RPM International Inc. (RPM) Earnings Call Transcript & Summary

April 6, 2022

New York Stock Exchange US Materials Chemicals earnings 68 min

Earnings Call Speaker Segments

Frank Sullivan

executive
#1

Hello, and welcome to the RPM International Inc. investor call covering our fiscal 2022 third quarter. With me today are Rusty Gordon, RPM's Vice President and Chief Financial Officer, plus Mike Laroche, our Vice President, Controller and Chief Accounting Officer. I'll offer some broad comments about how we performed on a consolidated basis during the quarter. Mike will walk through the details of our financial results, and then Rusty will wrap up with our formal remarks and what we expect for the fourth quarter of fiscal '22, and after that we'll open things up for your questions. Just a note that we'll be speaking on an as-adjusted basis, and unless we say otherwise, all comparisons are against the third quarter of fiscal 2021; there's a supplemental slide presentation that supports what we'll say on this call. You can find it in the Presentations & Webcast section of the RPM website, at www.rpminc.com. In the third quarter of our fiscal 2022, RPM produced record consolidated EBIT and sales even though the comparison to the prior year was difficult; credit for these results goes to our associates around the world, who pushed through an extremely challenging operating environment — ongoing raw material and labor shortages, Omicron-related disruptions that hit especially hard during the third quarter, and meaningful wage and freight cost inflation. Growth in our consolidated adjusted EBIT came from 3 of our 4 segments: Construction Products, Performance Coatings and Specialty Products, all of which used selling price adjustments and operational improvements to lift the bottom line. Our Consumer Group is the exception. Mike will go into more detail on that when he presents our segment results. Since our primary raw material costs averaged an increase of more than 40% compared with a year ago, our Consumer Group will have to catch up through substantial selling price increases, which take effect at the end of this month. We moved quickly on supply chain challenges by rapidly expanding in-house resin production at a manufacturing facility we bought in September. Beyond that, thanks to the investments we keep making in the fastest growing parts of our business, our high-performance building, construction and coating systems have delivered accelerated growth. Construction and industrial maintenance activity is robust, energy markets have bounced back, and consumer takeaway is still strong. Thanks to 3 years of extraordinary effort by our associates to roll out our MAP to Growth operating improvement program, we've made structural improvements to RPM while preserving our entrepreneurial culture, which is the core strength of RPM. As a result, in the third quarter our Performance Coatings Group and Construction Products Group are not just posting record sales and EBIT but record margins as well. Our Specialty Products Group is moving toward that same level of performance, with record sales and EBIT results and better margin performance. And in our consumer business, we're making solid progress. To put it briefly, we're on the attack in nearly every area, putting money toward faster organic growth and considerably larger capital expansion—especially when it comes to Nudura ICF, roof restoration coatings, and several of our consumer product lines. Each of those is gaining positive momentum as we head into the fourth quarter and move into fiscal 2023. At this point, I'd like to hand the call over to Mike Laroche so he can walk us through our financial results in greater detail.

Mike Laroche

executive
#2

Appreciate that, Frank, and good morning to all of you. In Q3, our consolidated net sales came to $1.43 billion, which is 13% higher than the $1.27 billion we reported in the comparable quarter of fiscal 2021. Organic sales were up 13.4%, amounting to $170.1 million. Acquisitions added 1.4% to sales, or $17.8 million, whereas currency fluctuations worked against us, cutting sales by 1.8%, or $23.4 million. Adjusted diluted earnings per share came in at $0.38, matching the prior-year quarter. Our consolidated adjusted EBIT rose 0.8% to a record $80.6 million, versus the $79.9 million posted in the third quarter of fiscal 2021. If you compare fiscal Q3 '22 with Q3 of FY '20 before the pandemic, using a double-stack approach, growth reached double or triple digits in sales, EBIT, adjusted EBIT, net income, diluted EPS and adjusted diluted EPS. Just like we saw in the first two quarters of fiscal '22, the third quarter demonstrates what our balanced business portfolio brings us, since softness in one segment is usually countered by gains in the rest. Three of our four operating segments in Q3 of fiscal 2022 — Construction Products Group, Performance Coatings Group and Specialty Products Group — posted robust double-digit sales growth. Combined revenue for those three segments climbed 19%, and Consumer segment sales also increased, though only slightly. Excluding Consumer once more, adjusted EBIT for the remaining RPM businesses jumped 97%, an exceptional result. Inflation continued to hit our Consumer Group harder than other areas, and the group also faced labor shortages and supply chain problems linked to Omicron, particularly during December and January. That unstable supply situation produced inefficiencies and continued to pressure conversion costs, which caused adjusted EBIT for our Consumer Group to fall for a fourth consecutive quarter. Later in this call, we'll discuss what we're doing to address the difficulties this segment faces. In the third quarter, our Construction Products Group achieved all-time-high net sales of $482 million. That's up 21.7% compared with the third quarter of fiscal 2021. Organic growth accounted for 23.2%, while acquisitions contributed 2.2%. Currency translation acted as a headwind and reduced sales by 3.7%. The record top-line expansion at CPG came mainly because the segment keeps gaining traction with its differentiated restoration solutions. Given today's shortages of raw materials and labor, those solutions provide clear benefits compared with new construction. The same difficulties have driven even faster uptake of the segment's innovative building envelope offerings. Within CPG, the quickest-growing operations are those that provide roofing systems, insulated concrete forms, commercial sealants, and concrete admixtures and repair products. On the international side, the segment delivered solid top-line gains when measured in local currencies, although those results took a hit from the U.S. dollar's increased strength. For CPG in fiscal 2022's third quarter, adjusted EBIT rose 89.7%, hitting a record $35.1 million. Despite facing a difficult comparison against the prior year, CPG still drove adjusted EBIT and EBIT margin up sharply, setting third-quarter records, and it did so through an improved product mix, higher volumes, and operational gains. Those elements, along with increases in selling prices, offset the inflationary pressure on raw materials. Turning to our Performance Coatings Group, net sales for fiscal 2022's third quarter came in at a record $270.9 million, an increase of 19.6% versus the same period last year. On the organic side, we saw a 17.8% increase, and acquisitions contributed another 3.4%, though currency translation created a 1.6% drag that partially offset those improvements. Over at PCG, the momentum continued, and each of its North American units posted organic sales growth in the double digits. The PCG operations focused on emerging markets generated tremendous growth, while the European businesses there sustained their gradual recovery. Driving that robust revenue performance were increased spending on industrial maintenance, a rebound in energy markets, and higher prices. Polymer flooring systems, corrosion control coatings, and raised flooring systems were the top performers within PCG. On an adjusted basis, EBIT rose 89.9% to reach a record $26.8 million during the third quarter of fiscal 2022. Higher adjusted EBIT was driven by greater volumes, better operations, and a product mix that proved more favorable. Beyond that, our adjusted EBIT margin reached a record for any third quarter. At Specialty Products Group, net sales hit a record $189.4 million during the third quarter of fiscal 2022 — that's 11.9% above the fiscal 2021 third quarter. Organic sales climbed 11.9%, acquisitions added 0.8%, and unfavorable foreign currency translation subtracted 0.8%. Nearly every business within SPG performed strongly enough to deliver these record sales, with the largest gains stemming from operations that serve OEM and food additive markets. Also, in this segment, disaster restoration equipment sales came back strong once the company lined up its semiconductor chip supply and redesigned its products to work with those chips. That illustrates how our operations adapt rapidly when difficulties arise, which highlights a major benefit of RPM's entrepreneurial culture; this business did contend with a difficult comparison against the same period a year earlier, when demand for its restoration equipment was elevated as a result of Winter Storm Uri. Adjusted EBIT reached a record $26.6 million in fiscal 2022 third quarter, up 5.4% from adjusted EBIT of $25.3 million in the prior-year quarter. Operational improvements were chiefly responsible for this record adjusted EBIT. In the third quarter of fiscal 2022, our Consumer Group posted record net sales of $491.6 million. That's up 2.9% from the third quarter of fiscal 2021. Organic sales rose 3.6%, though unfavorable foreign currency translation of 0.7% partly offset that gain. As we expected, the segment's revenue growth came in part from its success in easing the serious alkyd resin shortages it had faced, thanks to the new Texas manufacturing facility we acquired in September. During the third quarter, unreliable shipping and supply weighed on sales and productivity; the cause was labor shortages tied to the Omicron variant, especially in December and January. Turning to the hurdles, the Consumer Group likewise had a tough year-over-year comparison, since the earlier period saw a 19.8% sales gain and a 48.6% rise in adjusted EBIT, driven by heightened pandemic first-phase demand for its home improvement offerings. For the third quarter of fiscal 2022, adjusted EBIT reached $17.2 million, down 63.9% versus the $47.8 million in adjusted EBIT posted during the comparable period last year. Given the nature of its products and the markets it serves, inflation has weighed on the Consumer Group more heavily than on RPM's remaining segments. And where EBIT is concerned, raw material inflation in particular has been the harshest hit. Price increases and operational improvements have partially counterbalanced those pressures, since the Consumer Group right now is putting money into capacity and process enhancements both to satisfy customer demand and to strengthen its supply chain against disruptions. To make up for the inflation this segment has faced across the last 4 quarters, the Consumer Group keeps rolling out price increases. Finally, I want to point out that our liquidity is substantial, and that lets us finance internal growth projects, pursue acquisitions, return cash to our investors through dividend payments, and buy back our shares. A $300 million bond offering that we finished in January has helped keep our liquidity in good shape. Additionally, we bought back $15 million worth of our common stock during the third quarter. With that, I'll hand things over to Rusty, who will go over our outlook.

Russell Gordon

executive
#3

Thank you, Mike. Looking ahead to the fourth quarter of fiscal 2022, we anticipate that both our own facilities and those of our vendors will feel the effects of persistent difficulties in the supply chain and insufficient availability of raw materials, placing strain on our top line and our efficiency. The appreciation of the U.S. dollar will likewise hurt us when translating results from overseas markets. On top of that, the conflict in Ukraine is generating certain supply-related and inflationary headwinds, and Frank will speak to that shortly. It remains too early to know for certain, but higher interest rates could dampen commercial activity and consumer outlays over the next several months. Even with these obstacles, we look for consolidated sales in the fourth quarter of fiscal 2022 to rise at a low-teens rate against a tough prior-year comparison, since last year's fourth-quarter sales were up 19.6%. Across our segments, we expect low-teens sales gains in each of our 4 operating groups, driven by the strategic investments we are making to seize market opportunities and ride industry trends. We expect consolidated adjusted EBIT in the fourth quarter of fiscal 2022 to be up at a low-teens rate compared with the equivalent period a year ago, when adjusted EBIT rose 10.6%. We believe earnings will keep feeling the effects of inflation in raw materials, freight and wages, along with the hit to sales volumes from operational interruptions stemming from raw material shortages. These problems will hit our Consumer Group harder than elsewhere. Its EBIT margins have declined in each of the 3 quarters so far this fiscal year because of inflationary pressure, which affects the Consumer Group more than RPM's other segments. We keep striving to offset these forces through better operational efficiency, further price increases aimed at closing the gap with inflation, and added production capacity to strengthen our resilience. That wraps up our prepared remarks. We are now happy to take your questions.

Frank Mitsch

analyst
#4

You said raw materials in a few of your key inputs rose more than 40% during Q3. That marked a big jump compared with Q2. Could you share your view on the direction that's heading? When it comes to securing raw materials, what worries you the most?

Frank Sullivan

executive
#5

Absolutely. Let me offer a few illustrations, Frank. To begin with, we had begun to observe a leveling off in prices for certain resins and other categories tied to oil, until Russia's invasion of Ukraine began. That leveling off has reversed, and because of geopolitical factors, these items now appear as though they could be climbing again; so nobody can predict where things will stand in Q4. Let me get specific to give you a sense of the situation. Take consumer, for example: aerosol cans are up 66% versus a year ago. Alkyd resins have risen 113%. Acrylic latex is 41% higher. Monomers have climbed 86%. Turning to what matters more for our industrial product lines, epoxy resins are 72% higher year-over-year. MDI has increased 106%; so there's a long list of unfortunate, steeper price hikes across essential raw materials; availability had gotten considerably better. The majority — not every one, but the majority of force majeures declared during the past 12 to 15 months have been lifted. Yet again, though, we expect difficulties with certain resins, especially some bio-based resins we procure from Europe and India, stemming from the turmoil caused by the war in Ukraine.

Frank Mitsch

analyst
#6

Understood, understood. So you brought up a few times during this call that you're putting price hikes into place. You keep rolling out these increases. Given everything we know right now, how should we think about the timing — when will RPM get to the point where pricing offsets what raws are doing? And I suppose another piece of that is, with sales in the fiscal fourth quarter expected up low teens, how do you break that down between price, volume, and FX?

Frank Sullivan

executive
#7

Sure; for the quarter overall, pricing rose 12.5%. If you examine organic growth, the Construction Products Group and Performance Coatings Group both delivered outstanding results. In the Specialty Products Group, things appeared roughly level, though that was a blend — certain units achieved organic growth while others did not. When you calculate it out, Consumer actually saw unit volumes fall during the quarter. That was driven at least as much by disruptions in manufacturing and operations plus difficulties obtaining raw materials as by anything else, because demand in that area is still holding up quite well. Regarding Q4, per Rusty's comments, momentum heading into the quarter is quite strong; across Construction Products Group, Performance Coatings Group, and—as we see it now—Specialty Products Group, we'd anticipate continuing to deliver sales, EBIT and EBIT margin figures at all-time highs. Thus, looking at the whole company together, achieving record results seems within reach. The determining factor is how Consumer performs by the time the quarter closes. Based on where we stand right now in Q4, pricing should contribute roughly 12.5% to revenues. Yet, like Rusty mentioned, we're rolling out an additional wave of price hikes across several product lines within RPM, wherever it makes sense—especially in our Consumer Group, effective at the close of this month. That's because those offerings are hit hardest by raw material and packaging expenses, being small project-driven items in paints, patch repair, and epoxy sealants. We also face an outsized packaging cost burden in that area. So when we share results in July, my expectation is that our fourth-quarter figure will come in a bit above 12.5%, given where pricing stands across RPM right now.

John McNulty

analyst
#8

Nice work given how difficult conditions have been. I suppose there were around 2 topics I hoped to explore. The initial 1 concerns the alkyd matter. I realize this has weighed on you folks heavily across roughly the past 3 quarters. It appears you've resolved a portion of that now that the Texas site is operational. So how should we view the way that relieves some strain on the Consumer segment? There appear to be numerous other variables at play; yet I'm curious how significantly this changes things so that performance clearly improves?

Frank Sullivan

executive
#9

Of course. Starting in the fall, our own production capability grew when we brought the Corsicana, Texas facility on board, along with that team's capacity to effectively scale up output of alkyd resins, something they'd never previously manufactured. That formed one motivation behind the purchase. Around that same period, a different vendor pulled its supply out of the market. Consequently, conditions stay difficult, to put it mildly. Also, for our Consumer Group, alkyd represents an especially essential input.

John McNulty

analyst
#10

Understood. Your asset is up and running, yet it seems another party actually removed additional capacity, so perhaps that provided some benefit, though less than it might have otherwise. Is that accurate?

Frank Sullivan

executive
#11

Yes, that's right.

John McNulty

analyst
#12

Understood, alright. Now regarding the Construction segment, activity levels really appear to be — they seem to be running hot right now. I suppose, could you discuss how you expect that to unfold over the remainder of the year? And since you take a contractor-style approach where you employ your own workers, I'd guess, I imagine that provides clearer insight into that segment. So then, I suppose, how distant in terms of forward visibility do you have concerning the business trends you're observing there?

Frank Sullivan

executive
#13

Well, I'd say visibility anywhere isn't particularly strong given all the forces at play in the market. As we move into Q1, I'd anticipate record performance from us in sales, earnings and margins across the board. That covers Consumer, thanks to the steps we're implementing and also finally cycling some simpler comparisons following the remarkable stay-at-home-fueled surge in DIY products that we're now lapping. I believe the organic growth we're witnessing in our Construction Products Group over the coming few quarters, to the extent we can determine, will stay within the mid- to high single digits on an organic growth basis. You can tack on roughly 12% for sale price impact. So once more, without venturing too far ahead of ourselves simply because forecasting the future is tough in this climate, the momentum as we head into the next couple of quarters is extremely robust, and nothing appears likely to derail that right now.

John McNulty

analyst
#14

Understood.

Frank Sullivan

executive
#15

Yes. There's another point I'd like to make on that, John. When it comes to either our Nudura ICF or our roof restoration coatings, the situation right now is that demand exists for more than we can supply, since capacity constraints affect several of these product lines. On top of that, a major capacity expansion initiative is underway for Nudura, with its initial phases taking effect from the close of the fourth quarter and continuing across the summer. We also have a sizable capital expansion planned in roof restoration coatings, and that ought to be introduced over the remaining portion of this calendar year.

John McNulty

analyst
#16

Understood. And actually, as a quick follow-up on that point, could you give us a sense of how much capacity this could free up?

Frank Sullivan

executive
#17

Sure. When it comes to roof restoration coatings, likely an additional $50 million to $100 million. Then with Nudura, we're aiming to bring on another $40 million to $50 million of capacity before this calendar year wraps up, and potentially as much as an extra $100 million by the time summer of '23 comes to an end.

John McNulty

analyst
#18

Wow, alright. That's quite significant. Okay, many thanks for the detail. Truly useful.

Ghansham Panjabi

analyst
#19

Since Europe represents a fairly major end market for RPM, could you share your thoughts on the operating environment right now following the war? And is there anything you're noticing in China at this stage, particularly with the lockdowns and so on?

Frank Sullivan

executive
#20

Certainly. Regarding our business — let me start with Asia. Our operations in Asia are comparatively small versus what some of our competitors have; we aren't experiencing much of an effect largely because we don't hold a large chunk of business in that region, and what we do hold there comes from our industrial product lines. So right now, things are fairly steady. We aren't observing much of a negative effect. When it comes to Europe, that region was bouncing back at a slower pace than North America, no question; and that rebound appears to be holding up fine at present, though we definitely — we haven't yet encountered any substantial interruption to our business activities, even as we are definitely on alert for that. Regarding the situation in Ukraine, we acted very quickly and early to halt each and every business activity in Russia; we have no manufacturing operations in that country. What we do have there is fairly small, roughly $5 million or $6 million on an annualized basis. And we both believed it was the correct course of action and definitely wished to address the worries of a considerable portion of our workforce in European manufacturing and distribution who are of Ukrainian descent. So that covers the effect on Russia and Russia's war on Ukraine. Broadly speaking, though, we are on alert, sort of expecting consequences, but we haven't witnessed them so far.

Ghansham Panjabi

analyst
#21

Alright, that's quite useful. And when we look at the energy end markets specifically, clearly there's been a significant jump upward along with energy prices and so on. Can you remind us of the size of energy as an end market for RPM and what you're observing there in terms of recovery, yes, after COVID.

Frank Sullivan

executive
#22

Certainly. Most of our energy exposure sits within our Performance Coatings Group, and largely within Carboline. So the Performance Coatings Group is roughly $1.1 billion, and Carboline and Stonhard are, by a wide margin, the 2 biggest business units in it. My estimate would be, both directly and indirectly, and here I'm speaking broadly — oil and gas, refinery, pipelines, that sort of thing — around $300 million or so of exposure to oil and gas markets at large. Again, as you can see, we achieved high teens organic growth, high single-digit unit volume. And growth is somewhat stronger in that business compared with the average in those businesses or product lines tied to energy markets, and we expect that to persist. So there's a bit of a double-edged sword here: it's fueling a substantial rise in capital spending and business for us across our industrial segments; it's also fueling a substantial rise in our raw material costs too.

Steve Byrne

analyst
#23

In your Consumer segment, there's an intermediary sitting between you and the final customer. I was just wondering, what does the process look like for securing pricing there? Does it take extra time? Is it something you have to negotiate? Is it a tougher hurdle for you than what you face in your other segments?

Frank Sullivan

executive
#24

Yeah. Usually there is a lag, and yeah, it does involve negotiation, especially with our large customers; across the past 12 months, we've put through 3 price increases; and when it comes to rolling those out among large customers, the timing shifts somewhat, though not dramatically. And in our Consumer business, we're getting hit disproportionately by raw material costs on both fronts — direct chemical raw material costs and packaging costs — and as our numbers show, we're somewhat behind the curve when it comes to addressing cost/price mix, which is forcing a fourth price increase that we'll announce at the end of this month.

Steve Byrne

analyst
#25

Frank, you brought up labor shortages within this segment. Are those shortages among RPM's own employees? Or are they at your customers, or somewhere in the distribution channel? And are things getting better now?

Frank Sullivan

executive
#26

It really came down to 2 areas. The largest one involves our biggest plants, which are the Consumer ones, and at a number of Rust-Oleum facilities — including our biggest DC, located in Wisconsin, plus our biggest manufacturing site, also in Wisconsin — Omicron hit us meaningfully, whether through employees who were out sick with the infection or those quarantined after being exposed. As a result, the impact fell disproportionately on our Consumer business, Rust-Oleum in particular. We saw the same thing in that Consumer business with raws typically delivered just in time by freight into our plants and then on the distribution side, where certain customers come to pick up and in other instances we arrange the freight. Over that stretch, we think Omicron caused an outsized effect on trucker and freight availability, so that hurt the segment too.

Steve Byrne

analyst
#27

During the final month of the upcoming quarter, do you foresee conditions getting better for your company?

Frank Sullivan

executive
#28

Indeed, we do. Within that segment, improvements are appearing, which means material moving through our facilities is much smoother; this should boost earnings and margins as we head into Q4. Turning to the Omicron surge, we monitor — since March 2020, we have tracked quarantines and infections related to COVID on a weekly basis across all of RPM. That Omicron wave arrived with astonishing speed, peaked sharply, then faded away fairly fast; as a result, we have returned to a far more typical rhythm, without the same level of interruption during late February and March. We also hold hope that COVID's most difficult phase has passed. It appears that even if COVID has not finished with America, America has finished with COVID.

Steven Haynes

analyst
#29

Steven Haynes here, filling in for Vincent. I'd like to raise one question regarding cash flow. Across the first 9 months, operating cash came in at roughly $500 million versus the prior year, and working capital accounts for most of that. So, if you could, please share some perspective on what you expect for operating cash generation across the entire year, and whether a substantial working capital release might occur in the fourth quarter?

Mike Laroche

executive
#30

Certainly. That's exactly correct. Working capital hurt our operating cash flows, and the main causes were the supply chain problems we've been talking about, plus inflation, frankly speaking. Our expectation is that inflation will persist, and wherever possible we'll keep buying on an opportunistic basis so we can secure both availability and price. As a result, over the coming few quarters, you might notice some atypical relationships between working capital and cash flows.

Steven Haynes

analyst
#31

All right. Then perhaps a brief follow-up regarding that conversion cost. Could you help us size, say, the total effect accumulated across the entire year up to now, just so we might form some sense of what the potential benefit looks like once that eventually starts to swing back?

Frank Sullivan

executive
#32

Certainly. When you examine our EBIT margin broadly on a quarter-to-quarter basis and, specifically, take this quarter, where Consumer is enduring the most pain, the bulk of that drop in EBIT margin comes from a decline in gross margin, even though we don't break out gross margins at the segment level; and within that, I'd say roughly 2/3, perhaps slightly above that, relate to materials, while approximately 1/3 stems from operating efficiency and throughput at the plants. So across every one of our businesses, we absolutely anticipate that once things return to normal, the workforce disruptions get eased or removed and left behind, and we achieve typical flow-through at our facilities comparable to where we stood merely a couple of years ago, that 1/3 effect on our margins would be regained. What remains is really a cost/price mix dynamic, and we're handling that more effectively in our industrial businesses than we have in our consumer businesses so far this year.

Kevin McCarthy

analyst
#33

On Performance Coatings, your prepared comments mentioned explosive growth in emerging markets. That word "explosive" caught my ear, so I wanted to ask whether you could walk through where the strongest growth is showing up, and what's actually behind it. Does it tie to acquisition activity you've completed, or is it more organic? I'd love any color you can give.

Frank Sullivan

executive
#34

Absolutely. It's more organic, and we've adopted a wider RPM platform strategy in certain developing markets. As a result, there's strong collaboration between our Performance Coatings Group and our Construction Products Group — the 2 RPM groups with the most international exposure and the most developing world exposure — plus a genuine emphasis on fueling organic growth and investing. So we're witnessing considerable growth in India, considerable growth in Africa, in the Middle East, in Latin America. And I'd say part of it reflects recovery from COVID, for example, in Latin America. Part of it comes from a sharper focus on an RPM platform basis and placing those regions under leaders accountable for a wider swath — proven leaders accountable for a wider swath of RPM businesses and products, and that approach is delivering. One final point: it's explosive off a fairly small base, but if we continue growing that base, it will keep expanding and turn into a more meaningful piece of our business.

Kevin McCarthy

analyst
#35

Great. My second question was much wider in scope. Looking at Slide 11 in your deck, the fourth-quarter sales projection is remarkably even across every one of your segments. Each is anticipated to expand at a pace in the low teens. So I wanted to ask if you could discuss 2023. Maybe it's too soon to get granular about guidance at this point. But as we sit here right now, in what way do you think those trends will split going forward? Is there a segment in your thinking that should expand significantly quicker than the rest, or lag at the opposite end?

Frank Sullivan

executive
#36

So, Kevin, I'd offer 2 remarks on that. First, the farthest horizon we can genuinely see spans a quarter or 2. Thus, as I said before, as we sit here right now, I'd anticipate all of our segments, Consumer included, delivering strong sales and earnings gains in Q1. And the momentum we're witnessing in our Performance Coatings Group and Construction Products Group is going to persist. The Specialty Products Group ought to return to record margins, and not merely improved sales and earnings. Plus we'll witness a strong rebound in Consumer, on both the top line and bottom line, partly since the steps we're taking are gaining traction, partly since COVID disruptions are moving into the past, and partly since we'll be lapping some simpler comps in Consumer; therefore you should expect record Q1 results for RPM on a consolidated basis in every one of our segments. This outlook, I believe, is truly a continuation of what we're going through in our 3 more industrial segments, along with an expectation that we will at last see favorable results from Consumer. Over a longer horizon, once more, absent any shift in the dynamics, we'd anticipate a strong fiscal '23, and we'll give fairly good specifics on that in July. And we're also hopeful we can offer some longer-term perspective regarding where we're headed with a MAP to Growth 2.0, something many of you are aware we've been laboring on for some time; however our readiness to step forward and make commitments over a longer horizon has been upended by COVID and supply chain difficulties that were settling into something closer to normal and stable until the Russian war on Ukraine. So that, I think, is the caveat in this case. We aren't yet observing much effect on our European business; but the coming months will reveal what effect there may be and how large.

Kevin McCarthy

analyst
#37

Great. We're eager to hear the next round of news.

Arun Viswanathan

analyst
#38

Trust all is going well. Yeah, I simply hoped to get clarity on that low teens outlook. I believe you cited 12.5% on price. Does that mean roughly low single-digit growth in unit volume, or perhaps somewhat stronger, with some FX drag offsetting it? What's the right way to frame your volume against price?

Frank Sullivan

executive
#39

Of course. In particular within Performance Coatings and Construction Products, our expectation is unit volume expansion in the mid- to upper range, plus a continuation of the roughly 12%, 12.5%, average price gain. So organically, you'd potentially see mid- to high teens results. The rising U.S. dollar is going to shave that somewhat, costing us a couple of points. Across the overall mix, it's quite plausible we keep delivering mid-teen performance in a number of the industrial businesses, while Consumer should land in that low teens area, around 10%, 12%-ish. That's the current picture; it'll be a blend of the two. Still, we're fairly confident in this guidance; and like I said, in Q4, we should hit record EBIT on a consolidated basis, and ideally record EBIT margins too. It all hinges on how fast the steps we're implementing in Consumer drive a better rebound there.

Arun Viswanathan

analyst
#40

All right. I'd like to build on something you mentioned before regarding how certain cost pressures you'd been experiencing across the past 2 years seemed to be leveling off or plateauing; then, I believe, there was a modest surge tied to the Russia-Ukraine invasion; has that eased at this point? It looks like certain energy and pricing effects have begun to soften too. Would you agree that's what's happening? And do you view this as more of a longer-term situation, or would you call it merely transitory?

Frank Sullivan

executive
#41

That's difficult to assess at this moment. Once again, we had been observing certain favorable underlying movements in items such as ethylene, propylene and even a few of the raw materials we buy directly. Then everything turned around when Russia went to war with Ukraine. Honestly, who can tell? I'm not attempting to be evasive here. Should this matter get settled, and I believe the world hopes for that fairly soon, then my view is we might witness some steadiness. Should it broaden and exert a bigger effect on oil and gas pricing along with certain organic resins that we purchase, chiefly from India, but those have jumped for reasons I don't — well, some folks do, I personally don't grasp directly, aside from the fact that they jumped due to the fallout from the Russian war. It's tough to predict how far this will spread and what effect it will have on raws. So we're monitoring both how it affects our European business, which up to now, fortunately, hasn't been significant, and how it affects raw material costs, which at minimum in the short run have overturned what had otherwise been a favorable trajectory.

Arun Viswanathan

analyst
#42

Thanks. Finally, could I ask about your approach to M&A? I realize there was more emphasis on MAP to Growth during the past 2 years. Yet are you also moving back into the inorganic side? What's your read on conditions there? And should there be particular areas of attention, which ones are they, and what are you observing when it comes to valuations?

Frank Sullivan

executive
#43

Certainly. The pipeline for standard RPM deals — smaller and mid-sized product lines — looks quite solid; generally speaking, we'd anticipate finishing roughly $100 million or $200 million of product line or business acquisitions on an annualized basis. That's what we've always done best. Big transactions have carried remarkable price tags. My sense is that some easing and valuations will emerge as interest rates climb, and inflation comes to be viewed as something beyond temporary, and we'd be glad to see that; that's roughly where things stand. At these record-high valuations, which appear to be lingering even with substantial raw material costs, we wouldn't plan to be an aggressive participant. I can share that Rusty, Matt Ratajczak, Mike Laroche, Rusty's team completed a 10-year bond at the end of January and captured a 2.95% coupon; and were we to do that bond again right now, it would run us 4.25% or more; so whether the market has yet fully absorbed how higher interest rates affect the incremental cost of capital, I can't say, but in time, it will.

Josh Spector

analyst
#44

I just want to clarify something first, regarding the inflation on raw materials — let me confirm I understood correctly. That 40% figure you mentioned, did it apply to the whole company or just consumer? And then, if we look at that within overall variable cost inflation in COGS, what would that figure be?

Frank Sullivan

executive
#45

I can't really respond to that final portion of your question, but the 40% does cover the entire company. That includes materials as well as packaging. Freight and labor aren't part of it, and those are also elevated, though definitely not to the same degree. Consumer is a bit greater, especially given its exposure to items such as acrylic resins, which, again, compared with a year ago, have risen 113% — or alkyd resin, also 113%. Aerosol cans have climbed 66%, so that's quite specific to Rust-Oleum. As a result, they have some larger outliers tied to their — the small packaging character of our consumer businesses and the outsized effect of acrylic resins on Consumer relative to our other businesses.

Josh Spector

analyst
#46

All right, that's useful; and I have one particular question about Europe, more precisely the Performance segment. A maker of epoxy previously closed certain capacity in that area; and lower demand played a role in that choice; that appears somewhat contradictory given what you're observing regarding that segment. So I'm wondering whether you have any opinions or remarks about it.

Frank Sullivan

executive
#47

Certainly; so to begin with, the cost of epoxy resin for us has risen 70% versus a year ago, so that hasn't been favorable; we've managed to push through pricing. Earlier someone mentioned our capacity to deliver supply and apply, which helps us across many of our roofing operations as well as the Stonhard flooring operation, and so that has worked to our benefit. Epoxy resins and a few of the intermediate chemicals used in epoxies faced some availability issues at the start of the year. At this point, we're doing quite well.

Silke Kueck

analyst
#48

During the previous quarter, you mentioned a $200 million headwind stemming from sales that were lost because of raw material shortages, and perhaps $100 million of that fell within the Consumer segment. Could you say what the figure was this quarter, and how much of it landed on Consumer? Also, what do you anticipate possibly facing in Q4, and what is your thinking regarding '23?

Frank Sullivan

executive
#49

Absolutely. My sense is that in Q3 we didn't really have anything you could clearly identify as lost revenue, and that relates largely to how seasonal our business is — as you're aware, our third quarter runs considerably below the other 3 quarters. As a result, we haven't identified much of an effect we can specifically call out. It's conceivable that Q4 could bring an effect matching what we experienced in Q1 and Q2, simply because Q4 is a notably big quarter for us as we move into a construction season and into a consumer DIY season, especially for products used on exteriors. To put it briefly, though, Q3 did not see a noticeable or measurable effect the way earlier quarters did.

Silke Kueck

analyst
#50

And regarding Q4, if I heard that correctly, your guess is roughly on the order of about $200 million, is that about right?

Frank Sullivan

executive
#51

My guess would be that it's 50% of that amount, and mostly within Consumer, unless raw material interruptions occur because of Russia's war on Ukraine, which we aren't expecting as we sit here today. But within our industrial businesses, we aren't facing the raw material interruptions that we dealt with during the first half of the year. What I mean is, during that first half, we experienced sizable enough raw material interruptions—whether to direct raw materials or to ingredients used in the chemical raw materials we bought—that production had to be halted at many locations. As we sit here today, that isn't happening. And when it comes to the consumer side, the interruptions we faced, from both the standpoint of raw material availability and simply ordinary throughput, are getting better again as we sit here today. So should Q4 bring an impact, my bet is it lands nearer to $100 million throughout the entire business, though we'll provide those specifics in July.

Silke Kueck

analyst
#52

My next question concerns resins. Within the baskets that make up your cost of goods sold, what share is represented by epoxy resins, alkyd resins, and acrylic resins? If you total them up, does that come to roughly 1/3 of what you spend on materials, or is it a larger figure? Also, at present, how much of that can be produced internally? Or perhaps, considering the manufacturing capabilities you've bought, how much could be produced internally next year?

Russell Gordon

executive
#53

Sure, yes. When it comes to resins, no single one accounts for even 5% of the raw material basket across all of RPM. You named a few of the larger ones that we purchase — acrylic resins, alkyd resins, epoxy resins. Each matters to different product lines. On internal production, as we've discussed, we're adding supply in alkyd resins. That facility in Texas is a good one for soaking up supply disruptions such as those we've experienced during the last 12 months. Even so, we keep working with multiple alkyd resin suppliers and anticipate doing so going forward.

Frank Sullivan

executive
#54

What we'd anticipate is that producing alkyd resins internally would land at around 20% or 25%. Like I mentioned, we had been progressing well, and then within the past 2 months, an additional long-term supplier pulled its capacity out of the market, which caught us off guard and is something we're now adapting to.

Silke Kueck

analyst
#55

All right, that's useful. Regarding your cost-cutting initiative, did you realize any quantifiable benefits during the quarter from the latest portion of the MAP program? Or had it all been exhausted — since a chunk of it clearly relates to buying raw materials. So was there any quantifiable benefit from MAP that you could put a figure on, something incremental versus the prior year?

Frank Sullivan

executive
#56

Based on our best estimate, approximately $15 million for the quarter.

Silke Kueck

analyst
#57

$15 million?

Frank Sullivan

executive
#58

Yes. And what I'd say is this: the fact that both the Construction Products Group and the Performance Coatings Group have been able to bounce back to all-time highs for EBIT and EBIT margin in conditions like these comes down just as much to gains in efficiency from our MAP operating improvement program as it does to cost/price mix. So it's been enormously — we got lucky with the timing. It's worked enormously in our favor amid the disruptions we've dealt with during the past year.

Silke Kueck

analyst
#59

All right. My final question concerns the Consumer business. PPG broadened its ties with Home Depot across primers and sealers, crafting paint, and stains. Looking at your share at Home Depot, or broadly across your big-box retail operations, would you say it's flat, rising, or falling? Are you able to tell?

Frank Sullivan

executive
#60

I don't believe we've given up any share, and there isn't a single area we could identify. The largest difficulty facing us, and facing most participants in consumer markets plus portions of the core architectural paint segment, is supply. We took pride in fill rates of 98%, 99%. That's how we ran for many years; and because of the COVID disruption together with supply chain challenges, fill rates are considerably lower now. That has created difficulties for us, for competitors across our industry and, frankly, when you walk into a major retailer, for consumers in many regions; so what's at issue is supply tied to raw material availability and costs along with COVID-related disruptions far more than any share problem today. We're also adding capacity within our consumer businesses so that, once these disruptions are behind us, we can return to those elevated fill rates while holding share and expanding.

Richard Garchitorena

analyst
#61

This is Richard here, filling in for Mike. So, to start off, you brought up that the invasion by Russia significantly affected the supply chain, clearly. Is that remark tied only to the elevated derivative pricing for oil and related products? Or are there particular items that might be unavailable when it comes to supply chain, like CIO2 or others?

Frank Sullivan

executive
#62

Yes; we haven't encountered direct problems with availability, but we noticed a rather swift turnaround in what had appeared to be prices leveling out for certain basic commodity chemicals, some movements that were heading the right way, which implied our raw materials might be leveling out or possibly, as time goes on, declining — and that flipped very fast. So it's, clearly, oil — straight up, oil and solvents and similar items, but it affected every one of our resins. And then, like I said before, certain bio-based resins, soy-based resins, soybeans, that kind of thing, there are some supply difficulties there, and whether those turn into major issues or get resolved in the weeks and months ahead, only time will tell.

Richard Garchitorena

analyst
#63

All right. Then as a quick follow-up regarding the EBIT outlook, low teens in every segment — I mean, essentially, could you share a bit of detail about where you anticipate the greatest expansion on the EBIT line? And clearly, when it comes to Consumer, do you anticipate sequential gains as part of that? <<inaudible>>

Frank Sullivan

executive
#64

It seems we've got a disconnection, and I think we're once again live on this conference call. So, operator, should any further questions exist, we'd be glad to address them.

Mike Harrison

analyst
#65

So perhaps, to wrap up what was raised in that prior question—I wasn't able to catch the answer—but are there specific segments where that guidance for EBIT in the low teens next quarter would be surpassed? Then my follow-up, I suppose, concerns the Consumer business: should we expect EBIT there to increase compared with the same period a year earlier?

Frank Sullivan

executive
#66

What I'd say is that within our Construction Products Group and our Performance Coatings Group, there's a chance to beat that low teens figure through a combination of pricing and volume. The strength of the dollar means FX will offset some of that. Even so, we're seeing solid momentum carry on in both. On top of truly robust results from a year ago in Q4, they're delivering record results. Our Consumer business is headed the right way, and we're observing that. Actions are being taken by us to get it there, so improvement will come quarter by quarter in sequence. Modest positive unit volume growth is what I'd anticipate there, and negative unit volume growth has been something we endured over the past couple of quarters, so solid progress is what you'll see. Sequentially, our margins will also improve. Getting back to positive EBIT and stronger margins on a year-over-year basis in Consumer won't happen, in my view, until the first quarter of our new fiscal year, which begins on June 1.

Mike Harrison

analyst
#67

Great. Turning to the Consumer segment now — I believe on last quarter's call you put fill rates somewhere between 50% and 70%. You noted they were still running a bit low. What we're after is some sense of how much of the seasonal demand you'll be able to serve, and roughly where inventory stands as we move toward the spring season.

Frank Sullivan

executive
#68

Without going into detail, since it varies by product line and by customer, our fill rates are getting meaningfully better each week. A big part of the story there — the fill rate difficulties during Q3 tied back, as we discussed previously, to the Omicron effect, especially at our Rust-Oleum manufacturing site and DC. Those are separate yet quite large locations in Wisconsin, plus raw material and packaging availability. Freight problems across the past 2 quarters also weighed on fill rates. Everything there is getting better, and we won't reach the levels we'd like during Q4, though we will be meaningfully improved relative to the prior couple of quarters. I'd expect that to contribute to the sequential improvement we anticipate seeing in our Consumer Group.

Mike Harrison

analyst
#69

Okay. Then the final thing I have for you is that you said in the press release inflation and higher interest rates might be affecting consumer demand. Has any proof of that shown up so far, or is it simply what Econ 101 would suggest?

Frank Sullivan

executive
#70

No. What I actually meant was an effect on M&A valuations; that part is tough. We look at consumer demand on a sequential basis and compared with a year earlier, yet we also examine some periods before COVID. So getting a solid read on what the right level of consumer demand should be is a bit difficult when set against the 30% or 35% unit volume gains we literally saw across roughly 3 straight quarters amid COVID, driven by stay-at-home orders. Consumer takeaway, then, is strong, and we believe that holds and will keep holding as we move into the summer. Both we and our big customers, I think, feel that because of COVID we grew the pool of confident DIYers, which means a bigger group of steady consumers that has us excited. Supply has been our issue. It has involved raw material supply and associated product supply, which shows up in fill rates that are — that have fallen short of where they ought to be.

Frank Sullivan

executive
#71

Thanks so much for joining us on this morning's conference call. We're eager to keep building momentum and positive growth as we move through the fourth quarter of fiscal '22, and to get off to a really strong start in our new fiscal year. In July, when our fourth quarter results come out, we look forward to sharing the details with you, along with an outlook for fiscal '23 and some longer-term goals we've been working on for quite a while. I want to express my gratitude to the RPM associates, who delivered a return to record sales and record earnings in spite of every challenge we encountered. And we're thankful for everyone's investment in RPM. Thank you, and have a great day.

Operator

operator
#72

Everyone, that wraps up the call for today. We appreciate your taking part. You're free to hang up at this point.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete RPM International Inc. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.

Get the API View API docs →

This call discussed

For developers and AI pipelines

Programmatic access to RPM International Inc. earnings transcripts and 132,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in RPM International Inc. or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.