Snap-on Incorporated (SNA) Earnings Call Transcript & Summary
July 21, 2022
Earnings Call Speaker Segments
Sara Verbsky
executiveThanks, Mary, and good morning to all of you. We appreciate you being here today as we go through Snap-on's second quarter results, and you can find all the details in the press release we put out earlier this morning. Joining us on this call are Nick Pinchuk, Snap-on's Chief Executive Officer, and Aldo Pagliari, Snap-on's Chief Financial Officer. Nick is going to get us started this morning by sharing how he sees our performance. Then Aldo will walk through a more thorough look at our financial results. Once Nick offers a few final remarks, we'll open things up for your questions. As we always do, we've made slides available to go along with our discussion; you can pull those up through the Downloads tab in the webcast viewer, and they're also posted on our website, snapon.com, in the Investor section. Those slides, together with the transcript from today's call, will be kept on our website. Anything said on this call about management's expectations, estimates, or beliefs, or that otherwise addresses management's or the company's outlook, plans, or projections, counts as forward-looking statements, and actual results could end up differing materially from what's expressed in those statements. You can find any additional information, along with the factors that might cause our results to come out materially different from what the forward-looking statements suggest, in our SEC filings. And lastly, this presentation contains non-GAAP measures of financial performance, which shouldn't be viewed on their own or as a replacement for the comparable GAAP figures. You can find more details about these measures in the earnings release we issued today, which is available on our website; having said all that, I'd like to hand the call over to Nick Pinchuk now. Nick?
Nick Pinchuk
executiveAppreciate that, Sara. Morning, everyone. Same as always, I'll kick off this call by walking through what stood out in our second quarter. And as I go, I'll share how I see our results — which, once again, are encouraging — plus our market, which is robust, resilient and promising, and I'll discuss our progress; we feel we're stronger today than we've ever been, and I'll also get into what all of this means, and in our view it means we're better positioned for more — a lot more. After that, Aldo will take you through a more detailed look at the financials. Just keep up with the news and you're aware that right now we're living amid turmoil, inflation, variants, supply issues, a continuing unpredictable outbreak, precipitous lockdowns and a war in Ukraine, and through all of it Snap-on has demonstrated, leveraging our strengths in product and brand, and in people, advancing along our runways for growth, applying our Snap-on value creation, generating improvement, capitalizing on our resilient markets and extending our positive trajectory, breaking through the turbulence. What our second quarter amounts to is simply rising momentum. Quarter after quarter we've met the challenges and we're simply becoming even better at surmounting the difficulties, and looking ahead, we're confident our capabilities keep advancing, and here are the numbers showing why we should be confident. Reported sales for the quarter came to $1 billion, $136.6 million, higher than last year by $55.2 million, or 5.1%, which includes $32.4 million, or 330 basis points, of unfavorable foreign exchange. Organic sales growth reached 8.4%, with gains in every Group. And measured against pre-pandemic levels of 2019, our upward drive is clear as a bell — against 2019, sales for the quarter rose 19.5% as reported and 18.7% organically. That makes eight straight quarters now above pre-pandemic levels. We believe we're continuing an ongoing trend of accelerating expansion and are building momentum with emphasis, increasing higher and higher, showing that we're only getting stronger every day. Opco operating income was $246.6 million, up $29.5 million, and the operating margin came in at 21.7%, up 160 basis points from last year and 170 basis points from 2019. At financial services, operating income was $65.3 million, versus the $68.9 million of last year, and that result, combined with Opco, produced a consolidated operating margin of 25.5%, up 100 basis points from last year and 130 from 2019. And EPS was $4.27, up 13.6% from last year and 32.6% above the comparable pre-pandemic level recorded in 2019, up $3.22. I've been saying this since the third quarter of 2020, and I'll say it again, we believe Snap-on is stronger now than when we entered this great withering, and the second quarter numbers say it so. Now let's talk about the markets. Auto repair remains positive. Most, if not all, of our main metrics look pretty good. Money going toward vehicle upkeep, as well as toward fixing and servicing vehicles, is rising. Technician headcount is climbing. Pay for mechanics is climbing. Techs feel good about what lies ahead and about the growing demand for their skills as fresh technologies and fresh layers of complexity spread throughout the car park, and we saw that confirmed in what is broadly believed, for a number of quarters now, which is that the count of automotive repair technicians keeps growing quarter after quarter, higher today than at any point in the past 30 years. And when I talk with shop owners or managers, which I do often, it's obvious there's a need for more, many more, and at Snap-on we're delighted by that. Vehicle repair is a robust and durable market, something our franchisees also reinforce. It shows up in our figures. It comes through in how they speak. We think they're doing better than they ever have. Along with franchisees and technicians, there are vehicle repair shop owners and managers — that's the RS&I space. Appetite for new and used cars is strong, yet availability is tight, a familiar tale. COVID-19 hit the auto supply chain, certainly. Still, that's beside the point. Whether there are plenty of new cars or few new vehicles, the car park is big, ageing, growing more complex, and repair demand stays strong, returning to high water, and shops recognize this plainly and are beginning to put money in to satisfy the present need and prepare for what's coming. The range of drivetrains keeps widening — internal combustion, hybrid, plug-in electric, full electric — and each day brings more driver assistance and more vehicle automation, adding to vehicle complexity. Shops today require more new and upgraded equipment, and they lean increasingly on service and repair information to steer them through the universe of new requirements and procedures; honestly, it's all music to our ears. Snap-on builds excellent tools and equipment, and it's plainly repair and information headquarters. RS&I has capitalized on that trend, building new equipment offerings and advanced database solutions; we now hold a robust lineup of products in those essential areas. Mitchell 1 repair information software and shop management software, SPX, electronic parts catalog, our dealer shop management technologies, electric vehicle health check solutions, and our heavy-duty and fast track intelligent diagnostics hardware. These are large databases, growing more capable and simpler to operate, helping the shop get it right the first time and efficiently. The repair shop is evolving, climbing in complexity, and ours — and I has the products to match it. Last, let's discuss critical industries. At Snap-on, we say Snap-on rolls out of the garage solving tasks of consequence, and we do. So this is our C&I segment — the part of our business that's most global — and that's where we're still seeing the biggest ongoing effects from the pandemic, along with things like inflation and disruption in the supply chain, especially for kids. In that area, customers have taken longer to adjust, the headwinds haven't let up, and our offerings with lots of SKUs are getting hit hard by supply chain issues. I think most people are aware of the two-month lockdown in Shanghai — that region is a major C&I business hub and also a crucial transportation link for our factory in China, so the lockdown created problems. And apart from that specific situation, C&I faces particular difficulties because of how far it reaches geographically, having to adapt to differing effects and protocols and economic turbulence from one country to the next, with each nation seeing different virus impacts and rules and economic instability; still, I'd say that looking at the quarter, the C&I team stepped up, and during the quarter, we picked up gains in North America, Europe and Asia, even with those challenges. So I'd characterize our C&I markets as offering ongoing opportunity, and when you add automotive repair to that, we think our markets overall are strong at the moment and that there's a lot more opportunity coming as we continue along our growth runways.
Nick Pinchuk
executiveAnd I could wrap up this part about strong momentum and plenty of opportunities without mentioning yet again the force behind our sophisticated Snap-on value creation—especially when it comes to linking with customers and innovating, creating new products and solutions that come from what we observe right there in the workplace, insights that generate excellent new offerings while also helping steer the growth of our franchisee selling capacity through improved processes, more effective training, and stronger communication. All of that contributed to our momentum, getting past the challenges, adapting to the virus, seizing market opportunities fully, beginning an ongoing upward trajectory going forward, and we intend to sustain it. So that's the big picture; now let's turn to the segments. For the C&I Group, sales for the quarter were up 2.5% on a reported basis, which equals 8.6 million compared with 2021. Within that, there was an organic gain of $25.3 million, or 7.6%, driven by growth across all of our divisions. On the earnings side, C&I income reached 51.7%, which was down $3.8 million from 2021. Unfavorable foreign currency accounted for $2 million of that decline, while the rest reflects the impact of supply chain disruption on multi-SKU C&I products. The OI margin was 14.4%, 140 basis points below 2021, but it still showed improvement and was a 100 basis point sequential increase from the previous quarter. If you compare results to the equivalent 2019 stretches before the pandemic, organic revenue was up 7.4%, while the operating income margin came in at 14.4%, a decline of 20 basis points; however, that number reflected an 80-basis-point drag from acquisitions as well as adverse foreign exchange. Turning to C&I, one area that kept standing out during this quarter—just as it did last quarter—was SNA Europe, which posted growth once more, rising by a double-digit percentage versus a year earlier and sitting well ahead of where it stood before the pandemic; those gains came even as the business was winning in Europe, led by creative offerings such as our Bahco Erle tool management system, which customizes products around what each customer requires. Because Europe is such a varied marketplace, SNA Europe keeps benefiting more and more from aligning its products with particular jobs. We also saw SNA Europe get a boost in C&I from some really helpful gains in recovering parts of critical industries, including aerospace, plus general industry, and from Asia-Pacific nations such as India, Japan, and South Korea. Together, those gains outweighed the drop and the lagging rebound in sectors like the military and natural resources. Our confidence and dedication to growing in critical industries have not wavered, and a strong slate of new products backs that up. On the product side, in the prior quarter, we added the new Snap-on CT761 3/8-inch Impact Wrench to our 14.4 Volt MicroLithium power tool lineup to help handle essential jobs in both critical industries and automotive repair; it's a very appealing tool, yet it's also highly practical. Built with a small footprint so it can get into cramped areas, a housing made from nylon for toughness, and a unique toggle switch trigger for accuracy. This latest version also comes with a tray that doubles as a headlight, casting broad light over the entire work area, and that feature makes tricky multi-point jobs much easier when there isn't much light — which is common in a shop or when fixing things on location. Imagine that. This Impact Wrench also delivers a powerful 225 foot pounds of breakaway torque, controlled by a variable speed drive. That means whoever operates it can dial in precisely the needed torque for whatever job is at hand, while the 14 volt battery paired with 2.5 amp hours guarantees steady output plus longer run time, translating into a far more productive workday. Shipping for the CT361 started early within the quarter, landed exactly on target, swiftly turned into a million hit product, and sold out in what felt like a blink of an eye. Fantastic product. So that covers C&I — a quarter full of promise, with volume climbing nicely, beginning to get past the turbulence, and heading down its runways for growth. Moving on to the Tools Group now. We saw sales of $520.6 million. That's up $36.5 million, and it factors in $7.7 million of unfavorable currency plus organic gains of 9.3%. Operating margin was 23.9%, which is 250 basis points better than what we saw pre-virus in 2019, when sales grew $114.8 million, including a 28% — 28.1% organic gain. This quarter's 23.9% operating margin came in 630 basis points above those pre-virus numbers — so we've clearly come out of the pandemic in a stronger position. Another good quarter for the Tools Group, with growth across every product line and beyond, and we're seeing more evidence of lasting strength. Other metrics we track every quarter, like franchisee health indicators, continue to look quite good and are clearly moving in a positive direction. Our van network, in our view, remains quite strong, and that's not just about the data. Just a few weeks ago, I spent time with roughly two dozen franchisees who serve as representatives for the regions on our national franchisee advisory councils in the U.S. and Canada, and they struck me as motivated and flourishing — enthusiastic about how things are going right now, optimistic regarding where their fellow vans and the different areas they speak for are headed, and very hopeful about what's still to come. They believe in their opportunities and are confident about the future. The Tools Group performed very well, both in terms of numbers and in ways that are harder to measure, and that positive feeling wasn't just something we had internally. Outside observers backed it up again during this quarter. For another year, Snap-on appeared on Entrepreneur Magazine's list of the 50 leading franchise businesses. And within that same list, we once again came in first in the Tools Distribution segment — a spot we've occupied for a long time — and this sort of acknowledgment reflects the core, present-day strength of our franchise owners as well as our entire mobile van network. This is a powerful operation, and that kind of traction would have been impossible without a steady flow of brand-new, distinctive products. And one factor that contributed to pushing our hand tools higher once more in this period, again during this period, was the Long Nose Slip Joint Pliers we recently introduced; this is a unique implement featuring our patented 3-Position joint that is precision machined to allow effortless switching and control, enabling the pliers to maintain parallel jaws, which boosts contact with the workpiece, and it has an indicated — the joint has been relocated, plus an optimized handle shape and distinctive Talon Grip-serrated jaws. Thanks to all those features, our new pliers deliver more than 50% additional pulling power. The teeth on these pliers go through a hardening and machining process, which makes them sharp while still being tough. You get three different gripping patterns to work with — coarse serrations down near the base, then finer grooves toward the tip — so they handle a wide range of jobs really well. You can also work with different parts of the jaw. We build these right in Milwaukee, and the steel we use is a special cold forged allied grade, which delivers improved strength and durability. The pliers launched at the beginning of last quarter, and the response has been overwhelmingly favorable. When I talked with our NFAC franchisees, they described them as flying off the truck, and that matches what we're seeing. Within one quarter, sales have already made this a hit product strategy. Our fresh lineup is genuinely making an impact in the Tools Group, and it's obvious in the figures: eight consecutive quarters exceeding pre-pandemic levels.
Nick Pinchuk
executiveThe Tools Group is continuing to advance and climb, showing striking momentum, and whether you examine the figures or invest any time alongside the team, you come away convinced that everything is firing on all cylinders, and that's the reality. Turning now to RS&I, revenue rose 4.6%, which equates to $18.2 million, compared with a year ago, and that figure includes $27.4 million, or 7%, of organic improvement, alongside double-digit gains in undercar equipment, with diagnostics and information also pushing higher, while dealership activity stayed level when viewed through an earnings lens. RS&I operating income came in at $95.7 million, which marks an increase of $9 million, or 10.4%, and the operating margin reached 23%, a gain of 120 basis points over the prior year. Measured against 2019, sales climbed 19.5% as reported, and organic growth totaled $58 million, or 16.8%, with robust gains in undercar equipment along with diagnostics and information products. On the profitability side, the OI margin of 23% fell 240 basis points relative to 2019, largely capturing a 110 point hit stemming purely from acquisitions plus the margin dilution caused by the greater undercar equipment sales we've been witnessing; we hold the view that RS&I has excellent opportunities, and we're strengthening its path ahead with new products such as our Hofmann 609 aligner, built specifically for independent or general repair shops, where alignment isn't presently a main focus and the space available is limited. This new offering lets those all-purpose garages retain the low volume alignment business in-house, thanks to its compact footprint and portability kit, which makes storage simple when it isn't being used and allows efficient deployment whenever alignment is genuinely required. It frees up considerable space, yet the job still gets done. Featuring our newest 3D system authoring OEM approved accuracy, the 609 makes it possible for those general repair shops to handle even the most complex alignment systems. It delivers a high return on the investment, doesn't take up room needed for other repairs — frequently needed for other repairs — and it strengthens the garage's reputation for technical capability. It's an excellent value for general repair shops, and they're taking notice. Our equipment business has been performing exceptionally, with strong double-digit equipment growth across double-digit quarters for quite a while, and the Hofmann 609 aligner plays a major role in that mix. RS&I, cementing its standing with repair shop owners and managers, growth in undercar equipment and diagnostics and information projects, products, and a range of innovative new products and product lines pointing the way forward. So those are the quarter's highlights, Tools Group, solid progress across the board, undeniable strength. C&I, posting a positive result despite variation across industries and geographies, and RS&I, growing profitable volume with repair shop owners and managers. Snap-on overall sales climbed notably, both versus the prior year, up 8.4% organically, and up 18.7% organically against pre-pandemic levels, sustaining an evidently positive trajectory. Opco operating margin stands strong at 21.7%, rising once more this quarter, rising once more this quarter, up 160 basis points. EPS $4.27, higher than last year, higher than last quarter, and higher than pre-pandemic levels. We had a promising quarter, and at this point I'll pass things along to Aldo. Aldo?
Aldo Pagliari
executiveNick, I appreciate that. We lay out our consolidated operating results on slide six. In the quarter, net sales reached $1,136.6 million, which was up 5.1% versus 2021 levels. That reflects an organic sales gain of 8.4%, partly offset by $32.4 million in unfavorable foreign currency translation. This quarter's organic sales gain reflects high single-digit growth in each of the company's segments, and it compares to an 8% year-over-year organic increase recorded last quarter. Consolidated gross margin came in at 48.7%, unchanged from last quarter, but it declined 150 basis points from 50.2% last year. Higher material and other costs were partly offset by contributions from the increased sales volumes and pricing actions, as well as by benefits from the company's RCI initiatives and 30 basis points of favorable foreign currency effects. Once again this quarter, we believe the corporation, through pricing and RCI actions, continues to navigate effectively the costs and other supply chain dynamics of the current environment. Operating expenses as a percentage of net sales were 27%, improving 310 basis points from 30.1% last year. That improvement is primarily due to higher sales volumes, savings from RCI initiatives and lower cost associated with stock-based expenses, operating earnings from financial services of $246.6 million in the quarter, compared to $217.1 million in 2021. As a percentage of net sales, operating margin before financial services was 21.7%, improving 160 basis points from last year and up 140 basis points sequentially. Financial services revenue was $86.4 million in the second quarter of 2022, compared to $86.9 million last year. Operating earnings were $65.3 million, a decrease of $3.6 million from 2021 levels, primarily as a result of higher provisions for credit losses and those recorded last year. Consolidated operating earnings were $311.9 million, compared to $286 million last year. As a percentage of revenues, the operating earnings margin was 25.5%, improving 100 basis points from 24.5% in 2021. Our second quarter effective income tax rate was 23.8%, compared to 23.3% last year. Net earnings were $231.5 million, or $4.27 per diluted share, an increase of $23.5 million, or $0.51 per share, from last year's levels, representing a 13.6% increase in diluted earnings per share. Now, let's turn to our segment results, starting with the C&I Group on slide seven. Sales were $359.1 million, up from $350.5 million last year, reflecting a $25.3 million, or 7.6%, organic sales gain, partly offset by $16.7 million of unfavorable foreign currency translations. The organic growth primarily reflects double-digit gains in the segment's European based hand tools business and Asia-Pacific operations, as well as a mid single-digit increase in sales to customers in critical industries. Within critical industries, solid gains in general industry and international aviation more than offset lower sales to the military. Gross margin was 37.3%, and although it improved sequentially, it declined 220 basis points from 39.5% in the second quarter of 2021. This is primarily due to higher material and other input costs being partly offset by the benefits from higher sales volumes and pricing actions and savings from the segment's RCI initiatives. During the quarter, operating expenses came in at 22.9% of sales, which was an 80 basis point improvement over the 23.7% recorded in 2021, largely driven by the impact of increased sales volumes. For the C&I segment, we posted operating earnings of $51.7 million, down from $55.5 million the prior year. Operating margin landed at 14.4%, versus 15.8% twelve months earlier. Moving to slide eight now, the Snap-on Tools Group saw sales reach $520.6 million, a 7.5% rise from $484.1 million in 2021, which reflected a 9.3% organic sales gain that was partly offset by $7.7 million in negative foreign currency translations. That organic sales growth was made up of a double-digit improvement in our U.S. business along with a low single-digit uptick in our international operations. Here in the U.S., sales climbed across every product line and featured especially strong full-storage sales during the quarter. Gross margin came in at 46% for the quarter, up against 45.5% in this year's first quarter, but that was an 80 basis point drop from 46.8% a year ago. The decline versus last year stems mainly from elevated material and other costs, plus 10 basis points of adverse foreign currency impacts, partly offset by gains from higher sales volumes and pricing actions. Operating expenses represented 22.1% of sales, a 330 basis point improvement from 25.4% the prior year, which reflected the benefits of higher sales volumes and savings from RCI initiatives, and also included the impact of reduced expenses tied to the company's franchisees stock purchase program. The Snap-on Tools Group delivered operating earnings of $124.4 million, compared with $103.5 million a year earlier. Operating margin was 23.9%, a 250 basis point improvement from 21.4% twelve months ago. Now looking at the RS&I Group on slide nine, sales totaled $416.8 million versus $398.6 million a year ago, reflecting a 7% organic sales gain that was partly offset by $9.2 million of negative foreign currency translation. That organic gain consisted of a double-digit increase in undercar equipment sales and a low single-digit gain in sales of diagnostics and repair information products to independent shop owners and managers. Activity with OEM dealerships was essentially flat. Gross margin of 43.2% fell 150 basis points from 44.7% last year. The main reasons were higher material and other input costs as well as increased sales in lower gross margin businesses. Those declines were partly offset by gains from pricing actions and savings from RCI initiatives, along with 50 basis points of positive foreign currency effects. Operating expenses at 20.2% of sales improved 270 basis points from 22.9% a year ago, mainly because of benefits from sales volume leverage, including higher activity and lower expense businesses, plus savings from RCI initiatives. The RS&I Group generated operating earnings of $95.7 million, compared with $86.7 million last year. Operating margin was 23%, a 120 basis point improvement from the 21.8% reported a year ago. Now moving to slide 10, financial services revenue was $86.4 million, which included $800,000 of unfavorable currency translation, compared with $86.9 million last year. Earnings from financial services came in at $65.3 million, versus $68.9 million during 2021. Expenses for financial services reached $21.1 million, which is $3.1 million higher than 2021 levels, largely driven by $2.4 million of greater provisions for credit losses. Although provisions rose relative to the historically lower provision rate seen last year, trends in the loan portfolio have stayed stable. When measured against the average portfolio, financial services expenses came to 1% and 0.8% during the second quarter of 2022 and 2021, respectively; across both those second quarters, the average yield on finance and contract receivables stood at 17.5% and 8.5%, respectively. Loan originations totaled $307.6 million in the second quarter, up $21.8 million, or 7.6%, from 2021 levels, driven by an 11% rise in finance receivables originations, partly offset by fewer contract receivables originations. Turning to slide 11, our balance sheet at quarter end holds roughly $2.2 billion of gross financing receivables, of which $1.9 billion comes from U.S. operations. The 60-day plus delinquency rate for U.S. extended credit sits at 1.4%, matching the comparable pre-pandemic period of 2019 and reflecting the seasonal improvement we normally see in the second quarter.
Aldo Pagliari
executiveWhen you look at extended credit, or finance receivables, our net losses for the trailing 12 months came to $40.4 million. That worked out to 2.33% of outstandings at quarter end, a modest decline from the 2.34% we reported at the close of last quarter. Moving on to slide 12, cash provided by operating activities during the quarter was $140.8 million, versus $238.2 million a year ago. What drove the drop in the second quarter of 2021 was mainly an $87.7 million rise in working investment. That change in working investment dollars stems largely from stronger demand, which includes growth in receivables along with larger inventory levels this year. Beyond demand-based needs, the inventory build also mirrors bigger in-transit inventory amounts, plus added buffer stocks tied to supply chain dynamics in today's macro environment. Net cash used by investing activities was $73.8 million, and that figure included net additions to finance receivables of $53.5 million along with capital expenditures of $21.3 million. Net cash used by financing activities came to $112.2 million, which included cash dividends of $75.7 million and the repurchase of $251,000 shares of common stock for $53.8 million under our existing share repurchase program. At quarter end, we still had availability to buy back as much as an additional $420.8 million of common stock under existing authorizations. Now to slide 13: trade and other accounts receivable rose $46.8 million from 2021 year end. Days sales outstanding stood at 60 days, versus 58 days at 2021 year end. Inventories were up $89.5 million from 2021 year end, and on a trailing 12-month basis, inventory turns were 2.7 compared to 2.8 at year end 2021. Our cash position at quarter end was $812.9 million, compared to $780 million at year end 2021. Net debt to capital ratio was 8.3% versus 9.1% at year end 2021. Along with cash and expected cash flow from operations, we have over $800 million available under our credit facilities, and as of quarter end, no amounts were outstanding under the credit facility, and no commercial paper borrowings were outstanding. That wraps up my comments on our second quarter performance. Let me now briefly go over a few outlook items for 2022. We expect capital expenditures to fall in the range of $90 million to $100 million; beyond that, we currently expect, assuming no changes to U.S. tax legislation, that our full year 2022 effective income tax rate will land in the range of 23% to 24%. I'll now hand the call back to Nick for his closing thoughts. Nick?
Nick Pinchuk
executiveAppreciate it, Aldo. So that wraps up our second quarter. We're seeing markets that are resilient and growing stronger each day; these are fascinating times with the pandemic, inflation, supply chain disruptions, a war, and sudden lockdowns, yet Snap-on delivers significant advantage to this turbulence through product, brand, and people; this has allowed our team to push through the turbulence, maintaining a positive trajectory and you can observe it in the results. C&I is back on a growth track, posting a 7.6% organic gain, even though it was our most affected business. RS&I, showing gains with repair shop owners and managers, powered by hardware and its growing information portfolio, with sales rising 7% organically and NOI margin at 22%, an increase of 120 basis points compared to last year; and the Tools Group, with phenomenal results, sales climbing 9.3% organically against last year and up 28.1% against 2019, marking eight consecutive quarters above pre-pandemic levels and an NOI margin of 23.9%; and everything converged for total Snap-on organic growth of 8.4%, NOI margin of 21.7%, and an EPS of $4.27, all record highs despite the turbulence. It was a promising quarter and we come out of that stretch with building momentum. These are turbulent times, but Snap-on is propelled by appealing markets, by distinctive strengths, and by a seasoned and skilled team that has delivered clear and steady results and has grown stronger and stronger quarter after quarter in handling the challenges of the moment. And we trust these built-in advantages will keep winning as we move ahead on a clear upward path for the rest of this year and far into the future. Before I hand the call over to the Operator, I want to address our franchisees and associates directly. I'm aware they're listening in. The corporation is a place where individuals join forces to create a benefit for themselves and others that they couldn't change on their own. You've accomplished exactly that once more this quarter. For your achievement in that effort you have my congratulations. For the vitality and the expertise you contribute to our work, you have my respect and for the dedication you consistently show to our team, you have my gratitude; now I'll hand the call over to the operator. Operator?
Scott Stember
analystMorning, and nice work on those really impressive numbers.
Nick Pinchuk
executiveAppreciate it, Scott.
Scott Stember
analystCould we discuss Tools? You said that all categories had gains, and it sounded as though Tool storage delivered another really robust quarter. Did that tie to the new mobile cart, and could you perhaps help size how large tools storage was during the quarter and attempt to determine...
Nick Pinchuk
executiveLook, I don’t like providing — I don’t, I believe, it’s — you begin fretting far too much about our quarter-to-quarter, Scott, Scott you go hikidi, bikidi, boo <<inaudible>> around here about, since things shift based on which models you bring up. Still, I will say Tool storage led the way, it reached double digits, a fine quarter and it came — and targets played a role, what occurred this time is, we began getting more of the larger boxes out, the EPIQ and the Master Series; we had some excellent new offerings. Our Supernova Masters Series featuring the electric blue and the copper trim, that appeared quite popular; so it was a terrific quarter. Carts kept being robust, yet EPIQ, the larger boxes, the standard tool storage box, which we might call Roll Cabs or not, made the difference. So it was a rather good quarter. The Tools Group truly, I mean, I think, it experienced a wonderful quarter. Incidentally, did I note that the Tools Group NOI margin was 23.9% in the quarter? I think, I have noted that; that was — I think that captures everything. I will tell you. And incidentally, during the quarter hand tools were already — were also higher and also — that’s a positive element for us, up strongly. But the major effect in the quarter...
Scott Stember
analystAnd then…
Nick Pinchuk
executiveYeah.
Scott Stember
analystPlease, go on. My apologies.
Nick Pinchuk
executiveYou first. You first.
Scott Stember
analystI wanted to inquire about sales to the van and off the van — what does inventory look like on the van at present?
Nick Pinchuk
executiveSure. Well, stock levels have risen, and our people are asking for additional stock, since when they head out into the field, their inventory turns sit well under where they were before the pandemic. So turns are actually greater now rather than under pre-pandemic levels — they're over pre-pandemic levels. Thus they're considerably greater at present; and sell-through this quarter outperformed the prior quarter. Taking the broad view, it appears to align with our total sales. So we figure things are progressing well. My belief is our folks would like additional inventory. My belief is they want more. And in our business, I'd note, we've improved somewhat at getting product out, yet we still have, we still carry a fairly solid backlog. Customers continue to urgently seek out what we make.
Scott Stember
analystUnderstood. Then finally, regarding RS&I, you mentioned undercar performing very strongly. Does that tie to the collision side of things, or is it simply everywhere?
Nick Pinchuk
executiveYes. It is everywhere, although collision has really stood out in this environment; Car-O-Liner was brought into the fold several years back, and our expectation was that collision, as neural networks were deployed involving sensors and various driver assist systems, would turn collision into a highly profitable space, and that appears to have unfolded. So collision ranks within the leading 4 undercar categories, yet on the whole everything is moving along nicely. Independent repair shops feel upbeat; they are witnessing — as I noted during my call — greater investment, higher spending, more technicians, increased wages, and they can observe all of it flowing through. Their level of optimism about the current climate is extremely high. That drives them toward putting more money in. That is what shows up in undercar equipment.
Scott Stember
analystUnderstood. I appreciate you fielding these.
Nick Pinchuk
executiveOf course. Thank you.
Luke Junk
analystMorning, and thanks for taking my questions. The first thing I'd like to ask about is originations — they're positive this quarter, up nicely both year over year and really strong on a sequential basis after some fits and starts lately. Could you give us a peek under the hood as far as what's driving that? Do you view it as sustainable, and did the system breach last quarter have any impact at all on the numbers this quarter?
Nick Pinchuk
executiveI don't think last quarter had any impact on this quarter. The impact was felt mainly in the most recent quarter — it may have influenced originations somewhat. Sales during that period leaned toward the later weeks, since the breach occurred near the quarter's start, and you could see that pattern play out. As I mentioned previously, we believed we'd had fairly strong sales on certain big ticket items, though those hadn't necessarily finished moving through the vans yet, and that likely came to fruition in this quarter. Still, Luke, I'd say the product is the main catalyst — the technicians' optimism plus the product itself. When I consider what really pushes originations higher, it comes down to customers reacting with genuine enthusiasm to the EPIQ boxes they've received, and those units being more readily in stock. Our delivery execution keeps improving. Earlier, throughout the pandemic period, we ran into a number of stops and restarts, which meant we were moving additional carts, and at this point we've got a greater supply of the standard roll cabs. So in my view, that combination is what produced the stronger originations during this stretch. RA continues to look quite healthy, and franchisee-provided financing struck us as quite dependable. It did not decline over the quarter, so it held up well. Hand tools, as I mentioned, posted gains. So overall, the picture is largely one of products fueling the results. Looking at the Tools Group, it's really carrying a lot of momentum. Going back to where things stood before the pandemic, they were up 9%, and then—what was it—Q4 2020 came in at 15%, followed by 17%, then 21%, then 22%, then 24%, and 28% in the quarter we just reported. And on top of that, they finished the quarter strong and left it even stronger than they entered. They're really rolling now. Momentum is building, so I'm feeling quite good about it, and you can see that showing up in some of the broader product lines within Tool Storage. As I mentioned during our previous call, that isn't to say cart figures declined at all—they remained robust during the period. It's simply that the amount of low cash grew larger.
Luke Junk
analystThat's really useful. Thanks, Nick. For my second question, staying within RS&I, I want to ask about undercar equipment once more. Going all the way back to the beginning of 2021, it's been a source of steady strength in that business — by our count, 6 consecutive quarters of double-digit growth overall. Where do you see us sitting in the investment cycle there, given that this growth has been a drag on RS&I gross margins, and looking ahead to whenever that begins to normalize? Once it does, how fast would you expect improved software margins to start showing up?
Nick Pinchuk
executiveWell, look, I think better software margins — you're going to see them. One thing you're seeing in our — remember what we said, we're pivoting away from titles, where we sold updates, we call them titles, but really they're software updates every 6 months, and we're pivoting toward a subscription business. So that tends to stretch your revenue out somewhat — it has an effect on revenues in the quarter. And so, but our subscriptions are up deep, our subscribers are up deep double digits this quarter versus a year ago. So that appears to be working for us. So we're pretty excited about what's possible there, but you know, you've got some, I guess I'd call them recognition questions as you move through this period; so you don't quite see it coming through, but I can see it coming through down the road. And as I said, with the range of electronic products we have around software, from diagnostic software to Mitchell 1 software, to Dealer-FX to electronic parts catalogs to vehicle checks. We believe we're the repair information headquarters, and it's going to get bigger, and we're going to see it roll through that business sooner. Now, if you're asking me to expect the equipment business to attenuate, I hope not. I'm not hoping for that, just because it's low margin — it doesn't seem, it doesn't mean I don't want the profits, I do. So, and I could see that go, that was down — you might recall, it was down, it was pretty much flat on its back for a couple of quarters, 2 or 3 quarters earlier, and it's bouncing back from that. We've seen a lot in independent repair shops, and I would figure after the dealerships start getting used to the situation, I think they'll be discombobulated by the low supply and what they're doing associated with this sort of a little bit — a little more reluctant in the situation. When they come online, I think that will be even greater.
Luke Junk
analystAnd then, if I might just slip in one additional question, perhaps this one is…
Nick Pinchuk
executiveSure.
Luke Junk
analyst…be a smart thing for Aldo to take on? Can you take us back over the way higher interest rates hit the credit business — on the funding side, if that matters at all, and on what you charge — and specifically, I keep wondering whether there's some misperception out there that you'd like to clear up regarding an environment of rising interest rates? Thanks.
Aldo Pagliari
executiveAppreciate that, Luke. In truth, the effect is minor; if anything, a more favorable environment could come out of it. And what makes me say so? Once more, our funding is long. So, looking at Snap-On's balance sheet, day-to-day funding isn't how we operate. As a result, no immediate impact on our borrowing capability can be foreseen from rising interest rates, since, as you can observe, the balance sheet holds plenty of cash and nothing is due to mature for quite some time. So, when it comes to the cost of our funds going into that business, we are stable. For over a decade, really, our stated rates have stayed pretty consistent. So, the lowest rate out there is not what they are, but compared with what might be available to people on a credit card format and things of that nature, they are lower. So, for the credit profile of the customers we serve, we think our rates are appropriate, and we think that those types of customers recognize that. So, should they decide to engage in any type of lending activity, we are the kind of lender of choice. And I think that stability we provide gives a little bit of a form of reassurance, so as interest rates go up, competitors' rates — if they were ever considering them — and by competitors, I mean things like credit cards. So, for people in the subprime category, as interest rates are going to be going up. So, pretty stable is what we are going to be, and pretty consistent is what our approach is going to be. Yeah, I think competitors' rates might be going up, which, you could argue, maybe creates a slightly more favorable environment.
Luke Junk
analystAll right, that's all from me. Thanks for the detailed commentary earlier today.
Bret Jordan
analystHello there. Good morning, everyone.
Nick Pinchuk
executiveMorning to you.
Bret Jordan
analystRegarding that organic growth figure — clearly we're operating in a fairly inflationary climate — might you break down how much came from units compared with how much came from price? And then, I suppose, as a second question — actually, let me put that first one out there, and then I've got another one to ask.
Nick Pinchuk
executiveSure. Sure. Go ahead with the second one.
Bret Jordan
analystFor the follow-up, I believe you mentioned inflation in certain cost of goods within C&I and RS&I. Could you discuss where you're observing it — is it metals, labor — where exactly are you seeing inflation, what can be done to pass that along, and what's the timing?
Nick Pinchuk
executiveAnd incidentally, Bret, before the Tools Group will execute — the Tools Group folks will execute if I step away from this conference call, without mentioning that inflationary impacts also hit them and prices are rising. So it's not only RS&I and C&I. They too must contend with that, and I have to give them credit for it. But here's the issue: it's tough for us to pin down, since we do have some pricing, though it's not most of it. When we look at our factories, we know certain products are in demand. Things are rolling off there, and our people are buried in demand. So we know that's a good sign. Another thing is it's hard, because, you know, we have list prices. But list prices don't — they vary quite a bit depending on the product, and when they come out on an average, you might say you're raising sales 3.5% or something like that, but products. Beyond that, we've got numerous fresh instruments being introduced constantly—actually, we're deploying dozens of million-dollar tools each quarter throughout the entire network. Additionally, weekly promotions come into play, and depending on whether they're generous or modest, they can have a substantial impact. Because of all this, giving you a precise figure is difficult. What I can tell you is that price hikes account for a smaller portion of our gains, while the bulk comes from higher volumes. That's how we see things playing out given the conditions we're operating in. Of course, this differs across different Groups and so forth. When you ask about the area where the effect is largest, Bret, the biggest pressure from inflation for us comes from purchasing in the spot market, since we've committed to delivering as much as we possibly can. There's demand out there. We want to fulfill it. We aren't able to meet every bit of that demand, so we're out there acquiring things such as chips through spot purchases. And I could go on — those prices swing enormously; for power tools and other items, we source components via the spot market, and those costs can shift dramatically. On the commodities side, we purchase a wide range of steel grades. For tool storage and for things like lifts, both hot rolled and cold rolled are softening a bit — conditions are improving slightly, and prices are declining. As for the steel that goes into hand tools, it has topped out, and although there has been some moderation, those prices have not yet settled back to normal. The steel going into hand tools — what we refer to as rod steel — has essentially hit its ceiling and gone flat, yet for us it hasn't let up so far, and we aren't seeing much easing on freight either, with those sorts of things working their way through. My expectation is that this will change, since I think once the turbulent COVID period — the micro viscosity period — ceases occurring, you'll begin to observe these things drifting lower, because supply interruptions will no longer be there, which means it becomes more consistent, and as a result prices will decline. That said, I lack a crystal ball regarding it; that's roughly how we see the situation.
Bret Jordan
analystAll right. When you consider the inflation on your prices—your sticker prices—so far this year, I suppose, what would you say? Is it increasing by mid-to-low, or by mid-single digits?
Nick Pinchuk
executiveThat's a tough one for me to answer, since it keeps shifting. It varies widely based on your location. Within the Tools Group, there's a list price, while in other areas, you set prices individually for each product, and that hinges on how big the product is and numerous other factors. So what I'm really saying is this: if you took a step back and examined our pricing, it accounts for a smaller portion of our growth.
Bret Jordan
analystAll right, that's excellent. I appreciate it.
Nick Pinchuk
executiveWith any luck, Bret, we'll capture some share and move some units as a result. Sounds good.
Christopher Glynn
analystHey. Thanks. Good morning.
Nick Pinchuk
executiveHi, Chris.
Christopher Glynn
analystSo, Nick, some — hey. There were fairly upbeat remarks regarding momentum and tenure throughout the Tools Group. I wanted to dig into that a bit, specifically how much comes from market penetration and overall movement into technicians who haven't traditionally been served, versus something like a revenue-per-technician equation.
Nick Pinchuk
executiveYeah; getting a handle on all of that is tough for us, since you typically begin with folks at lower levels; but technicians are being added by us. I can't break that down for you. That's certainly what we're targeting and it has worked, but we're also selling more to technicians already on board, given that their wages are rising and they're feeling more optimistic. And beyond that, this isn't a case where activity levels stay static. What I can say is that the count of technicians on our books is climbing, and that figure includes some newcomers. So that's really all I can offer you there. At least both of those factors are at play, I believe, because of the...
Christopher Glynn
analystAlright.
Nick Pinchuk
executiveAnd that logic holds up. Let me just tack on something here, since it does make sense — we see it as a real positive for us to bring in fresh technicians, and that's one piece of the growth story I've been talking about for ages now. At the same time, in this kind of setting it's obvious that the technicians already on the job, whether they're new or have been around a while, will require new products; and in fact they'll require a wider selection of those products as you see more and different powertrains, as you see more of these automated features showing up in the system. So we expect both of those effects to be profitable drivers going forward, and it would be a mistake to view either one as perhaps — to view them as anything other than two solid paths to growth.
Christopher Glynn
analystThat's clear. Yeah. My intent was really to focus specifically on the growth of the technical...
Nick Pinchuk
executiveOf course.
Christopher Glynn
analystThat's excellent. So regarding C&I, obviously a much better quarter both year-over-year and sequentially compared to the sorts of patterns we've witnessed across the last several quarters, somewhat more stable and consistent. So I'm curious whether your feeling is that things are gaining momentum there, or whether you simply managed to ship a bit more product out the door during this quarter?
Nick Pinchuk
executiveNo. I don't — well, we'd like to believe we shipped a bit more out the door. But I don't believe that's the reason. I think, look, I think we're achieving a modest amount of penetration. As I attempted to express in our remarks, we're becoming more adept at dealing with the turbulence. I'd like to say we aren't as foolish as we appear, and plenty of folks would tell you that couldn't possibly be true; but we're sort of learning each quarter, and C&I has the lengthiest learning curve, since they experience the greatest impact from everything that's occurred. I mean, C&I in Shanghai, there's that particular issue — incidentally, we were up in Asia within C&I, so they performed rather well on that front; so what we're observing is, we're observing our capacity to handle the turbulence more effectively; we're also observing some warming, like during this quarter, something that left us quite encouraged was that the military wasn't down as much this quarter. The military is sort of recovering. It's still down. You know what I mean, I'm still — I don't like it, but it's still — it's recovering. So it wasn't as large of a hole this quarter, as it has been previously; and additionally general industry, I don't know whether you caught that comment, general industry was up and aviation in total was up, especially international aviation believe it or not. So, general industry which implies the broadest category for us, in terms of that, that has so many distinct segments and that was up strongly; so I sort of think the critical industries are arriving, getting stronger, recovering from the impact; so we feel pretty good about that; in our business are looking better. Now, that's why we were particularly pleased about this 7.6% growth organically in C&I; that made us — that gave us great encouragement. And in reality, the 14.4%, yeah, it was down 140 basis points year-over-year, but 14.4% aren't chop liver for C&I, it's not so bad; and was up 100 basis points versus last quarter and down 2020 versus 2019 against the pretty severe impact of acquisitions and currency, I think, it was 80 basis points. So those — they are points were pretty good for us, we were encouraged by it.
Christopher Glynn
analystGreat. Thanks for the color.
Nick Pinchuk
executiveSure.
Gary Prestopino
analystHey. Good morning, everyone.
Nick Pinchuk
executiveGary, how are you?
Gary Prestopino
analystOh! Everything's good here. Thanks. Hey, Nick, I've got a question — as things change with all those hybrids and EVs that have been showing up in the car park, or at least a few of them, for years at this point. Given what you offer, are technicians right now asking for particular hand tools, or is it more diagnostic and calibration equipment for fixing those types of vehicles?
Nick Pinchuk
executiveMy sense is you're seeing greater demand on the diagnostic side, though hand tools show up too. My sense is, if you consider the — they're in the car park, but they're — if you consider — looking at it is a different thing from looking at sales. If you consider them sitting in the car park, it turns out to be fairly thin. You're not seeing — not a lot of garages are seeing many of them. So the folks are talking with us about this, and we sell hand tools plus we sell certain diagnostics that you have — it isn't a dedicated diagnostic format, but it's a diagnostic that would carry the capabilities to handle those items. So you're not seeing — they remain fairly thinly spread out unless perhaps you're in Southern California or somewhere like that, or possibly New York City, or in some spots, you might see a few of those garages, but we aren't seeing enormous demand. Mostly we're preparing ourselves for what we believe the demand will be down the road. Our view is this will be a tidal wave; and so that's among the reasons we acquired Dealer-FX, to get a look at these things.
Gary Prestopino
analystOkay. Thank you.
Nick Pinchuk
executiveSure.
Ivan Feinseth
analystHello, and thanks for fielding my inquiries. Nice work on yet another strong quarter and those impressive outcomes.
Nick Pinchuk
executiveAppreciate it, Ivan.
Ivan Feinseth
analystYou mentioned launching a new tool that ran out of stock quite fast — how quickly are you able to increase production? Is that because the demand caught you off guard, or are you still coping with supply constraints, and how soon could you get another manufacturing run going?
Nick Pinchuk
executiveI'd say we didn't think it would be that large. This particular one — the pair — naturally, since this is an earnings call, I select a few of the standout items, as you're aware, and I feature them. The point is those items flew off the shelves, and we hadn't expected them to perform that well, or else we'd have started with a larger run. That's where things stand. The demand was simply very strong. Beyond that, I'll add that we think additional capacity is needed, since demand exists, so we're examining that carefully, and we'll need to return and attempt to arrange another run across the handful of plants, which is already overbooked, yet we'll try to fit it in and release some additional units. Clearly, though, if you do that, I mean, the reason we operate hand tool plants is that they have plenty of demand. So we find ourselves with further opportunities provided we can simply get more product out, and we're pursuing that. Regarding plant expansion, we have a plan to expand our Milwaukee hand tool plants, where this product was manufactured.
Ivan Feinseth
analystThen, when your franchisees are dealing with OEM mechanics, what sort of feedback or conversations are happening regarding getting ready to scale up for new equipment to service the EVs that will eventually...
Nick Pinchuk
executiveYeah. Look, I believe those discussions are taking place, but typically what you're referring to is insulated tools, a few of the clear items such as diagnostic equipment, insulated tools, battery lift tables, that type of thing. And after that, Ivan, what's going to occur is mechanics still don't yet know what they don't know, if you follow me, when it comes to getting the tool ready.
Ivan Feinseth
analystYeah.
Nick Pinchuk
executiveOnce those new vehicles arrive at dealerships, the technicians are going to figure out the spots where specialized equipment is required to handle them. That represents an entirely separate category of assortment. So at this moment we're discussing the typical items that someone could — what you pick up on during the initial period from the — what you're told by the OEMs, or you notice in those extremely, extremely — those really initial days inside the OEM service bays, and those items are exactly what I mentioned a moment ago, such as insulated tools plus certain diagnostic and analysis routines, along with some lift tables and additional items related to EVs, and afterward you'll begin hearing once technicians start fixing them, suppose, wow, these specific models are not the same, a specialized tool is needed by me for this task, and that is the point where our efforts begin getting introduced and we begin developing additional tools to fit. That's an entirely separate assortment, and that's among the things that truly takes off for us.
Ivan Feinseth
analystSo then my guess is you'll require some sort of fresh lift varieties to deal with the access or the battery swapping, given the way it is…
Nick Pinchuk
executiveThat's also correct — absolutely correct…
Ivan Feinseth
analystYeah, it…
Nick Pinchuk
executiveThat's also correct. I didn't bring that up, but you're right…
Ivan Feinseth
analystAnd that applies equally…
Nick Pinchuk
executiveThat’s — the reason I brought up is taken care of by a different division. Yet that holds true as well. Much of this is going to — the equipment — that entire equipment line which isn’t routed through the vans represents a completely separate matter that will require new gear, since these items are heavy, as you’re aware, being an expert on cars.
Ivan Feinseth
analystAll right. So I suppose the same situation will apply to undercarriage and collision work, since the way electric vehicles are built, and the way repairs have to be done around the battery and eventually the entire structure, is going to create an enormous upgrade cycle for undercarriage and collision, isn't that so?
Nick Pinchuk
executiveThat's right. That's right. You've got it; exactly. What I mean is the batteries are, before I go on — most folks, I believe, fail to appreciate just how heavy these batteries really are. Beneath that chassis there is a great deal of weight; so this will be a problem; I believe it will transform the garage as things unfold. And once more, I'd like to make the point that the OEMs will work this out soon, but afterward a great many unexpected complications will arise that alter it once more following your initial wave of change. So we are quite excited. That's the reason I say we are moving into the golden age of car repair.
Ivan Feinseth
analystYeah. That's really thrilling. Congrats once more, and here's to continued success ahead.
Nick Pinchuk
executiveAll right. Appreciate it.
Sara Verbsky
executiveWe appreciate everyone being with us on this call. Shortly, a recording of today's session will be accessible at snapon.com. As we always do, we thank you for your interest in Snap-on. Have a good day.
Operator
operatorThis concludes today’s call. Thank you for your participation. You may now disconnect.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Snap-on Incorporated transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.
Get the API View API docs →This call discussed
For developers and AI pipelines
Programmatic access to Snap-on Incorporated earnings transcripts and 132,000+ others is available through the
EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments,
full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.
More tools for stock research
OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Snap-on Incorporated or any ticker on your watchlist.
StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.