RPM International Inc. (RPM) Earnings Call Transcript & Summary

April 4, 2024

New York Stock Exchange US Materials Chemicals earnings 79 min

Earnings Call Speaker Segments

Matt Schlarb

executive
#1

Thanks, Jamie, and I'd like to extend a warm welcome to everyone joining RPM International's Fiscal 2024 Third Quarter Conference Call. On the line with us today is Frank Sullivan, RPM's Chair and CEO, who is joining remotely; Rusty Gordon, Vice President and Chief Financial Officer; and Mike Laroche, Vice President, Controller and Chief Accounting Officer. You can also listen to this call via webcast, either live or on replay, through the RPM website at www.rpminc.com. Some of what we say today might include forward-looking statements grounded in current expectations that carry risks and uncertainties, and those could lead to actual results differing materially. To learn more about such risks and uncertainties, please see the reports RPM files with the SEC. We might also refer during this conference call to non-GAAP financial measures. So that you can better understand these non-GAAP terms, RPM has posted reconciliations to the most directly comparable GAAP financial measures on the RPM website. In addition, please be aware that our remarks will be on an as-adjusted basis, and unless otherwise noted, every comparison is to the third quarter of fiscal 2023; a supplemental slide presentation supporting our comments today has been provided, and you can find it in the Presentations and Webcasts section of the RPM website at www.rpminc.com. Also, as a reminder, some businesses in Asia Pacific that used to fall under the Construction Products Group are now managed and reported within the Performance Coatings Group, effective June 1, 2023. Consequently, any references to CPG and PCG today reflect this updated structure. Those recast businesses produce roughly $100 million in annual sales, and our consolidated results are unaffected by this change. With that, I'd like to hand the call over to Frank.

Frank Sullivan

executive
#2

Matt, thank you — and I want to say how much we appreciate all of you being on today's call. My plan is to begin with the broad view of how we performed during the third quarter. From there, Mike Laroche will take you through the numbers. Following Mike, Matt will cover the balance sheet as well as the organic growth investments we're making in emerging markets, and then Rusty will lay out our outlook for the remainder of the year. After we finish our prepared comments, we'll gladly answer whatever questions you have. Let's turn to Slide 3 and our Q3 results. Along with our strategic balance and our emphasis on repair and maintenance, the positive momentum from our MAP 2025 operational improvement initiatives carried through the third quarter, producing our ninth straight quarter of record sales and EBIT results. Margins were up, and we posted our fourth quarter in a row of record cash from operations. Over this trailing 12-month period, cash flow from operating activities came to $1,260 million, well above any prior 12-month stretch in RPM's history. A large part of that reflects gains in working capital, an area where our MAP 2025 initiatives have been especially focused. Moving to Slide 4. Sales growth was driven by our Construction Products Group and our Performance Coatings Group. Both segments gained from their emphasis on repair and maintenance, and from their capacity to meet robust demand from infrastructure, reshoring and high-performance building projects through their engineered solutions. Favorable timing on certain project completions, especially within the Performance Coatings Group, helped drive sales growth in Q3. Given difficult market conditions, volume declines persisted in the Consumer and Specialty Products segments. Consumer was hurt by softer DIY takeaway and by retail customers who keep managing inventory levels tightly, partly offset by market share gains. While volumes fell in the Specialty Products Group, mainly because of tough comparisons in the Legend Brands disaster restoration business, we did see signs of stabilization in our core specialty OEM markets. As we expected, we saw favorable pricing in every segment as we work to offset inflation, and that includes the wage, benefits, and insurance inflation that's still running. Looking at the company overall, pricing increased about 1% from the prior quarter to this quarter; we posted record adjusted EBIT, since our MAP 2025 gains, which take in the commodity cycle rebound, pushed margins up 170 basis points. Every business gained from MAP 2025 efforts, especially the ones that grew unit volumes. Through all cycles, we have to keep putting money into efforts that draw on our entrepreneurial spirit and build volume growth, so we can capture the full value of the MAP work we've already done. We've made moves like boosting our production capacity, raising R&D investment by setting up our Innovation Center of Excellence, and sharpening how we use data to make decisions. On top of that, we're adding to our sales force and giving them training so they can drive more sales of higher-margin products, and we're also introducing new items such as DAP, a single-component spray foam for walls and cavities, which is helping us pick up market share this spring. Let's move to Slide 5. The favorable momentum we've seen from better coordination beyond the United States carried on through the third quarter, with emerging markets driving the company's growth because RPM places a strong emphasis on engineered solutions tied to infrastructure spending in those areas; over in Europe, we're capturing share through our targeted sales approach. Once you set aside the effects of a business we divested, regional sales came in about level even with macroeconomic challenges across multiple economies. And our efforts to put MAP 2025 initiatives into action in that region led to a solid EBIT margin gain. On the whole, I take pride in how our associates keep dedicating themselves to our MAP 2025 program, which has reliably delivered efficiencies, greater cash flow levels and record outcomes; we stay committed to widening margins, speeding up organic growth and enhancing cash flow so we can hit our MAP 2025 targets. At this point I'll pass the call to Mike Laroche to walk through our third quarter financial results in greater detail.

Mike Laroche

executive
#3

Appreciate that, Frank. Now let's turn to Slide 6. Consolidated organic sales were up 0.9%, driven by favorable volumes in Construction Products Group and Performance Coatings Group, as well as increased pricing in all segments. Revenue took a 0.4% hit from currency fluctuations. Adjusted EBIT margin improved by 170 basis points, lifted by MAP 2025 benefits and the commodity cycle, with stronger fixed cost leverage at Construction Products Group and Performance Coatings Group adding to that gain. Frank mentioned earlier that we're investing in efforts designed to accelerate organic growth, which contributed to the rise in SG&A this quarter. Additional drivers of the SG&A increase included incentives tied to selling higher-margin products, inflation, and wages and benefits. We continue to selectively increase prices at locations dealing with the most severe inflation, and near the end of fiscal 2023 we implemented cost-cutting measures to partially counterbalance the rise in SG&A. Adjusted EPS climbed 40.5% to $0.52, setting a third-quarter record, driven by growth in adjusted EBIT. A $629 million reduction in debt compared with the prior year, which record cash flow made possible, brought interest expense down for the quarter and contributed to the adjusted EPS improvement as well. Turning now to segment performance, starting with Construction Products Group on Slide 7. Sales in the third quarter reached a record, with concrete admixtures leading the growth, continuing to gain from reshoring and infrastructure work, including in Latin America. This division likewise expanded thanks to greater appetite for high-performance buildings along with share gains in the market. MAP 2025 advantages that produced a more favorable product mix, plus improved fixed cost leverage stemming from higher volumes, drove the adjusted EBIT improvement. Turning to Slide 8, the Performance Coatings Group reported all-time-high sales, once more powered by need for engineered solutions tied to reshoring projects — helped by favorable timing on certain project completions — together with market share gains. Recently realigned under the Performance Group, the businesses across Africa, the Middle East, and Asia Pacific — Performance Coatings Group management — contributed to this segment's growth, propelled by RPM's engineered solutions centered on infrastructure projects. Q3 set a record for adjusted EBIT, thanks to higher sales, a better mix, and greater leverage on fixed costs, which MAP 2025 further boosted. Turning to Slide 9, Specialty Products Group sales fell, mainly because the disaster restoration business faced a tough comparison with last year's period, when it gained from responding to freeze-related flooding — something unlikely to repeat to the same degree this year. Another factor in the sales drop was the divestiture of the noncore furniture warranty business. Following a number of weak quarters, specialty OEM markets started to show signs of stabilizing in the quarter. Lower adjusted EBIT came mostly from weaker sales and volume in disaster restoration, creating negative absorption, plus the sale of the noncore furniture warranty business. SPG kept funding long-term growth initiatives too, though cost cuts made late in fiscal 2023 helped offset some of that. On Slide 10, the Consumer Group ran into pressure as DIY customers took less product from retail stores, buyers held lean inventories, and we cut lower-margin items. Market share gains made up for part of the volume loss. Margin improvement came about thanks to MAP 2025 efforts and the trimming of lower-margin offerings, though this was partly counterbalanced by under-absorption tied to reduced volumes along with greater costs for wages and benefits. At this point, I'll hand things over to Matt, who will walk through the balance sheet and cash flows and give an update regarding emerging markets.

Matt Schlarb

executive
#4

Thanks, Mike. Turning now to Slide 11. During Q3, the favorable trend in working capital carried on, with inventories falling $261 million versus the same period a year ago. In the third quarter on a year-over-year basis, working capital as a share of sales came down 580 basis points, landing at 21.4%. That helped drive a quarterly record of $173 million in cash from operating activities. Across the trailing 12-month span, cash generated from operating activities reached $1.26 billion — a record figure and a $969 million improvement over the equivalent period a year earlier. Thanks to that robust cash generation, we lowered debt by $629 million relative to the prior year, and through dividends plus share repurchases we gave back $210 million in cash to shareholders over the first 9 months of this fiscal year. Now on Slide 12, I want to call attention to the investments we've been making in emerging markets. As discussed before, our businesses across Asia Pacific, Africa and the Middle East were recently brought together under a new management structure. That realignment has produced better coordination, and growth has picked up because we're now better placed to meet rising demand for our engineered solutions that serve infrastructure projects; this expansion has kept going, and we're putting money into new plants in Malaysia and India to boost capacity, cut shipping costs and strengthen how well we serve our customers. Consistent with our Building a Better World initiative, the building of these plants includes multiple sustainability elements, such as solar panels, rain water harvesting and a solvent recovery system; these plants also fold in MAP manufacturing improvement initiatives and will turn out products from multiple brands spanning RPM segments, which shows the greater collaboration among RPM businesses that MAP has made possible. The Malaysian facility is set to open during the first half of fiscal 2025, while the Indian plant should come online in the second half of fiscal year 2025; at this point I'd like to hand the call to Rusty for the outlook.

Russell Gordon

executive
#5

Appreciate that, Matt. Slide 13 contains our outlook for both the fourth quarter and the full year. Looking at the consolidated picture, we expect fourth quarter sales to come in roughly flat against a record figure from the same period a year ago. CPG should set the pace for growth, with sales climbing somewhere between low and mid-single digits, powered by demand for solutions that serve infrastructure and institutional projects along with its emphasis on restoration and maintenance. Following several consecutive years of record sales, PCG's fourth quarter sales should land approximately flat. The main reason is the timing of when projects wrap up, several of which shifted forward into the third quarter. On top of that, a business divestiture we previously announced will weigh on PCG's results. For SPG, we expect sales to fall within the mid-single-digit percentage range, since the disaster restoration business is still facing difficulties while specialty OEM markets are leveling off, though at low levels. Over in Consumer, continued weakness in DIY demand should more than cancel out the market share we've gained, so sales will drop in the mid-single-digit range. Even so, with those ongoing share gains, we feel we're positioned to see faster growth once existing home sales and DIY markets finally bounce back. At the consolidated level, fourth quarter adjusted EBIT should rise in the high single-digit percentage range against a record prior year period, with MAP 2025 benefits driving that improvement while lower volumes create under-absorption that partially offsets it. And last, you'll find our full year guidance at the bottom of Slide 13. We expect full fiscal year sales growth to come in near the midpoint of our earlier guidance of up low single digits, and adjusted EBIT growth to land near the midpoint of our earlier guidance of up low double digits to mid-teens; that wraps up our prepared comments. We're ready now to take your questions.

Lucas Beaumont

analyst
#6

This is Lucas Beaumont, filling in for Josh right now. I'd like to begin with Consumer, if that works. So I'm hoping to hear your perspective — your present take — on whether you believe the sell-in has now been reconnected with the takeaway at retail stores, since you previously pointed out that takeaway there was weak. And if we assume those things have come more into sync at this point, how do you see the outlook shaping up at the retail level across the coming couple of quarters? Also, at what point should we anticipate a return to volume growth?

Frank Sullivan

executive
#7

Certainly. So in Q4, we anticipate a continuation of what you saw in Q3 and throughout most of fiscal '24, with continued relative strength in Construction Products and Performance Coatings, plus certain difficulties in the Consumer segment and Specialty Products Group — especially as it relates to the Consumer segment, given an exceptionally strong fourth quarter last year. As we move into fiscal '25, my expectation is that we will begin to see Consumer takeaway improve and volume come back.

Lucas Beaumont

analyst
#8

Thank you. Turning to how strong things keep being over in the CPG business. You folks have essentially exceeded your volume targets across roughly 4 straight quarters, even though the wider macro signals have suggested a slowdown. 3Q came in closer to expectations. Could you share what you're thinking on that, and maybe break apart the gains you're getting from infrastructure picking back up versus the underlying growth? Also, ought we to expect those macro signals to reconnect at some point? Or what's your read on how this unfolds?

Frank Sullivan

executive
#9

Absolutely. Momentum, as we see it, keeps building for both Performance Coatings Group and Construction Products Group as we move into Q4 and into fiscal '25. Worth pointing out that Construction Products Group has delivered this even with considerable softness in the core noncommercial and core commercial construction products sector, which has definitely been on the weaker side. We captured that in infrastructure, plus many of the projects we mentioned. Then, looking ahead, our positioning is strong. Backlogs look healthy, and frankly, on a global basis — speaking in broad terms — we haven't gotten through even a sliver of the trillions of dollars in government stimulus, primarily in the United States, though also elsewhere around the world, and that's helping propel this; so be it onshoring and/or friendshoring across Europe and North America; we're positioned quite well to keep capturing more than our fair share of such projects, and we expect that to carry on through upcoming quarters.

Frank Mitsch

analyst
#10

Frank, I hope you're in a pleasant spot right now. I'd like to pick up where that previous remark left off. You mentioned the backlogs appear fairly solid. Did that apply specifically to Construction Products? Also, could you somehow gauge the magnitude compared with your typical position on the 4th of April?

Frank Sullivan

executive
#11

Certainly. I won't get into that with any particular precision. Still, within Construction Products, our backlogs are solid. Good momentum keeps showing up in our Performance Coatings Group. As we anticipated, the fourth quarter will be somewhat softer, in part due to projects wrapping up. The second half deserves attention, I believe. Counting the guidance we gave here, covering the whole of RPM for the second half of '24, combining the third quarter just reported with the full-year guidance we reaffirmed, you'd get consolidated sales growth of flat or plus 1% along with adjusted EBIT growth between 13% and 14%. I bring that up since certain projects sped up or finished late in Q3 that would otherwise have landed in Q4 within Construction Products and Performance Coatings. Even so, the backlog for each is truly robust. Q4 has gotten off to a strange start for us and for everyone, given how the holidays landed — March had 3 fewer shipping days, while April has 3 additional ones. That means monthly comparisons against earlier years are also unusual. Broadly speaking, though, both segments remain in excellent condition, and the forces behind record sales growth, gains in unit volume, and margin improvement appear to be persisting.

Frank Mitsch

analyst
#12

That's quite useful. Then, if I may ask a second question about the Consumer segment. As I recall, when we last talked, the relationship between pricing and raw materials was expected to become favorable in Consumer. Could you share your thoughts on where that stands now, and perhaps a broader remark about raws? My understanding was that the forecast called for raw material deflation to reach its low point during the back half of '24. Does that remain what you expect?

Frank Sullivan

executive
#13

Yes, that's still what we expect, and it matches what we're seeing. Actually, especially within our Consumer Group, we're beginning to observe certain raw materials ticking upward in a handful of specific areas — acetone has risen considerably. That one is somewhat of an exception. Propellants are up somewhat. Plastic cartridges have increased. So in a few categories that disproportionately affect our Consumer Group, we're witnessing a bit of a comeback in inflation or pricing. That said, on the whole, I'd say we've reached the stage where what we're seeing is a recovery in the commodity cycle. We'll experience a modest amount of that during Q4. After that, only time will reveal how things play out as we look ahead to our new fiscal year.

Mike Harrison

analyst
#14

I want to say congratulations, especially on how strong the cash flow was. Could you share a bit more about what is happening with margins in the Specialty segment? Revenue there came in fairly close to what we saw last quarter, yet adjusted EBITDA appears to have been near $5 million, which is a decline versus the prior quarter on a sequential basis. What is behind that? And if you can offer any guidance on how specialty margins ought to be viewed going forward?

Frank Sullivan

executive
#15

That question is going to go to Rusty Gordon, covering how the Specialty Products Group did in the quarter and year-to-date, and roughly where we expect things to head.

Russell Gordon

executive
#16

Yeah. Regarding how Specialty did in the quarter, Mike, there was honestly no disaster restoration work worth mentioning at all. Sales weren't really pushed by any weather events, so we ended up dealing with under-absorption. Year over year, we're still facing an unfavorable comparison, just like in the second quarter, plus we divested our furniture warranty business. And overall, OEM volumes appear soft, though not as bad as before. It's improving somewhat, so we have a bit of reason to hope that will get better.

Frank Sullivan

executive
#17

Also, Mike, I should mention that weather-related occurrences had a major effect during Q3 of the prior year. When we get to Q4, we aren't facing that same sort of comparative hurdle. Additionally, the Guardian warranty operation—which truly wasn't central to what we do, being an insurance-related business with no connection to products, and which carried very strong margins—was divested during the third quarter of last year. Consequently, once again, that unfavorable year-over-year comparison won't be present for us in the fourth quarter either. Therefore, as Mike Laroche pointed out, within our main OEM coatings segments, conditions are beginning to level off. Plus, we won't be up against those same difficult comparisons stemming from the Guardian sale or the major weather-related occurrences at Legend Brands that weighed on Q3.

Mike Harrison

analyst
#18

Okay. And next, I was curious whether you might give us a few preliminary thoughts, since we're beginning to shift our focus toward fiscal '25 and considering earnings growth. The consensus expectation is that EBITDA will rise by roughly a high single-digit figure relative to fiscal '24. For the time being, does that seem like a sensible place to start? And perhaps you could say a bit about a few of the positive and negative factors as we consider earnings growth for the coming year.

Frank Sullivan

executive
#19

Certainly. Beyond restating a few points we've already shared, which I'll get to shortly, we aren't in a position to offer guidance for fiscal '25 in any granular way; that will come when we announce fourth quarter results in July, and at that point we'll give further detail on how we expect fiscal '25 to develop. What we have said is this: we'll be lapping simpler year-over-year comparisons, as we just discussed regarding our Specialty Products Group. At some stage, once we move into fiscal '25, we should encounter both simpler comparisons and certain market share gains, along with some favorable unit volume growth returning to our Consumer segment; and we observe ongoing solid momentum in the economic, market, and infrastructure trends we've been describing for Construction Products and Performance Coatings. So our plan calls for our tenth straight quarter of record sales and earnings in Q4; and I believe we've got some favorable dynamics heading into fiscal '25, though we'll share additional specifics on a consolidated basis and broadly by segment when we announce Q4 in July.

John Roberts

analyst
#20

Frank, is RPM likely to have any appetite for PPG's North American architectural paint operation? Or do you have any perspective on that?

Frank Sullivan

executive
#21

Typically we stay quiet regarding what we're doing on the acquisition front until a deal is finished. Of course, dealmaking is on the rise, and it was made public that the — I think the figure is roughly $1.8 billion in revenue — PPG architectural, the North American Architectural Coatings business, is set to be sold, divested or realigned; so I suspect that, like anyone else with an interest in the paint and coatings sector, we have some appetite for certain pieces and parts, and we definitely plan to be involved in whatever process unfolds and to take a look at it; and that's about as specific as we would normally get, but it's fairly unusual for a divestiture process such as this to be announced publicly, and it has been. So we'll take a look at it.

John Roberts

analyst
#22

MAP 2025's last year kicks off in just a few weeks. Will there be a MAP 2028 program, in your view? Is that the proper rhythm to be considering? Or do you expect RPM to shift toward some other strategic approach once MAP 2025 wraps up?

Frank Sullivan

executive
#23

Appreciate that question. I'd say our attention is squarely on delivering the MAP 2025 targets. Looking at how we've performed across 9 months, I feel genuine pride in what RPM associates worldwide have accomplished. Our MAP '25 initiatives are clearly making a big difference. Working capital is getting better. Margins are getting better. We're concentrated on pushing a more favorable mix, and be it operating improvement efforts at our plants, or bringing some of those MS-168 disciplines into the commercial side, we're finding considerable success. Our cash flow shows this plainly, sitting at record levels that are meaningfully higher. So the elements within our control are performing quite well. Something we've discussed, and it stands to reason given where MAP '25 concentrates, is that once unit volume growth returns in Specialty Products and Consumer, those businesses will deliver even stronger results, similar to the really powerful leverage we saw in Q3 from Performance Coatings and Construction Products, since both enjoyed positive unit volume growth during the quarter and have had it all year long; so that has us pretty excited. A new program is coming, and we'll speak about it publicly either next spring or next summer, whatever name we give it. I can't say yet what that will be. But the MAP initiatives still have plenty of runway, especially on the commercial side and the data side. And a new program will arrive, with details coming, I'd say, about a year from now. Meanwhile, our focus stays on reaching the 42% gross margin goal and the 16% EBIT margin goal we established a few years back.

David Huang

analyst
#24

Let me start with your project-related operations in Construction and Performance Coatings. Could you describe what the competitive situation looks like there? From what I gather, many of your competitors have said they want to grow further in U.S. construction and manufacturing. So do you anticipate pricing pressure over the coming quarters, where these businesses might face unfavorable pricing?

Frank Sullivan

executive
#25

On the whole, holding our pricing has been something we've managed quite well. A handful of exceptions exist — for instance, certain silicone sealants that behave more like commodities, where the silicone chemicals underneath fell sharply after hitting their highs; that's one such category. We also had a couple of spots within our Consumer Group where we ran straight into price elasticity, and our price points on certain products matter for keeping Consumer takeaway growing; apart from commodity-type chemicals that spiked sharply 1 year or 1.5 years back and have since declined a lot, we aren't really seeing that. Outside of those pockets, meaningful price cuts aren't showing up. What I can share is that — and this is visible to you as well — inflation's level has come down sharply, raw materials are largely leveling off, and a number of commodity chemicals have fallen considerably; that's precisely where we too have lowered certain prices while keeping margins fairly healthy. As I noted, inflation persists in a handful of areas, tied to what we've said about our Consumer Group, and it keeps rising at a slower rate, yet still climbs for salaries, benefits, hourly wages, and things such as insurance.

David Huang

analyst
#26

Moving on, I suppose, to the topic of fixed cost absorption. From what I recall, during Q3 of last year, you faced a $20 million headwind. At the overall company level, I'm wondering, does another headwind exist for this quarter? And, I guess, if we assume you're nearly finished with getting inventory to the right size, and if we assume sales volume stays flat in the coming year, what sort of leverage, I guess, might you get from fixed costs in FY '25 compared with FY '24?

Frank Sullivan

executive
#27

Yes, I would want Rusty Gordon to respond regarding absorption and how it is affecting us at present, plus the inventory reduction programs that we've been pushing internally quite aggressively, how those are affecting results and what his thinking is on that. Rusty?

Russell Gordon

executive
#28

Right, absolutely. Once again, David, we've been hit by weak absorption, particularly within SPG and Consumer, where our volumes keep declining. Beyond that, as Matt pointed out, our working capital ratio came down 580 basis points compared to a year ago, largely driven by inventory, which is visible on the balance sheet; so that trend has persisted; and in our PCG and CPG numbers, where volumes are rising, you can genuinely observe the leverage we achieve. We continue to enjoy strong leverage in the Consumer segment thanks to considerable MAP activity there, and that's going to keep assisting RPM through this under-absorption problem, though it's especially severe at SPG and Consumer.

John McNulty

analyst
#29

I'd like to take a closer look at Consumer. It appears you're basically on track for a record margin this year in Consumer, even with demand being fairly difficult. So my question is, how should we view the levers still available to you regarding the MAP improvements and the efficiencies, as we think ahead across the coming 12 months? Or does the next increase in margin truly hinge entirely on volumes recovering and Consumer takeaway returning to something more normal? What's the right way to think about it?

Frank Sullivan

executive
#30

Sure. Let me offer a few comments, and Rusty may want to add some thoughts too. To begin with, I wouldn't say we're at record margins for our Consumer Group. Those came during the COVID period. And so — even before COVID, I'd say we still have distance to cover. Raw material inflation struck our Consumer Group the hardest, given some of the metal packaging and certain chemical raw materials they work with. That's been a difficulty. We're experiencing considerable leverage. Right now the price and commodity cycle helps us more than anything else, though we're beginning to see some raw material increases, such as acetone, which I brought up. So that one puzzles me. Still, the leverage and the gains we've delivered in our Consumer segment have been substantial. On our earlier call, I noted that through efficiency alone we've found tens of millions of unit and excess capacity; because of the major strides in Consumer, we're doing something fairly unusual. With the asset base we have, our historical practice was to build inventory in February and March for the spring and summer months; as a matter of fact, both last year and this year, we're internally continuing to cut inventory, since we've built a far more efficient operation capable of matching supply and demand. Our fill rates have climbed back into the high 90% range. So the progress we've made there is genuinely impressive and genuinely dramatic. And you certainly can't observe it while your unit volume is falling in the low single digits; so once we return to positive unit volume growth, I believe you'll see the payoff from the MAP initiatives, which matter just as much at Consumer as they do, say, at Construction Products or Performance Coatings; however, since so many of those benefits come from manufacturing efficiencies, they won't appear until you sell something.

Russell Gordon

executive
#31

Absolutely, Frank, that's correct. At Consumers, many of the MAP savings haven't been visible, and under-absorption has been quite significant because volumes have been falling. For this year, I could point to no less than 200 basis points each quarter stemming from the impact of under-absorption — driven not only by reduced sales volumes, but also by the deliberate push to bring inventory down.

Frank Sullivan

executive
#32

Even so, the fundamental gains in how we're operating—especially at our factories—are genuinely extraordinary. And once we're in a stronger unit volume setting, I believe that will become apparent.

John McNulty

analyst
#33

Understood. All right. Then I suppose the second item, which might be somewhat further down the road — you're putting some fairly solid investments into growing the Asian business, and you already have some new plants that are starting up. So how are you approaching the matter of capturing market share and building brand recognition in a region where your footprint isn't as large as it is, let's say, in the U.S., Europe, or even Latin America? How should we be framing that? And in what way are you evaluating the growth possibilities there?

Frank Sullivan

executive
#34

Certainly. I'll offer a few thoughts, and after that Matt Schlarb can chime in. Through our MAP '25 initiative, and actually reaching back to the initial MAP program, we came to see that our work, especially across the developing world, simply wasn't producing much in the way of results. We were running too many tiny operations and had made a handful of small acquisitions just to establish some initial presence. Yet since those operations were small and located far away, they received little of our focus. Consequently, we weren't gaining much momentum. We have an outstanding management team based in South Africa that, given the distinctive character of that market, turned both South Africa and Africa into a platform for a number of RPM products. Their achievements prompted us, as part of the MAP initiatives, to place the Middle East, India, and Southeast Asia — drawn from the Asian markets — under that leadership group, and to genuinely adopt an RPM platform strategy for the developing world. As you're able to see on Slide 5, in the PowerPoint slides we partnered on for our prepared remarks, sales growth was really strong. And as you might expect, earnings growth across these geographies was just as striking. All of that stems from a restructuring and a fresh way of thinking about how we might better pursue growth in these developing regions of the world. Finally, I'd say that with an approach that appears to be delivering results, the fact that we remain comparatively small convinces me there's an enormous amount of opportunity for further growth. Matt, is there anything you'd like to add?

Matt Schlarb

executive
#35

Let me just tack on a point regarding John's brand question. So when it comes to PCG and CPG, our brands enjoy global recognition, especially among multinationals putting money into Southeast Asia and India. That said, there is definitely space for those brands to expand. So launching those facilities in that region simply makes us more agile in serving our customers, and it additionally reduces shipping expenses and delivers the items they require, since we observe that spending in that region—especially infrastructure and manufacturing CapEx—keeps going.

Frank Sullivan

executive
#36

Right, so they're going to deliver reduced costs along with better service quality compared with what we've generally managed to achieve using a manufacturing footprint that's largely based in North America or Europe.

Mike Sison

analyst
#37

Great quarter. Frank, from what I can tell, you've taken every step that's in your own hands to reach that roughly 42% gross margin target and the 16% EBIT margin target. What amount of volume do you figure is required to essentially arrive at that point? And perhaps just share any perspective on the kind of rebound that's needed in existing home sales and in DIY, to essentially move you toward getting nearer to those targets?

Frank Sullivan

executive
#38

Absolutely. As we head into fiscal '25, I'll offer a couple of points on that. First, within our Specialty Products group, we anticipate a rebound, and one will be necessary. Even after adjusting out the Guardian warranty business, this group was a mid- to upper single digit — pardon me, mid- to upper double digits; meaning a mid-teens to upper teens EBIT margin business; and over time I'd anticipate us returning to that level, and that rebound has to occur in fiscal '25. At some point in fiscal '25, we will see Consumer takeaway turn positive again. When exactly is not something I think we have a solid grasp on, and I believe we'll give a clearer picture of that when we discuss '25 in July. Finally, as people have pointed out, we've been putting substantial investments into SG&A, for example, around building out this RPM platform strategy for the developed world, which are — developing world, which is delivering returns, plus some of our MS-168 and CS-168. With CS-168, smart pricing initiatives. We've brought in personnel across various categories. In fiscal '25, I believe you'll observe a highly intentional effort to balance SG&A spending and shift SG&A toward areas that are genuinely growing while dealing with some SG&A spending that's been quite intentional across the last 2 or 3 years. But wherever there are areas that aren't delivering returns, we will address that. So those are the factors I foresee, and that we'll require for our MAP '25 goals.

Mike Sison

analyst
#39

Understood. Just one more quick question. Regarding the Consumer Group, you brought up gains in market share. Are there specific segments or types of customers? And then, if a robust recovery doesn't happen in '25, given those market share gains, would you still be able to turn the corner when it comes to volume growth for the Consumer Group?

Frank Sullivan

executive
#40

Matt, would you like to discuss some of the market share gains and new product introductions we've had?

Matt Schlarb

executive
#41

Absolutely, absolutely. Glad to do it. So, as Frank has already brought up during this call, DAP rolled out a brand-new single-component spray foam for walls and cavities. We've picked up share, and honestly it's been fairly wide-ranging. We've gained share at a number of automotive retailers. We've also had some wins with specialty retailers. And if you look at product categories, you might recall that we bought Ali Industries — the maker of Gator sand paper — a few years back, and over the last several quarters they've posted some solid gains at home improvement retailers too. So when it comes to market share gains, the strength is pretty wide-ranging. But really, this is a trend we've been watching ever since we worked through the supply chain issues a number of quarters ago.

Aleksey Yefremov

analyst
#42

Frank, let me circle back to Consumer for a moment. How should we frame the possibility of a volume rebound or a snapback? Volumes are currently off by a low single digit percentage, so do we simply recover that amount, and then perhaps the market expands at a low single digit rate whenever that happens, or are we talking about something larger?

Frank Sullivan

executive
#43

No, I'd describe it as a gradual normalization of Consumer takeaway, plus volume coming from certain new product launches that Matt mentioned earlier. A dramatic snapback isn't something we anticipate as such, though our comparisons will get simpler as we move into fiscal '25, which is when Consumer takeaway truly began to show up. Part of this, I believe, is a long-tail rebalancing after the COVID surge. Another part, I think, is simply the reality in manufacturing — and as we've noted in prior quarters, although at a broad level we may be sidestepping a significant recession, the manufacturing sector has experienced a rolling recession. Every category tied to housing has experienced a rolling recession, and categories propelled by housing turnover have experienced a rolling recession. We observe that within our core Specialty Products Group, which manufactures wood, paints, finishes, and items used in kitchen cabinets, doors, windows, RVs, and all sorts of housing-connected products. You can observe the same pattern at other businesses making goods in that space. Housing turnover is beginning to improve, which benefits both our Specialty Products Group and our Consumer Group, since housing turnover tends to propel a portion of our Consumer takeaway. As someone pointed out only a few months ago, at a broad level the United States sits at a 30-year low for housing turnover. So that has been a difficult dynamic. My sense is all of these factors are trending favorably, and then you'll begin to watch what has been, consistently throughout the last fiscal year, negative Consumer takeaway in the low to mid-single digits gradually shift to a positive figure for unit volume — one in the low single digits. It would be great if it were larger, but no major boom is on our radar in the form of any enormous snapback in volume.

Aleksey Yefremov

analyst
#44

Then looking at all your product categories, not only Consumer, but with customers such as Nudura, there's likely greater confidence regarding new residential construction, not right away, but afterward in this year or perhaps even the next calendar year; so in those segments, are you noticing increased confidence when it comes to your product pull-through, backlogs, or similar items?

Frank Sullivan

executive
#45

Certainly. Our Construction Products Group is doing very well. Nudura in particular felt the downturn in residential new construction and the adverse effect of interest rates on both construction and housing turnover; thus that product line suffered during last year. We are observing growth in those products, the Nudura products and projects; when we bought it 5 years ago, it was mainly a residential product. Our Tremco Construction Products Group is now effectively aiming Nudura at the extensive North American school market, and we are achieving some wins there. So we are taking what was chiefly a residential new construction product line and extending it into some additional commercial markets that excite us. Tremco is also fairly distinctive with Nudura and Dryvit; and the Tremco Sealants and assembling what they refer to as a One Tremco package, in which they collaborate with architects and engineers to actually specify a whole wall system. And so rather than having separate components from separate manufacturers that carry separate warranties or no warranties whatsoever, we can assemble a full wall system and guarantee the whole wall performance instead of individual components. So those are all dynamics we have been focused on, and they are generating solid progress and momentum; and I believe that with a comeback of residential new construction, a comeback of commercial construction, which has likewise been down quite substantially over the last 12 to 15 months, you will witness even stronger momentum in our Construction Products Group.

Jeff Zekauskas

analyst
#46

Home Depot has been acquiring SRS, which is involved in building products, and they own Specialty and Roofing. Does that help RPM, hurt it, or truly not make a difference?

Frank Sullivan

executive
#47

At this point, I don't believe it makes a difference; we definitely enjoy a solid relationship with Home Depot, and they're our biggest customer; so should chances arise for us to look into what that could mean, we would be enthusiastic; yet, as I noted regarding the earlier question, the majority of our offerings get specified into schools, universities, and hospitals. Thus they are extremely specialized, especially, as you're aware, in our stone hard flooring, but here, Tremco Roofing. A great deal of our own application work is done by us, whether directly or in the role of general manager — general contractor on a significant project. Consequently, not many of our products within the Roofing segment move through distribution. That isn't to say there won't be a future chance we could investigate to broaden certain product lines more widely into distribution; however right now, there isn't a genuine — it's neither positive nor negative, given how we approach the market compared with those whose more commodity-style products reach the market via distribution at present.

Jeff Zekauskas

analyst
#48

When you answered a question earlier, you mentioned that certain portions of the PPG business could be of interest to RPM. So does that imply RPM isn't interested in the entire business?

Frank Sullivan

executive
#49

Once again, this is a strange situation — normally we wouldn't say anything about M&A activity, but this one is squarely in our area and it's a very public announcement; as we understand it, detailed information is expected in a matter of some weeks or months, whenever that happens. We genuinely want to examine the whole of whatever is up for sale. That said, there are definitely brands and certain pieces and parts that would truly interest us and that we could integrate; however, Jeff, I'm unable to give you an answer with any specifics, since we haven't yet laid eyes on any details.

Steve Byrne

analyst
#50

In the quarter, your cost of goods seemed to be lower by 6% or 7% in absolute dollar terms versus the prior year. Could you rank what drove that decrease among reduced volumes in Consumer Specialty, cheaper raw materials, and the third category, MAP 2025? How would you split up the factors behind the reduced COGS?

Frank Sullivan

executive
#51

Absolutely. I'll also let Rusty add some detail on that. I'd say, generally, it comes from a mix of cost, price, and our MAP efforts. Part of it reflects our quite intentional push and incentives for sales teams to move toward a richer margin mix, especially in CPG and PCG. It's the gains from our MAP initiatives on greater unit volume. Beyond that, I'm not sure if, Rusty, you have anything more you'd like to contribute.

Russell Gordon

executive
#52

That's right, that's exactly how I'd characterize it. It comes from a mix of price hikes on the selling side, which weren't huge but still helped in every segment. On top of that, we saw deflation, and MAP savings are also a big part of it. This year we'll pick up roughly $100 million in incremental savings, though it shifts quarter to quarter. The third quarter of this year is clearly a seasonal trough for us, but even so, that was quite significant as well.

Frank Sullivan

executive
#53

Right. And like Rusty said before, a significant chunk — tens of millions of dollars in MAP savings — has been offset or hidden by that under-absorption, especially within Consumer at several of our Specialty Products Group businesses.

Steve Byrne

analyst
#54

Now Frank, I'd like to ask you something about structure. Looking at Consumer — sorry, Construction Products and Performance Coatings — those two segments share an awful lot when it comes to the products and the end markets they serve, and the new plants you're putting up in Malaysia and India will serve both. Some of your businesses have moved from one segment to the other. So here's my broad question: by merging those segments, could you generate additional cost synergies and perhaps more cross-selling?

Frank Sullivan

executive
#55

Absolutely. Thanks for asking. To start with, we've always taken a very deliberate, long-term strategic view across our history. RPM has shown a willingness to reshape itself. Looking at our history over the past 24 years, RPM started out basically functioning as a genuine holding company made up of 40 or 50 separate business units, and then we moved to a structure built around 6 groups. That model worked effectively for RPM, for our customers, and for our shareholders for about 15 years. Then, in 2018, when we introduced the MAP 2020 program, we restructured into 4 groups. That restructuring has truly delivered significant synergy and collaboration across our businesses — even extending across all 4 groups and the different business units within them — to a larger extent than we experienced with the 6-group setup. So my view is that we remain firmly dedicated to the current 4-group structure, at least all the way through the MAP 2025 period. And as I said in response to an earlier question, I expect we'll take a look this time next year, thinking long term, about what the next initiative for RPM should be; and whether that's a year from now or 10 years from now, the notion that we'd examine our structure and do something different, it made sense; it's definitely something we've demonstrated before that we're willing to do, and we certainly would do in the future when it's appropriate. Looking at Construction Products Group and Performance Coatings Group, the end-use markets differ quite a bit. Performance Coatings Group leans toward heavy industry and infrastructure, whereas Construction Products Group is more tied to construction markets, new home construction, and commercial construction. Right now, infrastructure is basically where they overlap. We definitely cooperate well, and that's gotten a boost from over $1 trillion in federal stimulus that's only starting to take effect, so we expect that to keep going. Still, as things stand, we have no plans to alter that structure if it made sense. We've followed that approach before, and we'd take the same path going forward. One additional point I'd make: provided those two businesses—each with strong leaders and strong leadership—keep delivering positive unit volume growth even with somewhat uneven economic conditions, while also expanding margins and producing healthy EBIT increases both year over year and quarter over quarter, we'd think twice before changing something that is performing so well. Both also have solid momentum behind them.

Kevin McCarthy

analyst
#56

Frank, I'd like to ask you about cash flow, and more specifically about working capital. A few quarters back, as I recall, you indicated there was room to bring down the trade working capital-to-sales ratio by roughly 300 basis points. And looking at this morning's numbers, it seems you're already at a 580 basis point reduction. That's genuinely impressive improvement. So my question is this: over the coming 6 to 12 months, is there more cash to be freed up from working capital? Or are inventory and the other line items pretty much right where they should be at this stage?

Frank Sullivan

executive
#57

Yes. I'll ask Rusty to share a few thoughts on that too. But our MAP efforts, especially those tied to MS-168, are ongoing. It's a continuous improvement process with no finish line. And I believe — I hope people recognize — that one of the biggest advantages of our MAP work, beyond the measures we've bettered in the cash flow figures and the margins, is the shift in culture at RPM; and that really shows up in 2 ways. First, there's a degree of collaboration and dialogue among our groups and businesses that simply wasn't there previously; and second, there's a lean manufacturing, continuous improvement mentality that, as I said before, may not be novel to the world at large, but it is novel to RPM, and it's truly gaining traction, and that cultural shift has delivered enormous returns for us. On the specifics of cash flow and working capital measures, I'll hand it to Rusty for his perspective.

Russell Gordon

executive
#58

Yeah. I'd say on the inventory front, that was obviously the area where we had the most room to improve when we stack RPM up against peers. And Kevin, I'd put it this way: we do well in a few of our businesses, but I'd still say there's ample room to get better in sales and operational planning at over half of them, so that we build only what our customers require and not a whole lot extra.

Kevin McCarthy

analyst
#59

Then, for my second point, I'd like to revisit Specialty Products. Looking at things broadly, would you say the margin figures from this fiscal third quarter that you've just reported will probably represent a lasting bottom? And tied to that, the fourth quarter sales outlook for Specialty Products caught me somewhat off guard, simply because your comparison against last year's fourth quarter is so much simpler. I did hear what you said regarding the absence of Disaster Restoration business. Are there other factors at play, maybe sequentially, that would make your sales trend down by mid-single digits as the fiscal year wraps up?

Frank Sullivan

executive
#60

Roughly fifty percent of our Specialty Products Group consists of our OEM Coatings and the Industrial Coatings OEM portion of our operations, which is strongly connected — though indirectly — to new home disruption, plus a meaningful portion sits in RV — the RV market, which surged throughout COVID. As a result, that area has been extremely weak. Those forces are likewise affecting our Specialty Products Group. My view is that Q3 marks the bottom in terms of results for our Specialty Products Group, and you should expect to see improvement on a sequential basis, as we move through Q4 and then into fiscal '25.

Ghansham Panjabi

analyst
#61

Frank, when we look ahead to fiscal '24, clearly Construction and Performance both posted exceptional volume results, at least through this point. Beyond that, price cost clearly served as a major factor behind margin improvement. Given what you said about certain commodity input costs appearing to have turned a corner, particularly within Consumer, and with oil having climbed somewhat as well, is it reasonable to believe that margin gains in '25 will come primarily from productivity, improved fixed cost absorption, operating leverage, and something of a bounce back in Consumer? Also, how should we frame construction and performance for fiscal year '25 when it comes to tough year-over-year comparisons and similar considerations?

Frank Sullivan

executive
#62

Sure. I suppose I'll circle back to a few things I mentioned earlier, and the assumption you're making is right. First, we anticipate margin expansion; second, it will come more from unit volume growth flowing through to our bottom line along with the MAP efficiencies we've realized across the last 3 or 4 years, and definitely across the last 1.5 years; so margin expansion is in our view, though it must be powered by growth in positive unit volumes. And we're fairly confident that will show up in Consumer during fiscal '25. I believe we'll have a clearer picture of the timing when we share our fourth quarter results and speak in greater depth regarding '25. Solid momentum exists in Construction Products, solid momentum exists in our Performance Coatings Group, and we don't anticipate that shifting, plus a rebound in Specialty Products. Those are the elements that will get it done. Still, the assumption behind your question is entirely right. Margin expansion will be fueled more by what our MAP initiatives deliver at higher volume levels than by any cost price mix effect; and as we pointed out, even during this quarter, I believe we're at the third quarter, roughly the high point of gains from the commodity cycle, while price on a year-over-year basis across the consolidated company is up 1%, which is clearly lower sequentially compared with the prior 4, 5 quarters. So the strong work we've completed, leveraged against greater unit volumes, is what will drive it.

Ghansham Panjabi

analyst
#63

Then, turning to my second question — regarding emerging markets, which performed quite well the whole time — what would you say is driving that? I realize that in certain instances the comparisons are somewhat simpler, but is what we're seeing purely an underlying enhancement? You also brought up certain adjustments you've implemented regarding the way those markets are handled within the company.

Frank Sullivan

executive
#64

Good leadership is essential no matter where you are, and at present we have excellent leaders across our developing areas, including South Africa, the Middle East, and Asia Pacific. It has taken quite some time for us to truly zero in on an approach that can be scaled and maintained, and now we have one. That makes us quite enthusiastic. For more than ten years, our method of buying companies simply wasn't succeeding — picking up smaller firms while failing to provide them with adequate resources or sufficient attention; therefore, the results you're witnessing are mostly from internal growth. It comes down to improved structure, improved leadership, and improved concentration. As you can tell from our very first significant greenfield manufacturing investments in these areas, this will remain organic, and those facilities will reach capacity quite fast. That approach will therefore keep going over the coming two years. Once we start achieving critical mass, we'll return to a position where we can purchase a company, yet integrate it and incorporate it into this approach, rather than owning some small operation located far off that receives little attention. So this is a space that makes us quite enthusiastic. It also represented a crucial component of our MAP initiatives concerning how we'd be arranged in order to succeed.

Arun Viswanathan

analyst
#65

Nice work on the momentum here. When we turn to fiscal '24, it seems like Construction Products Group and Performance Coatings accounted for a big chunk of the improvement in the year, while Consumer was sort of canceling out Specialty. Then, thinking about fiscal '25, I'd like to hear how you expect those segments to shake out. It does look like momentum might be easing somewhat in Construction Products and Performance Coatings, or at minimum they're catching up, though Consumer could come back and perhaps Specialty too, which would balance that out. Is that the way you see it? And if so, is it mostly MAP gains that are behind those shifts? Or what's your view on how earnings growth takes shape over the coming couple of quarters?

Frank Sullivan

executive
#66

Sure. Our Q4 guidance for Construction Products and Performance Coatings has a lot to do with when certain large projects wrap up, and we'll share those specifics in July. Still, looking at the back half of fiscal '24 across the whole company — I said this before — you'll see total sales flat to up 1%, with EBIT rising, say, 13% to 14%. That reflects the numbers we released today plus the outlook we gave for this fiscal fourth quarter of '24. If we revisit the latter half of the year for the Performance Coatings Group and Construction Products Group, what you'll find is genuinely strong unit volume expansion and solid results. Those are somewhat obscured by project completions late in Q3, which will hold back our growth somewhat in Q4. We aren't seeing any deceleration in the healthy performance and momentum of those 2 segments as summer arrives. And as I noted before, I believe our Specialty Products Group has reached its low point. We'll begin against simpler comparisons, combined with a strong push in our Consumer Group behind new product launches and operating efficiencies, which will let us support customers at a very high level. So going into fiscal '25, I think the trends look favorable, though the effect will come more from MAP initiatives, since the deflation and pricing factors will wrap up once we're past the fourth quarter and into the summer months.

Arun Viswanathan

analyst
#67

Excellent, that's useful. And so, yes, if I might pose one more question, I suppose, regarding how capital gets allocated. You folks have accomplished a terrific job lowering your leverage, and clearly that has benefited the equity side. Right now, and previously, you've frequently tended to prefer smaller bolt-on transactions. So, given the shifts in the organization and the capacity to integrate perhaps some bigger properties, is there a chance at this point to go after something larger? And if that's the case, would you be willing to assume some additional leverage in order to do so?

Frank Sullivan

executive
#68

Certainly. Yes, I'm grateful for that question. We're going to keep going and in fact possess a reasonably solid pipeline of acquisitions in the small- to medium-sized range that we will integrate and add to the strategies of our various companies and segments; thus I would anticipate that continuing. Especially within our Consumer Group and our Construction Products Group, where we are more integrated than other portions of RPM, I believe we're positioned to undertake larger acquisitions and truly generate the synergies that are necessary to be competitive from a price standpoint in those. And across my 30-plus career at RPM, we have been quite comfortable with utilizing our balance sheet. And so I think we have a tremendous amount of leverage. Our cash flow is stronger than it has ever been, and we'd be prepared to use our balance sheet all the way up to preserving our investment-grade rating; and so there's ample space between cash flow and debt capacity to complete larger transactions if we can locate them at a price that suits us.

Steven Haynes

analyst
#69

Steven Haynes here, sitting in for Vincent. I'd like to revisit something you said regarding SG&A. In your MAP targets, if I understand correctly, you're aiming at 26% of sales for SG&A. And at present, once you strip out every one-time cost, my sense is you're operating around 200 basis points above that level. Gross margin is coming in stronger too; still, speaking within the wider context of the MAP program, is 26% still the proper lens for viewing your SG&A spend?

Frank Sullivan

executive
#70

Yes, it is.

Frank Sullivan

executive
#71

I appreciate that, Jamie, and I want to thank everyone for joining us on today's investor call. Across the first 9 months of this year, we showed that we can widen margins and grow cash flow even with certain economic difficulties, especially within our Consumer and Specialty Products Group. We're eager to build on the momentum in those 2 segments while carrying forward the positive momentum in our Construction Products Group and Performance Coatings Group as we move into our fourth quarter during the summer months of our new fiscal year. When July arrives, we will share the specifics of our FY 2024 fourth quarter, which we anticipate will mark our tenth consecutive quarter of record sales and earnings performance, and we will offer any remarks regarding our outlook for fiscal 2025. Once more, thank you for being part of our call, and enjoy the rest of your day.

Operator

operator
#72

Everyone, that brings today’s conference call to a close. We appreciate your participation. You’re welcome to disconnect your lines at this time.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete RPM International Inc. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.

Get the API View API docs →

This call discussed

For developers and AI pipelines

Programmatic access to RPM International Inc. earnings transcripts and 132,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in RPM International Inc. or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.