMorning, everyone, and thank you for joining us. I'll jump right in: adjusted EBITDA and free cash flow for Q3 are shown on slide three of the deck, with free cash flow reaching $46 million. First thing, we'd like to point out a benefit in the Q3 results related to the timing of our European emission allowances, which were finalized and issued only during Q3 — exactly as we indicated earlier this year. Recognition of these credits was delayed because the EU failed to meet its own statutory deadline for approving new industry benchmarks. Those benchmarks have now been established and will remain in effect for the next five years. Because allowance credits are recognized once a year, booking them in < > provided an unusually large lift during this quarter. A clearer view comes from our year-to-date adjusted EBITDA of $171 million, which mostly balances Q3 against the belated credits that were absent earlier in the year. The overall impact of this has consistently been incorporated into our full-year 2026 adjusted EBITDA guidance. Notably, all of this coincides with free cash flow, which was outstanding this quarter—a genuine achievement considering elevated oil prices. Net leverage finished the quarter at 4.1x, 30 basis points below the prior quarter. In light of how we have performed thus far, we are increasing the midpoint of our adjusted EBITDA guidance range. We are likewise standing behind our projection for free cash flow across the full year, and that projection points to free cash flow being positive even though we anticipate earnings will be at a trough, notwithstanding the oil price swings seen lately. Turning to what lies ahead, although it is premature to offer formal guidance for 2027, we do anticipate adjusted EBITDA will be higher next year, and free cash flow will be positive as well. Our confidence in saying this rests on the many steps we are taking to lift results, and those steps are laid out on slide four of the deck. In our view, the uncertain environment today presents a chance for companies that are nimble, and at Orion we are drawing on our agility to do precisely that. Safety comes first on that list. Here at Orion, safety is deeply embedded in our culture. As we look at the period through October, we're still on course to deliver yet another year of safety results that lead the industry, and that includes having zero lost-time incidents. < > to the Orion organization for staying watchful on this fundamental principle. Quality is another area where we're moving forward. < > Task Force certification at our conductive operations in Europe. For automotive, the IATF certification is the benchmark that confirms quality management systems. In our situation, this recognition has additionally acted as a spur to refine the customer mix that this site serves, given that wire and cable as well as battery customers are basically competing with one another for product allocation. On a wider level, we've carried out a range of measures that are boosting how competitive we are in the region. One clear illustration is an initiative in procurement centered on feedstocks. Oil price volatility has made for a turbulent environment, producing numerous crosscurrents and relative disparities among various feedstock categories and supply chains. At Orion, we are turning this situation into an opportunity; we place a strong regional focus on sourcing, which involves qualifying substitute feedstocks, and that is delivering not only savings in procurement but also better yields and net productivity gains; such efforts contribute increasingly to our P&L, especially given the present disruption in global supply chains, and we expect to build on this in 2027. On the operations side, we're confident there's a lot of room to expand margins, and our manufacturing excellence program continues to scale up—we're taking the early wins from certain plants and applying them at other manufacturing sites around the world, and we expect those broader efficiency gains to feed into our profit recovery story. As we said last quarter, boosting overall plant reliability is what enables the structural improvements we're making in working capital. Even with oil prices much higher than a year ago, we still expect positive free cash flow this year thanks to these improvements. We keep finding new opportunities to strengthen overall free cash flow, and that money will go toward paying down debt. Capital expenditures are, naturally, one way we can boost free cash flow conversion, and you should anticipate that we will prioritize even further our CapEx outlays toward reliability at the assets that contribute the most. Working capital is another avenue. In this area, adjusting our payment terms and keeping inventory steadily lower have mattered significantly in generating improvement. We're additionally revisiting how we optimize cash taxes. Taken together, these initiatives are building momentum, and we anticipate added effects in 2027. Last, we keep assessing our production network for further opportunities. Turning to the industry environment, tire imports into the U.S. and Europe have declined. Current duties are making a difference, and additional ones may be on the way. As an example, the EU has announced extra tariffs tied to the anti-subsidization probe on those tires, taking effect next month; meanwhile, in the U.S., the United Steelworkers Union has filed a petition seeking further relief from tire imports under Section 201. The recent jump in Chinese feedstock and carbon black costs might also contribute to these dynamics. These trends are highlighted in the appendix. To be clear, our attention is on the self-help steps within our control; with that high-level summary done, I'll hand the call to Jon so he can walk through the Q3 results in greater detail.
Jon Puckett
executiveThanks, Corning. If you look at slide five, I'd like to draw your attention to the key takeaway located at the bottom of the page. As we've said repeatedly — and I want to be clear on this point — the whole of our organization is concentrated on enhancing cash flow, and our top financial priority at present is producing cash in order to reduce debt and deleverage; we're very pleased with the $46 million in free cash flow we generated this quarter, particularly given volatility in oil prices. It's clear our working capital improvement efforts are having an effect and moving the needle, and that shows up in these metrics, including the ratio, which improved as well, to 4.1x from 4.4x in the prior quarter. Returning to the top of the slide. Adjusted EBITDA came in at $67 million in Q3, a rise of 16% year-over-year. As Corning said, our adjusted EBITDA takes in the annual EU emission allowances that we received during the third quarter. Because of how EU emission allowances work, we must recognize them when we receive them from the EU instead of accruing for them across the year. Since this annual allowance is directly tied to production levels at our European plants, which essentially operate 24/7, and because there is an inherent timing mismatch between our monthly production costs and the annual allowance we receive, that mismatch pulled roughly $17 million of the benefit into our adjusted EBITDA for Q3. To put the quarterly timing impact in perspective, had the benefit of the annual EU emission allowances been recognized more evenly across the year, our third quarter adjusted EBITDA would have come in closer to $50 million, while our first half adjusted EBITDA would have been roughly $10 million higher. Importantly, our year-to-date adjusted EBITDA of $171 million is not materially affected by this timing difference. Similarly, without the timing impact related to recognition of those allowances, our implied Q4 guidance would be roughly $5 million higher. This is strictly a P&L timing issue and does not affect our free cash flow metrics at all. Moving to slide six, adjusted EBITDA for our Specialty segment came in at $25 million, up 18% year-over-year in Q3, driven primarily by favorable mix, with strength from premium grades serving the coatings market and the wire and cable market, along with the combined effect of and pass-through effect. Specialty demand during Q3 on a sequential basis, and they were down 8% year-over-year. Demand in the Western region weakened, most notably in polymers and distribution channels. Our view is that customers in these regions are drawing down stock, since their purchasing priorities have moved away from ensuring supply security and toward accumulating expensive inventory, as the Middle East conflict keeps generating volatility in oil-based feedstocks. For the year to date, adjusted EBITDA in the Specialty segment stands at close to $92 million, an increase of roughly $25 million, or 37%, versus the prior year, and the biggest year-over-year contributors were favorable mix along with the pass-through effect of raw materials. A small amount of forward-looking commentary here: we anticipate modest Specialty results in Q4, reflecting more pronounced fourth quarter seasonality and destocking. We also anticipate elevated turnaround activity and the costs tied to it in Q4, since we shifted turnarounds later in the year so we could capitalize on strong demand earlier on. As for 2027, there are multiple levers for driving Specialty segment performance, among them product mix upgrades and < > initiatives. On slide seven, adjusted EBITDA for our Rubber Carbon Black segment came in at $41 million, up 15% year-over-year in Q3. Timing effects from emission allowances combined with pass-through of higher raw material costs more than compensated for lower annual contract pricing and an unfavorable regional mix. Rubber Carbon Black shipment levels fell 4% compared with a year earlier. Demand in EMEA was somewhat firmer, but that improvement was outweighed by declines across the Americas and APAC. The EMEA increase reflected the same resilience observed in that region's replacement tire market, whereas North American tire build rates have yet to bounce back. A bit of forward-looking commentary now. We expect subdued results for the Rubber Carbon Black segment in Q4, driven largely by lower contracted pricing versus a year ago and stronger fourth-quarter seasonality, as well as turnaround activity and the costs tied to it. Looking to 2027, we see several levers to improve segment performance, including further gains in plant reliability, advantages from feedstock sourcing initiatives, and sustained spot market strength, particularly in North America. Slide eight revisits a lot of the ground we've already gone over regarding free cash flow, working capital, and where we stand financially. CapEx came down from the prior quarter in Q3, and that gave a lift to our cash flow results for the period. We ended the quarter with net debt of $918 million and a leverage ratio of 4.1x, measured against trailing 12-month adjusted EBITDA. Liquidity totaled $193 million as of quarter's end. After Q3 wrapped up, we added to that liquidity by unwinding favorable cross-currency and interest rate swaps linked to our European term loans, taking advantage of good market conditions and realizing $27 million of value embedded in those instruments. That step reflects how we manage risk proactively and keep our attention on the balance sheet. With that, I'll hand the call back to Corning.
Corning Painter
executiveThanks, Jon. On slide nine, we’re sharing updated guidance metrics, and those include narrowing our adjusted EBITDA guidance toward the high end of the prior range. Our free cash flow guidance is unchanged, though we would have raised the low end of that range if not for < > prices. We’re still on track for $90 million of capital expenditures in 2026, which is a $70 million reduction versus last year. And finally, the implied Q4 EBITDA expectations reflect above-normal seasonality in both segments < > schedules that Jon mentioned. Moving to slide 10. To sum it up, we delivered $171 million of adjusted EBITDA year-to-date; we delivered on free cash flow, and we did that despite the tumult in the world. We are determined that 2026 will be our trough year, and that in 2027 we will return to growth. We’re not relying on the market. We are taking action on the things we control to drive improvement going forward. We appreciate your interest in joining us today. With that, Dylan, let’s open up the call for Q&A. Thank you.
Chris Perrella
analystHey, everyone. Chris Perrella here, sitting in for Josh. Looking at Q4, is the softness coming from more destocking in both segments, leaving aside the EU credits? Or are prices falling too? Are margins getting squeezed in Specialty? Could you elaborate on that a little? And then I've got a follow-up on inventory.
Corning Painter
executiveSure. Yeah. No, it's really just — picture yourself as a masterbatch company or some other manufacturer downstream of us, and maybe many of your feedstock prices are tied to oil — nobody really wants to hold much inventory. Look, if you were holding inventory, what unfolded across the past two days would be wonderful — actually, let me correct that: it would be a disaster if you were holding inventory, right? The price simply dropped. You purchased at a high point, and now it costs less. My sense is that folks are extremely wary about carrying any stock at all, whereas perhaps during Q2, people were deeply concerned about supply and about what might happen and this and that; for us, this isn't a margin problem. Buyers are indicating they're being very careful; they've consistently provided us with quite short forecast windows and conveyed limited visibility regarding the more distant future. Still, what we're hearing from customers is that they're fairly wary about November and about where they'd like to land in December.
Jon Puckett
executiveAnd Chris, one more thing I'd tack on there: turnaround timing also plays a fairly large role in our fourth quarter. We did that deliberately. We moved turnarounds to the end of the year so we could capitalize on the demand strength from earlier in the year, so the effect is quite significant. Another piece we've discussed throughout the year is annual contract pricing in Rubber Carbon Black, and it's in line with what we saw in previous quarters. That comes to roughly a $10 million price impact. So that margin is there, but it's a continuation, nothing new on that front. And going back to earlier this year, when you saw that surge in demand at the start of the war, I think we all worried that eventually the consumer would run out of gas, so to speak. We wanted to make product while conditions were favorable, since there was this worry that demand would get destroyed at some point. So we deferred it, and overall, we feel pretty good about that.
Chris Perrella
analystDoes the turnaround effect break down evenly across the two segments? And following up on inventory, how low is it compared with normal, and are you able to move it? I understand you're aiming to generate cash. Is there additional water to be squeezed from that sponge?
Jon Puckett
executiveYeah. As for the turnaround timing, it leans more toward Specialty than Rubber Carbon Black. It's probably 75% Specialty, 25% Rubber; then on inventory, yes, that will be somewhat mixed by geography. There are certain parts of the world where we can take a bit more, I don't know, bring safety stocks down, and that's likely in Europe. In the Americas, where we've seen considerable spot demand, we'd likely be somewhat more cautious there.
Chris Perrella
analystOkay. Thank you.
Jon Puckett
executiveThanks, Chris.
Analyst
analystHello, Saurabh here, sitting in for John Roberts. Thanks for taking my question. To start, could you break down how much of the EBITDA impact comes from the raw material pass-through and how much from the EU allowances?
Jon Puckett
executiveWe did break out the allowances separately, and that figure is roughly $17 million. So you can work it out, Saurabh, the division is approximately 30% Specialty and 70% Rubber; since we've presented the combined impact, I believe you can derive the remaining math from there.
Analyst
analystOkay, got it. When it comes to the contract discussions for next year, could you share a few hints and give us some flavor of what lies ahead? Are customers giving you any reason for optimism?
Corning Painter
executiveYes, of course. Let me take that one. First off, since this is commercially sensitive, I'm limited to fairly high-level comments; and beyond that, let's say that of the Rubber Carbon Black we sell in total to the tire industry, about 50% is under contract. Keep in mind, we have one major customer, and with that customer there is genuinely no negotiation. You might have caught some remarks earlier this week from a competitor who mentioned that tire imports are down and manufacturing hasn't moved much. Let me be clear: we haven't given up on this issue, we're not in negotiations for next year, and we're pressing hard for a fair price—the right price. Look at all the spot demand that stems from underinvestment, in our view, by certain parties in maintenance. That's what this industry requires, and we're pushing hard for it. I'd add that I'm highly focused on the companies we can partner with, and if our expectations are too far apart in some cases, you know what? We can simply hold back a bit and participate in the spot market. I think that market will be quite strong next year.
Analyst
analystThanks.
Dan Rizzo
analystHi there. Appreciate you fielding my questions. To build on your last point — is the U.S. spot market fairly big? My understanding was that it's mainly contract-based, or at least that's true for North America.
Corning Painter
executiveYes, that's exactly right. Contracted is the traditional way, but here's the wrinkle: when a company hits unplanned downtime and can't deliver, some players do step out into the open market. In Europe you notice it more — there are buyers depending on, say, imported carbon black, possibly at the very low end, not the tire makers themselves, really the very low end. A bit of that shows up in the U.S. too. Take one case: whenever Chinese pricing jumps, we certainly observed certain buyers starting to seek alternative suppliers. Still, for the most part in North America, we chalk this up to unforeseen outages at other companies.
Dan Rizzo
analystAll right. With the productivity gains you've achieved and the reliability you've built, how should we think about incremental margins once a recovery finally happens? Would it be — I mean, how much — I'd assume it would be higher, but how much higher? And along those same lines, how should we think about mid-cycle margins across both segments, really?
Corning Painter
executiveI think our rule of thumb for incremental — what are incremental margins, < > in Rubber Carbon Black, in the 300s. I think that's a margin off of wherever the contract pricing sits in that timeframe. I think I would still use that today. I don't know, Jon, if you have a different.
Jon Puckett
executiveYeah. No, I think that is about right, Corning.
Corning Painter
executiveRight, right. And then when it comes to mid-cycle margins, we really think about it in terms of maybe mid-cycle EBITDA. We anticipate < > then, if you're able to return to a more normalized balance between production levels and import levels in the Americas, you're going to be able to step up significantly in EBITDA within the Rubber Carbon Black segment.
Jon Puckett
executiveMy view is that at a scale somewhere around $50 million to $100 million, you'd be able to increase it gradually over time.
Corning Painter
executiveThe crucial thing about mid-cycle is that it's somewhat distinctive for the tire industry, since such a large share of tire demand is replacement. Tire sales across North America and Europe are good, correct? Trucking is down somewhat due to trucking activity, yet passenger car and light truck are fine. The entire problem has been the import volume there. What we truly require in that segment is a bit of reversion toward the norm as we go forward from where we stand today, rather than dramatically < > replacement tires — that's a consumable, and people are driving.
Dan Rizzo
analystOh, sorry about that. The line cut out a few times. About the U.S. tariffs and the EU anti-dumping measures — are those only having a very small impact at the moment?
Corning Painter
executiveNo, there is an impact. The effect shows up as a decline in imported tires, and it is quite pronounced. That much is visible. What you do not see yet is any real rebound in tire production. I would tie that to the fact that we are working through an inventory drawdown. As we mentioned earlier, people are destocking. No one wants to carry much inventory. Maybe in anticipation of potential tariffs or duties, extra goods were brought in sooner. My sense is we will not truly see that until sometime next year. Still, a decrease in tire imports is clearly there.
Dan Rizzo
analystAll right. Thanks a lot.
John Roberts
analystThanks. Crude prices have dropped sharply over the past couple of days—in both the spot market and 12-month Brent futures. Do you expect that to worsen the customer destocking you mentioned, which you believe is already happening?
Corning Painter
executiveI believe volatility breeds caution. That said, at a lower figure, perhaps buyers will return. Still, you're completely right. We began work on this script a few days back. Present prices, yesterday's prices—it's quite a dynamic moment, and that's partly our message. It's the agile who capitalize on this. So when they switch on, fine, we'll be prepared. All these crosscurrents and raw materials and what's better, what's worse—we're simply trying to capitalize on that during this quite dynamic moment we're in; but I think if crude prices fall, that should benefit the consumer. I think in the end that would be a plus.
John Roberts
analystThanks.
Corning Painter
executiveWell, I appreciate everyone taking the time and showing interest today. Over the coming several weeks, we'll be meeting with investors. There's an NYSE event on our schedule along with a small cap conference in Dallas, and we're eager to share more when we discuss our 2027 and our fourth quarter results call in February. Thank you very much, and enjoy the rest of your day.
Operator
operatorThat brings us to the end of today's teleconference. At this point, you're welcome to disconnect your lines. We appreciate you taking part.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Orion S.A. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.
Get the API View API docs →This call discussed
For developers and AI pipelines
Programmatic access to Orion S.A. earnings transcripts and 132,000+ others is available through the
EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments,
full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.
More tools for stock research
OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Orion S.A. or any ticker on your watchlist.
StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.