Shivalik Bimetal Controls Limited (513097) Earnings Call Transcript & Summary

November 4, 2026

BSE Limited IN Materials Metals and Mining earnings 68 min

Earnings Call Speaker Segments

Kabir Ghumman

executive
#1

The way we performed in the first half of FY '27 gives this journey a stronger footing. Revenue on a consolidated basis was up roughly 39%, EBITDA climbed 48%, and profit after tax went up 40%. With these numbers, we feel confident about our capacity to expand while also improving profitability. India offers us a growing domestic base, and that is complemented by international customer relationships we have built over many years. And in these markets, what we see as our opportunity is bringing our knowledge of materials and processes to a wider set of customer needs and applications. As we broaden and extend what we are capable of, we will direct capital and resources to places where customer demand backs growth and where the economics give us attractive returns. It is our ambition to play a deeper role in our customers' business and to turn that position into lasting value for our shareholders. Thanks, Shankhini.

Shankhini Saha

operator
#2

We'll move on to the Q&A portion at this point. We're going to begin with the first question. <<operator_script>> Our first question comes from Bhavya Nahar.

Analyst

analyst
#3

I only have a single question. Could you help us get a sense of how much of that inventory increase comes from planned business growth and anticipated demand, as opposed to stocking up because of pricing expectations or geopolitical uncertainty?

Kabir Ghumman

executive
#4

Look, the inventory increase actually stems from several factors. First, as we've mentioned on earlier calls—and you've likely noticed this too—we're actively shifting into various programs. At the outset, we were only talking about direct strip supplies, but we've since moved into assemblies or finished components. In those situations, supply chain timelines have moved somewhat and are still settling, since some programs call for several validation rounds and design changes happen fast. So that has had a modest effect. Beyond that, other business verticals—particularly busbar assemblies and the PCBA work underway—also call for somewhat greater inventory. Still, we're working on it—and I believe Sumer can add some perspective here as well. We're working on specific programs to actively shorten that cycle too.

Sumer Ghumman

executive
#5

So Kabir, essentially this is more of a short-term thing, driven by all the excess development work taking place. Typically, when there's a lot of development happening — as Kabir mentioned — quite a bit of inventory accumulates, but as that business increasingly converts into regular business, and that development turns into regular business, we'll see it taper off. Beyond that, we're already actively running two or three programs aimed at cutting inventory cycles, and those obviously roll out in phases. So we recognize that this is an issue regardless, even without this temporary buildup. It's something we need to tackle and try to rationalize as much as we can.

Shankhini Saha

operator
#6

Our next question comes from Dhaval Shah’s line.

Dhaval Shah

analyst
#7

Those are great figures. So my first question: from what I understand, it takes time for your business to win customer approval. And once approval comes through, the stickiness of that business is high. On that basis, is it fair to assume the current run rate is something we can at least foresee this quarter's revenue sustaining — it becomes a base, and then you grow from there? And my second question concerns the end market segment: what has driven this much growth? Even quarter-on-quarter, we've grown very well. I understand busbar assembly is, I think, should be the big growth driver. And alongside that, your American customer is coming back and you are forward integrating their more scope of work. So if you can just elaborate more, how is the demand scenario looking? What sort of outlook would you like to share with investors? Yes, those are my two questions.

Kabir Ghumman

executive
#8

Part of your second question, I think, was already addressed by what you mentioned at the outset. Look, development takes time. But once the business begins, it's typically there to stay, because a lot of time and investment — from both the customer and our side — has gone into that development. So it's very rare that a business will start and then disappear within a shorter period of time, or for some reason, go away. So of course, it's sustainable. In fact, usually, when business starts, it starts in a somewhat staggered way. So in a sense, one can see that once business starts, you can not only view it as sustainable, you can possibly view it as a longer period of growth as well.

Dhaval Shah

analyst
#9

So is it possible that earnings could speed up? What I mean is, does the business grow once you begin, as you put it, in a staggered way?

Sumer Ghumman

executive
#10

So here's what we're seeing right now — much of the growth, and to get at both what's driving it and the answer to that question, we'll address this piece as well. This time around, the primary driver really hasn't been the PCBAs, the PCB assemblies, or the CCS we're working on. A portion of it has come from there, but it remains quite a minor figure, since those are still things we began doing perhaps one or two months or so back in the last quarter, when we had more increased quantities. Yet as time goes on, that's now shifting, and in the current quarter and the quarters ahead, it's turning into significantly larger volume. In this quarter, though, the one under discussion, it played only a very small part — much more than the quarter before it, but still relatively small. So where, then, is the growth coming from? A lot of the — if you've followed us over roughly the last seven or eight quarters, we've discussed multiple developments taking place with customers. And those aren't for assemblies. Those are for our core principal core components that we manufacture. A lot of those developments have turned into regular business.

Sumer Ghumman

executive
#11

Those accounts used to be in sampling or pilot-lot phases, and today they're regular businesses. Beyond that, a couple of our bigger customers have revised their designs, and those revisions have begun turning into business now. What's interesting to observe is that those changes aren't just contributing to the top line — they're contributing very favorably to the bottom line, which we anticipated, since a vast majority of those developments carried a higher value add. So what we're looking forward to now is at least a few more quarters of that kind of value-added growth, which is precisely the growth we favor as a company, because we believe that, naturally, when something carries higher value added, there's a reason behind it — or a reason a customer pays a higher value add — since it's usually a product that's difficult to make, which also means the threat of competition is reduced. That said, naturally, we're aware that in the foreseeable future, very soon, a larger percentage of our total revenue will come from the Assembly business, which we acknowledge, and we know that as a percentage, margin might be lower, but the scale is far, far bigger.

Sumer Ghumman

executive
#12

So that sort of compensates for it. That's the path you're taking. Still, going back to the first part of what you asked, what's really fueling this expansion right now is the core products rather than the forward integration.

Dhaval Shah

analyst
#13

Understood. So as far as that goes, we're already at nearly a 30%-plus revenue growth run rate for this year. Then, looking at next year and a comparable kind of growth, how do you view your conversation with?

Sumer Ghumman

executive
#14

From a customer's perspective and from a potential one, we believe those kinds of growth figures are achievable. But naturally, there are plenty of ifs and buts, as we discussed earlier — you noted a short time ago that things take time, and development takes time. So at times it's quite hard to predict whether a fresh set of developments underway with a group of customers will come through as anticipated, or perhaps take a bit longer. That's the reason we occasionally see these ups and downs. Still, the scope is there and the opportunity exists. If we manage it properly and get everything right, then this is certainly a sustainable growth possibility — not only across a few quarters, but across a few years.

Dhaval Shah

analyst
#15

And finally, could you give us any updates on the new developments and new products you talked about on the last con call — the ones related to widening our TAM and moving into new products?

Sumer Ghumman

executive
#16

Yes. So at this point, once again, we've moved into a more advanced phase of examining this. What I can clarify further is that the majority of these products we're evaluating or developing or, shall we say, to some degree even have technical investments in, involve specialty materials used in one kind of electronic application or another. So generally put, we have strong interest in growing into particular categories of specialty materials, metals utilized in electronics applications. So if you look at most electronics applications, they rely on some form of specialized metals, and that might call for a particular type of joining, or it might not, but it could be an unusual or very specific thickness or dimension of a material that is typically quite difficult for someone to produce. So those are the items we're working on. And at this point, once again, it's probably not the appropriate moment for us to reveal it publicly. Once we've finalized and made the decision to move forward with it, and we believe the timing is right to make that information public, we will definitely discuss it. But there is a great deal of depth here.

Sumer Ghumman

executive
#17

We've dug pretty far into this development, and very, very soon something is going to happen in this area.

Shankhini Saha

operator
#18

The next question comes from Dhruv Jain. It seems Dhruv has stepped away right now. So we'll proceed to the following participant. The next person to pose a question is Vivek Ganguli. Please go ahead with your questions.

Analyst

analyst
#19

Part of my question has already been addressed. What I was hoping to learn is this: once assembly, busbar, and PCBA grow into a meaningfully larger share of revenue—when that happens—will you report them on their own? Or would Busbar sit within either your Shunt or your contact, and PCB sit inside some other segment among the existing three?

Sumer Ghumman

executive
#20

No — see, what this essentially amounts to is forward integration in the resistor business. That said, we expect a very large scaling opportunity here. So it's going to appear as its own vertical inside the core business.

Analyst

analyst
#21

Alright.

Sumer Ghumman

executive
#22

Correct. It isn’t a separate subsidiary; it belongs within the parent organization.

Analyst

analyst
#23

Right. So that makes it the fourth bucket. At the moment, you present your revenue split into 3 buckets. So this one becomes the fourth bucket. This would be the fourth bucket.

Sumer Ghumman

executive
#24

Right, so that falls into the fourth bucket. Obviously, one of our verticals is a subsidiary — it's a separate legal entity, since at one point it was a joint venture and later became a subsidiary. Aside from that, though, we handle it just like any other product vertical inside the same structure. It's simply a distinct entity in legal terms.

Shankhini Saha

operator
#25

The next person in the question queue is calling from Mahek Talati's line.

Analyst

analyst
#26

Nice work on those results. First, I noticed Shunt volume fell quite a bit—nearly 16%—yet our total top line from the Shunt business rose about 36%. So I have two questions. First, what's driving that sizable volume decline? And second, of this value growth, how much comes from commodity pricing versus how much stems from moving toward forward integration into components?

Sumer Ghumman

executive
#27

Sure, that's a fair question, and if you focus only on Shunt's output volume, things can seem a bit puzzling. What's going on is that a significant portion of the Shunt business is shifting — much of that volume used to come from wide, thicker strip materials, which some of our customers bought as raw material to make resistors further downstream. That has dropped sharply, and every quarter we're producing more and more of the finished resistor. Consequently, we ship fewer kilograms of material, but a far greater number of processing steps are added to it, and as a result, value add — and as a result, an improved bottom line — is added as well. So even though our volume may be declining because that material was going out as thicker and wider stock, as I mentioned. So looking purely at output in kgs is somewhat misleading. This is actually a very ideal position for us to be in, where we send less material and more value add, shipping out more value add. And that is also showing up in our rising or improving profitability.

Analyst

analyst
#28

All right, so this is tied more to forward integration than to commodity pricing, correct? Is that the right way to look at it?

Sumer Ghumman

executive
#29

No, that's a different issue. So the output declining is what — that portion is what I just answered. But to address your other question, which is about materials, metal prices, or the effect of commodity prices: look, first of all, our pricing is structured so that in most cases, for a vast majority of materials, it's essentially a pass-through. So any rise or fall has very little effect on our bottom line. That's why even if commodity prices increase sharply — and they have, in the case of, say, copper, even silver, but copper has had a bigger impact — if you look, even though those numbers have risen, our profitability has still stayed in a similar ballpark. So even if materials decline, likewise, it will have very little effect on the bottom line. And as far as revenue goes, yes, some portion of the growth — even on the last call, I mentioned — some portion of the growth is contributed by material value rising. The good thing is, as I said, it isn't affecting the bottom line. If you were to separate it out, it's very difficult to assign a standard number to it because many different commodities are involved.

Sumer Ghumman

executive
#30

Now, if we broke that out and said, for instance, comparing this quarter with the prior quarter, or this half year with last year's half year, and held all material values — or commodity values for both — equal, we'd still be sitting at a 25%, 26% pure growth level, just looking simply at how many components we ship. So growth is there. Of course, once you factor the materials in, that growth comes out as a somewhat higher number.

Kabir Ghumman

executive
#31

I think I'll add one more point here, and this probably addresses any questions that come up later as well: this also places us in a much stronger position within the supply chain. Broadly speaking, and particularly from the standpoint of automotive applications, the chance that a component gets swapped out mid-cycle during a program is extremely, extremely low when you compare it with the chance of changing the input material — which is what we were doing in earlier models, for instance, where input strip material was being used and someone else had converted it into a finished part. For customers, switching that portion of the supply chain is simpler than switching the end component, because at that level, if a component has to be changed at board level in an automotive application, then it must go through full validation cycles. And that would be a very compelling reason for someone to take that route. So if you win business at the finished part or assembly level, it is essentially virtually locked in for the life of that program.

Analyst

analyst
#32

Got it. The second question had to do with the CCS business. We're already supplying one customer. And I believe on the prior con call, you said talks were underway with another two or three customers. So where do things stand at the qualification stage? Can we — with the volume growth in EV two-wheelers, should we expect a fast turnaround, and could we begin supplying them in, say, Q4 or Q1 or thereabouts?

Kabir Ghumman

executive
#33

So at this point, at least 2 or 3 additional programs have actually reached advanced stages, where the initial prototyping has already been completed. Some of them are currently going through testing. We need to keep in mind that this is also a somewhat new supply chain within India, because previously a lot of this material was imported directly from China. As a result, very little design work or R&D work was taking place at the OEM level and at the supply chain level. That means these validation and fine-tuning cycles take somewhat longer than they perhaps will in a year's time. Obviously, these things will improve rapidly. That said, at least 2 or 3 other programs are now at advanced stages, alongside the one that is running in mass production. And of course, discussions are underway with other players as well.

Shankhini Saha

operator
#34

Anjali Parmar has the next question.

Analyst

analyst
#35

Nice results — well done on those figures. Two things from me. First, you mentioned earlier that you were looking at a handful of inorganic growth opportunities. But now that the dividend has been announced, should we read that as a shift in how capital allocation is being prioritized? Or how are we meant to think about those opportunities from here on?

Sumer Ghumman

executive
#36

No. So after the dividend announcement, it hasn't really had a big effect on how much funding we have available. That's the reason we structured it that way. And we still have — there's sufficient free reserve or free cash held within the business that — look, none of the projects we're currently examining need capital allocated right away. So we aren't chasing, say, an acquisition that has to happen immediately or anything along those lines, where a big chunk of money would be needed all at once. Typically it arrives in a more staggered fashion. So we begin step by step. So there's ample time to plan the funding. That's why we thought that at this moment, it would be preferable, if it's acceptable to everyone, for us to propose this dividend.

Analyst

analyst
#37

Alright. And then, second, with the EV opportunity expanding worldwide, how should we view what SBCL can do in India relative to international markets? And over the coming two to three years, how do you see the split between domestic and export contributions developing?

Sumer Ghumman

executive
#38

On the domestic side — and this picks up where Kabir left off just before — there are a lot of new developments happening in India that we honestly hadn't expected to come about so fast, since the entire ecosystem has moved ahead, or is moving ahead, more quickly than we'd forecast. So our view is that what used to be an opportunity tilted more toward exports — and that's still there, we still have plenty of projects underway and plenty of work in development with both existing and new customers — but beyond that, a great deal of potential now sits with the developments taking shape for the domestic market. So as things progress, we'll see substantial growth arriving in this high value-add sector of our business, or high value-add areas of our business, such as these chant transistor components for the Indian market. Because previously, many of the complete packs, complete battery packs, or complete assemblies — of BMSs, et cetera — were being imported. And now they're gradually being assembled here, and then the component supply chain is taking shape here. So we see a great opportunity now, not only for export but for domestic as well.

Shankhini Saha

operator
#39

Dhruv Jain is up next with a question.

Dhruv Jain

analyst
#40

Sir, my first question relates a little to this quarter. So what we've observed is that revenue from U.S. Shunt volumes has in fact gone down. And if we look at, say, the book-to-bill of one of your bigger customers, it appears their order books are increasing. So could you just clear that up, and is it merely a one-quarter matter, and will things return to normal next quarter? That's my first question. And tied to that, if you could also speak a bit about the Europe business, which is actually performing quite well for you on the Shunt side.

Sumer Ghumman

executive
#41

Could you say that first question one more time? You mentioned volume — is volume what you’re asking about?

Dhruv Jain

analyst
#42

No, Sumer. I was actually referring to the U.S. Shunt volume going down. So I just wanted to get a sense of why that's occurred? Because if you look at, say, a company like Vishay's order book, at least in the...

Sumer Ghumman

executive
#43

Right, right, understood. So essentially, a significant portion of the recent conversions we've completed with our existing U.S. customers falls under a setup where we now supply them directly rather than shipping into the U.S., and much of this shift came about because of the tariff situation that occurred last year. That's what sped this up. Many of those resistors end up being used outside the U.S., so a large share of those shipments no longer pass through the U.S. What you'll notice as a decline is partly — part of that decline originates there. Now, some developments have occurred with our existing U.S. customers that began turning into business more over the last two or three months. So only a portion of that business landed in the prior quarter, or essentially quarter 2. That's why it appears as a decline, though some of it has been offset in other regions — still going to a U.S. customer, but shipped directly to a different region.

Dhruv Jain

analyst
#44

Understood. So going forward, it'll be classified in, say, India or Europe?

Sumer Ghumman

executive
#45

It's mostly Asia, in fact. If you're seeing a great deal of that conversion or a great deal of that diversion, it's actually gone to Asia. So that's going to appear on the Asia geographic side.

Dhruv Jain

analyst
#46

Understood. Now for the second question, on the bimetal side, we've noticed a really sharp rise in the India bimetal figure. I just want to get a sense of what actually shifted, since that vertical has shown sluggish numbers for a while.

Sumer Ghumman

executive
#47

A lot of what we learn from customers tends to be driven more by retail demand, or by retail demand, or by, say, real estate or new construction or new infrastructure projects — a great deal of that demand. There was a period in between when considerable over-inventorization also occurred because demand for these products in India was fairly flat. So quite a bit of inventory built up, and that situation continued for several quarters. Now demand is starting to pick up again to sort of match actual demand. And what we are hearing — or at least coming from a switchgear background, and of course thermostatic biometal is affected by only one portion of the switchgear market. So at least from the information we have from our customers, as well as whatever research we conduct, the outlook generally in India right now for the next two or three quarters for medium and low-voltage switchgear looks good. Okay.

Dhruv Jain

analyst
#48

Alright, that's reasonable. Just one question: could you provide some direction on both the busbar figures and the overall numbers for Shivalik, let's say for FY '27 and FY '28 — how do you see margins and top line shaping up, given the plans you currently have in place?

Sumer Ghumman

executive
#49

Looking at '27 and '28, we anticipate the sorts of developments we have in the assembly business, correct? Let's begin with assembly. There again, which parts convert into business or actually materialize into business depends on many, many factors. But the opportunities out there, which we can go and grab, and when we examine that, we can — anywhere between INR 100 crores to INR 200 crores, somewhere in that range can be considered from just that assembly business. Now when we look at that kind of a business, that business also comes with an expected lower EBITDA margin of maybe 15%, 16% as opposed to maybe 26%, 27% on those lines. So we expect that if, say, on the higher side, even INR 200 crores comes with that lower margin and looking at that number as well as what growth anticipation we have or outlook that we have from our customers for Shunts and all the other legacy product lines and the expected growth in contacts, which is also a 15%, 16% EBITDA margin business, we can possibly see that if we can maybe maintain a similar this 30%, 40%, 30%, 35%, 40% kind of a growth number, if assuming that a lot of these things fall into place, we can expect that in that year.

Sumer Ghumman

executive
#50

Of course, total profitability may rise, yet our margin could decline, perhaps from roughly 1.5% to 2.5%, somewhere within that range, since revenue is being added from these businesses with 15%, 16% EBITDA margins. So that's the kind of profile we see, that we might be heading in that direction. But that also means there could be solid, sustainable revenue growth. So we could be somewhere in maintaining a balance between the two.

Dhruv Jain

analyst
#51

Understood. So to wrap up, I'd say that top line growth of 30%, 35% over the coming two years is something we can sustain. Margins may come down somewhat, though that really comes down to mix.

Sumer Ghumman

executive
#52

Right. And of course, that decline stems partly from newer items being introduced within the stand-alone product verticals — the legacy product verticals — where, honestly, we see no reason for margins to fall. In fact, margins ought to keep getting better as volumes improve further, which could, as a percentage, offset some of the lower-margin business going forward in the foreseeable future.

Shankhini Saha

operator
#53

Naushad will be our next questioner on the line.

Analyst

analyst
#54

Nice work to the team on a solid set of numbers. First, from a leadership standpoint, what gaps do we currently see in the organization? And which critical hires are we assessing right now to move it to the next league of growth?

Sumer Ghumman

executive
#55

Thanks, Naushad. So essentially, apart from the important roles that had recently been left open, those are now sorted out. To start with on the leadership side, the incoming CFO is confirmed and ought to be joining us before December ends. That's one piece. Beyond that, right now we're actively looking at a strong candidate for the COO role. We might give him that title or something different, though the core job would be COO. And the reason partly is that we see a great deal of Shivalik's coming growth, aside from tightening up all our current businesses, coming from these fresh verticals we're about to enter and develop. With Kabir being needed more and more on those projects, it's extremely important to have a highly capable individual in that seat who can assume that responsibility from Kabir. That's the thinking we're applying across many other parts of the company too — having a full leadership team handling all operational matters, so that my role and Kabir's role here can increasingly focus on strategic choices about moving into additional product verticals, since that's truly where the business's real future growth lies.

Sumer Ghumman

executive
#56

In those areas, then, we're focused on hiring. We're actively looking for some key people — a Head of R&D; we've already brought in some new folks in R&D, but we're also searching, depending on which projects we pursue, for another senior position in R&D too. And beyond that, we're also looking at a very senior marketing and salesperson, or marketing as well as a salesperson, with specific experience in electronics. Because since we're a company shifting more from metal work specialized components toward metal components for electronics, that alters the profile somewhat, since that ecosystem is different. So those are the few leadership roles we're considering at this point.

Analyst

analyst
#57

Yes, sir. And then the last—<<inaudible>>

Shankhini Saha

operator
#58

Naushad, we're having trouble hearing you clearly. We'll return to you later. While Naushad gets onto a clearer line, we'll move on to the next participant. Let's take the next question from Prateek Srivastava.

Analyst

analyst
#59

Once more, congratulations on an excellent set of numbers, Sameer and Kabir. Broadly, my question is this — Sameer, I believe you noted that you're witnessing considerably quicker expansion within the end-market mix, correct? Could you shed a bit more light on that? After all, we operate across several distinct markets, don't we? We're present in two-wheelers, EV, four-wheelers, switchgears, industrials, smart meters. How do you expect these end markets to develop going forward? And which would you describe as your more focused area? Then the second related point, naturally, concerns the data center opportunities as well as energy storage opportunities. Are we assessing anything for these business verticals too?

Sumer Ghumman

executive
#60

My take is...

Kabir Ghumman

executive
#61

Yes, I’ll address the second part of the question about data centers and battery BESS applications. So for data centers in both cases, you see that data centers also need multiple switchgear applications. They also need battery management systems. So indirectly, in both cases, we’re seeing demand rise at the component level for those parts. But what’s more interesting on the BESS side is that we’re seeing some applications, which takes me back to my earlier conversation where we were working on some of the other CCS and busbar applications, where some are directly tied to BESS packs. So work is underway on that front as well. It’s very early stages, like as was the case with the two-wheeler EVs; this is — India in general is undergoing a shift where reliance on China for completing battery packs is exponentially decreasing. So that will only fuel the growth rate or at least the speed of development in India.

Analyst

analyst
#62

Understood. And regarding this EV topic, I believe we noted on the deck that when comparing EV with ICE — correct — it's expanding: roughly 2x the Shunt value and 3x the ICE TAM, right, for the EV segment. So what's the Shunt count for each vehicle? And in what ways are we boosting content per vehicle when it comes to EVs?

Kabir Ghumman

executive
#63

So it really depends. When you look at Shunts per vehicle, that number shifts quite a bit based on the category or class of vehicle in question. For lower-end EVs or modern ICE engines, you might now see somewhere in the range of 30 to, say, 50 or 55 Shunts, and that depends on the OEM, on their design, and on their feature list. On the other hand, at the higher end of the spectrum, the top-end vehicles on the road from the top two or three brands — their marquee levels will likely have more than 200, 250 Shunts per vehicle. But clearly, not all of these are large Shunts; these are much smaller SMBs, though they are Shunts nonetheless. So it varies case by case. Now, with our conversion, which we discussed at the start of the call, the conversion into finished parts, a lot of this is also going into end OEM automotive applications. So as we push forward to manufacture more parts, maintain stable quality, and build a good track record in the market, clearly our sales and marketing team is pushing harder to capture a bigger market share of the final pie, so to speak. And you can also appreciate that it was quite a challenge, which is also why this conversion took this long — because for a new player to come in and replace, say, a German or an American supplier that has been supplying finished Shunts for automotive applications for years was definitely something that took a while, along with a lot of fine-tuning in the process and quality controls, to reach that level of accuracy.

Analyst

analyst
#64

Understood, understood. And a final question, this one about blended margins as we look ahead. What kind of blended margins should we be expecting, say, for FY '27 and then as we move into FY '28?

Sumer Ghumman

executive
#65

Okay, suppose we look past that for a moment and consider, say, a 3-year window, looking at where the company is headed. It's possible that eventually we'd reach a 50-50 split in total revenue — one part being a business with roughly 26%, 27% EBITDA, and the other at 15%, 16%. That implies a blended margin somewhere between those, which is what we think could eventually happen at perhaps 3x this year's foreseeable revenue — maybe 3x that revenue — we might find ourselves at, say, a 20%, 21% EBITDA margin level, or perhaps 22%. I'm not certain; it depends on various factors. But somewhere in the middle of that 15%, 16% category, since we see the business eventually moving there. And then we'd intend to handle these two or three different segments differently. Naturally, when we do decide to pursue a product vertical with a lower margin than we're accustomed to or normally target, it typically brings some added benefit that reinforces our core business and is connected to it in some manner or is strategically important to it.

Sumer Ghumman

executive
#66

To answer your question directly, yes — we figure that if revenue were 3x to 4x what it is now, we'd land somewhere in the range of 15% or 16% to 25% or 26%.

Shankhini Saha

operator
#67

Our following question comes from Nirali Gopani.

Nirali Gopani

analyst
#68

Great results — congratulations. It might be a bit repetitive, though there's some growth in there too. So, Sumer, you mentioned that busbar on its own should bring in INR 200 crores of revenue next year. And this year, if H1 and H2 play out similarly, we're at roughly INR 750 crores of revenue. That means this 25%, 30% growth would come entirely from busbars. So then, what's your view on how Shunts will do, or how bimetal will do — mainly given that the shift from strips to components will largely be finished this year. So what's your outlook on that front?

Shankhini Saha

operator
#69

Sumer, I believe your line is muted.

Sumer Ghumman

executive
#70

Yes, sorry about that. I believe there might be a slight misunderstanding regarding what you took away. If we consider the current year, or suppose you're considering the following year — what I had said was that these opportunities in these assembly businesses, that revenue, does exist. It's out there, though whether we manage to capture a large share of it is a separate matter. So it isn't as though we are certain to land that business. The opportunity is present. We're building the ecosystem so we can take it on. So if everything works out, yes, that's a possibility — perhaps even more than that is possible. And at that point, that year included, we would also likely keep seeing a reasonable level of growth in our existing product verticals. So when we reach the end of 2028 or near the close of financial year '27, '28, we'd be in a position where even with the PCB business at a value of INR 200 crores or INR 250 crore, it probably still wouldn't exceed around 15% to 18% of total revenue.

Sumer Ghumman

executive
#71

That margin business shouldn’t be viewed on a standalone basis, because if the other businesses weren’t expected to grow—or if we weren’t anticipating growth there—then yes, your interpretation would likely be right. But that isn’t what’s happening, since there are many developments we’ve discussed ever since this call began concerning a lot of the existing products. Look, I think—and I’ve said this earlier, and for everyone’s benefit I’d like to say it once more—we don’t anticipate, nor do we regard, any of our PCBA assemblies, PCB business, or PCB assembly businesses as becoming a core product for us. This is a product for which we make assemblies: A, for what the customer requires; B, because it has to be sold in that form. So if our cladded components or our EV welded components have to go in that form, they must go as an assembly. So it’s essentially an extension of our product and can’t simply be seen as something we would be doing otherwise. It is a very, very important extension of what we already do in the Shunt resistor business. Now, once you look at it that way, your understanding of that product will be a little different.

Sumer Ghumman

executive
#72

But as we dig further into this, we're seeing a huge opportunity to scale up. And honestly, that's likely a very good thing for Shivalik, since that's precisely the type of scale-up a business like ours requires. You see, our business works in such a way that years of development might bring a highly profitable INR 20 crore business onto our top line. And for us, that's a reason to celebrate. Yet from an outside investor's view, you might not even spot it, because INR 20 crores added to the top line with a decent margin may not stand out on a stand-alone basis in the numbers. So having a combination of those plus this sort of scaling opportunity — these are very important things. But the main reason will always remain that this is an extension of our existing core product.

Nirali Gopani

analyst
#73

Got it, that's very clear. And then second, regarding CapEx, what type of CapEx are we planning for this year? And where do we intend to focus that? For instance, which areas are we looking to expand?

Sumer Ghumman

executive
#74

I believe Kabir can provide some clarity regarding the CapEx.

Kabir Ghumman

executive
#75

Yes. So, looking ahead, the main priority is going to be, first, boosting capacity in downstream processes, since—as we've mentioned before—that's the key. If you consider the main product categories, when it comes to the actual diffusion or the merging of metals for either of the business verticals, those principal processes already have enough capacity. But whenever it's needed, based on market demand or the order book, we have to enhance the downstream processes, and that's a fairly fast cycle to upgrade. So there will be some CapEx spending on expanding capacity in downstream processes at the parts level and the assembly level. The other area where we are—and have been for the last two quarters, and will continue—putting a lot of work is automation. So end-of-line calibration testing. As we move further into integrated assemblies, the complexity and the criticality of these test and calibration systems also increase. So there's going to be some CapEx involved there, which is already ongoing. Then, of course, for PCB and PCBA type of parts, we are also planning certain expansions and CapEx spending there as well.

Nirali Gopani

analyst
#76

Great, great. And finally, about the busbar — right now we’re doing work for a two-wheeler, and you mentioned that talks are underway with additional customers as well. You also said there’s an opportunity in four-wheelers too. So do you have any thoughts on that? Are we getting any closer, or are any of those discussions taking place with four-wheeler OEMs, or anything along those lines or on that front?

Kabir Ghumman

executive
#77

Nirali, we're at a very early stage right now, but on the two-wheeler side we're seeing quicker traction and faster growth or activity. You're probably following the news where, I think last month or the month before, almost 40% of two-wheelers sold were electric — or 30%, 35% were electric. So those kinds of numbers are nowhere near what you see in the four-wheeler market. So it's directly proportional to that activity we're seeing in terms of new vehicle registrations versus the activity we're seeing in the supply chain, two-wheelers versus four-wheelers. So talks are ongoing, but the pace of adoption acceleration is quicker on the two-wheeler side.

Shankhini Saha

operator
#78

The next person to ask a question is Ajay Surya.

Analyst

analyst
#79

Thank you for the kind words about our performance. My first question relates to the electrical contact business. We added capacity a couple of quarters ago, so I'd like to get a sense of where utilization stands right now in that contact business. Also, when do you think it might reach full capacity? I'm sure you've covered this before, but silver prices came down again this quarter, yet our business has held up on both revenue and margins. I assume that's partly because volumes are rising, or perhaps there's some kind of pass-through. If you could share a bit more detail on the volume growth we should expect in this business, that would help. And should we treat this quarter's margin as some kind of sustainable benchmark going forward for our electrical contracts business?

Sumer Ghumman

executive
#80

I'll begin with the second part of your question, since it ties into the first part. Broadly, what we've been doing — and this goes back to decisions we made a few years ago — is that we wanted to move increasingly away from components that use a lot of silver, because at one point we concluded we don't want to enter the silver manufacturing business. That isn't our specialization; handling bullion brings its own complications, and it's not our core business. What we do best is achieving a good quality of joining between complicated materials and producing very complicated components for which toolings are hard to make and tool designs are hard to make. So why move away from that core competency? We also noticed there was a void in the market. As a result, we concentrated on making the components rather than going down the silver route. That's why, over the years, you see the impact of silver prices on us has been minimal. At times, slowly, it can show up in revenue, particularly when the jumps are too high, but it doesn't hit our margins as deeply. There is a slight impact when silver rises too much — for example, in one quarter last year, silver went from INR 1.5 lakhs to INR 3.5 lakhs.

Sumer Ghumman

executive
#81

When a jump like that happens—and we all recognize it's quite an uncommon situation—it can have a modest effect, since a portion of our pricing is tied to silver, though that portion is quite small. So there will be some impact. In the same way, when it declines, the effect will be very minimal as well. For silver to begin appearing in our margin, it would need to crash to 25% of its value. And even in that case, the impact would only be to a limited extent, because the bulk of our profitability stems from the manufacturing process, which stays the same either way. So naturally, overall revenue may look different. Turning to today, if we compare silver with, say, the equivalent quarter a year ago, perhaps silver is still at double that value. And when 64% or 65% of all materials being used are affected, there will be some impact. So if you look at our contacts business, it has grown by nearly more than, I think, 100% or so, of which 40% to 50% is purely due to materials, and the remaining balance is actually due to customer-related growth in customer development as well as an actual increase in product.

Sumer Ghumman

executive
#82

We’re in a really good position because, along with that jump in silver, we’ve also grown the business quite a lot over the past 12 months. If we hadn’t done that, and all our top line growth had come just from silver, that would have been worrying. And now, as you rightly said, we began moving to the new facility 2 quarters ago. By July of this year—or the end of June, or early July this year—that facility was running at full capacity. The effect of that extra capacity is now visible in some of our figures, since many of our current customers wanted to increase the wallet share they give us. So because of that, we’re seeing growth rise further. We expect this kind of growth trajectory to keep going until we get to a certain point with our customers or with new development. And honestly, for us as a company, since we aren’t in silver manufacturing, whether silver prices rise or fall isn’t a big worry for us. And of course, learning specifically from what happened over the past 12 months, we’ve made sure it has no impact on us, or only a minimal impact.

Sumer Ghumman

executive
#83

Turning to the capacity question. In the contacts business, we have 4 or 5 distinct product types, and they're quite close to thermostatic biometal manufacturing, where there's a core process plus some 8 or 9 processes either downstream or ahead of it in preparation. That makes it very hard to state what the capacity is, but we usually base our total capacity calculation on the core process, since those are the ones that are difficult or expensive to add at short notice. Downstream processing and finishing can be brought on in a shorter timeframe. So those can always be scaled up or down. As for the core processes, for one of our product types, which accounts for almost 50% of total revenue, that business is presently operating at 50% to 60% capacity after adding this revenue. So let's say we take 50% of the overall revenue we expect this year from the contacts business and say that it's running at half. Then it has the potential to double. So half of that revenue we're expecting has the potential to double with no added CapEx. And similarly, in the other areas, in one of our processes, we're running at maybe around 30% capacity.

Sumer Ghumman

executive
#84

And if you strip out a mix — well, there's no need to get into those specifics. But taking out a mix, I think it's fair to say we're running at roughly 55%, 60%. Originally, with this CapEx, we set this plant up at approximately INR 300 crores, INR 350 crore revenue potential, but that was figured at half the silver value. So let's say at this silver value, that figure would come to about INR 400 crores. We possibly expect that we should cross somewhere between 50% to 60% of that number this year alone. So by the end of this year, we should probably be at around 55% capacity utilization, to answer your question.

Analyst

analyst
#85

Appreciate the thorough explanation — that clears this part up nicely. Sir, one question on — sir, just one question regarding our stand-alone business. So sir, did the PCB or CCS business contribute anything, given that it was included in the stand-alone business, if you could clarify?

Sumer Ghumman

executive
#86

Pretty minimal. Ajay, it wasn't above — I believe if you consider the stand-alone business, it was likely no more than 6% or 7%, not even that, though perhaps roughly, let's say 5% to 7%, somewhere around there.

Analyst

analyst
#87

My question was really more about, you know, if I look at the stand-alone margins, especially, that's now grown to closer to 30%. And from past calls, I think we can tell that this has come about because of Shunts shifting from maybe strip to assembly. But sir, could you give us maybe a percentage — what share of our Shunt volumes today is in strip form versus assemblies form, and where that might get to in maybe a couple of years going forward? Because that would help us explain the growth we maybe expect in Shunts. And can we also move this model of maybe selling only strip to maybe set or assembly, which could be repeated across all our customer base?

Sumer Ghumman

executive
#88

This has actually played out with the bulk of the customer base. Look, there was only a very limited group—not limited by volume, but a narrow set of customers—with whom we had that type of arrangement, and at this point it's more or less entirely gone. To give you a bit of history, part of why that situation existed is that our expertise lay in producing that strip, not really in all the various complicated components. The high value-added components, then, are a more recent technical addition for us. By recent I mean from 2019 or 2020 onward, when we began building the capability to manufacture these complicated components that carry these kinds of margins. Of course, to everyone that may sound like a long stretch. But then again, given that developing a customer takes two or three years, a five- or six-year period isn't much from that standpoint. So for us this is a fairly recent development. That's why originally a lot of the resistor business began as strip. And as we've built the capability to make these smaller components, most of our new developments already take that form.

Sumer Ghumman

executive
#89

And most of our existing legacy business has already been converted. So I still agree with your point — what you're suggesting is that this approach can be applied in other ways too. We always need to consider what we can do, whether that's in thermostatic biometal or in Shunt, to take things one step further and extract higher value from the same product. And we're actively working on that as well, because as a company we've changed how we think about revenue and profitability and what those figures mean. That shift goes back a few years, when we were more focused on the product. Our focus on the product remains the same, but we've also begun looking at our strategy around these things. If we can deliver better value going forward and win more business as a result, then why not?

Shankhini Saha

operator
#90

Thank you, Sumer, and thank you, Ajay, for those questions. We would be glad to address your follow-ups at another point. Given how much time we have, we'll take the final question. Our final question comes from Harsh Mulchandani, a participant.

Analyst

analyst
#91

I was hoping to get some clarity—we saw some revenue loss in the U.S. related to the Shunt business in PPT. So what I'd like to understand is whether we're actually losing market share, or whether there's some dynamic specific to that particular market, and whether we can regain those volumes going forward with respect to the Shunt business in the Americas?

Sumer Ghumman

executive
#92

So Harsh, much of this stems from a vast — a major couple of customers of ours with whom we now have an arrangement where, rather than supplying what we did earlier, just before this conversation with Ajay about — we've converted some strip business, along with some business accounts, into components. Now many of those components, and in certain cases 70%, 80% of them, get used outside the United States. So what has happened as a result is that, as part of an arrangement with those customers, we now supply directly to their end users of those parts. So what shows up as the U.S. numbers going down is actually going to a U.S. customer, but directly to its final user outside the U.S. In most cases, that is actually Asia. That is why you'll see that Asian quantities have also risen disproportionately. So a lot of the U.S. business is actually now showing up as Asia.

Analyst

analyst
#93

Understood. And one final question regarding CapEx. A figure of INR 1,300 crore was referenced in connection with capacity. So if growth keeps pace at this rate, we might get nearer to those figures. You also said we're undertaking additional CapEx. I just wanted to ask whether you could help me understand where we see capacities over the next couple of years, along with a bit about the utilization we're targeting?

Sumer Ghumman

executive
#94

Certain segments, then, have expanded at a quicker pace than others. In those places, we've already invested somewhat more CapEx toward boosting capacity, which Kabir brought up during one of the earlier questions. On capacity enhancement—you'll notice that the way our products function isn't like a standard manufacturing operation, where a given quantity of capacity ties directly to a given quantity of revenue. Our business operates somewhat differently. Certain components might rise in volume, and because of that, an added process could become necessary, while the core process might not require any addition. So the math isn't that straightforward, though we recognize we need to provide some sort of average figure. Some capacity enhancement has therefore already been carried out. It would be fair to say that the INR 1,300 crore figure will likely look somewhat different at this point—it will sit higher than that. We also bear in mind that in whichever product vertical or whichever area is already approaching a degree of capacity tightness, we already hold plans for expanding it. That said, the bulk of capacity enhancement calling for heavy CapEx—or heavy CapEx, rather—is precisely where we still have ample room on hand.

Sumer Ghumman

executive
#95

The capacity increases we’re able to complete quickly and at a lower cost are the ones where some enhancement might be needed. So we’re in a very safe position to make sure that, before any over-utilization of capacity occurs, we’re in the right place — or the right position — to enhance it at the right time.

Shankhini Saha

operator
#96

Appreciate it, Harsh, and thank you as well, Kabir and Sumer. I notice a few additional participants have raised their hands. So please don't hesitate to get in touch with the IR team. We'll make sure management gives you concrete answers. We'd also like to let you know that we're arranging some meetings in Mumbai shortly. So please do reach out, and we can take your consideration into account. With that, we'll wrap up this call for this afternoon. I'll turn things back to Sumer for closing remarks.

Sumer Ghumman

executive
#97

Thanks, Shankhini. Appreciate you taking the time and for those thoughtful questions. We head into the second half with a stronger earnings base and a clear set of priorities. As we said in our discussions, our focus is on sustaining core profitability, improving cash conversion and progressing new programs through customer adoption. We remain confident in the opportunities ahead, and we will pursue them with discipline in execution and capital allocation. Thank you for your continued trust in Shivalik.

Shankhini Saha

operator
#98

Thank you, Sumer. And thank you, Kabir.

Sumer Ghumman

executive
#99

Thanks so much, everyone. And I appreciate all of you taking the time to join us this afternoon. We're excited about what comes next as Shivalik moves into its next stage of growth. Cheers, everybody.

Shankhini Saha

operator
#100

Appreciate it. Goodbye. We're able to disconnect at this point. Thank you. Goodbye.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Shivalik Bimetal Controls Limited transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.

Get the API View API docs →

This call discussed

For developers and AI pipelines

Programmatic access to Shivalik Bimetal Controls Limited earnings transcripts and 132,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Shivalik Bimetal Controls Limited or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.