RPM International Inc. (RPM) Earnings Call Transcript & Summary

October 6, 2021

New York Stock Exchange US Materials Chemicals earnings 46 min

Earnings Call Speaker Segments

Frank Sullivan

executive
#1

Thanks, Tammy. Good morning, everyone, and welcome to RPM International Inc.'s investor call covering the first quarter of fiscal 2022. On the line with me today are Rusty Gordon, RPM's Vice President and Chief Financial Officer, and Mike Laroche, who takes over as our Vice President, Controller and Chief Accounting Officer on November 1. Previously, Mike served as CFO of our Specialty Products operating — Specialty Products Group operating segment. He takes the reins from Keith Smiley, who retires at the close of this month following almost 30 years of distinguished service to RPM. I'll start with some general observations about how we performed this quarter. Mike will follow with specifics on our financial results, and Rusty will wrap up our prepared comments by discussing what we expect for the second quarter of fiscal 2022. Unless we say otherwise, our remarks will be on an as-adjusted basis. Please be aware that a supplemental slide presentation supporting what we say on this call has been provided. You can find it under the Presentations and Webcast section of the RPM website, at www.rpminc.com. Once our prepared comments are finished, we'll be happy to take your questions. As the third slide of the presentation shows, what we achieved this quarter reflects the advantages of our balanced business portfolio, in which weakness in one segment is usually offset by strength elsewhere. During the first quarter of fiscal '22, 3 of our 4 operating segments — our Construction Products Group, Performance Coatings Group and Specialty Products Group — delivered solid sales and adjusted EBIT growth. Sales across these 3 segments, taken together, rose by over 15%, while their adjusted EBIT climbed by over 14%. That result stands out particularly given the raw material shortages, supply chain disruptions and inflation that every one of our segments and businesses confronts. Because of the supply disruption, we forfeited the equivalent of almost 300 production days at RPM facilities worldwide in the 2022 first quarter — a greater number of days than were lost to COVID-related shutdowns during last year's first quarter. We calculate that consolidated sales took a hit of roughly $200 million in this first quarter from those challenges and disruptions, with more than half of that falling in our Consumer segment. That figure was approximately twice the negative sales effect we saw in the fourth quarter of fiscal '21. Sales and earnings for our Consumer Group fell during the quarter because of these factors, along with a tough comparison against the prior year period, when sales on an organic basis rose 34% and adjusted EBIT gained 122%. Those prior year growth rates were driven mainly by extraordinary DIY demand during the pandemic. Every indicator points to underlying demand for our Consumer products remaining strong, and to the supply and material disruptions the segment is now dealing with being temporary. During the first quarter and early in the second quarter, we made strategic growth investments in our businesses. So on Slide 4, you can see some of what we've done lately — we bought Dudick, we bought Pure Air, and we just picked up a big manufacturing site in Corsicana, Texas. Dudick came into the fold in June, and it lets our Carboline unit solidify where it stands in the secondary containment linings space, thanks to a product line that's well established and trusted, and at the same time it creates an opening for more sales and future growth possibilities worldwide. Pure Air joined us in August, offers indoor air quality service, and fits nicely alongside our Tremco Roofing and Tremco WTI operations. Our plan is to scale Pure Air quickly by tapping Tremco's North American sales team, strategic partnerships and operational infrastructure. On that same slide, there's a picture of the 178,000 square foot facility we bought on 120 acres in Texas. It's going to be a manufacturing center of excellence serving several RPM businesses. The plant is up and running at full capacity, and it comes with a seasoned operating team, which will let us build longer-term resilience into our supply chain, boost fill rates and more readily grow output across a number of our high-growth product lines in the quarters and years ahead. Taking a longer-term macro view, there are plenty of market opportunities and industry trends we're positioned well to capture for ongoing growth and success. Slide 5 lists these market opportunities: First, infrastructure investment needs keep rising, with spending projected at $2.8 trillion worldwide. Our Performance Coatings Group and Construction Products Group offer a huge range of products and services that address that need. Second, the new DIYers the pandemic created are still taking on home improvement projects, using both our core product ranges and our growing sales in fairly new categories such as abrasives and architectural coatings. Third, there's ongoing growth in more holistic connected building envelopes, like the ones our Construction Products Group delivers, making structures more airtight, weather-tight and energy efficient. And fourth, demand for wall systems, such as those built with insulated concrete forms from our Nudura business, which make buildings stronger, more energy-efficient and cut construction cycle time and labor. Industry trends that benefit RPM include consumers nesting and doing more home improvements, school reopenings that call for more maintenance and repair, building owners and facility managers wanting to consolidate construction management with a single source, and a stronger appetite for energy efficiency driven both by cost savings and by the wish to minimize environmental impacts. RPM is positioned well to meet all these trends and grow along with them. Now I'd like to hand the call to Mike Laroche, who will walk us through our segment's financial performance for the quarter.

Michael Laroche

executive
#2

Thanks for that, Frank, and hello everyone. Turning to Slide 6, on a consolidated view, we achieved a sales record of $1.65 billion, up 2.7% against a strong fiscal 2021 first quarter that had itself increased 9.1%. The biggest factor behind this was the extraordinary pandemic-driven demand for home improvement products within our Consumer Group. Acquisitions completed recently accounted for 2.1% of the growth, while favorable foreign currency translation contributed 1.6%, together more than offsetting a 1% drop in organic sales. Adjusted diluted EPS was $1.08, down 25% from the year-ago period, when adjusted diluted EPS had posted exceptional growth of almost 52%. Consolidated adjusted EBIT came in at $206.8 million, a decline of 23.2%. Supply chain issues, inflation, and the tough year-over-year comparison for the Consumer Group were the causes. When you examine our consolidated results on a double-stack basis — comparing fiscal 2022's first quarter with fiscal 2020's first quarter, which came before the pandemic — sales, EBIT, net income and diluted EPS all demonstrate robust growth. This suggests that the pandemic made last year's results somewhat of an anomaly, and throughout the business we're now returning to a more steady level of performance. Serious challenges persist in the form of raw material shortages and inflation. When it comes to safeguarding our margins, we continue to roll out price hikes in places where they make sense throughout every segment, and we're still reaping the rewards of incremental cost reductions tied to MAP to Growth, the operating improvement initiative we wrapped up not long ago. That program keeps delivering value, since we're finding even more operational efficiencies across manufacturing, procurement and administrative business functions. Now let's move to Slide 7. In the first quarter, our Construction Products Group grew faster than any other segment, posting record sales along with record adjusted EBIT. What's particularly striking is its 15% organic growth, considering that non-residential construction put in place — a market indicator relevant to this segment — has fallen 11.6% during this calendar year. On the top line, almost every one of the CPG businesses turned in a solid performance, helped in part by an emphasis on expanding markets like technology and distribution. Among the CPG businesses, the standout performers were the ones supplying commercial roofing systems, concrete admixtures and repair products, and insulated concrete forms. In Europe, this segment posted double-digit top line growth, which was partly a result of the comparison to last year's first quarter, when shelter-in-place requirements reached their peak severity. Our bottom line got a boost from picking up share in the market, running operations better, keeping costs in check, and charging more for what we sell — and together those things did more than offset the inefficiencies in production that came from supply chain problems and higher expenses. If you look at Slide 8, sales bounced back at our Performance Coatings Group, and nearly all of its major business units improved. Some of that increase reflects how soft the comparison was with the first quarter of last year, a period when restrictions tied to the pandemic kept contractors off job sites and sluggish energy market conditions led customers to delay industrial maintenance spending. Bison, the company we recently bought that makes raised flooring systems, turned in strong sales. We saw strong improvement too in emerging markets, plus in industrial maintenance activity that isn't tied to energy. Since consumer packaged goods suffered more than any other segment because of the pandemic, it felt like a positive sign that EBIT rose at a quicker pace than sales despite inflation. Better pricing, added savings from efforts to improve operations, and 2 acquisitions completed recently all lifted earnings. Moving on to Slide 9. Specialty Products delivered its best-ever revenue increase, mostly thanks to units supplying marine coatings, powder coatings, wood stains and sealers, and disaster restoration equipment. We saw a boost in earnings thanks to greater sales volumes and extra savings from our operating improvement program, though these gains were partly counterbalanced by steep raw material inflation, inefficiencies tied to supply chain disruption, and spending on SG&A for future growth initiatives; as a result, SBD businesses keep putting price increases in place. Moving on, on Slide 10, our Consumer Group had a difficult comparison against the prior year for the reasons Frank discussed earlier. During the first quarter of fiscal 2022, supply constraints and disruptions led to production outages that reduced this segment's sales by roughly $100 million. Despite that hit to revenue caused by supply-chain difficulties during the year, the Consumer Group still posted fiscal 2022 first-quarter sales that exceeded the pre-pandemic fiscal 2020 first quarter by 12.3%. Our products face accumulated demand, inventory is thin across many of our channels, and we anticipate those missed sales will be recouped once conditions return to normal. During fiscal '22's first quarter, our earnings declined. Inflation drove up what we paid for materials and labor, and supply shortages reduced our productivity. Some of that was counterbalanced by price increases along with savings generated by our operating improvement program. We're actively making our supply chain more resilient so we can secure the raw materials we need now and going forward. We're also adding manufacturing capacity to meet new DIY demand. While that extra capacity is coming online, for the near term we're paying more to use contract manufacturing so we can keep up with customer demand. At this point, I'll hand the call to Rusty, who will go over our outlook.

Rusty Gordon

executive
#3

Thank you, Mike. Let's turn our attention to Slide 11. When we consider what lies ahead for the second quarter of fiscal 2022, our expectation is that inflation affecting raw materials, freight, and wages will continue, along with the shortages of raw materials and the supply chain difficulties that have been affecting us. On top of that, we were up against another challenging comparison with the previous year, a period in which consolidated sales rose 6% and adjusted EBIT climbed almost 30%, propelled by a 66% gain in adjusted EBIT for the Consumer Segment; we believe price increases, operational enhancements, and additional manufacturing capacity will partly counterbalance these factors. For the second quarter of fiscal 2022, we project consolidated sales will rise by a mid-single-digit percentage. Double-digit sales growth is expected from our Construction Products Group, Performance Coatings Group, and Specialty Products Group. Sales for our Consumer Group are expected to fall by a double-digit percentage, reflecting ongoing raw material shortages and a tough comparison with the same period last year, when demand driven by the pandemic quickly pushed organic growth up 15%. That said, much like what happened in the first quarter, we anticipate the Consumer segment's second quarter sales will exceed its pre-pandemic level, which offers a fair comparison. Although underlying demand for our products and services stays robust, we continue to contend with material shortages and inflationary pressure, meaning adjusted EBIT is projected to decline 15% to 25%. Q2 results will follow a similar direction to Q1, with substantial year-over-year drops once again in our Consumer Group, which is still facing difficult comparisons, alongside double-digit increases in both sales and earnings for our other 3 segments combined. Now let's look at Slide 12. Going forward, our plan is to sustain the positive momentum our operating improvement program has generated as we finish its remaining projects, including the one plant closure that was completed in Q1 of F '22, utilize resources throughout RPM to address supply chain problems and satisfy customer demand, uncover fresh efficiency opportunities through our continuous improvement culture, and invest in avenues for growth, among them capacity expansions. That brings our formal remarks to a close; at this point we would be happy to answer your questions.

Ghansham Panjabi

analyst
#4

Morning, Frank. When you were discussing the Construction segment, you pointed out that revenue was quite robust even though the construction put in place indicator has fallen considerably this year to date. Looking ahead roughly 6 months, does that pattern pose a risk — perhaps a temporary gap in demand? Or is that not something you're seeing right now?

Frank Sullivan

executive
#5

No, I believe strong results will persist there, and really it comes down to the way our leadership team has set up our Construction Products Group. Let me offer just a few illustrations. Our Tremco business, as you're aware, has led the way in roof restoration coatings; these make it possible to extend or continue the useful life of an aging roof by another 10, 15, 20 years at 1/3 of the cost; and if we can secure resins for these roof restoration coatings — and we're moving between standard petroleum-based resins, which in certain cases are hard to come by, and more organic and bio-based resins — they give us an edge both in a growing category and in a situation where, in the current market, removing a roof and waiting on all the components, and in certain instances especially foam-based insulation, is problematic. So I'd say our standing in roof restoration coatings is giving us something of an edge in this environment where materials are constrained. The other spot is the Tremco waterproofing and sealants business. They've led in facade restoration in a way that lets systems be deployed to renovate and repair facades without taking out windows and other construction components. And once more, given the component and supply difficulties we're encountering throughout construction materials, we're finding some benefit there too. So those are only 2 illustrations. In the second quarter and beyond, I'd anticipate not just double-digit sales growth, but also the beginning of modest margin expansion, with EBIT growth at or a bit above the sales growth in our Construction Products Group.

Ghansham Panjabi

analyst
#6

Thanks, Frank. Now, regarding the guidance — during the prior quarter, you provided figures for Q1 as well as Q2, and Q1 definitely landed right where expected. Clearly, Q2 got reset purely because of what happened with costs, scarce raw materials, and so on. Could you assist us in framing how the back half of the year looks, specifically around the trajectory of cost inflation and the way sales losses are mounting due to insufficient raw materials? Give us a big-picture sense of what you currently know and how we ought to view the way the entire year plays out.

Frank Sullivan

executive
#7

Absolutely. Regarding inflation right now, we project that for fiscal '22 in its entirety, total inflation will land somewhere in the high teens — roughly 17%, 18%, 19%. Right now, sitting here comparing year over year, inflation encompasses labor and freight, yet is predominantly driven by materials, and sits 30% greater; much of that stems from materials. A few illustrations you'd recognize. Epoxy resins cost twice what they did 12 months ago. Acetone has climbed 90%. MDI has risen 80%. Alkyd resins have increased 50%. That is, assuming we're able to source them. As you're aware, shortages have occurred, especially tied to an explosion at a plant belonging to a major North American producer of alkyd resin. So that's the landscape before us at present. Our Q2 outlook spans a wide range; and I believe each of these developments can be anticipated. Their effect cannot be anticipated to the same degree. Consequently, what we're watching most closely at the moment is the situation in China, plus some mix of its trade dispute with Australia concerning coal. I think attempts to perhaps address air pollution ahead of the winter Olympics are currently producing an estimated rise in shutdowns of industrial output and electricity. Therefore, that will undoubtedly hurt downstream chemical supply too.

Analyst

analyst
#8

Caleb here, filling in for John — hope that works.

Frank Sullivan

executive
#9

Of course. Hello there, Caleb.

Analyst

analyst
#10

Clearly, we've got some problems in the supply chain. You'd said before, I think, that Evolve by Consumer took a $100 million hit, and that the overall impact was $200 million. Could you put a number on how much of that landed in Q2? You also said that once these supply chain problems are resolved, there would be a snapback. How soon do you think that rebound in demand will show up — is it a one- to two-year window, or does it stretch out a bit further than that?

Rusty Gordon

executive
#11

Yes. As things stand right now, Caleb, Q2 is shaping up to look quite a lot like Q1. We'd anticipate around $200 million in lost revenue, to use that term. Actually, let me be more precise — these aren't sales that vanish forever; on the Consumer side, nearly all of them are simply pushed to a later date. Say someone's got a painting job lined up — sooner or later they'll still need to get it done, regardless of whether a specific shade happens to be unavailable right when they want it. As for our industrial businesses, the majority of those offerings are specified into projects that are already underway. So when supply constraints hit us, chances are our rivals are facing the same thing, and those projects aren't going to stop.

Analyst

analyst
#12

All right. Could you also share any perspectives regarding MAP 2.0 — what kinds of opportunities you're observing there, and in what ways you might aim to expand them down the road?

Frank Sullivan

executive
#13

Certainly. The clearest ones, I'd say, sit in manufacturing; we brought in the MS-168 lean manufacturing and continuous improvement measurements and disciplines; and 60 small- to medium-sized manufacturing facilities remain that we haven't reached yet owing to COVID's disruptions. That factory floor process is quite intensive and hands-on; therefore I'd anticipate benefits in the 10s of millions of dollars once we can get to it. Procurement holds a bit more, though nowhere near the scale of what we saw during MAP to Growth's first round. And then certain elements will be there. I'll tell you that giving specifics on this and truly putting numbers to it has been disrupted by this global supply chain issue. We are getting into our plants, yet the week-to-week and month-to-month battle over supply chain is consuming our attention. We think some of our primary resins will ease up somewhat as we head into November and definitely by spring. Part of that involves locating alternative supply or tollers. Part of that will come from the Corsicana, Texas facility we acquired, where we're standing up some critical resin production. So we're heading the right way on that. And so we'll say more about MAP to Growth 2.0, but our detailed communications on it are going to be pushed back until we truly feel the supply chain challenges are — I wouldn't say behind us, but a bit better managed than they are today. Earlier in the call, I mentioned the challenges in China that we're seeing. That's likely to hit silicones more meaningfully than silicones have already been hit today, as well as some other critical raws. So circumstantial elements keep arising, whether hurricanes or winter storms or now what's coming in China, which worsen an already global supply chain challenge that isn't unique to our industry.

Analyst

analyst
#14

Vincent couldn't make it, so this is Stephen filling in. My question is a fast one about pricing — can you give us an update on what realization looked like during the quarter, and also what you anticipate for the back half?

Frank Sullivan

executive
#15

Absolutely. Given clear competitive reasons, we won't break out pricing by segment or by business. What I can share, though, is that the figures we'd give on a consolidated basis tend to be reliable, within 50 basis points either way, across the majority of our businesses. That covers the pricing we managed to put through in the spring, followed by a second round affecting most of our businesses late in the summer or at the start of fall. So looking at it consolidated, price contributed roughly 4.5% in Q1. That reflects the pricing already put in place — again, spring or fall — with some of it still ramping up. It doesn't assume any further price hikes are needed, though only time will show how the supply problems play out. So Q1 came in at 4.5% consolidated. For Q2, expect around 7.5%; and assuming nothing else shifts — a pretty loose caveat given everything happening with the supply chain — the second-half impact should land somewhere between 8% and 10%.

Analyst

analyst
#16

Then a quick follow-up regarding cash flow. My sense is that Q1 experienced a fairly large decline compared with the same period a year earlier. And clearly, the prior year was perhaps somewhat better than typical; so inventory is what you specifically flagged, yet additional working capital pressures exist too. Could you give us some detail on that, plus your thinking about working capital and where CapEx goes during the second half?

Rusty Gordon

executive
#17

Yeah, certainly; regarding the prior year, demand was robust in our Consumer DIY business. And we managed to satisfy that demand essentially by taking sales from inventory and turning inventory into cash. So our first quarter was outstanding. And moving to the current year, naturally the situation is reversed for Consumer. Sales are falling. And inventory previously had been reduced. At present, we are in fact attempting to accumulate inventory so we can better fill rates and service levels. So looking at working capital, that is essentially the primary factor. And that same pattern holds true throughout our remaining 3 segments; they too are working to establish resilience and accumulate inventory wherever feasible, since supply shocks appear to keep occurring quite often based on how we have performed recently.

Josh Spector

analyst
#18

On the Consumer Products front, you all keep saying demand remains robust, and clearly you aren't alone in that channel making that claim. I'm just wondering what information you're looking at, and perhaps more precisely, what share of your SKU is possibly out of stock as opposed to low stock. So if there's any inventory there, maybe someone will purchase it? Or if that isn't the metric you're tracking, what are you observing that gives you that confidence?

Frank Sullivan

executive
#19

Partly, what we see is unit comparisons against pre-pandemic levels, and those remain solid — up high single digits or low double digits. I won't discuss particular fill rates for individual customers. Yet in the past, we've run at 98%, 99% fill rates, and neither our company nor any rival is anywhere near that; and if we were near that, considering consumer takeaway and what we can't provide due to global supply chain disruptions, we're quite sure we'd move product off the shelves, and that's the issue. It's a problem for us. It's a problem for our customers. We're tackling it in ways we believe leave us competitively well positioned. And we're also confident that once we sort out some of these resin issues and can bring fill rates back nearer those levels, you'll see a solid improvement in revenue growth. But that's the main driver behind the $200 million of estimated lost sales in the quarter, half of which was Consumer. It's simply not being able to satisfy demand and not being near the historically excellent and expected fill rates.

Josh Spector

analyst
#20

Regarding the new Texas facility, you've repeatedly mentioned that consumers need production outsourced. What did that cost us during this quarter, and could you remind us about earlier quarters as well? Does that facility fully solve this, or is it a distinct matter from what you're doing there?

Frank Sullivan

executive
#21

I lack a precise figure for the cost, though we do outsource a considerable amount of filling in certain areas. There's another matter — as we've discussed previously, a plant explosion hit one of our main suppliers, who furnished roughly 30% of alkyd resins across North America and was a major vendor to us. For Rust-Oleum, alkyd resins matter more than they do for some of our architectural paint rivals; therefore we're collaborating with them on external tollers. Each day we're bringing more capacity online. We aren't yet where we must be, yet we're sure we'll reach that point within the coming month or 2, though it comes at a much greater expense. So once we return to a typical supply base and once we handle a share of this — not most of it — at our new plant, above all we'll again be able to satisfy demand and restore the fill rates we all want; after that, you'll likewise see the profitability concern resolved.

Analyst

analyst
#22

This is Cory, filling in for Kevin. If we return to that $200 million figure tied to supply chain and raws, it sounds like the $100 million in Consumer was largely tied to shortages. Could you split out the remaining $100 million either by segment or by the kind of pressure involved — supply chain problems, shortages, or simply raw material availability?

Frank Sullivan

executive
#23

Shortages are behind all of it. Take our Construction Products Group — revenues were strong in the quarter. Even so, we definitely lost tens of millions of dollars in volume there, and the root cause really goes back to the supply chain. There were several situations where a critical intermediate chemical at one of our suppliers kept those suppliers from getting us resins for our roof coatings business, and we're working past that now. In the first quarter, though, we actually ran week long plant shutdowns while waiting on raw materials, and in that instance we're recovering what we lost, since that problem is fixed. Still, you're seeing rising costs along with some availability constraints in silicones. You've seen it with acrylic resins, and you're seeing it with alkyd resins. Sometimes, as with alkyd resins, it's a shortage of a direct raw material that we bought. Quite often, though, it's a critical element of our suppliers' production that's keeping them from getting their products to us on time. So it hit construction products in the first quarter. I believe we've gotten past most of that; unfortunately, we expect disruptions in silicones tied to the China issues I mentioned. That will hurt our Consumer and Construction Product Group, but it's already factored into our outlook.

Analyst

analyst
#24

After that, you brought up having completed certain contract and tolling manufacturing work. Could you walk us through the dollar margin picture on that, plus whatever specifics you're able to share?

Frank Sullivan

executive
#25

No. We haven't given those specifics, except to state that when you examine gross margins within Consumer, or gross margin RPM overall, the largest drop in RPM gross margins during the quarter comes from our Consumer Group, and the EBIT shows it, falling sharply. A big portion of that relates to gross margins tied to material. It isn't just material costs running higher — conversion costs are considerably elevated as well, owing to outside tolling and to supply chain disruptions. Another item that has climbed a great deal, especially within Consumer, is freight. In the past, we'd typically ship just truckloads of product, whereas now at times we're sending less than truckload, and there are interruptions to inbound supply of those chemicals or elements sourced from China. It's probably common knowledge that the port at Long Beach has an enormous backlog. So many different factors explain why these disruptions occurred, producing the sales shortfall we're discussing.

Luke Washer

analyst
#26

Luke Washer here, filling in for Steve. I'd like to revisit the topic of raw materials briefly. It seems a significant portion of the pressure stems from whether those inputs can even be obtained. Yet when you consider broadly increasing prices — and I do value the specifics you gave regarding MDI and proxy resins — what stands out is that I'd expect many of those pricier commodities to be flowing into your Construction Products and Performance Coatings segments, where margins, as I understand it, have held up far better. So, in evaluating how elevated costs in those segments might be counterbalanced by your MAP to Growth efforts, and possibly through acquisitions or shifts in mix, would you say the effect is mostly that mix shift plus MAP to Growth canceling out raw materials, or do raw materials remain a substantial drag within those segments?

Frank Sullivan

executive
#27

Raw materials continue to be a substantial drag in those businesses; however, when we discuss MAP to Growth savings, those are genuine. And I believe back in the spring we mentioned $50 million, Rusty, for the fiscal year?

Rusty Gordon

executive
#28

Oh, yes, definitely.

Frank Sullivan

executive
#29

Additional savings from follow-on actions — those are genuine. It's tough to spot them for precisely the reason you just mentioned. So we do get follow-on MAP to Growth savings. Unlike Consumer, our other segments aren't dealing with conversion cost disruptions, so that's not something we're up against. Plus, we've been successful at securing price increases, and those are the main factors behind why we aren't seeing the same erosion — especially in our Construction Products Group, our Performance Coatings Group, and the EBIT margin that shows up in Consumer.

Luke Washer

analyst
#30

That's really useful. Now, regarding the supply chain, with the disruption you're currently experiencing and also what came from the pandemic, are you approaching your supply chain somewhat differently? And does that affect your future choices around MAP 2.0 and your Texas manufacturing plant, which sounds like it will build more resilience into your supply chain? So are you viewing your supply chain in a new way? And what do you anticipate doing with that moving forward?

Frank Sullivan

executive
#31

That's an excellent question, and at the margins, yes, our thinking has shifted. The facility in Corsicana, Texas lets us build on what we've already been doing with Arnet Polymers — a specialty polymers producer for our businesses that has been a tremendous asset for RPM within this mix. Corsicana provides us with that same kind of capacity, but multiplied by 5, so to speak. That covers part of the answer. Our core suppliers and our supply chain aren't changing — apologies, I mean our core customers — though we are now sourcing certain raw materials from offshore locations where we hadn't before. As a result, we're gaining more knowledge about global supply. We're also collaborating closely with many of our biggest suppliers on ways to navigate through this. So I believe — and this holds true throughout the supply chains — the degree of teamwork and the attempts to resolve these problems are quite impressive considering the current circumstances. That's really the best response I can give you right now; ideally, it will improve a quarter from now, but things remain quite fluid.

David Paige

analyst
#32

David Paige here, filling in for Arun Viswanathan at RBC. Apologies in case this came up before, but could you remind us where your biggest cash outlay is headed over the coming 6 to 12 months, and do you intend to give anything back to shareholders?

Rusty Gordon

executive
#33

Absolutely. We've been repurchasing stock ever since emerging from the worst of COVID; since the winter time, $62 million of shares have been bought back; regarding capital expenditures, plenty of projects are underway. Revenues and volumes are climbing across several of our businesses. That means a great deal of capacity expansion is happening. Acquisition activity has also ramped up. Several smaller deals have closed, and that pace has accelerated since the pandemic. Those, I'd say, are the main buckets for capital allocation.

Frank Sullivan

executive
#34

Regarding the 2 areas we've discussed that will have the greatest effect on cash this year, one is CapEx, which I believe will rise compared to last year by — what was it, Rusty, 50 million?

Rusty Gordon

executive
#35

Correct.

Frank Sullivan

executive
#36

Correct — that figure sits $50 million above what we recorded a year ago, and every dollar of it goes toward expanding capacity. Beyond that, there's the purchase of the facility in Corsicana, Texas. Even though that deal involved buying manufacturing assets, you can really view it as a further piece of our capital expansion. The remaining piece is working capital. Keep in mind, last year working capital gave us a very strong, favorable boost to cash flow, so this year's comparison is tougher, and we're also stocking up inventory in critical spots — that's one important way we're responding to the supply chain problem affecting the whole world.

Frank Sullivan

executive
#37

Thanks. Our Annual Meeting of Shareholders takes place tomorrow at 2:00 PM Eastern Time. For the sake of protecting shareholder and employee health and well-being, we're once again holding it virtually this year. You can get to it through the RPM website, www.rpminc.com, or at www.virtualshareholdermeeting.com/rpm2021. We feel good about the possibility of going back to an in-person meeting next year, which would let us pick up our tradition of connecting with close to 1,000 shareholders, handing out samples of RPM's newest products, and fielding their questions face to face. My thanks go out to our shareholders for continuing to invest in RPM. Creating long-term value for you stays our focus. I also want to thank our associates around the world for all their ongoing work and commitment, especially given these extenuating, challenging circumstances involving a global pandemic and, at present, global supply chain challenges. On the subject of dedication, let me pause to acknowledge 2 retirements here at RPM. Keith Smiley, who serves as RPM's Vice President of Finance and Controller, is retiring this month following close to 30 years of service. Back in 1992, when Keith came to RPM, he was our internal audit department. Later, in '93, he took on the role of Corporate Controller, and in 1997 he became Treasurer. In 1999, he was elected Vice President, Treasurer and Assistant Secretary, and in 2012, Vice President Controller. Kathie Rogers, RPM's Manager of Investor Relations, officially retires this Friday after close to 40 years of service to RPM. For most of that period, Kathie has been the voice and face for our nearly 200,000 individual shareholders. At the time Kathie came aboard at RPM, revenues stood at $154 million. By the time Keith arrived at RPM, 7 years afterward, revenues had climbed to $550 million. Kathie and Keith both played integral roles on the team behind a great deal of growth and a great deal of value creation for our shareholders, reflected in today's $6 billion in revenues and market cap of nearly $11 billion. On RPM's behalf, I wish Keith and Kathie the very best in their well-earned retirement. To everyone on the call, I wish good health to you and your families. We look forward to bringing you an update on our fiscal 2022 second quarter results in January. Thanks for being with us on today's call. And have a great day.

Operator

operator
#38

This concludes today's conference call. Thank you for participating. You may now disconnect.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete RPM International Inc. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.

Get the API View API docs →

This call discussed

For developers and AI pipelines

Programmatic access to RPM International Inc. earnings transcripts and 132,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in RPM International Inc. or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.