Firan Technology Group Corporation (FTG) Earnings Call Transcript & Summary

February 14, 2020

Toronto Stock Exchange CA Information Technology Electronic Equipment, Instruments and Components earnings 32 min

Earnings Call Speaker Segments

Operator

operator
#1

Good day, everyone, and thanks for joining us on the Firan Technology Group Q4 2019 Analyst Conference call. <<operator_script>> I'd like to point out that this conference is being recorded today. <<operator_script>> At this time, I'll turn the call over to today's speaker, Mr. Brad Bourne, President and CEO. Thank you. You may proceed, sir.

Bradley Bourne

executive
#2

Good morning. I'm Brad Bourne, President and CEO of Firan Technology Group Corporation, or FTG. Joining us on the call today is Jamie Crichton, our Chief Financial Officer. Before we proceed any further, I need to warn you that forward-looking statements may be included in this call. Those statements rest on the company's present expectations and management's current views, and by their nature carry many risks and uncertainties, both known and unknown, including economic factors affecting the company's industry in general. The list just given does not cover every possible factor. Forward-looking statements of this kind are not promises of future performance, and actual events and results may differ materially from those expressed or implied in forward-looking statements the company makes. Listeners are advised to weigh these and other factors carefully when making decisions about the company, and not to rely unduly on forward-looking statements. The company does not undertake, and has no specific intention, to update any forward-looking statements, written or oral, that may be made from time to time by it or on its behalf, whether because of new information, future events or otherwise. Well, the waiting is over, and our results are out. 2019 was a great year for FTG. While we had some challenges in the fourth quarter, for the full year, we achieved record sales, we achieved record EBITDA and earnings, we completed the acquisition of Colonial Circuits, and then we ended the year in a net positive cash position for the first time in my 18 years at the company.

Bradley Bourne

executive
#3

We're quite happy with what we delivered, yet we think there are steps we can and will take to make our results even better down the road. Before I turn to that, though, I'd like to recap a few important achievements from 2019. Our full-year sales reached a record $112.7 million, which is up $8.2 million once you set aside the $5 million one-time revenue adjustment tied to our development contracts in Q1 of last year. EBITDA came in at $14.6 million, up $4.1 million, or 39%, compared with last year. Net income was $6.2 million, and diluted earnings per share were $0.25, which is 116% higher than in 2018. Free cash flow after CapEx totaled $8.5 million, though that figure leaves out the $3.8 million in net cash we paid for Colonial Circuits. At year-end, FTG's balance sheet showed net cash of $2.2 million. A few nonfinancial highlights: we obtained Canadian Technical Standard Order, or TSO, approval for our Cursor Control Device, which lets FTG start producing this product that had been in development for the past 3 years. On July 15, 2019, FTG completed its acquisition of Colonial Circuits Inc. in Fredericksburg, Virginia. From July through November, Colonial contributed roughly $3.6 million in sales.

Bradley Bourne

executive
#4

We started the certification process for the Colonial facility to Aerospace AS9100 certification, and it was completed in early 2020, which opens up new market opportunities for that site. We have collaborated with key suppliers to realize material cost savings for the Colonial site, consistent with costs and other existing FTG sites. In November, FTG reached an agreement with its representative staff at FTG Aerospace-Toronto. That contract runs 4 years, with improvements and benefits and wages in line with typical collective agreements in Ontario this year. We kept revenue from the simulator market at more than 10% of total revenue, though there was a bit of a temporary dip in activity in our fourth quarter. And we won the next phase of the contract to design and build cockpit panels for the Orion manned spacecraft being developed for NASA. Now let me briefly update the overall market situation. While overall demand in commercial air transport remains strong, the challenges at Boeing are definitely impacting production rates and demand within the industry. In 2019, Airbus reported record shipments of 863 aircraft, an 8% increase from 2018. They reported 768 new orders. For Boeing, however, they shipped only 380 aircraft, a drop of 53% from 2018.

Bradley Bourne

executive
#5

However, the supply chain effect was minor, since they continued producing 737 MAX planes at a rate of 42 each month all the way through December. In January, they revealed plans to temporarily halt every bit of 737 MAX output, and that will hit the industry far more heavily. Additionally, during 2019 Boeing recorded negative 87 net new orders, driven partly by cancellations involving the 737 MAX. So it was clearly a poor year for the company. When it comes to FTG, our 737 MAX exposure is modest, at roughly $2 million annually. The risk on the downside is not significant. There's an expectation that Boeing will get back to its 2020 production levels, with an estimated 200 aircraft being manufactured. That works out to about 40% of the historical run rate for the plane. They still have more than 400 finished planes parked and awaiting completion of the upgrades prior to handover to customers. Over the longer horizon, Boeing holds an order backlog exceeding 5,500 aircraft, while Airbus has more than 7,500. So demand over the long term continues to be robust. Single-aisle planes remain the biggest portion of this market, including the Boeing 737 and the Airbus A320, which account for between 70% to 80% of all units in the air transport market.

Bradley Bourne

executive
#6

Additionally, fresh competitors have appeared in this segment, with planes either still being developed or only now reaching production. And although those companies have run into certain delays, they remain moving forward. To name them specifically, the new efforts are the Airbus A220 along with the C919 from COMAC in China, and FTG holds content on both. Should the projection for the C919 hold accurate, the eventual full-rate output, or content tied to that aircraft, ought to reach roughly $5 million each year. The C919 is still working through flight testing using 6 test aircraft. During 2019, we kept up our development work. We anticipate wrapping up those efforts in 2020, and COMAC is projecting an entry-into-service date for the plane in 2021. Regarding the A220, creating the joint venture alongside Airbus a few years back has proven favorable for what lies ahead. By the close of 2019, orders exceeded 600, while deliveries had reached just over 100. Output should keep climbing in 2020. Near term, we still observe conflicting indicators within the regional jet portion of the business, a space where FTG has held an established position over the long run. How Bombardier's departure from the regional jet market through its sale to Mitsubishi will play out is not clear right now, though no major shifts are anticipated on our side.

Bradley Bourne

executive
#7

Regarding business jets, the new Global 7500 is still sold out through 2021. Over the longer term, forecasts for the business jet market are positive, shaped by GDP growth, demand from emerging markets, and the arrival of new aircraft models. The helicopter market was stable in 2019. Going forward, we expect growth as the resource industry recovers and thanks to expansion in other applications, such as emergency services. The defense market is strong. U.S. defense spending has risen over the last few years. Our acquisitions in 2016, and again in 2019, raised our exposure to the defense market, and that should serve us well going forward. The production ramp-up of the F-35 represents a growth opportunity, and we have content on this aircraft. Our 2016 acquisitions have increased our content on that program. Those acquisitions also expanded our activity in aftermarket support across a number of aircraft, from the B-52 and B-1 bombers through almost all fighters. Mainly through our PhotoEtch acquisition, we have become a much bigger player in the aircraft simulation market. That overall market is estimated at over $7 billion annually. The key systems providers are CAE, FlightSafety, Boeing, Rockwell, L3, Lockheed and Thales.

Bradley Bourne

executive
#8

We're working with 5 of those 7 companies. We've secured some meaningful contracts, and revenue tied to simulation made up more than 10% of FTG's total revenues in 2018 and once more in 2019. Yet, as we've noted over the last 2 years, simulator-related revenue tends to be lumpier, and in the fourth quarter of 2019 we saw activity decline compared with earlier quarters. Although we closed the year with more than $8 million in simulator work as backlog, we don't anticipate moving much of it in the first 2 quarters of 2020. FTG has prospered and will keep finding the right sales balance across these different market segments. That ought to help keep our revenue stream stable as each segment moves through its usual cycles. Now let me return to FTG's results. We entered 2019 with $49 million of backlog and finished the year at essentially the same level. But as we head into 2020, bear a few things in mind. First, as always, Q1 comes in somewhat lower than other quarters because of production days lost over the Christmas holiday period. Also, as I mentioned, even though our simulator business carries a sizable backlog of work, we won't be able to move much of it until late Q2 or into Q3.

Bradley Bourne

executive
#9

And then lastly, although it's still a fairly small piece of FTG, our China facilities are still shut down following Chinese New Year and the coronavirus problems over there. Our expectation was to reopen this week, but government approval for that has not come through yet, and when it will happen is uncertain. On the whole, FTG sales for 2019 came to $112.7 million, which is up 3% versus last year. Keep in mind, though, that 2018 included a onetime revenue adjustment tied to our China program. Once you exclude that, growth stood at 8%. Also, in Q4 a cyberattack hit us and shut down operations at our North American sites for somewhere between a few days and a few weeks. That cost us an estimated $3 million in shipments. So factoring that in, our 2019 growth would have come to 11% year-over-year. Within that growth, $3.6 million, or 3%, was contributed by the Colonial Circuits acquisition in July 2019. Overall at FTG, our top 5 customers represented 53.9% of total revenue for the year, versus 48.1% last year. The makeup of that top 5 did shift relative to last year. The largest shift was United Technologies combining with Rockwell Collins, since both had been important customers.

Bradley Bourne

executive
#10

And combined, they're our biggest now. Consolidation in the industry is certainly making our customer concentration higher. Another interesting point: among the top 10 customers, 7 overlap between Circuits and Aerospace — that's out of the top 7 customers, actually, of the top 10, 7 are shared. Shared customers are something we especially like to see, because it shows we're getting the most out of our penetration of those customers by selling them both cockpit products and circuit boards. We also had 2 simulator customers and 1 customer in China on our top 10 list. In 2019, our Aerospace business accounted for 36.6% of total revenues, versus 41.4% last year. That decline is partly because of the onetime $5 million revenue adjustment in Aerospace last year, which inflated last year's percentage, and also because the Colonial acquisition added to circuit sales in 2019 after the acquisition. I'd like to hand the call to Jamie, who will summarize our financial results for 2019. And after that, I'll discuss some site-specific items and other key priorities we're working on. Jamie?

Jamie Crichton

executive
#11

Thanks, Brad. Good morning, everyone. Every reference I make to dollar amounts in these remarks is in Canadian currency, unless I say otherwise. I want to give you some extra detail on how we performed financially in 2019, and in Q4 as well. With sales of $112.7 million, FTG posted a gross margin of $30.3 million, or 26.9%, versus $25.3 million, or 23.1%, in 2018. Several things are behind that gross margin increase. First, cost reductions and better yields throughout the corporation helped lift margins. Higher volume of $7.4 million in the Circuits segment helped gross margin by improving utilization of fixed costs. The $4.1 million volume decline in the Aerospace segment is net of $5 million of lower revenues on the C919 program as we get close to finishing the development phase. Lower revenue in Aerospace barely affected gross margin dollars, since the C919 development phase program carries a modest gross margin. Partly offsetting these positives is the cyberattack's effect, which cut productivity in Q4. FTG's gross margins for the fourth quarter of 2019 fell to 21.7% from 25.9% in Q4. And gross margin dollars in Q4 came in $1.3 million lower than the prior year.

Jamie Crichton

executive
#12

That decline stemmed from reduced productivity right after the cyberattack, which pushed deliveries past the quarter's end. FTG experienced a cyberattack affecting our systems throughout North America, with Fredericksburg being the only exception. The impact varied by site, with operations curtailed for anywhere from a few days up to a few weeks, depending on how each site's infrastructure was affected. Total lost production is put at 10% of typical quarterly sales. In responding to the cyberattack, FTG engaged experts to establish the method behind the attack and the measures needed to lessen both the likelihood and the severity of any attacks down the road. There is no indication of loss from data usage, which was stored inside our network when the event occurred. We have invested, and are planning further investments, in the security and recoverability of our network and systems, along with user awareness and training. Costs incurred directly because of the cyberattack in Q4 2019 include $0.2 million, primarily within G&A expense. We additionally incurred $500,000 to $600,000 of extra costs during the first half of 2020, mainly -- mainly in capital expenditures, to address the security and recoverability of our networking systems.

Jamie Crichton

executive
#13

Looking at it geographically, customers in the U.S. accounted for 74% of FTG's 2019 sales, compared with 69% a year earlier. Two things drove that change: demand from the U.S. defense market stayed strong, and we acquired FTG Circuits-Fredericksburg. That Fredericksburg site added $3.6 million to 2019 sales and today sells mainly into the U.S. Northeast region. SG&A expense came in at 12.1% of sales in fiscal 2019, basically flat versus 12.2% the year before. The roughly $0.4 million dollar increase takes in $0.2 million of expenses incurred after the cyberattack plus 4.5 months of impact from the Circuits-Fredericksburg site. In Q4 2019, SG&A ran $0.6 million below Q4 2018, and that comes from lower personnel costs, including performance compensation, partly offset by $0.2 million of cyberattack cost. R&D costs were $4.8 million in fiscal 2019, or 4.3% of net sales, essentially flat with the prior year. Our R&D work centers on process and product improvements, led by our Circuits-Toronto site, where specific projects target development and integration of robotic manufacturing equipment. Earnings before interest, tax, depreciation and amortization, or EBITDA, calculated as described in our press release, reached $14.6 million for the trailing 12-month period ended November 30, 2019 — a 39% increase over the trailing 12-period in 2018.

Jamie Crichton

executive
#14

The $4.1 million rise in EBITDA versus 2018 comes from business growth and a higher gross margin rate. After the 2019 year-end, our net cash position stands at $2.2 million, compared with net debt of $2.4 million at the close of 2018. That $4.6 million net increase reflects the $3.8 million in cash consideration paid for the Circuits-Fredericksburg acquisition, which closed in Q3. Free cash flow — cash from operations minus cash used in investing activities, excluding acquisitions — came to $8.5 million for the full 2019 fiscal year and $2.4 million for Q4. While we did manage to bring inventories down during the year, accounts receivable rose, driven by the addition of the Circuits-Fredericksburg site and by Q4 revenues landing more toward the latter part of the quarter as we recover from the cyberattack. At the 2019 year-end, the corporation's primary sources of liquidity totaled $51.2 million, made up of cash, accounts receivable, contract assets and inventory, but not including USD 9 million of availability on the revolving line of credit and roughly $2.7 million of availability on the revolving U.S. — on the revolving term loan with our primary lender as at November 30, 2019.

Jamie Crichton

executive
#15

The card banking facility we have runs out in November 2020, so the $5.4 million of outstanding net debt shown on the balance sheet sits as a current liability. We believe we can wrap up a new banking facility on terms that are comparable, or even improved. Working capital stood at $28.6 million on November 30, 2019, versus $28.7 million on November 30, 2018. Accounts receivable days outstanding came in at 70 on November 30, 2019, against 59 in the prior year. Inventory turns were 3.7 on November 30, 2019, compared with 3.2 the year before. And accounts payable days outstanding reached 81 on November 30, 2019, versus 78 a year earlier. Investment in plant and equipment for fiscal 2019 includes an addition — sorry, an addition of $5.5 million, of which $2.4 million of plant and equipment came in as part of the Circuits-Fredericksburg acquisition. Capital expenditures this year went mainly toward our Circuits segment and were aimed at boosting capacity, efficiency and productivity. We came into Q1 2020 with a solid backlog of $49 million, and our focus is on delivering a strong year. All of our 2019 filings can now be found on SEDAR.com. With that, I'll hand things back to Brad.

Bradley Bourne

executive
#16

Thanks, Jamie. I'll go into a few specifics at the site level. Circuits-Toronto enjoyed another strong year, with both revenue and profit rising. Yet, as we've noted before, that site is nearing its capacity limits. During 2019 we put money into new capital equipment to expand capacity and enhance capability. In addition, buying Colonial lets us shift a portion of medium-technology work away from Toronto, which frees up capacity for fresh higher-tech opportunities. At Aerospace-Toronto, revenue edged up, once you exclude the onetime adjustment in 2018. That site took a hit from the cyberattack in Q4 2019. Its profit declined, in part because of a change in our intercompany accounting process — not an operational matter — and in part because of lower revenue. Our engineering and development programs at that site were running at full tilt in both 2018 and 2019. Over at Aerospace-Tianjin, sales climbed 20% in 2019 and profit jumped 160%. The site gained from several sizable simulator orders in China earlier in the year. Although we hope and expect to do more of this in 2020, those orders are not booked at present. At the Circuits joint venture in China, sales came in similar to last year, while profitability slipped somewhat as we took on extra costs for the outer layer facility and some significant qualification activities in 2019.

Bradley Bourne

executive
#17

Those qualification-related activities are what’s driving the growth opportunities in 2020 and beyond. At both of our China sites, we keep seeing chances to grow, though the trade situation between the U.S. and China, along with the dispute between Canada and China, is creating some uncertainty for us as we look ahead. The recent U.S. — or the U.S. tariffs on Chinese goods could have an impact on our circuit board business. We haven’t seen any impact just yet, but we’re watching this closely. At our Aerospace-Tianjin facilities, they’re experiencing some Chinese retaliatory tariffs affecting goods they’re buying from the U.S., and that is driving up their cost. Again, this amount is not material as of now, but it also is an area we are watching closely. At Circuits-Chatsworth, activity was down 4% year-over-year primarily due to the impact of the cyberattack in our fourth quarter. Bottom line performance was slightly improved year-over-year thanks to some cost-saving initiatives completed in 2019, but there’s still more we can do and we’ll do to further improve their operational and financial performance. In Aerospace-Chatsworth, activity was down about 6% year-over-year, due in part to the cyberattack and in part to ongoing lead time challenges on key components. But again, their bottom line performance improved, in this case significantly year-over-year, due to many cost-saving and operational improvement initiatives.

Bradley Bourne

executive
#18

Also, starting in July 2019, buying Colonial Circuits brought in $3.6 million of sales and roughly $300,000 of net income for FTG. On the staffing side, I'm really happy with the important changes we made during 2019 and how those additions are helping our results. More specifically, bringing in Paul Godbout to run the Fredericksburg site as general manager matters a lot, since the prior owner and operator has retired. I have known Paul for a long time, and I'm sure he'll lead Fredericksburg to strong success ahead. At FTG overall, staffing grew in 2019 to 524 employees from 488. The Colonial Circuits deal brought in 48 people. So apart from that, FTG's headcount fell by 12 people, because we're raising efficiency even as revenues grow. Certain of those headcount changes led to termination costs of approximately $0.5 million in 2019, which affected profitability and EBITDA for the year. We keep managing our balance sheet. Working capital stayed basically flat in 2019 even as we increased sales and bought Colonial Circuits. In particular, we did a strong job of lowering our inventories during the year. We're also still making solid progress across several technology areas.

Bradley Bourne

executive
#19

We keep looking into semi-additive and fully additive production methods for our printed circuit boards. Our belief is that the industry will shift toward an additive process, and we want to engage with customers at this stage and take part in the technology as it advances. In 2019, we took delivery of new equipment for an additive solder mass process at our Circuits-Toronto facility. That equipment should be up and running in 2020. We also advanced further on automation and robotics efforts at Circuits-Toronto, including some Industry 4.0 functionality. As we head into 2020, we have 2 robotic system implementations in progress. Going forward, our balance sheet is the strongest it has ever been, and there is a solid pipeline of potential acquisition opportunities. So we hope to stay active on that front in 2020. With attention to operational excellence across all parts of FTG, our expanded product offerings and cost of products and high-technology circuit boards, our standing on key new programs, our initiatives in China and the acquisitions, we anticipate continued long-term growth and better financial metrics ahead. FTG's management has been and will stay fully dedicated to building shareholder value by developing and executing strategies for revenue and profit growth at the company.

Bradley Bourne

executive
#20

That brings our presentation to a close. Thank you for listening. At this point, I'd like to open the lines so you can ask questions. Jason, go ahead.

Operator

operator
#21

<<operator_script>> Our initial question is from Nick Corcoran, who is with Acumen Capital.

Nick Corcoran

analyst
#22

Alright, yes. So the first question is about how the coronavirus is affecting things. In your prepared remarks, you mentioned that the manufacturing facility is not yet operational. What steps are required in order to reopen it?

Bradley Bourne

executive
#23

The first thing you have to do is get approval from the government before you can open the facility. Within that process, though, you must file a plan with the government — basically, the steps you'll take in an effort to contain or minimize any risk of coronavirus spreading inside your business. That covers plans for sanitizing your plant regularly. It covers plans for giving masks to employees. And it will also cover plans for how you'll give people enough room to eat lunch without sitting near others. So we've been working on these plans. We've submitted them. But virtually every company in China has to do this. So we're waiting for feedback and, we hope, approval of our plans. That does make the timing a little bit uncertain. The parts we need to do, we've done, but now we need feedback from the government. This may be a bit of a detail, but just as an example, one of the biggest challenges here is, as I said, you have to be able to provide masks for all your employees. Masks are really in short supply in China because virtually everyone is trying to get them.

Bradley Bourne

executive
#24

So what we did is actually buy masks here in the U.S. and ship them over to China, so that they'd be on hand the moment the government gives the word. That means we're now waiting on the government.

Nick Corcoran

analyst
#25

All right. So after the plant is running again, what are the odds that you could catch up — say, by adding shifts or bringing in more employees at any one time?

Bradley Bourne

executive
#26

Adding staff quickly is going to be hard. The one thing we can definitely do, though, is run some overtime or have people put in more hours each day or each week to try to catch up. To be clear, I guess, at this point our plans are around — our expectation is that getting approved to open won't be a long delay. But if we start to see this stretch into a longer period of time, we're also looking at whether we could take some of the work and bring it back to Toronto or Chatsworth or somewhere to build it here instead of waiting for China. We're definitely not doing that right now, but it's something we are evaluating in case we need to do it.

Nick Corcoran

analyst
#27

And then my final question is this: has the coronavirus had any effect on the supply chain that you've observed?

Bradley Bourne

executive
#28

Nothing as of now. And I suppose the main point I'd make regarding our Circuits business is that many of the materials we purchase originate in China. That said, we've been coordinating with our suppliers on this, and we're doing so currently. Broadly speaking, what I'd tell you is that the materials required for the coming few months are, at this point, already sitting in North America. So once more, provided the delays stay fairly brief -- or the shutdowns stay fairly brief, I believe we're in good shape. Should they stretch out longer, that could affect our supply chain. And the final thing I'd add on this is that a handful of our suppliers have in fact gotten their approval to reopen, and in that case, the risk has disappeared.

Nick Corcoran

analyst
#29

Also, could there be any problems exporting the product out of the country?

Bradley Bourne

executive
#30

That doesn't appear to be the case. Obviously, nothing has gone out from us since the shutdown—we haven't shipped a thing yet. But in the reverse direction, as I mentioned, we needed to send masks into China, and that shipment went through without any trouble. So the couriers and their various services really do seem to still be running. And once more, regarding our suppliers—or at least the ones that are coming back online—they're reporting no problems at this point with shipping product out of China.

Operator

operator
#31

That brings us to the end of the question-and-answer session. I'll now hand things back over to the presenters.

Bradley Bourne

executive
#32

All right, thanks. A recording of today's session can be replayed up through March 13. The dial-in figures listed in our press release — a replay is going to be posted on our site within a few days as well. I appreciate everyone's interest and for joining us. Thank you.

Operator

operator
#33

Today's conference call has now finished. You can go ahead and disconnect your lines.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Firan Technology Group Corporation transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.

Get the API View API docs →

This call discussed

For developers and AI pipelines

Programmatic access to Firan Technology Group Corporation earnings transcripts and 132,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Firan Technology Group Corporation or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.