Cummins Inc. (CMI) Earnings Call Transcript & Summary

November 6, 2025

New York Stock Exchange US Industrials Machinery earnings 61 min

What were the key takeaways from Cummins Inc.'s November 6, 2025 earnings call?

In Q3 2025, Cummins Inc. reported revenues of $8.3 billion, a 2% decline year-over-year, primarily due to a 40% drop in North American heavy and medium-duty truck demand. EBITDA was $1.2 billion, reflecting a margin of 14.3%, impacted by $240 million in noncash charges related to the electrolyzer business. Management anticipates continued weakness in North American on-highway markets through year-end but expects strong demand for power generation equipment to persist, signaling cautious optimism for recovery in 2026.

What topics did Cummins Inc. cover?

  • North American Truck Demand Decline: Cummins experienced a significant decline in North American heavy and medium-duty truck demand, with unit volumes down 40% year-over-year. Management noted, "We expect the near-term weakness in North America on-highway truck markets to persist at least through the end of this year."
  • Power Generation Demand Strength: The company reported strong performance in its Power Systems and Distribution segments, driven by rising demand for backup power for data centers. Jennifer Rumsey stated, "We continue to see strong demand for power generation equipment beyond this year."
  • Electrolyzer Business Challenges: Cummins faced significant challenges in its electrolyzer business, leading to $240 million in noncash charges. Management is undergoing a strategic review due to "lower demand expectations due to reduced U.S. government incentives and slower market development internationally."
  • Tariff Impact and Recovery: The company reported an increase in tariff costs, impacting profitability, but noted improvements in cost recovery through pricing actions. Mark Smith mentioned, "The proportion of tariff costs recovered through pricing and other mitigation actions in the third quarter increased sequentially."
  • International Revenue Growth: International revenues increased by 2%, with notable growth in China where revenues rose 16%. This was attributed to "stronger unit demand driven by NS4 scrapping incentives," indicating a resilient global market.

What were Cummins Inc.'s November 6, 2025 results?

  • Revenue: $8.3B (vs $8.5B est, -2% YoY)
  • EBITDA: $1.2B (vs $1.4B last year, 14.3% margin)
  • Net Earnings: $536M (vs $809M last year, $3.86 per diluted share)
  • Operating Cash Flow: $1.3B (vs $640M last year)
  • North America Truck Unit Sales: 16,000 (down 38% YoY)
  • International Revenue Growth: 2% (vs 0% last year)

Cummins' Q3 results reflect a mixed performance, with strong power generation demand offsetting significant declines in truck sales. The company's strategic focus on operational efficiency and capacity expansion in growing segments positions it well for future recovery. Investors should monitor the evolving regulatory landscape and demand trends in both the truck and power generation markets as key indicators of performance moving forward.

Earnings Call Speaker Segments

Nick Arens

executive
#1

Thanks, Maria. Hello, everyone, and thanks for joining today's call to go over Cummins' results for the third quarter of 2025. Here with me are Jennifer Rumsey, our Chair and Chief Executive Officer, and Mark Smith, our Chief Financial Officer. All of us will be on hand to take questions once the teleconference wraps up. Before we begin, please keep in mind that certain information you hear or receive today will include forward-looking statements as defined under the Securities Exchange Act of 1934. Those statements convey our forecasts, expectations, hopes, beliefs and intentions concerning future strategies. Actual results we see down the road could differ materially from what those forward-looking statements project, given various risks and uncertainties. You can find more details about those risks and uncertainties in the forward-looking disclosure statement included in the slide deck and in our filings with the Securities and Exchange Commission, especially the Risk Factors section of the most recently filed annual report on Form 10-K along with any quarterly reports on Form 10-Q filed afterward. Throughout this call, we'll also touch on certain non-GAAP financial measures, and we'll point you to our website for the reconciliation of those measures to GAAP financial measures. Our press release, which includes a copy of the financial statements, and a copy of today's webcast presentation can be found on our website in the Investor Relations section at cummins.com. With all of that covered, I'll hand things over to our Chair and CEO, Jennifer Rumsey, to get us started.

Jen Rumsey

executive
#2

Appreciate that, Nick, and hello everyone. To kick things off, I'll recap our third-quarter accomplishments and the way our financial results landed; next, I'll go through sales and end-market developments market by market. Following that, I'll brief you on how we're navigating the changing trade and policy landscape, along with what we expect from the market through the remainder of the year. Then Mark will take you through more detail on how we performed financially in the third quarter. But before we get into the figures, let me take a moment to highlight a few notable wins from the third quarter. In September, we unveiled a partnership with Komatsu focused on creating hybrid powertrains for heavy mining equipment used in surface haulage. Through this collaboration, we'll leverage the worldwide reach and size of both Komatsu and Cummins to speed up the creation of refined hybrid solutions for mining. By retrofitting hybrid options, mining clients could potentially advance their efforts to cut carbon emissions right away, all while reducing what it costs to run the equipment they already own. This chance to connect present-day operational requirements with tomorrow's lower-carbon objectives, in support of what our customers are doing for sustainability, is something we're thrilled about. On top of that, the 15-liter engine we've just released delivered excellent performance at this quarter's Run on Less — Messy Middle event, put on by the North America Council for Freight Efficiency. During the demonstration, three out of the thirteen fleets involved put the new X15N natural gas engine through some of the toughest duty cycles, proving it can deliver genuine heavy-duty capability while also providing the cost and emissions advantages that come with natural gas. At that same event, our X15 diesel came out on top for fuel economy and operational efficiency, cementing its standing as the standard for reliable, high-performance power. These outcomes demonstrate that Cummins' technologies are being adopted more and more, and that customers are seeing real value from our advanced powertrain solutions, all of which are manufactured in the U.S. I'll now discuss how the company performed overall in the third quarter of 2025 and go over a few of our key markets. For Q3, our top line was $8.3 billion, which represents a 2% decline from the same period in 2024. The drop in revenue was driven primarily by softer demand for heavy and medium-duty trucks in North America, where unit volumes dropped 40% year over year. That decline was mostly offset by ongoing momentum in global power generation markets, increased light-duty truck volumes, and favorable pricing. EBITDA was $1.2 billion, or 14.3%, versus $1.4 billion, or 16.4%, in the prior-year period. Results for the third quarter of 2025 included $240 million in noncash charges tied to our electrolyzer business in the Accelera segment, reflecting reduced demand expectations stemming from lower U.S. government incentives and slower market development internationally. If you set those charges aside, EBITDA came in at $1.4 billion, which works out to 17.2% of sales. That's up 80 basis points compared with the same period last year. The gains came from stronger power generation and light-duty truck volume, better pricing, operational efficiencies, and reduced compensation expenses — and those were enough to outweigh both the drop in North American truck volumes and the negative hit from tariffs. During the third quarter, we offset a bigger portion of tariff costs than we had in the second quarter by increasing prices and pursuing other mitigating actions. Even with that, our total tariff costs rose from Q2, which is exactly what we had expected, and the overall impact on Cummins was worse than it was a year earlier. Third-quarter revenues in North America declined 4% relative to 2024. During Q3, the heavy-duty truck sector's output was 46,000 units — 34% below what we saw in 2024. We sold 16,000 heavy-duty units, representing a 38% year-over-year decrease. For medium-duty trucks, third-quarter 2025 industry production hit 20,000 units, down 51%, and our sales were 17,000 units, a 55% decline versus 2024. In Q3 2025, we shipped 40,000 engines to Stellantis for their Ram pickups — a 44% gain compared with 2024, thanks to the ramp-up of model year '25 product that debuted earlier this year. North America power generation equipment revenue climbed 27%, driven by ongoing strength in data center demand. Looking at our business outside the U.S., revenue for Q3 2025 came in 2% higher than the same period twelve months earlier. In China, third-quarter sales including joint ventures hit $1.7 billion, a 16% gain over an extremely soft quarter the prior year — the result of better unit volumes being partially canceled out by an unfavorable product mix and softer parts sales. Medium- and heavy-duty truck demand across Chinese industry amounted to 311,000 units, which is 50% above last year's figure. Our own sales and units, joint ventures included, totaled 41,000, marking a 35% rise. The expansion of China's market was primarily driven by domestic demand that surpassed expectations, fueled by NS4 scrapping incentives. During Q3, demand from Chinese industry for excavators reached 54,000 units, which is 22% higher than 2024 levels. Including joint ventures, we sold 9,000 units — up 18%. Growth in the size of the China market is mainly being fueled by rural development domestically and small infrastructure projects, plus robust export demand. In China, power generation equipment sales climbed 26% in the third quarter, driven by accelerating demand from data centers. India's third quarter revenues, including joint venture, came to $713 million, a 3% rise versus a year ago, since stronger demand across markets was partly offset by the rupee depreciating against the dollar. On the industry side, truck output was up 6% versus 2024, and our shipments grew 8%, mostly because domestic demand came back and customers bought ahead of possible changes to the goods and service tax rate. In Power Generation, revenues climbed 41% during the third quarter, fueled by robust demand from data centers. Taking it all together, we posted strong results, with record performance in our Power Systems and Distribution segments, though those gains were offset by steep drops in North America heavy- and medium-duty truck demand, which weighed on our Engine and Components businesses. Looking ahead, we anticipate that the near-term softness in North America on-highway truck markets will continue at least until the end of this year. For every on-highway use across North America, we're expecting unit volumes to fall roughly 15% versus what we saw in the third quarter, and the bulk of that drop should come from light- and heavy-duty trucks. What's behind it is a bit of normalization in light-duty trucks following a big Q3 surge tied to new model production, plus fewer working days in the quarter and ongoing softness in heavy-duty trucks. We think Q4 on-highway engine output might represent the trough of this cycle, but how quickly these markets bounce back hinges on general economic mood and how clear trade and regulatory policy becomes. Near-term hurdles persist in our shorter-cycle markets, yet demand for power generation equipment stays robust well past this year. The trade and policy environment worldwide keeps shifting, which means continuous difficulties for our whole industry. Tariff expenses, as we expected, were higher in the third quarter. We're close to fully recovering the tariffs that were announced before Q3, and right now we're evaluating what additional effects might come from the newer announcements, such as the Section 232 proclamation covering medium- and heavy-duty vehicles; on the whole, we think we're in a solid position to serve our customers and keep the U.S. economy moving, thanks to our long-standing approach of building products in the U.S; for the U.S. market. Heightened geopolitical friction might also threaten semiconductor supplies and other goods that rely on rare earth minerals, which could hit our supply chain and industry output more broadly. Through this year so far, we haven't seen major interruptions to production, and we're keeping a close watch on this changing situation while taking action to reduce risk wherever possible. U.S. government incentives aimed at encouraging green hydrogen adoption have been cut back, and market development in certain international regions has been slower than we expected, which together have driven a substantial decline in demand for our electrolyzer products. Because of that, we're conducting a strategic review of our electrolyzer business to determine the best way forward, and additional charges could arise as we deal with a very weak demand outlook. As I've described, 2025 has brought major difficulties for our industry, forcing us to concentrate even harder on containing costs and mitigating risk than we had planned when the year began. Our seasoned leadership team and committed workforce have labored relentlessly to steer through these conditions while also seizing the rising demand for power generation equipment and delivering a major improvement in company performance from one cycle to the next. Looking ahead, we're optimistic that international trade rules will calm and that the government's evaluation of the 2027 EPA rules finishes up in the coming months. That kind of certainty is hugely important for our sector, and it will support our plan to bring back 2026 guidance in February. With that, I'll turn it over to Mark.

Mark Smith

executive
#3

Thanks, Jen, and good morning to all of you. We posted robust results in what's best characterized as a split-screen economy, definitely within the U.S. The main points today are these: first, business trends during the third quarter unfolded just as we outlined in broad terms 3 months back. Demand across our Power Systems and Distribution segments is still quite robust, partly fueled by growing need for backup power at data centers. U.S. truck production, conversely, decelerated dramatically, with our heavy- and medium-duty truck engine shipments falling 27% versus the second quarter — squarely within our lackluster forecast of a 25% to 30% decrease. Our margins came in solid, as sales growth in Power Systems and Distribution translated into EBITDA margin expansion, and cost containment efforts throughout the company helped cushion the blow from shrinking U.S. truck volumes. And third, just as we anticipated, tariffs' adverse effects kept intensifying during the third quarter; even so, we offset the net damage to profitability via price recovery and other measures, and the share of cost recovery rose sequentially in the third quarter. Fourth, operating cash flow was robust at $1.3 billion for the quarter. Amid these highlights, it bears repeating that we're continuing our history of significantly enhancing performance cycle over cycle. Now let's examine our results a bit more closely. Revenues came to $8.3 billion, a 2% decline versus a year ago. North American sales fell 4%, whereas international revenues rose 2%. EBITDA stood at $1.2 billion, or 14.3% of sales, for the quarter, versus $1.4 billion, or 16.4% of sales, a year ago. Third quarter 2025 results encompassed $240 million in noncash charges tied to our electrolyzer business in the Accelera segment. Barring those charges, EBITDA was $1.4 billion, or 17.2% of sales. The elevated EBITDA percentage, once noncash charges are excluded, stemmed from greater power generation demand and light-duty truck volumes, pricing, robust operational efficiencies and reduced compensation expenses — all partly counterbalanced by weaker North American truck demand and tariffs' unfavorable effect; now I'll walk through — provide a bit more detail line by line. Gross margin for the quarter reached $2.1 billion, or 25.6% of sales, versus $2.2 billion, or 25.7% of sales, last year. The 2025 margins encompassed a $30 million noncash charge for inventory write-downs tied to our electrolyzer business, which formed part of the previously referenced noncash charges for Accelera. Once those charges are excluded, gross margin percentage was 26%, up from the prior year owing to greater power generation demand and light-duty truck volumes, pricing, operational improvements — all of it offsetting negative truck and tariff impacts. Selling, admin and research expenses totaled $1.1 billion, or 13.6% of sales, versus $1.2 billion, or 13.8% of sales, and demonstrated robust cost control throughout the company. Joint venture income of $104 million rose $5 million from the prior year. Higher China volumes in our Engine and Power Systems segments drove this gain, and that was the main factor. Other income fell to negative $186 million, versus $22 million of income the year before, largely because of a $200 million noncash goodwill impairment in the electrolyzer segment. Interest expense came in at $83 million, unchanged from the prior year. The all-in effective tax rate for the third quarter was 32.7%, and that figure included $36 million, or $0.26 per diluted share, of additional tax expense tied to the One Big Beautiful Bill Act, stemming from a smaller foreign income deduction along with reduced research and development credits; we do expect cash benefits from the elections we make under this recent U.S. tax legislation, though the income statement effect in the current period was unfavorable. All-in net earnings for the quarter reached $536 million, or $3.86 per diluted share, versus $809 million, or $5.86 per diluted share, a year earlier. Accelera noncash charges totaled $240 million, or $1.73 per diluted share. If you set aside the Accelera charges and the effect of adopting the recent U.S. tax legislation changes, net earnings were $812 million, or $5.85 per diluted share, lower by only $0.01 despite a 40% drop in U.S. truck volumes. Operating cash flow came to $1.3 billion, compared with $640 million a year earlier; our credit metrics have improved considerably since we absorbed the Meritor acquisition, and we now enjoy greater flexibility for capital allocation. Let me now offer a few more comments on segment performance and the rest of 2025. Tariff costs weighed on every one of our operating segments. Given time constraints, I won't repeat that point 5 times as I go through each segment's results. Turning to the Engine segment, third quarter revenues were $2.6 billion, down 11% from a year earlier. EBITDA was 10%, lower than 14.7%, as softer North American and heavy-duty truck volumes, the expense and added overhead involved in investing in and deploying new engine platforms ahead of the 2027 emissions regulations, and somewhat weaker aftermarket sales were partly offset by greater volumes and pricing tied to the launch of updated products in light-duty markets, along with overall disciplined cost management. Components segment revenue was $2.3 billion, a 15% decrease from a year earlier. EBITDA was 12.5% versus 12.9% of sales the year before, as weaker on-highway demand in North America was partly offset by operational efficiencies, tight cost management, and lower product coverage costs. In the Distribution segment, revenues rose 7% from a year earlier to a record $3.2 billion, and EBITDA also set a record at 15.5%, compared with 12.5% of sales a year earlier, helped by higher power generation demand and stronger aftermarket earnings; in the Power Systems segment, revenues hit a record $2 billion, up 18% from a year earlier. We also hit a record for EBITDA dollars, at $457 million, and that went up as a share of sales, from 19.4% to 22.9%. The drivers were solid volumes — especially in data center applications — favorable pricing, and capacity expansions done efficiently to keep costs down. At Accelera, revenues rose 10% to a record $121 million, since higher e-mobility sales made up for part of the drop in electrolyzer installations. Our EBITDA loss, once noncash charges are excluded, came to $96 million, versus a loss of $115 million during the same period last year, which shows the benefit of a lower cost base from the steps we took in the fourth quarter of 2024. To sum up, we posted strong profitability in the third quarter thanks to better operational execution, robust demand in power generation markets, and pricing that more than covered the steep drops in North American truck markets along with negative tariff effects — though it should be said that none of these forces played out the same way in every segment. Tariffs hit us harder in the third quarter, but we've put in serious effort to lessen that hit, and we expect to go into the fourth quarter roughly at a price/cost neutral point on tariffs — at least those announced before the third quarter. Tariffs that keep being added and adjusted remain a source of difficulty. To sum up, our third quarter results highlighted Cummins' solid financial standing and its capacity to steer through persistent uncertainty. With our diversified portfolio and worldwide network, we're well placed to serve our customers and keep pushing performance gains cycle after cycle. As we've said, we look for demand in Power Systems and Distribution to stay strong through the fourth quarter and as we head into 2026. At the risk of sounding cautiously optimistic, my hope is that demand in North American on-highway markets is near a bottom in the fourth quarter, after a slowdown that has been drawn out and hard. We do expect engine shipments to on-highway markets to fall another 15% in the fourth quarter versus the third quarter; we're hopeful about reinstating guidance in February, since we have more — we hope we'll have more clarity on trade and regulatory policies, which hopefully will bring stability to the North American truck industry and the wider industrial economy. As those markets bounce back, we're confident we can build on this year's strong results and keep delivering value to shareholders. Now I'll hand it back to Nick.

Nick Arens

executive
#4

Thank you, Mark. <<operator_script>> Operator, we are ready for our first question.

Jamie Cook

analyst
#5

Nice quarter — congratulations. I suppose I have two questions. First, Mark, what's your thinking on Engine margins for Q4, and how do you handle covering tariff costs, or how should we frame margins? That's my first one. Then my second: when we look at Power Systems, the margins this quarter were clearly very strong. I'm just trying to work through how we should think about 2026 — can production be ramped further? What's your view on price versus cost? And Mark, do we need to lift the margin targets for Power Systems?

Mark Smith

executive
#6

Those are high-quality questions. We'll begin with the Engine business, and then Jen can weigh in on Power Systems. Yes, I believe the Engine business is contending with several things that create a great deal of complexity, correct? There's product changeover. We're getting ready, hopefully, to bring new platforms to market. We've incurred some extra costs. Parts saw some softness during the third quarter, and we have to keep that elevated engineering budget in place until the product launches are behind us. Even with all of that, they're accomplishing a great deal. The leadership team in the Engine business, across the whole company, is working hard to control their costs. Hopefully, we're nearing the low point. So yes, based on what I know today, I wouldn't anticipate a dramatically different result from the Engine business, though volumes will be lower in Q4. Obviously, volume is a temporary headwind because of short quarters and an inflated ramp-up, which we're excited about on the Ram pickup, and that will ease somewhat. But on the whole, hopefully, we're approaching the bottom as far as the pressures on the Engine business and Components go.

Jen Rumsey

executive
#7

Jamie, regarding power generation — clearly, we've witnessed very solid results coming from both the Power Systems and Distribution segments. Within Power Systems specifically, we've spent a couple of years on a mission to truly repair certain fundamental aspects of how that business performs, examining which offerings make sense to keep, figuring out how to make better use of our existing footprint, and becoming more deliberate about our market pricing approach. All of this happened while demand for power generation was rising extremely quickly, and we managed to put a modest amount — roughly $200 million — into expanding capacity, launching new products at what turned out to be precisely the right moment. So that operation has truly been humming across every dimension, so to speak, and generating incremental margins approaching 50%. What I'd say is that we remain dedicated to putting more money behind profitable growth within that business. Q3 gave us our highest ever order intake; therefore we believe demand is still robust, especially from data centers, and we'll keep investing where it's justified in capacity and products so we can grow profitably and lift business performance — however, I wouldn't anticipate that pace of incremental margin gains continuing as we move into the years ahead.

Angel Castillo Malpica

analyst
#8

Congratulations on yet another impressive quarter. Jen, I was hoping you might be able to elaborate a bit on those remarks you made moments ago regarding capacity additions. My sense is that right now, you're considerably ahead of where you expected to be at Investor Day when it comes to data center sales. And as you pointed out, the doubling of capacity for large diesel engines is already in motion. Even so, with demand having strengthened so considerably, might you walk us through the work or assessments happening behind the scenes to figure out whether there's a need or an appetite for additional capacity investment in large diesel engines or, maybe more importantly, whether you're exploring any option to broaden your natural gas engine offerings into larger engine sizes, so that you might pursue some of those prime power opportunities we're seeing for data centers as they look for alternative prime power speed-to-power solutions? So, any perspective you can offer on this longer-term backdrop, with demand as strong as it is at present?

Jen Rumsey

executive
#9

Yeah, so first off, I'd say we've really been focused on the capacity investment we talked about. Like you said, we're almost done with doubling our large engine capacity, and we've been heavily concentrated in backup power for data centers, using the products we sell today. I'm really happy with how the team has performed. We've kept ahead of schedule on expanding that capacity. We're reaching the finish line as the year comes to a close. And just to give you a sense, in 2024, for data center power generation, our total company revenue was $2.6 billion. About half of that came from Power Systems. About fifty percent of that was driven by DBU, since we offer something fairly distinctive there: engines, along with certain critical components and auxiliary items sold into that market, not to mention the channel. As a result, we see gains across both PSU and DBU. Looking ahead to '25, we anticipate revenue from the data center sector will climb somewhere between 30% and 35%. The ramp began in Q4 of last year, when we saw a solid increase, and it's carrying on through this year. So we should reach that complete run rate tied to the data center product expansion. That brings us to what you asked about next, which centers on the follow-up question: what comes after this? Is it worth investing more in other areas where we could grow capacity for our existing products, since we expect demand in those markets to stay robust? That's something we're actively exploring right now. When we look at what we already offer—say, engines built for peak shaving—should we put capital into prime power engines instead, or should we tilt toward natural gas engines? No decision has been reached on that yet. Even so, these are absolutely things we're weighing, and once we determine our next direction in the data center space, we'll continue to provide updates.

Mark Smith

executive
#10

Absolutely. And regarding the component technologies, we're making sales to additional customers too, which is rather similar to the narrative around the components business. So indeed, it's thrilling to be discussing investment that comes with visibility, along with the returns in that segment.

Angel Castillo Malpica

analyst
#11

That's really useful. Now, for my second question, Mark, regarding Section 232, can you assist us in putting a number on how big the gross headwind will be in 3Q and 4Q? Also, do you have any thoughts, or perhaps a way to set some boundaries, around the possibility of securing a rebate on engines built in the U.S. similar to what U.S. truck manufacturers have received, I believe? And what would the financial effect be if such a rebate came through, thinking about possibly 2026?

Mark Smith

executive
#12

I'll tell you, the very same questions you have are the ones I have. To make any prediction, we require far more specifics than what we possess right now. What I can tell you is that we are a robust engine maker at our U.S. facilities. That leaves us in a great spot to support our customers and guide them through. Honestly, while all this modeling matters in certain ways, when it comes to the real specifics, there are 5 or 6 questions where we need many more details before we could even work it out, much less share it. So here's my take: our footprint gives us a solid position, and throughout all of this we will stay a dependable partner for our customers. Our tone probably makes it clear that having stability ahead would be extremely, extremely beneficial. Setting aside a major economic downturn or what I would describe as a severe emissions transition, this ranks as the steepest drop in truck orders that a lot of you with long experience here have ever seen. Tariffs aren't the sole cause, yet they add to that uncertainty as well. So we're hoping for greater clarity, and even more importantly stability, though overall we sit in a decent spot; and we're attempting to resolve all of this together with customers and suppliers; it has placed enormous strain on everyone involved.

David Raso

analyst
#13

When we consider the gap between '25 and '26, what happened with Accelera creates a rather intriguing situation. At this point, what portion of the losses comes from electrolyzers? In what way should we view the steps that were taken, or rather the choice made regarding that business? To what extent could that shrink the losses between '25 and '26?

Mark Smith

executive
#14

Right. My take is that everything we booked this quarter — that largely noncash impairment charge — is mostly a goodwill write-down, which is disappointing, yet unavoidable considering the softer outlook. So, David, I'd put it this way: what we've done so far hasn't really — doesn't really shift where things are heading. Still, as Jen mentioned, we clearly have been examining, and will keep examining, additional moves we might make to slow how quickly losses are piling up. That piece accounts for under half of what the entire Accelera segment loses. But yes, keep an eye out for news from us about that.

David Raso

analyst
#15

All right. And steps that might assist in lowering that shortfall. I mean, as soon as you've settled on that write-down choice, my assumption is that tougher calls are unfolding out of view regarding expenses. Might those measures support 2026, or does a longer horizon apply when I consider the gap between 2025 and 2026?

Mark Smith

executive
#16

Measures come in various forms, yet we recognize that should demand be weaker, we're not — no one feels at ease remaining at the level of losses we currently face as demand conditions shift. So we're examining everything, and once we've reached a conclusion on this, we'll be open about it, but at this moment we're actively addressing it.

Jen Rumsey

executive
#17

From a strategic standpoint, it's reasonable to say that we keep evaluating the Accelera portfolio given how markets are shifting, the downturn taking place, and which technologies we believe have the best chance of succeeding. Then we put money into areas where we see a chance to position ourselves for the medium and long term, while also examining ways to cut losses elsewhere. At the close of last year, we carried that out in the fuel cell portion of the business, and we're still carrying out some of those changes. And as Mark mentioned, we're now turning our attention to electrolyzers.

Mark Smith

executive
#18

Calling the drop in our revenue forecast sharp and dramatic is a fair assessment, and it deserves a closer look, which we are carrying out at this very moment.

Rob Wertheimer

analyst
#19

I appreciate the feedback regarding strategy; that's quite useful. When it comes to natural gas, data centers, and prime power — clearly Cummins possesses highly effective nat gas platforms across various engines. So I'm curious whether you might offer a brief tutorial regarding what that involves? Does bringing it to larger engines represent a tough engineering problem? Is it that you require many hours of operation? Perhaps what factors feed into that choice? And then I'm also curious whether you could address any shifts. I mean, you folks were ahead of the data center surge or benefiting from it. Is anything changing at present? Any shift in how data centers are designed? Do all of them use — the backup ratio? Perhaps what has developed in the marketplace across the past few months?

Jen Rumsey

executive
#20

Yes. So like you mentioned, Cummins holds strength in engines, R&D, and production capacity. We grasp natural gas. Thus the issue becomes, we currently have a particular lineup of nat gas offerings and are evaluating what is — should demand exist for nat gas among data centers, which product fits best? Should we lack it at present — our development follows a cycle spanning multiple years, usually, yet we possess the ability to accomplish that if we believe that represents an appealing growth possibility. That's how I'd approach natural gas. Regarding the data center environment, what's evident is that extremely high dependability matters greatly; thus the requirement for backup power so that strong reliability remains won't disappear. They don't operate frequently. Truly, the difficulty lies more with prime power and whether the grid can handle it plus how they address that prime power obstacle. Consequently, that's where employing a backup genset perhaps for peak shaving or extra prime power sources or whatever data centers are investigating. And like I stated during my earlier remarks, I believe we can perform some peak shaving using items we currently offer. We've begun putting money into certain stationary energy storage options that might serve data center uses, and we keep assessing other areas where we think we're situated to invest and achieve appealing returns.

Kyle Menges

analyst
#21

I'd appreciate it if you might expand a bit more on Accelera, and honestly, just examining how it's performing — I mean, it looks as though you remain positioned to reach the midpoint, or perhaps even slightly beyond the full-year guidance for Accelera's revenues this year; e-mobility apparently delivered solid growth during the quarter too; so it would help to hear about what growth you're witnessing in new mobility compared with electrolyzers, and then perhaps broadly speaking, the profitability gaps you currently see between Accelera's e-mobility side and its electrolyzer side.

Mark Smith

executive
#22

Yes. Most of the real sales in e-mobility come from bus applications, much of that right here in the U.S., and that keeps going, and our position there is excellent. There are plenty of other explorations and discussions. A significant shakeout has occurred even within the e-mobility industry, owing to, I'd say, diminished prospects for faster growth, even while we're expanding the overall — everyone's growth projections have declined, and that has produced a shakeout certainly among many start-ups, some of the participants with less capital behind them. So I believe there remains considerable discussion and future opportunity for Cummins in e-mobility. And I think that has generally been a positive story, in that as volumes came and we introduced new iterations of products, we shifted from, yes, substantial losses and negative gross margin toward something far more stable and sustainable ahead. It's still rather muted, right, within the grand scheme of a $35 billion company, but clear progress has been visible there, and we're optimistic and remaining invested there. On electrolyzers, we look back a couple of years, we had fairly ambitious growth targets and we tracked that trajectory each quarter. It was — we were tracking years ahead regarding where we needed to be, and we stayed on that curve for considerable revenue growth for quite a while. And the reality is, yes, it dried up faster than anything I've witnessed in my career for many reasons, particularly here in the U.S., but also some adoption in international markets. So while, yes, we probably guided somewhat cautiously as we entered the new year, not knowing precisely what would happen. So we're not far off on revenue from the guidance we no longer have, but the one we originally provided. But yes, just internally, it surprised even us to the downside; and so that's why; it might appear to you that we're on track, but electrolyzer is far off; and it's not merely for now, but then that leaves the orders with a big gestation period between taking an order, shipping a product, having it installed, recognizing the revenue. So beyond the fact that orders are currently smaller, that creates something like a gap in our forward projections across the coming 2 years. That's the reason we're taking action at this point. So conditions are hard — extremely hard within ex e-mobility — yet we're happy with how things are progressing, and I don't want the e-mobility team's work to get overlooked.

Kyle Menges

analyst
#23

That's useful, Mark. Then a quick follow-up to clear up a few of your remarks about emission margins, and maybe just to consider some of the pluses and minuses heading into Q4 on Engine margins as you begin to offset tariffs, even if volumes are still lower sequentially. I suppose what I'm asking is, when you said Engine might be roughly like the third quarter, does that mean you're confident of delivering about a 10% EBITDA margin once more in Q4? Or are we discussing comparable decrementals, in which case Engine could see around 8% EBITDA margins in Q4 depending on volume...

Mark Smith

executive
#24

Let me just state it plainly here, and this — all of you can — I don't anticipate 8% margins in Q4 for the Engine business, but a few of the drivers — volume is declining, though we don't expect that. Unfortunately, I am confident, but we're hoping that marks a bottoming. We also observed a deceleration in parts. We hope that doesn't keep going. And then, yes, everything else we're pursuing on cost, productivity, and steering through tariffs can all assist in mitigating. It definitely won't be dramatically better. We're facing more headwinds. I've attempted to be clear on that. So hopefully, that's useful. I'd simply note, there's invariably some seasonality, Q4 as we head into the holidays. Those tend to get amplified when the economic environment is weak. But right now, we're putting in the effort. The Engine business is putting in the effort daily to strike this balance correctly; and what you're able to see from our financial reports is that we disclosed engineering costs by segment, by quarter. You can see our engineering costs have risen year-over-year since we remain in this prelaunch development, with regulations not yet finalized; so that has to carry on, but it shouldn't be a step worse in Q4. So don't count on magic, but don't count on 8% EBITDA given what I know right now.

Jen Rumsey

executive
#25

Let me tack on two more items. We've been making efforts to scale back production at facilities, so we're seeing those steps take effect across the entirety of Q4, and the Engine business has absorbed an outsized portion of the net tariff hit that weighed on it during Q3, though we're moving toward fuller recovery. Come Q4, that figure will come down.

Mark Smith

executive
#26

Yeah, naturally, things shift a bit from one business to another. Broadly speaking, like we've mentioned before, Power Systems and Distribution should perform well. No two quarters ever match the one before, even when the top line looks comparable. Engine and Components are still under pressure. We continue keeping a firm grip on expenses, and on Accelera we're working out what additional steps are possible — that's the main takeaway. Then, as I noted, we've taken considerable action to strengthen our credit metrics, which leaves us room for capital allocation down the road. So while downturns are difficult, navigating through them well creates that foundation and the assurance to push ahead once demand picks up. I wish I could sound more optimistic and tell you we're extremely confident; we sense we're nearing the bottom of the trough in on-highway. We believe the momentum in power generation and data centers, which favor Power Systems and Distribution, will keep going. So with luck, we'll see strong demand come together across the whole company at some point in the not-too-distant future; right now on trucks it's somewhat hard to pin down. Still, we feel that because it's lasted so long and fallen so far, it's simply a matter of time in a cyclical industry. That said, an upturn isn't about to happen immediately.

Tami Zakaria

analyst
#27

Nice results, and I appreciate you making the time. Could you discuss what you expect for distribution or services over the longer term, given that you're moving these gensets and likely have quite a large installed base at this point? What's the usual lifespan for them? Might there be a case in which the initial round of aftermarket services starts to accelerate for the units you've delivered during the past 12 to 24 months? So is there any way you could address that or put numbers to it?

Jen Rumsey

executive
#28

Tami, when it comes to data centers, the distribution operation earns revenue up front from many customers as they handle installation along with certain extra parts and products tied to the engine and the genset within the data center. Aftermarket revenue is fairly limited in data center backup power, since those systems aren't run very frequently; we do offer some service and support to those customers so they remain operational. It differs from something like a mining application or a heavy-duty truck application. Even so, our installed base keeps expanding, along with those other applications that generate more aftermarket content; therefore, we think aftermarket broadly will serve as a tailwind for the Distribution business, particularly when customers return — currently there's a bit of deferral of service that isn't required given business financial conditions — but we expect some aftermarket improvement, as Mark mentioned.

Tami Zakaria

analyst
#29

Got it, that's really useful. And assuming NOx 2027 isn't pushed back following the review, what's your thinking on the timing of product launches in 2026 that relate to it?

Jen Rumsey

executive
#30

Yeah. Great. So our attention stays fixed on creating the new offerings we're bringing out for '27, and we feel confident about where we stand with the fresh platforms and technology we're delivering to our buyers; one thing to grasp is that uncertainty surrounding regulation has never been this high for us. That has definitely made things difficult, and it means keeping our people concentrated on the upcoming launches, beginning to collaborate with our supply base regarding various scenarios and what those might imply, so we can try to make sure a product can be provided to our customers once we know that decision. And honestly, we've stayed in close contact with the EPA while they examine ways to potentially remove some expense from that rule, and we've also stressed how much we need clarity as quickly as possible; and I believe everyone, every OEM across the industry, is pressing on that clarity issue; so we're set to launch, and we're truly hoping to receive clarity on the direction in the near future; and if the '27 regulations mostly remain as they currently stand, we'll be prepared to bring our products to market in '27.

Steven Fisher

analyst
#31

Nice work on the power numbers. I'm just wondering about international data center chances compared with the U.S. — what differences do you expect there? Is the momentum any different? And how do competitive dynamics vary abroad versus here at home?

Jen Rumsey

executive
#32

When you look at the data center market, we're seeing robust and expanding demand in the U.S. and China; those two really stand out. There's growth worldwide. Some of my figures gave you a sense of how the market is shifting. We're seeing investment in data centers and other markets globally. But really, the 2 biggest areas are U.S. and China. And naturally, everyone is attempting to work out how to enter and compete in that market. So we're well — very well positioned today and really trying to focus on continuing to maintain a strong position with our products as others try to figure out how do they take advantage of those market opportunities.

Mark Smith

executive
#33

Alright, and so...

Steven Fisher

analyst
#34

Please, Mark, continue.

Mark Smith

executive
#35

What I meant to say is that, clearly, when it comes to China, the pattern — across the majority of markets where we operate — is that you usually observe a bigger showing of regional rivals, or attempts by them to enter, compared with what we encounter in the U.S. or elsewhere.

Steven Fisher

analyst
#36

That's clear. Now regarding Power Systems margins overall—clearly they remain quite robust—and earlier you mentioned those 50% incrementals. What I'm picking up on is that as this year has gone on, margins in that segment have somewhat leveled off. So I'm wondering what's behind that. Is there anything besides data centers holding it back? At the start of the year, there was a lot of discussion about aftermarket components in that area. Perhaps that was simply moving around a bit. I'd like to understand how we should view this plateau we've been seeing throughout this year.

Mark Smith

executive
#37

I'd describe the overall picture this way—so that's the positive part. Aftermarket and all goods segments naturally vary somewhat. So at times that can be a factor. The encouraging part, Steve—going back to whoever asked whether we ought to lift the targets—I genuinely appreciate how you're thinking. Jenny and the team could well be tuning in, I'm sure. If they aren't, we'll pass that along to them afterward. But yes, I'm truly proud of what we've accomplished there. And as demand climbs, yes, there's investment in capacity. We anticipate earnings growth. Let me just state it plainly. Based on what we know today, we anticipate earnings growth from this point through next year.

Noah Kaye

analyst
#38

Jen, I believe you described the situation nicely and addressed how much uncertainty exists at the moment while you get ready for the product launch coming next year in relation to the rules. Yet once you start working on budgeting for the end of the year, would it be reasonable to view engineering and development spending as a possible tailwind heading into next year? Or do you think it would instead be a headwind assuming the base case of no regulatory changes holds?

Jen Rumsey

executive
#39

Under the base case where regulations stay the same, my view is that our research spending will remain fairly level throughout next year as we bring the product to market, and after that we'll be in a position to begin bringing it down. Then, looking at demand alone, that's where — while we're doing our planning for next year, that's the area with the widest error bars: what will take place with on-highway demand. As Mark pointed out, we believe we're hitting the bottom. We believe there's a bit of upside. When will that occur, given all the capacity that has been removed as we've dealt with this significant down cycle, and how fast will capacity be brought back once demand begins to rise? So I expect some revenue growth at some point during the year, but R&D is remaining fairly level.

Mark Smith

executive
#40

Correct. It's likely that Accelera won't expand, and we're always asking ourselves where we're putting money for what's ahead — be that Engines and Components, Power Systems, or technologies still to come; still, for the coming year, no big shift. You simply get ordinary inflation since so many of those expenses are tied to personnel. That kind of routine inflation is something we're perpetually fighting. So it won't be much of a tailwind, to phrase it that way. Over a longer horizon, sure, but not right away.

Jen Rumsey

executive
#41

Certainly.

Noah Kaye

analyst
#42

On the investing side, and connecting that to what we discussed regarding the prime power chance — 30% of data center sites might rely on prime power in some form 5 years from now. In our portfolio we have fuel cell, battery, plus natural gas and diesel gen. How would you consider bringing some of those pieces together, including whatever sits within Accelera at present, to pursue greater wallet share should prime power turn into a bigger growth opportunity?

Jen Rumsey

executive
#43

Yes. Our approach has truly been to keep a portfolio of solutions likely spanning various customers and markets. There won't be a single answer. Given our robust standing in engines as power demand rises and as energy transition gets pushed out, that puts us in a really good spot. Frankly, in both power generation and mobile applications, we're more concentrated on battery opportunities, where we see greater potential compared with fuel cell; we — as you're aware, we've reduced some of the investment and work on the fuel cell side; and there will be more to share if we identify a clear investment that we believe will be appealing on the prime side. But at present, our focus is really on continuing to carry out some of the investments we've already made to grow capacity in standby and on being disciplined about how we consider further investments into that market.

Mark Smith

executive
#44

Right, I'd say what makes our current position so strong is that the money we've put in has been fairly small, yet it delivers substantial expansion, and the payback is fairly easy to forecast. That's clearly showing up in the numbers we report. We ought to keep pushing further from here.

Cole Couzens

analyst
#45

Cole Couzens here, filling in for Scott. I wanted to dig a little deeper into the Engine margins. From what you're saying, it sounds like the biggest net tariff hit came during Q3, since you're getting more price back and winding down facilities in Q4. Still, when you look out to 2026, a rebate of 3.75% isn't insignificant. Assuming nothing else changes, how much of a boost could that give margins in Q1, or across all of 2026?

Mark Smith

executive
#46

Honestly, I just can't give you an answer on that. I wouldn't view tariffs as something that improves margins. It's been a significant cost headwind that we've been attempting to recover, doing everything we can to lessen that cost. I get why the question is being asked, but under no circumstances are we treating tariffs as a margin opportunity. It's been a major obstacle for our industry. Hopefully, we see stability and some relief.

Cole Couzens

analyst
#47

Okay, that's reasonable.

Mark Smith

executive
#48

Fair point. As we head into Q4, it's accurate to say we're making more progress in catching up on tariff recovery. I'd amend my earlier wording, but as for anything additional, that isn't how we're approaching it. Our hope is that a foundation exists for stronger demand among end user customers.

Jen Rumsey

executive
#49

Yeah, to build on what Mark said, here's how to look at it: if tariffs settle down and customers resume placing orders, that benefits our margins, since we'd be running our plants at higher utilization. But on its own, as far as margin gains go, we're essentially just aiming to cover the cost.

Mark Smith

executive
#50

Right. And we’re not in a position to understand everything — the finer points of anything announced lately, rebates or whatever else. There’s simply far more specifics involved. Take even the emissions rules: it’s wonderful to have the top-line number. But there are countless details you have to understand in between regarding how that truly functions from a financial standpoint, in practice, and so on; so we would really like to offer you greater clarity, we simply aren’t able to.

Cole Couzens

analyst
#51

Absolutely, that makes sense. And maybe regarding how competition is shaping up, there are a lot of shifting factors right now with some OEMs sitting in either a stronger or weaker spot because of the new Section 232 tariffs. Going forward, how do you see that affecting your share position within the Engine business?

Mark Smith

executive
#52

We're well positioned to serve every one of our customers thanks to our U.S. footprint, and the good news is that we have strong penetration across a number of brands and OEMs, and our — broadly speaking, the pattern has been that demand from our customers for Cummins products has been climbing in heavy- and medium-duty truck across the past several years. So we believe we're set up quite well, though it has clearly been extremely complicated for everyone involved and still is.

Chad Dillard

analyst
#53

Given where market demand sits for standby power — and I believe you mentioned orders hit a record level last quarter — does Cummins have to add capacity on top of what's already been announced? Then, I'd also like your thoughts on the part standby power plays as more prime power shifts to behind the meter.

Jen Rumsey

executive
#54

Yeah. On the capacity question, beyond assessing whether we make any moves in prime power, something we spent a lot of time discussing this morning, we're certainly looking at it. What we're weighing is whether there are areas where we can keep putting investment into capacity, since demand is so strong — be it the orders booked last quarter or the discussions happening with certain customers across the globe — and we expect that demand to keep going. So wherever we believe we can invest and raise capacity, we'll definitely be assessing that. And our view remains that over the next few years, demand for prime power will persist. I do believe there's often a hype cycle surrounding technology, but at its core, the requirement to keep more data in the cloud — driven by AI or by other factors — is a trend that will keep expanding.

Chad Dillard

analyst
#55

Then moving to my second one, regarding tariffs. Could you put a number on how much gross tariff effect there will be in 2025? Also, how does that break down between IEPA and 232? And in the event that IEPA gets rolled back, should we think of that more as something that just passes through?

Mark Smith

executive
#56

Guidance on the gross figures hasn't been given by us in general, though the net position for the company has been negative, and so far each quarter we're seeing a negative impact in the tens of millions of dollars. That's all I'm able to share. As for what happens, speculation isn't something I'll do. We simply lack sufficient knowledge about what happens; but we — like we've stated, as plainly as I can put it, offsetting costs on the industry has been a fight for us. Even if we recover it, it isn't a margin — it dilutes margin, correct?

Jen Rumsey

executive
#57

When it comes to IEPA and the 232 tariffs, there are numerous moving pieces, plus a great deal of uncertainty surrounding them. So before we offer any color on how that shakes out, we truly want to get a handle on the specifics. The wonderful news is that our engines and our gensets destined for the U.S. are built by us right here in the U.S., and the team has performed exceptionally well in steering through considerable change and difficulty while striving to recoup the expense of those tariffs; I'm genuinely proud of them given the circumstances we've been working through this year.

Mark Smith

executive
#58

All right. Appreciate it, everybody. Thanks for joining us.

Nick Arens

executive
#59

Today's conference call has now wrapped up. We appreciate everyone joining us and for the ongoing interest you've shown. The Investor Relations team, as it always does, will be on hand to take questions following this call. Thanks.

Operator

operator
#60

That wraps up today's call. You're free to hang up now. We appreciate your joining us.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Cummins Inc. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.

Get the API View API docs →

This call discussed

For developers and AI pipelines

Programmatic access to Cummins Inc. earnings transcripts and 132,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Cummins Inc. or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.