Snap-on Incorporated (SNA) Earnings Call Transcript & Summary

April 20, 2023

New York Stock Exchange US Industrials Machinery earnings 69 min

Earnings Call Speaker Segments

Sara Verbsky

executive
#1

Thanks, Keith, and good morning to all of you. We appreciate you being with us today as we go through Snap-on's results for the first quarter, which are laid out in the press release we put out earlier this morning; joining us on the call are Nick Pinchuk, Snap-on's Chief Executive Officer, and Aldo Pagliari, Snap-on's Chief Financial Officer. Nick is going to open things up this morning by sharing how he sees our performance. After that, Aldo will walk through a more in-depth review of our financial results. Once Nick offers a few closing remarks, we'll open the line for your questions. As we always do, we've made slides available to go along with our discussion. You can find those slides under the Downloads tab in the webcast viewer, and also on our website, snapon.com, in the Investors section; those slides are going to be archived on our website together with a transcript of today's call. Anything said on this call about management's expectations, estimates or beliefs, or that otherwise addresses management's or the company's outlook, plans or projections, constitutes forward-looking statements, and actual results could differ materially from what's expressed in those statements. More information, along with the factors that might cause our results to differ materially from what the forward-looking statements suggest, appears in our SEC filings. Lastly, this presentation contains non-GAAP measures of financial performance, and those shouldn't be viewed on their own or as a replacement for the comparable GAAP figures. Further details about these measures can be found in our earnings release issued today, which is available on our website. Having said all that, I'd like to hand the call over to Nick Pinchuk. Nick?

Nick Pinchuk

executive
#2

Thank you, Sara. And like always — hello, everyone. Good morning. Same as we typically do, I'll kick things off by walking through what stood out in Q1, and I'll share how I see it all fitting together. After that, Aldo is going to take you through the financials in detail. As we go, we'll talk about the markets. The strong ones — absolutely booming; we'll also share how our momentum looks; it has remained uninterrupted and full of energy. Again, what defines this quarter for us is sustained toughness. Our capacity to steer through complicated conditions while understanding that turning a page on the calendar — turning the calendar page will deliver fresh obstacles. You could grab any major outlet or tune into or view any business program and you're going to run into all sorts of worries, ways of measuring hardship and shrinkage. What we understand is that we can hold up against the tough times. That's what we've done across the last 3 months and across quarter following quarter. You see, we hold substantial strengths. Our markets, showing toughness that comes from being critical, our brand, standing tall by providing quality and strengthening personal pride, our products. They plainly push the world ahead by making what's critical simpler; and lastly, our people, our team, seasoned, skilled and sure of themselves. This quarter gives us reason for optimism, and here's why. Sales we reported for the period came to $1.183 billion, higher than a year ago by $85.2 million or 7.8%, which includes $24 million or 240 basis points of negative foreign exchange. Organic sales rose 10.2%, with gains in each group, marking our 11th straight quarter of operating expansion versus the prior year. Opco operating income for the quarter reached $259.8 million, which includes $7.6 million of negative foreign currency, and grew 16.5%. The operating margin came in at 22%, up 170 basis points against a year ago. Over in financial services, operating income was $66.3 million versus $70.4 million a year ago. And that is in line with opco — and that, when combined with opco, produced a consolidated operating margin of 25.6%, an improvement of 80 basis points. Q1 EPS was $4.60, higher by $0.60 or 15% compared with last year's $4. So we feel our confidence and our continued optimism are plainly warranted by these figures. Now let's dig deeper into our markets. The automotive repair setting is still running hot. Demand exists across every discipline. We keep putting money into new products and handling the repair difficulties of newer models, keeping up with rising complexity. As platforms shift, the modification calls for new tools to get the job done, and we're staying right with it, whether that's an internal combustion engine or an electric vehicles, the techs need a hand and we're prepared to provide it. The updates produce a variety of difficulties, fresh difficulties, ranging from accessibility problems tied to combined spaces that demand new designs with differing geometries. The shrinking pool of engineering talent driving the need for precision torque instrument through to the growing count of fasteners and listing our power tools so parts can be removed and installed efficiently through to the growth of drive by wire, more electronics. When you pack in more electronic components, you need more handheld diagnostic gear and specialized software capable of talking to and overseeing that web of computers and sensors. OEM dealerships are showing particular momentum for us. Every time fresh models roll into showrooms, they bring a whole new set of must-have instruments, equipment, and diagnostic solutions to handle what makes each one distinct. Over on the independent side, repair shops are thriving. If you've brought your car in lately, you've seen it yourself — every bay is occupied and the lots are packed tight. Our franchisees tell me they're excited, describing demand as strong. The figures make that plain. For every kind of shop, appointments are being booked farther ahead. Owners recognize the expansion. They understand technicians are essential. Naturally, technician headcount is climbing sharply and pay is rising too — all of which sounds wonderful to us. With these fresh models arriving, automation advancing, precision mattering more, and vehicles growing ever more intricate, we could be at the dawn of a golden era for vehicle repair, and our results suggest exactly that. So people fix things — a fantastic space for our Tools Group along with our Repair Systems and Information Group, RS&I, to do business in. And we think it keeps improving. Now let me turn to critical industries, where commercial and industrial, or C&I, carries Snap-on beyond the garage, tackling consequential jobs and representing our biggest international footprint. This is the segment where — I'd say — we face the most exposure to worldwide headwinds, yet the picture remains fairly positive. Critical industries continued gaining across sectors — aviation, education, heavy-duty fleets, general industry, and natural resources all moved higher. The military, which had been down, is now bouncing back on strong demand. On geography, North America performed well. Europe came in improved, despite the continuing — the continuing conflict in Ukraine and the revenue upheaval from Brexit, while Asia Pacific stayed mixed, with variation throughout that landscape. Still, taken together, the C&I critical industry markets delivered meaningful and widespread gains in every sector. That arena saw considerable progress during the first quarter, and additional opportunities lie ahead. We think there's plentiful, sustained potential along every one of our growth runways — strengthening the van network, growing alongside repair shop owners and managers, broadening the critical industry, and constructing in emerging markets, capitalizing on our broad product lineup, reinforcing our brand, and applying a deeper grasp of the jobs at hand, linking up with the customer, standing in person at the worksite where tasks get done, watching the work happen, and converting that knowledge into innovative new products, with more coming down the road for professionals. We magnify that effort through a healthy dose of rapid continuous improvement, RCI for short, which pushes our productivity and margins higher. That, then, is how we see the market. Moving on to the segments now. Within C&I, revenue reached $363.8 million, which includes a $12.5 million headwind from foreign currency, and that was a 7% climb versus a year ago. Organic revenue rose 11.1%, driven by double-digit improvement in critical industries and specialty torque, with precision leading the charge. C&I generated operating income of $55.8 million, which absorbed $2 million of unfavorable foreign exchange, marking a 22.1% gain compared with the prior year, while operating margin came in at 15.3%, 190 basis points higher than the 2022 figure — encouraging results, wouldn't you say? C&I delivered meaningful expansion even with persistent uncertainty spanning multiple regions. A element that had been holding C&I back lately involved the consequences of supply disruptions. The customize — you caught me saying this while on the move — the customized kits containing numerous distinct items are exposed to availability interruptions. And a contributor to C&I's improvement came from supply chain enhancements. Throughout the quarter, we began clearing the bottlenecks and lessening those effects. The first quarter demonstrates that advancement. We've long stated that demand within critical initiatives has remained robust. That carried into the first quarter. And this strength stems from inventive products built expressly to make a difference along critical paths.

Nick Pinchuk

executive
#3

Take our brand-new ATech 1/4-inch Drive Flex-Head TechAngle Micro Torque Wrench — quite a mouthful, yet an excellent tool. It targets aircraft repair squarely, where the requirement for exact torque keeps climbing. Demand for power keeps growing, and fixing things in cramped spaces happens more often. On all 3 of those fronts, our latest unit delivers. This new wrench measures just under 1 foot in length, yet its diameter comes in below an inch. It's built to reach far into engine compartments, and a 15-degree Flex-Head design lets it dodge obstructions. Plus it relies on our rugged 72-tooth gear mechanism, so the tool can work with tiny rotations whenever barriers limit movement — that makes it a tough wrench. The fresh ATech brings power, considerable power, hitting 300-inch. It widens the range by 20% and grows the count of applications the tool can handle. Tasks once split across several devices now merge into a single handy unit, with no changeover time — that delivers a pleasant productivity gain. There are 4 alert modes on this unit: LCD, LED, vibratory and audible. Renting it — those 4 stop over torquing. Even where visibility is poor and space is tight; and paired with the unit's accuracy of plus or minus 2%, the feature works to keep fastening exactly on spec. The ATech's accessibility, power and accuracy safeguard the whole aviation sector — it's yet another hit product that helped push C&I higher this quarter. So that's C&I: rising, bigger sales, better profits, strong products and more ahead; now over to the Tools Group. Sales came to $537.0 million, an increase of $24.9 million, which includes $7.1 million of unfavorable foreign currency, posting a 6.3% organic gain, with high single-digit growth in the U.S. and a low single-digit improvement in the international network, while the operating margin reached 24.5%, rising 180 basis points against 80 basis points of unfavorable currency. Boomshakalaka! That was a fantastic figure for us. This leaves us genuinely optimistic and encouraged. Vehicle repair markets remain strong and resilient, and they follow a continuing path full of opportunity. And once more, the tools numbers confirm it; yet past the quantitative proof, I was recently with some of our driver — our van drivers last week. Their outlook was positive without condition. That's the sole word I can apply with no equivocation or without question: they report shops are busy. Every product — all our product lines see high demand, and their technician customers overflow with confidence. It appears that everyone in vehicle repair, from top to bottom, holds great expectations for what lies ahead. And that positivity shows in the sustained enthusiasm for big tickets, longer payback items, diagnostics and tool storage boxes; they remain major contributors to our results. You can spot it in the success of the top of the line ZEUS+handheld diagnostic units. You'll see evidence of it in how people are responding to the newest member of our EPIQ tool storage family. That's the limited edition 68-inch EPIQ box — the toolbox we've named the Neon Stinger. It has stirred up a lot of buzz thanks to its striking appearance: a gloss black body paired with the freshest shade in tool storage trim. Beyond that — and I mean this thing really pops, even when the light isn't great, like in a corner of a shop, a tool store, or a repair shop — it stands out anywhere and gives the techs an opportunity to say something about themselves. And the glow isn't the whole story. It delivers plenty of serious capability too. There's the speed drawer, which allows for customizable organization. There's a power drawer offering securable charging space, plus an LED power top that runs the full length of the box, completely lighting up the drawers and the tools so they gleam like the jewels they truly are. The Stinger also comes with 15 power outlets and 6 USB ports, all of it meant to guarantee that the tech's cordless tools, lights, and accessories stay charged and ready whenever needed. I'll tell you, demand ran high, and the Stinger became a Snap-on million-dollar hit product almost instantly. So within the Tools Group, demand stayed robust across every product segment, and that momentum kept rolling right through the quarter. Now let's turn to RS&I. Sales came in at $446.6 million, an increase of $48.4 million, or 12.2%, which includes $6 million from unfavorable foreign currency. Organic activity climbed 13.9%, with double-digit gains in undercar equipment, and the OEM business is what's leading the charge. Those are 2 major contributors. RS&I operating earnings hit $104.6 million, up 14.2% versus last year, while the operating margin landed at 23.4%, a gain of 40 basis points. Once again this quarter, software products and subscriptions proved a meaningful positive. On that note, our Mitchell 1 division, which supplies repair information software to independent shops, keeps thriving, building customer connection and pursuing innovation by delivering excellent new enhancements to shop efficiency. As an example, at this year's gathering of the heavy-duty technology and maintenance council in Orlando, Mitchell 1 rolled out our powerful wiring navigation features built specifically for trucks. Large truck professionals saw right away that this new software would let technicians handle the difficulties of electrical issues far more easily and speedily on ever more complicated vehicles, whether they run on internal combustion or battery cells. This feature truly makes a difference. It's a major help to the truck repair world, allowing a quick shift from one wiring diagram to the next by following the wire without interruption between views; it's a substantial time saver for techs throughout the industry, and shops are taking notice. Mitchell 1 has also just launched another excellent product: an automated work package function for its collision repair software. This new system pulls together onto a single screen all the pertinent information required for collision jobs, overhaul procedures, illustrations, and diagrams. Everything comes up with just a click — a single press of a button. Collision repair poses a challenge because the work involves many different facets: you require details on parts, procedures for repairs, diagrams of systems, yet typically that material sits in distinct locations, filed under differing categories, inside the vehicle's documentation. What our new system does is merge that data into one work package, which walks the technician step by step through an effective repair. That may sound quite simple; however, in reality, this consolidated, comprehensive information removes the 20 to 90 minutes normally required to produce a repair and effective guide for a collision repair task; we think this new software will contribute substantially to Mitchell 1 growth; it's an obvious saving in an area that keeps rising in modern vehicle repair; as vehicle automation increases and sensor networks grow alongside it, <<inaudible>> repairs matter more and more, and our new feature is perfectly aimed to smooth the path. We continue expanding in RS&I. We continue strengthening RS&I's standing with repair shop owners and managers, providing an ever-growing range of solutions for everyday challenges, welding customer connection and innovation, to essential components of Snap-on value creation, processes to drive winning new software and hardware. We're confident. It's a formula that works, and RS&I results reinforce that view.

Nick Pinchuk

executive
#4

Alright, that covers the main points from this quarter. We keep building on our momentum. This marks the 11th consecutive quarter where our operating results have grown compared to the same period a year earlier. Our C&I segment is performing well, making gains despite the supply disruptions currently affecting the market. RS&I remains strong, with growth driven by both software and hardware. The Tools Group has a solid, improved van network and is targeting further gains. Organic sales for the quarter rose 10.2%. Opco operating margin came in at 22%, and EPS was $4.60, which is a 15% increase versus last year — a meaningful jump. All of this together provides clear proof and strong evidence that Snap-on has come out of the severe toll taken by COVID in better shape than before it hit, and the company continues that upward trajectory with skill and determination; it was a quarter that gave us encouragement. At this point, I'll hand the call over to Aldo.

Aldo Pagliari

executive
#5

Thanks for that, Nick. On slide 6, you'll find a summary of how we performed on a consolidated basis. Net sales for the quarter reached $1.183 billion, representing a 7.8% increase over 2022. That growth was fueled by a 10.2% improvement in organic sales, though it was partially offset by $24 million — or 240 basis points — in negative impacts from foreign currency translation. The organic sales gain this quarter was driven by widespread improvement across every segment. Looking at it by region, North America delivered double-digit year-over-year organic growth, while Europe posted low single-digit organic gains. Our consolidated gross margin was 49.8%, which is 110 basis points higher than the 48.7% recorded a year earlier. Higher sales volumes, pricing measures, and gains from the company's RCI efforts outweighed increased material and other expenses, plus a 20 basis point hit from unfavorable foreign currency. While supply chain conditions have gotten somewhat better, we feel the corporation kept managing costs and other difficulties tied to the ongoing situation effectively. Operating expenses came to 27.8% of net sales, a 60 basis point increase from 28.4% the prior year. Operating earnings before financial services hit $259.8 million this quarter, compared with $223.1 million in 2022. As a share of net sales, operating margin before financial services stood at 22%, which is 170 basis points above last year's first quarter. In Q1 2023, Financial Services brought in $92.6 million in revenue, up 5.6% compared with $87.7 million during the same period last year. Operating earnings came to $66.3 million, a drop of $4.1 million relative to 2022, and that figure reflects provisions for credit losses returning to what we consider a more typical level than what was recorded a year earlier. For the quarter, consolidated operating earnings reached $326.1 million, compared with $293.5 million in the prior-year period. Measured against revenues, the operating earnings margin stood at 25.6%, an 80 basis point gain over last year. Our effective income tax rate for the first quarter was 23.1%, compared with 23.7% a year ago. Our net earnings came in at $248.7 million, which works out to $4.60 per diluted share. That figure includes a $0.12 unfavorable impact tied to foreign currency. Compared with 2022 levels, this is an increase of $31.3 million, or $0.60 per share, marking a 15% rise in diluted earnings per share. Now, moving on to how our segments performed this quarter. Let's begin with C&I, which you'll find on Slide 7. Sales reached $363.8 million, an improvement over the $340.1 million recorded a year earlier. This reflects an organic sales gain of $36.2 million, or 11.1%, though that was partially offset by $12.5 million in unfavorable foreign currency translation. The organic growth is mainly driven by double-digit increases in sales to customers within critical industries and in the segment's specialty torque business, along with a low single-digit uptick in the segment's European-based hand tools business. On the critical industries side, we saw sales increases across a broad range of areas this quarter. Beyond stronger business with general industry, we posted solid numbers for military customers, and the same goes for technical education, aviation, and natural resources. Our gross margin came in at 38.8%, which is a 240 basis point gain over the 36.4% we recorded in Q1 of 2022. What's behind that? Mostly it's the fact that we shipped a larger volume of units, plus critical industries delivered a higher gross margin, and we got help from price adjustments and benefits flowing from our RCI initiatives. Those positives were partly offset by elevated material prices and other expense pressures. In the quarter, operating expenses came in at 23.5% of sales, which is a 50 basis point rise from the 23% posted in 2022, largely tied to greater sales and businesses carrying heavier expenses. For the C&I segment, operating earnings reached $55.8 million, a 22.1% jump from the $45.7 million recorded a year earlier. Operating margin landed at 15.3%, which is 190 basis points better than the 13.4% seen last year. Moving on to Slide 8 now. The Snap-on Tools Group posted sales of $537 million, up against $512.1 million the prior year, which works out to a 6.3% organic sales increase, though $7.1 million of adverse foreign currency translation chipped away at that. That organic growth came from a high single-digit improvement in our U.S. business plus a low single-digit rise in our international operations. Every product line saw sales climb year-over-year during the quarter. Gross margin hit 47.3% for the quarter, up 180 basis points from 45.5% a year ago; the main reasons are stronger unit volumes, pricing moves, reduced material and other costs, and gains from RCI efforts, with 80 basis points of negative currency impact providing a partial offset. Operating expenses at 22.8% of sales matched last year's figure. Snap-on Tools Group operating earnings were $131.7 million, which includes $6.1 million of adverse foreign currency effects, up $15.7 million versus last year, and operating margin came in at 24.5%, which includes 80 basis points of negative currency impact, marking a 180 basis point improvement over the 22.7% from 2022. Now over to the RS&I Group on Slide 9. Sales hit $446.6 million, a 12.2% increase over the $398.2 million from 2022, driven by a 13.9% organic sales gain, partly offset by $6 million of adverse foreign currency translation. Looking at the components of that organic increase, sales of undercar and collision repair equipment climbed by double digits, as did our activity with OEM dealerships. We also recorded a mid-single-digit rise in revenue from diagnostics and repair information products sold to independent shop owners and managers. Gross margin came in at 43.5%, which is 110 basis points lower than the 44.6% posted a year ago. The main drivers of that decline were a greater mix of lower gross margin businesses along with higher materials costs and other expenses. Partially countering those pressures were benefits from our pricing actions, savings tied to our C&I initiatives, and 30 basis points of favorable foreign currency effects. Our operating expenses landed at 20.1% of sales, an improvement of 150 basis points over the 21.6% we saw a year ago. That gain came primarily from leverage on sales volume, a greater mix of lower-expense businesses, and cost savings tied to RCI initiatives. For the RS&I Group, operating earnings reached $104.6 million, up against $91.6 million in the prior year. Operating margin stood at 23.4%, compared with 23% reported last year. Turning now to Slide 10. Revenue in financial services climbed to $92.6 million from $87.7 million the year before, with the growth mostly attributable to an expanded loan portfolio. Our Financial Services segment delivered operating earnings of $66.3 million — a figure that reflects $700,000 in adverse currency effects — compared with $70.4 million for 2022. Expenses in financial services came to $26.3 million, which is $9 million above where they stood in 2022, and that includes $8.1 million more in provisions for credit losses. This year-over-year rise in provision mirrors both expansion of the portfolio and a shift back toward what we view as a more typical pre-pandemic level of provisioning. To put that in context, finance receivable loss provisions for the quarter totaled $14.2 million, against $6.3 million in last year's first quarter. Back in the first quarters of 2019 and 2018, loss provisions came in at $12.5 million and $15.8 million, respectively. Beyond that, our total finance receivable portfolio, which includes extended credit worldwide, has grown 7.5% compared to the same period last year, and at this time we're observing that both delinquency and portfolio performance patterns remain stable. When looking at the average portfolio as a benchmark, financial services expenses accounted for 1.1% in Q1 2023 versus 0.8% during the prior year's same quarter; the average yield on finance receivables was 17.7% in the first quarter of 2023 and 17.6% in the first quarter of 2022; and the average yield on contract receivables came to 8.7% in Q1 2023 and 8.5% in Q1 2022.

Aldo Pagliari

executive
#6

First-quarter loan originations came to $300.9 million, which was up $55.3 million, or 22.5%, versus 2022. That reflects a 25.1% rise in finance receivables originations and a 9.2% rise in contract receivables originations. The gain in finance receivable origination shows the strong demand that kept up during the quarter for big ticket products our franchisees sell. Let's go to Slide 11. At quarter end, our balance sheet has roughly $2.3 billion of gross financing receivables, and $2 billion of that comes from our U.S. operation. For U.S. extended credit, the 60-day plus delinquency rate was 1.5%, against 1.6% in 2022. Sequentially, that rate fell 10 basis points, which reflects the seasonal pattern we normally see from the fourth quarter into the first. When it comes to extended credit, or finance receivables, trailing 12-month net losses were $45.1 million, equal to 2.46% of outstandings at the close of the first quarter. That is 12 basis points above a year ago, but 45 basis points below where we ended 2019. Let's move to Slide 12. Cash provided by operating activities was $301.6 million this quarter, versus $193.9 million a year earlier. The gain over the first quarter of 2022 mainly comes from smaller year-over-year increases in working investment, better net earnings, and reduced cash tax and compensation payments. Net cash used by investing activities was $72.9 million, and that included net additions to finance receivables of $49.6 million plus capital expenditures of $23 million. Net cash used by financing activities was $152.1 million, and that included cash dividends of $86.1 million and the repurchase of 356,000 shares of common stock for $87.2 million under our existing share repurchase programs. At quarter end, we still had availability to buy back as much as another $345.4 million of common stock under existing authorizations. Let's turn to Slide 13. Trade and other accounts receivable rose $20.7 million from 2022 year-end. Days sales outstanding came in at 62 days, versus 61 days at 2022 year-end. Inventories grew $16 million from 2022 year-end. On a trailing 12-month basis, inventory turns were 2.4%, against 2.5% at year-end 2022. The inventory growth mainly shows higher demand, including inventories needed to support new products and critical industry projects. Also, to better assure availability given what is happening in the current supply chain, our safety stocks and in-transit parts components and raw materials are higher, as are our year-over-year costs tied to finished goods. Our cash position at quarter end was $833.8 million, versus $757.2 million at year-end 2022. Our net debt to capital ratio was 7.4%, versus 9% at year-end 2022. Beyond cash and expected cash flow from operations, we have more than $800 million available under our credit facilities. And at quarter end, no amounts are outstanding under the credit facility, and no commercial paper borrowings are outstanding. That wraps up my remarks on our first quarter performance. I'll now quickly go over a few outlook items for 2023. We expect capital expenditures to be approximately $100 million. Beyond that, for the entire year 2023, our effective income tax rate is presently expected to fall between 23% and 24%. At this point I'll hand the call over to Nick so he can share his closing remarks. Nick?

Nick Pinchuk

executive
#7

Thank you, Aldo, for walking us through the finances in such detail. So, well, that wraps up Snap-on's first quarter. It's a performance that gives us encouragement, and it shows plainly how broad, how deep, and how long our remarkable run of progress has been. On the breadth side: gains in every one of the operating groups. C&I, moving ahead despite the challenge of customized kits and supply turbulence, and rising above the hurdles of geographic reach in difficult times. Tools Group, keeping up its upward trend, making the most of the strong and resilient vehicle repair market, and hitting yet another margin record. RS&I posted another quarter of strong growth, driven by increasing vehicle complexity and new model introductions. All areas of our business performed well during the period. Our quarter also had depth. It was a strong record across the board, throughout the entire P&L. C&I delivered 11.1% organic growth with a 15.3% OI margin, which was up 190 basis points. At RS&I, organic sales increased 13.9%, and the OI margin was a robust 23.4%, 40 points higher than a year ago. Organic activity at the Tools Group climbed 6.3%, with stronger results in the U.S. at high single digits; and we noted the standout appeal of the Stinger toolbox. I have to say, it genuinely stands out — and another thing that stands out is the Tools OI margin. That's a number people notice. It stands out like a neon sign: 24.5%, an increase of 180 basis points, even with 80 basis points of unfavorable foreign currency working against it. Taken together, all of that produced strength throughout the corporation. Organic sales grew 10.2%, a big gain, despite the uncertainty. OI margin came in at 22% — 22%, which is a rise of 170 basis points; and when you total everything up, EPS was $4.60, clearly ahead of any comparison. And last, what defines our performance is its duration, the extended positive trend. This marked the 11th consecutive quarter of year-over-year operating gain. Things are unfolding in the way we expected. As model updates and emerging technologies speed up, there's a need for additional tools and programs. It appears the auto repair industry may be entering a prosperous era, with more techs on the job, pay levels climbing, and a sense of hope shared by both groups and individuals throughout the field. We aimed for our forward drive to carry into the quarter, and the franchise owners' feedback backed up that upbeat outlook. Looking ahead, we expect that forward drive to keep going. And we have faith — we have faith that our position lets us capitalize on the many chances available, expanding and getting better; we've achieved this time and again, and we pulled it off once more during the first quarter. So look, our product carries real device benefits. Customer relationships and innovation shaped it, and it clears obstacles on the critical path, delivering a noticeable edge for professionals. Our brand gives us an edge too — it signals seriousness and professionalism, and it instills pride and dignity in a way no other name can. Then there's our people, our team — that's another edge. We've faced challenges and we're fully dedicated, and from where we sit, the resilience of the market plus these considerable strengths mean Snap-on can maintain its momentum and keep rising through the second quarter of 2023 and well beyond. And now, before I turn it over to the operator, it feels right for me to say a few words to our franchisees and associates — our team. I'm aware plenty of you are tuned in. This quarter brings encouragement, yet for anyone wondering why or how, our gaze goes solely to all of you. For the sizable role you had in this result, you have my congratulations; for the remarkable dedication you've shown our team, you have my admiration; and for the steadfast faith you place in Snap-on's future, you have my thanks. Now I'll pass the call to the operator. Operator?

Christopher Glynn

analyst
#8

Nick, I was interested in how C&I seems to be posting stronger organic gains. You mentioned that supply chain pressure has eased somewhat. So I'd like to know whether past due backlog is starting to shrink, and what point you're at in that process? Also, does total backlog keep expanding, since the breadth sounds like it's getting fairly robust?

Nick Pinchuk

executive
#9

Our backlog remains quite solid. Take that 11.1% figure, the gain — incidentally, within the critical industries it was actually larger than that. So that didn't come from backlog. Essentially, the backlog is still sitting there; what you're witnessing is that some of the repair difficulties are now being worked through. I won't claim total triumph over supply turbulence, yet this quarter looks considerably improved versus earlier ones. On top of that, military business is returning during this stretch. Military had been lower previously; so those 2 elements are pushing critical industries higher, and that's quite positive; and it isn't — a fairly hefty backlog is still in place. Orders continue coming in. Snap-on customized products are liked by everyone.

Christopher Glynn

analyst
#10

All right. Also, in the press release, you said the story continues, the Snap-on value creation process, and you brought up substantial room to get better. Might you go into a few of the details that support that claim?

Nick Pinchuk

executive
#11

Sure. When it comes to disposing of the vans, we could be far more effective. That's among the reasons that, as we move through our business, moving higher within the Tools Group on the main elements that push it higher, we could outperform that. Our plants could operate more effectively since they are packed to the rafters, they are in up to their eyes; we are attempting to grow them; so we are engaged in that expansion, and we are hammering the RCI into those expansions. So we had better — that is going to assist us fairly significantly. So that's visible. And I believe in many respects, RCI pertains to the Tools business, I mean to the Product business, since the complexity in repair rises. It requires new products, and possessing a big quantity of new products truly demands a genuine emphasis on RCI and the real customer connection and innovation process. And so we will push that through. So at the core, we perceive many opportunities. Our business is kind of like that, Chris. We in a structural sense have opportunities since we have 85,000 SKUs; we are fairly vertically integrated in many places, at times, in certain instances, raw steel enters the back of the factory and goes through a number of different processes from forging all the way to plating to make it look like jewels and putting it in the hands of the end user, we have enormous verticality. So we have horizontal, 85,000 SKUs and a verticality. That generates a lot of interests for continuous improvement; so we have plenty of confidence in our ability to do better.

Christopher Glynn

analyst
#12

Great. If I could slip in one more, I just want to dig a bit further into the military, which had been weak for a while, and it sounds like it's fairly sharp and resetting levels there. Just wondering if you could provide some detail on — I think lumpiness is part of the military story, too. So just wondering how to factor that aspect in here.

Nick Pinchuk

executive
#13

I think what we're seeing is an encouraging situation. I mean, we are bleeding all over the military during the quarter — and further quarters. For us it was a big negative. It's really not there. But now it appears to have returned across a number of different projects, and they're not huge projects, they're smaller projects; so this is kind of a — we read it as an opening of the spicket. Every time — the guys in military told me that whenever a new administration comes in, no matter who it is, there's a new sheriff in the town ; they raise — we're going to have new procedures, the new procedures actually don't work. And so eventually, the war fighters say I need tools, and therefore, the spicket opens; that's what's happening now.

Bret Jordan

analyst
#14

I believe you mentioned there was some momentum in certain of the pricier products. Can you provide additional detail on that — for instance, how hand tools compare with high ticket, and then how storage compares with diagnostics among the higher ticket offerings?

Nick Pinchuk

executive
#15

Well, handhelds are roughly in line with the growth we saw this period. So if you're searching for mix, there truly isn't a mix narrative when it comes to the product lines; we don't find one. Taking a broader view, when you examine it, there's a great deal of product, especially hand tools, and those are approximately equivalent to our growth, more or less, equivalent to our growth. As for big ticket, you've got diagnostics performing more strongly than tool storage, since we just rolled out — and we rolled out the large ZEUS — ZEUS+, I believe it's $12,000. This thing is a monster, the top-of-the-line handheld diagnostic; and as a result it's been selling robustly. And you observe that alongside tool storage in the originations this quarter. So I think regarding the selling of — the selling to the franchisees quarter, you're witnessing a solid big ticket done somewhat more or more with diagnostics this quarter than in prior quarters thanks to the ZEUS launch. And then you observe hand tools more or less keeping pace with the average. All the others are the — the remaining cats and dogs are drifting around in there.

Bret Jordan

analyst
#16

All right, and now I have a question about the credit business. Clearly, base rates have risen, and I believe your yield stood at roughly 17.7%. Could you potentially push those yields higher? In other words, are you able to pass along part of the increased base rates on those loans? Or does that...

Nick Pinchuk

executive
#17

I'd like to respond to that, but Aldo has to get at least one question in, so I'll hand it to him...

Aldo Pagliari

executive
#18

Bret, I doubt it. What explains that is we keep our pricing unchanged. Ours aren't the cheapest anywhere globally. They mirror the credit quality of the borrowers we work with. So in the niche we operate in, they're definitely competitive. Yet our pricing has stayed fairly constant across the decade — not merely individual years, but the full 10 years — and as you likely remember, we're funded with long maturities; because of that, we don't face the same rising pressure on what our funds cost over the coming several years. Consequently, we usually keep the program as is; so that increase you're seeing at present most likely reflects somewhat improved customer credit profiles versus roughly 12 months back, though it's only marginal, correct, 17.6% to 17.7%.

Bret Jordan

analyst
#19

All right, and then one final item on the input cost side. What are you observing — how would you describe the cadence? I mean, whether we're talking about metal prices, labor, or clearly freight rates have declined, but what's the direction you're seeing for input costs over time?

Aldo Pagliari

executive
#20

Well, look, expenses are about the same. You get a few small areas where things get a bit better. Occasionally, you still find yourself having to make a spot purchase, and you're examining materials. So I'd say, generally speaking, as we mentioned previously, there is a degree of improvement, yet each day requires you to stay nimble and adaptable. Whenever you come through the door, something new comes up; so a little progress, but even so, you must put every resource you have on the table to handle it properly.

Gary Prestopino

analyst
#21

I've got a question for Aldo, so he's ended up with the second one. Well, I have one for you as well. Regarding that other category, Aldo, it appears there was a positive $15.2 million, and once you apply the tax effect, that comes to roughly, I believe, $0.20 of earnings, $0.21 of earnings. What is that exactly?

Aldo Pagliari

executive
#22

I'm not sure whether you're referring to other income, but if that's what we're discussing — actually, whether you believe it or not, Gary, on the cash we're holding, the interest income we're bringing in is at a significantly higher level than a year ago. You may recall, roughly 12 months back, you were receiving almost nothing on your money. At present, in effect, the corporation is making approximately 4.75% on whatever cash it happens to have.

Gary Prestopino

analyst
#23

Okay, alright, that clears that up. Now I'd like to ask about diagnostics and software. Nick, that segment is expanding. Do you see shops out there — and honestly, I find this hard to imagine — that had zero diagnostic tools and are now quickly adopting them because today's models carry far more electronics? Or is it mainly companies choosing to upgrade, purchasing a machine with greater power?

Nick Pinchuk

executive
#24

Well, look, certainly some shops lack diagnostics. There are folks who figure they can handle repairs on their own; and yes, self-repair is doable, though it consumes extra time; so the more seasoned techs believe they can work through certain jobs, especially at truck shops, where you notice that pattern more. Broadly speaking, though, diagnostics represent an upgrade, and customers are updating their software; what occurs — and this is the positive aspect, as I mentioned in my remarks — is that as drive by wire increases, you require further progress in software alongside hardware. That's partly why ZEUS+ has become such an astonishing success: it genuinely pushes everything ahead, with larger screens, simplifying things on the hardware side, plus it includes improved software. We've aimed to highlight that we continually generate concepts such as Mitchell 1, such as truck wiring diagrams. That might seem minor, yet it's problematic since if you must keep — it's genuinely useful because when you must keep hunting for a wire in a fresh diagram, it can be quite a riddle, and they're also focused on collision. Collision is surging. So developing software for collision — we're among just a handful of companies attempting that, and we view it as highly favorable. Thus plenty of opportunity exists there. The majority, however, truly hinges on the individual shop. If you mean solely the vehicle repair shop, most are upgrading existing equipment; sometimes, the shop definitely possesses something. That covers it. Sometimes, you're bringing in technicians who rely increasingly on diagnostics, so lacking a diagnostic unit currently, they're borrowing one. Alternatively, in truck or collision repair, they're only beginning to acquire diagnostics. That ground is somewhat more receptive.

Gary Prestopino

analyst
#25

All right. So when you're moving those diagnostic items that carry a bigger price tag, my guess would be that the software bundle included with them, or tied to them, also costs more than what you'd pay for a lower-end diagnostic.

Nick Pinchuk

executive
#26

Here's the thing, Gary — honestly, I'm not sure how we manage to offer it at the price we charge, yet we do. In our eyes it delivers strong value, but you're right that the software carries a bigger price. When someone makes that first purchase, the software is included for a set window, roughly 6 months. After that, a subscription can begin once those 6 months are up, or the customer can hold off until the 6 months pass and then subscribe, or they can simply wait 6 months and purchase a title instead. But if what you mean is — consider the one-off buy, say picking up a title, which gives you 6 months of fresh software: ZEUS sits above the tier below it, and above the one beneath that as well. So yes, it costs more.

Gary Prestopino

analyst
#27

And finally, do you see a scenario where, with EVs becoming more common in the aftermarket, you'd create a diagnostic device designed only for EVs?

Nick Pinchuk

executive
#28

Yes, but that's quite far away, since the initial step would be a diagnostic tool capable of servicing both internal combustion and EVs, as they will occupy the same space for quite a while. For a long time, they'll be kicking up the same road dust. So the key point is that you'll require a wide range of that, in both software and tools. That's what will occur. In time, EVs could replace plug-in hybrids or whatever comes about in that scenario, and that will shift the car part. But it's a lengthy process. There's no singularity here; yet when they begin to gain some market presence, you must begin incorporating them into your diagnostic software so you assist technicians in handling them just as you assist them with the 650-horsepower BMW M5 competition.

Liz Lane

analyst
#29

Thanks. To start, I'd like to ask about the financing arm. Looking at your outlook, do you perceive any risk when it comes to originations if your customers begin moving away from some of those larger ticket purchases toward smaller ones, and as credit conditions generally become tighter, would that affect whether your customers can or want to take on more debt for those big purchases?

Nick Pinchuk

executive
#30

Honestly, I'm not sure. That's quite a question. There are many hypotheticals packed in there. At this moment, I don't believe we're seeing risk. On big ticket items, people appear to be strong. One thing we've been saying — I believe I mentioned this at the conference — is that it feels almost like there are 2 economies: a financial one and a physical one. Right now, the physical economy feels quite energized. We observe that through the uptake of big-ticket items, which shows their confidence. In earlier downturns, rates weren't actually the factor, since our rates don't change; it wasn't rates or the actual dollars from technicians that drove the decision; it was how they felt mentally. To put it another way, what mattered was the <<inaudible>> election; it comes down to psychology <<inaudible>> . So essentially, during the great financial recession, we would have described it as economies bloom, repair shops hum, and they continued operating. So yes — yet they woke up daily and got bad news for breakfast across every show and in the newspaper. As a result, they felt uneasy about committing to long-term, long payback items, even though they had the funds. So I don't expect the money to disappear, but their attitude could shift, based on how much bombardment they receive. That's genuinely how I think the world will unfold. Repair is essential. It continues. Yet customer mentality can move between big ticket and small ticket. We observed this — if you want proof, look back to just after COVID. As everyone emerged from COVID, they had money and garages and never paused, but their attention was on small ticket items rather than big ticket. Then, once they grew more at ease and experienced that psychological recovery and exhilaration, they began moving to big ticket. That's our observation.

Liz Lane

analyst
#31

Yeah, understood. And it definitely tracks that the mood over here on Wall Street would look a bit different from what you'd find on Main Street. So that part makes sense to me.

Scott Stember

analyst
#32

Nick, you mentioned that collision is booming. I just wanted to draw that out a bit more. How much of that comes simply from a volume perspective on the collision side — which I assume you'd see through greater purchases along the car, or just collision equipment — as opposed to rising need for diagnostics tied to ADAS on the collision side?

Nick Pinchuk

executive
#33

No. It's both of those. I'd say more and more, within collision, folks are increasingly interested in — as things move ahead with that kind of ADAS scenario, where calibration comes into play and you're setting up the sensors' neural network. And also, items like what we discussed regarding Mitchell 1, with that special software aimed at collision, since people keep recognizing that job more and more. Two things are going on — 3 things are going on, I guess. Number one, there are many different materials in a car these days; so you simply can't bend steel, you've got to cut things like carbon fiber and so forth. So we sell a lot of different physical products that enable that. That was — that's a trend that's been around a long while. And next, since neural networks have grown more ubiquitous, they require plenty of software and hardware aimed at that to recalibrate and get it done. And then third, collision shops are picking up more jobs because collision work has been taking more time. If you doubt that — when you bang up your bumper, look at what it costs you, and how long it takes before you get it replaced. Those things are taking longer; so there's extra work for the collision shop. So they're looking at 3 factors: one, the material, two, dealing with the neural network and three, simply managing the volume and achieving productivity.

Scott Stember

analyst
#34

Understood. Now, a quick clarification on the Tools segment — shipments into the van channel compared with sales out to end users, did those two track closely together?

Nick Pinchuk

executive
#35

This quarter, yes, they tracked closely and stayed fairly well matched. They move around, yet our sense is that the two are basically aligned, and that has held true. Quarter to quarter, they swing. Even so, this quarter came in fairly steady. It's possible a bit more is going out the van — the selling into that channel — perhaps slightly, though nothing meaningful; so it's quite solid.

Scott Stember

analyst
#36

Okay. One more thing — I want to circle back to what Bret asked regarding how the Tools Group breaks down. From what I can tell, tools or hand tools moved up roughly in step with the segment as a whole. Could you maybe highlight any new products that stand out? Are there different ways you're selling? Are you packaging certain items together? I'm just curious what's happening there.

Nick Pinchuk

executive
#37

Many different factors. Basically, the standout driver for the Tools Group right now is ZEUS+, a high-priced product at $12,000; so it's moving through that business. That's what draws your eye. I brought up this Neon Stinger, and I wasn't exaggerating. It was selling extremely fast. We displayed it at our kickoff and the reaction was enthusiastic since <<inaudible>> technicians want to make a statement; so tool storage has some strong offerings. So a new model and diagnostic is fueling that. There are some genuinely good innovations in tool storage. And in hand tools, there's a variety of items, including things such as new pliers; we've got a lineup of new pliers that everyone adores. I spoke with the franchisees, as I mentioned, a few weeks back. And these folks pulled out these pliers and began describing how fantastic they are and simple to sell since they work so well, how they grip. They hold extremely well, 3 positions, so you can tackle any kind of job. People love them. So you're seeing that, and on top of it we're bundling some items such as impact sockets, assembling some impact sockets in cases where they weren't bundled previously. So impact sockets or the things you use are really hard and tough like trucks, you truly need plenty of power; so the sockets must be a different size. Less hard but stronger, thicker wall and so on. So we see those arriving, perhaps aimed at the truck shop. Those are the sorts of things pushing the situation; but it's always like that. There's always a product story.

David MacGregor

analyst
#38

I'd like to begin by asking about the overall revenue mix. Are you noticing any change in the proportion of revenues coming from technicians as opposed to independent garage owners and dealerships?

Nick Pinchuk

executive
#39

Not truly. I suppose one could frame it that way. Here's what I'd say. Only in this particular respect, and definitely not within the Tools Group. Within the Tools group, I don't observe it. One could make that argument, fine — often you find garage owners who happen to also be technicians. They're likely the number one purchaser of ZEUS+. So in that respect, you might notice more of that. But whenever you introduce the top of the line diagnostic unit, that's what you observe. So once you account for our expectations in that manner, no change appears in the Tools Group. Turning to RS&I, sales of repairs, software and diagnostics to independent repair shops did rise. The 2 major drivers in RS&I were the OEM businesses keeping pace with new models plus the equipment, though equipment divides fairly evenly between garages and independent shops. So overall, you'll notice a modest tilt toward OEM garages on the RS&I side. On the tool side, you won't notice much of any mix change, except that ZEUS+ always seems — the big kahuna always sells with a strong shop buy. That's about all. Beyond that, no change is apparent to us.

David MacGregor

analyst
#40

Let me stay with the garage owners a bit longer, Nick. Your contract receivable has risen 9.2%. Do you get the sense that garage owners might be beginning to have somewhat more trouble obtaining credit, and are turning back to Snap-on credit as another option?

Aldo Pagliari

executive
#41

The contract receivables are likely tied to the franchisees, along with the van leases and inventory, so...

David MacGregor

analyst
#42

Yeah, let's include those too. I'm simply asking, is this cohort encountering a greater hurdle when it comes to secured credit?

Nick Pinchuk

executive
#43

David, that would be a natural outgrowth of poor — perhaps elevated credit; however, I'm not picking up on that. I'm not sure. You're also someone who watches the road ahead. I mean, in my own windshield observations, that's not what I'm hearing — no one is telling me that. And what I'd add is that our sense came from observing our franchisees and hearing from them about the technicians: their balance sheets look quite strong. So sure, that could occur, yet I don't believe it's occurring at present. I don't believe that's taking place right now. In my view, this is a fairly strong sector. We haven't — we did not observe it being manipulated during the great <<inaudible>>. They exercised more caution, but they remained fairly liquid. So I'm not sure. It might occur, but regardless, I'm not hearing it.

David MacGregor

analyst
#44

Okay. And then regarding storage, plus possibly the other segments where sizable backlogs exist. Could you provide a sense of just how far into the future those orders stretch...

Nick Pinchuk

executive
#45

Way too far; that's the reason we find ourselves at a factory. Look, that is — I personally visited these franchisees. I'm not sure whether you can repeat this many times, should you want to, but these folks keep telling me every single tool storage box they receive is sellable. Backlogs extend quite a distance; I'd rather not delve into that topic. Yet it's fairly significant, likely more extended than we'd prefer. But at times we ask ourselves — here's what I'd say, just a thought, considering that at times we ask ourselves whether things are better when the queue is lengthy. It causes people to desire them even more. I'm not certain. Do you follow what I'm saying? Since everyone seems to want a Snap-on box. So perhaps it simply renders it more appealing, similar to when you must wait ages for a car. Still, we'd prefer to reduce this backlog. That's the reason we're upgrading our factories across essentially every category. Nearly every one of our product lines is completely overwhelmed and striving to produce output from the plants; though the one that pursues us hardest is tool storage since wherever we go, folks say, I require additional. I require additional. I require additional.

David MacGregor

analyst
#46

Nick, is there any particular reason the regional kickoff events included discounted bundles for storage? It strikes me as strange to cut prices on something tied to — your backlog.

Nick Pinchuk

executive
#47

Not at all, since discounted packages are something we provide at all times. That gives people a motive to purchase right away. One could argue, fine, the discount bundle isn't mandatory. Yet the truth is, David, the truth is, our franchisees have been trained to close some form of promotion. What we're skilled at is shaping that promotion to be appealing yet either slimmer or more generous, based on how we're looking to shift the product.

David MacGregor

analyst
#48

Understood. For my final question, I suppose, considering how robust big-ticket sales have been, Nick, and also — regardless of whether someone is on Wall Street or Main Street, the macro environment is decelerating. So I suppose, what makes you confident that you aren't borrowing against future technician purchasing power in a way that hurts hand tool sales and later growth at some point?

Nick Pinchuk

executive
#49

Honestly, hand tools don't concern me much. They really don't. What I mean is, we — hand tools have remained powerful through thick and thin. I mean, I think — I mean, I've only worked here 15 years. So perhaps that isn't sufficient time. But here's the thing: it appears that hand tools — if you mean the items with longer payback periods, like what I was discussing with Liz, eventually, at times, the psychology around all of it gets through and even the folks who work daily and bring in the money, they'll say, I'd like to hold onto my resources for a bit, occasionally. Yet that's a mental equilibrium where, in my view at present, there are enormous wells of optimism among working people. That differs from the large corporations. When you check the National Association Manufacturers, and when you compare small manufacturers against large manufacturers. Suddenly there's a significant split separating them regarding their optimism, their outlook. The small ones have virtually never been more positive. So I believe that's part of the situation. I believe there's plenty of discussion. Like you mentioned, there's plenty of discussion and we just observed — I'm not claiming it's incorrect or anything of that sort. But when you enter — when I enter a garage or meet the franchisees, what they're asking is, who is this person, this individual, Paul, I don't even recognize who he is.

David MacGregor

analyst
#50

That was a solid quarter. Nice work, Nick.

Luke Junk

analyst
#51

We're probably a bit tight on time, so today I'll keep it to a single question. What I'd really like to get a handle on is this — Nick or Aldo, could you break down a bit further the gross margin improvements we saw in both the Tools Group and C&I this quarter, particularly since I'm trying to figure out how much normalization is currently showing up in the margin when it comes to price, what's happening on the material cost side, and whether you view that as something we can count on or whether there could even be additional upside ahead?

Nick Pinchuk

executive
#52

Well, look — this is something I enjoy doing. So I'll take it. Look, with C&I, it's straightforward. Critical industries, boomshakalaka. Within that area, critical industries represent the highest margin business; the margins are strong and they performed quite well. And as we discussed regarding the military — I'm not sure whether you caught that call — but the military tends to be the base by base kind of product that we're getting, and that's what's driving it. And that tends to be quite good. So I think that's one element you're seeing in there. That's quite strong; they were up — critical industries rose by more than 11%. And principally, I think that's what propelled the margins. There were other factors — I mean, another factor is that overall, the supply chain is improving, but with some of this stuff, you go out and purchase a whole bunch of items, and when you <<inaudible>>, you purchase a lot since you don't want to be in a position of not having them. So some of those items are gradually working their way through. So it's a really complicated mix. We are seeing some abatement, and that ought to keep going. And — but mainly, the major element there, the 190 basis points, related to critical industries performing well. The customized kits are excellent for us and they sold, we cleared some of the bottlenecks, and we did well in that scenario. So that's C&I. When you look at Tools Group, it's — there's no product mix story, which I think some folks were speculating about; it wasn't that. Rather, it's the fact that there's an attenuation in the commodities, so with the commodities — Tools Group is heavily vertically integrated, so in many situations they purchase commodities. So they get a nice pop from that. And so they're seeing some improvement in that scenario. Naturally, they're easing off on the pricing in concert with that. And then the Tools Group has been grinding away at RCI. So you see a lot of that taking place in this scenario. So we believe the whole thing can be sustained. I'm not saying the Tools Group's OI margin will hold steady in the coming quarter. That said, we don't believe they're unable to improve — we think there's potential for it to climb, though maybe not in the next quarter. From RCI, plus sorting out the situation in a rational way, we see room for an upward move.

Sara Verbsky

executive
#53

We appreciate everyone being here with us right now. Shortly, a recording of this session can be accessed at snapon.com. As we always do, we thank you for your interest in Snap-on. Have a good day.

Operator

operator
#54

Appreciate it. That brings the call to a close. Thanks for joining us for today's presentation, and you're free to hang up at this point.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Snap-on Incorporated transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.

Get the API View API docs →

This call discussed

For developers and AI pipelines

Programmatic access to Snap-on Incorporated earnings transcripts and 132,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Snap-on Incorporated or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.