Snap-on Incorporated (SNA) Earnings Call Transcript & Summary

October 22, 2026

New York Stock Exchange US Industrials Machinery earnings 65 min

What were the key takeaways from Snap-on Incorporated's October 22, 2026 earnings call?

In the third quarter of fiscal year 2026, Snap-on Incorporated reported revenue of $1.1837 billion, reflecting a slight increase of 0.6% year-over-year. However, organic sales declined by 2.8%, primarily due to the impact of rising diesel prices on franchisee purchasing behavior. Earnings per share (EPS) came in at $4.64, down from $5.02 in the prior year, influenced by a nonrecurring legal settlement in 2025. Management maintained a cautious outlook, indicating that while the core technician market remains stable, the volatility in diesel prices has led to inventory reductions among franchisees, affecting sales dynamics moving forward.

What topics did Snap-on Incorporated cover?

  • Impact of Diesel Prices: Management highlighted the 'precipitous and unprecedented acceleration in diesel fuel prices' as a significant factor affecting franchisee purchasing behavior. This led to a reduction in inventory as franchisees aimed to manage cash flow amidst rising costs.
  • Strength in Critical Industries: The Commercial & Industrial (C&I) segment reported sales of $404.3 million, with an organic sales gain of 7.4%, marking an all-time high. Management noted that 'C&I keeps taking full advantage of the favorability,' driven by demand in military and general industries.
  • Tools Group Performance: The Tools Group experienced a 7% organic sales decline, attributed to franchisees pulling back on inventory due to economic uncertainty. Operating income fell to $84.8 million from $109.9 million the previous year, resulting in an operating margin decrease to 18%.
  • RS&I Group Challenges: The Repair Systems & Information (RS&I) group reported a 5.5% organic sales decline, primarily due to lower sales to OEM dealerships. Operating earnings were $116.1 million, down from $141.2 million last year, reflecting the impact of reduced program-related activity.
  • Gross Margin Resilience: Despite the challenging environment, Snap-on maintained a gross margin of 51%, up 10 basis points year-over-year. Management emphasized this as a demonstration of the company's resilience amidst turbulence.

What were Snap-on Incorporated's October 22, 2026 results?

  • Organic Sales Decline: 2.8%
  • EPS: $4.64 (down from $5.02 last year)
  • C&I Sales: $404.3 million (7.4% organic gain)
  • Tools Group Sales: $471.5 million (down 7% organically)
  • RS&I Sales: $454.7 million (5.5% organic decline)
  • Gross Margin: 51%

The earnings call revealed mixed results for Snap-on, with strong performance in critical industries but challenges in the Tools Group and RS&I segments due to external pressures. The company's ability to maintain gross margins amidst rising costs is a positive sign, but the impact of diesel prices on franchisee behavior remains a concern. Investors should monitor the stability of the technician market and any potential recovery in OEM dealership activity as key factors influencing future performance.

Earnings Call Speaker Segments

Sara Verbsky

executive
#1

Thanks, Chloe, and good morning to all of you; we're glad you could be with us today as we go over Snap-on's third quarter results, which are laid out in the press release we put out earlier this morning. Joining us on the call are Nick Pinchuk, Snap-on's Chief Executive Officer, and Aldo Pagliari, Snap-on's Chief Financial Officer. Nick will start things off this morning by sharing his view of how we performed. After that, Aldo will walk through a more detailed review of our financial results. Once Nick offers some closing thoughts, we'll open it up for your questions. As we typically do, we've provided slides to go along with our discussion. You can access these slides under the Downloads tab in the webcast viewer, and also on our website, snapon.com, in the Investors section. The slides will be archived on our website together with a transcript of today's call. Any statements made on this call concerning management's expectations, estimates, or beliefs, or that otherwise address management's or the company's outlook, plans, or projections, are forward-looking statements, and actual results may differ materially from those made in such statements. Additional information, along with the factors that could cause our results to differ materially from those in the forward-looking statements, is contained in our SEC filings. Lastly, this presentation includes non-GAAP measures of financial performance, which are not meant to be considered in isolation or as a substitute for their GAAP counterparts. Additional information regarding these measures is included in our earnings release issued today, which can be found on our website. With that said, I'd now like to hand the call over to Nick Pinchuk. Nick?

Nick Pinchuk

executive
#2

Thanks, Sara. Morning, everyone. As usual, I'll give my perspective on the markets we serve, how we performed, and what lies ahead. Aldo will then walk through the financials in detail. We're living through genuinely interesting times — the Snap-on quarter alone proves that point; it takes a bit of unpacking, but three main themes largely shaped our quarter. First, the effect of diesel prices, even though the technician market is fundamentally stable. Second, critical industries that keep climbing to new highs. And third, Snap-on's ability to soak up significant turbulence and, in spite of the challenges, hold margins at strong levels. So when you put it all together, the headline is that we delivered a mixed set of numbers — a quarter shaped by turbulence, but with some bright spots coming through from the fundamental strength of the business. Now let's get into the results. In Q3, reported sales came in at $1,183.7 million, up 0.6%. If you strip out currency effects and acquisitions, organic sales declined 2.8%, and performance varied by segment across the company — we'll get into that in a bit. OpCo Operating Income, or OI, was $248.1 million for the quarter, compared with $278.5 million a year ago — and it's worth flagging that last year's figure included $22 million tied to a 2025 non-recurring legal settlement. Our OI margin came in at 21%, which is 240 basis points below last year—though 190 basis points of that came from the legal gain. If you set aside that one-time legal item, our OI margin was off by 50 basis points. Gross margin rose 10 basis points, reaching 51%, which I'd call quite robust—strong given the environment. That really shows Snap-on's resilience. Essentially, our margin reflects both solid gross margins and confidence in the path ahead, which drives us to keep investing in maintaining and strengthening our advantages in products, brands, and people, even amid a wave of turbulence. We're acting on our view that there's substantial opportunity ahead and our determination to pursue that potential with everything we've got. Financial services operating income came in at $68.3 million, a modest decline from the $68.9 million posted a year ago, and the total as-reported OI margin for the quarter, spanning both financial and OpCo, landed at 24.7%. EPS for the quarter was $4.64, under last year's $5.02, which as before reflected a legal item from the prior year that added $0.31 to the 2025 figures. That covers the results. Now let's turn to the market. Vehicle repair presents a mixed picture, with different sub-sectors of players seeing things differently, yet the underlying market is still strong. During our quarterly shop visits, we keep finding the garages packed and bustling, with owners and managers perpetually hunting for additional techs—that's the very first subject they bring up when you meet them. As for the technicians, they're occupied, doing well, and perceive ongoing steadiness in their employment and earnings. At the most basic level, repair work is fundamentally robust, and the figures confirm it. Mid-single-digit growth describes what households are spending to fix up their vehicles, and technician pay continues to rise. A garage job remains an excellent one; in the current environment, techs stay financially solid. They're able to purchase anything they want or need, and yet confidence remains weak concurrently. In fact, judging by a number of articles in, I believe, respected publications, papers, and magazines, diminished confidence in the near term is a view that now seems more widespread across the economy. For the techs, this keeps showing up as hesitancy to take on the extended financial commitments tied to big-ticket items. Loan originations fell once more this quarter, which reflects that sentiment. Attention is on faster-payback items such as power tools and hand tools; essentially, it's a story you've been telling for a while. It's a steady story. Vehicle repair itself stays strong, as it has been. Snap-on's route to our tech customers runs through the franchisees. Until now, they've been comparatively untouched by the environment. Diesel prices have jumped sharply in a way we haven't seen before, and that's gotten franchisees' attention. So they've built up cash reserves to cover rising fuel expenses comfortably by trimming inventory. You can see it in our results. Purchases by the vans went down, while the volume moving off the trucks to technicians is holding firm. The knock-on effect created sizable fluctuations in our performance as that downward wave works its way through. Even though the figures look choppy, the fundamental tech market underneath is unchanged from where it's stood for some time; among the upstream folks—owners and managers of vehicle repair shops—conditions are once again a mixed bag. Independent shops are feeling relatively upbeat, recognizing what I'd describe as, I think, the golden era of auto repair. There's a lot of room for additional business as vehicles become more advanced and the car park keeps changing. They clearly understand the demand for smarter systems that keep pace with those difficult trends. Snap-on offers precisely the right products for that job. For OEM dealerships, things look rather different. Their repair bays are occupied, yet dealerships are usually swayed heavily by new car sales, and that situation is not as favorable. Volume has declined, which I believe reflects fewer new car model launches. Buyers aren't as keen to purchase older models. Naturally, the difficulties caused by those lower volumes carry over into repair departments, which somewhat reduces their willingness to invest in shop upgrades. Also, with fewer new vehicles coming out, there are fewer tool-up programs for supporting new models, which pushes our program business—already uneven—down further, and the RS&I figures reflect that. In those figures, total volume has declined, but a large share of the gap comes from lower EQS project-driven business, the uneven portion. So on the whole, vehicle repair is holding up nicely, even though a fair number of sectors have felt the effects of difficulties that arose during the period, one could say. Moving on to the critical industries—the area where C&I operates—I can report that conditions appear favorable. Throughout this stretch, experts continue to describe the economy as strong. That's all part of it. Military, general industries, and natural resources are fields where mistakes are very expensive and where consistency and dependability matter so much that a product at Snap-on's level makes sense. In this segment, growing emphasis on precision and efficiency is driving demand toward increasingly tailored offerings. That is precisely where Snap-on excels. We're delighted to hear it, and the encouraging C&I figures confirm this. And it's not only this quarter. C&I keeps taking full advantage of the favorable conditions, accumulating gains every quarter; those are the markets. Vehicle repair was uneven, though the core was solid. The critical industries are thriving. Now let's proceed to the segments. Let's discuss C&I. We saw an encouraging show of strength. Revenue reached $404.3 million, with organic sales up 7.4%, and that figure leaves out the $10 million contributed by the recently completed Hi-Force acquisition. That marks a record high.

Nick Pinchuk

executive
#3

That's a strong gain, and it comes from fresh product introductions that are truly innovative, plus the momentum building in the industrial segment, which is being propelled by rising need for our tailored solutions across the military and general industries as well as natural resources. We saw broad-based volume growth throughout the critical industries. When you look at earnings, the C&I picture looks even stronger. Operating income came in at $74.7 million, a rise of $17.3 million, or 29.9%, while the operating margin reached 18.5%, an increase of 290 basis points. That marks another record for the group. Gangbusters. Industrial was the biggest contributor, sustaining the forward push and moving Snap-on past the garage in a very profitable manner. In C&I this quarter, the focus was really on leveraging customer relationships, observing work as it happens, and identifying complicated needs along with engineering answers that make the job easier. That process was executed with genuine precision at our Murphy, North Carolina power tool plant. Our power tools are designed around specific repair jobs instead of covering a broad range of industries. As an illustration, the team launched in September something entirely new — the CTR851 14.4 volt 3/8 inch drive flex head cordless ratchet. Unlike anything else in its class, the head pivots 30 degrees both forward and backward—which accounts for 60% of its total range of motion—and it was built specifically for cramped engine bays. Technicians really like this tool. Today's engines are packed in tightly, and getting past obstructions to access parts that need repair or replacement frequently requires additional effort. This little standout is compact in the vertical dimension, sliding in between hoses and frame rails, while the articulating head allows the technician to dial in exactly the right approach angle for reaching the fastener. After it's engaged, 60 foot-pounds of torque along with 275 RPMs make quick work of pulling or driving a bolt. There's also a ring-of-fire LED system on the tool that illuminates the work area. That's one more concept that proves particularly effective in tight quarters. The CTR851 pays for itself fast—precisely the kind of product technicians want. For Murphy, it's a strong new option in the range. The CT9055 1/2-inch 18-volt cordless impact is another Murphy standout. Small in size but hugely capable. Reach and strength combined: it delivers 1,400 foot-pounds of torque, more than even pneumatic tools achieve, making it the most powerful 1/2-inch tool we've ever produced. Suspension work and tough applications become quick work with it, and it runs on our new accelerated tabless battery platform, which means longer runtime and greater power. This is one more innovation boosting productivity and turning complicated jobs into easy ones—and customers are impressed. That's the C&I picture: we're setting a higher standard. Organic sales rose 7.4%, operating income climbed 29.9%, and operating margin hit a new all-time high of 18.5%. What a fantastic quarter. C&I is rolling out customized solutions and keeping up its strong momentum in the critical industries. It's moving beyond the garage and achieving new levels of profitability; now let's look at the Tools Group. Sales came in at $471.5 million, a 7% organic decline. Franchisees are drawing down their inventory and freeing up cash in response to accelerating fuel prices, even as technician spending holds steady. Operating income was $84.8 million versus $109.9 million a year ago. That margin reflected lower volumes together with continued investment in brand, product, and people. Operating margin came in at 18%, down 370 basis points. We had another quarter where customer connection was evident in the Tools Group. One example is our tool storage plant in Algona, Iowa — folks often ask whether the pivot will keep going, and the answer is yes. That Algona, Iowa facility launched the KHP430A roll cart. It comes in nine colors and has a small, compact footprint that works well for moving tools around the shop floor, featuring six drawers and a deep 9 inch top compartment that organizes large items, along with a power strip for chargers, lights, and electrical devices. It's quite versatile. When I mention maneuvering tools, I'm talking about a lot of tools. This single-piece welded frame comes in at 248 pounds but can handle a 2,400-pound load. We really mean it when we tell you it'll carry a ton of tools. Beyond that, the top of the two-piece sliding bed liner slides beneath raised vehicles, bringing the technician's full set of tools directly to where the work happens—improving productivity and reducing the wasted movement of heading back to a bigger box to grab a tool that's needed; its price point makes it qualify as an item with a faster payback. Tools Group is bringing quick payback to a broader range of products. One more retention story involves something that sounds really straightforward to most people, yet it can easily turn into a larger issue. Consider wheel bearing dust caps—tiny, ordinary parts whose job is holding grease inside a hub assembly and blocking dirt from getting in. That lets the wheel function and roll down the road without trouble. You understand the idea. Swapping one out tends to be an ordinary task. If a dust cap fails to seat correctly, though, trouble begins. What should be an easy fix ends up meaning harmed components, rework, and possibly a breakdown. Faced with that problem, our engineers came up with the new A1310DCT, designed specifically for dust caps. It comes with three adapters in different sizes, which work either with a drive handle or together with an air hammer. Techs get plenty of versatility to match the job at hand. The tool's effectiveness comes from how simple it is. The adapter cradle holds the metal cap and spreads the force evenly, which helps seat the part without deforming the outer shell. That means easier and more dependable seating of the component, plus a better seal and fewer chances of trouble later on. It's the sort of product that tackles the everyday frustrations technicians commonly face. It's not anything fancy—just a more intelligent approach to completing the work correctly, which saves considerable time, and it comes from feedback we received. The techs have picked up on it. They're fans of it. That's the Tools Group. Diesel prices climbing sharply, franchisees drawing on inventories, tech spending holding firm, and the group applying insights and observations to craft products tailored to specific applications. Turning to RS&I. Sales for the quarter reached $454.7 million, down 2.2%, including $15.6 million from the recently acquired Diesel Laptops, along with an organic decrease of 5.5%, primarily due to low and uneven volumes in the OEM segment resulting from fewer new model release programs. We achieved progress in our database and shop management offerings. Operating income for the quarter came to $116.1 million, compared with $141.3 million in the prior-year period, a result that partly reflects that progress—although the earlier figure contained $22 million tied to the legal settlement, the legal payment. The group's operating margin told a different story. It registered 25.5%. That is a solid figure, but it was 490 basis points below last year—and all of those 490 basis points stemmed from the legal settlement in 2025. In fact, margins were reasonably strong. Gross margin came in at 48.1%, which is 110 basis points above where it was a year ago, and our OI margin landed at 25.5% — pretty much in line with the 25.6% we posted last year once you adjust for the legal settlement, and we did that even with softer volume. RS&I's underlying strength is really showing up in the new electronic parts catalogs, our EPC, which the team in Richfield, Ohio put together. This software makes things run a lot more smoothly for dealership parts counters.

Nick Pinchuk

executive
#4

You know, a major challenge for the parts department is that a single vehicle component can have at least a dozen different names. You've got technician slang, OEM descriptions, part numbers, stock numbers, repair manual terminology—and the list goes on. Those rarely line up. So when a call comes in, how does the parts team translate the way a technician speaks into a barcode that's sitting on the shelf—into something that corresponds to what's actually in inventory? That's precisely where our edge lies—a real one. Leveraging our 3.4 billion proprietary repair records, we apply large language models to connect all of it. Whatever phrase or term is entered by a parts rep, they can locate the exact part and the exact SKU immediately, regardless of what name it goes by. Just as important, the system examines the proposed part and recommends associated items that should be swapped or fitted during the same job, so the repair is completed right the first time. In my view, that is a huge driver of efficiency, and it is fast becoming something shops cannot operate without, which positions RS&I as an essential element in helping dealerships succeed; our confidence in the RS&I business is strong, and our customers and industry partners share that view. That was evident when the Professional Tool & Equipment News, PTEN, revealed its prestigious 2026 Innovation Awards and People's Choice Awards. RS&I was strongly represented there, with winning products including our TRITON handheld diagnostic platform, our PRO-LINK heavy-duty diagnostic platform, the Manager SE inspections feature from Mitchell 1, and the adapter cart from Challenger. Every one of them was recognized as a winner by the techs who use these tools daily. In fact, taken together, the corporation earned 23 PTEN awards in total out of 54 eligible categories. We see that as real proof of our competitive advantage and our products throughout the corporation. RS&I continues to broaden its presence with owners and managers of repair shops, handling rising complexity, focusing on developing innovations that simplify difficult tasks, and assisting shops to prosper along the way. Next, the third quarter results. Tools Group. Sales fell short of our benchmark, impacted by heightened diesel volatility. Demand for Tech remained steady, with new products being introduced and the network sustained. C&I exceeded our quarter, proving resilient, with a 7.4% organic gain. Operating margin reached a fresh record of 18.5%, an increase of 290 basis points, as we make significant progress in launching our strong power tools and precision torque products, engineered to make work easier, along with a growing range of tailored solutions fueling growth across critical industries globally. RS&I gross margins improved by 110 basis points. Operating margin came in at 25.5%, offsetting the headwinds roughly on par with last year's level in spite of the turbulence. On a consolidated basis, reported sales were essentially unchanged. Gross margins rose a robust 51% and were up 10 basis points compared with a year ago, while the OI margin stood at 21%. Snap-on is steering through the diesel turbulence, remaining steady against the wind. At this point I'll hand the call over to Aldo. Aldo?

Aldo Pagliari

executive
#5

Appreciate that, Nick. Turning to slide seven, there's a summary of how our consolidated operating results shaped up for the third quarter. For the quarter, net sales reached $1,183.7 million, a figure that was down $7.1 million compared with 2025 levels. That reflected a 2.8% organic decline, partly offset by $25.6 million in sales from acquisitions. Heightened turbulence connected to the ongoing conflicts in the Middle East and Ukraine weighed on sales in our automotive repair markets — including the rapidly escalating price of diesel fuel during the quarter — and that led to lower sales to our Mobile Van network. Now regarding our Repair Systems & Information group, quarterly sales took a hit from major shifts in how new OEM vehicle platforms were rolled out. Continued stronger activity in the industrial-facing end markets of our Commercial & Industrial segment, or the C&I Group, helped soften those declines. Consolidated gross margin held steady at 51%, versus 50.9% in last year's third quarter. That 10 basis point gain mainly came from savings tied to the company's RCI initiatives, partly offset by increased material costs. Operating expenses came in at 30% of net sales, up from 27.5% a year ago. The main drivers were a 190 basis point non-recurring gain from a legal settlement in 2025, along with ongoing spending to support our brand and other business opportunities. Operating earnings before financial services reached $248.1 million for the quarter, versus $278.5 million in 2025, a figure that included a $22 million benefit from the legal settlement. Measured against net sales, operating margin before financial services was 21%, compared with the 23.4% reported last year, which reflected the 190 basis point benefit recorded in the third quarter of 2025. In the third quarter, financial services brought in $98.6 million, down from $101 million a year earlier, and operating earnings came to $68.3 million versus $68.9 million in 2025. Consolidated operating earnings reached $316.4 million, compared with $347.4 million last year, a figure that had the legal settlement benefit baked in. The operating earnings margin worked out to 24.7% of revenues, against 26.9% in 2025, which likewise reflected the legal item's benefit. For the third quarter, our effective income tax rate stood at 22.3% in 2026, versus 22.6% the prior year. Net income came in at $243 million, equal to $4.64 for each diluted share, versus $265.4 million, or $5.02 for each diluted share, in 2025 — a figure that had benefited from a $16.2 million, or $0.31 per share, after-tax gain tied to the legal settlement. If you set aside that $0.31 legal benefit, adjusted earnings per share for the third quarter of 2025 stood at $4.71. Moving now to how our segments performed this quarter, and beginning with the C&I Group on slide seven: sales reached $404.3 million, an increase of $36.6 million over 2025 levels, driven by a 7.4% organic improvement plus $10 million contributed by acquisitions. Revenue from customers in critical industries climbed by a mid-single-digit rate during the period, which included strong activity with the U.S. We saw ongoing strength in military, plus higher sales across general industry end markets. Specialty torque also delivered its second straight quarter of double-digit growth, and the high-precision electronically controlled bolting line put up a solid result. Asia Pacific also expanded this quarter, posting a high single-digit increase, as we made progress in cross-border business and in local markets alike. Overall, the C&I Group continues to advance, with gains in North America, Asia, and other emerging markets. Gross margin climbed 60 basis points to 41.5% this quarter, up from 40.9% a year earlier, driven mainly by higher sales and savings from the segment's RCI initiatives. For the quarter, operating expenses represented 23% of sales. That's a 230 basis point year-over-year improvement, driven primarily by higher sales volumes along with a 130 basis point gain from the building sale, partially offset by a 40 basis point drag from acquisitions. At the C&I Group, operating earnings hit $74.7 million, compared with $57.5 million in 2025, while the operating margin was 18.5%, which is 290 basis points above last year. Turning now to slide eight. Snap-on Tools Group sales totaled $471.5 million, down from $506 million a year ago — a 7% organic decline. Within the segment, that organic decrease consisted of a high single-digit drop in the U.S. and a low single-digit decline internationally. In our view, during the quarter, growing economic uncertainty along with steep increases in diesel fuel prices reduced franchisees' willingness to expand their purchasing, and that resulted in a reduction of van inventory as they sold down stock to generate cash. This quarter's gross margin came in at 46%, compared with 46.8% a year earlier. Lower sales volume was the primary driver of that 80 basis point decrease. A 60 basis point benefit from favorable foreign currency effects offset higher costs for materials. Operating expenses represented 28% of sales, up from 25.1% in 2025. The main reason for that rise is weaker sales, though it also reflects ongoing investment in the Snap-on brands. The Snap-on Tools Group posted operating earnings of $84.8 million, compared with $109.9 million in 2025. Operating margin came in at 18%, versus 21.7% a year earlier. Turning to the RS&I Group on slide nine, sales reached $454.7 million, down from $464.8 million the prior year — an organic drop of 5.5%, partially offset by $15.6 million of acquisition-related sales. The organic decline was driven primarily by softer sales to OEM dealerships, reflecting a significant pullback in program-related activity during the period, particularly among North American OEMs as they adjusted the rollouts of new vehicle launches. RS&I Group gross margin was 48.1%, an increase of 110 basis points over last year, largely due to favorable business mix. Operating expenses represented 22.6% of sales, compared with 16.6% in 2025, a figure that had benefited by 480 basis points from the legal settlement. The other 120 basis points of the year-over-year gain largely reflects weaker sales volume. Operating earnings were $116.1 million, down from $141.2 million a year earlier, and the prior-year number had a $22 million boost from the legal settlement. Operating margin stood at 25.5%, versus 30.4% reported in 2025. Excluding the 480 basis point benefit from the 2025 legal item, adjusted operating margin fell 10 basis points compared with last year. Turning to slide 10, financial services revenue was $98.6 million, a decline of $2.5 million from last year, primarily because interest income was lower as the average finance receivable portfolio shrank year over year during the period. Expenses in financial services came in at $30.3 million, compared with $32.2 million in 2025, and the main driver was a $2.3 million reduction in provisions for credit losses. As a result, operating earnings for financial services reached $68.3 million versus $68.9 million a year earlier. The average yield on finance receivables stood at 17.7% in the third quarter of both 2026 and 2025, while contract receivables averaged a 9.1% yield. Third-quarter loan originations totaled $270.6 million, a drop of $3.5 million, or 1.3%, relative to 2025. If you turn to slide 11, you'll see that our balance sheet at quarter end holds roughly $2.5 billion in gross financing receivables, of which $2.1 billion comes from the U.S. operation. When it comes to extended credit, or finance receivables, the U.S.

Aldo Pagliari

executive
#6

The 60-day plus delinquency rate came in at 2.1%, which is 10 basis points higher than what we saw in the third quarter of 2025. For the entire extended credit portfolio — $70.1 million — trailing 12-month net losses equaled 3.63% of outstandings at quarter end, a sequential decline from 3.7% in this year's second quarter. Given the current environment, we feel these portfolio performance metrics are still relatively balanced; let's move on to slide 12. Cash provided by operating activities during the quarter was $247.7 million versus $277.9 million a year ago. Net cash used by investing activities in the quarter totaled $18.3 million, which included $24.7 million of capital expenditures. Net cash used by financing activities came to $205.3 million, including $126.1 million in cash dividends plus the repurchase of 220,500 shares of common stock for $87.1 million under our existing share repurchase programs. At quarter end, we still have availability to buy back up to an additional $431.2 million of common stock under our existing authorizations. Moving to slide 13. Trade and other accounts receivable were $922.1 million, an increase of $40.7 million from 2025 year-end levels, with $12.2 million of that coming from acquisitions. Days sales outstanding stood at 68 days at the close of the third quarter, compared sequentially with 70 days at the end of the second quarter and 67 days at 2025 year-end. Inventories, which include $18.5 million from acquisitions, rose by $54.4 million from 2025 year-end. On a trailing 12-month basis, inventory turns were 2.3 x at period end versus 2.4 at the end of last year. Our cash position at quarter end was $1,670,000,000 compared with $1,624,500,000 million at the end of 2025. That wraps up my comments on our third quarter performance. I'll now go over a few outlook items for the rest of 2026. As a reminder, the fourth quarter of 2025 had an extra week of operating results tied to the company's fiscal calendar; in 2026, we go back to a 52-week fiscal year with 13 weeks in the fourth quarter. Although this additional week's impact was not material to Snap-on's consolidated fourth quarter 2025 total revenues or net earnings, our financial services segment did earn an additional full week of interest income from its financing portfolio. At the consolidated level, the net earnings benefit from the extra week of financial services interest income was largely offset by a corresponding additional week of fixed expenses, primarily personnel-related costs. We expect capital expenditures for the year will be roughly $100 million, and we currently anticipate our full year 2026 effective income tax rate will approximate 22%. I'll now turn the call back to Nick for his closing thoughts. Nick?

Nick Pinchuk

executive
#7

Okay, thank you, Aldo. So this was a Snap-on quarter defined by three big themes. First, diesel prices climbed at an accelerating pace during the period — a rise that seemed to have no ceiling — and franchisees responded to that unprecedented surge by trimming inventory, even though technician markets held steady. That shows up in the Tools Group numbers. Van sales fell 7%, even with volume off the franchise trucks holding flat. Second, our critical industries business kept growing, and we applied our edge in customized products to greater effect. That pattern came through clearly in C&I's encouraging results. Sales rose 10% as reported. Organic activity grew 7.4%. C&I volume reached a record high, and the group's OI margin was 18.5%, a 290 basis point increase — also a record. Once again this quarter, the C&I story showed us how strong and expanding the potential is in the critical industry sector, how our capacity to capture that opportunity keeps growing, and how skillfully our team extends the Snap-on brand outside the garage with solid profitability. Lastly, this quarter demonstrates that we can maintain robust margins even through significant and unusual headwinds. Our gross margins make all of that clear. They were strong in both absolute and relative terms. For the corporation, gross margin was 51%, a 10 basis point improvement despite the changing environment. Looking ahead, we believe there is still opportunity to move forward. The diesel surge appears to have leveled off, and both of our main markets — vehicle repair and critical industry — remain fundamentally solid. We are equipped to take advantage, leveraging our strengths in product, brand, and people. Those are advantages we continued to invest in through the turbulent period. Because of that, our product line keeps expanding, and the offerings genuinely make work quicker and simpler. Our brand is unmatched. It truly serves as the visible expression of the pride and dignity that working men and women bring to their trade. We hear that constantly. Our people are genuinely seasoned, proven in tough conditions, and dedicated to Snap-on's success. Looking ahead, we're confident that our markets—combined with obvious strengths in products, brand, and people—will let us weather the turbulence and return to the positive trajectory we've long enjoyed in the quarters and years to come. Before turning things over to the operator, I want to address our franchisees and associates directly. I know many of you are on the line, and the resilience we've shown during these especially difficult times comes in large part from your efforts. You have my deep respect for what you contribute to moving our company forward. And for the energy and skill you demonstrate daily, you have my admiration. I appreciate all of you for staying so committed to this team and what lies ahead. At this point, I'll hand things off to the operator. Operator?

Scott Stember

analyst
#8

Good morning, and thank you for taking my questions.

Nick Pinchuk

executive
#9

Morning, Scott.

Scott Stember

analyst
#10

I just want to dig a bit into the commentary on sales off the truck. When you say stable, does that mean roughly flat for the quarter? You also mentioned that the diesel wave appears to be flattening. Have you seen any reversal in orders during October?

Nick Pinchuk

executive
#11

First off, we don't provide guidance, so I won't say anything about October. What I will say is this: sales off the truck are up, though only slightly; still, they're positive. So that's where you're seeing all of this play out — the negative in the Tools Group and van sales that are sort of where they were; that's what we refer to as stable. If you mean flattening, all you need to do is check diesel prices. Diesel prices have leveled off. So I don't know where they're headed, but I believe our people have mentally adjusted to where diesel prices sit now. I don't know what they'll do about that going forward, because if prices remain at the current level, they'll still want some cash on hand to make things easier while they stay there. If it comes down, I don't know what will happen. It's tough to predict what they'll do with inventory, but it does create future potential at some point; the timing of that potential, though, isn't necessarily clear.

Scott Stember

analyst
#12

Understood. That's encouraging news regarding the van coming off. Could you give us a sense of what's actually moving? My guess is that the pattern of avoiding higher-priced items hasn't broken. Was there anything specific in particular off the van that stood out as a positive?

Nick Pinchuk

executive
#13

Yeah, look, I'd say power tools. When I say power tools, I mean because they seem to be on fire these days. They're really performing. We've got a solid product line, and we've had a series of — I sold a guy at the SFC who, something I didn't bring up, they had a long neck ratchet. He moved 115 of them, and I don't know how many customers he had, but that works out to roughly every other customer or so. Power tools are selling well. They performed well in the quarter. And these carts are doing okay, so like the carts I mentioned, which is sort of reaching up, turning them into semi-quick payback items, and they tend to be popular.

Scott Stember

analyst
#14

Okay, and one final question regarding RS&I. Beyond the OEM dealer orders, could you give us a sense of how a few of the other sub-segments performed?

Nick Pinchuk

executive
#15

Well, I believe we basically stated that anything tied to the OEM dealers didn't perform very well. The parts catalog business, which is connected to that, did fine, but by and large, that was the situation. There was a lot of mixed diagnostics, and it didn't have its strongest quarter. Nothing was launched this quarter. Mitchell1 performed excellently. You look at those sorts of things. So I think we mention in our notes that sales to the OEM dealerships declined, and perhaps to the independent shops was roughly flat in this situation, that's it.

Scott Stember

analyst
#16

Understood. That's everything from my side. Thanks.

Nick Pinchuk

executive
#17

All right, got it.

Bret Jordan

analyst
#18

Hey, good morning, guys.

Nick Pinchuk

executive
#19

Morning.

Bret Jordan

analyst
#20

Could you share what you're picking up? Oh, good morning. What are you hearing regarding franchisee health and sentiment? I guess the biggest publicly traded auto dealer reported yesterday and mentioned negative car counts in service. Beyond Diesel Laptops, are they worried that there's some softening at the absolute garage level?

Nick Pinchuk

executive
#21

Are you referring to our franchisees?

Bret Jordan

analyst
#22

Yeah.

Nick Pinchuk

executive
#23

No, I don’t believe that’s the case. Look, it’s hard to say. That’s not the impression they give. We recently met with a number of franchisees, and during the quarter we met with quite a few of them in the Northeast — franchisees, shop managers, and technicians. Then we just met with a number of franchisees from what we call the North Central region, around St. Louis. The first thing they brought up was diesel prices. After that, they went on at length about some of the power tools and some of the products we were removing. So that wasn’t the feeling I got. What I felt was exactly as I described. The underlying business was pretty good in repair. I do think, as I said — and you probably know this better than I do — that I’m not sure the dealerships are doing all that well, because their attention is always on new car sales. I don’t know. I’ve read a number of articles, and we sort of hear talk about that from my dealer friends, about the lack of new models making a difference. I do think — isn’t car sales down this year? Aren’t car sales down this year in the U.S.? A couple, 3%?

Bret Jordan

analyst
#24

Yeah. What they're seeing is pushback from customers about what the service costs. So I think you're seeing some reaction from customers to the high inflation we've had in labor and parts pricing. So you're seeing

Nick Pinchuk

executive
#25

You mean the dealerships?

Bret Jordan

analyst
#26

Yeah, it's less about the launch cycle and more about the service base.

Nick Pinchuk

executive
#27

But Bret, those dealership repair shops — whenever you walk in and get pricing, it feels like management is a descendant of Jesse James. People push back constantly, I think. Really. People have complained about it. The reason independent shops have held on so long, robustly against the dealerships, is that pricing drives everybody to independent shops once it is off of warranty. This is not new.

Bret Jordan

analyst
#28

I'm with you on that. Speaking of affordability, you mentioned you're extending quick payback. If we consider, say, the price of a tool in the same SKU, or is the new product offering kind of aimed at a lower selling price so it's more affordable? Or has there been any shift, I suppose, in pricing?

Nick Pinchuk

executive
#29

What I was getting at there — a solid illustration would be tool storage. You've got those large boxes. Those things are huge. There's plenty of sheet metal, and there are lots of features built in. They sell for, I'm not sure, five figures, things like that. We're doing a strong expansion. We're doing strong expansions on the cart side of that. Less sheet metal, less expensive; so more attainable. If folks need tool storage, they won't be spending an enormous sum. They can get a cart. Incidentally, the cart I mentioned holds 2 tons of tools. Or a ton of tools, rather, sorry, a ton of tools. So that's what I was getting at; we're extending the designs to come down somewhat in certain places, in categories where people would say, "Well, those are certainly big ticket." We're trying to land, maybe you could make the case, at middle ticket from that.

Bret Jordan

analyst
#30

Okay.

Nick Pinchuk

executive
#31

Sure.

Bret Jordan

analyst
#32

Sorry, just to finish off that first question, I suppose — do you have some internal metric for gauging how healthy a franchisee is, or how liquid they are, such as delinquencies on contract receivables? My assumption is there aren't any delinquencies, given that you acquired that.

Nick Pinchuk

executive
#33

Yeah, no, we track a range of different measures, though many of them are imprecise, since they aren't required to report everything on all of these items. Broadly speaking, I get my best sense from talking with them.

Bret Jordan

analyst
#34

Yeah.

Nick Pinchuk

executive
#35

Honestly, I've been feeling quite positive—I've been feeling quite positive about my conversations with them recently. The diesel situation aside, that is. I think that diesel situation rattled them. When you consider diesel, and you imagine yourself back in the third quarter, it appeared as though it was headed to the moon. This is what-

Bret Jordan

analyst
#36

When diesel costs more, does that mean they go to see their customer less often, or is it just—

Nick Pinchuk

executive
#37

No, I doubt that. I really doubt it. You might expect that could happen. Well, there are thousands of franchisees out there, so some probably are doing that, but I wouldn't call it a widespread phenomenon.

Bret Jordan

analyst
#38

Great, thanks — I appreciate that.

John Babcock

analyst
#39

Morning, and thanks for the questions. I have a quick follow-up to something asked earlier. In your view, are franchisees at inventory levels they're comfortable with now, or is there still some more that needs to come out? And have you begun changing production to reflect the pullback taking place this last quarter?

Nick Pinchuk

executive
#40

Well, we've already absorbed it. The way I see it — look, as far as the pullback goes, my expectation is they won't go further, though I could end up eating those words, who knows. When I examine this quarter's figures on the decline, though, that has left them fine for a while; so near-term, I doubt that will occur. I don't expect them to take that step. Franchisees, you see, are fond of inventory; having it on hand is something they appreciate, and the reason, John, is that it lets them act the moment opportunity strikes. When a customer walks in and says, "I'd really like a new tool storage box, and I want it in blue," and there's no blue one on hand, they'll place an order for it—but by the time that person comes back, his wife might have persuaded him to drop the idea, or he could have changed his mind. That's why they prefer to close the sale on the spot, which is why they favor having more inventory. I don't think they'd be happy with this level, necessarily. I'm not claiming they're deeply unhappy. They can manage without it, but it doesn't pack the same punch as when you've got a fairly robust inventory on the van and somewhere else, perhaps in a warehouse.

John Babcock

analyst
#41

Okay, thank you. Regarding the products specifically, did they reduce anything in a particular category? Was it the higher-priced items, the lower-priced items? Which area saw the bulk of the adjustment?

Nick Pinchuk

executive
#42

No, actually not.

John Babcock

analyst
#43

All right.

Nick Pinchuk

executive
#44

No, actually — it was fairly much right across the board.

John Babcock

analyst
#45

All right, understood. That’s useful. So just one final question before I hand it over. On material costs, you mentioned that this is somewhat of a headwind for the Tools Group. I was wondering whether you could give a bit more detail on that.

Nick Pinchuk

executive
#46

On material costs, I’d say it’s mainly tied to steel when we discuss material costs. Freight is part of it too—freight expenses when you’re shipping. But look, I believe our people have handled that. Although we include material costs in the discussion, really, if you look at gross margins, it doesn’t seem like we’re being hurt, I’d say. I think we’re keeping them under control. We have offsets, such as from rapid continuous improvement in other areas.

John Babcock

analyst
#47

Yeah. Understood. Thank you.

Nick Pinchuk

executive
#48

Sure.

David MacGregor

analyst
#49

Yeah. Morning, everybody. Morning, Nick.

Nick Pinchuk

executive
#50

Hey there, David.

David MacGregor

analyst
#51

Hi there. I'd like to begin by asking you about the SFC and whatever observations you might have on this year's SFC. It looks like there may have been more order cancellations than usual surrounding that event this year. I wonder if I could just get you started by having you speak to that.

Nick Pinchuk

executive
#52

Certainly. Look, the SFC in Washington is always weaker on a population basis. It's not the most popular one. If you head to Orlando, attendance is higher. That's just how it is. It's marginal, but so forth. I'm aware people hold differing opinions about it, but SFC orders weren't all that strong; they were already declining. People were backing off at the SFC. We emerged from it somewhat below what we might have anticipated, and that's what you're seeing there. Now, I'll say this: the franchisee — if you spoke with the franchisees and didn't examine the order figures, you might say, "Well, okay, everything's just fine." They were fairly upbeat; yet the numbers wound up deteriorating in that fashion. I think when we spoke with people afterward, which is the reason we went out and talked with them, the issue was diesel prices.

David MacGregor

analyst
#53

All right. So regarding SFC, it sounds like ticket response was sort of decent, but traffic declined. Then let's discuss the cancellations.

Nick Pinchuk

executive
#54

Yeah. I wouldn't call ticket response good. I'd say it was okay.

David MacGregor

analyst
#55

All right.

Nick Pinchuk

executive
#56

Still, it fell short of what we expect. I'd rather not call it a disappointment or anything of that sort, but the fact remains that it wasn't at the level we were hoping for.

David MacGregor

analyst
#57

Understood; so how did cancellation rates look after that?

Nick Pinchuk

executive
#58

Honestly, I don't believe they differ at all in this case. We aren't seeing elevated cancellations or anything like that.

David MacGregor

analyst
#59

Mm-hmm. Okay.

Nick Pinchuk

executive
#60

We began noticing this for. You never can tell. The third quarter is unpredictable. As you move through the months, an order pattern is never certain. But once you reach the SFC and find it isn't where you believe it ought to be, you begin to realize that, hmm, something is off.

David MacGregor

analyst
#61

Understood. What's the right way to think about attrition among franchisees in this environment? Do conditions like these push the marginal franchisee out into retirement? Or what's your read on it?

Nick Pinchuk

executive
#62

Yeah, that can happen, but as I mentioned, franchisees' van sales aren't down; they're fine. I don't think — I don't know, I'm not certain. I get that there's plenty of turbulence out there, and folks might say, "Oh, yeah, I want out," or, "I'm getting tired." For the most part, people retire at a certain age. That's usually what drives this, and it's typically the classes that drive much of it. Sure, like you said, marginal franchisees come under pressure, but many of those folks probably wouldn't have made it regardless. I don't believe we're seeing that. What causes the up and down, in my view, is the aging.

David MacGregor

analyst
#63

Understood. So then you mentioned that franchisees are growing considerably more wary. What does that mean for revolving account credit? Should we expect additional flips toward the end of the year, or what's your view on RA as a business?

Nick Pinchuk

executive
#64

Hold on, I never said that. I'm not certain. I don't believe I described franchisees as more wary. I don't think franchisees have grown more cautious. What I see is something quite specific: they looked at the diesel price and told themselves, "This is bad; it will cost me more. I don't want to quit. I'd still want to give my son the G.I. Joe with the kung fu grip, as they say, for Christmas, so I don't want to cut anything else. I'd rather ease off a bit right now and build myself a small cushion for what's ahead." Still, I think their mindset really isn't that poor. Nothing has shifted at the fundamental level, in my view. One point we're trying to get across here is that, fundamentally, hardly anything actually changes at Tools Group apart from the diesel price.

David MacGregor

analyst
#65

Understood. So my final question concerns capital allocation. That balance sheet is rather idle at present, given all that cash. How do you feel about putting it to work?

Nick Pinchuk

executive
#66

Well, I think, look, you know what our approach to capital allocation is. We're working capital intense, so you need it for that. Acquisitions appeal to us. Dividends appeal to us. It's in perpetuity, so we're going to be looking at what dividend we're going to. And we consider share buybacks. We consider them all.

David MacGregor

analyst
#67

Okay. Thanks very much, Nick.

Nick Pinchuk

executive
#68

Sure.

Quinn Fredrickson

analyst
#69

Hey, good morning.

Nick Pinchuk

executive
#70

Morning.

Quinn Fredrickson

analyst
#71

I'd like to ask about the operating margins in Tools Group. The decremental margin appeared quite steep there. Could you split out how much of that resulted purely from reduced volume versus the brand building and other cost items you referenced? If conditions remain somewhat difficult, would you anticipate pulling back on some of that investment, or do you view it as attractive enough to keep up?

Nick Pinchuk

executive
#72

Well, regarding Tools Group, several factors were at play. There's some product mix coming through. To put it another way, on gross margins, they saw stronger sales of power tools and torque as part of its sale to the vans. Quinn, on those products the margins are shared with C&I. So even though they're excellent at the corporate level, they're less strong for any individual division, and some of that came through. Gross margin included a volume piece, and OI included a volume piece as well. On the OI side, gross margins fell roughly 80 basis points, 60 basis points, around that range. Given the volume, that wasn't poor. You had volume and mix in there. The biggest item in it was OI margins. Volume was a factor, and we kept investing in areas such as training. You launch the product. One lesson we learned is that pivoting toward lower payback requires continuously launching plenty of new products, and the field has to be trained to handle them. Training has to be ramped up, and that adds to the cost. As for the SFC, even though I mentioned it came in somewhat lower, we did put money into it, and perhaps we could have cut back there. But we thought it through. Actually, I believe the figures were quite high for a Washington event. So we maintained that spending because brand building was our goal. When your offering is the premium item in the lineup, cutting spending on product development, brand building, and staffing strikes me as a rather dubious move. Accordingly, you shouldn't expect any retrenchment from us. At this moment, I don't see that happening.

Quinn Fredrickson

analyst
#73

Okay, thank you, Nick. For my second question, staying with RS&I, about the OEM dealerships.

Nick Pinchuk

executive
#74

Yes.

Quinn Fredrickson

analyst
#75

You talked about vehicle launch delays. Looking ahead, do you see anything in the program pipeline—maybe new year model launches—that makes you confident activity could pick up from here, or is visibility still pretty limited?

Nick Pinchuk

executive
#76

Visibility is somewhat limited, since I think the OEMs are still trying to work out what they want to do about this. Having worked at Ford myself in engineering and finance, a lot goes into getting one of these programs launched; we know about programs, but we don't know the timing of when they launch. That timing isn't something we're confident in, because there's a whole lot of variation. And beyond that, we don't know when they pull the trigger on the programs. It doesn't necessarily happen on the day of the timing. We have that in place. I think we'd expect some improvement, but I think we're in a flatter period for that business.

Quinn Fredrickson

analyst
#77

Got it. Thank you.

Nick Pinchuk

executive
#78

Sure.

Gary Prestopino

analyst
#79

Hi. Good morning, all. Hey, Nick.

Nick Pinchuk

executive
#80

Good Morning.

Gary Prestopino

analyst
#81

From your experience operating the company—setting aside what took place during the pandemic—has anything of this size ever hit you, such as an outside shock to the franchise channel that hurt those operators' buying capacity? And if so, how long was needed before things got back on track?

Nick Pinchuk

executive
#82

Nothing I've encountered has been this concentrated. Diesel costs have climbed before, yet during the third quarter they jumped 40%; that's rocket-ship speed. Honestly, Gary, much of this, in my view, wasn't down to them requiring the money. It was that these are fairly sharp small business operators, and they're telling themselves, "This diesel situation is spiraling." Incidentally, when you examine it, the third quarter is roughly when, in my view, America began to think, "Hold on, this Iran business appears to have no end in sight." I believe that sort of mindset around diesel reached them, and they figured, "Boy, I'd like some cushion." Purchasing isn't really the issue; rather, it's that they sought a cushion—they pulled back more inventory than was necessary to cover a single month of elevated diesel costs. My sense is that, when you speak with them, they're building a buffer against this continuing for some time.

Gary Prestopino

analyst
#83

All right. But here's what I'm really struggling to reconcile, and look, I'm not the sharpest person around, but shipment volumes held steady while revenue fell — which, I'd think, points to something like the mix of products, correct?

Nick Pinchuk

executive
#84

No. Hold on a second. No, hold on. Go on. Go ahead. Continue.

Gary Prestopino

analyst
#85

No, please, go ahead. If that point of mine is mistaken, then I'll just stop there.

Nick Pinchuk

executive
#86

No. Hold on, then. Allow me to try to lay it out. The reason sales fell is that they chose not to — broadly speaking, it's sort of a collective matter, and the word is, "I want to stay ahead of this diesel situation, so I'm not placing that big an order.

Gary Prestopino

analyst
#87

Okay.

Nick Pinchuk

executive
#88

They continued selling to the van driver, and they continued selling to the technicians as well. Sales into the technician segment rose a little compared with a year earlier. That's the key point: they cut back even though nothing urgent was happening in the technician market.

Gary Prestopino

analyst
#89

All right. So here's where I was going with that: fine, the technician segment looks solid. Franchisees cut back on their sales. Will they end up short on inventory as we head into this quarter? That's roughly what I was—

Nick Pinchuk

executive
#90

No, I really don't believe they'll come up short, though inventory gives you a certain flexibility regarding what you're able to sell. I can make a deal right now. Because when it comes to inventory, they carry a catalog, and they've got every sort of electronic item available to demonstrate the tools for customers, yet the stock sits there so they can serve that person immediately. You want this one? I place it right in your hand. So should you cut your inventory, you have a reduced ability to do that. How an individual franchisee is affected varies a good deal, and it shifts over time, depending on the circumstances that come up for them in the garage.

Gary Prestopino

analyst
#91

Okay. Thank you.

Nick Pinchuk

executive
#92

Sure.

Sara Verbsky

executive
#93

We appreciate everyone being here today. Shortly, a recording of this session can be accessed at snapon.com. As we always do, we value the interest you show in Snap-on. Have a good day.

Operator

operator
#94

That brings us to the end of this conference. We appreciate your joining today's presentation. You're welcome to disconnect at this time.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Snap-on Incorporated transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.

Get the API View API docs →

This call discussed

For developers and AI pipelines

Programmatic access to Snap-on Incorporated earnings transcripts and 132,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Snap-on Incorporated or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.