Snap-on Incorporated (SNA) Earnings Call Transcript & Summary
October 19, 2023
Earnings Call Speaker Segments
Sara Verbsky
executiveThanks, Rocco, and good morning to all of you. We're glad you could be with us today as we go through Snap-on's results for the third quarter, which you can find laid out in the press release we put out earlier this morning. Joining us on this call are Nick Pinchuk, who serves as Snap-on's Chief Executive Officer, and Aldo Pagliari, Snap-on's Chief Financial Officer. Nick is going to open things up this morning by sharing how he sees our performance. After that, Aldo will walk through our financial results in greater detail. Once Nick offers a few closing remarks, we'll open the line for your questions. As we always do, we've made slides available to go along with what we discuss. You can get to those slides through the Downloads tab inside the webcast viewer, and they're also posted on our website, snapon.com, in the Investors section; both the slides and a transcript of today's call will be kept on our website for future reference. Anything said on this call that relates to management's expectations, estimates or beliefs, or that otherwise addresses management's or the company's outlook, plans or projections, counts as forward-looking statements, and actual results could end up differing materially from what's expressed in those statements. You can find additional information, along with the factors that might cause our results to come in materially different from what our forward-looking statements suggest, in our SEC filings. Last, this presentation contains non-GAAP measures of financial performance, and those shouldn't be looked at on their own or treated as a replacement for the comparable GAAP figures. You can find more details about these measures in the earnings release we issued today, which is available on our website. So with all that covered, I'd like to hand the call over now to Nick Pinchuk. Nick?
Nick Pinchuk
executiveAppreciate that, Sara. Good morning, everybody. I'll kick things off, same as I always do, with what stood out this quarter, then I'll talk about the broader picture and the patterns emerging. After that, Aldo will take you through a thorough look at the numbers. Regarding the past 3 months, I can say plainly and without hesitation that we once again feel encouraged and strengthened by how far we've come along our runways for both growth and improvement. We hit headwinds and dealt with difficulties across several geographies. Even so, we seized our opportunities, leaned on our strengths, and moved past any potential for disruption. Our franchising network remained resilient, posting positive gains. We saw significant, widespread gains across key sectors, extending what has become a steady climb driven by a strong market, an expanding lineup of products, and solid capacity to grow within that business; and those results clearly showed up in our figures. The numbers tell the story on their own. Sales as reported reached $1.159 billion, a 5.2% increase over the prior year, with organic growth of 4.7%, along with $4.4 million from favorable foreign currency movements, and every segment contributed growth. That represents our 13th consecutive quarter significantly above pre-pandemic levels. Opco operating income, or OI, excluding financial services, rose 9.7% to $245.2 million. On the Opco side, operating margin rose 90 basis points, reaching 21.2%. That gain came as larger sales volumes, gains from excellent new products, and the continuing efficiencies of rapid continuous improvement, or RCI, outweighed 50 basis points of negative impact tied to unfavorable foreign currency effects — 21.2% and 90 basis points, that's great. In our financial services business, operating income increased to $69.4 million, up from $66.4 million a year earlier, which is a 4.5% improvement. Combined with how Opco performed, that pushed our consolidated operating margins up to 25.1%, which is 70 basis points higher than 2022. EPS came in at $4.51, which reflects a 37 — or 8.9% increase above last year. Strong — well, those are the numbers. Once again, strong, which shows our corporation's continuing advances. So, once again, our view is that Snap-on has never been in a better position than it is right now, and the numbers confirm that. Now, let's turn to the markets. When it comes to vehicle repair, the important measures remain positive — vehicles on the road keep getting older on average; and as a result, the count of techs working in garages is increasing at a high to mid-single digit rate, which keeps up a steady positive pattern from one period to the next, one period to the next. That is unmistakably trending up. Pay for technicians is solid and keeps rising. So the market looks good, and the metrics support that. Beyond what the numbers show, talking with the techs themselves leaves you sensing hope and possibility. Not long ago, I got to spend time with some of the folks who buy from us — the mechanics running franchises in New York — and I have to say, the excitement they showed about this business, along with the belief they voiced about what lies ahead for them, was truly remarkable. You could feel it spread. Even with conditions so uncertain, their message rang out unmistakably: what they see is chance, and they're hungry for a bigger share of it. They're after additional inventive answers that boost output and capitalize on that promise, and you can really feel how sure they are about what lies ahead, and in our view, they regard Snap-on's products, brands and people as the finest route to securing that favorable tomorrow. The market for fixing vehicles is robust. This is something we observe across the franchise network in North America as well as in our operations abroad. That's among the reasons we added capacity. In our estimation, our franchisees and technicians have never enjoyed such prosperity. The logic holds together. Increasingly, the car park calls for additional repairs of a more intricate nature. And our customers, the tax, play a major role in that reality. To go after those openings, they need—and they need new kinds of equipment. Snap-on is positioned to take maximum advantage of that chance. Another crucial category for us involves people who own and run automotive service businesses. Typically, these folks are side by side with the text every day, but when they buy things, the timing patterns vary. That's precisely where the repair systems and information group, known as RS&I, operates each day with an advantage. The mix of vehicles on the road is changing. Shops must continually adapt model by model, facing fresh challenges — fresh challenges they must steer through, electronics needed to back more features, automotive systems that improve driver safety, new body materials that raise durability while cutting weight, net worth of sensors to foresee traffic and road conditions, new powertrains, improved internal combustion engines, EVs and plug-in hybrids for conserving energy, and so forth and so on. Every one of these shifts opens opportunity for garages, and they're aware of it. Yet they're also aware that it demands new and more advanced equipment, the opportunity — that opportunity, in our eyes, beams straight through political uncertainty or economic turbulence. Beyond that, we see what they need every day when we walk into the garages: fresh software to steer repairs or operate the shop, essential programs built for the peculiarities of modern vehicles, calibration procedures and complex setups for sensor arrays, plus sophisticated undercar equipment that delivers the accuracy required for efficient driving. We also watch shop owners and managers who are eager to capture those shifts, and Snap-on has both the hardware and the software to turn that ambition into reality, bringing prosperity to the shops — and what we're seeing in RS&I demonstrates just how powerful that market is and how firmly we are positioned inside it. Finally, let's turn to the critical industries; there we go past the garage, taking on work that genuinely matters. Commercial industrial—what we call C&I—is the segment we're talking about here, and it's also where a lot of our overseas business happens. Within it you'll find mission-critical work: declaring space, servicing wind towers, mining beneath the sea, smelting at temperatures above 2,300 degrees fahrenheit, getting first responders deployed. In all those settings, a failure carries a steep price, and because repeatability and reliability matter so much, customers often need specialized tools made for a single task—in other words, work that requires a Snap-on solution. Demand has stayed exceptionally robust, just as it was in earlier quarters. Momentum is showing up in several places, among them the military, general industry, aerospace, heavy-duty and aviation. Of course, the picture varies from one region to another. After all, this company does business around the globe. Some places face outside pressures that cause disruption — in Europe, there’s uncertainty tied to the Ukraine war; in Asia, the aftereffects of the pandemic remain quite visible; China is experiencing instability; and recent currency depreciation is hurting specific nations. Even so, on balance, the vital industries are strong. That gives us considerable room to capitalize and achieve meaningful gains; during the quarter, that is exactly what we did. So our markets are holding up well and trending favorably, and we expect our growth run rate to bring obvious and plentiful opportunities ahead, strengthening the franchise network, growing the ranks of repair shop owners and managers into those essential industries and building in emerging markets. Moving upward and onward by capitalizing on our expanding product range, applying our increasingly powerful brand and putting to work a growing grasp of the job that defines the Snap-on team. That covers the market. Let’s now move on to the segments.
Nick Pinchuk
executiveWithin the C&I segment, we saw third-quarter sales hit $366.4 million. That's a gain of $9.6 million, and it factors in $1.6 million from unfavorable currency movement plus organic growth of 3.2% versus the prior year. Turning to profitability, operating income for C&I came in at $58.1 million, rising 11.1% — a double-digit increase — even with $2.9 million of adverse foreign exchange impact. Operating margin landed at 15.9%, which is 120 basis points higher, and that absorbed 70 basis points of currency headwind. There was some unevenness among the business units in this group, with significant improvement in the Industrial Division more than compensating for softer results in Asia. Yet as always, the C&I performance demonstrated how effective our Snap-on value creation is, especially when it comes to customer connection and innovation — producing excellent new products and solutions that simplify critical tasks, such as our new CT9038 power tool. We mentioned this last quarter, noting that franchisees were anticipating its release — and it certainly lived up to expectations. This is a remarkable tool: a 3/8 inch drive, 18-volt impact unit with a compact housing that measures just 5 inches in length. That's the reason we refer to it as the stubby. Its distinctive shape comes from designing the overall housing mechanism to stabilize the electric motor, instead of the usual method of adding a separate independent structure to hold the drive components. This innovation shrinks the overall body dimensions, letting users reach extremely tight spaces; and trust me, that's a compelling benefit for engine and suspension work on newer vehicles. And it accomplishes this while still producing 520-foot piles of bulk breakaway torque. That's enough power to free even the most stubborn and seized fasteners. It's exactly what you'd anticipate from Snap-on. It's ergonomically balanced, significantly cutting down on user fatigue. It comes with a super bright LED light that clearly illuminates the workplace; it also provides three torque settings, forward and reverse, and a variable speed trigger that lets techs apply precisely the necessary force, preventing the fastener damage that frequently occurs in tight spaces. The September launch was huge, far exceeding demand. That's clear proof of how much people appreciate the Stubby's Compact Power, and it continues to show excellent momentum. Orders are still very strong; waiting was definitely worthwhile. The C&I product news is encouraging, but there's a different story within the group. Our Industrial division, which brings the Snap-on brand to critical industries. We've noted before that the opportunity existed — what was required was additional capability to execute. And that's precisely how it unfolded. We reached capacity for kidding, and it generated results; expansion arrived in the fall of last year; and this recent period marked the third consecutive quarter of unmistakable double-digit growth in the critical industry; and that came with robust margins. Gangbusters, gangbusters margins, gangbusters growing. It got past the C&I difficulty in Eastern Europe and Asia. And we think there's far more room to advance in the critical industries arena; so we're currently adding more capability in that business to seize the full opportunity. Okay, so that was C&I — big hurdles cleared thanks to solid offerings and added production capability, which pushed things higher across those essential sectors, plus there's still more ahead. Moving over to the Tools Group now. The sales line grew organically by 3.7% compared with a year ago, hitting $515.4 million during the quarter, and that quarter wrapped up with terrific — wrapped up with terrific momentum; the group's operating income also kept climbing sharply, landing at $113.4 million, which is an 11% gain, a double-digit gain versus 2022 levels, marking yet another one in that string of double-digit improvements for the Tools Group; as for operating margin, well, it came in at 22%, which is 140 basis points higher than a year ago, and that gain — that sizable gain came despite absorbing 50 basis points of adverse currency movement, so a fantastic quarter for them on both profitability and growth; now, the third quarter is when our annual Snap-on Franchise Conference takes place, or as we refer to it, the SFC. This year it was a national event with 9,000 people present — franchisees, guests and naturally, the Snap-on team, all taking part in a weekend of special — in a fantastic weekend. It was a weekend full of special training, hands-on encounters with our enormous product line and for some fun — for some fun special Snap-on celebrations, and those were really great. Those attending got the chance to place orders right there on the Tool Expo Floor, and I'm pleased to report orders rose once again this year, which — and that expo covered an area larger than 3 football fields, where our full portfolio of products was showcased, but it also featured a broad array of demonstrations built specifically to highlight the Snap-on performance advantage. The conference additionally offered quite a few training sessions, assisting franchisees in growing their business, seminars and special breakout sessions spotlighting our product features and distinct advantages in key categories such as power tools and diagnostics, and we capped off that multi-day event. These are the celebration with a fleet of coach buses, carrying the team to Downtown Nashville for a unique Snap-on evening — Boom Shakalaka was the phrase of the day. It was yet another memorable SFC, with insightful education, excellent new products and a special fellowship, a special fellowship that strengthens our distinctive bond with our franchises. From where I sit, our van drivers in Nashville talked eagerly about their present businesses and showed steady confidence in their future with Snap-on. And had you been there, you'd have witnessed it as well. Throughout the Tool Expo, franchises could spend time engaging with some of the new innovative products born from our customer connections. Insight gathered straight from the workplace. Hand tools were a major focus at the SFC this quarter, and that demand came from specialty new products such as our 12-millimeter, 6.6-liter DuraMax glow plug socket. This product came about because a franchise observed technicians taking off blocking components one at a time, from a diesel vehicle fender well, special intake lines and steering shafts. Such parts put up roadblocks to access, which makes even the simplest fix — merely swapping out diesel glow plugs — harder to perform, an ordinary job turned troublesome by a tightly packed engine bay engineered with little thought given to maintenance. We took in what the franchisees told us, got to work, and came up with a fresh socket, built longer than the usual one so the glow plugs could be reached from farther away. Plus it has a flex mechanism that steers around the obstructions, so taking them out is no longer required. Techs right away saw how much time this saves — and the new socket became a big hit; it's one more customer connection that reshaped a grueling task into something simpler, opening up time and boosting tech capacity and in turn, tech income. Another customer connection example was also shown, the new FHC72MPRR, these product terminations sure are a tongue twister. Triple — well, it's — what we call a triple function ratchet. Three tools rolled into one, once more, stemming from customer connection right at the point of pain. To start, the ratchet head locks in parallel with the handle, working as a standard ratchet. After that, the head can be set into any one of 16 positions, 240 degrees around the handle's central line, letting the tool operate while reaching around obstacles.
Nick Pinchuk
executiveTo wrap up, this unit is capable of operating in a free spin setting, which gives the technician a full 360 degrees of uninterrupted rotation, cutting down significantly on labor time when torque is low. Our techs—the customers themselves—once again recognized how much this productivity gain mattered. That acknowledgment turned the triple function ratchet into a $1 million hit product within just its first month on the market. This marked yet another victory built on customer connection and served as a growth engine for the Tools Group. The Tools Group's Q3 results and momentum—powered by customer connection, innovative insight, and the launch of excellent new products—combined with the group's ongoing commitment to Snap-on value creation, lead us to believe that more successes and progress will continue to arrive. Now shifting to RS&I. Third quarter sales reached $431.8 million, rising 4.3% as reported, with organic growth of 3.1%. Gains in undercar equipment along with our diagnostics and information portfolio kept compensating for the OEM businesses, which ended slightly lower in what is traditionally an uneven space. RS&I's OI came in at $104.9 million, climbing 10%—once again double-digit growth over 2022. Our operating margin came in at 24.3%, which works out to an increase of 130 basis points, and that happened even with a 20 basis point hit from unfavorable foreign currency. We feel really good about our RS&I business. That same optimism is shared by our customers along with our industry partners. You could see that optimism reflected in a recent piece of public recognition. Motor Magazine recently named our ZEUS+ Fast-Track Intelligent Diagnostics platform one of 2023's top tools. Our premium handheld got that honor because it simplifies repairs, guides technicians through diagnostic steps, helps them avoid unnecessary work, improves how accurate solutions are and—above all—cuts down how long it takes to identify the right fix. When it comes to vehicle repair, the ZEUS+ represents the very top, and the publications out there acknowledge that. The new bright screen on our handheld got special mention—it's much simpler to read when you're out in the sun. A faster chip plus extra built-in storage means jobs get done more efficiently. And the improved labscope gives you significantly better precision when testing components. Professional Tools and Equipment News asked its readers to pick their favorite new tools for that publication's People's Choice Awards, and technicians picked 7 Snap-on items, with the ZEUS+ at the top of the list. ZEUS+ is genuinely the best we offer—its hardware and software were developed through close customer collaboration, making it yet another in a series of unique, bold RS&I offerings that keep driving the group forward and higher. We have a lot of optimism about what RS&I can achieve with repair shop owners and managers as the vehicle industry changes, and this quarter's results confirm that belief. Those, then, are the main points from this quarter. We've kept up solid momentum, marking our 13th consecutive quarter surpassing where we stood before the pandemic. In C&I, margins improved compared to last year, volume grew, and operating income margins were very strong. The Tools Group has excellent products, reliable franchisees, and considerable momentum. RS&I is spearheading undercar repair formation efforts, helping repair shops handle the difficulties presented by modern vehicles, and this applies to the corporation as a whole. Sales up 5.2% as reported, 4.7% organically. At the Opco level, our operating margin came in at 21.2%, which represents an increase of 90 basis points, and that was achieved despite 50 basis points of headwinds from currency. Earnings per share reached $4.51, an improvement of 8.9% compared with the prior year. We viewed this as a promising quarter. At this point, I'll pass things along to Aldo. Aldo?
Aldo Pagliari
executiveThanks, Nick. On slide 6 you'll see how we performed on a consolidated basis. Net sales for the quarter were $1.159.3 billion, an increase of 5.2% over what we posted in 2022. Within that, organic sales contributed a 4.7% gain, and foreign currency translation added $4.4 million on the favorable side. All three of our operating segments chipped in evenly to the organic growth, and by region we delivered year-over-year improvement in North America, South America and Europe. Asia was still sluggish because of weakness in China and Japan — and in Japan's case, the depreciating end added pressure. On the bottom line, consolidated gross margin came in at 49.9%, up 160 basis points from 48.3% in the prior-year period. Every operating segment recorded margin expansion. Higher volume, pricing moves, lower material and other costs, plus gains from the company's RC&I initiatives all helped, though those were partially canceled out by a 50 basis point hit from unfavorable foreign currency. Compared with net sales, operating expenses rose 70 basis points, landing at 28.7% against 28% a year earlier, driven mostly by heavier spending on personnel and other costs. For the quarter, operating earnings before financial services hit $245.2 million, an increase from $223.5 million in 2022. As a share of net sales, operating margin before financial services was 21.2%, a figure that reflects 50 basis points of unfavorable currency effects and marks a 90 basis point expansion from last year. In the third quarter of 2023, our financial services top line came in at $94.9 million, up from $87.3 million during the same period last year, and operating earnings stood at $69.4 million, compared with $66.4 million in 2022. For the quarter, consolidated operating earnings totaled $314.6 million, versus $289.9 million a year earlier. When measured against revenues, our operating earnings margin was 25.1%, which is a 70 basis point gain over 2022. The effective income tax rate we saw in Q3 was 22.6%, up from 21.6% the prior year. We recorded net earnings of $243.1 million, equal to $4.51 per diluted share, and that figure includes a negative $0.08 per share effect from foreign currency. Compared with where we stood in 2022, that's $19.2 million higher, equal to $0.37 per share, which translates into an 8.9% gain in diluted earnings per share over the prior year. Turning to how each segment performed this quarter. Starting on Slide 7 with the C&I group. We posted $366.4 million in sales, above last year's $356.8 million, as organic revenue rose $11.2 million, or 3.2%, though unfavorable foreign currency translation of $1.6 million worked partly against that. Within organic growth, sales to critical-industry customers climbed by a double-digit percentage, while Asia Pacific operations for this segment fell by a double-digit rate, which partly canceled that out; looking at critical industries specifically, military sales came in strong, and aviation activity was strong too. When you add everything up, organic sales to outside customers in C&I climbed 7.1% during the quarter. In Q3, gross margin came in at 39%, a gain of 210 basis points, compared with 36.9% during 2022. The primary reasons were higher volumes sold, the critical industry sector's stronger gross margin, pricing moves, and gains from RCI efforts; those positives were partially offset by a 60 basis point hit from unfavorable foreign currency. Operating expenses as a share of sales for the quarter were up 90 basis points at 23.1%, versus 22.2% in 2022. This was mostly due to larger sales, businesses that carry more expense, along with spending on personnel and other items. Turning to the C&I segment, we recorded $58.1 million in operating earnings. That figure absorbed $2.9 million in negative foreign currency impacts, and compares with $52.3 million during the same period last year. Our operating margin was 15.9%, a figure that carried 70 basis points of currency headwinds, against 14.7% in 2022 — a gain of 120 basis points. Let's now turn to Slide 8. Sales for the Snap-on Tools Group reached $515.4 million, compared with $496.6 million one year ago, driven by organic sales growth of 3.7% plus $500,000 in positive foreign currency translation. Within that organic number, our international operations posted a double-digit increase, while the U.S. business grew at a low single-digit rate. Gross margin for the quarter rose 140 basis points, reaching 46.3%, compared with 44.9% a year ago. The main drivers here are greater unit sales, price increases, and gains from RCI programs, though those were partly canceled out by a 50 basis point drag from currency translation. On the expense side, operating costs relative to sales came in flat versus a year ago, as the advantage of moving more volume was offset by higher staffing and miscellaneous expenses. Within the Snap-on Tools Group, operating earnings reached $113.4 million, a figure that absorbed $2.7 million in negative foreign exchange impact, up from $102.2 million a year earlier. At 22%, the operating margin carried 50 basis points of currency headwind, compared with 20.6% in 2022 — a gain of 140 basis points. Now let's look at the RS&I group on Slide 9. We brought in $431.8 million in sales, up against $414 million for 2022. That works out to organic growth of 3.1%, plus $4.8 million gained from favorable foreign currency translation. Within that organic increase, undercar equipment sales rose by a high single-digit percentage, while diagnostic and repair information products sold to independent shop owners and managers grew by a low single-digit percentage. Partly offsetting those gains was a low single-digit drop in business with OEM dealerships, a channel where essential programs tend to fluctuate from one period to the next. On gross margin, we went from 42.9% last year to 45.5%, a 260 basis point improvement, driven mainly by reduced material and other costs, higher sales volumes, and savings from RCI initiatives. On the expense side, costs relative to sales climbed 130 basis points, reaching 21.2% versus 19.9% a year ago, largely driven by higher personnel and other expenses. The RS&I Group posted operating earnings of $104.9 million, up from $95.4 million in the prior year. Its operating margin came in at 24.3%, a 130 basis point improvement over the 23% reported last year. Moving now to Slide 10. Financial services revenue rose $7.6 million, hitting $94.9 million compared with $87.3 million a year earlier, mainly on growth in the loan portfolio. Operating earnings for Financial Services were $69.4 million, against $66.4 million in 2022. Expenses in financial services grew $4.6 million versus 2022 levels, and that figure includes $4 million tied to a higher provision for credit losses. If you look at the provision increase versus the prior-year quarter, there are two drivers behind it: growth in our portfolio, and a return to provisioning levels we'd view as more normal, closer to what was typical before the pandemic. Looking at it quarter over quarter, credit loss provisions declined by about $500,000. For context, our total global extended credit, or finance receivable, portfolio has grown 9.3% from a year ago, and at this point we see delinquency and portfolio performance trends as stable. During both the third quarter of 2023 and the same period in 2022, finance receivables generated an average yield of 17.7%. Contract receivables posted an average yield of 8.8% for Q3 2023, compared with 8.6% in Q3 2022. We saw total loan originations hit $305.2 million in the third quarter — a $5 million increase, or 1.7%, over 2022's figure — and finance receivables originations contributed a 4% gain within that. Now let's look at Slide 11. As of quarter end, gross financing receivables on our balance sheet totaled approximately $2.4 billion, of which $2.1 billion originated from our U.S. operation. For U.S. extended credit, the 60-day plus delinquency rate stands at 1.5%, matching what it was during this period a year ago; measured sequentially, that rate has climbed 20 basis points, which mirrors the seasonal pattern we normally see in the third quarter.
Aldo Pagliari
executiveWhen it comes to extended credit or finance receivables, net losses on a trailing 12-month basis came to $47.9 million, or 2.51% of outstandings at the close of the quarter, a modest increase over the 2.45% we reported at the end of the prior quarter. Moving now to Slide 12. Operating activities provided $285.4 million of cash during the quarter, equal to 115% of net earnings, versus $129.9 million a year earlier. The gain relative to the third quarter of 2022 mainly mirrors smaller year-over-year growth in working investment, along with stronger net earnings. Investing activities used $59.7 million of net cash, which encompassed $35.1 million of net additions to finance receivables and $25.1 million of capital expenditures. Financing activities used $135.3 million of net cash, including $85.6 million of cash dividends and the buyback of 194,000 common stock shares for $51.8 million under our existing share repurchase programs. At quarter end, we still had capacity to repurchase as much as an additional $304.5 million of common stock under our existing authorizations. Moving on to Slide 13. Trade and other accounts receivable rose $15.1 million relative to 2022 year-end. Days sales outstanding stood at 60 days, versus 61 days as of 2022 year-end. Inventories fell $200,000 from 2022 year-end; measured on a trailing 12-month basis, inventory turned at 2.4, compared with 2.5 at year-end 2022. Our cash position at quarter end was $959.3 million, compared with $757.2 million at year-end 2022. Our net debt to capital ratio was 4.8%, compared with 9% at year-end 2022. Beyond cash and anticipated cash flow from operations, on September 12 we entered into a 5-year, $900 million multicurrency revolving credit facility, which amends and restates our prior $800 million facility. At quarter end, no amounts were outstanding under the credit facility, and no commercial paper borrowings were outstanding. That wraps up my comments on our third quarter performance. I'll now give a brief review of a few outlook items for the rest of 2023. We expect capital expenditures to come in at approximately $100 million. Furthermore, we currently expect our full year 2023 effective income tax rate to be approximately 23%. I'll now hand the call back to Nick for his closing thoughts. Nick?
Nick Pinchuk
executiveThank you, Aldo. So that wraps up our third quarter. It's a period I've often described as potentially erratic and not necessarily a reliable signal of where things are heading — largely on account of the SFC along with holiday periods across the globe. That said, the past 3 months struck me as encouraging. We absorbed some notable headwinds: the conflict in Ukraine, plus political and economic ambiguity in China. We met those difficulties head-on and emerged with unmistakable advancement. Records everywhere you look, extending the climb — it kept extending the climb we've been making for quite a while. We've discussed capacity limitations at length. Initially within the industrial segment, and afterward in the Tools Group, driven by growing appetite for what we offer; and during this quarter, the strength of those expansions becomes obvious — powered by a talented, seasoned crew, supported by decisive edges in product and brand, and deployed in markets that matter and hold up even when things get tough. The Industrial division is doing exactly what we projected, delivering obvious double-digit growth and robust profitability for three consecutive quarters now that additional capacity is up and running; and the Tools Group is beginning to show the earliest signs of that capacity push, finishing the quarter with excellent momentum and a considerable increase in overall profitability. Over at RS&I, capacity isn't the constraint; instead we're carving out a solid, profitable foothold in the repair shop through software capabilities such as our Mitchell 1 system, diagnostic breakthroughs like our award-winning ZEUS+ handheld, and straightforward solutions to the difficulties of repair complexity throughout the undercar equipment range, sustaining the sharp upward path in that wide product space. It was a quarter that gave us reason for optimism. The numbers show it. C&I sales climbed 3.2% organically. External sales proved especially strong, with major gains in essential industries despite uncertainty in Europe and Asia. OI margin came in at 15.9%, a rise of 120 basis points to reach 70 — once more, 70 basis points lost to unfavorable currency. Tools Group sales grew organically by 3.7%, near target, leaving the quarter with momentum as the expansion begins to pay off and an OI margin of 22%, 140 basis points higher. Again, that's while absorbing 50 basis points of currency headwinds. And at RS&I, sales increased 3.1%, OI increased 10%, and OI margins hit 24.3%, an improvement of 130 points. All of this lifted the corporation. Sales rose 4.7% organically. On the whole, Opco operating margins reached 21.2%, an increase of 90 basis points — 90 basis points against 50 basis points of adverse currency. And every bit of that produced an EPS of $4.51, higher than any comparable figure. We're confident that, thanks to our decisive and expanding product advantages, the Snap-on Value Creation process, customer connection, and innovation, we'll keep — we will keep introducing strong new products every single day. Our brand advantages: Snap-on stays the visible emblem of pride and dignity that working men and women find in their trade. Everyone recognizes that. Plus, we have strengths when it comes to personnel — our team is seasoned by battle and highly skilled, individuals who anticipate climbing higher even when circumstances are tough; with those strengths magnified through investments in capacity and deployed toward markets that are durable and essential, we hold the view that our company will climb along a distinct and ongoing upward path for the rest of this year, into 2024, and far past that. Now, prior to handing the call to the operator, I want to address our franchises and associates directly. My friends; this quarter was an encouraging one. It was a difficult one amid considerable turbulence, and it came about because of your tireless commitment and labor. For what was achieved in our third quarter, brought about through your efforts, you have my congratulations. For the remarkable skill you apply daily in every circumstance, you have my admiration. And for the steadfast assurance you continually show and plainly reveal regarding what lies ahead for our company and our team, you have my gratitude. Now I will hand the call to the operator. Operator?
Patrick Buckley
analystPatrick Buckley here, filling in for Bret. During the prior quarter, you folks pointed to demand outpacing capacity across a handful of tools product lines. Has that mix mismatch evened out over the last three months? Or are a few of those patterns still hanging around?
Nick Pinchuk
executiveYeah. Well, as I believe — what I attempted to convey during my remarks was that things improved as the quarter progressed. We began capturing some of the benefit from the capacity expansions; those efforts are starting to show their initial impact. So a portion of that did begin to even out, yet it remains present; we anticipate those capacity expansions will keep assisting us moving forward. But it's essentially the same situation. Whenever you face these capacity constraints, and they were mostly within hand tools and, inside the Tools Group, they were hand tools along with tools storage. As the quarter progressed, you observe them loosening somewhat, though they aren't at the level we'd like. They will get there, though.
Patrick Buckley
analystUnderstood, that helps. Now, when it comes to the dealerships you serve as OEM customers, in that RS&I segment you mentioned certain softness and unevenness. Is the broader demand fairly solid there? Or what precisely is behind it?
Nick Pinchuk
executiveSo on a relative basis, demand is fairly solid. What I'd say is that these operations — what's meant by this operation is that these are programs and projects that OEMs either author or commission, mainly to handle the quirks of an evolving landscape or a brand-new vehicle. Perhaps a fresh trailer hitch adjustment is required since something wasn't foreseen, or a separate tool is needed to remove the wiring harness, or possibly to back vehicle charging stations at dealerships since electric vehicles are arriving, or perhaps for a specialized tool — and the way it works is the OEM requests that we configure the product and afterward distribute it to its dealerships; and that has been trending upward. Even so, it is uneven. It's a sizable project; that's a sizable project, that's a sizable project; so should you receive x number of them in a single quarter and then x minus 1 in a different quarter, that puts a bit of pressure on things; in this case, the EQS business declined somewhat, I believe low single digits or roughly that; however, last year it had climbed enormously tied to the futility of new models entering the market. And so this is down somewhat compared to a fairly strong position. So it merely mirrors a bit of unevenness across the surface of that operation, and that generated some offset for RS&I.
Gary Prestopino
analystMorning, everybody. Nick, could you — you mentioned that the business coming in from the conference was solid. I mean, might you provide us with some sort of measurement to frame that? I mean, was it among the...
Nick Pinchuk
executiveAbsolutely. We've risen by a mid-single-digit amount. So this is the pleasant — we appreciate this sort of situation since it demonstrates that we will continue expanding within the type of range we anticipate for growth. It was elevated — throughout the pandemic it had climbed to even greater levels at certain times. But on the whole, mid-single-digit expansion is quite favorable for us. We're rather heartened by that notion. Still, you need to keep in mind, Gary, as you're quite aware, these items amount to nothing more than orders. They are orders. They — they don't automatically translate into sales. And those orders are distributed across 6 months or 7 months. So linking them to any specific thing is difficult. That said, when orders climb by a mid-single-digit amount, it beats getting poked in the eye with a sharp stick, it's fine. We're fairly happy about that.
Gary Prestopino
analystAll right. Okay. So then, one thing I wanted to ask — as time passes and the average vehicle in that car park ages, you're also seeing many more older vehicles loaded with technology. At that stage, where do you put your focus? Does it move, more or less, away from hand tools toward greater diagnostics — specialized diagnostics — for those vehicles? Or is it simply — perhaps you could offer us some direction on that.
Nick Pinchuk
executiveWell, here's the thing — you'd imagine that would make sense. I certainly would. Without question, it places a bigger emphasis on electronics, software, and other extremely advanced items — calibrations, that sort of thing — which are today's buzzwords compared with what they once were. You'll observe a steady rise in that spending, along with the capability, value, revenue, and profit that this stream produces. That said, I'm not convinced hand tools are going to shrink. Since, looking back, we recall this industry during the '90s, when a car's electronic trouble codes numbered in the dozens. Today they number in the tens of thousands, yet demand for hand tools keeps climbing. So I'd say — I doubt hand tools will diminish. My belief is that software, electronics, diagnostics, and calibration will grow. That's my take; incidentally, hand tools carry fairly good margins. Still, they're tougher to forecast. Take, as I attempted to show in the explanations I gave regarding the diesel plug, the glow plug socket, and the triple flex function ratchet. Honestly, these come about after the vehicles are on the road, once you notice the difficulties technicians face, and then you make them possible. Consequently, I expect they'll stay in demand going forward. We've witnessed no reduction in that demand, even while we've seen expansion in the electronics and calibration side of the business.
Gary Prestopino
analystAll right. Then I've got something to ask Aldo, specifically about the tax rate, Aldo. I believe you mentioned — and I don't have those figures with me right now — but on earlier calls, you said this year's tax rate would land somewhere between 23% and 24%. At this point you've brought it down to 23%. Still, to reach a rate like that across the whole year, Q4 is going to need to come in above 24%. Is that how I should understand it?
Aldo Pagliari
executiveIt's going to be close to — I believe when you add everything up, our rate for the year so far sits at roughly 22.9%, or thereabouts. So we're right around that area, Gary; I'd say Q4 will land close to that as well. We saw some positive results from bringing down our state taxes, plus a few other things, and that's what helped Q3; Q3 of last year was actually even stronger; so at times you get this kind of fluctuation happening now and then. But 23% is roughly the correct figure. My expectation is we'll reach that over this coming full year.
Nick Pinchuk
executiveYeah. If you actually compare this year to last year, taxes hit us by about $0.06, right?
Aldo Pagliari
executiveFor quarter one, it was negative.
Nick Pinchuk
executiveIt was negative, correct. So despite that, we were still 8.9% higher, even accounting for the $0.37, and even with that 6% effect.
David MacGregor
analystSo I suppose my question was — I simply wanted to inquire regarding the UAW strikes, plus whatever impact or fallout you might be observing throughout the company. You've already mentioned the dealership side of things, describing it as lumpy, but I'm curious whether perhaps the OEMs instructed you to slow things down there while they deal with the strike problems, and then whether there was any knock-on effect for the tools segment too.
Nick Pinchuk
executiveYeah. That's a tricky one — obviously, forecasting is difficult. It's a bit like throwing darts while blindfolded, honestly. Still, here's how I see it. To begin with, let me fix one small thing: the dealership business on its own wasn't down. The OEM programs did decline somewhat, yet they remained at fairly elevated levels by historical standards despite pulling back a bit compared with a year earlier. So at this stage, we haven't witnessed anything I'd describe as a major retreat in the OEM programs. That said, regarding the UAW strike — I once was employed by the automakers themselves, and those companies are cash-hungry beasts, they burn through money incredibly fast. Therefore it's possible that, should the strike continue for a longer period, you might observe some erosion in that business, specifically in that particular business. As for when that effect would land, I can't say for certain, since they may not scrap programs — they could simply postpone a few, or they might actually scrap upcoming programs. It isn't clear how that would unfold, yet there's a chance it could occur. As for the dealerships on their own, I'm not necessarily — I believe the impact on them can't be known, because at times when they can't obtain new cars, they simply shift greater focus toward repair and parts. That therefore works in our favor. At other times they hunker down and cut back; though on the whole, I think they typically lean toward — more toward repair parts when new cars aren't available, and that isn't too bad. So I view those as the 2 scenarios that could unfold.
David MacGregor
analystAll right, and returning to what you mentioned before, the SFC order book rose by five percent, or by a mid-single-digit rate, compared with the same period a year earlier...
Nick Pinchuk
executiveFive percent is not what I said — mid-single is what I said...
David MacGregor
analystNo, you said mid-single.
Nick Pinchuk
executiveMid-single digit.
David MacGregor
analystMid-single-digit — that was my error. I apologize. I'm simply attempting to square that with a few of the capacity difficulties you're up against, which are obviously getting better, yet it sounds like 4Q will still bring somewhat of a problem. Do you expect a greater portion of the fulfillment tied to that order growth to be directed into 4Q, and perhaps compared with a year-ago basis, versus what you'd have experienced 12 months back when no such obstacle existed; and because of that, could you possibly see a bit of added growth stemming from that concentration in 4Q?
Nick Pinchuk
executiveI suppose. I'm not sure. I think — I don't entirely grasp precisely what your question was getting at, David. But — but here's the thing — the way I look at it is capacity keeps improving. Even once you've got the building finished, you'll begin installing the machines, and there's a ramp-up period. You don't have this working yet; so you sort of get this beginning to assist you. The initial product coming off the line helps, but just how much help it delivers isn't so clear. I think you'll still find us in the fourth quarter trying to stick handle around the capacity issues, and that's part of what's here, but that stick handling will become more — less complicated; and as a result, we ought to be able to capitalize on the orders. But the timelines, the time constants tied to that, are always rather difficult to forecast. They hinge on your ability to ramp up, which we have considerable faith in, and they hinge on the character of the orders placed against those. I'd just say that going forward, we feel as though we're in a stronger position than when looking recently backward.
David MacGregor
analystThen, could you — this might be one for Aldo — could you address what capacity limits did to margins, plus the added expenses tied to that, during 3Q?
Aldo Pagliari
executiveAs you observed across every line, margin results overall came in quite strong. Certainly, added expenses exist, along with expediting charges and some overtime components that must be spent. Yet simultaneously, thanks to supply chain gains achieved across roughly the last 12 months, our resources have grown, letting us focus on RCI initiatives. So David, though each quarter brings plenty of difficulty, we anticipate meeting the challenge and working to counter those added expenses. That said, some added expenses will indeed arise, though the Tools Group alongside the remaining segments are pursuing ways to counter that.
Nick Pinchuk
executiveI can't help but jump in on this one, honestly. The way I see it, more than 100 basis points of margin gain across each segment — that strikes me as outstanding, truly. So that is — to my mind, it looks quite strong; so I believe that ought to serve us well down the road, though I can't say exactly how everything will shake out. We look ahead — as I mentioned, our expectation is that margins keep getting better at all times.
Christopher Glynn
analystThanks. Morning, everyone. Nick, I'm interested — could you say more about what you mentioned regarding bringing new capabilities into the critical industry space? What kind of work are we talking about, and how big is it? What are you actually going after, if you will?
Nick Pinchuk
executiveWell, here's the thing — to start, I'd point out that we still haven't reached the full limit of that initial capacity expansion. As a quick aside, if you'd like to see that expansion for yourself, it's on, I believe, the final page of this year's annual report; you can find it right there. It's a fairly substantial piece of equipment, so we're still learning how to get the most out of it. That's just how these things go. You begin, things go reasonably well, then you keep improving and improving. So I'd say we still have ground to cover on that front. As for what I mean by adding, we've just brought in a brand-new machine shop dedicated to the critical industries in that area. That involves a specific product that previously had to be sent out to outside suppliers. Those took more time, and we weren't getting them out the door as well as we could. So we made the call to handle it internally ourselves. And we expect that to line up on two fronts — one, we can source more efficiently, which matters a great deal to us; and two, we can be more inventive and truly align with what customers are asking for directly; so that's what I was referring to.
Christopher Glynn
analystGreat. So right now cash is getting close to $1 billion. I don't know what amount you feel fine keeping on hand, but it seems like it will just keep growing unless you speed up some form of spending. So I'm curious how you're viewing that cash position?
Nick Pinchuk
executiveWell, look, here's my take: first off, we're a business where working capital matters a great deal; so when we grow, you generally draw on part of that cash for working capital, even though we're in a period where we — we relied on working capital to protect ourselves from the pandemic's challenges. So a portion of it was released. we examine our dividends closely, and we've paid those each quarter going back to 1939, and I enjoy saying right now that we've never cut it in any quarter since 1939. And so forever is the standard that guides us on dividends. So we'll review that once more. We'll review that. And beyond that there are items such as pension, and there are items such as acquisitions, both of which matter to us. So we have a range of acquisition possibilities that we'll keep evaluating, as I always put it, certain ones are large, certain ones are small. And we aren't hesitant to do a big one; so I sort of appreciate having a war chest available for that, particularly nowadays when interest rates are rather high; and last of all, we consider repurchasing shares when opportunities arise.
Christopher Glynn
analystYes. To build on what we discussed about the pipeline, have you noticed any shifts when it comes to how available or how actionable some of the bigger prospects are?
Nick Pinchuk
executiveI haven't noticed any — I suppose we're seeing somewhat greater availability. Whether actionability has improved at all, I can't say. There's been plenty of talk about that, I think. Every banker you come across, it seems, is eager to bring that subject up. Still, in that respect, I'm not detecting much of a change. One might expect prices to be declining, perhaps as interest rates climb, I'm not sure, yet that isn't what I'm seeing. What we are seeing, though, is somewhat more availability, a bit more availability.
Christopher Glynn
analystAll right. Thanks. This will be my final question. I believe you mentioned the number of technicians has risen by a mid-to-high single-digit rate. My guess is that realizing that upside involves a bit of a delay. Is it reasonable to view that as a forward-looking signal and a growth engine?
Nick Pinchuk
executiveYes, I'd say that's reasonable. Consider this — particularly because an accelerant exists in this situation, Chris. I've held this position for countless years, and throughout the majority of that time, technician growth sat at 1%, 1.1%. That was the whole story. It behaved just like a metronome — 1.1, 1.1, 1.1. Today, though, the increase has reached mid-single digits. As a result, this simply has to arrive and speed up on our end, for two reasons: first, there will be a greater number of technicians. Second, the newcomers must acquire their equipment. Naturally, that equipment acquisition takes various forms. Take, for instance, the possibility that they aren't purchasing the most premium toolboxes immediately; their attention might be on carts — and in fact, had you examined our tool storage segment last quarter, carts were the dominant driver. So we are already witnessing a portion of that impact. Still, they must obtain their tools; and a wonderful aspect of this is that we've invested — I believe the figure is thousands of schools across the nation working to ensure everyone recognizes that the Snap-on brand ranks as the strongest name in repair and to turn students into lifelong Snap-on customers. And I believe we observe that happening as those students enter the marketplace. So the growth is Texas music to our ears.
Scott Stember
analystWhen it comes to the tools segment, could you break down how a few of the subsegments performed — hand tools compared with tool storage, and also diagnostics and power tools?
Nick Pinchuk
executiveSure. Honestly, the standout for this quarter — not this month, this quarter — was hand tools. Sales of hand tools were quite robust during the period. So that came in pretty strong. Diagnostics slipped a bit after 3 solid quarters, and there was no new installation in this case; and power tools declined somewhat since the Stubby wasn't put on sale until following the SFC. So that was truly a late-period occurrence, considering part of the tremendous momentum in that scenario. When you examine the late period, power tools would stand out as a major contributor there, because it sold extremely quickly. As I mentioned, the wait paid off. Yet we showed it at SFC, and crowds gathered around it, but we didn't sell it. Our aim was simply to build more pent-up demand in that scenario. Tool storage came down somewhat, though that was largely a swap of, as I just noted, the carts, which carry lower value per unit compared with the larger units, and they free up a bit more manufacturing space. So that sort of thing is what happened in tool storage. Units were fairly solid, but revenues came in a little lower as a result of the mix.
Scott Stember
analystUnderstood. What about sales off the van compared with into the van?
Nick Pinchuk
executiveWhen it comes to off-the-van sales, those likely tracked — one could say they largely tracked the Tools Group, matching the figures you observed for that group broadly and the uptick toward the close of the quarter. One thing this time around, I believe we encountered quite a few vacations in certain instances, just as tends to happen. That's the reason I describe these quarters as squirly.
Scott Stember
analystSell-through basically matched sell-in.
Nick Pinchuk
executiveAbout the same.
Scott Stember
analystUnderstood. Then one final administrative item. I noticed corporate expense rose by more than $5 million. What caused that?
Nick Pinchuk
executiveStock-based compensation accounted for a big chunk of it. And some of that is, alright, I believe this year performed somewhat better than the prior year beyond just the ordinary baseline, yet also once you string together multiple years of strong results — if you look back at our figures, they keep climbing, climbing, climbing, climbing, climbing, climbing, climbing. You're referring to a sizable amount net of 100 basis point OI margins, and that begins feeding into the long-term incentive too. So you're beginning to observe part of that showing up in that scenario. There are additional items, <<inaudible>>. But that — I think that covers it for government work.
Luke Junk
analystI've got a few questions about margins, and they're focused on the segment level. To start, Nick, when I look back at the Tools Group, a lot has been happening there — material inflation, supply chain issues, and a product mix that keeps shifting. It feels like those factors might calm down as we move into next year. I suppose I'm weighing that against the profitability change in the Tools Group, which has already been a step function. Are there any significant offsets or risks we ought to consider as we head into next year — perhaps price increases returning to normal, rather than simply building on where the tools business stands today with a more typical margin trajectory into 2024?
Nick Pinchuk
executiveNo, I don't — look, I'd say material wasn't a big driver this time around. The Tools Group has largely moved past that. So I doubt you'll see that. I think the Tools Group just isn't a good — incidentally, all — many of the items you brought up, such as product mix and so on, that wasn't — it's been this way every quarter <<inaudible>>. Each quarter is the same. Things never move in just one direction with the Tools Group, so our approach is to offset whatever comes up and keep the overall trend pointed higher. During this period, we landed a solid chunk of business carrying attractive margins. The handful business is performing quite nicely. And by the way, this is exactly why I keep bringing up those two topics together — once you build a relationship with a customer and fix what's troubling them, good things follow. If you can get the glow plugs out in a much shorter time, that's something customers value, and it earns you better margins. It may sound obscure, yet that's precisely the sort of thing that puts money in your pocket. If you hand someone a triple flex ratchet that gives them three ways to work and helps them deal with hard-to-reach spots, they'll hand over money for it — and that sort of thing pays off for us. So, for the most part — I'd say a big factor behind our margins both in this quarter and every quarter has been pretty strong product activity; now, one thing that did take place, and I think it's fair to say this, is that while the pandemic was going on and the supply chain began causing trouble, we had our engineers concentrating to some degree on substitution and pulled them off new chronic capacity. Since there's a limited pool of engineers, a portion of them had been tied up hunting down parts that were actually obtainable so shipments could go out. With that problem now behind us, those engineers can get back to developing new products. That means the whole operation ramps back up to full throttle. So looking ahead, we're feeling fairly optimistic about where this is headed.
Luke Junk
analystThen, as a quick follow-up regarding RS&I, I'm just considering the mix within that segment. Perhaps I'm overanalyzing this—if so, let me know. But take undercar equipment: it has posted strong double-digit expansion for 3 years running, with somewhat slower growth this quarter, rising at a high single-digit rate. I'm just pondering the growth mix between the software operations and undercar equipment, and how much more that software portion might become evident down the road.
Nick Pinchuk
executiveWell, I'm not certain. What I mean is, we would certainly welcome a higher software mix. I believe you will witness that. Software is performing well. Mitchell 1 enjoyed a solid quarter. Mitchell 1 actually had an outstanding quarter. Repair shop owners or managers want this. We're seeing that momentum build. So we believe we have that, along with some excellent new adjustments, and additional ones are on the way. There's the diagnostics business, which—as we progress, I think fresh offerings will propel that operation. And—yet undercar equipment carries lower profitability. But relatively speaking, they are at, I believe, a record high in profitability for them. Thus, when you look year-over-year, you're receiving a positive margin contribution from those folks. So here's what we have—I mean, I think the path ahead is somewhat what you're describing; the path ahead for RS&I involves more software, yet we also believe we can boost the margins in areas such as the equipment business. Because we have been accomplishing that, and they're at a record high right now and climbing. So we view those as the two, I suppose, elements in that scenario. That's my perspective. So I think fairly positive things. But look, RS&I, with solid sales and equipment. With robust sales and equipment, what were the 24.3% up 130 basis points. That's not <<inaudible>>. So they appear capable of sustaining improvement. If you review the results, they keep rising. I think that will persist.
Luke Junk
analystAlright, I'll stop right there. Thanks — that point about equipment margins is useful, Nick.
Sara Verbsky
executiveWe appreciate everyone being with us today. A recording of today's call will be posted before long at snapon.com. As we always do, we thank you for your interest in Snap-on. Have a good day.
Operator
operatorAppreciate it — that wraps up the conference call for today. Thanks to everyone for joining us for today's presentation. At this point you're free to disconnect your lines, and we hope the rest of your day is wonderful.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Snap-on Incorporated transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.
Get the API View API docs →This call discussed
For developers and AI pipelines
Programmatic access to Snap-on Incorporated earnings transcripts and 132,000+ others is available through the
EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments,
full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.
More tools for stock research
OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Snap-on Incorporated or any ticker on your watchlist.
StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.