ACM Research, Inc. (ACMR) Earnings Call Transcript & Summary

November 5, 2026

NASDAQ US Information Technology Semiconductors and Semiconductor Equipment earnings 36 min

Earnings Call Speaker Segments

Steven Pelayo

executive
#1

Hello, everyone, and thanks for being with us to go over the third quarter 2026 results, which came out before the US market opened today. You can find the release on our website and through newswire services. We've also posted a supplemental slide deck in the Investor section of our site, and we'll be referring to it during our prepared remarks. Joining me on the call today are David Wang, our CEO; Mark McKechnie, our CFO; and Lisa Feng, who serves as CFO of our operating subsidiary, ACM Shanghai. Before we go further, please turn to slide 2. I'd like to remind you that what we say on this call may include predictions, estimates, and other information that could be viewed as forward-looking; these forward-looking statements reflect ACM's current judgment about the future. That said, they carry risks and uncertainties that might make actual results differ materially; those risks are laid out under Risk Factors and elsewhere in ACM's filings with the Securities and Exchange Commission. Please don't place undue reliance on these forward-looking statements, which represent ACM's opinions only as of today's date. ACM has no obligation to update you regarding any revisions to these forward-looking statements. Some of the financial results we discuss on this call will be on a non-GAAP basis, which excludes stock-based compensation and unrealized gains and losses on short-term investments, and starting in the second quarter of 2026, its impact to net income attributable to non-controlling interest. For our GAAP results and the reconciliations between GAAP and non-GAAP amounts, please refer to our earnings release, which is posted in the IR section of our website, and to slide 13. Also, unless otherwise noted, the figures below relate to third quarter 2026, and comparisons are against the third quarter 2025. I'll now hand the call over to David Wang. David?

David Wang

executive
#2

Thanks, Steven. Hello, everyone, and welcome to ACM's third quarter 2026 earnings conference call. We posted strong results for the September quarter, with revenue rising 37% and shipments climbing 31%. We credit that growth to: 1, share gains and product cycle; and 2, solid execution from our production and supply chain team. Our ECP and advanced packaging categories led the way. I'm particularly happy to see our cleaning categories return to growth. 1, we're picking up share through more cleaning steps and technology enhancements. 2, our Lingang mini-line has been helping our engineers replicate our customers' production environment and bring technology improvements to market far more quickly. And 3, broad uptake of our single-wafer SPM solution across multiple customers. We're making solid progress with our proprietary panel-level horizontal electroplating technology; in October, we announced shipment to an Asia customer of a 310 by 310 millimeter panel-level horizontal plating tool. We believe this is the first shipment of its kind anywhere in the world, and it genuinely represents a significant milestone in our commercialization efforts; it follows an earlier shipment of a larger 515 by 510 millimeter system to a mainland China customer. I'll share more detail on this later. Now I'll give an update on our backlog. As ACM Shanghai reported roughly a month ago, total backlog as of September 29th, 2026, stood at $2.5 billion, an 88% increase year-over-year. That backlog covers orders across every product category, with a heavier emphasis on our new products. Year-to-date orders through September 30 were up 147%, thanks to solid execution by our sales, production, and operation team. We still expect shipments to grow faster than revenue for 2026. We remain confident in our growth profile. For 2026, we see a healthy backdrop for China WFE as our customers continue to scale their production capacity; we expect an extra boost to our business from several product cycles, including SPM and furnace. Share gains combined with strong execution let us outgrow the China WFE market. We're optimistic that our newer platforms are providing another source of growth, as we expect Track, PECVD, and panel-level horizontal plating to move from the evaluation phase into the commercialization phase beginning next year. Now on to our third quarter results. Please turn to slide 3. Revenue came in at $368 million, up 37%. Shipments were $343 million, up 31%. Gross margin was 41.6%, and operating margin was 18%. We ended the quarter with gross cash of $1.3 billion and net cash of $0.9 billion. Now I'll give detail on products. Please turn to slide 4. Revenue from single-wafer cleaning, Tahoe, and semi-critical cleaning tools was $211 million, up 16%, and accounted for 57% of revenue. ACM has built one of the industry's broadest cleaning product portfolios, spanning a full range of critical cleaning and wet process steps. Our offerings span SAPS, TEBO, megasonic, Tahoe, backside cleaning, solvent cleaning, bevel cleaning, scrubber, wet etcher, plus our proprietary sulfuric peroxide mixing SPM technology. Semiconductor devices keep getting more complex, with extra process steps and tougher cleaning demands. We think ACM's broad lineup of differentiated technology leaves us well placed to seize those expanding opportunities; we remain fully dedicated to our long-term goal of 60% market share in China's cleaning equipment market. A key piece of that goal is our SPM product line. As a reminder, we estimate SPM tools account for roughly one-third of the two — of the overall cleaning equipment market, and our product cycle has only just started contributing. We recently launched an enhanced version of our 170°C single-wafer hot SPM system, which incorporates sulfuric acid recycling. That system reaches a 70% sulfuric acid recycle rate with reasonable particle performance; we expect this innovation to cut sulfuric acid consumption by approximately 400 tons per tool annually, bringing meaningful environmental and operating cost benefits. In October, at China International Industry Fair, ACM Shanghai received China International Industry Fair Innovation Achievements Awards for its single-wafer high-temperature SPM cleaning system. That marks one more award from a prestigious organization, further underscoring the innovation and technology capability of our SPM platform. I'm glad to reiterate today that we remain on track to ship more than 20 single-wafer SPM tools across multiple customers for the full year of 2026. Beyond SPM, we continue to expect — to expand the capability and application of our other differentiated cleaning technologies. Our Ultra C Tahoe now supports additional wet etcher and monitor wafer reclaim applications, giving customers greater process flexibility and widening the range of addressable applications, especially in reducing fine particles less than 19 nanometer. We are also gaining more traction with our supercritical CO2 cleaning technology. Our differentiated technology, with a much smaller CO2 chamber, cuts CO2 usage by 30% as compared with other market solutions. At the same time, we deliver better drying performance; that's a strong combination, and we're confident we can take share with this product line, and expand applications from DRAM to 3D NAND and logic applications. Revenue from ECP, furnace, and other technology grew 83% and represents 30% of total revenue. Growth — growth was driven primarily by strong momentum in both front-end wafer-level and back-end advanced packaging electroplating applications, with furnace contributing a relatively small portion. We see increased demand for electroplating in both logic and memory applications as semiconductor manufacturing and packaging become more complex. Our proprietary panel-level horizontal plating technology is a game-changer for the industry. We began development for panel-level plating more than 5 years ago, and the market is now coming to us. Our patented horizontal design enables highly uniform plating across the panel, including increasingly larger dimension substrate formats. Our 310 by 310 millimeter platform handles copper, nickel, tin-silver, and gold plating processes, integrates high-speed plating paddle technology, and accommodates tall copper pillars beyond 300 microns while maintaining solid within-die uniformity. We've engaged with several customers spanning various regions and panel size configurations; on top of that, we provide a comprehensive suite of wet processing tools for panel-level packaging, such as the Ultra C vacuum-P flux cleaning tool and the Ultra C bevel-P panel bevel etcher and clean tool. We're confident that ACM's differentiated technology puts us in position to deliver next-generation solutions, fueled by the increasingly complex 2.5D and 3D packaging roadmaps driving global AI. Shifting to our furnace business, we keep gaining ground in broadening customer adoption; we're building out our capabilities across key applications, including silicon nitride LPCVD, polysilicon LPCVD, oxidation, thermal ALD, and plasma-enhanced ALD, tackling opportunities in both memory and logic applications. We also offer high-temperature 1150°C and ultra-high-temperature 1250°C annealing furnaces, aimed particularly at IGBT applications. As these systems finish customer acceptance and move into production, we anticipate furnaces contributing more meaningfully to our revenue in 2027. Advanced packaging revenue, which leaves out ECP but counts service and spare parts, climbed 71% and made up 13% of the revenue mix. That covers coaters, developers, etchers, strippers, scrubbers, and vacuum cleaning tools, serving a wider array of advanced packaging applications. We're especially happy with our worldwide momentum here, with active deployments in Singapore and North America involving a range of these tools.

David Wang

executive
#3

We think our wide-ranging product lineup and growing customer ties around the world put us in a strong spot to seize more opportunity as we keep expanding this business. Now on our Track and PECVD platform, we've advanced on customer evaluation and the first deployment of our next-gen system. On Track, we stay focused on delivering industry-leading throughput and competitive process performance, going after the opportunity in KrF lithography, both for standalone systems and configurations integrated with lithography scanners. On PECVD, we believe our differentiated chamber architecture, electrostatic chuck design, and RF power source technology deliver key advantages in throughput and process performance; we're working closely with a key customer to show the performance and capability of both platforms. Looking forward, we anticipate additional shipment in 2027, with revenue contribution expected as customer qualification and production adoption move forward through 2027 and into 2028. Next, I'll give an update on global manufacturing and operation infrastructure. First, Lingang — please turn to slide 8. Our first Lingang building keeps running in volume production, and we're currently ramping our second building. Combined, the two buildings can support as much as $3 billion in annual output, giving us substantial capacity to scale the business over time. I'm glad to report that we expect shipment in the fourth quarter of 2026 to rise from third quarter levels. We also plan for solid shipment growth in 2027 and beyond. Next, our Oregon facility — please turn to slide 9. We're getting ready for the official opening of our Oregon operation very soon. That's an important milestone for supporting customers outside mainland China. The facility includes a Class 100 cleaning room for product demonstration and customer evaluation, plus cleanroom space for storage, pre-assembly, manufacturing, and technical support capability. We believe a US-based demo lab and production facility will support our effort to scale the global business; in addition, we keep strengthening operations across Asia; in Korea, we're expanding ACM Korea's capability, including manufacturing, engineering, and technical support resources to serve our growing international customer base; in Singapore, we're adding local resources to support customer installation, service, and ongoing technical engagement. Our global business keeps gaining momentum. As we discussed last quarter, we expect more than 20 tools installed at customer sites outside mainland China by year-end — by year-end 2026 — representing approximately 10 customers across 5 countries; we're especially encouraged by our progress in North America, Singapore, and other parts of Asia, where our global sales and service team is expanding customer relationships and supporting deployment across a growing range of products and applications; this engagement is helping us build a stronger foundation for future business, as customers gain experience with our technology and evaluate opportunity for broader adoption. The progress we're making demonstrates the competitiveness of our technology and positions ACM for meaningful long-term growth outside mainland China; now I'll provide our outlook for the full year 2026. Please turn to slide 10. Thanks to solid execution from our sales and operations team, a substantial backlog, and a number of major product cycles, we're lifting our guidance as follows: For 2026, revenue is now projected at $1.24 billion to $1.28 billion, which represents growth of 38% to 42% year-over-year. That's compared with the prior range we gave of $1.125 billion to $1.175 billion. Full-year shipment growth, we still expect, will exceed revenue growth. Our expanding differentiated product portfolio, global infrastructure, and customer relationships around the world, we believe, put ACM in position to seize new market opportunity and move closer to our long-term revenue target of $4 billion; with that, I'll hand the call to Mark so he can walk through our financial results in more detail.

Mark McKechnie

executive
#4

Thanks, David, and hello everyone. If you’d go to slide 11, please. Except where I say otherwise, I’ll be talking about non-GAAP financial measures, and those leave out stock-based compensation as well as unrealized gain/loss on short-term investments. You can find a reconciliation of those non-GAAP measures to the comparable GAAP measures in our earnings release. And unless I mention otherwise, the figures that follow are for the third quarter of 2026, with comparisons against the third quarter of 2025; we’ll go through the financial highlights now. Revenue came in at $367.7 million, an increase of 36.6%. Single-wafer cleaning, Tahoe, and semi-critical cleaning revenue was $210.7 million, up 16.1%, and accounted for 57.3% of sales. Revenue from ECP, front-end packaging, furnace and other technologies came in at $109.5 million, an increase of 82.9%, and accounted for 29.8% of sales. Advanced packaging revenue — leaving out ECP, services and spares — totaled $47.5 million, up 71.2%, and represented 12.9% of sales. Shipments overall hit $343.5 million, a rise of 30.6%. Looking at 2026, we still expect shipments to grow faster than revenue. Gross margin stood at 41.6% compared with 42.1%. That figure came in somewhat below our long-term target model, driven in part by product mix, foreign exchange, and the inventory provision taken during the quarter. Our long-term target range remains 42% to 48%, and quarter-to-quarter fluctuations can result from product mix; in the fourth quarter, we anticipate a modest gross margin improvement over the third quarter level. Operating expenses totaled $86.7 million, a 12.7% increase. R&D represented 12.8% of sales, sales and marketing 6.7%, and G&A 4.0%. For 2026, we plan R&D in the 15% to 17% range, sales and marketing in the 7% to 8% range, and G&A around 5%. Operating income was $66.2 million versus $36.5 million. Operating margin was 18.0% compared with 13.6%. Our income tax expense came to $1.9 million, compared with $2.7 million. For 2026, we're anticipating an effective tax rate around 10%. Net income attributable to ACM Research reached $40.5 million, up from $28.4 million. Non-GAAP net income left out $10.7 million of stock-based compensation expense and the unrealized loss on short-term investments, along with the related effect on non-controlling interest. Diluted net income per share was 55 cents, versus 41 cents. Turning to the balance sheet and cash flow, cash, cash equivalents, restricted cash, and time deposits totaled $1.28 billion as of the close of the third quarter. Net cash, which strips out short-term and long-term debt, amounted to $0.9 billion. Net inventory overall came to $851.2 million, broken down as $465.5 million in raw materials net, $122.7 million in work-in-progress net, and $263.1 million in finished goods net. The bulk of this is first tools sitting at customer sites for evaluation, plus finished goods held at ACM's facilities. Operations consumed $70.4 million in cash. Capital expenditures totaled $25.2 million. Looking ahead to full year 2026, our expectation for capex remains roughly $175 million. That concludes our prepared remarks; we'll now take any questions you might have. Operator, please go ahead.

Suji Desilva

analyst
#5

Hey David, hey Mark, and Lisa — congrats on how far things have come. Really impressive.

Mark McKechnie

executive
#6

Good

Suji Desilva

analyst
#7

job.

Mark McKechnie

executive
#8

Thanks, Suji.

Suji Desilva

analyst
#9

Those new products look like they're growing well. A year or two from now, what share of the mix do you figure they'll make up compared with today? I ask because I believe that will help fuel part of the margin upside for you folks. Oh

Mark McKechnie

executive
#10

David, you're on mute. Hey David, I believe your line is muted. Yeah.

David Wang

executive
#11

Hold on just a moment while I pull it up.

Mark McKechnie

executive
#12

There we are. David, we’re able to hear you at this point. David, you’re coming through for us now.

David Wang

executive
#13

Sure. Okay. Actually, you mean the new product, right?

Mark McKechnie

executive
#14

Our

David Wang

executive
#15

Track, PECVD, right, and horizontal electroplating. Yes, I believe that, well, once more, right, this new offering is going to, will truly put the emphasis on differential technology. When they launch, and will also, we're thinking, will be the healthy margin for what we sell. Particularly this horizontal electroplating, right, earned a good, good, good recognition from the customer. Also our Track system is beginning to reach their pre-production stage together with scanner. PECVD has made progress as well, too. As this new product joins, everything including furnace, too, right, joining into our revenue stream, and we think we're still going to give us maintain and even some product increase our gross margin.

Mark McKechnie

executive
#16

Hi Suji, I can take that one. Regarding next year's mix for the new products — one point is in the backlog, and I believe David noted that the mix leaned somewhat toward a few of our newer products.

David Wang

executive
#17

Right.

Mark McKechnie

executive
#18

We have plenty lined up around new products for next year that they will add to — some beginning with shipments, and after that moving to revenue. Our SPM product cycle is only now beginning to gain real traction. On furnace, I think we have quite a few tools currently being evaluated, so that piece is quite small, and we anticipate it gaining solid momentum next year; then naturally Track, PECVD, along with these panel level plating tools remain at a really early stage, so there is substantial growth potential across all of them beginning next year.

Suji Desilva

analyst
#19

No, that sounds great. Then on the same question regarding mix and how that trends next year as well for global customers versus China customers, because it seems both are growing, but it seems like you're landing in more regions and geographies globally, I'm curious how the global customer mix increases over the next year too.

David Wang

executive
#20

Actually, we see more international customer interest in our technology, right? This year we have more advanced packaging tools installed in the Singapore region; we also have other customer interest in our technology in the US, in Korea, and also in the Taiwan region. Okay, so we're also seeing customers over in Europe. By the close of this year, we'll have 20 tools installed in that region outside mainland China. I'd expect next year to bring considerably stronger results for us with global customers, right.

Mark McKechnie

executive
#21

Hi Suji — one more point I'd like to make: naturally, as we always do, we'll provide our guidance in January of next year. Reaching 10% of our revenue from global customers at these levels means $120 million plus. We aren't quite prepared yet to discuss the mix that will get there. The challenge, I suppose, is that our China business, along with our product cycles, is expanding quite rapidly, but we anticipate the global customers to genuinely increase in revenue this year, and of course next year, and for many years ahead as we scale that up.

Suji Desilva

analyst
#22

I also get that China is getting stronger. One last quick question about the supply chain — are you folks running into any constraints? And what's the timeline for Lingang's second building to be up and running? How long do you figure that will take?

David Wang

executive
#23

The second building, I believe, has already had its decoration completed, and we've begun moving people in and started using it right now. With that, once the second building is put into manufacturing, our space nearly doubles, right? Of course, we're going to bring on more people, train the technicians and workers, and truly get double the capacity. Next one is really — I want to say this supply chain constraint, right? Probably everyone has the same problem, and that's because the increase in the tool came too fast. We're still doing very well, and working with our vendor suppliers. Basically, we give them a 6-month, and even longer, 1-year forecast. That will give those primary — I want to say their suppliers a forecast, we want them to increase the capacity. Some people, some can do it, maybe some can't, some cannot meet our requirement. Therefore, we've been looking for a second source, a third source, to meet those requirements of ours. Our team, with this, is working very well, and again, it's a lot of challenging, and our team has made a lot of progress on this supply chain management and control.

Mark McKechnie

executive
#24

Suji, David, if you’ll allow me, I’d like to add a couple of points. Our supply chain group is truly essential, correct? Over recent years, they’ve been instrumental in helping us generate growth. We’ve encountered some unusual market circumstances. In this situation, ACM won’t be the party that causes delays for our customers, right? David made that quite clear. Q3 shipments came in fairly strong; we anticipate Q4 shipments will be even greater, correct? If you look back at certain prior years, frequently you see a Q4 that’s flat to down. I believe the team’s execution — this Lingang facility arrives at precisely the right moment; we tapped our cash, our balance sheet to expand raw materials during this quarter, we used a modest amount of cash, but I think doing so was correct in order to scale up production.

Suji Desilva

analyst
#25

Got it. Appreciate that — I'll make sure the team hears about it. Congratulations once more, everyone. Right.

Mark McKechnie

executive
#26

Thank you, Suji. Yes.

David Wang

executive
#27

Thanks, Suji.

Bintuo Ni

analyst
#28

All right, thank you, David and Mark. Appreciate you having me on. My first question is about how volatile our gross margin was. It's now back at 41% for the quarter. You brought up product mix as well as the inventory provisions. Could you tell me more regarding those inventory provisions, and is that also taking place in the fourth quarter too?

Mark McKechnie

executive
#29

I'll address that, and then I'll sort of cover that point, and then I'll have David speak a bit about what our strategies are here. As for the inventory provision, it wasn't especially elevated here in the third quarter; during the second half of last year, we ran into some challenges there, but this time around it was sort of in a normal range. We believe we have that under control, so it will be at kind of comparable levels next quarter and even each quarter next year, that provision. The larger effect really came, I think, from the product mix and even foreign exchange during the quarter. David, perhaps you'd like to comment on how we concentrate on world-class products, right? Sort of the longer-term strategy for our gross margins.

David Wang

executive
#30

Yeah. I’d say when you look at the true gross margin over the long run — and really, we depend on our differentiated products, right? Across everything we do in cleaning, copper plating, and even furnace as well, plus PECVD, which we’re developing, and Track too — all of it rests on our differentiated technology. Our products, in the market, even in China, sell a lot, and we don’t see anyone able to copy our differentiated technology, given all the patent protection and trade secret protection we have. With our products, if we succeed and become number one in performance, succeeding among the top tier of global players, that product would really carry a good margin in the China market. If anybody — as I said — cannot copy the ACM tool, right, even if some similar offering comes out from the top tier guys’ tools, their performance is still below ours; that’s our confidence that we can maintain long-term and gross margin in the market in China. Of course, those differentiated, patent-protected technologies can also sell outside mainland China, and pricing outside mainland China is good as well, too. So for that long run consideration, we have confidence we can maintain our gross margin in the 42% to 48%.

Bintuo Ni

analyst
#31

That's great, thank you. My second question concerns orders. If I'm hearing it right, you saw 147% order growth in 9 month '26. I believe your first half order growth came in at 100%, and the third quarter was very strong. How much of that comes from volume, and how much comes from share gains? Thank you.

David Wang

executive
#32

Mark, do you want to take that?

Mark McKechnie

executive
#33

Allow me to address that point, and then David, I believe I can assist you with it. The Chinese market overall has been quite strong, correct? In our view, it is still rather early in terms of investment in China. With shipments expanding 30% and orders growing at the pace we're seeing, we believe our growth outpaces the market considerably — across orders, revenue, and shipments alike. I'm not sure how to separate that out between the overall market and the China WFE market, but our objective is always to outgrow the China WFE market.

David Wang

executive
#34

Yes. I'd like to note that the China market remains, I'd say, at a stage of growth. Many logic fabs as well as memory fabs keep expanding their capacity. In addition, I'd say demand and orders from data centers, automobiles, and robotics will keep fueling growth in the China market. Also, I'd say the build's pace and space probably take about 2 years, a few years, relative to growth outside, right, in terms of technology as well. We observe that even the peak reached so far — people mention a global peak perhaps in 2028, or a peak in 2029. Our view is that China's peak will trail that by a year or 2 years. That gives us genuinely strong confidence in long-run revenue, your coming 5 years, for the China WFE market.

Bintuo Ni

analyst
#35

Excellent. Thank you so much, and well done on the strong progress recently. Thanks, everyone.

Mark McKechnie

executive
#36

Wonderful. Thank you, sir. Yes. Thanks to you.

Steven Pelayo

executive
#37

Thank you all. Before we wrap up, I'd like to briefly remind everyone about the investor conferences we have coming up. On November 18th, we'll be taking part in the 15th Annual Roth Technology Conference, held at the Hard Rock Hotel in New York City. Then on November 19th, we'll be participating in the Daiwa Miami Corporate Day at the Mondrian South Beach in Miami. On December 2nd and 3rd, we'll be presenting at the UBS Global Technology and AI Conference in Scottsdale, Arizona. And on December 15th, we'll present at the 15th Annual New York City Summit at Mastro's in New York City. Attending these conferences is by invitation only; if you're an interested investor, please reach out to your respective sales representatives to register and to arrange one-on-one meetings with the management team. That brings our call to a close, and you may disconnect at this time. Take care.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete ACM Research, Inc. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.

Get the API View API docs →

This call discussed

For developers and AI pipelines

Programmatic access to ACM Research, Inc. earnings transcripts and 132,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in ACM Research, Inc. or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.