Snap-on Incorporated (SNA) Earnings Call Transcript & Summary

February 8, 2024

New York Stock Exchange US Industrials Machinery earnings 67 min

Earnings Call Speaker Segments

Sara Verbsky

executive
#1

Thanks, Gary, and good morning, everyone — we appreciate you being here as we review Snap-on's fourth-quarter and full-year results, all of which appear in the press release issued earlier today. Joining us are Snap-on's Chief Executive Officer, Nick Pinchuk, and Snap-on's Chief Financial Officer, Aldo Pagliari. Nick will kick things off by offering his perspective on how we did. After that, Aldo will take you through a more in-depth look at our financial performance. Following Nick's closing remarks, we'll turn the call over to your questions. As always, we've prepared slides to accompany our discussion. These slides can be found in the Downloads tab of the webcast viewer, and they're also available on our site, snapon.com, in the Investors section. A copy of the slides, together with a transcript of today's call, will be kept in the archive on our website. During this call, we may make statements about management's expectations, estimates or beliefs, or otherwise address management's or the company's outlook, plans or projections — those are forward-looking statements, and what actually happens could differ materially from what's said in them. Our SEC filings contain additional information, including the factors that could cause our results to differ materially from those forward-looking statements. To wrap up, I want to note that we're using some non-GAAP financial performance metrics in this deck. These shouldn't be viewed on their own or as a replacement for the equivalent GAAP figures. You can find more details about these metrics in the earnings release we put out today, which is available on our site. So with that out of the way, let me hand things over to Nick Pinchuk. Nick?

Nick Pinchuk

executive
#2

Thanks, Sara. Good morning, everyone. As I always do, I'll begin with the quarter's and the full year's highlights, then give you my read on how our markets did and where things are going. After that, Aldo will take you through a thorough look at the financials. In Q4, the results showed what we regard as still another period of progress. Yet again, we located opportunities and stood our ground against headwinds, and the shape of the mixed landscape moved in the way it typically does. Still, in the end, we once more captured the opportunities and made it through the choppy conditions. In the quarter, sales came to $1,196.6 million — $1.2 billion, which has a nicer ring to it — up 3.5% as reported versus a year ago, once you set aside $9.1 million of favorable foreign currency and $5.5 million from the recently completed Mountz acquisition. Organic sales rose 2.2%. Those figures point to a meaningful favorable trend, demonstrating Snap-on's ability to adjust and to move beyond market disruptions. Now for earnings: opco operating income in the quarter was $257.9 million, and the quarter's OI margin was $21.6 million, better by 10 basis points than a year ago. Over at Financial Services, operating earnings were $67.9 million, up from the $63.9 million recorded a year earlier. Combining what opco produced with what financial services generated, the consolidated margin was 25.2%, also an improvement of 10 basis points. All told, EPS was $4.75, up 7.5% from the $4.42 reported in the same period a year ago. With margins covered, I want to move to the markets and the patterns we pick up through our customer connections — we devote a lot of time to being with customers. From where we sit, automotive repair is still clearly robust. Vehicle OEMs continue to acknowledge the need to update dealer repair shops, outfit those shops, and cope with the surge of new miles and technologies coming into the market. As we prepare for what lies ahead, manufacturers keep urging dealerships to invest in new undercarriage equipment and essential tools so they can manage what's on the way. That's a considerable opportunity, and Snap-on is clearly taking advantage of it. Independent garages are humming as well. The vehicle and repair data, plus the car parks, make that plain. The car park continues to grow and get older — vehicles in it now average over 12 years of age. Cars have become more advanced and tougher to fix, and because of all that, service hours are up, households are paying more for repairs, and wages are rising. The number of technicians is increasing quickly, and shop owners keep making their needs known — they're requesting more technicians, and in even greater numbers than in earlier years. That shows you the repair business underneath is sound. It's flourishing. This reality kept technician sentiment positive even though the financial community warned again and again over recent years and months that a downturn was coming, that a downturn was coming. Still, dollars by themselves don’t tell the whole story. For working folks, money affects just about everything. If you go person by person, confidence comes down to a balance between what’s right around you—the garage we can see—and how you interpret where the world is going. Sometime in the middle of last autumn, our franchisees sensed that balance shifting in an unfavorable way. During the last few weeks, I’ve been on the road and sat down with franchisees nationwide — in Nevada, South Carolina and Wisconsin — and all of them said essentially the same thing. The techs have lots of cash, but because of the bad outside headlines they see every day — what’s happening in Ukraine, the conflict in the Middle East, the disorder at the border, and the uncertainty of the upcoming election — that accumulating weight appears to be pulling the techs’ confidence lower. When that happens, based on patterns we’ve observed in other stretches—and yes, we’ve witnessed this before—our buyers continue buying, although they lean toward items that pay for themselves more quickly. That seems to be what happened as the quarter went on. It showed up from the midpoint through the end of the quarter. So repair remains solid, but the technicians feel anxious about what’s ahead—they still hold a great deal of cash, yet their confidence seems to be wavering. That’s a meaningful shift. Let’s turn now to critical industries. That picture is, clearly, somewhat different. Across that segment, confidence appears plentiful. This is where our commercial and industrial group, or C&I, operates. We continue to see progress. And the quarter’s results reflect that trend. It’s a complicated segment. Many of you already know this, but I’ll say it again to set the context: it’s a complicated segment full of essential taps where failure is very costly. It’s a space that demands precision, functionality and repeatability, all in the toughest environments, across a huge range of applications — from the delicate microscopic world of chip manufacturing to enormous or rugged earthmoving equipment to performance-critical aviation, and even reaching to spaceships. The basic need for customization — yet within that segment, the basic need for customization and precision, both areas where Snap-on is strong, is clearly growing across all those sectors. C&I also is our most geographically dispersed operation, with revenue of $1.1966 billion. And there are significant country-by-country differences, driven by uncertainties in economic and political policies. As a result, we see uneven results in Europe alongside a continuing though gradual recovery in Asia; we also see variation sector to sector, with education, aviation, the military and general industries all posting solid gains, whereas natural resources and heavy-duty are down. But cutting through all that inconsistency is our growing strength in those critical industries. The edge Snap-on possesses in product, in brand, and in people — and during the quarter, those drivers were evident. Looking across the entire company, I'd say conditions in our markets have been uneven — choppy when you move from one stretch to another and from one part of the business to another — but there's opportunity that keeps going. We believe we're well placed to handle what's tough right now, what's tough as of today's close, and whatever might emerge later on. We remain very confident that we have lasting potential — lasting potential in line with the growth rates we run at — and we see a lot of strength to come through, built on our Snap-on value creation processes: safety, quality, customer connection, innovation, and rapid continuous improvement, with customer connection standing out. A major competitive advantage of ours is being situated exactly where the real work gets done, and we design products that simplify the task by aligning with those insights — insights that come to us through applied technology. We've watched this happen over the years; we've watched innovative offerings open a way forward and help you get past any disruption that shows up. And during the quarter, and during the year, our product line kept advancing, just kept growing stronger. And we keep investing in Snap-on value creation to enable that; as a matter of fact, we believe our product line has never been in better shape. Despite all the volatility, 2023 delivered a record count of products hitting a million dollars or more, and we expect to go even higher in 2024. Now moving to the full year, 2023 results came to $1.1966 billion.

Nick Pinchuk

executive
#3

Revenue came in at $4.7302 billion, which was up 5.3% as reported and 5.6% on an organic basis. Opco OI came in above $1 billion. Let me repeat that — $1 billion, and for the first time it hit $1.399 billion, while our opco OI margin was 22% — that 22% was an average gain, a rise of 110 basis points, which is outstanding. We had never hit 22% before, and 110 is a terrific increase; and once you factor in financial services earnings of $270.5 million, the consolidated operating margin for the corporation year came to 25.7%, up 80 basis points. Earnings per share for the year were $18.76, an increase of $1.94, or 11.5%. We think those are solid numbers. Now on to the individual — for the individual operating — now on to the individual operating group. Let's begin with C&I. Reported sales for the C&I group in the quarter were $363.9 million, up $20.7 million, or 6%; that figure includes $5.5 million from the Mountz acquisition, $3.6 million of favorable foreign currency, and our organic sales increase of $11.6 million, or 3.3%. All of that reflects strength in critical industries, partly offset by a decline in automotive power tools. C&I's operating income for the period was $54.1 million; it rose 12.9%, and the OI margin was 14.9%, up 90 basis points, overcoming 50 basis points of headwind tied to negative currency. Once more — once more, in this instance, the gain came from strong expansion in critical industries; and our expanded kitting capacity for complex orders keeps playing a major part in that progress, but big gains were also spurred, as they regularly are, by new product. Innovations such as our recently launched automated tool control, or ATC portal, the newest addition to our unique Snap-on ATC tool control product lineup. It's built at our AutoCrib operations — acquisition operation — an operation acquired recently in California, and the portal substantially extends the reach of our ATC systems. It allows efficient control over a far broader range of device shapes and sizes. Essentially, this portal is a doorway, aligned with a radio frequency identification, or RFID, antenna, and it's usually placed at the entrance to a tool room. Significant assets like hydraulic pumps, portable generators and valuable diagnostic equipment are often kept in common areas in factories or other places and entered into a catalog by attaching an RFID tag. As technicians scan the badges to enter and exit the portal, the system records the devices moving in and out of the secured storage, keeping close track of these critical items, just as the base ATC system keeps track of hand and power tools moving in and out of the tool storage box, but across a much wider set of areas. We expect that the new portal will be a big boost and a great opportunity for C&I in the growing area of tool control, a very important area for us. During Q4, a portion of that promise materialized. So in commercial and industrial, results were uneven—pressure from headwinds existed, yet the direction was unmistakably positive, with strong momentum driven by added capacity and increasingly capable products. Turning now to the Tools Group. The Tools Group's quarter fell short of what we expect; even so, we can see a route ahead as we adapt to shifting conditions. As you'll recall, this is the segment where we serve the techs—the people turning wrenches, tapping touchscreens—and those who seem to be losing confidence because of the macro picture, along with customers who in such times move toward items offering lower payback or faster payback. The fourth quarter shows our franchisees and the Tools Group adjusting to align with that shift, that customer shift. Revenue for the period came to $513.3 million, and that figure included an organic decline of 5.7% versus a year ago. Closer to what we expect, group operating income margin reached 21.6%, a rise of 20 basis points, which absorbed 10 basis points of unfavorable currency, while the gross margin rate climbed 200 basis points. Solid improvements. As the quarter unfolded, franchisees perceived the change and shifted their ordering and selling emphasis to align with customers moving toward lower—toward faster payback products. Snap-on is doing likewise, charting a path ahead, reallocating factory capacity, embracing a smaller ticket marketing approach and introducing innovative or faster payback offerings suited to the environment. Cutting-edge designs, such as our new ratchet, forged at the Elizabeth, Tennessee factory. This latest step in our ratchet family uses a 100-tooth design. We've called it the Synergy series. We think it's a game changer for technicians, a major enhancement that makes repair work considerably simpler. The Synergy is a short payback product delivering an obvious benefit immediately: a head 15% thinner, a handle an inch longer, a 3.5-inch degree swing area, 20% more compact, all of which mean easier access and faster work in tight spaces—including areas like chassis regions on today's vehicles. Synergy's internal mechanisms were redesigned so the primary drag engages with 10 contact points instead of the 7 in the prior design, sharply lowering any chance of slippage and boosting the tool's reliability and quality even under maximum loads. Technicians might be unsure about what lies ahead, but they have faith in the Synergy. They understand with the Synergy—they understand it delivers a quick payback; it's thinner, longer, stronger. And moving forward, we'll extend that new technology—the new 100-tooth technology—across the Snap-on lineup, and we think it will soon be a must-have throughout the industry. Also during the quarter, our Algona, Iowa manufacturing facility produced the new quick payback KRSC2430, a 36-inch deluxe shop cart featuring smooth mobility and a substantial payload. This gives a tech a cost-effective, appealing entry point into the tools, and it also lets them place their instruments right next to the work area, which boosts productivity and removes the time spent walking back and forth to the job. One standout feature: the reversible lid on this cart doubles as a sturdy workbench when opened, splitting into 2 sections and giving you complete, easy reach into the deep 8-inch top compartment beneath it. The unit also comes with a full power strip where techs can charge cordless tools, diagnostic platforms, lights and other electronic devices. The innovative cart is also set up with 2 extra drawers. You've got 2 additional drawers below the sliding top, offering fast access to essential and small items, cutting down on wasted time spent hunting around, plus large drawers for smaller-scale items. That's a frequent issue with competing units. So this really saves the tech time. And just like our top-of-the-line tool storage boxes, technicians can personalize their cart by picking from a range of colors and trims, letting them express their own personal identity across the shop. With the KRSC2430's economical storage, attractive features and convenient mobility, we expect it will hold strong and keep drawing interest in this uncertain environment.

Nick Pinchuk

executive
#4

Also, when we change what we emphasize in our product lineup, the plant side needs adjusting too—we have to grow capacity so it lines up with what customers want. That’s exactly what we’re doing: we’re pivoting toward items that are popular right now, putting more emphasis on faster payback products such as our Flex and Swivel sockets, plus the new long nose pliers and Milwaukee, adding cart welding, removing constraints for our value-oriented storage cart offerings in Algona, and increasing our commitment to Synergy output in Elizabeth, Tennessee. Last, our sales organizations are being assigned to assist franchisees, which gives them extra momentum and frees up more hours to sell faster payback products right off the truck. All right, that covers the Tools Group. Preferences in technology are changing, operations are being reoriented to secure the path ahead, and we’re adjusting products, capacity, and where sales attention goes—capitalizing on what we do best while conditions are unsettled. Turning now to RS&I. The segment’s numbers backed up what we’ve consistently stated: Snap-on is positioned well to serve repair shops, dealers, and independents, and to stay aligned with the rising complexity of the car park. RS&I sales during the quarter came to $450.8 million, an increase of $12.9 million compared with a year ago, and that included an organic sales gain of $8.8 million generated by volume through vehicle OEM programs for new models and platforms, as well as by solid momentum in undercar across both dealerships and independent shops—improvements that helped counter the decline in big-ticket diagnostic items. RS&I operating earnings in the quarter totaled $113.3 million, while operating margin was a still-robust 25.1%, though it slipped 20 basis points, which mirrors the mix moving toward lower-margin undercar and OEM-facing work and the OEM-facing activities. Even so, as with the other segments, RS&I’s progress comes from new products. And the aging car park itself contains varied and constantly changing models. Light-duty trucks and full-size SUVs are larger than before, needing a variety of wheel configurations and sizes somewhere above 100 pounds. And at the recent repair industry SEMA show in Las Vegas, one of our solutions to that problem was showcased prominently. Our new automated armored series wheel balancers, built specifically for high-volume shops that demand precision and reliability, are constructed from tough steel for stronger and more rugged durability. Despite a small, compact footprint, the balancer’s intelligent operating system relies on sonar technologies to automatically measure both the wheel and RIM, removing any need for manual intervention—a major time saver in the shop. And to improve safety, the unit also has heavy-duty pneumatic features for us that place cumbersome tires onto the spindle, so it becomes unnecessary to protect and physically lift or manipulate the heavy assembly, largely preventing the strain. The balancer also offers a high-resolution touch screen, an intuitive interface, and an effective ergonomic design. It’s a strong blend of accuracy, speed, durability, and safety, and the SEMA crowd definitely took notice. So that’s RS&I. Shop repair stays strong. Vehicle complexity keeps increasing, creating abundant opportunities for a great future. The group has abundant opportunities for a great future, and our RS&I team has the products to seize the advantage. So, that wraps up both the quarter and the full year. Looking at the quarter, revenue rose 3.5% on a reported basis and 2.2% organically. Our operating income margin came in at 21.6%, which is a 10 basis point improvement, while earnings per share hit $4.75, a 7.5% increase, all achieved despite the volatile environment. During this period, we saw remarkable strengths in the key sectors — specifically within the critical C&I industries. The Tools Group fell short of our expectations, yet it still showed margin improvement and made a shift to align with changing technician priorities as well as RS&I, which helped both dealerships and independent shops handle the growing complexity of new technologies. For the entire year of 2023, sales totaled $4.7302 billion, marking a 5.6% organic gain, with operating income exceeding $1 billion, up 10.5%, and an operating income margin of 22%, which is 110 basis points higher — 110 basis points, we're pleased with that. Earnings per share were $18.76, an increase of $1.94, or 11.5%. It was yet another positive year. At this point, I'll hand things over to Aldo. Aldo?

Aldo Pagliari

executive
#5

Appreciate that, Nick. If you turn to Slide 6, you can see the consolidated results. Net sales for the quarter came in at $1.1966 billion, up 3.5% from 2022. Inside that figure, organic sales grew 2.2%, favorable foreign currency translation contributed $9.1 million, and acquisitions brought in another $5.5 million in sales. Sales were strong in our critical-industry businesses this quarter, while the automotive repair market presented a mixed picture. Consolidated gross margin landed at 48.3%, compared with 48.5% a year ago, and foreign currency accounted for a 20 basis point drag on that number. We did benefit from lower material and other costs, along with savings from the company's RCI initiatives, but a shift toward a higher mix of businesses carrying lower sales and lower gross margins more than wiped those out. On the expense line, operating costs fell to 26.7% of net sales, a 30 basis point gain versus 27% a year ago. Lower corporate spending and leverage from stronger sales volumes drove most of that, partially offset by higher personnel and other spending. Operating earnings before financial services hit $257.9 million for the quarter, compared with $248 million in 2022. As a percentage of net sales, our operating margin before financial services was 21.6%, including a 20 basis point drag from unfavorable foreign currency, against 21.5% a year earlier. Now for financial services: fourth-quarter 2023 revenue was $97.2 million, versus $88.3 million last year, with operating earnings of $67.9 million compared with $63.9 million in 2022. Consolidated operating earnings for the quarter were $325.8 million, up from $311.9 million a year ago. Operating earnings margin equaled 25.2% of revenues, against 25.1% in 2022. The effective income tax rate in the fourth quarter was 21.4%, versus 22% last year, while our full-year 2023 tax rate came to 22.5%, compared with 22.8% last year. Net earnings were $255.3 million, or $4.75 per diluted share — $16.4 million, or $0.33 per share, above '22 levels, marking a 7.5% year-over-year rise in diluted earnings per share. Now let's look at segment performance for the quarter, starting with the C&I group on Slide 7. Sales totaled $363.9 million, up from $343.2 million a year ago. That $20.7 million gain breaks down this way: organic sales added $11.6 million, or 3.3%; acquisitions contributed $5.5 million; and favorable foreign currency translation made up $3.6 million. Within organic growth, sales to critical-industry customers climbed by a double-digit percentage, partly offset by a double-digit percentage decline in power tools sales. As for critical industries, military demand was strong, and the aviation sector posted solid activity as well. During the quarter, as previously announced, Snap-on acquired Mountz Inc., a leading developer, manufacturer and marketer of high-precision torque tools. This acquisition widens and improves the torque offerings Snap-on provides across many essential industrial uses. Mountz's operating results are now included within the figures we report for the C&I segment. Gross margin for the fourth quarter was 39.2%, an improvement of 150 basis points compared with the 37.7% posted for 2022. The factors pushing that figure higher included increased unit volumes, improved gross margin stemming from pricing moves made in the critical industry segment, savings from RCI programs, and a 30 basis point boost from acquisitions. Offsetting those positives was a 60 basis point hit from currency. Operating expenses as a share of sales increased 60 basis points, reaching 24.3% for the quarter, up from 23.7% in 2022, with most of that rise tied to a 30 basis point effect from acquisitions plus spending on personnel and other items. In the C&I segment, operating earnings totaled $54.1 million, which included a $1.4 million unfavorable currency impact, compared with $47.9 million the prior year. Operating margin was 14.9%, which included 50 basis points of negative currency effects, versus 14% in 2022 — a gain of 90 basis points. Now let's turn to Slide 8. Snap-on Tools Group sales came in at $513.3 million, lower than the $542.7 million recorded a year ago, reflecting a 5.7% organic decrease that was partly offset by $1.6 million of favorable currency translation. That organic decline mirrors a high single-digit drop in the U.S. business, partially offset by a mid-single-digit gain in our international operations. Gross margin climbed 200 basis points, reaching 45.2% this quarter compared with 43.2% a year ago. The main reason is a reduction in sales of products that carry lower gross margins. That covers weaker sales of certain goods for which the Snap-on Tools Group acts as distributor on behalf of our C&I and RS&I groups. As for operating expenses relative to sales, that ratio increased 180 basis points, hitting 23.6% in the current quarter versus 21.8% back in 2022. The chief cause of that rise was the lower sales volume. For the Snap-on Tools Group, operating earnings were $111 million, down from $116.1 million in the same period last year. Operating margin was 21.6%, compared with 21.4% in 2022. Moving now to the RS&I Group, which you'll find on Slide 9: sales were $450.8 million, up from $437.9 million in 2022. That number reflects a 2% organic gain plus $4.1 million in favorable currency translation. Within that organic growth, we saw activity with OEM dealerships rise by a high single-digit percentage, while undercar equipment sales increased by a mid-single-digit rate. Those gains were partly offset by a high single-digit decline in revenues from diagnostic and repair information products sold to independent shop owners and managers. Gross margin was flat versus the prior year, as benefits from lower material and other expenses along with savings generated by RCI programs were offset by increased sales and a greater mix of lower gross margin businesses. When you look at operating costs relative to sales, they climbed by 20 basis points to land at 19.9%, versus 19.7% during the comparable stretch a year earlier, with the main pressure coming from higher people-related and miscellaneous expenses. Over in the RS&I segment, operating earnings totaled $113.3 million, an improvement over the $110.6 million posted in the prior-year window. The operating margin stood at 25.1%, which compares against 25.3% a year ago. Moving along to Slide 10. Revenue from financial services climbed $8.9 million to hit $97.2 million, up from $88.3 million twelve months earlier, largely on the back of growth in the loan portfolio. Operating earnings for financial services reached $67.9 million, compared with $63.9 million in 2022. Costs within financial services went up $4.9 million relative to 2022, and that included an additional $3.9 million tied to greater provisions for credit losses. This year-over-year jump in provisions mirrors both the expansion of the portfolio and a shift back toward what we view as a more typical pre-pandemic provisioning level. For some perspective, our worldwide extended credit portfolio—known as finance receivables—is up 8.5% from the same point last year. At this stage, we observe delinquency numbers and broader portfolio performance remaining stable. Turning to Q4 of 2023 against Q4 of 2022, finance receivables carried an average yield of 17.8% and 17.6%, respectively. Contract receivables across those same fourth quarters of 2023 and 2022 showed average yields of 8.9% and 8.6%, respectively. We originated a total of $33.1 million in loans in the fourth quarter, which is $3.4 million higher—representing a 1.1% increase—than 2022's figure. Let's now turn to Slide 11. At quarter's end, gross financing receivables on our balance sheet came to roughly $2.5 billion, with $2.2 billion of that generated by U.S. operations. For U.S. extended credit, the 60-day plus delinquency rate was 1.8%, climbing from 1.6% in 2022, even though it aligned with the 2019 pre-pandemic level; on a sequential basis, that rate increased 30 basis points, mirroring the seasonal rise we normally experience going from the third to the fourth quarter.

Aldo Pagliari

executive
#6

When we look at extended credit or finance receivables, net losses over the trailing 12 months came to $50.4 million, equal to 2.59% of outstandings at the close of the quarter. That's versus 2.51% as reported at the close of the prior quarter. Now let's move to Slide 12. Cash generated by operating activities during the quarter totaled $296.9 million, amounting to 114% of net earnings, versus $210.6 million a year ago. The gain relative to the fourth quarter of 2022 mainly reflects smaller year-over-year growth in working investment, which featured an inventory reduction in 2023, along with stronger net earnings. Net cash consumed by investing activities totaled $104.6 million, which comprised $42.6 million for acquisitions, net additions to finance receivables of $42.2 million, and capital expenditures of $21.1 million. Net cash consumed by financing activities totaled $149 million, which comprised cash dividends of $98 million plus the buyback of 217,000 shares of common stock for $60.9 million under the share repurchase program we already have in place. At year-end, roughly $22.9 million of common stock remained available for repurchase under our existing authorizations. Moving to Slide 13. Trade and other accounts receivable rose $29.6 million versus 2022 year-end. Days sales outstanding came in at 60 days, versus 61 days at 2022 year-end. Inventories fell $27.2 million versus 2022 year-end. And measured on a trailing 12-month basis, inventory turns were 2.3% versus 2.5% at year-end 2022. Our cash position at year-end stood at $1.15 billion, versus $757.2 million a year in 2022. Our net debt to capital ratio was 3.8%, versus 9% a at year-end 2022. Beyond cash and anticipated cash flow from operations, we have over $900 million available through our credit facilities. At year-end, nothing was outstanding under the credit facility, and no commercial paper borrowings were outstanding. That wraps up my comments on our fourth quarter performance, and I'll quickly go over a few outlook items for 2024. We anticipate capital expenditures in the range of $100 million to $110 million; furthermore, we currently expect our full year 2024 effective income tax rate in a range of 22% to 23%. I'll now hand the call back to Nick for his closing thoughts. Nick?

Nick Pinchuk

executive
#7

Appreciate that, Aldo. Now for Snap-on's results in Q4 and across the entire year. Differences by region, a customer viewpoint that keeps shifting, mounting uncertainty around the macro picture — none of that stopped Snap-on, because we know how to turn drawbacks into advantages, seize the openings in front of us, and stay on the positive, upward path we've now shown across many quarters and a great many years. During the quarter, technicians' outlook did shift. As we pivoted, volume in the Tools Group alone fell short of what we expect, yet the tools team softened the blow through favorable mix and RCI, which pushed OI margins 20 basis points higher while gross margin climbed 200 basis points. With repair shop owners and managers, the narrative looked a bit different; they see the case for upgrading, and RS&I boosted its participation in OEM programs and added to its undercar equipment gains, especially within the growing collision space; last, C&I delivered yet another quarter where its importance to the corporation grew, with critical industries up double digits and another margin leap, hitting new and meaningful heights; taken together, that produced fourth quarter progress despite some hefty headwinds. Sales rose 3.5% as reported, 2.2% organically. OI margins came in at 21.6%, up 10 basis points, and EPS reached $4.75, a 7.5% increase — all of it progress at a moment when not everything sat where we wanted. Still, I'd call the clear headline of this period the full year organic sales growth of 5.6% for the corporation. Opco OI margin gained 110 basis points, one more meaningful step in a long stretch of improvement, arriving at 22% for the first time, while EPS hit $18.76, higher against every comparison. Underpinning that were notable results from the Tools Group, which didn't enjoy the calmest waters yet still posted an OI margin of 23.6%, 150 basis points better. At RS&I, organic sales climbed 6.7% with an OI margin of 24.3%, 70 basis points higher from an already strong base; and at C&I, against a difficult landscape, we grew 4.2% as reported and 5% organically, with an OI margin of 15.5%, up 140 basis points even with 50 basis points of negative currency. Maybe the largest story of all, though, is how the critical industry business has emerged, posting strong double-digit growth in each of the 4 quarters and proving we truly can carry the Snap-on brand beyond the garage at considerable margins. To us, this quarter and this year show that Snap-on has multiple run rates for progress. Even when one segment faces difficulty, we keep moving ahead, achieving clear and ongoing advancement powered by the rest of the enterprise. Because of that, our position and our future give us encouragement. We're confident that thanks to our product advantages — everyone knows we understand work and we make tasks easier. When it comes to our brand, wherever you look, throughout the workforce, the Snap-on logo appears and is mentioned with immense pride. And within our personnel — a squad that has been through the fire — who discover the path ahead and higher despite obstacles, the outcomes from 2023 confirm this. And we hold the belief that, powered by these strengths, Snap-on is going to prevail, we are going to accomplish and are going to progress, carrying on the favorable momentum across all of 2024 and far past that; now, prior to handing the call to the operator, I want to speak to our franchisees and associates. I realize every one of them is tuned in. I have conveyed today, with faith and assurance, our present circumstances and the road ahead. I do this chiefly — but I do this chiefly since I am aware of the ability and the caliber shown repeatedly by each of you. For your efforts and for crafting what we have achieved, accept my congratulations. For the talents and vitality you deliver to our company daily, accept my admiration. And for the dedication you unfailingly show toward what our shared business will become, accept my gratitude. At this point I will hand the call to the operator. Operator?

Luke Junk

analyst
#8

Nick, to begin with, I was hoping you might elaborate a bit. I realize you already touched on some of this during the prepared remarks, but could you go further into Snap-on's key growth drivers within the Tools Group as we head into 2024, really independent of whatever the market hands you? And if you shift direction forcefully enough, do you believe the tools business can expand this year?

Nick Pinchuk

executive
#9

Yes, I believe we can. I mean, we've already shown it; we did it. We managed it during the pandemic period and as we emerged from it, when confidence was still somewhat there in tools. Looking at the initial 4 quarters following the pandemic, it was largely driven by items with shorter payback. So building a solid business from that is possible. We also achieved it toward the close of the financial recession. So we believe that capability exists. We're basically — as you might put it, what we observed after the SFC was everyone operating as usual, energized, placing orders across a broad product mix. Then in late October and November, our franchisees began seeing things shift somewhat, and they wanted to pivot since they'd been through this before, so they wanted to change direction. That's exactly what we're doing. We believe we have excellent offerings in hand tools, diagnostics, tool storage carts, and perhaps some of the entry-level tool storage boxes, such as the classic series; so our focus will go there; that doesn't mean we'll drop the higher-priced items, like perhaps TRITON and others in diagnostics or — which we consider very strong, or — or our boxes. But our emphasis will move; and it's worth discussing capacity, Luke, because keep in mind, we were already somewhat increasing capacity, and we're working hard to grow it further. So in this scenario, what you aim to do is deploy that added capacity in a redirected way; so we truly have the volumes where we believe sales are happening now. So we feel fairly confident about that. Our product lineup is solid. We have a good — as I mentioned, product drives everything; we have a fantastic range of hand tools on the way; we have new tool boxes, diagnostics, power tools, all of which will benefit us, we think. So the path ahead is, first, keep pushing the products, ensure we can genuinely deliver them. And then number three, as we always do, is to assist the franchisees with selling by freeing up more of their time to sell, and perhaps in this situation it can occasionally take somewhat longer; that's the reason we're sending our field people out there to bring a bit more energy and time to the selling process itself. So we view it as a sensible pivot. This is — once again, it isn't our first rodeo. It isn't the Tools Group's first rodeo; so we think, all right, things have shifted somewhat. We understand how to react.

Luke Junk

analyst
#10

Then a follow-up, I suppose, would concern that change in how mechanics feel that you noticed around the middle of autumn. How might that affect the willingness to extend credit here, and as you followed either loan originations or other patterns in the book, I'm thinking more about the demand side, Nick?

Nick Pinchuk

executive
#11

Wow, yeah, in that scenario you'd likely observe reduced use of credit. What I mean is, originations — my sense is they'll be down 1% within the United States during the quarter. So yeah, I think you witness that sort of pattern; and if you look back and examine our figures, for instance, as we emerged from COVID, suppose, in quarter 3 and 4 of '20 and the first second quarter of 2021, you'll notice that sort of phenomenon. So that might be what happens. Of course, it's still early for this. Our folks have a feel for it. Well, the positive aspect here is our folks had that feel immediately. And having that feel, they altered their words that create a bit of pressure on a factory, because when you modify the orders, it causes the capacity to contract somewhat. So you get those sorts of things; so I think you might observe a slight shift away from that. Now I think this fits perfectly with everything. I do believe, I've stated it often that there exists a sort of bifurcated economy, that there's a financial economy, the sorts of people that I mentioned in my — my talk that — my remarks that we're discussing the recession is coming, the recession is coming and the people are saying we're going to have a soft landing now. But the people at the grassroot level hold a different view of the world. And if you check the Wall Street Journal, the front page say and the paper edition, there's an article saying just this. Actually, I encountered a bunch of franchisees, and I encountered a huge number of people in the factories and in garages in places like Conway and Louisville and Elizabeth in Tennessee and Milwaukee. So and they all kind of say the same thing. They got jobs; they got the cash coming in. But every day they get up and get bad news for breakfast; and you start to wonder about what's going to happen. So it's not that things are bad today but people worry about how things are going to happen and what's going to happen in the future; and I think all of us looking at the events might say that's true.

Luke Junk

analyst
#12

All right. Perhaps one last thing I'd ask. This may be directed at Aldo. I was just curious about what took place with the car tools segment, particularly during this quarter — when we examine the intersegment figures, it appears there may have been a fairly significant step down. I'm simply attempting to square what you observed regarding order patterns against how you view the underlying momentum in power tools. Could there have been, in effect, a one-time tweak to orders meant to reset inventory levels on the bans within power tools? Is that the correct way to think about it?

Aldo Pagliari

executive
#13

In certain respects, an additional buffer stock sits in the middle, since the Tools Group kept its own inventory levels. So you're correct — it's just that the Tools Group didn't need to purchase as heavily in power tools and diagnostics this quarter; that doesn't automatically imply everything passes straight through, one for one, into demand, given that you've got inventories sitting in between — both the inventory at demand itself and the inventory held by the Tools Group. Yet the softer sales from C&I and from RS&I into the Tools Group do mirror, in fact, largely power tools plus diagnostic-related products.

Nick Pinchuk

executive
#14

Yeah, absolutely, I'd say so — what you're observing is a phenomenon, like Aldo mentioned, there's some adjustment going on there. And if you examine — if you really take a close look at C&I, you'll notice they actually delivered a strong quarter with their traditional customers. But here's what occurs in the power tools business: our new CT9038 launched in 18 volt, it performed really well, and then this happened. And it continued selling — however, the pricier items within power tools, such as the 18 volts, sort of fell away and customers leaned toward wanting the 14.4 volt. Our supply chains run a bit longer for that. We weren't able to supply all of it. So that's the kind of situation you get. But at the Tools Group level, power tools aren't down, particularly by any remarkable amount. It's mainly a matter of the split between the Tools Group and C&I.

Patrick Buckley

analyst
#15

Patrick Buckley here, filling in for Bret. Could you expand a little more on pricing against units in the Tools Group? And when you look forward, are pricing moves being considered? Or is the emphasis more on promoting the tools with shorter payback?

Nick Pinchuk

executive
#16

No. When it comes to pricing, normally — apart from inflationary periods, those unusual stretches of high inflation that all of us have lived through fairly recently — we achieve 30 to 40 basis points of pricing, roughly that. The bulk of our improvement comes from RCI and new product, and those carry their own margins. New products deliver our margins. We have no plans to alter that strategy. A significant pricing change isn't something we're going to pursue down the road; the real issue here is shorter payback against longer payback. Think about it this way — take something as basic as a tool storage unit. Okay, you can purchase a big epic, and wow, those are fantastic. Customers adore them. They bring folks over and show off their box, saying, this is my dream, yet that isn't a fast payback. That's a payback that takes longer. You must put in a lot of time and extract efficiency from that unit's size and its features before you reach payback. But if you buy yourself a cart, you can go from your work area out into the shop — especially in certain independent shops, out into the shop yard or anywhere around the shop; and right there that hands you instant time savings; so that's the sort of thing I mean, that shift in thinking. Will this item pay for itself immediately, return my money right away. Wrenches do exactly that, especially something like the Synergy I mentioned earlier, which represents a leap forward in reliability and access and swing arc and makes the jobs simpler and lets you beat the flat rate sooner; so those are the sorts of things we're placing our bets on. We've watched it succeed previously. So I believe the positive aspect here is that Tools Group saw it begin to gain traction.

Patrick Buckley

analyst
#17

Understood, that's useful. Was there anything worth highlighting regarding the corporate expense line, since Q4 appeared to drop below the run rate we'd observed over the past few years?

Aldo Pagliari

executive
#18

During the quarter, our spending was lower, especially on legal expenses. We secured a favorable settlement on one matter. That let us bring down what we spent in the quarter. Even so, corporate expenses' run rate is proceeding as usual.

Nick Pinchuk

executive
#19

All told, that comes to roughly $113 million. Across the year, the figure stands at $113 million, which is an increase of $5 million to $6 million compared with a year earlier.

Aldo Pagliari

executive
#20

$113 million versus $1.08 million.

Nick Pinchuk

executive
#21

Yes, yes.

Scott Stember

analyst
#22

Scott, is there any way you could break down the various subsegments inside tools — hand tools, power tools — clearly it sounds as though power tools declined, but what about the storage units and similar items?

Nick Pinchuk

executive
#23

There isn't much positive information to share. Diagnostics was the largest factor heading lower; that's where the decline showed up, and we offer multiple lines of diagnostics, with the most recently launched being the SOLUS — it sits at the low end of — I don't want to call it low end, it's the least expensive model in our lineup; and its performance during the quarter fell short of what we'd hoped for in our circumstances. What also dropped was ZEUS, the flagship product, along with the next tier down, TRITON. ZEUS came to market in last year's fourth quarter, so those year-over-year comparisons apply. Still, that was the single biggest drag. Beyond that, I believe tool storage actually rose a bit, though entirely on account of carts — mostly carts — while shop and tech both fell. Hand tools also declined somewhat. Yet if you examine it, one element — one of the elements that pushed the margins, and I think this is the key takeaway there, Scott — what caused margin gains in the Tools Group even with reduced volume was that the goods they produce, the carts made at Algona, the tool storage products and the hand tools, accounted for a larger share of their sales than they did a year ago — in the previous year. That produced a considerably better mix, since for hand tools — what the tools group sells in hand tools and tool storage, they capture both the distribution margin and the manufacturer margin, whereas on items such as diagnostics, power tools and shop tech, they capture only the distribution margin. There's quite a substantial gap between those two. So depending on how that mix plays out, you can wind up with fairly good or fairly bad results.

Scott Stember

analyst
#24

So moving ahead, clearly your attention is on things that pay back faster. That would mean hand tools, right? You'll start ramping that up somewhat more?

Nick Pinchuk

executive
#25

Here's how we'd put it. There are — Scott, we prefer to believe we could locate faster payback items than all others. Hand tools, clearly — frequently, I ought to say frequently, our fast payback. Technicians are able to spot fast payback. Some iterations of tool storage, like I've mentioned, especially the carts, which are usually considerably less costly and work better since they're sort of an add-on choice for a big box. Or else someone lacks the means for a lot and simply wants to obtain a Snap-on tool storage somehow at a price they can manage. Then the entry-level portion of that lineup, the classic series, which we're aiming to have regarding programs on the way, scheduled for February and March. So that's how it would be. Diagnostics, everything there leans toward larger ticket items. Thus there are — the SOLUS exists at the entry level, plus we have some — we'll launch a new diagnostic at some moment in the year, generating interest. Yet the smaller ticket items sit only at the very bottom of diagnostics. After that, power tools may include what I'd rather not call big ticket items, though the 18 volts cost somewhat more. 14.4 volt is far more affordable, and you usually get a highly targeted use case, whereas the 18 volt leans toward wider uses to deliver that power anywhere, while the 18 — the 14 volts usually mean saying, I've got this issue in this specific chassis region of the car I'm looking at, so I'll go with that 14.4 volt. So that likewise tends to pay back fast; those are the sorts of things you notice.

Scott Stember

analyst
#26

Understood. Then, for a final item, looking at the larger picture — you mentioned that the broader market and the fundamental conditions appear quite robust. You aren't detecting any red flags regarding the businesses themselves, or demand. I mean, O'Reilly came out last night, and they indicated their professional segment grew by double digits; so I simply want to confirm we're not — this isn't some early warning signal that the underlying business...

Nick Pinchuk

executive
#27

I don't believe that's the case. I mean, I think everyone claims things are going well. I mean, I don't know. To begin with, I've got 2 responses to that. First is the metrics. When you examine the BOL data, everything there appears favorable. I mean, miles driven have risen in that. It's a long-term matter. But spending on — household spending for repair climbed 4% compared to a year ago. That's quite a solid figure. The count of techs rose 4.5%, i.e., it used to be 1%; now they're expanding at 4.5%. Technician wages have gone up 7%. So those sorts of things are favorable, and the car park, obviously, continues to expand, and so they keep adding to it. And the auto industry, though this doesn't matter too much, is beginning to recover, and they're still introducing those new technologies. So all of that seems, from a quantitative standpoint, to be positive. Now the Bureau labor data can lag, so I don't know, and folks have doubts about that. But then when you head out for the windshield survey and you speak with not only the people — our franchisees who are there daily — but also with ordinary working people, they feel cash is flowing for them. They won't claim they're cash rich, but they are. And so I think things appear good at present; and I don't anticipate this shifting.

Scott Stember

analyst
#28

Understood. And to nail down one more thing regarding a point you made before, it wouldn't shock you to witness the Tools Group getting back to organic growth in positive territory?

Nick Pinchuk

executive
#29

No, guidance isn't something we provide. That said, I believe I mentioned roughly 4 times during my comments that they were not at standard. Our expectation is that they will grow. Should they fail to grow, they would fall short of what we expect.

David MacGregor

analyst
#30

I'll kick things off by following up on where the previous questions ended. It seems like hand tools and storage might be performing somewhat stronger on a relative basis. Yet that's also the area where you've been putting in more capacity at Elizabeth, Milwaukee, and Algona. Is the improvement there simply a matter of finally having extra capacity and being able to work down some of that backlog? Or could there be a stronger underlying demand picture in those categories?

Nick Pinchuk

executive
#31

Given the circumstances, that's a hard one to answer — I mean, I suppose I'm not certain. Still, here's how I see it: I'm fairly confident our results are better partly because during the quarter we had some room to shift toward items with quicker payback in those areas. That's about the best way I can put it. What I can also say, David, is that this is the lament of an operations person — when you believe you'll have promotions coming off your factory lines, and then out of nowhere your customers tell you never mind, we'd rather go in a different direction, that tends to generate a great deal of what I'd call inefficiency. You have to adapt accordingly, so I don't believe we captured the complete benefit from those capacity additions — we'd hoped to realize it from the capacity expansions during Q4, but those shifts forced us to simply make the most of what had been added. That's one piece of it — one element in this whole picture. True, the backlog for tool storage, at least a portion of it, came down. We did work off some of that, though backlog remains in those areas. So it's a complex answer, I'd say. Some of that may apply. Conversely, we weren't able to deliver as much. We couldn't have worked off as much as we would have — if we'd had the full — if we'd been capable of rolling things out according to the production plans we'd set coming out of the SFC.

David MacGregor

analyst
#32

Alright, I have a few more things to ask, Nick and Aldo. Regarding the trucks, I'd really like to hear your perspective — given that organic growth declined 5.7%, what would you estimate the truck sell-through figure to be?

Nick Pinchuk

executive
#33

I have a fairly good idea of what that number was, and during the quarter it came in above that, and across the year it typically runs higher as well; ultimately, though, this has a way of working itself out over time. That said, in Q4, trucks did not decline. They remained negative, yes, but nowhere near the extent seen in the Tools Group.

David MacGregor

analyst
#34

You mean a decline in the low single digits?

Nick Pinchuk

executive
#35

Yeah, that's right. I mean, perhaps — it's hard to say for certain — but they've cleared out certain items; so delivery plays a role in this — say you move toward one specific product, we do keep stock of it, yet the thing is at times that item isn't available and the factory has to be adjusted, and at other times we weren't able to get them what they asked for.

David MacGregor

analyst
#36

If I could, I'd like to turn to credit for a moment. Aldo, typically you provide the split of originations across finance receivables and credit receivables. Could you kindly give us that breakdown once more this quarter?

Aldo Pagliari

executive
#37

Originations for EC receivables declined, and contract receivables more than made up for that drop. Much like what happened with the Tools Group's results, EC originations within the United States fell by a greater amount than those we observed abroad. In fact, EC originations were up on an international basis. So that provides a sense of how those pieces combine.

David MacGregor

analyst
#38

All right; and inside those origination figures, I suppose, is it possible for you to separate out merchandise from franchisees switching RA and EC?

Aldo Pagliari

executive
#39

In fact, I was happy to report, I realize what you're getting at, David, in fact, during the quarter, there's a smaller amount than the usual blend of those things we refer to as transfers, RA transfers, in which items get moved out of revolving accounts and into EC. That impact is in fact smaller. Yet when you look at the entire year, it lines up very well with our expectations. Therefore, we haven't seen any indication of franchisees leaning on the credit company to fund their operations by shifting things out of their revolving accounts into, I believe that's the point you're driving at.

David MacGregor

analyst
#40

Right. So, would you say there might be a chance here — I mean, your credit portfolio is extremely high quality. Nobody has ever questioned that, in my view. That is definitely how we see it. Do you think an opportunity exists to ease up somewhat on credit standards so that demand could be reenergized?

Nick Pinchuk

executive
#41

No.

David MacGregor

analyst
#42

Nick, that was a really clean response.

Nick Pinchuk

executive
#43

Well, assuming that was actually me.

Aldo Pagliari

executive
#44

When you consider what we've been saying, there's somewhat of a confidence gap among consumers when it comes to major purchases. My view isn't that the answer lies in lowering the interest rate you'd charge on those in order to force a transaction. So that's not where we're headed — cutting prices typically isn't how we operate. That's not to say we won't potentially develop inventive offers, package deals, and similar approaches. Still, my sense is that slashing prices isn't the path to success.

David MacGregor

analyst
#45

So how should we view the regional kickoff events? Could you walk us through what you expect in the first half from those regional kickoffs...

Nick Pinchuk

executive
#46

Normally, our practice is to address the kickoffs during the first quarter call. That said, broadly speaking — and we attempted to move the kickoff very late — our method for kickoffs differed this time around. This issue became apparent to us. Our focus was on items with quicker payback, and those appeared to perform fairly well. After that, we set up a somewhat larger program during February and March, reasoning that spreading the kickoffs across additional months would let us make improved adjustments given what's currently happening. That's essentially how we handled the kickoff. I attended one in Las Vegas and — right, typically they fly me to the Deadwood South — North Dakota location. On this occasion, Las Vegas was where I went. The Canadian team members were present with us; that appeared to work out fine; their attitude seemed upbeat. The franchisees don't appear intimidated by any of this. They simply share their observations.

David MacGregor

analyst
#47

All right. For my final question, let's talk about competition and how things are shifting. Your fleet size on the road has stayed pretty consistent for a good many years now. I suppose the overall mix may include slightly more company-owned trucks than franchise-owned ones at this point. Yet your rivals keep adding more vehicles out there. You get the sense this is beginning to have some effect. Do you think perhaps you gave up a bit of share this quarter relative to some competitors?

Nick Pinchuk

executive
#48

I'm not sure. I'd rather not — I've never been comfortable discussing share. I never brought up share back when our figures were soaring, and I'm not bringing it up today. You might believe that's happening, but I doubt it. Here's the thing — we've got — we have — I don't believe — I think our roughly 3,400 franchisees mean we've got the whole market covered. So one could say certain spots could be facing rivals where previously they weren't. However, a handful of places, David, face no rivals at all. So occasionally things get rough, right — someone ranks 1 or 2 or 3. A different competitor will set up shop nearby. Yet that person, our person in that area, has been serving customers already, and the newcomer has their own rivals, which might actually generate additional business. But I never hear franchisees mention it. Why — you'd reasonably assume that would be true, and we ponder it constantly, and I raise the question constantly, yet they hardly ever mention it; as a matter of fact, never.

David MacGregor

analyst
#49

Has there been any shift when it comes to how often franchisees drop out?

Nick Pinchuk

executive
#50

Not really — that has stayed fairly steady, essentially unchanged during the quarter. So regarding franchisees, within just that quarter, we observed more — I believe we observed more of the longer-tenured than the tooth guys departing during the quarter, which is a curious phenomenon. But that was — it's merely a kind of anecdotal observation about it. I'm not — not certain that could change anything, but I don't think that's something we worry about specifically when it comes to the everyday competitive dynamics.

Sara Verbsky

executive
#51

We appreciate everyone being here with us right now. Shortly, a recording of this session can be accessed at snapon.com. As we always do, we value the attention you show toward Snap-on. Have a good day.

Operator

operator
#52

That brings us to the end of this call. We appreciate everyone joining us for today's presentation. You're welcome to log off at this time.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Snap-on Incorporated transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.

Get the API View API docs →

This call discussed

For developers and AI pipelines

Programmatic access to Snap-on Incorporated earnings transcripts and 132,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Snap-on Incorporated or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.