RPM International Inc. (RPM) Earnings Call Transcript & Summary
July 25, 2024
Earnings Call Speaker Segments
Matt Schlarb
executiveThanks, Andrea, and welcome everyone to RPM International's call covering the fiscal 2024 fourth quarter along with the full year. This session is being recorded. With us on the line today are Frank Sullivan, RPM's Chair and CEO; Rusty Gordon, Vice President and Chief Financial Officer; and Mike Laroche, Vice President, Controller and Chief Accounting Officer. You can also hear this call via webcast, either live or as a replay, on the RPM website at www.rpminc.com. Statements we make today might contain forward-looking statements grounded in current expectations that carry risks and uncertainties, and those could lead to actual results differing materially. To learn more about such risks and uncertainties, please look at RPM's reports filed with the SEC. On this conference call, we might refer to non-GAAP financial measures. To help you understand these non-GAAP terms, RPM has posted reconciliations to the most directly comparable GAAP financial measures on the RPM website. Also, please be aware that our comments will be on an as-adjusted basis, and unless otherwise indicated, all comparisons are to the fourth quarter of fiscal 2023. We've supplied a supplemental slide presentation to go along with our comments today. You can find it in the Presentations and Webcasts section of the RPM website at www.rpminc.com. As a reminder, certain businesses in Asia Pacific that were previously part of the Construction Products Group are now being managed and reported under the Performance Coatings Group effective June 1, 2023. Consequently, all references to CPG and PCG today reflect the updated structure. This change has no impact on consolidated results. At this time, I would like to turn the call over to Frank.
Frank Sullivan
executiveThank you, Matt, and good morning. To kick off this conference call, I'll give you a high-level look at what we achieved, and then Mike Laroche will walk through more specifics regarding our fourth quarter and full year financials; after that, Matt Schlarb will share an update on the balance sheet and talk about the ways innovation is driving our growth; following him, Rusty Gordon will address our outlook. After that, we'll be happy to take your questions. Starting on Slide 3, I'll discuss our fourth quarter results. On the whole, we're happy with the way RPM's associates performed. Even though several of our businesses faced difficult end markets, we took advantage of MAP 2025 improvements to deliver our tenth quarter in a row of record adjusted EBIT. Looking at the full year, sales reached a record, and adjusted EBIT rose roughly 12% to a record, landing inside the guidance we gave a year ago. That figure included about $160 million of MAP 2025 benefits on a run rate basis, or approximately $100 million flowing through the P&L in fiscal '24, though some of that is currently being hidden by lower fixed cost utilization stemming from reduced volumes. Beyond margin expansion, MAP 2025 was essential to our capacity to structurally enhance working capital across the whole year; this produced record cash flow from operating activities of $1.12 billion in fiscal '24, which is an improvement of more than $545 million versus fiscal 2023 and $356 million, or 46%, above our prior annual record for cash flow. We directed part of that cash toward lowering debt by about $557 million over the year, and the lower interest expense that followed allowed us to increase adjusted EPS by 14.7% to a fourth quarter record and by 14.9% for the full year to a record $4.94 per share. Now on Slide 4, our Construction Products Group drove growth in the quarter, with broad-based strength across most of their businesses, and roofing, along with its differentiated turnkey offerings, showed especially strong performance. Consumer also did well in the quarter, delivering market share gains, an upgraded product mix and MAP '25 benefits to produce record adjusted EBIT even though sales fell because of continued DIY softness. After several years of record results, our Performance Coatings Group saw a decline in the fourth quarter, confronting tough comparisons to the prior year and negative headwinds from the timing of project completions, which we flagged on our previous earnings call. Within the Specialty Products Group, certain end markets displayed signs of bottoming out, but this segment remains challenging for us. The economic environment is still quite difficult. Even so, we managed what is within our control effectively, concentrating on MAP '25 and margin improvements to deliver record adjusted EBIT and record cash flow levels. Moving to geographies on Slide 5, north America, Africa and the Middle East all grew. And although sales fell in other regions, we continue to execute well in those areas. In Europe, sales fell 4%, hit by currency pressures and divestitures within the Performance Coatings Group. Even so, profitability there improved substantially, since targeted MAP '25 initiatives in the region built momentum, among them efforts aimed at driving a favorable product mix. In Latin America, leaving aside FX effects, sales rose at a mid-single-digit pace, with product-serving infrastructure projects continuing to deliver gains for us. Under our new management structure, Asia Pacific is doing well. Fourth quarter sales, though, were lower because of tough comparisons, given that a large project wrapped up in the same period a year earlier. Summing up how we performed: despite a number of challenges in end markets and the economy, we achieved solid gross margin gains thanks to our MAP '25 initiatives. Beyond the gross profit advantages, MAP '25 lets us harness RPM's power more effectively, producing an SG&A structure that is both leaner and more efficient. During the fourth quarter, we launched multiple SG&A reduction efforts, and these will pay off as we progress through fiscal 2025. With economic headwinds still around, we should keep in mind that the gains we're delivering are structural in nature. They assist us in managing near-term difficulties, yet their upside will become far clearer once end markets at last rebound and we start producing stronger organic growth. At this point, I'd like to hand the call to Mike Laroche, who will walk through our financial results in greater detail.
Mike Laroche
executiveThanks, Frank. Now if we turn to Slide 6, you'll see that organic sales on a consolidated basis rose 0.4%, with pricing up just a bit while total volumes came in flat. Currency movements created a 0.7% drag on revenue, and divestitures net of acquisitions took 0.1% off sales, so the quarter ended with a slight sales decrease. EBIT margins widened by 90 basis points, and that came from MAP 2025 gains, better fixed cost leverage within the Construction Products Group, and a favorable mix in the Consumer Group. SG&A rose this quarter, pushed by incentives aimed at selling higher-margin products, investments for long-term growth, and compensation and benefits. As Frank noted, during the fourth quarter we rolled out MAP 2025's enabled initiatives to streamline our SG&A structure, and the advantages from those will show up in fiscal year 2025. Adjusted EPS climbed 14.7% to $1.56, a record figure, powered by adjusted EBIT growth and reduced interest expense since robust cash flow let us pay down debt over the quarter. Now let's look at the Construction Products Group results on Slide 7. This segment saw broad-based strength, with roofing and wall systems doing especially well. Growth arrived from both new building construction and renovation, and we picked up market share in construction chemicals. They also achieved growth in products serving infrastructure projects, such as those that lower both the cost and carbon footprint of their construction. Some of these include driving gains, which cut the energy required to produce cement, and synthetic fibers that act as a substitute for steel rebar, generating significantly lower CO2 emissions and needing less labor to install. The increase in adjusted EBIT was led by better fixed cost leverage from volume growth, MAP 2025 benefits, and a favorable product mix. On Slide 8, Performance Coatings Group sales fell as they confronted difficult comparisons to the prior year period, when sales grew 10.8%, along with unfavorable timing of project completions as some were pulled forward into the third quarter while other projects are facing delays. On top of that, Europe had pockets of weakness. FX and the earlier divestiture of the noncore European service business also weighed on sales. Adjusted EBIT declined because of lower sales and reduced fixed cost leverage from volume declines. MAP 2025 benefits partially offset this. Turning to Slide 9, Specialty Products Group sales dropped mainly due to challenging comparisons to the prior year period for the disaster restoration business. In the prior year, customers were rebuilding inventories that had been depleted from increased storm activity and bursting pipes caused by freezing weather in earlier quarters. Overall, specialty OEM markets, especially those tied to residential, stayed soft. The decrease in adjusted EBIT came from sales and volume declines, which led to unfavorable fixed cost absorption. On Slide 10, the Consumer Group gained share with help from new products and grew in markets outside the U.S., which helped offset continued softness in the DIY space. Rationalizing lower-margin products also contributed to the sales declines. Through our MAP 2025 efforts and a better mix, we achieved record EBIT, though that was partly counterbalanced by under absorption tied to reduced volumes, along with greater costs stemming from wages and benefits. At this point I'll hand things over to Matt, who will discuss the balance sheet and cash flow, and give us the latest on innovation.
Matt Schlarb
executiveThanks, Mike. Now on Slide 11, cash generated by our operations came to $1.12 billion for the year — that's up $545 million versus the previous year and $356 million above the record we set before. Across the last 2 years, operating cash flow is up $944 million. The gain came from MAP 2025 efforts that lifted profitability and working capital. In Q4, working capital measured as a share of sales dropped 350 basis points year over year, landing at 23.5%. A large chunk of that cash went toward paying down debt, which was reduced by $557 million over the year; the result is less interest expense and more room to put money into organic growth and M&A down the road. In fiscal 2024, we gave back $287 million to shareholders via dividends and buybacks, and both of those went up over the year. Heading into fiscal year 2025, the quarter stayed solid at $1.36 billion; on the slide that follows, I want to walk through one example of how innovation is helping us expand a business we bought a few years back. Back in September 2020, we picked up Ali Industries, a top maker of sand paper and other abrasives sold under the Gator brand. As with a lot of these companies, they ran into supply chain problems across the past several years; now that those issues are behind them, they're playing offense again, launching new products and taking share. One we want to call out today is their new Reptilion line. These products bring a proprietary coating design that assists in channeling dust away as you sand, stopping buildup and boosting efficiency for whoever's using it. Reptilion also outlasts traditional power tool sanding accessories by 4x. Reptilion items are available on shelves right now and continue Gator's tradition of delivering high-performance abrasives to pro and DIY customers alike. At this point, I'll hand things over to Rusty for our outlook.
Russell Gordon
executiveAppreciate that, Matt. Turning to Slide 13, you'll find our outlook for the first quarter. Looking at the business as a whole, we anticipate sales will come in roughly even with a record set during the same period a year ago, and we see a lot of the market dynamics from Q4 persisting. Breaking it down by segment: within CPG, we're looking at revenue growth in the low single digits, building on the close to 11% increase posted in Q1 of 2024, with gains coming from their emphasis on restoration, selling, building envelope systems, and distinctive turnkey solutions. Over in PCG, we foresee sales holding steady because the comparisons remain tough — several bigger projects wrapped up during last year's comparable period, and others are slipping past Q1 of 2025. For SPG, demand overall should stay weak. That said, this segment faces easier year-over-year comparisons, so sales ought to fall within the low single-digit range. Within Consumer Group, we anticipate a low single-digit decline in sales. The patterns we saw in Q4 should largely carry over, with share gains and overseas market strength getting offset by ongoing weakness in DIY. At the consolidated level, Q1 adjusted EBIT should rise in the mid-single-digit percentage range against a record comparable period, powered by MAP 2025 savings. As part of MAP 2025, we're currently consolidating — or have just finished consolidating — 12 facilities, showing the ongoing progress we're making on efficiency. Guidance for the full fiscal year 2025 appears on the next slide, Slide #14; we're projecting low single-digit sales growth, with adjusted EBIT climbing somewhere between mid-single digits and low double digits. On the top line, volume growth remains hard to predict given limited clarity on the global economic picture, including the uncertain effects of elections here in the U.S. and abroad. Our strategic balance and emphasis on repair and maintenance ought to serve us well as we work through this mixed economy; we're expecting pricing to be modestly positive in response to ongoing inflation in categories such as labor and benefits, plus we anticipate moderate raw material cost increases during the back half of the fiscal year. Segment by segment: CPG should outperform its markets thanks to differentiated products and services, and ought to keep gaining from infrastructure and restoration spending. Following a year of robust growth, CPG will confront tougher year-over-year comparisons in fiscal 2025, and commercial construction is still sluggish. Switching to PCG, they keep benefiting from higher infrastructure project spending along with their more collaborative approach in emerging markets, which is driving profitable growth. After several years of robust growth, spending on reshoring projects looks like it's leveling off; PCG will also face a temporary headwind tied to under absorption from new plant openings in India and Malaysia that we discussed on the previous call — last quarter — though those plants should become a longer-term tailwind for PCG's results. Right now at SPG, our expectation is that a number of important end markets are going to stay weak. Because of that, SPG has cut back on some products along with the SG&A cost structure tied to them; those moves, combined with easier comparisons, should help SPG return to growth, especially if end markets bounce back. Over at Consumer, we'll keep gaining from new products and market share gains, and we're also driving a better product mix, which we expect to more than offset the near-term softness in DIY. Once end markets do recover, consumer is set up for strong profitability growth thanks to the MAP 2025 initiatives that have been put in place. Looking at the consolidated level, the main thing driving EBIT growth should be our MAP 2025 benefits, which include manufacturing and commercial excellence improvements, plus the steps we've taken to make our SG&A structure leaner. That involves leveraging the power of RPM to create efficiencies in areas such as automation, digital selling tools, and centralizing more back office functions. These efficiencies will become more visible over time as we work past the negative short-term under-absorption impact from MAP-enabled plant consolidation. Lastly, thanks to the strong cash flow and debt reductions we made throughout fiscal year 2024, we'll see the benefit of lower interest expense in fiscal year 2025. That wraps up our prepared remarks. We're now happy to take your questions.
Mike Harrison
analystCongratulations on wrapping up the year so well. I'm just wondering about the Performance Coatings segment. It seems like the top-line figure landed perhaps slightly below what you'd been expecting. And I realize you mentioned there were certain project delays occurring. Could you discuss some of the wider patterns you're observing when it comes to project activity, and what degree of visibility you have in that business? I'm especially interested in the remark in here that you anticipate somewhat moderating growth from reshoring affecting that business this year.
Frank Sullivan
executiveCertainly. I believe the largest effect during the quarter for our Performance Coatings Group stemmed from project timing, and we addressed that on our prior call. A number of projects wound up being pulled forward into Q3, which hurt the fourth quarter. We expect continued growth, though at a more modest level within the Performance Coatings Group for the remainder of fiscal '25. So there are still solid results there. Another point I think deserves mention regarding fiscal '24 was the divestiture of several European U.K.-based service businesses within our Performance Coatings Group, which weighed on our results year-over-year. Yet it was the correct decision. It's boosting profitability; and so we'll lap that fairly quickly. And I think those are reasons to believe we'll see positive momentum, but at a more modest rate than what we saw in the past year.
Mike Harrison
analystI was also wondering — you brought up certain MAP 2025 efforts aimed at trimming SG&A, which got put into place in Q4. Could you say more about what those steps involved, plus possibly when any advantages might show up and how big they could be?
Frank Sullivan
executiveCertainly. Those efforts break down into 2 groups. The first involved a required reduction across several of our business units, affecting roughly 170 RPM employees. On an annualized basis, the gains from that should land around $25 million. The second piece concerns what we've discussed before — money going into several major growth areas — so wherever those are generating solid momentum, we're keeping them going, while for those that haven't delivered what we expected, we're scaling them back as fiscal '25 begins.
Kevin McCarthy
analystFrank, I'd like to build on something you mentioned during your prepared remarks. I believe you suggested that certain lower operating rates, along with the fixed cost absorption tied to them, were obscuring a portion of the benefits from the MAP program restructuring. Could you put a number on that? And how do you see that dynamic playing out as we head into fiscal 2025? Might there be less obscuring?
Frank Sullivan
executiveLet me bring in — Rusty can share a few specifics; but broadly speaking, as we've discussed before, and as you're able to observe in the gains for — across the past 2 years in gross profitability, this is the toughest metric to shift. And our MAP efforts have centered on exactly that, bringing production facilities together. Within MAP '25, we're currently pursuing another dozen consolidation opportunities, compared with roughly 30 that we finished under the initial 2020 NAFTA growth program, plus a highly effective, systematized approach to rolling out lean manufacturing and continuous improvement programs across our plants; so our plant footprint is shrinking, and conversion cost productivity is climbing. Every bit of that becomes visible when you sell something; and therefore the sole genuinely solid, nearly 7% organic growth in the fourth quarter came out of our Construction Products Group. The rest — each was either slightly lower. So that's the broad picture; on the specifics, I'll let Rusty speak to that.
Russell Gordon
executiveAbsolutely. Kevin, during fiscal 2024, we saw just above $50 million in negative effects stemming from unfavorable absorption conversion costs. For Q4, that figure came in at slightly more than $15 million, and given this environment of low volume growth, we anticipate seeing more of the same. As is evident across Specialty, Consumer, and now Performance Coatings, these segments are dealing with volume-related difficulties. And like Frank pointed out, while we work through numerous plant consolidation initiatives, we're also constructing new facilities—in India and Malaysia, for instance. We're shutting down certain locations and shifting production into other facilities, which involves higher capital expenditures along with some capacity additions at specific sites. So throughout that process, startup inefficiencies will arise, though in time they'll be resolved and ultimately deliver overall efficiency gains for RPM.
Frank Sullivan
executiveKevin, I'd like to chime in on that, because what you're asking about is essentially the core of how we see things for fiscal '25, where the range is fairly broad. Right now, we're functioning in an overall climate that's low and not growing. Should volumes recover — and my expectation is that happens during the back half of the year — provided economic conditions hold steady, then we'd witness that. Across Specialty Products Group and Consumer, we'll definitely be lapping simpler comparisons. Should volume rise, it would produce quite attractive incremental flow-through to our earnings. That's the reason we've provided a rather wide band. Regarding our EBIT projection, the MAP '25 efforts are going to keep generating strong outcomes. Yet when volume expansion appears, it can benefit our earnings quite substantially.
Kevin McCarthy
analystAnd that's really useful. Perhaps, Frank, just to build on that idea: should volumes begin to rise, how would you describe the contribution margins across your segments, given RPM's updated asset base and cost structure?
Frank Sullivan
executiveI won't get into specifics, but I believe the 2 most important benchmarks for people to keep in mind all year are, first, the gain we achieved in gross profit margins — and you've seen it — and second, that $50 million in unabsorbed overhead cost Rusty mentioned. Each dollar of sales will yield greater profitability thanks to that gross margin. And at some stage, comparisons against these under absorption charges will turn favorable, which will help our product line — or rather, I mean our profitability.
Frank Mitsch
analystCongratulations — I suppose, congratulations to you for predicting fiscal 2024 when you gave your initial guidance. And let me also congratulate Matt on his recent promotion. Since your forecasting has been so solid, Frank, you said you anticipate volume growth maybe in the latter part of fiscal 2025. So I suppose, when you look at your order books, fiscal — sorry, calendar 2024, the second half, we shouldn't be factoring in any DIY type of improvement. Would that be fair?
Frank Sullivan
executiveI'd say that's fair. In fact, I believe both for the fiscal year and during the fourth quarter, we are performing at an extremely high level within our Consumer Group; we have now gone through 15 months, perhaps more, 18 months of negative consumer takeaway throughout the DIY paint space. Part of that, 18 months back, was, I think, still lingering effects from the COVID bump, which was enormous. But as we sit here right now, it's truly driven by housing turnover; we're at a 30-year low when it comes to housing turnover, and housing turnover is one essential factor that drives consumer takeaway. But despite all that, for the year and in the quarter, you're seeing negative units of roughly 1% and — compared with our identifiable peers, that's a fairly strong result in terms of how we're doing; and it's a lot of what Matt mentioned, some market share gains, some new product introductions, some strength in certain new product introductions in the U.K. and Europe. And so I think our Consumer Group is doing quite well in this environment. And I would anticipate that continuing. We don't possess a better crystal ball than anybody else regarding where the economy is headed.
Frank Mitsch
analystI see. That makes sense. You mentioned earlier that your balance sheet keeps getting stronger and that you're producing quite a bit of cash. So that raises the issue of what should be done with that cash. I believe you previously said valuations have somewhat stood in the way when it comes to M&A. I won't ask about PPG specifically or what's happening there. But I was curious whether you could share some thinking about possible M&A opportunities to consider in fiscal 2025.
Frank Sullivan
executiveAbsolutely. As we've discussed, we've made structural gains in how much cash we can generate, so we're now at fresh levels of cash flow, and we anticipate sustaining that and improving it slightly, since additional work remains on the working capital side. Our balance sheet is in the strongest position it has seen in 30 years. As a result, we have ample chances for acquisition activity. I would anticipate that ramping up compared with what has been a fairly modest stretch of acquisitions, especially when you look at RPM's history. We remain focused on small and medium-sized deals that are highly strategic to our businesses, and that is where you will see our attention go.
John McNulty
analystCould you assist us in thinking through the savings tied to those 12 facilities you're shutting down? I get that a portion relates to efficiency gains at other sites, which means realizing the full advantage might require volumes; but should we be factoring in a straightforward cost benefit from the plant rationalization itself?
Frank Sullivan
executiveThose specifics aren't something I have on hand. I'm not sure whether Rusty can take a rough swing at it. Honestly, my grasp of it isn't solid enough to hand you a figure I'd feel confident defending. Rusty, anything further you can add?
Russell Gordon
executiveAbsolutely, John — it’s going to matter a great deal in fiscal ’25. As you’ve probably noticed on several occasions already, for wave 3 of our MAP program in fiscal ’25, we’re forecasting $185 million in annualized MAP savings. That represents the peak year for savings, and a major portion of it comes from these consolidations we have planned.
John McNulty
analystAlright, that's reasonable. So Frank, I suppose, if I look at your guidance for '25, you're getting roughly $25 million in SG&A savings that you mentioned. You also appear to have some fairly meaningful gains from the plant rationalization; so — and it looks like you could reach something around the low to mid-14% margin range by 2025 even with minimal volume growth. Is that how we should be thinking about it? And then volume growth becomes the extra upside that could move you nearer and nearer to that 16% longer-term goal? Is that the correct way to view it?
Frank Sullivan
executiveAbsolutely. I believe we're on pace to hit, in terms of actual delivered results, our targets for fiscal '26; and our program is running at an annualized rate. So we won't see all of those benefits Rusty mentioned during fiscal '25. However, by the close of '25, we'll be realizing the full advantage of plant consolidation and other MAP initiatives. So I think we're in good shape on that front. It simply comes down to volume. And it's the same story again, but we're operating in a low-growth, no-growth environment. And with our MAP '25 success despite flat results, we ought to be able to produce solid EBIT growth; and again, referring to the wide range in EBIT expectations, at the low end, I think we can achieve mid-single-digit EBIT growth. And once we see some volume improvement, you're going to see good growth in the teens. So I don't have much else to say on that because of the uncertainty and the dynamics, especially in our core North American market. I think we're going to remain in this low, no-growth environment in Q1. And we expect that by the time we reach the second half, you're going to see some positive results even if there's no further deterioration simply because we'll be up against easier comps, particularly in consumer and specialty products.
David Huang
analystI suppose the first thing is about the FY '25 guidance, and I think you mentioned pricing being positive. How are we supposed to look at that when it comes to what you charge on project-based construction and what consumers pay? And also, I guess, in which business or segment are you currently observing the biggest price increases compared to a year ago?
Frank Sullivan
executiveBroadly speaking, at this point both pricing and raw materials are fairly steady. Clearly, certain categories have exceptions, moving up or down. Pricing during the quarter came in slightly above where it was, but — so my view is that when we consider price for fiscal '25, it should land around the 1% range, possibly a bit more. Where we keep seeing cost pressures is wages, benefits, and insurance expenses, which is like what other companies face and isn't unique to our sector. In each instance they've eased compared with a few years back; so unless inflation shifts significantly in either direction, I'd expect results to be affected only very modestly.
David Huang
analystOkay, understood. Perhaps I'll ask about PPG once more. Has your level of interest or the scope changed compared with a few months back? And, assuming no acquisitions happen, how should we view capital allocation for FY '25?
Frank Sullivan
executiveSure. Our approach to capital allocation is going to stay as it has been. I'd anticipate $50 million or more. Depending on the situation with share repurchases, I'd expect our Board, when they meet in October, to increase our dividend for a 51st consecutive year. Given our payout ratio — 20 years ago, we consistently had one at or above 50%. Today we're in the mid-30s; so the capacity to raise our cash dividend at a pace more in line with earnings growth is present now. And regarding M&A, I'd expect us to pursue more in the years ahead versus a modest stretch of M&A growth over the last couple of years, mainly centered on small- and medium-sized businesses or product lines.
David Huang
analystI suppose there's nothing new regarding the PPG acquisition?
Frank Sullivan
executiveApart from what was already mentioned, there's nothing to add.
John Roberts
analystTurning to Slide 14, when it comes to guidance for the full year 2025, Rusty said PCG's growth was moderating because of reshoring. Should we take that as delays continuing when it comes to finishing projects? Or is it that activity on new project starts is dropping? Or is it a mix of the two?
Frank Sullivan
executiveIn our Construction Products Group and PCG, part of it is both — certain projects we've already won are slowing down. And beyond that, there's simply the expectation of an environment with low or no growth as we round in PCG and CPG, with comps that are pretty challenging. That's the reverse of what we see in Consumer and Specialty. In both Performance Coatings and Infrastructure products, we anticipate positive growth, though in each quarter of fiscal '25 they'll be rounding some pretty healthy comps.
John Roberts
analystAll right. Could you also refresh our memory on whether tin plate faced tariffs when the previous administration was in office, and what your view is regarding any exposure tied to that?
Matt Schlarb
executiveTariffs did apply to tinplate. Because of that, our packaging costs stayed elevated — this mostly hits, or hits hardest, our Consumer segment — since those prices climbed alongside inflation and simply never declined again. As a result, they've remained stubbornly high, and those tariffs played a part in that.
Ghansham Panjabi
analystSo, circling back to the Consumer segment, could you provide a little additional detail on what specifically you're factoring in for volume growth in that segment for fiscal year '25? I realize you mentioned certain share gains, but do-it-yourself continues to appear somewhat soft.
Frank Sullivan
executiveThat's right. So my expectation is that Q1 in Consumer will resemble Q4. We continue to observe that some consumer takeaways aren't great. The new product launches and a portion of the market share gains we've achieved, plus the growing footprint of the 5-in-1, the patented 5-in-1 spray can. A few exciting new product categories and introductions in DAP are performing well. So by the time we reach the back half, I believe you'll see growth in the low to mid-single-digit range, partly simply because of easier comps; however, in the first quarter, we're operating in the same no-growth environment or slightly negative consumer takeaway that we saw in the spring.
Ghansham Panjabi
analystFor CPG and PCG, the comparisons in CPG are clearly tough. And with PCG, you mentioned some moderation tied to project completions and so on. Do you view that as multi-quarter dynamics that tend to happen? I'm just trying to understand the cycles for those specific segments compared with, say, Consumer, which you can link more directly to something like a change in interest rates, et cetera.
Frank Sullivan
executiveSure. The timing issue hit Q4 the hardest and will carry over somewhat into the early portion of Q1. Even so, many, many hundreds of billions of dollars remain, via the Infrastructure bill and other sources, that will be disbursed as the years go on. A lot of these CHIPS Acts serve as a good illustration. We're well positioned across a number of those projects; however, some have now been slowed down, so the spending is stretched across a period a couple of years longer than initially envisioned. The dollars are still coming. Concrete is being poured with Euclid admixtures and Euclid fibers. And we would expect to capture a reasonable share of the floor and fireproofing coatings and those. So those are just some illustrations. But if you look just at the Intel project here in Ohio, it's moving forward, but at a slightly slower pace than initially envisioned. Beyond that, I think the dynamics driving those businesses continue. We have added sales people. We've introduced new initiatives in the Construction Products Group in particular; we have had a multiyear shift from selling components to selling systems. And that seems to be paying off, as our Construction Products Group outperforms what's a pretty punky new construction and commercial construction environment right now.
Jeff Zekauskas
analystDuring this year, restructuring charges of $30 million were taken by you. Next year, will you take more than that, or will it be less?
Frank Sullivan
executiveGiven a few of those plant consolidations that we discussed before, which are still ahead, my sense is that's likely a fairly solid run rate.
Jeff Zekauskas
analystRegarding those plant consolidations — are they new? During the first 9 months, you spent $0.5 million, $500,000, on plant consolidation. So was there a genuine step-up in cash spending this quarter? Or should we expect one next year?
Frank Sullivan
executiveYes. A couple of larger plant announcements came about in the fourth quarter this year, and that's truly what drove the higher spending in Q4; more broadly, David Dennsteadt, the leader of our Performance Coatings Group supporting all of RPM operations in Europe, moved to Europe a little over a year ago to help coordinate our MAP activities there. As you'll recall, our focus was mostly on North America and getting our plant initiatives started. Then COVID hit, which truly slowed our ability to do what's pretty hands-on on the plant floor process. So with Dave's leadership, plus the support of our associates and our operations in Europe, we're catching up, if you will. And so a meaningful portion of these MAP 2025 plant consolidations are happening and will keep happening in our European operations.
Josh Spector
analystI'd like to ask about the bottom end of your guidance — basically, I take it that implies fairly minimal sales growth. You mention mid-single-digit EBIT growth. I mean, that perhaps lands at up, I don't know, around $50 million, $60 million on the EBIT line. Should we think of what that consists of as pricing possibly being a touch higher, which offsets raws and such, and that roughly $50 million ends up being the MAP savings you believe you can deliver excluding volumes? Or would you factor anything else into that calculation?
Frank Sullivan
executiveThat's essentially it, I'd say. Price will be slightly favorable, though not truly significant unless conditions shift out there; so the way to consider it is the ongoing gains from the MAP initiatives that we'll be accumulating across fiscal '25, offset by the volume or absence of volume under absorption that Rusty mentioned. And once you net all of those, I believe we're still positioned to demonstrate positive momentum on the EBIT line, in both dollars and margin, within a low, no-growth setting. And so Q1 feels quite similar to Q4 in terms of where we stand today, halfway through the quarter. So I think your thinking on the fiscal year is right. And you'll hear me mention repeatedly that our wide range depends on what occurs with volume as we move through the year.
Josh Spector
analystGot it. Thanks for that. So, to take it a step further and consider that under absorption figure you mentioned before — the $50 million from last year — without volumes, that benefit isn't coming through. With volumes, you do have the remaining MAP savings. What I'm really asking is, how much of a volume lift is needed before all the MAP plans actually materialize? Are we talking about 3% to 5%? Or does it take a few years of growth playing catch-up before that roughly 16% margin structure truly shows up?
Frank Sullivan
executiveRight; this will unfold across a few years, but 3% to 4% unit volume growth would deliver a really nice impact on our bottom line.
Steve Byrne
analystDuring the quarter, your cost of goods dropped 5% compared to the same period last year. Could you say what portion of that 5% came from deflation in raw material costs as opposed to, say, your facility consolidations? Since volumes didn't change, it appears these other areas would be responsible. Do you have any thoughts on that?
Matt Schlarb
executiveYes, Steve. Nearly all of that reduction in COGS stemmed from raw material deflation; we saw roughly mid-single-digit deflation in Q4. We began the work of consolidating those plants — the plants in Q4 — but the advantages will truly become apparent as we move through 2025.
Russell Gordon
executiveOn top of that, MAP gave us advantages across both procurement and manufacturing work streams. Those MAP savings came in above $20 million, and they hit cost of goods during the quarter.
Steve Byrne
analystAll right, and perhaps we can dig a bit deeper into your longer-term SG&A forecast. Would a figure in the high 20s as a share of revenue strike you as accurate? Or might you look at combining offices and sales teams, along with other things, past just manufacturing sites?
Frank Sullivan
executiveCertainly. I'd say from a structural standpoint, additional chances exist for us, especially within G&A as time goes on. We've set an objective of eventually bringing SG&A down to roughly 26%. What I can tell you is that RPM's single most valuable asset isn't recorded on our balance sheet, and that's over 2,000 sales — individual sales representatives. We also have additional staff in marketing; therefore, considering the kind of company we are and the entrepreneurial way we serve customers through sales, marketing, and tech service, I don't see us merging sales teams. Thinking back to my grandfather 70-some years ago, having more feet on the street is preferable. A portion of the growth efforts that have pushed our SG&A higher has come from hiring more salespeople; and in cases where that isn't delivering returns, we'll make changes in a business such as our Stonhard flooring operation. Bringing on new sales representatives has substantially boosted their top-line results, so they're producing — within our Performance Coatings Group, they're producing strong organic growth. And that's the way we view SG&A moving forward.
Vincent Andrews
analystOn Consumer, given how differently pro and DIY have performed across the last 24 months, could you begin by telling us where you see your mix today between those two and Consumer? Let's maybe start right there.
Frank Sullivan
executiveAbsolutely. My estimate would be roughly 70% DIY, with pro at about 30%. DAP would be one of our 2 main broad consumer segments — that covers coats, sealants, patch and repair items, and they keep introducing new products — and then there's Rust-Oleum across assorted small-project paint, primers, and similar lines. In Rust-Oleum small-project paint, we lean more toward consumer. When it comes to Zinsser primer and DAP products, my sense is we sit closer to 50 to 50 split between consumer and pro.
Vincent Andrews
analystAnd then to build on that, you brought up a couple of times how you're anticipating a recovery in existing home sales. So I guess I'm wondering, does your portfolio have more exposure to the projects that happen after a home is sold, or to the prep work that could occur before a property is listed? Or do you not really care either way?
Frank Sullivan
executiveWe actually get hit from both sides, since with a sale, we capture both. When you consider a home sale, folks spend time fixing things up, patching and repairing, painting, and that works strongly in our favor given what our products are, especially patch and repair and small-project paint, as opposed to hiring a paint contractor to paint an entire house, which isn't the space we occupy today. And then when someone arrives at a new house, they redecorate rooms and — purchase improvements. And once again, that works to our advantage. So we gain on the sell side and the steps taken to get the house ready to sell, and on the buy side and the steps new homebuyers take. And we aren't seeing that to the degree we did previously, since we're at 30 — literally a 30-year low in housing turnover, because people are stuck in homes due to interest rates and other factors; it's also a big driver of the underperformance in our Specialty Products Group. Our industrial coatings business, which is the largest segment, nearly half of our Specialty Products Group revenues, serves efficient cabinets and all kinds of wood cabinets and woodwork and doors and windows; so we remain tied into a meaningful part of what's still manufactured in the United States. It goes into housing. And that's been a challenge as well, both on the new construction side as well as on the housing turnover side as it relates to furniture or major home improvements.
Vincent Andrews
analystSo, regarding the rise in listed properties we've observed up to now, my guess is your response would be that it simply isn't significant enough to make a real difference for you at this point. Would that be accurate?
Frank Sullivan
executiveYes, that's right. Once more, we're sitting at a 30-year low; and sadly, the Wall Street Journal reported only this week that home prices reached a record high. Consequently, given the inflation we've gone through in North America, the considerable rise in interest rates, how that affects mortgages — all of these are underlying dynamics that aren't favorable. That's the reason I speak about how our Consumer Group has done considering those conditions, with unit volume declining roughly 1% during the quarter being truly exceptional. And it reflects well when set against our clearly identifiable peers. I believe we're delivering solid results given the circumstances present out there. And it's additional evidence that once things shift, we'll witness some good volume gains, especially tied to new shelf placement for abrasives. So we're involved in the sand paper business and expanding. That wasn't a category that existed for RPM 3 or 4 years ago. And we're advancing into some cleaner product categories; therefore, there are quite a few new initiatives that I believe will support growth.
Mike Sison
analystGood way to close out the year. With any luck, the Guardians will keep it going. Frank, suppose demand deteriorates from here on out? I really don't want that to happen. That said, if conditions soften somewhat, could you pull forward part of the MAP savings so we'd still post a solid year compared with your guidance?
Frank Sullivan
executiveAbsolutely. Our folks, I believe, are carrying out the MAP initiatives at an extremely strong level. Whether any of that can be sped up, I'm not sure. My sense is that this is a highly disciplined way of tackling continuous improvement and lean manufacturing practices more widely around the world. One more effort that's delivering for us — and figuring it out likely took 20 years — is the platform strategy for developing markets. Our businesses had efforts that would stop and then restart, whether we grew organically or made smaller purchases, buying companies in Southeast Asia, China, or India; and we've got a leadership team with very strong performance located in South Africa. Thanks to what they've achieved, since that market is unique for our consumer brands, our Construction Products brands, and our Performance Coatings brand — when we bought the South African operation it was essentially a Carboline business, so a Performance Coatings business — they now have sales; they combined administration and production while keeping sales and market focus separate across nearly every RPM brand. Today they oversee the Middle East, Africa, India and Southeast Asia. That's producing substantial returns for us. So for RPM, that's a distinct strategy. The base isn't tiny, yet the growth rates are quite striking, and much more is still ahead there; so those, Michael, are the kinds of things that I believe will let us build positive momentum when growth is low or absent. We don't anticipate things getting worse. Despite everything the headlines say about manufacturing, I'd call it a rolling recession. Whatever is tied to housing — it's visible — and that has benefited our supply chain supplier base, which endured a tough year. Services or tech, I can't address; but in manufacturing, the past 12 or 18 months have been difficult, and we don't expect deterioration. Finally, should conditions worsen, separate from our MAP initiatives, there would be space in the SG&A area for further expense cuts if needed.
Mike Sison
analystUnderstood. Then a brief question on the innovation side. I remember Nudura being a brand with considerable momentum, especially across commercial segments. That said, has any headway been made in bringing that product over to residential uses?
Frank Sullivan
executiveYes, we have, and I'd argue even more crucially, we've made headway in commercial too. So there's a serious push on our end to get Nudura specified, to have it understood, to spread awareness and educate people about Nudura, and to secure specifications for it in new school construction; for example, we've now got a specification across schools in Kentucky, which followed those awful tornadoes a couple of years back. We're expanding that into additional states, especially those sitting in what you'd call Tornado Alley. Getting specified doesn't guarantee we win the job, but you have to educate architects, engineers, and builders. Beyond that, you need to build momentum, and that's beginning to show up in the school segment; so that's a promising space. My final point on Nudura is that my wife and I dealt with an unfortunate sewer flooding situation at our house in Cleveland, Ohio. After spending a few months working with our insurance company to remediate it, we decided to demolish it and put up a new house. So right now we're in the middle of constructing a 5,000 square foot Nudura home, and we're paying the builder directly for it. It's new to the architect and new to the builder, and I'm picking things up alongside them, and the construction products group is aware that I'll be learning firsthand about all the positives they mention regarding Nudura as well as whatever difficulties arise, through direct experience.
Aleksey Yefremov
analystFrank, how do you see infrastructure sales playing out for your business in fiscal '25 and after?
Frank Sullivan
executiveSure. My sense is that this will keep going. There's a $1 trillion infrastructure bill, and it's going to touch a lot of the areas. Then you have the CHIPS Act when it comes to chip manufacturing in the U.S., and in our Performance Coatings Group and Construction Products we're positioned well for some of that work. So I think we'd look for those benefits to show up through 2026. That said, sales growth is going to be more modest than what we saw the past year, simply because we're rounding some very challenging comps. Even so, we'll see positive growth there, and we're positioned well to benefit from it.
Aleksey Yefremov
analystFrank, you had remarks about reshoring possibly decelerating during this fiscal year. Is that largely a matter of comps? Or might some of the pullbacks you're seeing stem from different causes, such as, I don't know, insufficient resources or demand or something along those lines? If you could shed more light on the pullbacks you're already observing.
Frank Sullivan
executiveCertainly. It's a mix of tougher year-over-year figures, plus a deceleration in a number of project completions. I think whether it's — fascinatingly, it involves just as much labor and new facilities, in the sense of training up staff to work at new chip plants or similar, as it does construction workers; but these projects aren't halting, they keep going. The money is available and dedicated; however, I believe the assumption about how it gets spent will now be stretched across a longer stretch of time. So the effect in fiscal '26 will be — pardon me, fiscal '25 will get pushed into '26 and perhaps further out, compared with what was a fairly strong — kick start in fiscal '25.
Frank Sullivan
executiveAppreciating Andrea. So, to wrap up, I want to acknowledge and give thanks to the over 17,000 team members we have worldwide, who are performing at an extremely strong level on our MAP efforts. That is delivering a massive impact for RPM and for the people who hold our stock. I appreciate everyone joining this call; and we're eager to speak with you regarding how fiscal '25 is shaping up in October and to have you take part in our shareholder meeting, which is going to take place at that same time. Thanks once more for your interest in RPM and for putting your money into research, and enjoy whatever remains of what is, shall we say, a summer of 2024 that is flying by very fast. Thank you.
Operator
operatorThat brings today's call to a close. We appreciate you joining us for this presentation, and you're free to leave the line at this point.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete RPM International Inc. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.
Get the API View API docs →This call discussed
For developers and AI pipelines
Programmatic access to RPM International Inc. earnings transcripts and 132,000+ others is available through the
EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments,
full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.
More tools for stock research
OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in RPM International Inc. or any ticker on your watchlist.
StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.