RPM International Inc. (RPM) Earnings Call Transcript & Summary
April 6, 2023
Earnings Call Speaker Segments
Matt Schlarb
executiveThanks, Sarah, and welcome everyone to RPM International's call covering the third quarter of fiscal 2023. This session is being recorded. With us on the line today are Frank Sullivan, our Chairman and CEO; Rusty Gordon, Vice President and Chief Financial Officer; and Michael LaRoche, Vice President, Controller and Chief Accounting Officer. You can also hear this call via webcast, either live or on replay, over at the RPM site, www.rpminc.com. Some remarks today might contain forward-looking statements grounded in present expectations, and those carry risks and uncertainties that may lead to actual outcomes differing materially. For additional detail on such risks and uncertainties, please look at RPM's filings with the SEC. On this call, we might reference non-GAAP financial measures. To help you grasp these non-GAAP terms, RPM has placed reconciliations to the most directly comparable GAAP financial measures on the RPM website. Also, be aware that our remarks will be on an as-adjusted basis, and unless otherwise noted, all comparisons are against the third quarter of fiscal 2022; a supplemental slide presentation supporting our comments today has been provided. You can find it within the Presentations and Webcasts section of the RPM website, www.rpminc.com. Right now, I'll hand things over to Frank.
Frank Sullivan
executiveThank you, Matt, and good morning, plus thanks for being with us on today's call. To kick off today's call, I'll go over how we performed at a high level during the third quarter; after that, Mike will walk through the specifics of our financial results, and Matt will share some business updates. Then, to wrap up our prepared remarks, Rusty will present our outlook, and following that, we'll be happy to take your questions. During Q3, RPM associates stayed concentrated on carrying out our MAP 2025 and other efforts aimed at pushing both sales and adjusted EBIT to record heights for a fifth quarter in a row. That concentration on execution allowed us to get past a number of headwinds, among them customer destocking and slowdowns in particular end markets. Since these slowdowns are anticipated to persist, we started implementing further measures in the third quarter to respond to shifting market conditions by focusing our investments more narrowly on our top growth opportunities and cutting costs where it made sense. Such measures come on top of the structural improvements already underway through our MAP 2025 initiative. One strong illustration of how we're pursuing continuous structural improvements is our Green Belt program. Over the quarter, an additional 58 associates went through training to become Green Belts, centered on continuous improvement initiatives. To obtain this certification, each must find and carry out no fewer than two projects delivering savings of $100,000 apiece. RPM currently has 200 associates who have completed Green Belt training and are acting as internal resources to generate structural savings, both at present and going forward. Before we move into the segment discussion, I want to point out that across the last five quarters, we have effectively steered through multiple challenges, among them severe supply chain disruptions, war in Europe, elevated inflation and a recent demand slowdown. Our capacity to deliver record-setting performance amid this dynamic environment shows the worth of our strategically balanced business model and the agility of our associates in leveraging our broad product portfolio and entrepreneurial culture as market conditions change. Moving to the segments on Slide 4, each of the four posted record third quarter revenue. The main factor behind this growth was increased pricing in response to continued inflation. The strongest revenue growth came from our businesses providing engineered solutions targeting infrastructure and reshoring projects. Among these are our concrete additives and admixtures businesses, our flooring systems businesses and our protective coatings and fireproofing businesses. These businesses have established themselves in the highest growth sectors of the construction market, such as manufacturing facilities for electrical vehicles and microchips. Businesses serving OEM markets and residential and commercial construction sectors faced weak market conditions. Demand in these areas has been negatively impacted by higher interest rates, deteriorating economic conditions and customer destocking and their impact on the U.S. housing market and commercial construction activity. Also, within our Consumer segment, unit volume was down. That came as retailers took a careful approach to building up stock ahead of spring, and because consumer takeaway at retail softened. Beyond our customer working down its inventory, we cut output at our plants so we could keep bringing inventory levels back to normal and strengthen cash flow. The upshot was less fixed cost utilization at our facilities, and that largely canceled out the MAP 2025 gains we delivered in the third quarter. Inflation persisted, with material costs up 2.5% versus a year ago. Foreign currency was unfavorable again this quarter as well. Even with those pressures, we posted record adjusted EBIT for the third quarter, driven in significant part by strong implementation of MAP 2025 profitability efforts throughout the company, plus margin recovery in our consumer group. We are still on pace to beat our year one MAP ‘25 objective of $120 million in EBIT benefit. Now let’s look at sales by geography on the next slide. North America, accounting for 76% of third-quarter sales, posted the fastest growth at 8%, and Latin America came next, with sales up more than 7%. Both regions are helped by solid infrastructure and reshoring-related spending. Europe was the softest region for growth once more, with sales down 3.6%. Foreign exchange rates stayed a significant drag in the quarter, lowering total sales by 2.3%. Without those FX headwinds, sales would have risen in every region, in the mid-single to mid-teen percentage range. At this point I’d like to hand the call to Mike LaRoche, who will walk through our financial results in greater detail.
Michael Laroche
executiveAppreciate that, Frank. Our consolidated sales came in at $1.52 billion, up 5.7%, marking a third quarter record. Organic growth accounted for 7.3%, or $104.3 million, while acquisitions minus divestitures added 0.7% to sales, or $10.4 million. Currency movements cut sales by 2.3%, or $32.4 million. Consolidated adjusted EBIT rose 4.2% to $83.9 million, also a third quarter record, versus $80.6 million in the same period last year. Adjusted diluted earnings per share landed at $0.37, compared with $0.38 in Q3 2022. That decrease mostly stemmed from interest expense climbing to $30.8 million from $22 million a year earlier. In Q3 2023, we removed a number of items from adjusted EBIT and adjusted EPS because they don't reflect our continuing operations. Before taxes, these consist of $59.2 million in MAP 2025-related expenses, including $39.2 million of non-cash impairment charges in PCG tied to a go-to-market strategy shift in Europe, a $25.8 million gain on selling the non-core furniture warranty business and other assets within our SPG segment, plus a $20 million gain from an insurance recovery in our Consumer segment. Now let's turn to segment results. On Slide 7, our Construction Products Group posted record third quarter net sales of $497 million, up 3.1% from the prior year period. Organic sales rose 4.3%, acquisitions added 1.4%, and foreign currency translation subtracted 2.6%. Pricing increases and strength in concrete admixtures and repair products drove the sales growth, helped by market share gains along with infrastructure and reshoring-related spending. Demand for restoration systems covering flooring, facades and parking structures also lifted CPG's revenue. Partly offsetting that growth, demand stayed weak across residential and certain commercial construction markets, including the effect of customer destocking. Sales in Europe likewise remained soft. Adjusted EBIT was $13.3 million, down 62.1% from the prior year period's $35.1 million. Unfavorable fixed cost utilization stemming from lower customer demand and internal inventory normalization initiatives that cut production at our plants caused the decline. Keep in mind, CPG was up against tough comparisons from the prior year, when adjusted EBIT climbed 89.7%. Moving to the next slide, the Performance Coatings Group delivered record fiscal third quarter net sales and adjusted EBIT. Revenue reached $299.6 million, rising 10.6% versus the prior year period. Organic sales grew 13.2%, acquisitions contributed 0.8%, and foreign currency translation was a 3.4% headwind. Pricing and volume growth across nearly all its businesses drove sales, with fiberglass grading, protective coatings and flooring systems all posting strong growth. These businesses target fast growing vertical markets, benefiting from continued spending on reshoring and infrastructure projects. Strong energy demand also boosted the segment's growth. Adjusted EBIT climbed 16.4% to a third quarter record of $31.2 million. This increase came about because of robust sales and the advantages of MAP 2025, though currency exchange challenges partly counteracted that. On top of solid performance during 2022's third quarter, when adjusted EBIT rose 89.9%, this expansion was accomplished. Non-cash asset impairment charges totaling $39.2 million, which I mentioned earlier, are not included in PCG's adjusted EBIT. Now looking at Slide 9, the Specialty Products Group posted record third quarter sales amounting to $191 million, up 0.9% from the same period last year. Organic sales rose 2.2%, divestitures net of acquisitions subtracted 0.2% from sales, and foreign currency translation created a 1.1% headwind. Strength in the disaster restoration business, which managed to respond swiftly to December's deep freeze and California's flooding thanks to earlier investments aimed at boosting operational efficiency, led third quarter sales. Furthermore, the Food Coatings and Additives business achieved double-digit growth, propelled by a strategic refocus of sales management. Price increases responding to ongoing inflation also added to sales growth. Businesses serving OEM markets offset this growth, facing weak demand from the combined effect of economic pressures and customer destocking. SPG adjusted EBIT came to $16.8 million, a 37% decrease from the prior year period. Unfavorable mix and reduced fixed cost leverage caused this decline. The $25.8 million pre-tax gain from selling the non-core furniture warranty business and other assets is excluded from adjusted EBIT. Moving to the next slide, the Consumer Group's sales rose 7.5% to $528.5 million, a third quarter record. Organic sales climbed 8.9%, acquisitions added 0.3%, and foreign currency translation was a 1.7% headwind. Price increases meant to catch up with ongoing cost inflation drove the Consumer Group's sales growth. Volumes fell as retailers grew cautious about raising inventory levels ahead of the spring season, and also due to a slowdown in consumer takeaway. Adjusted EBIT reached a third quarter record of $48.3 million, up 180.4% from the prior year period. Successful execution of MAP 2025 initiatives along with solid sales gains were the main reasons profitability improved. As a reminder, the Consumer Group saw unusually low profitability during 2022's third quarter because an explosion at an alkyd resin supplier's plant triggered severe supply disruptions, and because high material cost inflation wasn't offset by matching price increases. This drove the strong year-over-year growth. Also, third quarter 2023 adjusted EBIT omits the pre-tax effect of a $20 million gain tied to receiving a business interruption insurance recovery; that recovery stemmed from lost business in the prior year caused by the alkyd resin supplier's explosion. Turning to Slide 11, we kept returning cash to shareholders throughout the third quarter. Dividends took up $54.2 million, and buybacks accounted for $12.5 million, which puts our combined fiscal year-to-date figure across those two categories at $197.3 million. Turning to working capital, we've discussed a number of times on this call the steps we're taking to bring inventories back to normal levels, since they had been built up to make our supply chain more resilient when raw materials were hard to come by. Those efforts are currently dragging down profitability in the short term, but other parts of our financial statements are beginning to show encouraging signs. Cash flow from operations came in at $72 million during the third quarter of 2023, versus a negative $3 million during the same period a year earlier. Since the close of November, inventory has come down by $48 million, and we anticipate that our work to normalize inventory will keep delivering working capital benefits going forward. I'd also like to give you an update on when our debt comes due. As a reminder, back in January 2022, we pre-funded a bond maturing in November 2022 at an appealing fixed rate of 2.95%. Then in August 2022, we pushed out the maturity on a term loan to 2025 as well as our revolving credit facility to 2027. Because of that, we hold substantial liquidity exceeding $840 million, with nothing maturing before May 2024 and the bulk of our debt not due until 2027 or beyond. At this point, I'll hand the call to Matt for a business update.
Matt Schlarb
executiveThanks, Mike. Over the last few years, shifts in politics and society have generated transformative pressures that are fueling spending on new builds and upgrades across the globe. Slide 12 shows a handful of these transformative catalysts, together with the ways our businesses back these developments. Energy stands out as the primary transition zone. Whether it's supplying protective coatings for wind turbine blades or boosting safety at LNG sites through tailored fireproofing approaches, our engineered offerings and services assist in building and safeguarding the infrastructure that is broadening and securing energy supply. On top of that, we provide numerous solutions for energy savings, applicable to newly built and already standing structures. We've discussed many times how manufacturing capacity is moving nearer to its customer base — or reshoring — and this continues throughout a number of vertical markets, with electric vehicles among those drawing major investment. Around the world, evolving consumer tastes are fueling considerable expansion for EVs, along with the batteries and the power dynamics involved; we're enabling this shift by delivering engineered solutions for the plants turning out EVs and batteries to satisfy that rising demand. Turning to Slide 13, legislation is aiding in speeding up these shifts; beyond stimulus enacted in 2020 and 2021, through which we gain from greater outlays on infrastructure and institutions, the U.S. Congress lately approved legislation anticipated to boost reshoring of manufacturing capacity into North America over multiple years. The first item is the chipset, holding notable incentives for making microchips within the U.S. A number of chipmakers, with whom our ties are strong, have kicked off projects or declared added capacity in the U.S. The second item is the Inflation Reduction Act, which broadened the tax credit for EV purchases in the U.S., conditioned on a proportion of the battery being built in North America. Consequently, a rising count of construction projects for EV battery manufacturing plants in North America have been declared or are in progress. Now, let's examine the part we play in these facilities. On Slide 14, building and running EV battery and assembly facilities brings tough, particular demands, and our engineered products are built to satisfy them. A few illustrations include Euclid Chemical, supplying various admixtures and additives that aid the facility's foundation. One instance is a high-range water reducer that cut the quantity of both water and portland cement required while building. In addition, Euclid Chemical provides TUF-STRAND patented macro synthetic fibers, employed to substitute for steel reinforcement, delivering stronger 3D defense against cracking, shortening construction timelines, enhancing worker safety, and improving overall durability of a facility's concrete applications. Another is Carboline's Thermo-Sorb VOC, applied to interior steel structures to deliver as much as 3 hours of passive fire protection. It has undergone thorough outgassing testing for clean room settings and EV plants and can be applied swiftly on site to keep large projects on schedule. To wrap up, Stonhard's Stonclad GS epoxy motor floor system delivers the abrasion and impact resistance that a manufacturing facility requires. On top of that, Stonclad GS manages static electricity — something essential in a clean room setting — and it also stands up to chemicals. And crucially, Stonhard handles the installation itself, so the project gets done correctly and on schedule. To illustrate the agility Frank mentioned earlier, a couple of years back these businesses were focused on warehouse construction, which was expanding rapidly at that point. Once that construction segment decelerated, we managed to shift toward this rapidly expanding sector, thanks to the entrepreneurial spirit of our team and our robust lineup of products and services. Turning to the next slide, I want to call out one more growth engine for RPM: innovation. Launching new products has sat at the heart of RPM's growth strategy for decades. R&D has continued in recent years; even so, the arrival of new products was constrained by supply chain disruptions. With those problems now mostly behind us, we're back on offense. Take our Consumer segment, for instance: Rust-Oleum just rolled out its largest spray paint innovation in more than a decade, the custom spray 5 in 1. Thanks to patent-pending spraying technology, someone using it can tailor what comes out of the can to suit the task just by turning the dial. These 5 spray patterns boost precision, cut down on drips and lower waste. What's more, the stop rust advanced formula delivers 30% better corrosion resistance and color retention than the traditional stop rust formula. We're launching this product alongside a sophisticated omnichannel marketing campaign that will connect with users at every stage of their shopping journey. The QR code on the slide offers one illustration of that. <<inaudible>> Hi, everyone. Yes; we're sorry about that technical interruption. I'll hand the call back to Rusty, who will begin at the start of the outlook section.
Rusty Gordon
executiveAbsolutely, Matt, thank you. The tough economic environment we saw during the third quarter has persisted, and in certain cases it has grown even more severe, since higher interest rates and tighter credit availability have led customers to act with greater caution. Our strategically balanced business portfolio and our emphasis on repair and maintenance do help shield us from economic downturns, but we are not fully protected, and that fact shows up in our guidance. Turning to sales by segment, we expect CPG to fall by a low to mid-single digit percentage compared with last year's record sales, which rose 18.5%. We anticipate that strength in concrete admixture will be more than outweighed by ongoing softness in particular sectors like residential and office construction, while distributors are keeping inventory beneath historical averages. PCG should rise by a mid-single digit percentage, since the segment keeps gaining from infrastructure and reshoring project spending along with MAP 2025 benefits. That growth comes on top of last year's record results, when sales climbed 16.3%. SPG fell by a low double digit percentage relative to last year's record results, when sales rose 11.4%, as OEM markets, which are economically sensitive, are expected to stay weak. On the consumer side, we saw a mid-single digit percentage increase. That's because pricing went up, but it was partially canceled out by lower volumes. Those lower volumes came from softer consumer takeaway, plus retailers holding back on inventory as they get ready for their busier months. This gain follows last year's record numbers, when sales were up 8.6%. Overall, for the fourth quarter of 2023, we're looking at consolidated sales staying flat compared to last year's record, when they grew 13.7%. Turning to EBIT: we expect fourth quarter fiscal 2023 adjusted EBIT to come in somewhere between flat and down high single digits, compared with the record we posted in the fourth quarter of fiscal 2022. That range reflects the economic ambiguity we expect in the months ahead. It also accounts for the hit from reduced utilization of fixed costs, which comes as customer demand softens and we work to bring inventories back to normal levels, along with increased pension and insurance costs unrelated to service. Under this guidance, full year 2023 sales would rise 8% to a record $7.2 billion, and adjusted EBIT would land at roughly $815 million to $835 million — a gain of 15% to 18% compared with fiscal year 2022. Each of those numbers would set an annual high. With conditions this challenging and unpredictable, our focus is on the things we can influence. This covers, as part of MAP 2025, our ongoing work on data-driven efforts aimed at making profitability structurally better, drawing on the solid position we hold in markets that gain from infrastructure spending and reshoring, rolling out new offerings across the coming quarters — among them the Rust-Oleum custom spray 5 in 1 aerosol paint Matt referenced a moment ago — putting priority and investment behind our biggest growth opportunities, cutting costs and matching resources to demand, and keeping attention on cash flow, which includes steps to bring inventories back to normal levels. Once we look beyond Q4 to the beginning of fiscal 2024, the economic environment continues to limit how much we can see clearly. Even so, we anticipate that a lot of the favorable tailwinds within our control will persist, while some profit-related headwinds begin to ease — among them inflation in material costs and the drag from underabsorption as our inventory normalization efforts reach completion. That wraps up what we had prepared to say. At this point we would be glad to take your questions.
Frank Sullivan
executiveGood morning, John.
John McNulty
analystYes. Morning, Frank, and thanks for fielding my question. Turning to the construction markets specifically, it appears there's some softness in that area, and that's where a great deal of the inventory reduction appears to be happening both on your end and on the customer end. I suppose, could you assist us in thinking through when you've worked past that — and it sounds like you might be past much of it by the time the fourth quarter arrives — how much might the conclusion of destocking alone benefit the margin and profitability of that business? It's somewhat difficult; this was a quarter in which your sales were roughly consistent with what had been expected, yet admittedly, earnings arrived on the lighter side. So my suspicion is that a large portion of that stems from the destocking. So I'm simply attempting to gain a clearer sense of what things look like once destocking finishes.
Frank Sullivan
executiveSure. Regarding the effect of our own destocking efforts alone, our best estimate is roughly a $20 million reduction to gross profit. Additionally, we've stopped production in several areas where, in the past, we wouldn't have done so, and we truly sought to implement measures that would bring our inventory levels into better shape, since they've been out of balance for roughly the last 18 months relative to the supply chain disruptions that manufacturing is encountering just about everywhere. I would anticipate that our destocking efforts in Q4 will produce an equivalent effect, or perhaps a marginally larger one, given the higher revenue level during that period. And then clearly, the additional absorption hit we absorbed during the quarter — and would anticipate absorbing somewhat, especially within the Construction Products Group in Q4 — is simply tied to reduced unit volume.
John McNulty
analystUnderstood. All right. No, that's useful context. Then regarding inputs, it really does seem as though raw materials are beginning to decline fairly sharply across many of the material categories that I believe you're involved in. I suppose when you consider what you're currently purchasing items for, granted, some time will be needed before it flows through the P&L; yet how much cheaper have they gotten? What sort of benefit should we expect as you gradually move past the pricier inventory sitting in your system?
Frank Sullivan
executiveCertainly. A handful of exceptions remain quite significant. Metal packaging rose more than 50% versus the prior quarter, and certain resins such as alkyd continue to climb. Yet overall, during the quarter, we saw a 2.5% increase compared with the same period last year. And — however, on a sequential basis, things are beginning to trend favorably. Thus, comparing Q3 with Q2, we're observing roughly a 7% gain.
John McNulty
analystUnderstood. All right, many thanks. I appreciate your responses.
Frank Sullivan
executiveThanks.
Frank Sullivan
executiveGood morning.
Aleksey Yefremov
analystThanks, and a good morning to everyone as well. The topic I'd like to raise is destocking versus genuinely softer underlying demand. What's the way to distinguish the two? And when it comes to your volumes, how would you characterize the breakdown across those two buckets? On top of that, is there anything suggesting that destocking at your customers is letting up or improving relative to the conditions you saw back in early January?
Rusty Gordon
executiveCertainly; this is Rusty. As for the third quarter, what we observed really splits into a couple of pieces. One was the absorption impact caused by weaker demand, and the other was destocking on the part of our customers. On top of that, RPM has been working to bring inventory back in line, cutting our balance by $48 million compared with where it stood when the second quarter closed. Taken together, those two factors produced roughly a $20 million blow, as Frank mentioned — a level we don't normally see. In a worst-case scenario it could land around $10 million, perhaps slightly above that. Either way, Q3 earnings clearly took an outsized hit.
Aleksey Yefremov
analystAnd as a quick second question on that, I believe what I was really asking about was the destocking patterns themselves. Is there any sign you're picking up that suggests your customers are getting nearer to wrapping up their destocking?
Frank Sullivan
executiveYes, my sense is that you'll watch us, along with supply chains broadly, gradually return to a typical state during late spring and summer this year. So my expectation is that many of these destocking levels — the actions we're taking and what we're observing at customers, in both our industrial businesses and our consumer businesses — will be more or less right-sized or normalized come this summer. The matter of unit volume, though, stands apart. And the area where weakness is most pronounced is our construction product and construction chemical space.
Aleksey Yefremov
analystThank you very much.
Frank Sullivan
executiveThank you.
Frank Sullivan
executiveMorning, Josh.
Josh Spector
analystHi there, morning, and thanks for taking my question. So in the remarks on your outlook slide, you mentioned tightening credit pressures along with interest rates. Clearly, everyone is aware of the strain in resi. I suppose, could you speak to whether you are in fact observing effects there, on the commercial side, that differ today compared with roughly a month back? And does that play into your order book and visibility at all?
Frank Sullivan
executiveSure; I would begin by separating coatings from construction. Our coatings operations sit mainly within our Consumer Group along with our Performance Coatings Group. Looking at those, I believe our results are quite solid relative to coatings peers that are more comparable. Sales in consumer rose 7.5% on top of a record quarter a year ago, alongside really robust EBIT margins and margin recovery. Turning to our Performance Coatings Group, I would note their markets differ — they are infrastructure and largely fueled by industrial capital spending. Revenue there climbed 10.5%, and EBIT increased 16.4%. Within the coatings arena, we view those businesses in those categories as remaining fairly strong for multiple reasons. At our Construction Products Group, a slowdown has affected what has expanded to nearly $300 million in residential new construction across North America. Also, the commercial and light commercial portion of that began turning negative in January, and it has been declining in each of the months so far in calendar ‘23. My expectation is that those construction market trends, especially residential new construction and commercial construction, will persist through the remainder of calendar ‘23.
Josh Spector
analystAll right. That does help. And I suppose, if I may ask a follow-up, could you speak to this along similar lines? Has your backlog been shrinking in that area? What I mean is, for a certain portion of what you sell, you handle the installation. At this moment, are you noticing any shift in demand? Or do you expect things to soften?
Frank Sullivan
executiveOnce more, let me split that into two parts. When it comes to spending on industrial capital, order books look quite robust on the flooring side of our operations. Within our flooring business, they perform their own application, and we are observing solid order volume flowing into Carboline protective coatings and into our fiber grade operations. The genuine ups and downs that would either land us at our forecast or let us turn in somewhat stronger results than what we presently expect sit in our Tremco roofing business, where we likewise handle a great deal of the application work ourselves in order to take on the entire contract. Our order book is quite solid, yet it appears to have slid further out, into the spring and the summer. So, returning to what I said before, we have now watched 3 straight months of weakening in commercial construction activity. Therefore, I believe this spring — late spring, early summer — will reveal whether the backlog for the Tremco Roofing business begins to get filled. The encouraging part regarding that business is that 95% of it is reroofing and/or maintenance and repair rather than new construction; however, as the results show, our Construction Products Group has gotten off to a soft start in the calendar year.
Josh Spector
analystUnderstood. Thank you.
Frank Sullivan
executiveThank you.
Steve Byrne
analystYes, thank you. In the quarter, what portion of revenue growth came from price as opposed to volume? To offset the raw material cost inflation observed across the past couple of years, what additional price would be required? What size of a gap remains to return to the EBIT margins you would like to see?
Frank Sullivan
executiveSure. Steve, on a consolidated basis during the quarter, price accounted for roughly 13%. In — the sole area where — by segment, although we don't give price or unit volume by segment, the one place with fairly consistent strong unit volume growth was our Performance Coatings Group. Conversely, consumer POS has declined month by month within what we'd term the low to mid-single-digit range. And once more, that's another category we're monitoring with regard to any improvement or strength this spring or summer.
Steve Byrne
analystAnd Frank, how far do you have to raise that price so that the raw material costs from the past 2 years are recovered?
Frank Sullivan
executiveAcross most categories, we've gotten to the point we need to reach; certain of our roof coatings operations, along with a few of our other coatings operations tied to particular raw materials, have seen some pricing actions from us. Our consumer segment still presents certain difficulties, especially involving metal packaging, which stands among those exceptions at 55% year over year. Prices for alkyd resins have ticked up somewhat there, as has TiO2. So certain difficulties remain there that we'll aim to respond to, and as for what price does over the next quarters, the probable outcome is either unchanged or higher.
Steve Byrne
analystOkay. Thanks, Frank. Could you talk about what size customer Walmart is for you, and whether any projects you have going there might be in jeopardy because of this new deal with PPG? I remember you had some kind of e-commerce paint operation with Walmart, I believed. Could you perhaps bring us up to date on that?
Frank Sullivan
executiveSure. We don't break out revenue for individual customers, but as we mentioned on earlier calls, there was the wall paint project, interior and exterior, that was fairly recent — 1.5 years back — at Walmart. And I did see the PPG news that came out recently; when it comes to that new announcement PPG released yesterday, we were not the net loser. Starting from essentially zero wall paint in North America with Walmart 2 years ago, we're going to exceed $20 million in interior and exterior wall paint, and it keeps growing. So that's a category for us. That category is getting reshuffled thanks to the PPG announcement and the swapping out of a big vendor. We aren't that big vendor. And like I said, we're above $20 million and expanding, from a wall paint program at Walmart that stood at zero 2 years ago.
Steve Byrne
analystThank you.
Frank Sullivan
executiveThank you.
Frank Sullivan
executiveMorning, John.
John Roberts
analystMorning, Frank. During the alkyd shortage, you shed share in Rust-Oleum. At what point do you expect to return to the share you had before the shortage?
Frank Sullivan
executiveThat question doesn't have a good answer from me. What I understand is that the spray paint positioning held by a few of our rivals — and that exists only at Home Depot, and it isn't growing — but regarding when we'd recover that share, I lack a good answer, except to say that from where we sit on capacity and supply chain, we could reclaim all of it right now.
John Roberts
analystAll right. So if we set aside that impairment charge, MAP costs came to $20 million during the quarter — how do you see that moving going forward?
Frank Sullivan
executiveI'd say approximately the same. Things are going quite well with our MAP program. Honestly, I believe we're sitting in a genuinely strong spot once you factor in both the MAP initiatives and that $20 million gross profit hit on its own; and once more, let me be clear that the destocking we were under reduced our P&L by $20 million. So as the MAP initiatives keep moving forward and as throughput returns to normal, with inventory levels sitting where they ought to be — and we're working toward that — under the right circumstances, you'll see a really nice snapback in gross profit margins.
John Roberts
analystThank you.
Frank Sullivan
executiveThank you.
Frank Sullivan
executiveMorning, Jeff.
Jeff Zekauskas
analystHello, good morning, and thank you so much. Suppose you needed to split that $120 million of MAP savings among your divisions — how would you go about it, or does it simply follow sales on a proportional basis?
Frank Sullivan
executiveWhen it comes to the divisions, I'm not sure I can give you a solid response there, and we would need to examine it, and I'm not certain we'd share that level of detail; sales are what drive it. The bulk sits in places that affect gross profit margins; so it involves using data to handle mix more effectively, it involves still finding some procurement savings relative to where pricing stands as we bring more categories together, and there's a tremendous amount of MS 168 activity happening across our small to medium plants; so the biggest portion of MAP '25 work is going to appear in our gross profits; and seen that way, it turns up in our gross profit whenever we make a sale. And so it will rise or fall quite a bit alongside our seasonality, since our business is seasonal, with a strong fourth and first quarter and a somewhat weaker second, plus obviously a weak third quarter right here.
Jeff Zekauskas
analystAnd next, perhaps a question for Rusty — during the quarter, your payables came in $100 million below the prior-year figure. Do you expect payables to also be down year-on-year when the fourth quarter arrives?
Rusty Gordon
executiveWell, Jeff, thinking about our purchases, if we go back exactly 1 year, we were likely buying more to build in resiliency given supply uncertainty, and that's not where we are now. So my expectation would be that purchasing, and likewise payables, won't reach the same level this year as they did last year.
Jeff Zekauskas
analystAll right, that's excellent. I really appreciate it.
Rusty Gordon
executiveSure thing.
Frank Sullivan
executiveHello, Mike, good morning.
Mike Harrison
analystMorning, Frank. Hey, everyone. I was hoping you two might be willing to spend a moment discussing 2024. Rusty, I believe during your remarks you noted that visibility isn't great, yet you anticipate that certain internal steps you're taking will keep helping and that a number of these cost pressures will ease. Still, as we begin shifting our focus toward fiscal '24, it would really be helpful if you could offer any modeling guidance around sales growth, margin improvement, or earnings growth.
Frank Sullivan
executiveAbsolutely. Let me share a few general thoughts with you on that, Mike, and then we'll be able to give additional specifics once we report our fourth quarter in July. That said, I think volume clearly stands out as a critical thing to watch. The reason I say that is during the back half of '23, we're going to absorb a hit of roughly $40 million to $50 million tied to our own efforts to destock and level out inventory. That's separate from whatever effect comes from reduced unit volume. Once we fix those things and throughput gets back to a more typical level, we ought to see a substantial gain in gross profitability, especially during the latter half of next year, so that's worth keeping in mind. As I said before, and this is essentially restating it, we're seeing solid backlogs along with robust growth in our Performance Coatings Group, fueled by infrastructure and capital spending, with industrial capital spending closely matching what Matt described. We expect consumer takeaway to improve, and, as Rusty noted, we're operating on the offensive in our consumer business in a manner we've done over the last 2 years when it comes to supply chain challenges, and we're feeling fairly confident about that. My view is that residential and commercial construction markets will remain difficult through the remainder of calendar '23, and we're taking the steps necessary to adapt, though we don't expect those underlying markets to improve, most likely, until next year's spring. Past that, I think we'd give — we will give additional specifics both on a consolidated basis and generally by segment at the time we report results for our year ended July.
Mike Harrison
analystOkay, thanks. That's a big help. Then my second question was about the consumer side of things. You seemed to say that your main retail partners are holding inventory at low levels and staying cautious as the busier season approaches. Any perspective on how you expect the DIY season to unfold, and could inventory levels rise depending on — I'm not sure what the main drivers would be, whether it's weather, or what happens with interest rates, or other consumer-related factors?
Frank Sullivan
executiveSure. Like I said before, what we're observing — and it's been fairly steady over what I'd describe as the past 4 months or 5 months of POS, meaning consumer takeaway — is a decline in the low to mid-single digits. My expectation for us is that we'll get some betterment on that front, including on the consumer takeaway side. Beyond that, I think once this spring has passed, inventory corrections will be finished for both us and our customers; so any buying that occurs will show up in our sales rather than a gap opening between what consumers purchase and weaker unit volume growth tied to internal and external inventory corrections, and we're being aggressive. We've got new items, including a newly patented spray foam product that's heading into several of our retail partners under DAP. There's also a patented new spray nozzle that will debut first in Stops Rust, shipping within the next few weeks, and it'll appear at retailers across the summer — by summer's end, or early fall, we ought to be broadly present across our retail distribution. That has us excited, and in May we'll kick off a bigger advertising and promotion push behind it, which will run through the summer. So our hope is for solid results there and an increase in that segment; and finally, returning to an earlier question, the share loss, especially the one at Home Depot over the last 12 months, we think is finished. Whether we win that business back, only time will show. But our understanding is that this position is now settled where it stands.
Mike Harrison
analystGreat. Thanks very much.
Frank Sullivan
executiveThank you.
Frank Sullivan
executiveMorning, Ghansham.
Ghansham Panjabi
analystThanks. Morning, Frank, and hello to everyone else. Frank, let me pull back for a second. Clearly you sell into a number of end markets that respond to interest rates, and naturally, rates have climbed substantially during the last year. With rates higher, do you notice anything meaningful that's playing out differently this time around, or is it all basically unfolding the way you'd expect given what history shows? I'm asking this partly in the context of raw materials, which tend to be fairly sticky…
Frank Sullivan
executiveSure. To begin with, at least when you look at it through a manufacturing lens — and this isn't just us, you can observe it across various segments — we're in a plain, old-fashioned recession. Like I mentioned before, the more cyclical operations — and we're definitely seeing this in our more cyclical operations — are going through that, and they'll keep going through it for the remainder of calendar '23. So my hunch is that all those fancy economists who call recessions, as you'll remember, generally look around, I don't know, August or September and announce, hey, a recession is here and it actually began in February. So I believe we're in one. What I think is unusual this time is the thing we discussed on the prior call and again on this call: we've never dealt with the widespread destocking that we've had to tackle here, both at our own inventory levels and at the inventory levels within our industrial segments and channels. Over time, we've had sophisticated consumer customers who keep finding ways to cut inventories, and we've watched those inventories move up or down. Historically, up until this stretch, when we discussed destocking, it essentially involved only our consumer segment. So that, I think, is the difference. We've never dealt with the kind of overhead un-absorption — stemming purely from our own inventory moves — that we dealt with in Q3 and that will carry into Q4. Looking at the bigger picture, I think that's actually good news down the road, because once it ends, tens of millions of dollars in gross profit will land on our bottom line. And as I've mentioned, I'm genuinely bullish about how positively our MAP '25 initiatives will pay off. Once our inventories are where they should be, we'll quit hurting ourselves through those overhead absorption hits. And assuming volume comes back, if we go through a down cycle in commodities, I still believe there's solid potential ahead for a strong gross margin rebound in the years to come.
Ghansham Panjabi
analystMy apologies, Frank, in case I overlooked this — what do you figure the effect was, strictly from customers drawing down their stockpiles, on your 3Q volumes, which I believe declined by mid-single digits?
Frank Sullivan
executiveRight; so my estimate is $20 million — $40 million altogether. And the way to look at it, I think, is $20 million of reduced unit sales volume throughout RPM plus $20 million tied to inventory corrections inside our own company — literally, at quite a few of our sites, that meant cutting shifts and even pausing output for days or a week straight, something I cannot recall happening. In past downturns and similar situations, we have cut shifts in some locations. But a handful of plants were shut down by us for a week, and that is remarkably unusual for RPM over the course of my career.
Ghansham Panjabi
analystThanks, Frank.
Frank Sullivan
executiveAppreciate it. Indeed, an easy method to bring your inventory down is to simply halt production; that's part of what took place during the quarter.
Frank Mitsch
analystThank you so much.
Frank Sullivan
executiveGood morning.
Frank Mitsch
analystYes. Good morning, Frank. Thanks a lot. To build on MAP 2025, that's a plus for your numbers. When I look at the 240 to 260 EBIT for Q4, how much of that do you figure MAP will account for? And can you give any sense of what's required to land at the low end versus the high end of that Q4 EBIT range?
Frank Sullivan
executiveWell, Frank, like I said before, sales are the largest contributor to the MAP gains flowing through our P&L, since the bulk of those benefits sit either in prior margin — where we're handling mix more effectively — or in conversion costs. And on both fronts, we're coming along well. Clearly, the other piece here is starting to show up, which I believe you're seeing as Q4 wraps up and we move into summer: some favorable movement on past price increases from the last 18 months within our raw material basket, which is beginning to improve sequentially. So those are the elements. It's definitely going to exceed the $20 million we saw in Q3, simply because our revenue base will be larger, and just how strong it can be truly hinges on unit volume sales.
Frank Mitsch
analystFrank, understood. Then, Rusty, you mentioned the working capital gain you expect during Q3. Of course, Q4 usually consumes cash where working capital is concerned. I'm wondering whether you've formed any view about the approximate size of that for the upcoming quarter.
Rusty Gordon
executiveRusty: Absolutely. In Q3, the inventory gain was essentially cancelled out since our payables declined versus a year ago after we stopped buying. So I believe the real advantage will show up in later periods, such as Q4 and the first quarter of fiscal '24, because despite the improvement visible on that single line labeled inventory, it has been neutralized on the payables side by our lower purchasing. Still, we'll keep taking additional steps under MAP 2025 to shrink the finished goods we hold, and that should produce a structural gain. Yet Frank, when it comes to working capital, I'd say our strongest days lie ahead. During Q3 we began getting the ships pointed the right way. The gain, though, should appear in cash flow from operations going forward.
Frank Mitsch
analystThank you so much.
Rusty Gordon
executiveYou’re welcome.
Frank Sullivan
executiveMorning, Mike.
Mike Sison
analystHey everyone. Good morning. Frank, over the past 2 years you've really driven a lot of enhancements into the business, and you've pointed out that we're sitting in a recession; so I'm simply wondering, perhaps just broad reflections on how the new portfolio and the new businesses ought to fare during a recession. And it ought to probably be more resilient than previously. And just your present thinking there — should they manage to grow, stay flat, decline? What sort of thoughts do you have on how the new RPM would do?
Frank Sullivan
executiveAbsolutely. I believe 2 elements exist there. First, we've enhanced our conversion costs throughout every area; and once volume returns, that will become visible. Second, I believe our performance is fairly strong considering the underlying dynamics. The single drawback relative to historic RPM that exists for us now which wasn't there before, and it stems from the robust expansion of Nudura in North America insulated concrete forms plus a few other elements that, that has carried with it is currently, we hold roughly a $300 million total exposure to residential new construction. And previously we didn't carry nearly that level of exposure to residential new construction; and so that is damaging us right now. I can share that within our Specialty Products Group, the segment damaging us the most is our OEM coatings there; and we possess a highly successful, nicely profitable wood stains and finishes group, and it feeds directly into housing. We perform considerable work with domestic window manufacturers; we perform considerable work with domestic cabinet door manufacturers. Some furniture, though the bulk of that has relocated offshore. And every bit of that coating lands on components that are typically tied to residential construction. So, that's likely the softest area for us right now and an exposure on a much bigger RPM that although bigger, we lacked previously. With luck, that helps.
Mike Sison
analystRight. One short-term thing — I don't know whether you've got those figures handy, but did total March results come in stronger than February's? Then, regarding what you're projecting for Q4: typically April outpaces March, and May beats April. It sounds as though the quarter-over-quarter gains won't amount to much as we move through the period. Should we frame it that way?
Frank Sullivan
executiveOnce more, Mike, I'm simply restating what I said before; within the units of ours that feel cycles most, January, February, and March were weak. You can observe that in the Construction Products Group along with the Specialty Coatings Group. The backlog at Performance Coatings Group, I can report, looks solid. We anticipate that will hold up. As Matt pointed out, substantial sums going into infrastructure and propelling industrial capital expenditure; therefore, caution has ample justification, which explains the broad range we've given for Q4. A few items worth watching for potential upside, I'd note: consumer POS strengthening come springtime. That might deliver an upside. Our Roofing division gaining ground in spring and summer. That too, being a piece of our construction products operation, has lagged against last year's record figures. And in Europe we're beginning to notice a bit of sequential pickup. Part of that is merely lapping softer comparisons. So those are the factors we'll be watching in spring and summer as potential boosts beyond the guidance we've issued.
Mike Sison
analystThanks.
Vincent Andrews
analystThanks, and good morning to all of you.
Frank Sullivan
executiveMorning.
Vincent Andrews
analystI've got two things I want to ask quickly. To start, you brought up electric vehicles — can you give us a sense of how much of a step up that really is, since as far as I can remember, you folks never had much of anything in the auto space? And does it take away from any sales you'd otherwise make into a vehicle with an internal combustion engine?
Frank Sullivan
executiveOf course. The thing is, auto isn't where these coatings end up, and automotive coatings aren't a business we're in, though industrial new construction is somewhere we're quite strong. That covers things like corrosion control coatings, assorted industrial components for steel or for mesh, plus more architectural decorative fireproofing coatings. On top of that, we hold a genuinely solid franchise spanning Stonhard, Euclid, Dudick, and quite a few flooring operations — be it concrete coatings, or in Euclid's case fibers used in concrete, or the polymer flooring itself. Across those spaces, we've been a global leader in microelectronics; and given how much influx and onshoring we're watching, some of it backed by government subsidies, we ought to come out as the ones who benefit. That takes in the manufacturing side — it takes in building these EV plants, and battery plants too; so all of those are strong areas for us when it comes to specification and work, yet every bit of it ties back to industrial capital spending or construction, never to automotive coatings.
Vincent Andrews
analystAll right. Great. And circling back to what's happening with the banks and how credit looks for customers, I mean, let's assume lending gets steadily tighter for people through the rest of the year and possibly costs even more. What is RPM able to do to help your customers through that? And are you beginning to hear already that customers are running into problems or considering pulling back simply because there'll be fewer dollars available to deploy into the markets?
Frank Sullivan
executiveSure. No impact is showing up in receivables. So right now that isn't a warning sign or something we're worried about, though we do watch it. The widest statement I can make is that the housing market has taken a hit and that keeps going. You can observe it in residential new construction, which has fallen sharply, and also in housing turnover, which has declined. Then the other segment that matters most is commercial or light commercial, hotels, office space. The era of the massive $1 billion Apple and Amazon new headquarters buildings has ended. So those are a few — those represent a few examples of sizable projects involving construction chemicals, sealants and products we participate in. So it's office space, hotel and hospitality, and every one of those areas is soft. So really it isn't a matter of credit or worry about receivables, it's simply more of a softness in those 2 categories of construction, mainly in North America.
Vincent Andrews
analystOkay. Thanks very much.
Frank Sullivan
executiveThank you.
Frank Sullivan
executiveMorning, Kevin.
Kevin McCarthy
analystMorning. How's it going, Frank?
Frank Sullivan
executiveDoing well, thanks.
Kevin McCarthy
analystAny fresh perspective you could share regarding how we might deploy capital soon — what the deal pipeline looks like against the option of paying down debt in these conditions, or perhaps speeding up buybacks?
Frank Sullivan
executiveAbsolutely. On buybacks right now, we're definitely halting the dilution. Occasionally we've stepped on the gas more; that hinges largely on our share price versus a valuation framework the Board and I review on a routine basis. As for acquisitions, I'd say activity has cooled. There's a decent volume of deal interest out there, yet some sellers still cling to multiples and valuations from the past even as their results weaken, which typically puts a damper on M&A. That deceleration is showing up in the small and mid-sized markets we focus on. And clearly, judging by the headlines, large-scale M&A has fallen off sharply for those same reasons. Even among private equity firms, the sizable staple financings that banks provided to PE have essentially vanished at this point. So the M&A market is quite sluggish, and my expectation is that it remains so. Discipline has always been a strength of ours, and we won't shell out the record-high multiples seen a few years back for someone's peak results from last year. Nor do I believe others will. So we may manage to pick up a small deal occasionally, but for fiscal '24 we don't see M&A playing a major role in our growth.
Kevin McCarthy
analystThat’s useful. And then, if I could ask a second thing: during your prepared remarks, you said you’re implementing further cost measures, and my read was that these sit outside what MAP 2025 covers — and MAP 2025 itself appears to be running above the range you targeted. So is there any way to put a number on the extra or incremental cost benefit we should anticipate as we go into next year?
Frank Sullivan
executiveSure. Right now, I’m not sure it goes much beyond $10 million. Depending on how things develop, though, it could be larger, and it falls within SG&A. It’s happening in a few of our Construction Products Group businesses that have been hit harder by recession, especially those we’ve discussed, plus our Specialty Products Group. As a result, we’ve carried out some expense cuts and workforce reductions across both segments. Conversely, we’re firmly committed to keeping up spending in a few places. Previously we discussed a patented adjuvant within the KopCoat portion of our Specialty Products Group. That patented product line essentially enables pesticides and herbicides to be applied at rates that are as much as 40% or 50% lower. A few years back, it amounted to a few hundred thousand bucks. This year, it will reach $3 million or $4 million, and its growth rate is tremendous. We intend to invest in it. It belongs to our Specialty Products Group, even with that segment’s deterioration. We discussed Nudura, and this year Nudura unfortunately has a solid presence in new residential construction. Here’s one illustration: last year we finished a new school in Kentucky, and the Nudura system played a central role in enabling that school to run at net zero. Among construction methods on the market for residential and light commercial — places such as schools — the Nudura ICF is one of the most durable. So we’ll be spending aggressively on promotion and specification work, despite this year’s revenue decline at Nudura. When it comes to energy efficiency, and when it comes to safety and security amid an environment of growing weather events, there is no better construction product area. So that’s one such area. Differently from before, we’ve experienced a substantial revenue drop caused by the residential construction pullback. In that category, our spending will rise this year by $10 million or more. And once again, certain SG&A areas within a Construction Products Group or Specialty Products Group will see us spend ahead as we build momentum for genuinely strong growth through greater spec and wider distribution in ‘25 and beyond.
Kevin McCarthy
analystVery helpful. Thanks a lot.
Frank Sullivan
executiveThank you.
Frank Sullivan
executiveMorning.
Arun Viswanathan
analystRegarding MAP ‘25, though — has any of your units turned out to be comparable when you look at margins? Also, would divestitures play any part at all in your net gains, or is it…
Frank Sullivan
executiveArun, your audio is cutting in and out somewhat, so I couldn't quite make that out.
Arun Viswanathan
analystIs this coming through at present?
Frank Sullivan
executiveYes, that comes across somewhat more clearly.
Arun Viswanathan
analystYeah. All right. My apologies, Frank. Yeah. No, I simply wanted to know whether any divestiture is going to be included in MAP ‘25, as opposed to mostly the current portfolio — from a MAP perspective?
Frank Sullivan
executiveCertainly. Across our portfolio, we are examining things closely when it comes to MAP ‘25. And without saying anything about future activity, there are two illustrations, and one of them — well, actually, both occurred during this quarter; we had the Guardian Protective Products business, which 10 years ago was in fact supplying fabric protecting product and then being part of the insurance around that for consumers; that business essentially turned into an insurance business for furniture. Even though that unit was very profitable and a good business, we didn't think we could keep competing there in the future. So during the quarter we sold it off, and the buyer was a combination of a private equity firm and another insurance and assurance company. It's a great fit for the Guardian Protective Products team, and the sale brought in a total of $50 million in cash along with a solid gain for the quarter, which we clearly excluded from our adjusted results. This was all part of MAP ‘25. We also booked an impairment charge related to our USL business during the quarter, and you saw that as well. That too was adjusted out of our adjusted results. However, when we looked into that operation, we found a piece of it tied to contracting. That piece was losing money, so we're now in talks with a few parties to hand it off to a UK-based contracting company, while keeping the product lines there that carry strong margins. The overall effect, then, will be lower revenue alongside better profitability and margins. Those two examples are ones we can talk about because they've already taken place — structural moves we're considering under MAP '25 — and more of the same could certainly come later.
Arun Viswanathan
analystOkay. Great. Thanks a lot.
Frank Sullivan
executiveThank you.
Frank Sullivan
executiveI appreciate everyone joining our investor call today and bringing your questions. We did face a difficult quarter, and we're taking a rather cautious stance regarding what Q4 will look like, yet I'd say we're genuinely enthusiastic about the steps we're putting in place — specifically within our MAP 2025 initiative, and also in grasping how inventory in particular is affecting us, along with the working capital changes that have to happen so our inventory positions return to proper levels and our cash flow gets back to where it ought to be. Those steps are positive ones. During the quarter they hurt gross profit and profitability, and that will be true in Q4 as well, but these are non-recurring items that we'll have moved past within the coming 2 months. So we stay enthusiastic about what we're doing and how it will affect our margins over the years ahead. We're eager to share additional specifics about fiscal '24 when our fourth quarter results come out and we discuss the close of '23 in July. Thanks once more, and a blessed Easter to everyone on this call, to you and your families. Thank you for taking part and for your interest in RPM. Have a wonderful day.
Operator
operatorThis call is officially over. We appreciate your participation in today's presentation. You are free to hang up at this time.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete RPM International Inc. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.
Get the API View API docs →This call discussed
For developers and AI pipelines
Programmatic access to RPM International Inc. earnings transcripts and 132,000+ others is available through the
EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments,
full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.
More tools for stock research
OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in RPM International Inc. or any ticker on your watchlist.
StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.