Cummins Inc. (CMI) Earnings Call Transcript & Summary
May 4, 2021
Earnings Call Speaker Segments
Jack Kienzler
executiveThanks. Morning, everybody, and I appreciate you joining today's call as we go over Cummins' numbers for Q1 of 2021. With me on the line are Tom Linebarger, our Chairman and Chief Executive Officer; Jennifer Rumsey, our President and Chief Operating Officer; and Mark Smith, our Chief Financial Officer. Once the teleconference wraps up, all of us will take your questions. One quick note before we dive in: a portion of what you hear or receive today falls under forward-looking statements as defined by the Securities Exchange Act of 1934. Those statements convey our forecasts, expectations, hopes, beliefs and intentions concerning future strategies. A variety of risks and uncertainties could cause what actually happens down the road to differ materially from what such forward-looking statements project. You can find additional details about those risks and uncertainties in the forward-looking disclosure statement included in the slide deck, as well as in our filings with the Securities and Exchange Commission — in particular, the Risk Factors section of our most recently filed annual report on Form 10-K, along with any quarterly reports on Form 10-Q filed afterward. On this call, we'll also touch on certain non-GAAP financial measures, and the reconciliation of those measures to GAAP financial measures is available on our website. You can find our press release, which includes a copy of the financial statements, plus a copy of today's webcast presentation, on our website at www.cummins.com under the Investors and Media heading; with that taken care of, let's get started with our Chairman and CEO, Tom Linebarger.
N. Linebarger
executiveThanks, Jack, and good morning to all of you. I'll begin by summarizing the financial results from our first quarter, after which I'll cover sales and end market trends on a regional basis, and close with a look at what we expect for 2021. Following that, Mark will walk you through additional specifics regarding both the first quarter's financial performance and this year's forecast. During the first quarter, demand picked up speed as the worldwide economy kept getting better, which produced robust sales increases across the majority of our businesses and regions and delivered healthy profitability. Demand's comeback came in stronger and broader than we'd expected at the outset, which is why our full-year guidance now sits higher. One thing that stood out to us in the first quarter was how much the Components segment grew — it's clearly benefiting from the larger amount of content we're able to deliver to customers and partners as they deal with tougher, more intricate emissions rules in China and India. On top of that, this segment is helped by the leading position it holds worldwide now that truck markets are recovering. Although robust demand throughout our end markets produced strong revenues, the speed of the recovery has put pressure on worldwide supply chains, resulting in higher costs and major difficulties when it comes to filling all of our customers' orders. A lack of critical components, including semiconductor chips, has been the number one obstacle, with poor weather conditions, worker shortages in certain regions and congestion in global logistics adding further to order backlogs. Our key focus right now is our ability to supply, and we are taking every possible step to lessen the impact. I want to thank all of our team members worldwide, especially the people in supply chain and manufacturing operations, along with our committed suppliers, for the outstanding work they've done to handle these challenges and take care of our customers. We're optimistic that things will improve in the back half of the year. Even so, we expect demand to remain robust, and that will make it difficult for supply chain to keep pace, unless the industry extends the order cycle. Prior to discussing our first quarter financial results, I'd like to quickly highlight a few key strategic partnerships that we announced during the first quarter. The fresh and broadened alliances we've formed fit squarely with our approach of deepening ties to important clients in the segments where we already compete, while also directing money toward novel and substitute energy technologies. Cummins holds the position of the leading independent supplier of power solutions worldwide, and we are committed to ensuring customers receive the right answer no matter where or when they do business — offering a broad spectrum of options that includes sophisticated diesel, natural gas with near-zero emissions, all-electric, hydrogen, and additional technologies. This past February, we introduced a worldwide strategic collaboration covering medium-duty engine systems alongside Daimler Truck and Bus. Through that arrangement, Cummins is going to direct funding toward advancing development and manufacturing medium-duty engines and components on a global scale on behalf of Daimler Trucks and Buses. This partnership extends the solid relationship we already have with Daimler's brands in North America. Over there, ahead of the CARB rules in 2024 and the EPA rules in 2027, Daimler is going to swap out its vertically integrated engines for Cummins engines. On top of that, Cummins engines are going to be put into Daimler medium-duty chassis over in Europe, Brazil and India, which lines up with next-generation emissions regulations in those areas. Down the road, Cummins will supply global medium-duty engine systems for Daimler Trucks and Buses everywhere in the world. We shared news about a worldwide medium-duty alliance and a sophisticated engineering teamwork effort involving Isuzu, expanding upon the power collaboration between Isuzu and Cummins that started in 2019. Trucks from Isuzu powered by Cummins B6.7 diesel platform engines will first launch in North America during 2021, followed by Japan, Southeast Asia, and additional areas at subsequent timeframes. Finally, during March, we revealed a medium-duty engine arrangement with Hino, in which Cummins 6.7 and L9 engines will be made available on Hino trucks across North America before this year concludes. In addition to what we've already shared, we continue to explore opportunities for strategic partnerships with global OEMs spanning multiple regions, technologies, and power solutions. We believe these tie-ups will allow us to substantially expand our core Engine and Components operations while also deepening the key relationships we hold with various OEMs and end users. Taken together with our application know-how and our extensive sales and service network, those relationships position us well to manage the shift away from internal combustion engines toward lower carbon hybrids and, in time, to zero-emissions offerings. I'll now share my thoughts on how the company performed overall during Q1 of '21. We'll review several of our major markets, starting with North America, then move to the biggest ones outside the U.S. In the first quarter of 2021, revenue reached $6.1 billion, up 22% from the same period in 2020. EBITDA totaled $980 million, a 16.1% margin, versus $846 million, or 16.9%, the prior year. The rise in EBITDA dollars reflected better sales and all-time-high joint venture income, though that was partly offset by much greater premium freight and other expenses related to supply chain disruptions, along with increased variable compensation costs. On the profitability side, and this is particularly true for our Engine business, the impact from supply chain problems was larger than we had anticipated. That happened because of the extreme steps we took in order to fulfill what we had committed to customers. In North America, first quarter revenues came in at $3.3 billion, which is 7% higher, and the reason was stronger industry build rates for heavy-duty trucks as well as light-duty pickups. For heavy-duty trucks, industry production reached 60,000 units during the first quarter, up 15% compared with 2020 levels, and our heavy-duty unit sales totaled 23,000, which represents a 25% gain over 2020. When it comes to medium-duty trucks, industry production stood at 32,000 units in the first quarter of 2021, a 2% rise over 2020, and our unit sales were 27,000 units, up 5% from 2020. In Q1 of 2021, Stellantis received 42,000 engines from us for its Ram pickups — a 49% jump compared with 2020. Revenue from power generation increased 10%, lifted by healthier demand in the recreational vehicle and data center segments. Compared with the prior-year period, our international revenues were 45% higher in the first quarter of 2021. In China, Q1 revenues, joint ventures included, totaled $2.1 billion, which represents a 95% gain on stronger sales in on-highway and construction markets. Demand from the industry in China for medium- and heavy-duty trucks hit 587,000 units, an increase of 95%, driven by an NS V prebuy before a wider NS VI rollout in July of this year as well as efforts to secure inventory amid supply chain concerns. Altogether, we moved 91,000 units, joint ventures included — that's up 146%. In China, light-duty demand climbed 73% versus 2020, reaching 581,000 units, and our own sales there, counting joint ventures, came to 45,000 units, a 63% gain. Excavator demand across the industry hit yet another quarterly high in Q1 at 127,000 units, 84% above the prior year. We sold 21,800 of those units, a 107% jump, as the customers we serve kept picking up share.
N. Linebarger
executiveDuring the first quarter, demand for power generation equipment in China rose 41%, fueled by expansion in data center markets and greater need for standby power. In India, first quarter revenues, which include joint ventures, came to $577 million — that's an 82% gain over the first quarter a year ago. Industry truck production climbed 63%, and our shipments were up 88%, thanks to improved penetration with our JV partner as the heavy-duty commercial vehicle segment bounced back from a year ago. Demand for power generation and construction equipment saw a strong rebound in the first quarter as economic activity kept improving. In Brazil, our revenues grew 31%, driven by higher demand across most end markets. Now let me give our outlook for 2021, along with some remarks on our individual regions and end markets. We've lifted our forecast for total company revenues for 2021 to be up 20% to 24%, versus our prior guidance of up 10% at the midpoint; this guidance reflects a stronger outlook across most markets and regions. For industry production of heavy-duty trucks in North America, we've raised our forecast to 264,000 units, up 45% compared to 2020 and above our prior guidance of 255,000 units. Even with the supply chain constraints our industry is facing, demand has kept outpacing what we expected at the beginning of the year. In the medium-duty truck market, we're raising our forecast for industry production to 140,000 units, up 35% year-over-year and above our prior guidance of 125,000 units; for our engine shipments for pickup trucks in North America, we expect an increase of 15% compared to 2020, which is 10% higher than our expectations 3 months ago; in China, we still expect domestic on-highway demand to fall from record levels a year ago despite the strong start to the year. That said, we're raising our outlook for medium- and heavy-duty truck market demand to 1.5 million units, compared to our expectations of 1.3 million units at the beginning of the year. That would still amount to a 15% decline from 2020. In the light-duty truck market, we still expect a 7% reduction in demand, in line with our previous guidance. We now expect industry sales of excavators to fall 10% from the record levels achieved in 2020; this compares to our prior guidance of down 20%. In India, we still project broad recovery versus 2020. We anticipate industry demand for trucks to be up 90% compared to levels experienced in 2020, and our other businesses are showing promising growth due to continued infrastructure investment; we do anticipate lower demand in all end markets in the second quarter due to new lockdowns as a result of an increase in COVID-19 cases and are monitoring the events on the ground closely. Given the rapid increase in COVID cases in India, we are very concerned about the health and safety of our employees and those of our suppliers and partners. Our factories are all still running, though we've put strong safety protocols in place. For Brazil, our projection remains that truck output will rise 25% during 2021. Demand for mining engines is now anticipated to grow 45% in 2021, which is up from the 15% we were expecting 3 months ago. That shift comes from sustained strength in commodity prices. First-quarter demand for power generation equipment rose 18%, and we keep seeing solid order activity across most geographies and segments. Our new expectation is that global power generation revenues will climb 15%, versus the roughly 5% we forecast previously, mainly because of data center and recreational vehicle markets. To sum up, we're raising this year's revenue outlook, with growth compared to last year anticipated across most major regions, China excluded. Chinese demand stayed very strong during the first quarter, yet we do expect a softer second half, partly because of the shift to the new National Standard VI emissions regulations for trucks that starts in July; we're lifting our EBITDA guidance range to 15.5% to 16%, from 15% to 15.5% at the start of the year, thanks to stronger volumes and a better outlook for JV income, which we believe will more than offset much higher supply chain costs. In the quarter, we gave back $615 million to shareholders through dividends and share repurchases, in line with our plan to return 75% of operating cash flow to shareholders this year. At every one of our facilities, we keep taking the precautions needed to limit COVID-19's spread, and the health and safety of our employees stays our priority. We're hopeful that vaccination distribution continuing around the world will lessen the virus's impact during the second half of the year, yet a rise in cases somewhere globally remains a risk that might bring lower customer demand, further facility shutdowns or added supply chain constraints down the road. Having navigated an extremely difficult 2020 and a dramatic first-quarter 2021 ramp-up, Cummins stands in a strong position. We've locked in some significant new business wins within our Engine and Components businesses. Simultaneously, we keep investing in future growth, delivering new technologies to customers and producing strong returns for shareholders. Thanks for spending time with us today. I'll now hand things over to Mark.
Mark Smith
executiveThank you, Tom, and good morning to all of you. Our first quarter results come down to 4 main points. To begin with, demand kept bouncing back across the majority of our key end markets and geographies, which gave us record revenues for Q1 and a far brighter picture for the whole year. Next, the high level of demand throughout our markets has put pressure on global supply chains within our industry, which pushed premium freight costs and other related inefficiencies above what we had projected when the year began. Given how strong demand is, along with order backlogs and the absence of inventory in the pipeline, it looks like some degree of these higher costs will persist over the next several quarters. Even with these cost headwinds tied to a constrained supply chain, we still posted solid profitability and cash flows during the first quarter, and we have lifted our full year outlook considerably. Last of all, we gave back $615 million to shareholders via cash dividends and share repurchases, which aligns with our intention to return 75% of operating cash flow to shareholders during this year. Let me now walk through the first quarter in greater depth. Q1 revenues came in at $6.1 billion, which is 22% higher than the prior year. North American sales were up 7%, while international revenues climbed 45%. Currency fluctuations gave revenues a positive lift of roughly 1%. Earnings before interest, taxes, depreciation and amortization, or EBITDA, reached $980 million, equal to 16.1% of sales for the quarter, versus $846 million, or 16.9% of sales, during the same period last year. EBITDA dollars rose thanks to the gains from higher volumes and better earnings out of joint ventures in China. The EBITDA percentage fell mainly because of a lower gross margin percent. Gross margin came to $1.5 billion, or 24.4% of sales, which was up $192 million but dropped 140 basis points as a percentage of sales. Gross margins in Q1 absorbed roughly $105 million in extra freight, labor and logistics costs tied to disruptions throughout our supply chain. We anticipate these higher costs will last at least into the second quarter, and we have built additional costs into our full year guidance. Partly offsetting these supply chain inefficiencies was a $44 million favorable change in estimate for our product coverage expense, which reflected reduced costs across a number of products, mainly within our Components and Power Systems businesses. Selling, general and administrative expenses rose by $28 million, and our research expenses went up by $22 million, with both increases driven mainly by greater variable compensation expense. During 2020, our variable compensation plan was structured to flex downward because of the weaker outlook stemming from the global pandemic's impact; and in 2021, variable compensation expenses should be higher for the company and every individual segment, in line with our forecast of better full year profitability this year. Joint venture income hit a record $166 million in the first quarter, rising from $129 million a year earlier. Persistent, robust appetite for trucks and construction machinery in China drove the solid results; keep in mind that joint venture income during last year's first quarter contained a $37 million gain tied to modifications in Indian tax law, plus $18 million of income from a technical fee, likewise in India, neither of which recurred this year. Once you strip out those nonrecurring items from 2020, the earnings growth achieved by our joint ventures in the first quarter looks even more impressive. Other income fell $46 million versus the prior year, largely because of $32 million in mark-to-market losses on the investments supporting our nonqualified benefit plans, against a $17 million mark-to-market gain in last year's first quarter. Those mark-to-market losses sat within eliminations and were not assigned to our operating segments. Net earnings came to $603 million, or $4.07 per diluted share, versus $511 million, or $3.41, a year earlier. That gain stems mainly from stronger after-tax earnings and a reduced share count stemming from share repurchase activity. The effective tax rate for the quarter stood at 22%. Operating cash flow during the quarter was an inflow of $339 million, versus $379 million a year earlier. Increased working capital tied to this year's revenue growth more than offset the stronger earnings. I'll turn now to segment results and our updated guidance for 2021. In the Engine segment, first quarter revenues rose 14% over last year, fueled by expanding demand for trucks in the U.S. and construction equipment in China. EBITDA declined from 16.9% to 14.4% of sales. The Engine business absorbed the heaviest impact from premium freight costs and other related inefficiencies stemming from supply chain disruptions. We now anticipate full year revenues rising 23% to 27%, up from our earlier guidance of 12%, mainly because of stronger demand in North American truck and global construction markets. We've raised our forecast for EBITDA margins to a range of 14.5% to 15%, since we expect stronger volumes, and joint venture income higher than we previously anticipated will more than offset the extra supply chain costs. In the Distribution segment, first quarter revenues grew 1% over last year. EBITDA held flat as a percent of sales at 8.7%, reflecting gains from our North American transformation work and improvements in certain international businesses, partly offset by weaker part sales caused by supply chain challenges. Underlying demand for parts stays strong; we've kept our 2021 outlook for Distribution revenues at up 6% to 10%. And we now expect EBITDA of 9% at the midpoint of our guidance, down from our prior year guidance of 10.1%, because of a reduced outlook for parts alongside stronger demand for power generation equipment and other engine sales. In components, first-quarter revenues rose 43%, helped by stronger truck demand across North America, China, India and Europe. EBITDA went from 18.6% of sales to 19.6%, reflecting gains from higher sales and reduced product coverage costs. For 2021, our expectation now is that components revenues will climb 30% to 34%, compared with our earlier guidance of an 11% increase. We've also lifted our EBITDA margin forecast to 17% at the midpoint, versus 14.9% previously. Turning to Power Systems, revenues were up 16% in the first quarter, powered by stronger worldwide demand for power generation and mining equipment. EBITDA rose from 8.7% to 12.3% of sales, mainly because of the advantages of greater volumes and lower product coverage costs. We now anticipate Power Systems revenues will be up 18% at the midpoint, against our prior-year guidance of 9%. Projected EBITDA margins sit in the 11% to 11.5% of sales range, above our earlier guidance of 10.6%, owing primarily to the improved sales outlook and reduced cost of quality. Within the New Power segment, revenues grew to $35 million, a 250% jump, on stronger sales of battery electric systems, fuel cells and electrolyzers. EBITDA losses for the quarter came to $51 million, matching our expectations as we keep investing in new products and scaling up before widespread adoption of the new technologies.
Mark Smith
executiveLooking at the entire year, our projection for New Power revenue stays where it was, between $110 million and $130 million, and net expense should land around $200 million at the midpoint of what we've guided. When you combine the revised projections for each segment, the net effect is that we now see total company revenues climbing 20% to 24% in 2021, which is higher than the 10% increase we previously guided. Our outlook for company EBITDA margins is being lifted to a range of 15.5% to 16%, versus the 15% to 15.5% we had before. What's behind this improvement is mainly the better sales picture, which we believe will generate additional earnings that exceed the higher supply chain costs. Earnings from joint ventures are now anticipated to decline 5% this year, a change from our earlier forecast of a 25% to 30% drop. The main factor behind this upgraded forecast is sustained momentum in China's truck and construction markets, particularly during the first half of the year. At present, we anticipate that the first quarter will represent the peak for joint venture earnings this year, with results likely softening across the remaining quarters and especially in the second half, following China's July implementation of the new National Standard VI on-highway emissions regulations. Our effective tax rate is expected to come in at 20%, 25% this year — 22.5% when you exclude discrete items. Capital expenditures reached $87 million during the quarter, compared with $75 million in the same period last year. For 2021, we anticipate capital investments falling between $725 million and $775 million, which matches the guidance we gave previously. As Tom noted, we gave back $615 million to shareholders via dividends and share repurchase, consistent with our intention to return 75% of operating cash flow this year. In summary, we posted strong results in the first quarter and have raised our outlook for both sales and profitability this year. Tightness in the supply chain, together with the continuing effects of COVID-19, will keep posing difficulties in the weeks and months ahead. I'd like to express gratitude to every one of our employees for their dedication to serving our customers through these difficult circumstances and producing strong financial results for the full year. We'll keep prioritizing investment in the products and technologies that fuel profitable growth and continue returning capital to shareholders, all while enhancing how the company performs day to day. Thank you for your interest today, and I'll now hand it back to Jack.
Jack Kienzler
executiveThanks, Mark. <<operator_script>> Operator, we are now ready for our first question.
Ann Duignan
analystCould you give us a bit more detail on what's behind the revised outlook for the Components segment? It really sounds as though the bulk of that shift came from a prebuy in China that came in larger than anticipated. Is that an overread on my part? Then, related to that, my follow-up would be whether you can shed some light on how revenue and profitability will be paced across the coming couple of quarters, weighing the prebuy against India. And beyond that, what might the back half look like if input costs potentially fade?
Mark Smith
executiveAppreciate it, Ann. Mark here. I'll start us off on that one. What we're observing is an improving view across a majority of end markets that stand to gain the Components business, which holds a leading position in markets worldwide. So China isn't the only factor. You're correct that China has clearly aided that business, where we have consolidated operations, and that has helped our results. That largely applies to the first half of the year. The effect of that China strength should moderate in the quarters that follow in the latter half of the year. I'll return shortly to discuss the company's total joint venture income, not only Components. So yes, that's higher volume, and the Components business is converting it well into greater profitability. Then, secondly, the Components business gained from reduced quality costs and a favorable change in estimate tied to our product coverage or warranty expense during the first quarter, which lifted results somewhat, and that's the reason the full year margin sits a bit under the first quarter's performance level. India, yes, India made a meaningful contribution. For the Components business in the first quarter, consolidated revenues in China and India together came to roughly $600 million. That works out to something like an annualized $2.5 billion business. We think that figure could fall from that pace in the second half of the year by as much as 40%, subject to how demand plays out. Conversely, if supply chain allows, we clearly expect North America demand to keep strengthening. If I now bring it back up to the whole company view, the narrative on China is essentially identical: we anticipate a substantial dropoff in the second half of the year, and our visibility into that is limited. For now, that's an assumption. Q1 stayed stronger than what we had expected 3 months ago. Yet there are — some worrying signals exist. Inventory levels are elevated. Clearly, truck prices rise as the new emissions regulations arrive. So we've assumed roughly a 40% to 50% decline in the quarterly earnings run rate in the second half of the year relative to where we stand today. So ideally, that covers the big picture on China.
Jerry Revich
analystTom, nice work on those medium-duty engine contract awards that were made public during this quarter. I'd like to know, could you describe how the talks about collaborating with a few current medium-duty engine clients are progressing when it comes to delivering additional services around electrification? How much does that move those talks forward? Can you give us a bit of background on whether anything changes because of this closer way of working together?
N. Linebarger
executiveSure. I appreciate that, Jerry. What I'd tell you is that, on a broad basis, like we've mentioned on earlier calls, we're currently in discussions with each and every OEM regarding what their technology needs are, starting from the present moment through to the ultimate shift toward zero carbon. Those technologies cover diesel plus more sophisticated diesel variants, natural gas, hybrid, electric, and fuel cell. And like I've noted previously, from an investment standpoint the diesel piece appears less workable for a lot of them, simply because their volumes are somewhat lower than what we have and in most ranges — though definitely in midrange. So I believe that explains why you're hearing about these announcements. On top of that, we're also presenting the alternative technologies to them, transition technologies included, so they can determine a path from their current position to somewhere that becomes a workable zero carbon answer later on. I'd say every one of those discussions is happening right now, yet it's tough at this point for OEMs to grasp what the schedule for such transitions will be and precisely which technological route they want to take, much like it is for the majority of market observers. That's tough since whether these technologies work economically hinges on a carbon tax, regulations, or some other factor being introduced, given that diesel remains significantly less expensive than the alternatives at present. And naturally, it keeps delivering better fuel economy each generation. So indeed, those discussions, as you point out, are taking place. Still, I'd simply note that mostly we're engaged in work alongside these companies; however, precisely what their strategies will end up being and what part we'll have in those future technologies continues to be under discussion. Meanwhile, the diesel side is advancing right now since they must decide on investments at this moment. Should I put money into the new platform? Or should I let somebody else do it?
Jerry Revich
analystGreat. And Tom, when it comes to light-duty diesel, could you share how optimistic you feel about comparable chances like the ones we're watching break our way in medium-duty? How hopeful are you regarding what's available in light-duty?
N. Linebarger
executiveIf you mean passenger cars and similar vehicles, my sense is that the openings are fairly narrow. They aren't nonexistent. We do hold discussions with folks, but the number is smaller. My main reason for thinking this is that, in my opinion, most passenger car makers conclude that putting money into new diesel platforms likely isn't a wise place to invest. Their own thinking is that they'd rather direct more funding toward a nearer-term future of shifting to hybrids or electric vehicles. Once more, that's not the case everywhere. Let me be clear on that. Pickup trucks and certain other segments are — the shift there is murkier. Yet even in those areas, I'd say the momentum leans more toward that path than toward pondering what my next diesel platform will be.
N. Linebarger
executiveRoss, I'd like to build on what Jerry asked, perhaps from a different angle. What's the outlook for heavy-duty engines, and how likely is it that Daimler will outsource its heavy-duty diesel engines as well? And regarding medium-duty, have you provided any figure for the extra content you might secure on the Component side? Or is that still undecided — still up in the air? Yes. Ross, let me take the heavy-duty question first. I appreciate it. When it comes to heavy-duty, naturally, what Daimler decides is something better directed to them rather than to us; however, I'd simply note that we are holding discussions about heavy-duty with multiple partners. As you suspected, the volume issue I brought up before — about investing for limited volume — is far more pronounced in medium-duty. The gap between our customers' volume and our own is strikingly wider in midrange. In heavy-duty it's also different, but not to the same degree. Our position is clearly bigger, yet the disparity isn't as large. So those talks will probably take more time. And for an OEM, the decision isn't as straightforward in heavy-duty as it is in medium-duty. Even so, they still have platform investments to make, and so do we. The real question, then, is how many of us are willing to make them; therefore, I do anticipate additional partnerships emerging in heavy-duty. It's simply that those discussions remain in progress.
Jennifer Rumsey
executiveI'll take a moment to discuss the Components segment; this is Jennifer speaking. I doubt I need to introduce myself — I'm the sole woman participating in this call. Naturally, the approach we've taken alongside our partners is to provide engines in situations where that's what they want from us. And in cases where engines aren't what we're supplying, we frequently deliver components to them through our Components operation. So as we examine these fresh alliances on the Engine front, sometimes the Components side is already in place with us; regarding certain other components of ours, however, it will open up additional expansion potential; and beyond that, naturally, we also carry those partner discussions forward into components in situations where they keep building their own engines. Thus we genuinely see solid prospects for growth stemming from these strengthened collaborations across both the Engine and Component areas.
N. Linebarger
executiveRoss, broadening the question out, when you factor in all the worries about supply chains, and maybe a few of the disputes involving the newer players in the truck space, do you see customer attention on EV and hydrogen tilting more toward established incumbents such as yourselves — companies with diversified, long-standing manufacturing footprints worldwide? On that, Ross, I'd tell you it's tough to call. What I believe is this: it shouldn't come as a shock that certain of the startups — the pure plays in low-carbon technologies — are having a hard time showing a business model that works right now. No surprise there, given how tiny the volumes are. People understand the transitions will arrive eventually, yet without regulations, or a carbon tax of some sort, or another mechanism that changes the equation, these things aren't viable. So demonstrating a workable business model is a struggle for them. None of that should catch anybody off guard. That's simply the reality. As we see it, we're positioned well to give customers solutions right now — transition-type solutions, meaning natural gas and hybrid, followed by the end-state solutions. Our hope is that this turns out to be the finest answer, and we believe investors are smart to seek out businesses similar to ours that can complete the entire lap. Still, when it comes to how this plays out — whether supply chain issues are altering people's thinking, or it's simply that the business models appear unviable — I can't say for certain. That said, I'm seeing what you're seeing: volatility exists in capital flows, in these companies' valuations, and in how their success is perceived; and I'm confident a brighter day will come for them, just as today is a cloudy one. Our belief is simply that at Cummins we hold the most robust solution.
Jennifer Rumsey
executiveAnd, as is our habit, we're being open with our customers, and we're doing all we can to satisfy their demand despite every supply difficulty; so I believe that carrying on in that way matters a lot for keeping relationships strong.
Rob Wertheimer
analystMy fast question concerns what you'll do going forward. Within Power Systems and power generation, is the rebound widespread? Or does it lean somewhat toward data centers? I'm not sure whether data centers have been rising in the relative mix; then regarding the remaining operations, and mining looks like quite a solid rebound, is there anything specific worth mentioning? We're all aware commodity prices are robust. I'm not sure whether any one-off exists here.
Mark Smith
executiveRob, this is Mark. I'd say data centers certainly represent the lasting secular growth channel, yet during this quarter we've observed demand for power gen recovering more broadly compared with 12 months earlier. The U.S., China, India and Asia Pacific, plus other regions; and of course, inside the U.S. and China, data center counts as a significant piece of that. Yet it's somewhat wider; and regarding mining, the bulk of our engine sales growth is coming from international markets at present. And without a doubt, the outlook has gotten better — confidence regarding mining has ticked up somewhat.
Steven Fisher
analystI'd like to know what you're assuming for freight and other costs over the next few quarters compared with that $105 million from the first quarter. And how does that flow through to how Engine margins move across the year? I'm just curious whether things might soften a bit before they get better.
Jennifer Rumsey
executiveYes, this is Jennifer Rumsey, and thanks for asking. We did experience premium freight in Q1 that came in above what we expected, since we were handling rising revenue and simply working to keep pace within the supply chain amid various disruptions. Our expectation is that this will get better. In Q1, we were at 1.7% of sales. As we move into Q2, we believe that improves, coming down from roughly $105 million to closer to $60 million, and then it keeps getting better as the year goes on; disruptions will still be above normal, simply because a backorder exists and we're essentially trying to catch up with the situation. I'd also mention that what's happening in India right now is somewhat uncertain for us, and how it could affect our local markets there, plus the exporting from India of our own engines and other components within the supply chain.
Mark Smith
executiveNow, regarding the margin in the Engine segment, Steve, two things can move it either way. First, yes, we've baked in a certain amount of gain, especially across the back half, and a portion of those extra expenses — not every one of them, though the majority — is landing in the Engine segment. Weighed against that is the drop we expect in Chinese truck demand, which specifically will hit the joint venture's earnings. So when you net it out — there are two variables in motion, yet the overall effect isn't a big shift from one quarter to the next. Still, those two main assumptions are what largely unfold differently during the year's second half.
Steven Fisher
analystAll right. And beyond that, I'm just interested in the larger view — how do you see natural gas fitting in over the long term? And what effect does that have on the natural gas investments you're making right now?
Jennifer Rumsey
executiveSure. We hold a top spot in North America at present when it comes to natural gas offerings. Also, the engines we sell in the U.S. have already earned certification for surpassing the CARB '24 ultralow NOx rules, which could drive some extra demand in that market; beyond that, we're providing natural gas offerings in additional regions of the world; thus, in our view it serves as a bridge solution. And we intend to keep supplying products that satisfy our customers' requirements as a bridge from diesel engines to a zero carbon future.
N. Linebarger
executiveSteve, as I said during my prepared comments, these bridge technologies matter quite a bit, since the zero-carbon answers we're developing represent the ultimate winners down the road. The trouble lies in "ultimate," because once more, the expense along with the infrastructure needs tied to electric fleets and/or fuel cell or hydrogen fleets are considerable. Consequently, we think that by partnering with OEMs, we can bring those expenses and that infrastructure into existence, yet infrastructure will be required; government investment and other commitments will be required to make it happen; therefore, for now, these stopgap options will carry real weight. Just how long the interim period lasts remains uncertain, and it might stretch out; thus, our position is that natural gas, hybrid, and certain other technologies in our portfolio will genuinely assist our customers through such stretches, which, once more, might be — we might sell throughout our lineup of 1 billion engines in those categories before — the transition might amount to 1 billion engines. I mean, that's an enormous quantity of engines across the years, correct, spanning — throughout the whole industry over multiple years; so it truly matters to think carefully about those transition technologies, exactly as with the endgame solutions.
Jennifer Rumsey
executiveColton Zimmer here, filling in for Jamie Cook. We'll start with a question about China. When you look at your guidance, do you figure the slump there is less severe than what you might have expected at first? Or has it simply been delayed, meaning 2022 might decline again? Then our second one concerns how incrementals are set up for next year. Once supply chain pressures and expenses ease, could we see unusually large incrementals during 2022? Or has that opportunity already passed us by in this cycle?
Jennifer Rumsey
executiveThank you. Let me say a few things regarding China. The market this year is running somewhat above what we initially projected, and we believe that reflects robust demand during the first six months. Demand keeps rising for the NS V product before the changeover occurring in July. That prebuy, along with supply chain difficulties, is pushing our OEMs to produce as much as they can right now. Another factor we expect to shape the latter half of the year is that certain regions have lengthened the window during which NS V product may be registered. So entering Q3, we'll begin to see NS V product inventory come down. After that, we're closely monitoring how fast customers move to purchase that NS VI product, since it carries a higher price tag because of the additional content. That's really the pattern: strength during the first six months, followed by an anticipated decline in the latter half. 2020 set a record; we've consistently said we expect it to return to normal levels. Naturally, it has remained robust. So things have been somewhat hard to predict, though we do expect a drop-off during the latter half of the year.
Mark Smith
executiveAlso, at this point there isn't much we can say regarding the coming year. Over the last 2 years, what we've observed is that incentive programs put in place by the government ended up working quite well, with truck customers adopting them at a strong rate. So basically, it's simply difficult to predict what future plans might be for removing older emissions trucks from the fleet. So it's premature to comment. For the back half of this year, a significant decline is what we anticipate, though I'd rather not weigh in on 2022 just yet. Now, regarding what you said on incremental margins — of course, the longer those inefficiencies stick around, eventually that's plainly a negative for the current year; we've flagged it; our expectation is that they get better during the second half of the year. We do anticipate improvement on that specific line item as we move into the next year. Incremental margins involve plenty of shifting pieces. That said, on that line item by itself, as we sit here right now, our hope and expectation is that it comes in stronger next year compared with this year. As for everything else, we'll save that for another time.
Steve Volkmann
analystGreat. Tom, I'd like to return to what you were saying about transition solutions. A lot of folks, it seems, are predicting some rather substantial hybrid solutions across the coming decade or so, yet those sorts of projects never really come up in our conversations. Are you doing work on them? Do you have customers for them? And I'm curious whether that actually suits your strengths, since hybrid would presumably mean, when you consider everything, a somewhat smaller engine. I'm just interested in what you'd say about that.
N. Linebarger
executiveSteve, yes is my response to that first question. Projects are absolutely underway right now. They're specific. Extremely specific. Launch dates exist for them, and within these next several years they will be launched. Hybrids will be on the road from us. Through our key strategic OEMs, we will be selling them. So as you suggested, hybrids are on the move. And once more, how long they live mostly hinges on how far zero carbon solutions come down in cost and durability, reliability, plus how the infrastructure gets built up, and both will be needed. So that, I think, explains why I said these transition solutions now being put in place, well, they may stick around for a while, or they may stick around for a shorter period, depending on the country, the application, the region, because those 2 things — the infrastructure and the cost — both hinge on application and, of course, country and how much infrastructure is being built. But the hybrid programs are real. They are getting launched. It's happening now. And as for engine size, initially, I think, what we'll see with hybrids is a relatively mild hybrid as the first step. And on engine, those won't make a big difference. How big the engine is won't be impacted very much by the size of the battery. But you are right that as larger batteries get added, then less engine is needed to carry the same load. But those, I think, are probably generation 2 solutions rather than generation 1.
Steve Volkmann
analystGreat; and perhaps a fast follow-up for Mark. You spoke quite a bit regarding rising expenses, logistics, and so on, yet price didn't truly come up. Are you all responding to this by charging more? My guess is this is a fairly favorable climate. Just whatever thinking you have on that.
Mark Smith
executiveAppreciate it. Excellent question, Steve. So apart from the premium expenses, we mentioned at the year's outset about positive 40 basis points from price and material cost, those combined. We're holding onto that 40 basis points, though I'd say there are indications of a slight amount of creeping inflation generally; so yes, we had pricing established, had assumptions regarding cost increase generally. We're basically just barely maintaining things at the moment, but that's all.
N. Linebarger
executiveSteve, mind if I jump in with something? Our expenses, as you noticed, came in much greater than what we'd projected only 3 months back; and to put it plainly, the main culprit is semiconductors. Supply chain issues abound. We've got the weather in Texas, plus fresh difficulties in India now. Whatever you can think of, we're short on it. Semiconductors, though, are the biggest one. That's the category that's genuinely tough to handle. During this quarter, we wound up purchasing chips on the market, via the aftermarket, and feeding them back into production; we pushed things back and pushed things back and pushed things back again to satisfy our customers' demand. Our customers, following a rather brutal first half of last year, are at last watching demand climb and truly want to get trucks out to their own buyers. And we genuinely want to assist them with that. So honestly, we absorbed the hit. We essentially pulled in whatever we could as quickly as we could and got it out to them, and we didn't increase prices or do any of that sort of thing. We simply shipped it; and we suffered, suffered badly this quarter. That's simply the plain truth; and it's because we felt an obligation to those customers to deliver the product as best we could while conditions were favorable; and so we aren't truly altering any of that except that hopefully, like Jennifer mentioned, we'll manage to bring these expenses more under control since we won't need to reschedule as often. We recognize where our chips remain insufficient, but we recognize where they're originating from better now, and we recognize how many we actually possess. And we'll manage to level some out, schedule some, and cut down on premium freight. It's still terrible, but it'll be less terrible in Q2 and less terrible once more in Q3 as we get more established. Still, it was a tough quarter, and I feel pleased about what we did for customers, and reaching that point wasn't easy.
David Raso
analystLet me start with something I want to get straight. On the Component side, growth runs at 43% in Q1 and then decelerates to 28% for the remaining part of the year, whereas Engine moves the other direction — 14% growth during the quarter and 29% for the balance of the year. That's entirely a function of China and India in the back half, since Components clearly carries double the China and India exposure that the Engine division does, right? It has nothing to do with the possibility that your customers are pulling product at this particular point in the cycle. Am I right about that?
Mark Smith
executiveThe short answer is no — this is a structural matter. So it isn't the case that Components holds twice the exposure. The way it's structured differs; the Engine operation mainly runs through joint ventures in China and India. And yes, you've got it right, that's — apart from that, that's the key driver. There may be minor timing variations, but that isn't what's at issue here, David; it's simply how our business is organized.
David Raso
analystThe tightness in the supply chain that we're observing — and Tom, maybe this is about how you typically view the first year of a rebound versus the second, with these supply chain problems in play — in what ways are you looking at the cycle in a different way? In what ways are you looking at inventories as year 1 wraps up? I'm simply attempting to get a sense of your thinking a little, regarding how you're working through this cycle, since it appears inventories will remain tight for the entire year. And that ties in as well to a question about pricing. I'm not asking for '22 or '23 guidance from you, just the larger picture.
N. Linebarger
executiveNo, I follow you, Dave. I'll let Jen speak a bit more about the way she views customers' orders. But broadly, I'd simply say our perspective is that whatever doesn't ship this year will ship next year, because there's a supply constraint. Demand is strong out there. And should the cycle take longer to recover, or should people be unable to get every truck they want, they'll get them next year. I mean — and we've observed that in other regions where truck manufacturers' capacity doesn't ramp up as fast — in Europe, for instance, during the last upturn, we saw that. Finishing the cycle simply took them longer; and I believe that's what will happen here. It will take longer to finish to the degree that truck demand can't be fully supplied, which wouldn't be a bad thing in itself, if it stretched out further. I think that's how we see it — as a longer, extended cycle, simply because we can't — we're constrained on supply. And I'll let Jen discuss what she's seeing from customers on that front.
Jennifer Rumsey
executiveAbsolutely. Like Tom mentioned, buyers are doing whatever they can to secure as much as possible since demand is running hot. Stock levels are down, and back orders keep piling up. And we — I believe supply will remain — for the most part, the industry will be constrained by supply all through the year, and that's exactly why we're eager to get as much product out the door to our customers as we can so they're able to build and satisfy that demand. And from what I hear when I speak with customers, they expect this to carry over into next year, simply because there's no way enough trucks can be built to satisfy all of that demand that exists out there.
Charles Dillard
analystAnd so, carrying on from what you said regarding Daimler, could you describe how the medium-duty transition will unfold over time? You noted 2024 CARB as one catalyst, I believe, yet what about your chance to pick up extra share between next year and after that?
Jennifer Rumsey
executiveYeah. While that partnership gets built out, the main thing creating more position with Daimler is the changeover in emissions regulation. It will therefore begin in the U.S. in the '24 time period, and afterward in other parts of the world as emissions change; the pace of growth will largely be set by that.
Charles Dillard
analystUnderstood; and could you also discuss the chance in your components segment outside China and India, in relation to the transitions taking place during this year? In what areas do you foresee additional possibilities for raising your content intensity?
Jennifer Rumsey
executiveSure. As you mentioned, a major avenue for expansion for us in the Components business has involved China and India, driven by emissions growth and new customers; thus we are increasing content with customers we already have, while at the same time bringing on new customers. One more possibility I'd like to point out in China is that we are introducing the Endurant transmission. That is tied to our Eaton-Cummins joint venture, in China during this year, and the market there for automated manual transmission, in our view, is expanding from 8% to 22% this year. We now have a low-volume mine that has begun producing products. So we will ramp that up during this year. That represents another expansion possibility within the Components business. In China during this year, we are also introducing an 18 speed version of that transmission later in the year. And as regulations keep evolving and we broaden some of those partnerships, that will deliver additional expansion possibility for the Components business.
N. Linebarger
executiveAs Jen said before, Chad, once our partnerships get stronger, we don't just receive additional components since our engines—which naturally contain every one of our components—get designed in; we also end up bringing more of our own components onto the other engines, simply because doing so lowers the technical investment those partners must make to adopt certain of our components and our recipes for their engine. So that pattern is simply going to keep going. It's an ongoing trend, and it will carry on.
Jack Kienzler
executiveMuch appreciated. My gratitude, as ever, goes out to each of you for the ongoing attention you show toward Cummins. Once this call wraps up, I'll be around to take your questions. And indeed, I wish every one of you a wonderful day.
Operator
operatorEveryone, that brings an end to the call for today; we appreciate your joining us, and at this point you're free to hang up your phones.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Cummins Inc. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.
Get the API View API docs →This call discussed
For developers and AI pipelines
Programmatic access to Cummins Inc. earnings transcripts and 132,000+ others is available through the
EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments,
full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.
More tools for stock research
OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Cummins Inc. or any ticker on your watchlist.
StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.