Gauzy Ltd. (GAUZ) Earnings Call Transcript & Summary

November 12, 2024

NASDAQ US Information Technology Electronic Equipment, Instruments and Components earnings 49 min

Earnings Call Speaker Segments

Daniel Scott

executive
#1

Thanks, Operator, and I appreciate all of you being with us today. Gauzy's CEO and Co-founder, Eyal Peso, along with CFO Meir Peleg, are the ones leading today's call. During this call, management will share forward-looking statements rather than historical facts, and those statements rest on management's present expectations, beliefs, projections, and assumptions, many of which are uncertain by their very nature. These forward-looking statements carry risks and uncertainties, and actual results might differ materially from what we project if any of our key expectations, beliefs, projections, or assumptions turn out to be wrong due to other factors covered in today's earnings news release, in remarks delivered during this conference call, or in our most recent reports and filings with the Securities and Exchange Commission, all of which are available on our website, www.gauzy.com. No duty is undertaken by us to update any forward-looking statements. The information on this call is time-sensitive and accurate only as of today, November 12, 2024. Unless the law requires it, Gauzy disclaims any obligation to publicly update or revise any information so it reflects events or circumstances arising after this call. References to non-GAAP financial measures also appear in today's presentation. For definitional information and reconciliations of historical non-GAAP measures to the comparable financial measures, you should refer to the information contained in the company's Third Quarter Press Release; with that, I'll hand the call over to Eyal.

Eyal Peso

executive
#2

Thanks so much, Dan, and good morning to all of you. I appreciate you joining us. This marks our second quarterly earnings call since becoming a public company after our June IPO, and I want to convey my sincere gratitude to our outstanding team for their effort, commitment, and ongoing professionalism, as well as to our investors for your tremendous backing. Across 2024, we've delivered remarkable growth fueled by both promising new commercial opportunities and the deepening of existing relationships with our loyal customers. This robust performance represents only the start of what our gifted team is capable of achieving, and we stay committed to carrying out our strategic vision and meeting our obligations. My opening remarks today will center on three subjects. First, the robust and expanding demand throughout our four business divisions, together with a few notable strategic new customers and contracts. Second, I'll provide a high-level overview of our third quarter and year-to-date results, including steps we've taken to boost our production capacity in order to satisfy ongoing accelerating demand while keeping our near-term objectives of reaching profitability. Lastly, I'll talk about how we're positioned to fulfill our substantial backlog while pushing forward our innovation pipeline to realize our favorable outlook for the business in the fourth quarter and into 2025. After that, I'll hand things over to Gauzy's Chief Financial Officer, Meir Peleg, who will walk through financial highlights from the third quarter and also provide details on our initial fourth quarter guidance. The third quarter mattered greatly for our company in numerous respects, one in which we showed the fundamental strength and agility of our platform as we balanced accelerating demand with our emphasis on steadily enhancing profitability. A prime example was demand in our aeronautics division that exceeded our capacity to deliver because of labor constraints and the usual seasonality at our European production facilities. Instead of quickly bringing on new staff at significant expense that would demand extra training and far greater cost over the long run, we collaborated closely and diligently with our unions to introduce a second shift in France, a first for Gauzy; this backing and partnership with our unions enables us to, one, manage our fixed labor costs more effectively and, two, ramp up production efficiently and rapidly without giving up profitability. Since that's a crucial point that illustrates how we run and scale our business, we're constantly adding products and technologies, driving accelerating demand from our customers throughout our four business divisions, yet we won't give up profitability in chasing outsized growth. As you can observe in our narrowing net losses, we're continuing along our path of improving profitability as we remain laser-focused on steering the business toward EBITDA positive, then operating cash flow and ultimately free cash flow and net income. The growing demand we discuss is genuine and tangible. This shows up among the biggest corporations and labels on the planet; they pick us not merely for one purchase, but for deliveries spanning multiple years of essential technologies that underpin what they produce. During Q3, we revealed fresh business with Ferrari, among the most recognizable auto OEMs and fourth biggest worldwide by market cap, Yutong, the globe's top bus maker, a significant global carrier, and a leading cruise vessel builder internationally. Let me now go deeper into a few of those plus other primary demand catalysts throughout our 4 business divisions. Within our safety tech division, Yutong, whom I noted is the planet's biggest bus producer, boosted Q3 orders by 250% versus the prior year. A portion of that order's effect is visible in our 68% revenue increase for the division compared with a year earlier. This expanding partnership with a key OEM puts us in position to grow our already leading worldwide standing in passenger buses as they broaden deployment of our smart vision ADAS system across both single and double-decker models. That system currently sits on tens of thousands of buses across over 80 cities globally; during this quarter alone, we delivered on a record quantity of buses in Australia, representing 100% growth compared with the prior year. Each of these demonstrates how our ties with OEMs and regional transportation authorities fuel growth. Gauzy remains the sole company on earth today equipping entire cities with ADAS, no mirrors on public transportation. Within that same division, during September, we introduced our next-generation AI-driven advanced driver assistance systems, or ADAS, for commercial trucks. Ford Trucks ranks among the initial OEMs to pick this thrilling technology and has committed to us for no less than 10 years of serial production on their trucks. Our Smart Vision ADAS for trucks substitutes conventional mirrors with high-definition cameras and displays providing real-time audio-visual alerts grounded in image analysis and predictive learning, boosting safety by removing blind spots and raising ROI via fleet efficiency. In our aeronautics division, we struck an agreement with a significant global carrier to supply cabin shading systems using our LCG, or Light Control Smart Glass products, for their business-class cabins across both new and existing 737 MAX fleets; this marks a crucial development since it signifies entry into the cabin shading market for commercial aircraft, where we expand quickly. As previously disclosed, we have achieved 95% global market share in cockpit shading for commercial and private aircraft, and we stated during the quarter that we anticipate this to mean at least $240 million in revenues in aggregate for Gauzy across the coming 10 years; this win illustrates how we capitalize on our robust business relationships and presence with OEMs to move into further applications representing high volumes. In our automotive division, we secured our biggest auto contract so far. At the start of this year, we entered into an agreement spanning 9 years to supply our product for an average of 50,000 vehicles annually with a big European OEM. Work backing this deal is accelerating at this moment, and we anticipate generating our initial revenues from it during early 2025. Also, we shared news not long ago that Ferrari picked Gauzy as a strategic supplier to deliver SPD Smart Glass technology for serial production of their new four-seater. For the first time, Ferrari has brought Smart Glass technology into mass production for one of its designs, and we take pride in contributing to this thrilling offering across the next 8 years committed, and within our architecture division, we received several new awards. To begin, a major cruise ship builder chose Gauzy for their new terminal located in Miami, Florida, which is going to feature more than 11,000 sq ft of Gauzy PDLC to create a transparent display facade. We further anticipate that our technology will be integrated into existing and forthcoming vessels from that manufacturer. In addition, one of India's biggest commercial sector developers has contracted with Gauzy for several new buildings across the country, beginning with more than 5,000 sq ft in a new establishment in central New Delhi.

Eyal Peso

executive
#3

Additional orders are lined up for us in the pipeline, aimed at the hospitality segment with this particular customer, and we're thrilled about what lies ahead for this region. And last, we unveiled the very first LCG Smart Glass powered by solar at Glasstec, which backs sustainability efforts in built environments; we anticipate bringing this groundbreaking product to market in 2025 and taking advantage of an expanding market. Now, let me share a few big-picture observations about how we did this quarter and so far this year. Total revenue rose 24.6% during the third quarter and 29.2% year to date compared with the equivalent stretch of 2023. The strength we showed in Q3 stands out even more when you factor in that we fell behind on some shipments that we now anticipate sending out during Q4; this happened mostly within our aeronautics division while we collaborated with our unions to bring on extra shifts so we could keep up with rising demand. The key point is that appetite for what we make was present all along and simply keeps gaining momentum. Now that a second shift is fully staffed, we're already moving that backlog out the door and are in a strong position to satisfy greater demand through 2025 and past it. As we noted in our pre-announcement, roughly $4 million worth of orders that had been set for the third quarter will instead go out during the current quarter, Q4. Results for the quarter showed notable strength in safety tech and architecture. Rising revenues served as the main force behind improved gross profit during the quarter. If you examine how we've done over a trailing 12-month period, revenue has climbed a striking 29.8%. One useful thing to keep in mind: during a normal year, Q1 tends to be our softest, Q4 is by far our best, and the two quarters in between are usually comparable, mostly because of European vacation habits. Things have been extremely busy for us in the handful of months following our IPO. We've boosted our labor output by adding a second shift, with backing from our unions. We've rolled out fresh products such as the next generation of our ADAS Smart Vision for commercial trucks, and we keep securing important business. Our end markets are expanding rapidly, our backlog keeps building, and our offerings are capturing market share. The demand exists, the orders exist, and we have complete confidence that we'll hit our targets; at this point, I'll hand things to Meir for an update on Gauzy's financial results.

Meir Peleg

executive
#4

Thanks, Eyal. In Q3, our revenue came to $23.3 million. That's a 24.6% rise over the same period last year, and it matched the level we pre-announced. We saw solid demand for our products in safety tech, architecture, and automotive. The revenue from those divisions was more than enough to make up for a drop in aeronautics, which came from how deliveries were timed on a full-year contract. Like Eyal mentioned, our contracts usually cover full-year order quantities, and shipments can fluctuate from quarter to quarter depending on what customers need and, this quarter, on what we were able to ship. So results can differ quarter to quarter, but if you look at us over a full year, the strength of our model is much clearer. Gross profit in Q3 was $5.6 million, which is an 11.5% increase from $5 million in the same period last year. That worked out to gross margins of 23.9% in Q3, versus 26.8% in the prior year period. The main reason was the mix of revenue from our divisions. Of all our divisions, aeronautics generates the highest margins, and those held up well this quarter. Still, because aeronautics made up a smaller share of gross profit, overall gross margin came in lower due to the mix of gross profit across divisions. SG&A for the quarter was $4.8 million, up 18.1% from the same quarter last year, mostly to support higher revenue and investment in growth. R&D expenses were $4.6 million for the quarter, up 5.5% from the prior year quarter, showing our strong commitment to innovation. Net loss for the quarter was $5.5 million, compared with a net loss of $21.3 million in the prior year period. Adjusted net loss was $7.8 million for the quarter, compared with an adjusted net loss of $9.8 million in the prior year period. Adjusted net income leaves out amortization of redundancies, stock-based compensation, and other non-core items. Please refer to the adjusted net income table in our third quarter press release. Now to our division results, beginning with aeronautics. This division brought in $7.8 million in revenue for the quarter, versus $8.4 million in the prior year quarter. The 7.6% decline was mostly caused by shipment delays as the company worked with its European unions to add a second shift to meet rising demand. As Eyal said, we expect most of those shipments, about $4 million worth, to happen in the fourth quarter. Gross profit in aeronautics was $2.6 million, down 15.2% year over year. That equated to a gross profit margin of 34%, compared with 36.9% in the year-ago quarter. The lower gross margin was mainly due to lower revenues against a fixed cost base. Now turning to results for our architecture division. Revenue there was $3.8 million in the quarter, compared to $3.2 million in the prior year quarter. The 21% increase reflects growing demand for this division worldwide. Gross profit in architecture was $1.2 million, up 37.2% year over year. That worked out to a gross profit margin of 31.4%, which is an improvement over 27.6% during the same quarter last year. The stronger gross margin came about because of increased revenues, a product mix that was favorable, and efficiencies in operations; let's now move on to the automotive division. In the automotive division, revenue for the quarter came in at $0.5 million, whereas in the prior year quarter it was $0.4 million. Our ongoing expansion in this division makes us proud, and it doesn't yet capture the committed backlog from our customers that is growing quickly. One case in point that we announced just today is the largest signed serial production program in our history, delivering our product into an average of 50,000 cars per year on average across nine years, beginning in 2025, with a major European OEM. The gross loss in automotive came to roughly $0.1 million in both periods. Turning to our safety tech division, revenue reached $11.2 million in the quarter, versus $6.6 million in the prior year quarter. That 68.1% gain was chiefly fueled by robust demand for our ADAS Smart Vision 2. Gross profit in safety tech was $2.1 million, which is a 39.1% year over year increase; this worked out to a gross profit margin of 19%, compared with 23% in the prior year quarter. That 400 basis point decrease stemmed primarily from product mix. Shifting to our balance sheet; during our last call, we described how early in the third quarter we finished a series of actions aimed at simplifying our balance sheet and capital resources over the long term. As a reminder, the provider of our original $60 million credit line, from which $25 million had previously been drawn, opted to take part in our IPO while cutting the total availability of their credit line down to the undrawn $35 million amount. Consequently, we directed a portion of our IPO proceeds toward repaying what we had drawn along with fees; we have a very supportive lending group, and by year-end we anticipate adding more borrowing capacity on favorable terms, which further strengthens our liquidity. We closed the quarter with $9.4 million of cash on the balance sheet, and that, paired with our undrawn $35 million credit line, brings total liquidity to $44.4 million, giving us ample financial flexibility to carry out our growth objectives and reach profitability. Before I hand it back to Eyal, let me provide some color on what we expect for the fourth quarter; the quarter has gotten off to a strong start, and we are reiterating the guidance we previously announced for $28 million-$34 million. We still expect gross margin in the second half to come in higher than in the first half, driven by the timing of revenues and the associated operating leverage. Lastly, we expect adjusted net loss to narrow in 2024 relative to 2023. I'll now hand things back to Eyal for closing remarks.

Eyal Peso

executive
#5

Thanks, Meir. What we see ahead for Q4 and past it looks incredibly solid, powered by heavy demand throughout each of our 4 divisions, plus the steady rollout of breakthrough technologies we believe will speed up how fast we grow. Specifically, within automotive, things are scaling quickly thanks to rising OEM orders around the world as serial production picks up, which shows how well our business model can scale. At the same time, real excitement is building in our remaining divisions — from airline cockpits continuing to expand into sophisticated cabin shading for commercial aircraft, to more installations of our inventive building facades with marquee clients, to huge uptake among bus fleets and truck OEMs globally. We feel sure investors will come to better recognize Gauzy's intrinsic worth, just as businesses like Ferrari and Ford, Yutong, or Boeing, along with plenty of others, have placed a key piece of their future growth in our hands. Thanks for your time today. At this point we'll open the line for questions.

Executive

executive
#6

To begin with, on the profit side, I'm aware you've mentioned reaching roughly break-even at the EBITDA level in Q4, with growth from one quarter to the next. Do you still anticipate that, or have some other problems come up? Let's begin there, then, when it comes to profitability.

Eyal Peso

executive
#7

Hello Matt, good morning, and thank you for raising that. Yes, I want to say again that we remain on track — on track, that is, for EBITDA at break even and positive, as we've said on earlier calls and in conversations with all of you. What we've made public, and it demonstrates that this is a central and significant priority for us, is that shipments running late, which we had to send out during Q3 and which slipped to Q4 largely because of manpower — our remedy has been to bring in a second shift instead of bringing on additional production teams, since that would weigh more heavily on that break even point. So our aim, as stated previously, is to get to break even and positive, and we're pursuing it while keeping our present expenses, on cost of goods as well as on OpEx, so my response to that is yes. And assuming we hit our targets during Q4, I think that's precisely where we'll land.

Matt Sheerin

analyst
#8

Matt, thanks for that question. Now, regarding the outlook, it seems you've grown more optimistic about automotive. You mentioned some wins. When will revenue really start to build momentum? Is that going to happen in the first half of next year, or the second half?

Analyst

analyst
#9

And when it comes to capacity, you clearly have to show customers you can scale up. You've faced some labor challenges elsewhere in the business. So how ready are you to expand capacity as those orders arrive?

Eyal Peso

executive
#10

That's a great question, Matt. I want to emphasize again that the capacity challenges aren't about production lines or machinery—it's purely an HR matter. Bringing in a second shift takes care of that in the aero division. It's quite different for automotive, where we ship on a roll-to-roll or cut-to-fit basis, and our existing capacity, with just a slight extension, is more than sufficient to handle the 25 figures we're forecasting. So different production lines have different requirements. Right now, as I've said, we're fully prepared to meet all the automotive demand we're facing. You won't see it in Q3, but I expect it will show up near the end of the first half of 2025. Our bookings are rising sharply, and I want to stress again that our serial production agreements—like the ones with Ferrari and that major European OEM—are eight and nine years respectively, with committed minimum volumes each year. Ferrari began ramping this year and will accelerate significantly next year, while the other OEM kicks off its serial production next year. That isn't reflected in the $38 million backlog. That backlog really represents what we must deliver in the next quarter, perhaps a quarter and a half. We don't include all the minimum yearly commitments in the backlog—only those tied to actual purchase orders. So to answer you, it'll be mid-2025, later in the first half of 2025, around Q2, when you'll see that demand translate into shipments. But the bookings are locked in through those signed and sealed agreements, as we mentioned, for many years.

Matt Sheerin

analyst
#11

All right, that's quite useful. Thanks a lot.

Eyal Peso

executive
#12

Thanks.

Analyst

analyst
#13

Hello, and good morning. Thanks for letting me ask a few questions. First off, I'd like to ask about how free cash flow is behaving. Could you give us a bit more detail on what's driving it? You brought up working capital. Maybe you could speak to how working capital is trending, when you expect to hit EBITDA break even, and then perhaps refresh us. You said something about the liquidity position getting better — any extra detail on that would be helpful. Thanks.

Meir Peleg

executive
#14

Thanks, Dan. Good morning. For the quarter, free cash flow came in at -$17.5 million, and it's mostly driven — if I bridge from EBITDA over to free cash flow, the main contributor is interest paid during the quarter, largely tied to the facility we repaid at the start of July and disclosed in our Q2 financials. That interest payment comes to $4.3 million in total. On the working capital gap, like we mentioned, a lot of the IPO expenses will actually be paid in Q3 instead of being included in Q2. So that's $3.5. Those are the primary items separating EBITDA from free cash flow. On top of that, CapEx came to $2.7 million, and that accounts for our entire free cash flow. As for liquidity, like you noted — and I want to remind you that the provider of the $60 million credit line took part, and we've drawn $25 million from it. We participated in the IPO, and we repaid his facility at the start of July, pardon me. By year-end we're in the process of bringing on more lending capacity, which we anticipate will come at favorable terms. Combined with what Eyal said about Q4 results improving on the EBITDA side and the full year 2025 being EBITDA positive, we're well funded as we chase our business objectives.

Eyal Peso

executive
#15

If I may jump in there, Dan, just to build on what was said — we've got that $35 million credit facility that hasn't been drawn down, and that bolsters our liquidity, providing everything we require on top of it. The additional financing we mentioned earlier is expected to close before year-end, and that should bring us further liquidity. Also worth noting: the roughly $1.3 million in extra CapEx put into Q3 takes the place of CapEx that had been planned for 2025. We intend to cut back the CapEx we're budgeting for 2025. It genuinely substitutes for it. We needed to finish our Smart Vision 3 production line sooner than planned. The product launch with Ford Trucks at IAA was announced, and it came early, so it already landed in Q3. Shipments of this product are anticipated to begin as soon as Q1. We pulled forward some CapEx from 2025. That amount will be taken out of our 2025 budget. It isn't additional — it's a replacement. That point matters too.

Dan Levy

analyst
#16

So if we tried to examine the pro forma free cash, just taking into account that you've reduced some interest, and you've got what sounds like lower CapEx.

Analyst

analyst
#17

What rate would be better to think about moving ahead?

Meir Peleg

executive
#18

For the extra borrowing?

Dan Levy

analyst
#19

I'm just attempting to get a clearer sense of the free cash flow run rate ahead, on a pro forma basis for the items you've discussed here.

Meir Peleg

executive
#20

No. Pardon me.

Eyal Peso

executive
#21

No—perhaps Dan and I are glancing at one another, just trying to grasp what you're asking more clearly. What you're referring to—well, once again, our liquidity position is sufficient. That CapEx figure has been adjusted; it has no impact whatsoever on what we intend to do, given that things are turning slightly favorable in the near term, both on a quarterly basis and across the entire year for the coming year. We'll repeat what we've said: even at this point, without any additional financing that our lenders put on the table with attractive conditions, our liquidity remains adequate to reach EBITDA positive and then achieve positive cash flow in the year after that.

Meir Peleg

executive
#22

Now, if you look at free cash flow for this quarter, and I factor in all those one-time items, there's $3.6 million tied to the facility we paid off — that's the biggest piece — plus another $3.5 million from working capital, which adds up to roughly $7 million that would come down on a pro forma basis. And naturally, the weaker gross profit this quarter played a role too, costing us another $1 million on top of that.

Dan Levy

analyst
#23

Thanks. And perhaps I could build on what Matt asked regarding the revenue side and bookings. We appreciate the detail you've shared about some of the wins.

Analyst

analyst
#24

Could you perhaps help us understand the amount of commercial activity or talks happening that aren't visible in what's been disclosed so far, yet might support confidence in revenue speeding up later and, ideally, more booking activity down the road?

Eyal Peso

executive
#25

Absolutely, Dan. I'll handle that one. We keep trying to make this point over and over. When we sign a serial production program with Ferrari spanning 8 years, honestly, I'd say they've placed a huge bet on Gauzy's technology. I'd say they invested — not money — but invested in us, in our product, as one of their key growth drivers for the coming 8 years. They agreed to a minimum take rate, which currently stands at a very, very high figure. They hadn't anticipated it being that high since initially it was an option. But they have invested. So we hold a signed contract with them, as with others, covering 8 years at a minimum take rate; so if I translated that into a committed order book figure, it would be 8 times larger than what we'd ship from Q2 through Q1 of 2025; that's the actual committed order book we hold. Typically, the minimums they set and commit to — they never actually hit a minimum. They always reach at least 15%. We normally sign a 15% uptake that we're committed to deliver, though it usually ends up being even more. Another solid opportunity we made public and announced, aiming to properly address your question. Currently, within our growing backlog of $38 million that we expect to ship next quarter, perhaps slightly into 2025, we have roughly $10 million of cockpit. Last month we announced that we now hold a committed order book of $240 million. How do these fit together? Just as I described with Ferrari. We've signed committed minimum orders spanning 5, 10, and more years in the aero business, along with how much cockpit for each model we must ship. But the POs behind that 10 million in the backlog arrive every month or two, and then we ship, invoice, and get paid. Okay, so if you want a sense of just how large and robust our business is, and how far out it stretches, here's what you do. Take that 10 million we currently have in backlog for cockpit, plus the 38 we still need to deliver this Q4 and a little way into Q125, then multiply by that 24 figure you were shown. That tells you how much of this product sits in our committed order book for years ahead. For aeronautics, 10 years isn't even a lengthy stretch. Automotive would run about seven or eight years on average. I'd say with Safety Tech and ADAS, you're likewise looking at roughly a 10-year average across signed serial production programs. With Ford Trucks, we've got 10. So that's how I'd encourage you to build some confidence around this really substantial order book — and when I say order book, none of it is up in the air. These are signed serial production programs carrying minimum commitments that we have to be prepared to ship. All right. Hopefully that addressed your question, Dan.

Dan Levy

analyst
#26

Great, thanks.

Analyst

analyst
#27

Thank you, and good morning. A great deal has already been covered, though I have a few questions. Meir, what's the right way to view the OpEx run rate? There's been plenty of attention on margin mix, cash, and EBITDA questions, but going forward, are you expecting a significant rise in OpEx across the coming quarter or two?

Meir Peleg

executive
#28

Comparing OpEx at year-end 2024, quarter by quarter, we've been fairly steady. Naturally, I'm making adjustments for the one-time IPO costs. Naturally, we must factor in that as a public company now, this marks our first complete quarter operating as one. There are public-company costs, specifically directors' compensation along with D&O insurance, plus some PwC and other legal fees that weren't present when we were private. Our expectation is that OpEx in the next quarter, primarily, and through 2025 as well, will come down somewhat on the R&D side, all right, but then level off. Still, with significantly greater revenue and gross profit, we anticipate reaching EBITDA positive in '25, as we expect.

Analyst

analyst
#29

Understood. Then perhaps the last part of my questions concerns that new European OEM you referenced, which begins contributing revenue near the end of the first half. My assumption is that the OEM itself has a 2026 model year vehicle, and you'd ramp shipments heavily during the summer to match that launch schedule? Or how should we view the OEM's positioning of that car?

Eyal Peso

executive
#30

Yes, precisely. So they are beginning to ship their product out to customers. This is for new EV models in late 2025, early 2026. But for us to be prepared, we do an average of 50,000 cars per year. All of these are glass roofs for EVs. We are beginning to ship. I would say it's going to be really heavy in late 2025; but it's already a sizable amount toward Q2, Q3, as you said, to ensure they have sufficient inventory, because time is needed until they were a tier two provider here with a very, very, very big and well-known tier one glass manufacturer that has chosen us for this together with the OEM; and they need to accumulate inventory so they can embed these roofs on cars and begin shipping it to customers. So you're correct. I would say slightly before August, but yes.

Analyst

analyst
#31

Understood. Perhaps just two or three more small questions, if you don't mind answering. To start with, does this involve a PDLC or SPD approach, or some mix of both?

Eyal Peso

executive
#32

Right, this is an LC. This is an LC. Correct, it's a specially formulated LC made for automotive use. I'm not able to. This also has additional aspects that are quite compelling. I'm not in a position to reveal them right now, but as soon as we make the OEM announcement, we'll share further information about the arrangement.

Jeff Osborne

analyst
#33

Understood. Then could you tell us whether monitoring the car is something buyers can choose, or does it come included on every vehicle? Also, what about content for each vehicle? Those 50,000 figures are useful and sound impressive, yet with this being a specialized product, how are we meant to think about the content?

Eyal Peso

executive
#34

Right, that 50,000 spans four models. That point matters; still, I want to note it appears there may be a combination — certain ones could see a 100% take rate, meaning it isn't optional, while for others it would be optional. I should add that with Ferrari too, what we announced was an option, yet take rates have reached a level where selling the car became dependent on it for them.

Jeff Osborne

analyst
#35

And finally, as a follow-up, is there some sort of range, or what's the right way for us to consider the content per vehicle for that?

Eyal Peso

executive
#36

Yeah, that's something I'd prefer to hold back for a later disclosure. Is that okay, Jeff? I do want to mention — I do want to mention that, yes, I'd rather save that for further disclosure. I'd also like to note that the 50,000 average per year represents a minimum take rate. That's the figure we have a financial commitment on. This isn't wishful thinking. Across the four models, it could be that number or higher.

Jeff Osborne

analyst
#37

Understood. That was everything I wanted to ask. Thanks for the thorough information. Many thanks.

Eyal Peso

executive
#38

Thanks to you.

Analyst

analyst
#39

Yeah, thank you. I just wanted to get some clarity. I believe you brought up something. Compared with a year ago or with the prior quarter, aeronautics revenue came in slightly lower during the period. Yet I think you said that within the backlog there sits $10 million of aeronautics revenue. If that backlog is delivered in full, is it reasonable to expect this business to return to roughly that $10 million plus each quarter in Q4?

Eyal Peso

executive
#40

Hi, Josh. Good morning. I'll handle that one. If I answer your question in the simplest way, yes, I would say that the majority of our late shipments that we announced last quarter, the ones we failed to ship on schedule, which happened because of European vacation patterns and because our unions only approved the second shift late in the quarter, most of those come from aero. So, I would also call that very conservative. Yeah, if we stay on track, as we claim, and ship all of those late shipments in Q4, you ought to see us back on track at a level relatively much greater than the 10 that we already shipped in quarters before. Okay? So yes, with the late shipments, it's going to be significantly higher. Yep.

Josh Nichols

analyst
#41

Understood. Regarding that trajectory across the opening six months which you both mentioned, I believe we've covered the automotive chance quite a bit. It's encouraging to see a few of the fresh ones in there. I was simply wondering about the margin profile — once you begin scaling up, say in the latter half of next year, with a number of these clients, what should we expect regarding the gross margin contribution, and how might automotive revenue potentially fuel some expansion there?

Eyal Peso

executive
#42

That's a fair observation, since with the figures we've presented to the market, we've set ourselves a substantial undertaking by splitting our business into four segments as a relatively new public company. We're glad to do so, because we want you and everybody else to enjoy the maximum transparency. That's the sort of company we aspire to be, and it naturally raises legitimate questions such as the one you posed, since those numbers don't reflect the enormous automotive scale we possess. What I can share is, first, margins will be quite robust in supporting the average we previously disclosed as a long-term gross margin. My expectation is that automotive will shortly lift that margin from the top, meaning it averages above the other business divisions. Clearly, that comes down to scale. I state this confidently since with Ferrari as well as this European OEM and others, particularly in SPD, we serve as a single source supplier. Naturally, we collaborate closely with our customers to ensure everybody profits from our products being embedded in their vehicles. Still, our position is quite strong given single source supply — it's a distinctive sort of opportunity for us as a tier two, tier one in this industry. Yet I want to repeat that it will be at scale, lifting our average margins from above.

Josh Nichols

analyst
#43

Thank you. That wraps up my questions. I believe one of your press releases mentioned an expectation of reaching $100 million in total revenue from your CMS offering by the close of next year.

Analyst

analyst
#44

What I'd like to know is, out of that $100 million, how much do you anticipate will come in next year versus what has already been brought in?

Eyal Peso

executive
#45

Right; I want to be cautious about giving specific forward-looking guidance on any particular business line, but I'll restate that point. What we said about having that in our backlog — if you look at Ford Trucks, Josh, the example we made public, we haven't yet revealed every piece of business we hold, though we will over time, moving toward the latter part of this year and into the start of next year. On our Smart Vision 3 platform, which we introduced at IAA, we have enormous momentum. But consider only Ford Trucks and a reasonable portion of the 25,000 trucks they sell annually, applied to the single truck model we've been chosen for starting at the beginning of next year across 10 years — you'd see those figures climb extremely rapidly. That's merely one of six models from a single OEM, and not the largest player in the truck sector. Currently we're depending on RFPs for volumes in the hundreds and thousands of trucks each year for each OEM, since ADAS in trucks — as I assert, and many agree — is turning into a requirement through regulation, and also due to ROI, because it will become mandatory in upcoming platforms of 2027, 2028, 2029; and when you consider the production, the manufacturing scale reported for OEMs; so Volvo Trucks will be producing 300,000 trucks annually. Across their three brands, they have 240,000 trucks, and I think they'll choose a single ADAS platform, which is essentially how a truck is driven. If you consider an ADAS system, I'm unable to reveal precise cost numbers. We do sell it, but on a per-truck basis and multiplied out, you'll arrive at those figures we cited as $100 million in the order book quite rapidly. In my view, two models from one OEM accounts for that, and we're discussing far more. Alright? So my brief response is that we're restating that point. I hope to give additional detail once we begin shipping our Smart Vision 3 in Q1 and to declare further wins similar to Ford Trucks that we're actively pursuing.

Josh Nichols

analyst
#46

Appreciate it. Thanks.

Eyal Peso

executive
#47

Thank you, Josh.

Eyal Peso

executive
#48

We appreciate you being with us on this call. We're eager to have more conversations ahead and share news that keeps you informed about how we're moving forward, and enjoy the remainder of your day. Thanks to all of you.

Operator

operator
#49

Appreciate that, sir. Everyone, that truly brings today's conference call to a close. Thanks once more for joining us, and right now, we'd ask that you kindly hang up your lines.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Gauzy Ltd. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.

Get the API View API docs →

For developers and AI pipelines

Programmatic access to Gauzy Ltd. earnings transcripts and 132,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Gauzy Ltd. or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.