Cummins Inc. (CMI) Earnings Call Transcript & Summary
February 6, 2024
Earnings Call Speaker Segments
Chris Clulow
executiveThanks. Morning, everyone, and thanks for joining today's call, where we'll go over Cummins' results for Q4 and the entire 2023 fiscal year. With me are Jennifer Rumsey, who serves as our Chair and Chief Executive Officer, and Mark Smith, our Chief Financial Officer. All of us will be on hand for questions once the teleconference wraps up. Prior to beginning, I want to point out that certain information you hear or receive today will include forward-looking statements as defined under the Securities and Exchange Act of 1934. Those statements convey our forecasts, expectations, hopes, beliefs, and intentions concerning future strategies. A variety of risks and uncertainties could cause our actual future results to differ materially from what those forward-looking statements project. You can find additional details about these risks and uncertainties in the forward-looking disclosure statements included in the slide deck and in our filings with the Securities and Exchange Commission, especially the Risk Factors section of our most recently filed Annual Report on Form 10-K, along with any Quarterly Reports on Form 10-Q filed afterward. On this call, we'll also cover certain non-GAAP financial measures, and we'll direct you to our website for the reconciliation of those measures to GAAP financial measures. Our press release, which includes a copy of the financial statements, plus a copy of today's webcast presentation, can be found on our website in the Investor Relations section at cummins.com. With that taken care of, I'll hand things over to our Chair and CEO, Jennifer Rumsey, to get us started.
Jennifer Rumsey
executiveThanks, Chris, and good morning to all of you. I'll begin by recapping 2023 and going over what we delivered in the fourth quarter and across the whole year, and after that I'll wrap up by talking about how we see 2024 shaping up. Then Mark will walk you through additional specifics on our Q4 and full-year financial results, along with what we're projecting for this year. Looking back at 2023, I take enormous pride in everything Cummins and our workforce delivered for those with a stake in our success, and I'm genuinely excited about what lies ahead as we keep proving how unwavering our commitment is to leading globally in clean energy technology and innovation; we moved the needle considerably on our Destination Zero strategy, and it remains evident that taking this two-pronged route to lowering greenhouse gas and air quality effects from what we sell is the correct way to serve what our customers need right now while still expanding our business and our impact. We achieved that both by growing our core operations and by creating fresh zero emission options via Accelera by Cummins. When it came to our main business lines, the dominant story of 2023 involved committing more than a billion dollars toward our engine production facilities across the United States. That investment was meant to support the sector's first fuel-agnostic engine and platforms. We also unveiled the X10 fuel-agnostic series, which will reach North America during 2026. Beyond that, we launched several collaborations tied to our natural gas X15 engine, which makes its North American debut this year. This gives our customers an even stronger way to hit their decarbonization goals. It represents the first natural gas engine in the industry built specifically for heavy duty and on-highway truck uses, offering customers a path to reduce nitrous oxide and greenhouse gas emissions without sacrificing performance. Ahead of the launch later this year, we keep seeing robust interest from OEMs and end users alike. Over in our Accelera business, we disclosed a joint venture alongside Daimler Trucks and Buses, PACCAR, and EVE Energy aimed at speeding up and localizing battery self-production and the battery supply chain within the US. This quarter we also shared that Marshall County, Mississippi had been chosen for the 21-gigawatt-hour factory, which should generate over 2,000 US manufacturing jobs, with output expected to start in 2027. Accelera hit another milestone this year as well, with electrolyzer order backlog surpassing $500 million. Since electrolyzer demand keeps climbing, we began making them at our first American production location—the Cummins Power Generation Facility in Fridley, Minnesota. And last, we hold firm to the major role we fill in the shift toward cleaner energy, with meeting emissions rules continuing to be an essential element of that work and a core part of what we stand for. We said so plainly back in December, when we told everyone we'd reached a deal in principle to resolve claims from US regulators about how we certify and comply on emissions for certain engines, primarily the ones powering our pickup truck applications. Following four and a half years of diligent collaboration with regulators, securing a settlement was the optimal route for us to gain certainty on this issue and proceed with certifying our new products while advancing our Destination Zero strategy. We've broadened and reinforced our emissions compliance program to help guarantee our products meet increasingly strict emissions regulations worldwide. Our product compliance and regulatory affairs organization, which we started in 2019, reports directly to me, and positions come as to satisfy global product compliance requirements and deliver solutions for our customers that are safe and lead to a cleaner environment; now I'll discuss overall company performance for the fourth quarter of 2023 and address some of our key markets. Looking at the markets we serve, there's still strong appetite for what we make in numerous important regions. This quarter's revenue reached $8.5 billion, a 10% increase over 2022, driven by healthy demand throughout most of the world. On EBITDA, we posted a loss of $878 million — that's negative 10.3% — compared with a positive $1.1 billion, or 14.2%, during the same period last year. Within our fourth quarter 2023 figures, there were $2.04 billion in charges related to the deal settling US regulatory claims, $42 million in charges from a voluntary retirement and separation program, and $33 million in charges connected to separating the Atmus business. By contrast, the fourth quarter of 2022 had $19 million in charges associated with the Atmus separation. If you set those things aside, our EBITDA came to $1.2 billion, which works out to 14.4% of sales, compared with $1.1 billion, or 14.5%. The EBITDA figure in dollars was higher than it was a year earlier, because the benefit from better pricing and larger volumes outweighed the added costs we saw in selling, administrative, research and development, along with inflationary pressure. Spending on research and development went up during the fourth quarter, reflecting our ongoing commitment to putting money into the products and technologies that will give us an edge down the road, especially within the engine, components and Accelera segments. On top of that, operating cash flow during the fourth quarter of 2023 was exceptionally robust, reaching $1.5 billion, compared with $817 million in the fourth quarter of 2022, which reflects the continued emphasis we place on managing working capital across the business. For 2023, we hit a record top line of $34.1 billion, which came in 21% above 2022. That growth came from bringing Meritor on board along with robust demand in the majority of markets worldwide. On EBITDA, we landed at $3 billion, equating to 8.9% of sales, compared with $3.8 billion, or 13.5% of sales, the prior year. Several items are baked into the 2023 numbers: $2.04 billion in costs related to the deal settling US regulatory claims, the voluntary workforce reduction initiative I brought up earlier, plus $100 million in costs connected to spinning off the filtration business. For comparison, our 2022 figures carried $111 million in costs from halting operations in Russia indefinitely, along with $81 million tied to the filtration business separation. If you take out those items, we posted record EBITDA of $5.2 billion — that works out to 15.3% of sales for 2023. In 2022, the figure was $4 billion, or 14.2% of sales. The reason for the improvement is that benefits from higher volume and pricing more than offset increases in selling, administrative, research and development, and inflation costs. Across all three segments — distribution, components and power systems — EBITDA margin was up compared with the prior year. Power Systems had a particularly strong finish to 2023, posting full-year EBITDA of 14.7% of sales, up from 12.2% in 2022. That segment just completed the first year of its focused business transformation effort, and we're encouraged by the improvement. As our guidance indicates, we expect further margin expansion this year. Looking past our individual business units, Meritor wrapped up 2023 with full-year EBITDA representing 10.8% of sales, up from 7.4% in 2022, thanks to the outstanding work our employees did capturing value across the entire organization. I'm extremely happy with the results Cummins Meritor has delivered thus far, and we're continuing the initiative to boost margins there while widening its footprint around the world. On top of that, operating cash flow hit a record $4 billion for 2023, a major jump from the $2 billion recorded in 2022. I take pride in what our leaders and employees accomplished in 2023, since they helped us deliver on one of our key priorities. Going forward, generating strong cash flow will stay at the top of our list.
Jennifer Rumsey
executiveLet me now walk through our full-year 2024 outlook, before giving some perspective on specific geographies and end markets. When it comes to the guidance we've issued for 2024, Atmus remains in the picture for all 4 quarters, while any expenses or gains tied to the planned spinoff of that business are left out. At the total company level, we're looking for revenue in 2024 to fall somewhere between 2% and 5% versus 2023, with EBITDA landing between 14.4% and 15.4% of sales, reflecting our expectation that demand will moderate across several of our major regions and markets — North America heavy duty truck in particular. As we move into 2024, we anticipate the heavy duty market will hold near where it sits today, a touch below the peak reached during the first half of 2023, before weakening further in the back half of the year, as reflected in our forecast. For North American heavy duty truck production, the industry is expected to come in at 245,000 to 265,000 units during 2024, which works out to a 10% to 15% drop from the prior year. Turning to medium duty trucks, we see a market of 140,000 units to 150,000 units, which is 5% lower to flat against 2023. Our pickup truck engine shipments in North America should total 135,000 units to 145,000 units in 2024, representing a 5% to 10% year-over-year decrease, as we get ready to roll out our model year 2025 in the fourth quarter. Over in China, total revenue, joint ventures included, is projected to rise 3% in 2024. For heavy duty and medium duty truck demand, our projection spans a 5% decline to a 10% increase, while in the light duty truck market we anticipate a range running from 5% down to 5% up. Replacement demand should serve as the primary catalyst, though a sluggish economy and moderating export demand could blunt its impact. Even with this sluggish recovery in the China truck market, we anticipate that the 15 liter natural gas engine will keep performing strongly, given that we captured roughly 20% share in the heavy duty market for 2023. In India, total revenue, joint ventures included, is projected to grow 9% in 2024, largely on the back of robust power generation and on highway demand. Industry truck demand there should be flat to 5% higher across the year; in global construction, we're looking at a 5% to 15% year-over-year decrease, mostly because of weak property investment and contracting export demand in China. Our major global high horsepower markets should stay strong through 2024, we believe. Global power generation market revenues are forecast to grow 5% to 10%, fueled by ongoing gains in the data center and mission-critical markets. For mining engines, we anticipate sales could decline 5% or rise 5%. Meanwhile, oil and gas engines—a small segment for us—should see demand fall 40% to 50% in 2024, mostly because of weaker demand in North America. On aftermarket, our outlook for 2024 ranges from flat to a 5% gain, since we believe we've largely worked through inventory management and the destocking that occurred across the industry during the second half of 2023. At Accelera, full-year sales should land between $450 million and $500 million, versus $354 million in 2023. Our pipeline of electrolyzer orders keeps growing, and we expect to deliver those across the next 12 months to 18 months, while also anticipating continued growth in electrified components. To sum up, 2023 set a record for revenues and operating cash flow, excluding effects tied to the agreement resolving U.S. regulatory claims. 2023 also marked a record for EBITDA, net income, and earnings per share. Although 2023 revenues came in at the high end of what we expected, we foresee moderating demand for North America truck production during the second half of 2024. We expect that moderation to be partly offset by a robust power generation market, resilience in our distribution business thanks to a solid aftermarket presence, and better Accelera sales. Beyond that, we're acting to lower costs, optimize our business, and put Cummins in position for continued success in 2024. Our strong position lets us keep investing in the future, deliver new technologies to customers, and return cash to investors. Before I finish, I want to formally announce that Analyst Day is now set for May 16 in New York City. I'm eager to talk more about our strategy, and invitations should go out soon. I'll now hand things to Mark, who will cover our financial results in greater detail. Mark?
Mark Smith
executiveThanks, Jen, and hello everybody. I should mention that I've got a bad cold today. So if I come across as grimmer than normal and somewhat hoarser, I'd ask you to keep that in mind. Our fourth quarter operational performance was solid, coming in above what we expected on revenue while EBITDA margins landed right where our guidance indicated. Versus 2022, sales for the entire year rose 21%, and operating cash flow better than doubled, hitting a record $4 billion, which shows how intently our employees have focused on satisfying customer demand and enhancing working capital. Let me now walk through the fourth quarter and full year results in greater depth. Q4 revenues came to $8.5 billion, while EBITDA was a net loss of $878 million, equal to negative 10.3% of sales. Across the full year, we posted record revenues of $34.1 billion, with EBITDA of $3 billion, or 8.9% of sales. As Jen noted, we took a one-time charge of $2.04 billion during Q4 to resolve the US regulatory claims we had previously disclosed. Results for the fourth quarter also featured $42 million in costs tied to the voluntary retirement and separation programs. Costs tied to the Atmus separation we've been planning came to $33 million in Q4, and $100 million for the whole year, compared with $19 million in the fourth quarter of 2022 and $81 million total the year before. On top of that, full year 2022 results included $111 million in costs from the indefinite suspension of our operations in Russia. So that the fourth quarter and 2023 full year operational performance of our business is clear, I'm now excluding the costs connected to the regulatory settlement, voluntary retirement separation programs, the planned Atmus separation, and the indefinite suspension of our operations in Russia from what I say next. Q4 revenues hit $8.5 billion, a 10% increase versus a year earlier. In North America, we saw an 8% increase in sales, which came from improved pricing in several end markets as well as higher demand for power generation products. Our international revenue grew 13%, driven by strong global demand for power gen, particularly from data centers. This quarter's EBITDA reached $1.2 billion, representing 14.4% of sales, compared with $1.1 billion, or 14.5% of sales, in the same period last year. Gains from better pricing were counterbalanced by higher compensation expenses and by additional investment and development, plus capabilities, within our Accelera segment. The increase in variable compensation costs was largely due to stronger operating cash flow, which surpassed what we had anticipated for the quarter and for the entire year. I'll now go through each line item in a bit more depth. We posted a gross margin of $2 billion, which equals 23.7% of sales. That's an increase of $201 million, or 30 basis points, compared with the prior year. The improvement in margins was driven by favourable pricing and higher volumes, though greater product coverage costs and compensation expenses partially offset it. Selling, admin and research expenses were up $154 million, or 15%, since we continue to invest in developing new products that will fuel future growth, and also due to higher variable compensation costs. Income from our joint ventures increased by $25 million, which reflects a gradual rebound in Chinese demand off a low base in 2022. Other income reached $50 million, up $17 million versus a year ago, mainly because we recovered technology fees from customers during the fourth quarter. We incurred $92 million in interest expense, which is an increase of $5 million compared to the previous year, driven by higher rates on the floating rate portion of our debt. For the fourth quarter, our all in effective tax rate came in at negative 13.3%, largely due to non-deductible costs associated with the regulatory settlement. The quarter's all in net loss was $1.4 billion, equivalent to negative $10.01 per diluted share. That figure includes $2.04 billion, or $13.76 per diluted share, in costs related to the regulatory settlement, along with $42 million, or $0.22 per diluted share, in costs from the voluntary retirement and separation programs, and $33 million, or $0.17 per diluted share, in costs from the planned separation of Atmus. We saw $1.5 billion come in through operating cash flow — that's $642 million more than what we recorded in last year's fourth quarter — driven by solid earnings and a less significant build in working capital throughout the business. Looking at all of 2023, revenue reached an all-time high of $34.1 billion, up 21%, which works out to $6 billion more than the prior year, thanks to a full twelve months of Meritor contributions along with robust organic growth. North American sales were up 22%, and international sales increased 20%. Within those totals, organic growth accounted for 12%, supported by improved pricing, heavy worldwide appetite for power generation offerings, sustained momentum in the North American truck segment, and a gradual recovery in China's economy. For the year, EBITDA came in at $5.2 billion, which equals 15.3% of sales for 2023. That's up $1.2 billion, or 110 basis points, from the prior year. Several things drove the increase in EBITDA percent: higher volumes, favourable pricing and logistics costs, and a modest and favourable mark-to-market impact from investments that underpin our company-owned life insurance plans. Higher compensation expenses partially offset all of that. All in-net earnings were $735 million, or $5.15 per diluted share, compared to $2.2 billion, or $15.12 per diluted share, a year ago. Within 2023's net earnings, you'll find three sets of charges. First, there's $2.04 billion tied to the regulatory settlement — that works out to $13.78 for each diluted share. Then there's $100 million connected to spinning off Atmus, equal to $0.54 per diluted share. Finally, the voluntary separation programs we rolled out in the fourth quarter added $42 million, which comes to $0.22 per diluted share. As for cash generated by operations over the full year, we hit a record $4 billion inflow — twice what we saw the prior year — driven by stronger operating income and a significantly smaller buildup of working capital companywide. For 2023, capex came to $1.2 billion, which matched what we had projected and represents a $297 million bump over 2022. That reflects our ongoing spending on fresh products and capabilities meant to fuel growth, especially those tied to fuel agnostic platforms in our core business. Over the long term, our goal is to return at least 50% of operating cash flow to shareholders, and if you look at the past 5 years, buybacks and dividends together equaled 56% of operating cash flow. In 2023, our capital allocation priorities centered on organic investments and raising the dividend — we returned $921 million to shareholders via the dividend — plus reducing debt following the Meritor acquisition. At present, we anticipate that our cash deployment priorities for 2024 are going to be the same as they were a year ago. Now I'll go over the 2023 operating segment results and give guidance for 2024. Should I need to repeat this, I will: the figures I'm about to cover from here on omit the costs tied to the Atmus separation, the costs linked to the voluntary retirement and separation, and the costs connected to the indefinite suspension of our operations in Russia during 2022. Revenues for the Component segment reached a record $13.4 billion, which is 38% above the previous year. EBITDA came in at 14.4% of sales versus 14.2%, up $540 million, or 40%.
Mark Smith
executiveLooking ahead to 2024, our components business should see total revenue decline somewhere between 2% and 7%, with EBITDA margins landing in a range of 13.9% to 14.9%. Turning to the Engine segment, revenues in 2023 rose 7% to hit a record $11.7 billion, while EBITDA came in at 14.1% of sales versus 14.3% the prior year. Measured in dollars, that EBITDA figure grew $74 million, which works out to 5%. For 2024, we forecast the engine business's revenues will fall 2% to 7%, reflecting an anticipated softening in the North American heavy-duty truck market, probably during the back half — or most notably in the latter six months of the year. Projected 2024 EBITDA falls within a 12.5% to 13.5% range. Over in the distribution segment, revenues climbed 15% versus the prior year to a record $10.2 billion, and EBITDA rose by 28%, improving as a share of sales to 11.8% from 10.6% a year earlier. For the full year, we anticipate distribution revenues somewhere between a 3% decline and a 2% gain, with EBITDA margins ranging from 11.4% to 12.4%. As for the power system segment, revenues also set a record, reaching $5.7 billion — 13% above last year. EBITDA was 14.7%, which is 250 basis points better than 2022, helped by favourable pricing, robust volume and certain cost reduction efforts. During 2024, we look for Power Systems revenues to range from down 3% to up 2%, with EBITDA between 15.2% and 16.2%. Accelera's revenues grew $354 million in 2023, alongside a net loss of $443 million at the EBITDA level. For 2024, we expect Accelera revenues — and we now anticipate that Accelera revenue will rise in the range of $450 million to $500 million — with net losses narrowing to somewhere between $400 million and $430 million, as we keep making targeted investments in future technologies while also improving how our current products operate. At present, we project 2024 company revenues will decline 2% to 5%, and company EBITDA margins should fall in the range of 14.4% to 15.4%. Our effective tax rate for 2024 is expected to come in at approximately 24%, not counting any discrete items. Capital investments are likely to land somewhere between $1.2 billion and $1.3 billion, since we keep making critical investments that support future growth. To sum up, we turned in record sales and solid operating profits during 2023. Cash generation has been — and will remain — a major priority as we move into 2024, letting us keep investing in new products even amid economic uncertainty, while also returning cash to shareholders and keeping our balance sheet strong. As Jen mentioned, we do anticipate moderation across several key markets in 2024, particularly in the US truck market, which our guidance reflects. We've already acted to cut costs across the business, and we're well positioned to ride out the economic cycle and enhance our cycle-over-cycle performance in 2024. Assuming our mark-to-market requirements are met, our plan is to separate the rest of our stake in Atmus by way of an exchange offer, which would be the next stage of the separation as we work to reshape our portfolio going forward. Under the proposed exchange offer, holders of common stock would be able to choose whether to swap all, a portion, or none of their Cummins shares for Atmus common stock, in each case subject to the offer's terms. When exactly we decide to kick off an exchange offer will, as we said before, hinge on market conditions, though the tender could be launched in as little as a few days. Our Cummins guidance for this year takes into account Atmus being part of our consolidated results for all of 2024 and leaves out any separation-related costs or benefits. Cummins should benefit from having fewer shares outstanding once the exchange closes; we'll revise our guidance when the separation is finished. We appreciate your interest today; I'll now hand things back to Chris.
Chris Clulow
executiveMark, thanks. To be fair to everyone else on this call, I'd request that you keep it to a single question plus one follow-up that's connected to it. Should you have another question beyond that, kindly get back in the queue. Operator, let's take our first question.
Jerry Revich
analystYes, hello. Good morning to all of you. Jennifer, Mark, Chris — typically, whenever you guys introduce fresh engine rules, we usually observe improved margins coming from your side. I realize we are 2 years away from the 27 regulations, but could you just offer a few high-level remarks? It seems the typical selling price for the engine might increase twofold, considering that warranty cost embedded there, and I'm curious whether you'd address that, and then in a general sense just discuss the boundaries of how you anticipate this situation to unfold for your company relative to the margin gains we've witnessed during earlier emissions cycles in which you folks boosted the value you provide. Thanks.
Jennifer Rumsey
executiveYeah, I appreciate that inquiry, Jerry. As you have observed from us previously, when we introduce products under fresh emissions rules, generally there is a content rise, naturally, and beyond that we aim to generate value for our clients and find a chance to set prices suitably with them. Thus we intend to keep doing so when we bring out new products, especially these fuel agnostic engine platforms. Naturally, we also generally encounter an increase in our warranty expenses since we start accruing at an elevated rate before we have shown the capability of that platform. That is the additional element to monitor when we introduce those products, yet what you observe us doing at present is truly concentrating on enhancing operational performance of the company, along with putting money into the essential platforms for the future that we think will deliver value to our clients and place the enterprise for profitable expansion.
Jerry Revich
analystAll right, great. Then, on a different note, since logistics expenses ran high across the industry during 2023, could you say something about how your current labor hours per unit compare with what's typical? And how much of a potential lift could that provide compared with the guidance?
Chris Clulow
executiveYes, Jerry, I'd say that throughout 2023, we've kept generating greater and greater efficiency. A number of the supply chain disruptions we've dealt with are starting to smooth out, our on-time delivery performance is improving, and that lets us achieve greater efficiency at our plants; so my sense is we keep seeing that as we move through the back half of the year. As we anticipate — both Jen and Mark brought this up — volumes, especially in North America heavy duty truck, easing somewhat and moderating somewhat, we're able to keep generating those efficiencies; so my sense is the cost per labor hour keeps improving, and I'd describe overall labor costs as having more or less flattened out. As you're aware, we had an extended stretch in which they climbed, and over the past six months that has calmed down and turned much flatter.
Mark Smith
executiveSure, I'd say over the short term, there's somewhat more worry regarding what's happening in the Middle East, along with certain shipping holdups and a partial undoing of the direction we've been seeing with logistics expenses, which for us had genuinely been declining, Jerry. I don't want to make too much of that — clearly it's a bit of a worry over the short term.
Tim Thein
analystI just want a small point of clarification. Regarding what was mentioned about North American on-highway engine deliveries, I believe you stated 140,000, which is a decline of 5% to 10%. Was that figure in reference to the entire North American heavy and medium duty sector, or were you only talking about heavy duty?
Mark Smith
executiveYes, for medium duty, Tim, ours was a decrease — somewhere between down 5% and flat — which works out to 140,000 to 150,000. As for the heavy duty sector, we project a drop of 10% to 15%, and that represents our full-year guidance.
Jennifer Rumsey
executiveLet me add a bit of context here. I'd call this a cycle unlike most others, because during the '21 and '22 period, supply constraints kept the industry from completely satisfying customer demand, and that situation got better as 2023 went along. The markets really hit their peak in the second quarter, then we experienced a modest decline during the second half, though landing at the top end of our guidance was less of a drop than what we had projected heading into Q1. Our backlogs remain solid — we feel particularly good about medium duty, and we'll keep monitoring developments. A shallow cycle is still what we expect, along with additional softening as we move through the back half of the year. That's how I'd characterize it — just some context to go with those figures.
Tim Thein
analystAll right, so I was wondering what that suggested regarding share of the market, though I can circle back with Chris afterward on that. Then the next item would be about what's implied for decrementals in the engine business during '24, and clearly with a figure in the high 30% range, JV income is definitely going to weigh on it. Rather than walking through each individual element, the parts headwind stood out sharply during '23 for Cummins, so I'm specifically interested in that component. You laid out the guidance for the off highway parts outlook, but regarding that and whatever else you might mention that bears on how margins for engines perform year over year, could you address it? Thanks.
Mark Smith
executiveYes, that's a fine question, Tim. What you left out was essentially our product coverage assumptions. No meaningful shift is anticipated by us, yet included in our guidance is somewhat greater product coverage, or warranty, expressed as a percentage of sales within the engine unit. How that unfolds remains to be seen, but that represents the additional element present that you failed to mention.
David Raso
analystHello, and thanks. This is more of a macro-level thing. I realize quite a bit of expense has been incurred, and you're squarely in the middle of what we might describe as a ten-year energy shift that carries substantial outlays. What I'd like to know is whether, when you project forward across the coming 1 or 2 years, there's a turning point where your expenses start to decline — and if there isn't, have you considered possibly a bigger cost reduction initiative? I'm aware of the separation program you mentioned, but I mean something potentially larger in scope, since compared with other companies we track, they've enjoyed a genuinely robust stretch of profitability over the last 2 years while your margin has faced more difficulty. So I'm simply wondering whether you anticipate anything ahead that meaningfully alters that — whether a cost turning point, or perhaps a step you've proactively taken — pardon me — a spending turning point that's coming down, or anything on the expense front you might be able to pursue. Thanks.
Jennifer Rumsey
executiveYes, David, thank you. I appreciate the question. To begin, I believe you referred to a ten-year energy shift — I'd simply add an S to make that ten-yearS shift, correct? This will require time. The truth is, when you examine our various markets and regions, that shift will require time to happen; however, we're currently in a stretch of truly peak investment within the engine business. Since we're putting money into these fuel agnostic engine platforms, we carry a significant commitment in R&D and capital to accomplish that; and we believe those engines will genuinely place us favorably with high efficiency diesel products as customers have chosen and keep choosing not to put money into their own platforms and instead to use Cummins, plus the fuel flexibility that will assist customers as they start to shift, whether that's natural gas or hydrogen-based engine solutions. Consequently, over the upcoming few years — until we introduce those platforms around the '26, '27 timeframe — we're experiencing elevated R&D levels on those products, and then, naturally, we're also in a stretch where we have somewhat reduced revenue alongside greater investments in the accelerator business, and we're pacing that investment according to how we perceive the market shifting. We're examining chances to share investments while retaining a leading solution, as you observed us do with the battery cell joint venture. As revenues increase, we enhance portions of those businesses and electrified components. We've by now delivered 1500 buses with Bluebird and are ramping up the electrolyzer that will assist in enhancing margin performance for the business there. One more point I want to make: just like Cummins has already been doing — and we'll keep doing — we're examining ways to make various areas of our operations better. After we bought the North America distribution business, we put dedicated money into lifting margin in that unit, and you can see the results show up in how distribution has performed. I mentioned the emphasis we placed last year, which began within our power systems business — that's also showing up in the numbers, along with the Meritor integration. We keep searching for opportunities to boost how well our business runs, while keeping an eye on what the market wants and what costs look like. That's why the voluntary staff cutbacks we made last year are helping us now, as revenue comes down somewhat this year. Taken together, all of this lets us keep raising what investors get back, even as we make sure we're putting money into the key products and technologies that matter going forward.
David Raso
analystOkay, thanks. I'll jump off in just a moment. Regarding how the North America truck declines will be spaced out over the year, could you give us some feel for that cadence, perhaps from an industry standpoint, and would your own declines follow a different pattern? Just thinking about the lead lag between inventory levels, how soon you ship, just trying to understand the cadence and how yours compares to the industry's. Thank you.
Jennifer Rumsey
executiveYeah, great; so, clearly, we do have some lead when it comes to supplying engines into truck build. That means our engine build rates will pull slightly ahead of truck build rates, but like I mentioned before, from a guide standpoint, we believe where we were running when the year closed will stay pretty steady through the first part of the year, and then we're projecting some softening toward the end of second quarter and into the second half of the year.
Mark Smith
executiveWhen you look at a medium-duty truck, honestly, the gap between those two isn't all that big. Then you factor in market conditions and hours, and once you get to heavy duty, that's the segment where we perceive somewhat greater market vulnerability, and we'd mostly anticipate tracking alongside the market.
Jennifer Rumsey
executiveThe final factor involves pickup, where a model transition is going to push Q4 volumes down along with pickup.
Angel Castillo
analystHi there, good morning, and thanks for taking my question. I'd like to dig a bit deeper into what that cadence looks like for the back half. I believe on the prior call you said aftermarket might have been signaling some softening, and I think you said results landed toward the upper end of what you'd expected, and that you saw that carrying over into the first six months. So with the way we're framing a slower second half, and now an outlook where aftermarket actually improves from roughly flat to up 5% for the full year, could you share what you're hearing from customers, any indications, or what underpins your confidence in that second-half deceleration as we look at the year?
Mark Smith
executiveYeah, I'll take a crack at it — first shot at answering. To start, on the aftermarket side, we experienced something quite pronounced, some degree of de-stocking, or softer output, in the parts where demand is lower during Q4, and we mostly chalk that up to customers managing their cash flow. Our expectation isn't that this persists as a trend. On parts, we look for a rebound off Q4 levels and a fairly consistent pattern throughout the year; as for truck builds, well, naturally, you've already heard from the bulk of our large customers. So beyond noting that the truck backlog has been gradually drifting lower, there really isn't much else for us to add, and what raises a wider worry for us is spot rates along with the financial health of the folks operating truck fleets. That's the main thing troubling us. It isn't our OEM customers, and at present both the backlog and the orders are still holding at pretty solid levels; the issue is what's going on with the economics underneath freight activity. That's the source of our worry — taken together with the heavy duty backlog that's been steadily easing, since it hasn't been trending favorably. So at this stage it's not the sort of sharp slump we may have witnessed in earlier cycles, but those elements are feeding into how we're thinking, and I'd say our guidance isn't any more cautious than anyone else's, and beyond that, honestly, we don't have further observations.
Angel Castillo
analystUnderstood. That helps, and perhaps turning to Accelera, I'd like to dig into it a bit more—I'm wondering what backlog patterns you're observing between Q3 and Q4, and as you fulfill at least the electrolyzer orders across the coming 12 to 18 months, could you describe the rhythm of profitability for that segment? As we finish 2024 and deliveries on those ramp up, what do you anticipate the exit rate for that profitability might look like?
Jennifer Rumsey
executiveYes—right now we remain in a stretch of fairly substantial spending across the Accelera companies, which are genuinely committing both R&D and manufacturing capital to expand the product, and we're lucky to have current facilities and data we can put money into for that purpose, so we can start building electrolyzers, and demand keeps rising while the backlog sits, as I mentioned, at a record high for electrolyzers. So output volume will start expanding, and afterward you'll observe margins in the electrolyzer side of the operation getting better as revenue increases and we move that backlog out to buyers. The same applies to our electrified components operation as revenue there rises. Margins will improve as well. One item we've now folded into our 2024 spending, naturally, is starting to put capital into the battery cell joint venture, and we regard that as an essential investment we're undertaking jointly to guarantee a top-tier cell for commercial vehicles right here in the U.S., plus domestic supply, which lets both us and our customers benefit from the incentives on offer and guarantees supply security going forward in this market.
Rob Wertheimer
analystHi there. I was wondering if you could offer some perspective on what's happening right now in the data center and large engine space. Obviously, things are very strong there. I don't really know how far out your visibility extends, or what the shape of that market is. Your biggest competitor came out and said they're adding capacity. I'm not sure where your own capacity stands, or how much runway you have to expand into that market, assuming it's a curve that runs over multiple years. So I'd appreciate it if you could give us some sense of what's going on with the dynamics there.
Jennifer Rumsey
executiveThe data center sector is definitely a thrilling area for expansion. For a number of years now, we've seen a pattern driven by more cloud adoption, storing data in the cloud, and more recently by artificial intelligence and other kinds of investments. Demand remains extremely robust. Our guidance was raised to a range of 10% to 15%. The backlog in that market is incredibly solid. We're examining our production capacity to ensure we can keep up with what the market needs, and we feel confident about the products we're offering. Naturally, that business — along with our push to enhance its fundamental performance — will benefit us as that market keeps growing.
Mark Smith
executiveProbably the clearest secular trend over the next couple of years.
Jennifer Rumsey
executiveI don't. Yeah, I think it will continue.
Rob Wertheimer
analystThen, is there space for expansion during '25 and '26? I'm not certain about your capacity situation, but it appears you likely are being requested to provide quotes or consider a capacitor that distant, correct.
Jennifer Rumsey
executiveYes, I'll simply state that we anticipate the data center market's growth pattern will persist, and we are—and will keep—examining our capacity and the way we position ourselves to satisfy that demand.
Rob Wertheimer
analystAll right. That's great. I'll leave it there. If I could squeeze in one more question about medium duty — there's a story out there that when COVID limited production, OEMs gave priority to the large class segment rather than medium duty, and that shows up to some degree in the industry forecasts in your outlook. I'm just curious whether medium duty has stronger underlying demand than that, with interest rates or other factors providing a boost, or whether that's roughly where the market sits, fairly flat? I'll leave it there.
Jennifer Rumsey
executiveYes. The OEMs definitely dealt with quite a few supply chain constraints that carried on through '23 and even into the early portion of this year, frame rails especially. So, as you saw, we really anticipate the medium duty market holding fairly flat compared with its current level. It's very strong; naturally, we hold a strong position in that market, and we're observing ongoing demand plus pent-up demand from certain customers in that market for our product; so it comes up less often there than in heavy duty.
Tami Zakaria
analystHello, and good morning. I appreciate you taking my question. At your previous Analyst Day, I believe you laid out scenarios for DV <<inaudible>> adoption. I understand you'll be holding another Analyst Day this year, but as things stand right now, which of those two scenarios—the faster one or the slower one—looks more probable? And in your view, how does that influence the Accelera goal of between $6 billion and $13 billion in revenue by 2030? Is there anything new on that front?
Jennifer Rumsey
executiveYes, as you mentioned, during our last Analyst Day we presented both a lower and a higher scenario regarding adoption, and you should anticipate that we will update our perspective on this when we get to the Analyst Day in May. What I'd say is this: certain regulations and incentives are contributing to the beginnings of momentum behind that adoption, and our thinking is that it may lean more toward the lower end of those scenarios, and we keep examining how we pace our investment so that we're handling it consistently with the way we expect adoption to actually unfold.
Tami Zakaria
analystUnderstood. So let's say things tilt more toward the slower scenario — would that put a damper on the Accelera targets you've set, or have some kind of negative or slowing effect?
Jennifer Rumsey
executiveYes, we'd still be inside the range we provided at the Analyst Day, in line with those scenarios we laid out, and keep in mind that a big chunk of that 2030 revenue for Accelera comes from growth in the electrolyzer business too.
Noah Kaye
analystThank you very much. To begin, one administrative item. I'm attempting to grasp how cash flow will behave as we close out the year, along with the leverage situation. Clearly the settlement has some effect on that, but you normally aim to give back 30% of cash flow to shareholders. What's our thinking on capital returns for this year, and roughly where do you want leverage to land by year-end?
Mark Smith
executiveYes, so good morning, Noah; we're going to kick off the year holding the same position we did a year ago, putting money into the business, prioritizing the dividend and doing a bit more de-levering; that's how we enter the year; we'll keep assessing that alongside our board as the cycle plays out. That's at least where we stand initially. Naturally, some of our, during years when cash generated exceeded what we required, we handed back considerably above the 50% in any particular year, but regardless, we believe this is the right course at present until we learn a bit more about the cycle.
Noah Kaye
analystOK, so by the time we reach the close of the year, you're anticipating bringing leverage down.
Mark Smith
executiveThat's right.
Noah Kaye
analystAlright. And next, the guidance for China truck looks somewhat broad. Could you walk us through the bottom and top ends of that range, in terms of what scenarios you have in mind? Does the top end depend on stimulus? Take us through what you're observing and what you're assuming.
Chris Clulow
executiveYes. That essentially mirrors how little visibility we have, correct? So we're starting from an extremely soft base, yet the market still hasn't given clear signals about what will actually unfold. So we can construct a scenario. It's difficult for me to imagine a scenario significantly below where we stand now, but the general pace of the economy remains sluggish, and so that upside does leave room for something unforeseen on the stimulus front, which has occurred occasionally in China, but we lack sharp insight at this moment. The outlook is murky and OEMs don't have quite enough conviction yet; we're performing well with our customers, rolling out additional products. We're optimistic about continuing to outgrow the market in China, both in consolidated revenues and in how the JVs perform. We're fully positioned to outperform. We simply need a bit of support from the broader market, but it isn't as concrete as we'd prefer at the beginning of the year. Naturally, we'll examine the same data points and give you an update. With luck, by the close of Q1, we usually develop a firmer view of the. And that's all from me for the remainder of the morning.
Jennifer Rumsey
executiveChris and I will answer the rest of the questions.
Chris Clulow
executiveWe'll see how much it clears on China.
Michael Feniger
analystYeah. Thanks, folks, for fitting me into the schedule. The share count has basically been level, maybe creeping up a touch. In the release, there's a remark about prioritizing lowering debt and paying dividends. Could you lay out what the priorities look like for 2024? I recall Mark bringing up Atmus, and I also picked up on buybacks. Maybe you could restate how we ought to frame Atmus for 2024 as time goes on, along with the various positives and negatives involved.
Mark Smith
executiveClearly, the biggest effects from Atmus running on its own will be that they'll head out independently to chase their growth plan, and with this last move, Cummins shares will be swapped — investors will give up Cummins shares and receive Atmus shares instead. So assuming that exchange goes through, our share count drops. The reason the count here over the last 18 months has stayed steady or edged upward comes down to us halting buybacks too. Following the Meritor acquisition, we brought leverage down, something we'd been signaling to investors. A bit more debt reduction remains, and after that we'll keep assessing what chances we have to deliver the strongest returns for investors, whether that's growing organically or handing back more capital, but that's essentially how it will play out. Upon separation, the share count decreases.
Michael Feniger
analystUnderstood; and Mark, I'd like to let you rest and recover. Just a fast one for you regarding Meritor, I believe '23, I believe revenue was roughly $4.8 billion, perhaps EBITDA slightly over $500 million. Just when we consider the '24 guidance on components, is there anything you can assist us in breaking down concerning how that Meritor in '23, how that sort of moves in '24 compared with your total components guidance? Thanks all.
Mark Smith
executiveUnderstood. And I'll mention that I feel better than I sound, and that's mostly due to the record cash flow. So please, as I mentioned at the beginning, don't interpret anything from my cracking voice. Meritor hit the targets we set for this year; it isn't a standalone segment. We gave that information for the initial complete year for the sake of transparency to ensure investors had a sense of how we were performing following a somewhat rocky beginning when we initially bought Meritor. So all of that is included in the guidance, but it's fair to say we have additional gains in Meritor as we head into 2024 and we're extremely happy with how the team is performing there, Ken Hogan and his team. So we're thrilled about that moving forward. So thank you. Thanks everyone. Appreciate it.
Chris Clulow
executiveThanks, everyone. That brings today’s teleconference to a close. I’m grateful that all of you joined and for the ongoing interest you’ve shown. Like always, our Investor Relations team will be around to take questions once the call ends. Take care.
Operator
operatorThanks. That brings today's call to a close. At this point you're free to hang up, and we appreciate your joining us.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Cummins Inc. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.
Get the API View API docs →This call discussed
For developers and AI pipelines
Programmatic access to Cummins Inc. earnings transcripts and 132,000+ others is available through the
EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments,
full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.
More tools for stock research
OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Cummins Inc. or any ticker on your watchlist.
StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.