Cummins Inc. (CMI) Earnings Call Transcript & Summary
May 5, 2026
What were the key takeaways from Cummins Inc.'s May 5, 2026 earnings call?
In the first quarter of 2026, Cummins Inc. reported revenues of $8.4 billion, reflecting a 3% increase year-over-year, driven by strong demand in power generation markets, particularly from data centers. However, North American heavy and medium-duty truck demand weakened significantly, with unit volumes down 20%. Management raised their full-year revenue guidance to a range of 8% to 11%, up from 3% to 8%, indicating improved expectations for North America heavy-duty truck sales and global power generation demand.
What topics did Cummins Inc. cover?
- Revenue Growth Acceleration: Cummins achieved first quarter revenues of $8.4 billion, a 3% increase compared to the previous year, driven by strong power generation demand. Management stated, "Growth was driven primarily by higher demand in power generation markets, particularly from data centers."
- Improved Full-Year Guidance: Management raised their full-year revenue guidance to a range of 8% to 11%, up from the previous forecast of 3% to 8%. This reflects stronger-than-anticipated demand in North America and improved expectations for global power generation, as noted, "We are raising our forecast for total company revenues in 2026 to a range of up 8% to 11%."
- Challenges in North American Truck Demand: North American heavy and medium-duty truck demand faced significant challenges, with unit volumes down 20% year-over-year. Management highlighted, "We are seeing weaker North America heavy and medium-duty truck demand with unit volumes down 20% from a year ago."
- Strong Performance in Power Systems: The Power Systems segment reported record EBITDA margins of 29.5%, up from 23.6% year-over-year, driven by increased volumes and favorable pricing. Management stated, "Power Systems revenues were $2 billion, an increase of 19% and EBITDA was a record increasing from 23.6% to 29.5% of sales."
- Accelera Segment Developments: The Accelera segment saw revenues decrease by 2% to $101 million, with an EBITDA loss of $277 million, including a charge related to the sale of the Low-pressure Fuel Cell business. Management noted, "We completed the sale of the Low-pressure Fuel Cell business to Alstom, representing another step in reducing operating losses in Accelera."
What were Cummins Inc.'s May 5, 2026 results?
- Revenue: $8.4 billion (+3% YoY)
- EBITDA: $1.3 billion (15.4%)
- Net Earnings: $654 million ($4.71 per diluted share)
- Operating Cash Flow: $309 million
- Accelera Revenue: $101 million
- EBITDA Margin Guidance: 17.75% to 18.5% (up from prior guidance)
Cummins' strong first quarter results and improved guidance signal a positive outlook for the company, particularly in power generation and North American truck markets. However, the challenges in the truck segment and the performance of the Accelera business remain key risks. Investors should monitor the execution of management's strategies and the evolving regulatory landscape as potential catalysts or headwinds.
Earnings Call Speaker Segments
Nick Arens
executiveThanks, Donna. Hello, everybody, and thanks for joining our call this morning as we go over Cummins' results for the first quarter of 2026. With me here are Jennifer Rumsey, who serves as our Chair and Chief Executive Officer, and Mark Smith, our Chief Financial Officer; all three of us will be on hand to take your questions once the teleconference wraps up. Before we dive in, I want to remind you that certain information you hear or receive today will include forward-looking statements as defined under the Securities Exchange Act of 1934. These statements convey our forecasts, expectations, hopes, beliefs, and intentions concerning future strategies. A number of risks and uncertainties could cause our actual future results to differ materially from what those forward-looking statements project. You can find additional details about these risks and uncertainties in the forward-looking disclosure statement included in the slide deck as well as in our filings with the Securities and Exchange Commission — in particular, the Risk Factors section of our most recently filed annual report on Form 10-K, along with any quarterly reports on Form 10-Q filed after that. On this call, we'll also be covering certain non-GAAP financial measures, and we'll point you to our website for reconciliations of those measures to GAAP financial measures. Our press release, which includes a copy of the financial statements, and a copy of today's webcast presentation can be found on our website in the Investor Relations section at cummins.com. With all of that covered, I'll hand things over to our Chair and CEO, Jennifer Rumsey, to get us started.
Jennifer Rumsey
executiveThanks, Nick. Morning, everyone. I'll begin by recapping what we achieved in Q1 along with the financials, and after that I'll go through sales and end market trends region by region. I'll wrap up with our 2026 outlook. Then Mark will take you through more detail on how Q1 went and what we're forecasting for the full year. Before diving into the specifics of how we performed, I'd like to call out a few big items from the quarter. In February, Cummins hit an important milestone when the world's first commercial hybrid electric ultra-class mining truck went into service — it's now running and producing at the Caserones open pit mine in Chile. This pilot is our initial retrofit of a 300-ton Komatsu haul truck that uses First Mode hybrid technology in daily operation; it shows how we're pursuing solutions that cut CO2 emissions now while still moving customers toward their longer-term decarbonization objectives. In March, Mack Trucks said the Cummins X10 engine would be integrated into the Mack Granite chassis. That milestone speaks to the close teamwork between Mack and Cummins and to our mutual dedication to reliable, high-performing offerings for vocational customers. The X10 fits demanding work applications well, and putting it into the Granite platform gives customers a strong choice in the vocational truck segment. Last, during the quarter we took targeted steps in Accelera by finishing the divestiture of our low-pressure fuel cell business along with the related customer commitments for it. That sale will support continued gains in how our financial results are trending within Accelera. Taken together, these moves show how we're carrying out our strategy across the businesses. Now I'll move to overall company performance for Q1 of 2026 and touch on some of our key markets. Q1 sales came to $8.4 billion, up 3% versus Q1 of 2025. The growth was mainly due to stronger demand in power generation markets, especially from data centers; weaker North America heavy and medium duty truck demand partly offset that, with unit volumes falling 20% from a year ago. EBITDA was $1.3 billion, or 15.4%, which included a net charge of $199 million tied to the sale of our low-pressure fuel cell business. Leaving out that net charge, EBITDA was $1.5 billion, or 17.7%, against $1.5 billion, or 17.9%, a year ago. Lower North America truck volumes and higher compensation expenses were partly offset by stronger power generation demand, favorable pricing, and greater joint venture income. In Power Systems, we posted record EBITDA dollars, which reflects ongoing operational improvements and robust end market demand. Our Q1 revenues in North America fell 6% versus 2025. Industry production of heavy-duty trucks during Q1 totaled 50,000 units, a 23% drop from 2025 levels, while our heavy-duty unit sales came in at 18,000, down 16% year-over-year. During Q1 of 2026, medium-duty truck output across the industry came in at 27,000 units, which represents a 20% decline versus 2025 levels, and our own unit sales reached 25,000, a 19% drop year-over-year. We delivered 30,000 engines to Stellantis for their Ram pickups during Q1 of 2026, marking a 4% gain over 2025 levels. North America power generation revenues rose 23%, mainly because data center demand has remained very strong. Our international revenues grew 16% in Q1 of 2026 relative to a year earlier. In China, Q1 revenues including joint ventures totaled $2.1 billion, up 19% year-over-year, fueled by accelerating data center demand and robust off-highway export activity from our OEM customers. Chinese industry demand for medium and heavy-duty trucks reached 353,000 units, a 20% increase from last year, powered by strong export demand. Our unit sales including joint ventures hit 55,000, up 14%. Chinese industry demand for excavators in Q1 was 73,000 units, a 19% rise from 2025 levels; we sold 14,000 units, up 25%, mainly on strong export demand. Power generation equipment sales in China climbed 84% in Q1 thanks to accelerating data center demand. India Q1 revenues including joint ventures were $814 million, a 12% increase from Q1 a year ago. Industry truck production rose 21% from 2025, driven by tax incentives that are speeding up underlying demand. Now let me give our 2026 outlook, along with some remarks on individual regions and end markets. We're happy to report that our expectations for 2026 have strengthened since the initial guidance we issued in February. We're lifting our forecast for total company revenues in 2026 to a range of up 8%-11%, compared with our earlier guidance of up 3%-8%. We're raising our 2026 North America heavy-duty truck forecast to a range of 230,000 to 250,000 units, up from our previous guidance of 220,000 to 240,000 units; this bump reflects a pattern of strong orders lately and improving spot rates. We now anticipate H1 of the year will be stronger than we previously expected, while H2 stays largely in line with our earlier outlook, including a modest pre-buy ahead of the 2027 EPA regulations. For the North America medium-duty truck market, we're boosting our forecast to 125,000 to 135,000 units in 2026 versus our prior guide of 110,000 to 120,000 units, reflecting demand in H1 that's stronger than anticipated and momentum we expect to carry into H2 of the year. In line with our earlier guidance, our engine shipments for pickup trucks in North America should be 125,000 to 140,000 units in 2026. In China, we now expect total revenue including joint ventures to rise 10% in 2026, an improvement over our prior outlook of down 1%, driven by stronger data center demand. When it comes to demand for heavy and medium-duty trucks, our expectation remains a range spanning a 10% decline to no change against the previous year, which aligns with what we guided before — it mirrors moderation plus the advantages of scrapping policy, though continued export strength partly offsets that. Turning to India, total revenue, joint ventures included, is now projected by us to rise 2% in 2026, which is up from the earlier guide of a 5% decline. For industry truck demand this year, we anticipate somewhere between down 5% and up 5%, versus prior guidance of down 10% to flat, and that's underpinned by tax rate reductions lifting underlying demand. On global construction, demand is now expected by us to land between flat and up 10% year-over-year, better than our earlier outlook of down 10% to flat. Within China, robust export demand should partially counter persistent domestic softness, whereas in North America we see demand staying mostly flat amid lingering tariff and interest rate uncertainty. Our major global high horsepower markets should hold strong through 2026, we believe. As for global power generation, revenues are now projected to climb 15%-25%, raised from the previous guidance of 10%-20%. That mirrors accelerating data center demand, backed by capacity additions introduced in North America at the close of 2025. We're additionally witnessing international growth exceeding expectations, notably in China and the wider Asia Pacific region, together with rising appetite for lower output gen sets serving customer needs amid persistent capacity constraints and larger configurations. Over in mining, engine sales should come in flat to up 10%, propelled by replacement demand and in line with our earlier outlook; on aftermarket, we anticipate a 2%-8% increase for 2026, also in line with prior outlook, aided by aging fleets, greater parts consumption, and more rebuild activity. To sum up, following a robust Q1, we're lifting our full year sales outlook to an 8%-11% increase and raising EBITDA margin guidance to 17.75%-18.5%; this captures improving momentum in North America heavy and medium-duty truck markets, with volumes bouncing back from cyclical lows quicker than we'd expected, a higher outlook for global power generation, gains in Accelera, and sustained strong execution throughout our businesses. On top of that, during this quarter we gave back $519 million to shareholders, $243 million of which came through share repurchases, in keeping with our long-standing commitment to return roughly 50% of operating cash flow to shareholders. I'd like to thank our employees and leaders worldwide for their dedication to our customers and to one another. Their focus and execution are producing strong financial results. All while we keep strengthening our ability to invest in future growth, advance sustainable solutions, and create long-term value for shareholders. I'm looking forward to discussing our long-term strategy and updated financial targets at our Analyst Day on May twenty-first. At this point, let me hand things over to Mark.
Mark Smith
executiveThanks, Jen, and good morning to all of you. We turned in robust revenue and profitability during the first quarter. Let me begin with a few key points we'd like you to take away today. First, demand has strengthened across several end markets, which gives us a better outlook for engines, components, distribution, and power systems. Second, we closed the divestiture of the low-pressure fuel cell business to Alstom, marking one more step toward lowering operating losses at Accelera, and we raised—or rather improved—our 2026 forecast for EBITDA losses in that segment. Third, we capitalized on equity market volatility during the first quarter to buy back shares, in line with our plans for returning excess capital to shareholders. Now let's examine the first quarter in somewhat more depth, and hopefully these remarks can get ahead of some of your questions. First-quarter revenues came in at $8.4 billion, a 3% increase over last year. North American sales fell 6%, while revenues outside North America rose 16%, led by China, where data center demand keeps accelerating. EBITDA was $1.3 billion, or 15.4% of sales, versus $1.5 billion, or 17.9%, a year earlier. Results for the first quarter of 2026 included a net charge of $199 million tied to the divestiture of the low-pressure fuel cell business. Barring those net charges, EBITDA was $1.5 billion, or 17.7%, a decline of 20 basis points from a year ago. Reduced North American truck volumes and greater compensation costs were partly offset by stronger power generation demand, favorable pricing, and higher joint venture income. Tariffs had an immaterial effect on our EBITDA dollars in the first quarter. While the precise amounts, both in total and by segment, will fluctuate quarter to quarter, we currently anticipate that tariffs will remain immaterial to our EBITDA through the rest of 2026, since we've worked diligently with our supply chain partners and customers to soften the impacts. Now let me provide more detail by line item. Pardon me. Gross margin for the quarter was $2.2 billion, or 26.7% of sales, versus $2.2 billion, or 26.4%, last year. The better margins came from favorable pricing and higher power generation sales, partly offset by lower North American heavy and medium-duty truck volumes and greater compensation costs. Selling, administrative, and research expenses totaled $1.2 billion, or 14.3% of sales, compared with $1.1 billion, or 13% of sales, 13.6% of sales a year ago. This rise was driven mainly by greater compensation, particularly variable compensation costs. Joint venture income of $148 million was up $17 million from the prior year, mainly because of stronger performance in our on-and off-highway joint ventures in China, which benefited the engine and power system segments. Other income was negative $178 million, versus a favorable $23 million from the prior year. This decline stemmed primarily from $199 million of net charges tied to the divestiture of the low-pressure fuel cell business. Interest expense was $76 million, down $1 million from the prior year. During Q1, our effective tax rate on an all-in basis came to 27.2%. That figure reflects an unfavorable discrete tax item tied to divesting the low-pressure fuel cell business, plus $7 million, equal to $0.05 per diluted share, of other favorable discrete items. All-in net earnings for the quarter reached $654 million, or $4.71 per diluted share, and that included $1.44 per diluted share from the low-pressure fuel cell business sale. If you set the sale aside, net earnings came to $853 million, or $6.615 per share, versus $824 million, or $5.96 per diluted share, in the same period a year ago. Operating cash flow showed an inflow of $309 million, against an outflow of $3 million in Q1 of 2025. On top of that, we handed back more than half a billion dollars of cash to shareholders during Q1; we bought back $243 million worth of shares at an average price of $536.97, and we paid out $276 million in cash dividends during the quarter, which aligns with our long-held commitment to return roughly 50% of operating cash flow to shareholders. Let me now add a bit more color on how the segments performed. Turning to the engine segment, Q1 revenues came in at $2.7 billion, down 4% from a year ago. EBITDA margin was 10.4%, lower than 16.5% a year ago, as softer North American truck volumes, greater compensation expenses tied to overall company performance, elevated research and development expenses ahead of our 2027 launches, and higher product coverage costs were partly offset by increased joint venture income; for the full year 2026, we now expect engine business revenues to rise 7%-12%, an upgrade from our earlier guidance of flat to a 5% increase; we've also lifted our EBITDA margin projections to a range of 12.5%-13.5%, which is 50 basis points higher at the midpoint of the guide. That gain mainly stems from stronger expectations for North America heavy and medium-duty truck demand, with demand during the H1 of the year turning out notably stronger than we had expected only three months ago. Component segment revenue totaled $2.5 billion, down 5% versus a year ago. EBITDA was 13.3%, lower than 14.3% a year ago, as softer North American truck volumes and higher material costs were partly offset by pricing. For components, we now anticipate 2026 full year revenues to rise 5%-10%, an upgrade from our earlier guide of flat to up 5%, thanks to stronger demand for heavy and medium-duty trucks in North America. We expect EBITDA margins in the range of 13.5%-14.5%, 50 basis points above our prior guide at both the low and the high end, on the strength of higher earnings in North America and China. Over in the distribution segment, revenues grew 7% from a year ago, reaching $3.1 billion. EBITDA as a percent of sales rose to 14.2%, compared with 12.9% a year ago, fueled by greater power generation demand, partly offset by higher variable compensation expenses. Our outlook for distribution revenues across the whole of 2026 has shifted upward — we're now projecting a rise of 9%-14%, compared with the 5%-10% gain we had previously guided, with the primary driver being stronger appetite for power generation equipment. On EBITDA margins, we're looking at 13.7%-14.7%, which is an improvement over the 13.25%-14.25% we forecast earlier. Turning to Power Systems, revenues came in at $2 billion, which represents a 19% increase, while EBITDA set a record, climbing from 23.6% to 29.5% of sales, with the lift coming from greater volumes, favorable pricing, net tariff recovery alongside higher joint venture income, and one-time cost recoveries. Looking at 2026, our expectation for Power Systems revenue growth is now 14%-19%, raised from the earlier forecast of 12%-17%, reflecting stronger demand, particularly in international markets. For EBITDA margins there, we anticipate roughly 25%-26%, versus the 23%-24% we guided previously. Margins over the rest of the year should remain solid, though somewhat under Q1 levels, given how uneven tariff costs and recoveries tend to be, plus the boost Q1 received from certain modest one-time non-tariff cost recoveries. At Accelera, revenues fell 2% to $101 million, weighed down by weaker electrified powertrain sales, which was partly offset by greater electrolyzer sales as we fulfill our outstanding sales commitments in that business.
Mark Smith
executiveEBITDA came in at a loss of $277 million, and that figure includes a net charge of $199 million tied to divesting our low-pressure fuel cell business. If you set those charges aside, EBITDA showed a loss of $78 million, which is an improvement over the $86 million loss in the pre-prior year, and it reflects the payoff from steps we have been taking across the past couple of years that are beginning to gain traction throughout the segment. For 2026, our expectation is that Accelera revenues will land somewhere between $300 and $350 million, which is unchanged from three months ago. Net losses, once you exclude the charge connected to the fuel cell sale, should now improve into a range of $270 to $300 million, which is better than the $325 to $355 million of EBITDA losses we had projected previously. That improvement comes from actions already taken to cut losses in existing operations, plus the gains from targeted decisions made in the Q1; in short, we now anticipate a stronger top and bottom line for the full year. Total company revenues should rise somewhere between 8% and 11%, with EBITDA landing in the 17.75% to 18.5% range. Power Systems and Distribution, of course, have been the ones grabbing headlines in recent quarters, but what I hope you take from what I've said is that we see a better profit outlook across every one of our segments for the rest of this year. Our effective tax rate should come in at roughly 23% in 2026, before any discrete items. Capital investments should fall in the range of $1.35 to $1.45 billion, since we keep making the critical investments needed to support future growth. To sum up, we turned in strong profitability in the Q1 even though production levels were weaker in North America on highway markets. As those markets strengthen over the course of the year, combined with continued robust global demand for power generation equipment, we are well-positioned to improve our financial performance even further this year. What we have done in Accelera is improving the cost structure and cutting ongoing losses, even as we keep investing in the products we believe have stronger prospects for adoption and future profitable growth. Cash generation remains a clear priority, since it enables continued investment in our portfolio, returning excess cash to shareholders, and maintaining a strong balance sheet that lets us weather any economic volatility and keep investing for the long run; we look forward to seeing some of you in person when we provide an update on our medium-term financial targets at our Analyst Day on May the 21st; that's enough from me. Let me turn it over to Nick.
Nick Arens
executiveMark, thanks. To be fair to everyone else on this call, please keep it to a single question plus one related follow-up. Should you have another question, kindly get back in the queue. Operator, let's take our first question.
Angel Castillo
analystHi there, good morning, and well done on this strong quarter. Mark, I'd like to return to what you said about power systems. Could you break down, I suppose, how large that one-time item was in Q1 — the non-recurring piece, or rather, the one-time cost or benefit? And then, regarding how the remainder of the year will unfold, I'm curious whether you could help us grasp whether it's simply normal seasonality once you strip out that one-time item, or how we ought to think about the margin cadence for that segment?
Mark Smith
executiveYep. I don't want to boil down what Power Systems has accomplished to just a quick answer, because that business is doing amazingly well and is investing capital to expand capacity so it can meet demand that's even stronger — we'll get into more of that in May. Sure, when you work through the guidance, you can derive the usual seasonal pattern for the remaining part of the year; generally Q4 tends to be a shorter quarter for production, so we'd anticipate that, but beyond that, margins shouldn't swing dramatically from one quarter to the next. Like I said, several elements played a role in the margin results coming in better than we had anticipated. China is seeing higher demand, and that market typically skews toward the first half; in the back half, that particular line item will likely come in softer—that's simply how purchasing behavior works there. There were also net tariff recoveries, which, as I mentioned earlier, amounted to nothing significant for the company; for multiple quarters now they've been negligible and will stay that way, though for power systems they provided a net lift. On top of that, we saw a bit of one-time cost recovery. If you account for a somewhat weaker Q4 and the reduced production days, the remaining portion of the quarter ought to come out fairly flat.
Kyle Menges
analystThanks for taking my question. I'd appreciate an update on the EPA 2027 engines. First, based on what you've been seeing and hearing so far, I'm wondering if the new heavy-duty engine could really deliver significant fuel efficiency improvements. Second, it would be helpful to get an update on the medium-duty engine — when it may be ready, and what the possible consequences would be if it isn't ready until, for instance, later in 2027.
Jennifer Rumsey
executiveThanks, Kyle. We're still very enthusiastic about bringing our HELM platforms to market. With those engines' diesel version, plus the EPA 2027 rule, we expect to deliver significant performance benefits for our customers — better fuel economy, along with other gains in service and performance optimization. As I've mentioned before, having this much uncertainty about a regulation at this point in the development cycle is truly not normal. For the past year we've collaborated closely with the EPA while they've been assessing how to proceed with the rule, which they've stated they intend to do, in a way that removes some of the expense tied to it. We expect adjustments to the longer emissions warranty and the emissions useful life provisions that appeared in the earlier iteration of that rule. Given some last-minute shifts, we've decided to push back when our B-platform comes out, moving it to January 28. That will mark the last rollout for our diesel HELM platform, while X15 and X10 remain on track for 2027 as we've been planning. As I mentioned before, the B-platform stands out because it reaches our widest set of buyers and covers the most varied uses; we've kept EPA informed regarding our launch intentions, and we're eager to review the draft of their updated rule, which we expect during this quarter, and to receive the final rule before we begin introducing our new platforms next year. We're thrilled about the benefits our customers are receiving, and we'll keep collaborating closely with the EPA while they put the finishing touches on their plans.
Kyle Menges
analystUnderstood. I'm simply wondering what the consequences might be, or perhaps the spectrum of possible results for the coming year, should that medium-duty engine not be available before 2028. Thanks.
Jennifer Rumsey
executiveThrough 2027, we will keep selling the B-Series platform in its present form; doing so lets us gradually roll out our products to customers and across our facilities. Also, as we've mentioned, we still expect a certain level of pre-buy during the second half of this year, especially within the heavy-duty segment.
Jerry Revich
analystYes. Hi, good morning, everyone.
Mark Smith
executiveHey, Jerry.
Jerry Revich
analystCan you all tell us how far out lead times stretch for the 95-liter engines? Word is that for certain customers it reaches the back half of 2028, even when production is higher. Could you say how far out you are? Mark, for several years your team has reliably posted very appealing incremental margins in that business as production keeps climbing. Is there anything to note when we consider what incremental margins could be over the medium term versus the 45% incremental you have reliably achieved?
Jennifer Rumsey
executiveThank you, Jerry. As you're aware, we doubled capacity on the 95-liter and wrapped up that investment last year, truly benefited from it, and we keep seeing robust demand plus multi-year talks with our customers about what they need, which supports the stronger guidance for this year. We have kept examining longer-term demand projections and whether we should make further capacity investments throughout our plants and supply chain. At our upcoming Analyst Day, Jennifer Rumsey will share more about how we view those investments and that capacity.
Mark Smith
executiveOkay, so yeah, I believe in the coming two weeks, there will be a really compelling presentation regarding Power Systems. You know, we feel a lot of excitement about what lies ahead. Honestly, Jerry, those prospects have just gotten even better.
Jennifer Rumsey
executiveDefinitely.
Mark Smith
executiveyes, even over the recent handful of months. We feel quite positive. Sure of it — perhaps positive isn't the best term. We have belief in how the Power Systems business is doing. At this moment, our attention is on — As we boost output, we've managed to lift margins. Beyond that, we keep putting money into future growth, and you'll learn additional details on those intentions shortly. Of course, with sales rising, it's clear our aim is to widen margins.
Jerry Revich
analystYeah. Great. So I wanted to ask about engines — it's good to see the margin guidance raised for the year. It sounds like you could potentially finish with an EBITDA margin above 14%. Whenever a new regulation comes along, you all have a tendency to push margins up. Could you walk through the puts and takes as we consider EPA 2027 and what the EBITDA margin opportunity looks like for you on the new platforms, given that it's been some time since a new platform has launched in the U.S.?
Mark Smith
executiveYeah, it's been a while since we've had this many new platforms at the same time. Sure thing. So there will clearly be some meaningful content additions, mostly tied to the powertrain for the new truck. The engine business will see gains from that, and so will the component side. We aren't offering guidance for next year here, but we do anticipate some ups and downs in demand as we move from this year's second half into the first half of next year. And yes, I believe Brett will have a favorable update for you in a couple of weeks. We've come through a stretch of heavy investment driven by all the platforms, and not only the ones we have now. In recent years, we've introduced several other platforms that performed nicely, and we're now exiting the heaviest spending phase. Yes, we'll be telling you that we anticipate better results as time goes on.
Steve Volkmann
analystGreat. Good morning, everyone. Could I pick up where we left off on that topic, if that works? So the incremental engine figure for this year sits around the low teens, I believe, assuming my arithmetic is correct. Mark, you mentioned that certain new platform spending will taper off going forward, yet my understanding is that warranty costs typically run higher at the point these new platforms are introduced. I'm simply attempting to figure out what a reasonable value looks like for incremental margins within engines.
Mark Smith
executiveTo begin with, your assessment is spot on. At the moment we introduce a completely new platform, we begin with a fresh warranty accrual rate, and typically that stays constant across the initial six quarters, until sufficient field experience accumulates. What history demonstrates across time is that we have managed to lower those accrual rates by a considerable amount. Without a doubt, watching that progress—substantial progress across time and on quality—ranks among the standout moments of my tenure as CFO. Indeed, next year we'll begin on new engine platforms introduced carrying elevated accrual rates. That will represent a share of our business. Demand might be softer during the H1 of the year, since to whatever degree a pre-buy exists, distinguishing precisely what counts as pre-buy rather than modestly better freight conditions is always tricky. Demand may turn out weaker. Indeed, over—suppose we make it past the H1 of next year and move into 2028—we ought to witness better incremental margins in the engine business. The tariffs, naturally, are likely the largest single weight on the company and have landed mostly on the engine business, so much so that although we've performed well attempting to offset them and reduce the dollar effect, that has also been partially diluted during last year and this year, on top of the peak investment period. Indeed, my expectation is that incremental margins will strengthen relative to what we're seeing this year once we get past the coming 18 months.
David Raso
analystHello, and thanks for making room for me. For the remaining portion of this year, revenue across each of the four big segments climbed somewhere between 12% and 16%. That's encouraging breadth, with incremental and engines plus power each exceeding 30% for the balance of the year. What I wanted to dig into is why distribution's incremental for the rest of the year sits at just 7, while components comes in at 19. I'm trying to grasp this, especially for distribution, but also because components might be absorbing a larger share of those investment dollars. I just want to figure out the reason those two businesses show such modest incremental figures for the remainder of the year. Thanks.
Mark Smith
executiveOne element at play in distribution, I'd say, is that growth in parts isn't matching the pace we're seeing in what we call whole goods, meaning power generation equipment — that's one thing. Beyond that, I'd point out that a year ago we carried more pricing, especially around the midpoint of the year, and that's among the reasons margins improved so strongly in the second. You're now running into difficult comparisons, Q2 and Q3 especially. Over the long and medium term, we remain bullish about growth in distribution and expansion of margin — those are a few of the elements. Q1 went pretty well for us. We simply need to keep repeating what's working, and eventually mix differences along with other elements will resolve on their own. I'd say the outlook looks quite promising. That's likely the primary element at play. There isn't any one-time special item or anything of that sort, David.
David Raso
analystDavid, thanks for the follow-up about when the 2027 heavy-duty models will be available. What feedback are you getting from buyers regarding 2026 production slots? At what point do they think those will be exhausted, forcing them to request that you roll out the 2027 engine? Appreciate it.
Jennifer Rumsey
executiveThanks, David. As you've surely noticed, just as we have, truck orders have been climbing for a number of months now. Spot rates are looking better. Improved economics for truck customers are combining with expectations around the EPA 2027 rules. The industry, naturally, had hit a cyclical bottom. What we're observing is a gradual upturn. Actually, at Rocky Mount we're bringing on a third shift right now; medium duty demand truly began picking up in Q1 and looks quite robust as we move into Q2; heavy duty is also rising. We're keeping an eye on the supply base to check whether constraints might emerge; we've reached a stage where a portion of our top end guide depends on how far everyone can raise build rates and supply to satisfy that before the 2027 regulatory changeover. Our focus is squarely on ensuring we can deliver against our customer commitments while doing so. In fact, last week we held a major supplier conference with all our key suppliers to confirm they're prepared to back all our businesses; we're increasing capacity at our plants and putting money into new products.
Jamie Cook
analystMorning, and congrats on a solid quarter. One thing I wanted to ask you, Mark — when we look at the second half and, I suppose, further out, there's a lot of chatter about whether you can deliver that extra 25% margin, especially since some of the tariff worries might not end up being the tailwind we'd assumed. And if the medium duty engine doesn't satisfy the 2027 emissions rules, that could shift things too, plus the puts and takes around Accelera losses. So how confident are you there? Then my second one: the rate at which Accelera losses are shrinking. Clearly there was good progress this quarter and in what the guidance implies. How are we meant to think about that as a possible offset to losses in 2027 and afterward? Thanks.
Mark Smith
executiveFine. In two weeks, through 2030, we'll tackle incremental margins quite specifically, I think. We'll provide an update and set it against what we told you two years back. In aggregate, that ought to be pretty clear. There are plenty of moving pieces at the moment, I'd say. That's accurate. Of course, we've lifted this year's guide, and our confidence keeps getting better. Probably the first half of next year will be somewhat uneven. Broadly, though, we believe the hard steps have been taken in Accelera. We're working through some leftover electrolyzer commitments. Those losses, sure, may swing from quarter to quarter, but at present they're clearly heading down. For our underlying performance, that's a good thing. Yeah, the story remains that the heaviest investment stretch is behind us, I'd say. Sure, certain program costs might run into next year, yet the main narrative should stay largely unchanged. I believe we can respond to each of those items quite well without giving away what's coming in a couple of weeks.
Jennifer Rumsey
executiveLet me just chime in, Jamie, regarding the Accelera unit — honestly, that group has performed exceptionally well amid a landscape shifting quickly when it comes to zero emissions technology adoption along with green hydrogen, and at this point we've managed to really sharpen the focus of that operation. As Mark pointed out, with the steps taken late in the year concerning the electrolyzer operation, we still require certain customer commitments in that area, and as time goes on, that will keep ramping down; a significant move happened in Q1 involving the low-pressure fuel cell divestiture plus the accompanying customer commitment tied to it; our attention right now is squarely on pacing investments in battery electric powertrain as that market develops, and we've secured some solid customer wins in that segment. Going forward, that piece of the Accelera business is where we'll concentrate.
Steven Fisher
analystThank you. Morning, everyone. I'd like to inquire about the heavy-duty truck sector. As a follow-up, I believe you mentioned that your second-half outlook remains unchanged right now. I'm simply wondering what your thinking is there, since it sounds like you described a market that's getting better and strong orders; maybe the response is the one you gave David Raso regarding worries about whether the supply chain can keep up, but I'm curious how you view the possible upside for the year's H2 when it comes to trucks.
Jennifer Rumsey
executiveYes. If you look back at the guidance we first provided, we essentially anticipated this year being the reverse of last year — a soft H1 followed by an H2 that improves. What we're now observing is that pickup arriving earlier. It's rising, and even so, we believe that once you reach the H2, the build rates we'd forecast are likely still on target, given a few of those supply limitations and the chance of supply disruption risk; naturally, we'll make every effort to satisfy whatever demand materializes. From our standpoint, it should be a solid H2, though there's likely some limitation in the number of days available in the year for upside.
Mark Smith
executiveI won't go too deep into specific quarters, but we've got a solid second quarter coming up, correct? To back that up, the first half has come in above what we expected, and that's mainly what's pushing the guidance. The second quarter ought to be strong.
Steven Fisher
analystAll right, that sounds good. You mentioned that the net effect from tariffs was largely the same and continues to be immaterial, and that supply chain gains played a role in that. Could you walk through some of the dynamics underneath that ultimately canceled each other out — the various rules, where you picked up advantages, where any added pressure appeared, and the way you counterbalanced all of it?
Mark Smith
executiveIf we went through that segment by segment, we'd be here the entire night. Let me simply remind you that, yes, Power Systems saw a net gain, and that won't carry forward. At this company, the net consequences for EBITDA have been immaterial — and by immaterial I mean extremely, extremely minor; we might spend ages discussing it and still arrive at a tiny figure in dollars. What matters most, I'd say, is that tariffs keep shifting, correct? The gross effect on Cummins is likely — since, as you may remember from the prior quarter, I attempted to lay it out as simply as I could — we had anticipated reaching net neutral, and we figured that would cost roughly half a percent of our EBITDA across the whole year, purely from clawing back a sizable amount tied to tariffs. That sizable amount remains sizable. It's likely only slightly smaller at this point — a 20 to 30-basis point impact for the full year. Plenty of variables in play, though the overall outlook is a touch reduced.
Jennifer Rumsey
executiveI'll just throw in a small point — the tariff situation keeps evolving, and our attention stays squarely on handling it alongside both our suppliers and our customers. Keep in mind that our manufacturing and sourcing happen mostly inside the United States. Engines get built here for American buyers; generator sets get built here for American buyers. A large share of what we bring in originates domestically. What I'd note is that since entering this year, at least on the truck side with the 232 tariffs, we've been cooperating very closely with the Department of Commerce so they grasp how we fulfill our shared objective of promoting American manufacturing, and how the engine offset program will function. Finalization hasn't happened yet, though our guidance does incorporate our expectations regarding how that plays out for the engine and components business we run. That's essentially a major shift, ensuring we receive the proper credit, so to speak, for the manufacturing, sourcing, and labor we perform within the United States.
Mark Smith
executiveSure, honestly, our whole focus has been on reducing the damage and getting back on track. Cummins isn’t seeing any kind of windfall here; making a profit off tariffs isn’t what we’re after. What we’re doing is working together throughout the supply chain to lessen the hit, and we’ve managed that pretty effectively. There is a small amount of fluctuation from one quarter to another and by segment, but overall we’re quite happy with how it nets out. It’s turned out better than I would have expected back around this same point last year, when the issue first really started to matter.
Tim Thein
analystThanks. Morning, everyone. Jen, I'd like to return to something you mentioned earlier regarding the B-Series engine's launch being pushed back. Would it be reasonable to think that Cummins could use credits, or some other mechanism, to lessen or perhaps fully offset any fines that might come up in that scenario?
Jennifer Rumsey
executiveLike I told you, we've stayed in close contact with EPA while they work through revising the regulation. We've made our plans clear to them. At this point, we're waiting for the final rule and its specifics so we can understand exactly what it means for us. Our expectation is that we can keep selling the existing B-Series product through 2027, with the new seven-liter arriving at the start of 2028. As for pricing and those kinds of details, we can't lock anything down until the rule is actually final.
Tim Thein
analystAll right, okay. Perhaps, you know, on the Cummins calls we once discussed China's role quite a bit, and, you know, regarding top-line expectations, there's a fairly significant shift versus what you previously anticipated for the full year's growth. I'm simply wondering about the profit dynamics underneath in China, since, as we all know, that economy has clearly experienced a rather extended deflationary stretch. I'm just curious, you know, how the underlying pull-through dynamics might look for Cummins in China now compared with, you know, prior years.
Jennifer Rumsey
executiveYeah. From a market standpoint, you know, what has shifted dramatically in China is the sharp rise in power generation needed to serve data centers. You know, you, like the rest of us, are seeing this, you know, heavy investment in data centers across the U.S. and China. With the offerings we provide, we hold a strong position in both of those markets and, you know, truly witnessed growth versus a year ago in China for that data center demand, plus Asia Pacific more broadly. You know, our team has positioned Cummins in the market exceptionally well, you know, with highly favorable business. Mark can say more about it.
Mark Smith
executiveFrom my perspective, what has benefited us is this: although growth on the top line in the conventional truck segment and in construction machinery hasn't climbed as vigorously as it did 5 to 10 years back, the factors working in our favor include a dedication to stricter emissions rules, which keeps adding content. Back when conversations about fresh emissions standards in China first began, I believe a degree of investor doubt existed regarding whether China would actually see those rules through. As it turns out, they did. That has kept generating sizable content additions. We've done very well at localizing content. That represents a major edge in what we do, and it's a major strength that comes from being such a substantial player in China. Beyond that, you're witnessing growing displacement, correct, in power generation requirements; that generally provides a lift. I believe that mix of elements, taken together with, naturally, our top-tier position and partnerships that have existed for a lengthy stretch of time, all of those are contributing. Indeed, China right now is certainly more of a tailwind than a headwind, and it appears the excitement around data centers there is quite strong, and we're positioned very well to gain from that or to assist customers with whatever they require. That has us excited.
Mark Smith
executiveAll right.
Rob Wertheimer
analystYeah. Thanks. My apologies. My question concerns electrification. Clearly, China has seen a surge, possibly for reasons of its own, and then I believe Tesla has booked a few orders for the semi. Could you maybe just discuss — and I think you mentioned this, Jennifer, briefly — could you discuss what the demand pull from your customers looks like in North America at present and what you expect the shape of that market to be over the coming 2 or 3 years?
Jennifer Rumsey
executiveYes. What I mean is, with the shift in greenhouse gas regulations, the demand pull in North America, apart from bus, has dropped to very low levels. Very low levels.
Rob Wertheimer
analystYes.
Jennifer Rumsey
executiveSo, you know, there's still a lot of interest in diesel, and we keep selling electric school buses. But honestly, demand for trucks is really quite low and, you know, isn't expected to get better anytime soon. That's the reason we're, you know, putting our attention on the worldwide opportunities that exist for us, staying prepared for this market, growing within the school bus segment we already have, and watching for signals indicating a change is coming.
Mark Smith
executiveYeah. If you look at the earnings calls we've had lately, you'll generally notice that our demand has been growing faster than the market. Demand — not our demand for the combustion engine products we already have — has been growing faster than the market. Things can change, but that's what we're seeing right now.
Tami Zakaria
analystHello, and good morning. Thanks a lot. I have two questions. To start, can you tell us what price realization came in at for the quarter?
Mark Smith
executiveSure. What I'd say is that on the whole, price cost came in slightly positive, though I wouldn't call it meaningful.
Tami Zakaria
analystGot it. All right, Mark, I was hoping you could give us a bit more detail. You mentioned that the second quarter would be strong, favorable when it comes to builds. Could you share some figures?
Mark Smith
executiveIt won't be strong.
Jennifer Rumsey
executiveDon't stop.
Mark Smith
executiveDon't stop. I was only getting my joke started. Yeah, carry on.
Tami Zakaria
analystOh, alright. My apologies — I missed that. Sorry about that. Regarding 2Q builds, your expectation is that things improve versus 1Q. On a sequential basis, should we think roughly 20% or 30% growth, then another increase in 3Q? Would 3Q basically represent the high point for B-Series and engine segment margins? Is that the right way to model it?
Mark Smith
executiveMy hope is that those margins continue rising well past Q3. True, Q4 typically isn't the best, given the holidays and the fact that you're moving into product transitions. It could stay strong all the way to the end — you're correct that we ought to see an improvement in Q2 and continued strength in Q3. The reason Q4 usually comes in somewhat softer is simply that OEMs have fewer production days owing to the holiday periods. Naturally, lots of variables feed into our EBITDA margins, and demand is certainly among the largest. We do anticipate that the remainder of the year will match or exceed Q1. Put as simply as possible, that's it.
Jennifer Rumsey
executiveRight, like you mentioned, the second quarter will see an increase for trucks, engines, and components, then another rise in the third quarter, and after that, as Mark noted, the typical end-of-year pattern in the fourth quarter.
Mark Smith
executiveCorrect. We have actually introduced another production shift for medium duty at our Rocky Mount, North Carolina facility in order to handle the additional demand that recently slid downward, and is now rising quickly once more. That has us enthusiastic. Handling those slumps provides the foundation for us to truly take advantage when things recover. On the whole, things are improving. Yes, it was a solid quarter.
Cole Couzens
analystHi, everyone. In 1 Q, the pricing we imply for engines fell both from a year ago and from the prior quarter. What is behind that? Given demand that is getting better and the visibility we have into higher engine prices next year, when do you expect we might begin to see engine pricing head upward during this year?
Mark Smith
executiveWell, several factors are at play, I'd say. On a per unit basis, for the most part, nothing has shifted in any meaningful way. What is actually happening is a mix effect tied to what gets sold during the quarter — whether that is on highway or off highway, North America or international. Parts show up in the revenue figures, though they are absent from the units' figures. Prices per unit have not dropped in any meaningful way. It is simply some variation between. For the 2027 emissions regulations in North America for the trucks, content is rising, and as we understand it, most of that will be tied to the powertrain, going forward, but it will be content-driven.
Cole Couzens
analystAll right. To build on that, regarding the EPA 2027 rule — if they end up bringing in penalties for non-compliance, could you verify this wouldn't hurt your standing competitively within the Class eight segment, since it appears every OEM currently has an engine meeting compliance requirements?
Jennifer Rumsey
executiveYeah. I won't engage in speculation about what action the EPA might take or how we would react. Like I mentioned, we've held numerous discussions aimed at ensuring that, while they go back over the rulemaking process, they grasp how our business operates and craft an equitable rule that is sensible for our customers.
Nick Arens
executiveAppreciate it. That brings today's call to a close. Many thanks for the ongoing interest you've shown in Cummins. We can't wait to pick the discussion back up at our Analyst Day on May 21st, when the leadership team will lay out how the business has gotten stronger and what comes next. Since we hit our 2030 profitability targets ahead of schedule, you should look for fresh details on our targets, capital deployment, and the growth opportunities in front of us, data centers among them; hope to see you all there. Thanks so much.
Operator
operatorEveryone, that wraps up what we had for today. At this point you're welcome to drop off the call or sign out of the webcast, and we hope the remainder of your day treats you well.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Cummins Inc. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.
Get the API View API docs →This call discussed
For developers and AI pipelines
Programmatic access to Cummins Inc. earnings transcripts and 132,000+ others is available through the
EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments,
full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.
More tools for stock research
OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Cummins Inc. or any ticker on your watchlist.
StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.