Snap-on Incorporated (SNA) Earnings Call Transcript & Summary

February 6, 2025

New York Stock Exchange US Industrials Machinery earnings 52 min

Earnings Call Speaker Segments

Sara Verbsky

executive
#1

Alan, thank you, and hello everyone. We appreciate you joining us today to review how Snap-on performed in the fourth quarter and across the entire year — everything can be found in the press release issued earlier this morning. On the line with us are Nick Pinchuk, who serves as Snap-on's Chief Executive Officer, and Aldo Pagliari, Snap-on's Chief Financial Officer. Nick will kick things off by giving his perspective on how we did. Then Aldo will provide a closer examination of our financial numbers. After Nick shares some final remarks, we'll take your questions. We've got slides ready to accompany what we'll be talking about, same as we normally do. Those can be accessed through the Downloads tab inside the webcast viewer, and you'll also find them over at snap-on.com under the Investor section. A recording of this call plus a written transcript will both be kept on our site for future reference. When we say things today about what management expects, estimates, or believes — or anything touching on outlook, plans, or projections for management or the company — those count as forward-looking statements, and what actually happens could end up differing substantially from what gets said in them. You can locate further details, along with the things that might make our results come out substantially different from what those forward-looking statements suggest, inside our SEC filings. To wrap up, you'll find non-GAAP performance metrics in this presentation, and those shouldn't be viewed on their own or used in place of the equivalent GAAP figures. Our earnings release put out today, available on our site, contains further details about those metrics. Having said that, I'll hand things over now to Nick Pinchuk. Nick?

Nick Pinchuk

executive
#2

Appreciate that, Sarah. Morning, everyone. So I'll kick things off by walking through what stood out in Q4. I want to share how I see the results, the conditions out in the market, and how far we've come. We made a lot of headway. Then, like always, Aldo takes over and digs deeper into the financial details. We're living through fascinating times, full of unpredictability, yet Snap-on was designed to come out on top no matter how choppy things get. This isn't the first time we've been through something like this. Our task is to face it, to beat it, and to keep moving forward with conviction — conviction about how sturdy our market is, conviction about how powerful our strategic and tactical edges are, and conviction about the wisdom and drive of our steady, talented team. Every bit of that showed up in the figures, so let me give them to you. Total sales for the quarter came in at $1,198.7 million, a rise of 0.2%, on both a reported and an organic basis, which put us back in positive territory. Profitability came in strong, with gross margins reaching 49.7%, which is 140 basis points higher, while the operating margin hit 22.1%, up 50 basis points compared with 2023 — a record for any fourth quarter. Earnings from financial services totaled $66.7 million for the quarter, a decrease of $1.2 million, which brought the consolidated margin, counting both Opco and financial services, to 25.5%, better by 30 basis points. EPS for the quarter landed at $4.82, which is $0.07 above the $4.75 we posted a year ago. These results reflect widespread improvement that pushed past the uncertainty. We saw yet another stretch of sequential gains, driven by record results from the commercial and industrial C&I, from the commercial industrial C&I Group, and from repair system information, or the RS&I group, along with the Tools Group pulling off a successful pivot to align with what techs want and continuing to close the distance from last year; it was a heartening display of advantage, of resilience, and of capability. But before anything else, let's talk about the markets. In our view, the vehicle repair market remains strong, with a steady flow of new tools and data to handle the growing complexity of today's vehicles. Repair shops right now, whether dealerships or independents, have to grapple with a growing set of difficulties: various powertrains, EVs, plug-in hybrids, super hybrids, advanced combustion engines, sophisticated digital systems, and a broad array of autonomous operations, devices such as adaptive cruise control, lane departure warnings, collision avoidance sensors, self-parking features; it keeps going and going, and that list only grows longer; and technicians are expected to repair all of it, handling a bewildering range of procedures. It's intimidating, yet this is exactly where Snap-on excels: scanning, diagnosing, guiding, and fixing, empowering the techs, making tough jobs simpler. Add in an aging car park that now averages 12.6 years and holds a multitude of technology generations, every one of them needing repair, which drives even more complexity and calls for even more tools and more data, and that adds up to even more opportunity. We love it. There are multiple segments within vehicle repair, so we'll begin by zeroing in on the shops — the dealerships and the independent ones — as they adapt to the intricacy that frequently calls for items such as fresh lifting equipment capable of handling EVs' greater weight, tire changers built for bigger wheel dimensions, software packages for running the shops, for arranging parts information into tidy catalogs, for booking repairs and customer-facing interfaces, and for steering technicians through the most advanced or complex jobs. That's the space where RS&I plays; for our lineup of undercar and collision gear, it's a target-rich environment, and for our software and data offerings, it's an expanding market. Snap-on holds a strong position thanks to our inventive hardware, yet above all thanks to our exclusive, all-encompassing database — billions of revealing records — advantages that, in our view, establish Snap-on as the data king of vehicle repair, a standing that I believe you'll see was once more confirmed by our quarter, through our climbing gains in that space; let's now turn to the techs, the people laboring in the bays, beneath the hood, turning wrenches, tapping touchscreens, applying their expertise, and performing the repairs themselves. Once again, this quarter brought chances to sit down with numerous franchisees and the customers they serve, and every one of them voiced excitement about vehicle repair's strength, and outside data backs up that perspective — miles driven rising, the car park growing older, household spending on auto repair up, household spending on auto repairs up, hours worked climbing, and finest of all, technician wages going up. Not long ago I visited a garage, and the service manager declared to me forcefully that the work simply keeps pouring in. We need additional techs. That tracks. Growing complexity translates to additional time devoted to every repair and additional trained professionals required to satisfy demand and keep the shops thriving. So plainly the techs sit in a favorable spot, yet that doesn't shield them from the macro uncertainty surrounding them: continuing wars, immigration disagreements, stubborn inflation; and even though the election now sits in the rear mirror and the incoming team might concentrate more on business expansion, there's a rapid fire of fresh initiatives, tariff bombs, actions that switch on and off, looming shake-ups, and foreign ventures of numerous kinds. As of now, it's difficult not to feel uncertain about what lies ahead. So the franchisees, they mirror that uncertainty; amid the turbulence, technicians keep favoring items with quick payback, the ones that simplify work and reduce labor times immediately, items such as hand tools and mid-range diagnostics that get paid off across shorter cycles. They stay lukewarm on big ticket, longer payback items such as tool storage. The Tools Group keeps up its pivot, aiming its engineering, its manufacturing, and its selling to align with the movement in those customer preferences. In spite of certain difficulties in automotive, automotive repair continues to be strong, and we think we're pivoting effectively to seize greater advantage. Let's now discuss critical industries. C&I pulls Snap-on beyond the garage, addressing Tesla-related challenges that call for precision, durability, reliability, and repeatability, all carried out in some of the toughest and most punishing settings, ranging from clean rooms to mine pits to assembly lines to spacecraft construction. This market, let me tell you, holds a lot of promise. Our work in critical industries kept climbing across several sectors: aviation, natural resources, and general industry each posted solid gains. This arena also stands as our largest international footprint, and conditions there were varied — in Europe, the UK and Southern Europe rose, Germany fell. Over in Asia Pacific, China softened, yet we saw increases in Japan and South East Asia despite adverse currency effects. Plus improvements in South Korea too. I'll note that in that context, even with the currency working against us. So C&I certainly faces hurdles across both geographies and segments, but we've achieved meaningful progress and genuinely see sizable opportunities ahead, drawing on our strengths in product, in our brand, in our people. And I believe once you look at the results, you recognize it's paying off. So the auto repair and critical industries market both stay favorable, and we're prepared and well-positioned to move forward on those extremely broad runways. At the same time, it's evident to us, and I trust it's evident to you, that additional potential exists along our runways for improvement; and as we go forward, we're strengthened by our Snap-on Value Creation Processes: safety, quality, customer protection, innovation, Rapid Continuous Improvement, and Rapid Continuous Improvement, or RCI.

Nick Pinchuk

executive
#3

Their significance has reached an unprecedented level, aiding us in navigating the instability and reshaping how we withstand challenges. Customer connection and innovation hold particular importance. That represents our distinctive edge: being present alongside working men and women, watching every job, aligning what we learn with the technology we have mastered, and creating new, innovative products that simplify work. It's a substantial strength, and our team is dedicated to continuing to apply it resolutely; now let's discuss the operating groups. We'll begin with C&I. Fourth-quarter revenue hit a record $379.2 million. That's up $15.3 million versus a year ago, and the total includes $2.1 million from acquisitions and a $1 million hit from foreign currency, with organic growth of 3.9% on the strength of wins with customers and in critical industries. Customized kits posted the strongest performance, filling growing need for solutions tailored to particular jobs. Our specialty torque business was another obvious bright spot. Precision matters more with each passing day, and with our wide range of torque products, C&I is positioned exactly where it needs to be — the figures make that plain. C&I delivered $63.5 million in operating income this quarter. That's a $9.4 million increase, or 17.4%, versus 2023. Group gross margin rose 180 basis points, while operating margin came in at 16.7% — also a 180 basis point gain. Wowza. C&I simply keeps improving. It says a lot about how well we can roll out of the garage. Within C&I, specialty torque is genuinely making strides. Torque is hot now, and Snap-on is at the party with a growing array of new products like our heavy-duty cordless torque multiplier. The name we've given this product is the CTM800. Its torque output ranges between 160 foot-pounds at the low end and 800 foot-pounds at the top, which is exactly the capability required to handle the wide-ranging demands found in mining, oil and gas, rail, and heavy-duty applications. This tool came into existence thanks to our growth in the torque category. By merging the efficiency of a Norbar gear design with the compact functioning of a Snap-on power tool, we created this broad range, which makes applying high torque levels both simple and secure, while also allowing for straightforward reach into confined spaces. This new unit also comes with a control for the transducer that was built specifically to deliver exactly the right amount of force — that's a real step forward — and it gains from the cooling system we've developed for advanced power tools, which gives it far greater durability. Within one compact tool, the CTM 800 torque delivers a great deal: gains in flexibility, protection, reach, longevity, and accuracy; it covers every one of those, and in situations where the work is critical, it's already proving very popular. C&I sales are higher, with tailored kits and precision torque climbing to unprecedented levels, all accompanied by record profitability — a peak in profitability with plenty of additional space to expand and get better. Moving now to the Tools Group. Sales for the quarter came to $506.6 million, a decline, yet it shows we're making headway in closing the distance relative to 2023. We've definitely made progress, though there's still some uncertainty. The Tools Group posted operating income of $106.9 million — that's $4.1 million below where we landed in 2023 — and operating margin came in at 21.1%. Despite that volatility, we remain dedicated to our van network, keeping it robust and continuing to invest in it. Our profitability has also drawn some attention from the media recently. The Franchise Business Review, in its latest franchise satisfaction rankings, recognized us, placing Snap-on in the top 50 franchises for an 18th consecutive year. And in Entrepreneur magazine's 2024 ranking of top franchises for veterans, we came in at number one among all franchisees. Elite Franchise magazine put Snap-on at number one among franchises in that country — an accolade we've now held for three consecutive years. Rankings like these, naturally, confirm the fundamental strengths of both our individual franchisees and our van operation as a whole. Without a consistent stream of new products — developed out of our strong customer relationships, where insight and experience get transformed into innovation — none of that would have happened, and it's what gives us a real advantage in the fast-changing realm of vehicle repair. One of our newest items is a special hex driver, manufactured in Milwaukee, designed expressly for today's vehicles equipped with advanced driver assistance systems, adaptive cruise control being one example. Standing in the bay next to the techs doing the real repairs, we observed how hard it was to align the radar sensors that make that autonomous control possible, that make adaptive cruise control possible. The job was tough. To get to the work area, techs pulled off bumpers and grilles, tearing apart the car's front end, an exercise that consumed a lot of time, added no value, and carried the risk of harming nearby parts and components, all simply to open the path for the repair that would eventually happen. That insight led us to create the NDM35, a hex driver measuring 3.5 millimeters, featuring a shaft of five and 3/4 inches that is extra long and provides better reach, so it gets past obstacles without difficulty, allowing necessary adjustments while everything stays assembled. This newly released tool also features our Snap-on Instinct ergonomic handle design, which gives users enhanced control and makes the task easier to perform with the precision those extremely sensitive radar brackets require. With our NDM35, repairs turn out faster, easier, and more profitable, and technicians have noticed. Also in the quarter, we rolled out a fresh hand tool lineup that grew from one more customer connection. After watching people struggle to get any leverage from the open side of a typical combination wrench, we found the box side did a great job grabbing a fastener inside a cramped engine bay. It simply slides right on. But any time you needed serious force and had to hold the wrench at the opposite far end, things got really painful, because that open end digs into your palm. So to solve that problem, our engineers developed the all-new XDSGM. This line pairs a box end and a low-profile head with a ratchet handle that has a soft grip, so technicians get the reach they require while still being able to put maximum force in comfortably thanks to the ergonomically contoured cushion grip handle — loosening bolts without flinching from pain or having the tool slide off while under load. I bring up the new XDSGM here because it stands as a textbook fast payback item, a straightforward yet potent innovation that leaves work safer, quicker, and simpler, and technicians have adored it, turning this wrench into one of our million-dollar hit products in the short period since its launch a few months back. So that covers the Tools Group. Staying connected with our customer base, bringing new and innovative offerings to market, running operations that continue to adapt, delivering the fast-payback items customers are asking for, and narrowing that gap even more — all while keeping a strong network intact through choppy conditions. Now shifting to RS&I. Volume for the fourth quarter was $456.6 million, up 1.6% on an organic basis. We recorded gains across OEM dealerships and independent shop owners in diagnostic platforms and repair information products, although softer activity in undercar equipment partially canceled that out. RS&I operating earnings in the quarter were $121.4 million, up $8.1 million, or 7.1%. Gross margins improved 200 basis points, and the operating margin came in at a strong 26.6%, 150 basis points higher than the prior year and an all-time record. That record shows growth in software, which is excellent. It comes with an extra long 5.75 inch shaft.

Nick Pinchuk

executive
#4

This also demonstrates how solid and widespread our RCI performance has been — across the vast majority of RS&I operations, both software and hardware sides, margins climbed by significantly more than 100 basis points. Boom, shack-a-lack. That's exactly the sort of outcome we celebrate, since it sends our profitability flying. Now, shifting to profitability again, our Mitchell 1 specialty software unit, which serves independent repair shops, kept up its amazing momentum, growing its database — big data — which now holds 3 billion repair records along with 500 million data points, a potent proprietary edge that powers our intelligent diagnostic platform, talking straight to vehicles, decoding trouble codes, delivering intricate interactive wiring diagrams, sophisticated inductive models, pinpointing the fault, and walking technicians through fixing it, all at unmatched speed, productivity, and profitability. Of course, we can't discuss that without bringing up the Apollo Plus, the latest addition to the intelligent diagnostic family, launched during the latter part of the third quarter, and it keeps excelling, outdoing earlier generations and, crucially, growing the count of software subscriptions. It's simple, speedy, and clever. And for today's world, right now, it gives a tech the fastest payback and access to the power of Snap-on Intelligent Diagnostics; we figured it would be a hit, and indeed it is. During the quarter as well, the Undercar Equipment Division brought out the new V4400 Commander wheel alignment machine; it transforms things for shops thanks to its distinctive flexibility. Plenty of shops lack room, and they skip alignments entirely. They farm them out. Today's garages require new equipment to keep pace with that sort of gear, to keep pace with vehicles growing more complex. Take alignment, for instance — it's never mattered more. But how do you squeeze in the new units without an expensive build-out? And often, the buildings are already landlocked, and owners can't give up a daily repair bay for alignment work that's periodic yet essential and lucrative. The solution is the V4400, a flexible, intelligent, modular system. Its design is innovative, with a control center contained in a small toolbox that links wirelessly to a pair of twin independent mobile towers holding a refined four camera setup. Those pieces store away easily when not in use and can be put together anywhere in the shop fast, providing alignment capability whenever needed and on demand, no matter the layout — whether your shop is short or wide or deep or narrow, it makes no difference. Our proprietary software, built around our four camera systems, allows for a very fast setup. So getting it ready is quite simple and speedy. No shop is flawless. Our system additionally removes flaws automatically, such as unlevel lifts or uneven floors, guaranteeing an accurate, straight-as-an-arrow alignment. The V4400 aligner is agile, flexible, fast, and intelligent, and it opens the door to profitable alignment at many more shops. This is an excellent offering, and we continue pushing hard to strengthen RS&I's standing among those who own and manage repair shops, bringing them additional new items, every one of which comes out of our value creation processes. We have faith that this approach wins, and the fourth-quarter figures confirm it. So that covers the quarter. Revenue rose 0.2%, returning to par. Opco's operating margin came in at 22.1%, a gain of 50 basis points and a fresh record for any fourth quarter. The Tools Group slipped, yet the shortfall is shrinking. The pivot is delivering. At RS&I, operating margin reached 26.6%, climbing 150 basis points. That marks yet another peak for a group whose margins were already lofty. C&I operating earnings climbed 17.4%. Its operating margin was 16.7%, 180 basis points higher and likewise a record. Resilience, balance, advantage, and results. This was a quarter that gave us encouragement, and with that I'll hand things over to Aldo.

Aldo Pagliari

executive
#5

Aldo. Thanks, Nick. On slide six, you'll see how we performed on a consolidated basis in Q4. Sales for the quarter reached $1,198.7 million, which is slightly above the $1,196.6 million figure from the same period last year — that translates into an organic increase of $2 million. Continued strength in our business with critical industry customers, plus positive results among repair shop owners and managers, was enough to offset somewhat weaker activity in the franchise van network. On a consolidated basis, gross margin was 49.7%, which represents a 140 basis point improvement over the 48.3% recorded a year ago. The drivers there were stronger sales, a greater mix of higher gross margin businesses, and the advantages we're seeing from the company's RCI initiatives. When we compare operating expenses to net sales, they rose 90 basis points, reaching 27.6%. That's up from 26.7% in 2023, and the primary driver was an increase in corporate and other operating costs. For the quarter, operating earnings before financial services came in at $265.2 million, up against $257.9 million in 2023. If we look at that relative to net sales, our operating margin before financial services stood at 22.1%, an improvement of 50 basis points over the 21.6% figure we reported a year ago. Turning to financial services, revenue for the fourth quarter was $100.5 million, compared with $97.2 million a year ago, and operating earnings there were $66.7 million, down from $67.9 million in 2023. All told, consolidated operating earnings were $331.9 million, compared with $325.8 million a year ago. If you look at operating earnings as a share of revenue, that margin increased 30 basis points, reaching 25.5% for 2024. Turning to our effective income tax rate, it was 22.5% in the fourth quarter, up from 21.4% during the same period last year. We posted net earnings of $258.1 million, which compares with $255.3 million in 2023, while net earnings per diluted share for the quarter totaled $4.82, against $4.75 per diluted share one year earlier. Now let's turn to how our segments performed during the quarter. Starting with C&I, which you'll find on slide seven. Sales reached $379.2 million, up from $363.9 million a year ago, driven by a 3.9% organic sales gain plus $2.1 million in sales from acquisitions, with $1 million of unfavorable foreign currency translation partially offsetting those gains. Most of that natural uptick comes from stronger revenue tied to buyers in critical industries, and within that, specialty torque posted a high single-digit gain. Beyond the larger torque product volumes, our critical industries saw encouraging momentum in aviation and general industries during the quarter. For Q4, gross margin landed at 41%, which is 180 basis points better than the 39.2% recorded in 2023. The main forces behind that were greater sales volumes, higher gross margin critical industry sectors, and cost savings generated by RCI initiatives. Operating expenses as a share of sales stood at 24.3% for the quarter, matching last year's figure. Within the C&I segment, operating earnings reached $63.5 million, versus $54.1 million in the prior-year period. Our operating margin came in at 16.7%, which is 180 basis points better than the 14.9% we posted in 2023. Let's turn to slide eight. Over in the Snap-on Tools group, sales reached $506.6 million, down from $513.3 million during the same period last year. That reflects a 1.4% decline in organic sales, plus $600,000 in favorable foreign currency translation. The organic decrease was driven by a low single-digit dip in the U.S. business, which was partly offset by a mid-single-digit gain internationally. And once again this quarter, we believe that continued attenuation, combined with a relatively modest year-over-year sales decline in the U.S., mobile network really demonstrates just how resilient this business is, especially with the environment still uncertain. Our gross margin declined by 60 basis points this quarter, landing at 44.6%, compared with 45.2% during the same period last year. The main drivers were reduced volumes along with a larger mix of lower-margin products being sold. When we look at operating expenses as a percentage of sales, that figure improved by 10 basis points, registering 23.5% this quarter versus 23.6% in 2023. For the Snap-on Tools group, operating earnings came in at $106.9 million, down from $111 million the prior year. Operating margin stood at 21.1%, compared with 21.6% in 2023. Turning now to the RS&I group on slide nine: sales totaled $456.6 million, up from $450.8 million in 2023. That reflects an organic sales gain of 1.6%, which was partly offset by $1.5 million in unfavorable foreign currency translation. The organic increase was driven by a mid-single-digit uptick in business with OEM dealerships, plus a low single-digit improvement in revenue from diagnostic and repair information products sold to independent shop owners and managers — growth that got a boost from rolling out our new Apollo Plus handheld diagnostic platform. Those positive results were enough to overcome a low single-digit drop in undercar equipment sales. On gross margin, we saw a 200 basis point improvement, climbing to 47% versus 45% in the prior year, primarily due to stronger sales of products carrying higher gross margins, among them a better mix of software and gains from RCI initiatives. When looking at operating expenses as a share of sales, that figure went up 50 basis points, hitting 20.4% compared with 19.9% in 2023, mostly on account of increased personnel costs and other expenses. Within the RS&I group, operating earnings came in at $121.4 million, compared with $113.3 million during the same period last year. Operating margin was up 150 basis points, reaching 26.6%, up from 25.1% a year ago; let's move to slide 10. Financial services revenue increased by $3.3 million, a gain of 3.4%, hitting $100.5 million, up from $97.2 million the prior year. Operating earnings for financial services totaled $66.7 million, compared with $67.9 million in 2023. Expenses in financial services were $4.5 million higher than 2023 levels, and that includes $4.4 million in added provisions for credit losses. When you look at expenses relative to the average services portfolio — the financial services portfolio — they represented 1.3% this quarter, versus 1.2% a year ago. Looking at the last three months of both 2024 and 2023, finance receivables brought in average yields of 17.7% and 17.8%, respectively, while contract receivables averaged 9.1% and 8.9%. Loan originations for the fourth quarter totaled $285.1 million, which was down $18 million, or 5.9%, compared with 2023, and that figure includes a 5.8% drop in extended credit originations. That decline in extended credit originations is largely due to weaker sales of big ticket items with longer payback periods. Turning now to slide 11. On our balance sheet at year-end, gross financing receivables stand at roughly $2.5 billion, and $2.2 billion of that comes from our U.S. operation. When it comes to extended credit or finance receivables in the U.S., the 60-day plus delinquency rate stands at 2%, which is 20 basis points higher than what we saw in the fourth quarter of 2023. Looking at trailing 12-month net losses across the entire extended credit portfolio, that figure came to $66.3 million, which worked out to 3.32% of outstandings at year-end. Although both delinquencies and net losses have been moving higher, we feel these portfolio performance metrics are still fairly balanced given where the current environment stands. Moving now to slide 12 to discuss the quarter. Cash rose by $47.2 million, versus a $42.2 million increase in last year's fourth quarter. Operating activities generated $293.5 million in cash this quarter, equal to 111% of net earnings. Investing activities consumed $40.2 million in net cash, driven primarily by $26.2 million in net additions to finance receivables and $18.1 million in capital expenditures. Financing activities used $201.5 million in net cash, a figure that includes $112.3 million paid out as cash dividends plus the buyback of 315,000 common shares for $112.5 million through our existing share repurchase programs. As the year closed, our existing authorizations left room to repurchase up to another $429.4 million of common stock. Moving to slide 13, trade and other accounts receivable finished $24.3 million higher than at the end of 2023. DSO landed at 62 days, which compares with 60 days when 2023 ended. Relative to where inventories stood at the close of 2023, they dropped by $62.5 million, and looking at the trailing 12-month figure, turns came to 2.4 versus 2.3 at the end of 2023. Cash at year-end totaled $1,360.5 million, up against the $1,001.5 million we had when 2023 concluded. On top of the cash we already hold and the operating cash flow we expect to generate, more than $900 million remains accessible through our credit facilities, and throughout the year nothing was drawn down or left owing under that facility, and similarly no commercial paper was issued or left outstanding at any point during the year. That covers everything I wanted to say regarding how we performed in the fourth quarter. Let me briefly walk through a handful of guidance points for 2025. On the corporate expense side, our present assumption is that costs for every quarter of 2025 will come in pretty close to what we saw in the fourth quarter of 2024 — about $27 million each quarter. Beyond that, we expect to take on roughly $6 million per quarter on a pre-tax basis in 2025 from higher non-service pension costs, mostly because of greater amortization of actuarial losses. You'll see these non-cash charges reported beneath operating earnings, within other income and expense net on the statement of earnings. We're looking at capital expenditures of roughly $100 million, and for the full year 2025, we presently expect our effective income tax rate to land somewhere between 22% and 23%. And finally, when 2025 comes around, there will be 53 weeks of operating results in our fiscal year, with that additional week occurring at the close of the fourth quarter. This occurs once every five or six years, and looking back, it hasn't materially impacted total revenues or net earnings for either the full year or the fourth quarter. With that, I'd like to turn it over to Nick for some closing comments. Nick.

Nick Pinchuk

executive
#6

All right, thank you, Aldo. So, looking at our fourth quarter: how we advanced despite uncertainty. Markets are still strong. Repair spending is higher, technician count is higher, wages have risen, the car park keeps getting older, and vehicles keep getting more complex. Even so, uncertainty persists, driven by a macro environment we can't predict. Still, we moved forward against that headwind. The Tools Group showed resilience, with the pivot working and the gap getting smaller. And the balance and breadth of what we do came through in how C&I and RS&I performed — each delivered a solid quarter with outstanding profitability, so resilience, balance, and progress are stamped across these results. In the Tools Group, organic sales fell 1.4%, yet we kept making progress and kept the network strong. At C&I, organic sales rose 3.9%. OI margins reached 16.7%, a gain of 180 basis points and another high. We saw meaningful sales and profit improvement in custom kits and precision torque, which proves we can take the Snap-on brand beyond the garage successfully and very profitably. And lastly, RS&I: sales increased 1.6%. OI margins were 26.6%, up 150 basis points, which is another record, all powered by strong, promising quarters in software and committed RCI. Together, that produced sales of $198.7 million, a 0.2% increase. Adjusted for return to positive territory, total gross margin climbed 140 basis points to 49.7%, while OI margin came in at 22.1%, up 50 basis points, setting yet another record. This quarter encourages us, and so do our prospects ahead, even with uncertainty that continues. Our markets, we believe, will stay resilient and robust, since the critical tasks that define them are essential. We believe we have not merely held onto but have grown our substantial advantages in product, in brand, and in people, even while we moved through the turbulence. We believe our Snap-on Value Creation processes truly deliver value daily, day after day. We believe our talented team is genuinely a difference maker — battle-tested, and able to use advantage to consistently produce positive outcomes and overcome obstacles. This has occurred again and again, and all of us have seen it. We believe all of these strengths will keep our enterprise advancing, extending and continuing its positive trajectory through 2025 and for many years afterward. Before I hand the call to the operator, I want to address our franchisees and associates directly. I know many of you are listening. I've talked today about how special our enterprise is: resilient, capable, determined, drawing progress out of challenge. You are the main authors of that. For succeeding in moving our company forward, prevailing in turbulence, and proceeding with confidence, you have my congratulations. For the capability and skill you bring each day on behalf of our team, you have my admiration; and for your unwavering dedication to and strong belief in the future of our corporation, you have my thanks; now I'll turn the call over to the operator. Operator.

Scott Stember

analyst
#7

Morning, everyone, and I appreciate you answering my questions. Hello, Scott. Regarding tools, I'm attempting to clarify how near we might be to, I suppose, a positive turn. Could you perhaps discuss how confident folks are at the shop level? I'm aware you mentioned it, I believe, remains elevated, yet I suppose their confidence is high while cash is tight. Has that situation actually regressed in any way? And here's the second part of that.

Nick Pinchuk

executive
#8

I don't believe it has regressed. See, here's how I view it. A few weeks back, I visited a shop, and recently I spoke with some franchisees, plus I chatted with other techs in different regions of the country, and I also talked with franchisees across the nation, and it goes something like this. I believe folks feel quite sure that vehicle repair remains strong due to everything I covered regarding complexity and technology. You look at the Bureau of Labor Statistics figures. Practically everyone is saying, "We require additional techs. I have plenty of work. I cannot handle it. Just try to get your car fixed, and you'll understand what I'm saying," and then you deal with the ambiguity. One possibility might have been, I think, that once the election concluded and matters progressed, perhaps the, I suppose, expressed favorable stance of the present team regarding business, and especially regarding working people. I mean, they recently said things such as it being technical education month, and we will discover routes to alternative routes to higher education that will deliver genuine skills for genuine careers; and we will ensure technology serves Americans, rather than Americans serving technology, things along those lines. So that's wonderful news for the techs; yet conversely, they observe all these efforts. Each day you wake up, and you must read the newspaper about what's happening in Washington, and you encounter terms such as Panama and Greenland and Gaza and all of that. Like I mentioned in the remarks, no one has any idea what's coming; so you sort of get this sense that they're thinking, "Do you know what it's like? It resembles being on Space Mountain at Disney World." You board Space Mountain, you get into a car, and you're in darkness, and the car moves left and right and left and right, and it spins. You have no clue where you're headed. But you feel quite sure that you'll arrive at the correct spot at the bottom. And that's their current state. They're sort of waiting to find out what will occur. So I'd say the sole difference from the prior call is that they remain unsure; they're still examining items with quick payback; yet folks frequently ask me, "What would need to occur for them to turn positive?" My view is that if Washington settled down and we saw steadier activity plus additional quarters of progress that stayed consistent, then that would mark a significant shift. So that's how I view them at present. They're discussing these matters. The administration pleases us, but its direction is unclear to us.

Scott Stember

analyst
#9

Understood. Now regarding Snap-on and that shift you're making, would you say the transition is complete and you're producing the product?

Nick Pinchuk

executive
#10

There's still more work ahead of us. There's still more work ahead of us. That said, those 1.4s gave me reason for optimism. When you examine it, we started this year roughly 7% in the hole; after that we sat at 7.7% down. Then it was 3.7% down, and at this point we're down 1.4% on an organic basis. So to me, that signals something fairly favorable. Someone could argue, "Perhaps it should have been stronger or weaker." Our trajectory gives me a lot of confidence, since we continue pivoting. We continue improving at what we do. The slope of that curve, though, isn't something I can give you; but I do. The approach we've taken is delivering results. It's delivering results.

Scott Stember

analyst
#11

Great. Then just one final question about C&I and RS&I. Can you give us the external sales figures for both, on an organic basis?

Nick Pinchuk

executive
#12

On external sales, I'd say for RS&I they came in closer to the level you'd expect. For C&I, external sales landed at roughly half of that, or something along those lines. It stayed kind of within that same band, though a touch below. That's just the way it is. The reason is that with C&I, a portion of what they make — some of the tool items, the torque items — flows through the Tools Group.

Scott Stember

analyst
#13

Ah, understood. Okay. Fantastic. Alright, that's everything from me at this point. Thanks.

Sherif El-Sabbahy

analyst
#14

Hello. Good morning. Yes, absolutely. I was simply curious whether you might provide a little additional detail regarding the drop in originations. Is it largely driven by product mix? Are customers financing a smaller share of their purchases in general?

Nick Pinchuk

executive
#15

Largely. Largely. Tool storage was down. That was the reason. You follow what I'm saying? And keep in mind, Sherif, that fits into the pivot. Put differently, people are less inclined. I believe this is a foreseeable result—something I've been mentioning regarding what customers prefer. Some of it comes from their desire for fast paybacks. Said differently, they want things that perform immediately. Beyond that, when they purchase these items from the van using what we'd refer to as revolving accounts, they settle the balance within 15 weeks, or they pay cash or whatever suits them. Consequently, they tend to direct more of their funds toward those shorter items, clearing the obligation within 15 weeks, and they avoid getting locked into a three-year arrangement; and that accounts for the originations. There's another element as well, and you identified it—very perceptive of you—which is that the Apollo Plus sits at the lower end of the, recall I mentioned it had the quickest payback, meaning the lowest cost access to full intelligent diagnostics. And a greater share of that would be managed on an RA rather than, for instance, a Zeus, which costs considerably more, being the top of the line. So with the diagnostic line, the new product we launched, a portion of that could be managed not on EC. So all of those play a role; but I want to emphasize, though, as I do during every one of these calls, that originations tie to sales off the van, not sales to the van. Therefore they don't automatically move within the same timeframe. We sell a box to a van; it doesn't automatically sell off immediately. Occasionally the person pitches it to buyers for a while. So it's not an exact science. But what you're mainly observing, to give a quick answer, is that 5.9% reduction in originations in total, I think that was the figure, is primarily the result of lower tool storage sales. Thank you. Sure.

Luke Junk

analyst
#16

Morning. Appreciate you fielding the questions, Nick. I'd like you to go a bit deeper on the momentum you're currently seeing in specialty torque. And just broadly speaking, it feels like that ought to pay off in several places, spanning both critical industries and a few of the expanding opportunities in auto repair. And maybe, Nick, any perspective on spending in that area? Obviously, I view it as an organic priority. But might we expect further M&A? Mountz appears to have worked out quite well.

Nick Pinchuk

executive
#17

That's definitely somewhere we've examined; we bought Mountz a year ago, which, I believe, during last year's fourth quarter, was a company in torque, a maker of torque-controlled power tools. So it provided us; it was a portion of the technology behind bringing that CTM800 to reality. Among the efforts underway, I think we'd want to put money there. And so that would be among our main areas for seeking out investment opportunities since we hold a strong conviction about it. Another effort we're funding in a sort of organic fashion is attempting to merge the operations so we generate additional combinations. The CTM800 blends the technologies we possessed in the gearing at Norbar, in the drives, the fundamental front end belonging to the power tools and Mountz deals, plus a few of the systems we hold regarding torque control for Mountz and cooling that we had in power tools. And that merged and produced a better tool that we think has no rival. So you'll watch us consider acquisitions, yet you'll also watch us attempting to commit some capital and interlocking those businesses. Not crushing, but striving to guarantee solid integration of connected technologies across those businesses since we think collectively they're rather formidable. Good stuff.

Luke Junk

analyst
#18

For my next question, I realize nailing this down exactly is tough, but Nick, do you have any perspective on the ongoing pressures and the large-item category, plus what's happening with origination? As we consider how much the Tools Group might expand this year, what volume of big-ticket business would be required to match the longer-term 4%-5% rate instead of shifting toward smaller purchases? Is there any method to gauge how much opportunity remains?

Nick Pinchuk

executive
#19

Certainly. In my view, small ticket still has plenty of room. The trick is coming up with items that draw customers in. To put it differently, the whole point of the pivot is mainly about expanding and introducing more appealing new offerings—we refer to them as hey-you products, standout items within the small ticket space. This way, customers get enthusiastic about things they'll actually commit to buying given current conditions. That's essentially the situation; that's the pivot as we describe it. It covers engineering and production along with, naturally, promotional marketing to package it attractively. So you can continue down that path. And our belief is that this maintains our upward momentum. Naturally, when folks are avoiding big ticket purchases, you aren't operating at full capacity. So pinning down that trajectory is difficult for me. With the pivot, I believe we stay positive since we understand how to make improvements. We likely won't be at full capacity until people feel somewhat more at ease. Still, I don't see it as whether we can maintain it. There's what I'd describe as a nearly limitless positive direction in the pivot; it's simply that we want all our offerings involved because our tool storage products are terrible; it's just that if we could get them involved, we'd have additional items, and customers would purchase more; so answering this is tricky. Yet I do believe that even without resolving the uncertainty, we think we could continue. Should the uncertainty clear up, things would become more normalized. I'm not claiming we can't return to normal without the uncertainty clearing, but it would require more time. That's it.

Luke Junk

analyst
#20

Okay, thanks, Nick. Right.

Bret Jordan

analyst
#21

Morning, everyone. Hi, Bret. I want to bring up the tariff issue, and I suppose, in a way, how things stack up depending on what does or doesn't take place, with your U.S. mix compared to rivals. Where do you think you stand, and what effect would that have?

Nick Pinchuk

executive
#22

Look, if you give me your prediction on where the tariffs will end up, then I can give you my answer on what that will mean.

Bret Jordan

analyst
#23

That's what I was looking for the answer to.

Nick Pinchuk

executive
#24

Right? I'm not sure. Right? But listen, let me put it this way. When it comes to tariffs on imports, we're definitely more shielded than most companies are; so should broad tariffs pile up on many foreign goods, I figure we come out ahead. Because in that scenario, I like where we stand. That said, we aren't completely protected from it. Tariff expenses are something we face today. For years, we've been absorbing them. A few things we bring in do get hit with tariffs. But by and large, we manufacture in the very markets where we sell, and a massive share of what we offer is produced here in America, or we're in solid shape. If you mean other tariffs, the retaliatory kind, who can say? There's no telling what others might do. Still, this isn't our first time at the rodeo, in my view. Like I mentioned on my call, we understand how to navigate that. Once we saw these things emerge, we were already considering how to sort of reduce and fine-tune things in that scenario. And there are ways to pull that off. So none of this has us trembling in fear.

Bret Jordan

analyst
#25

Now, regarding why our international tool business is performing better compared to the U.S., what would you say is behind that? Could it be that there's simply less rivalry? In those overseas markets, you won't find Harbor Freight or Matco. So the competitive environment is not the same, correct? Or how would you describe it? Who was it you mentioned? Matco, Harbor Freight, Mac — those are the companies offering tools within the U.S. marketplace that don't operate on an international scale.

Nick Pinchuk

executive
#26

No, listen, I really don't believe that's what's going on. I don't believe anyone actually claims that. That isn't how things stand in the U.S. — the U.S. is just connected to it. When you consider the things people are unsure about over there — the border, plus now you've got those two wars happening in other parts of the world. Australia, I'd say, views itself as shielded from all of that, and then there's the election. There's what I'd describe as the fast-moving proposals coming out of Washington. There's the cost increases. So the whole uncertainty factor, I'd say, hits the U.S. harder than anything else does. Our business in the UK looks steadier, and much of this, Bret, traces back to where you're from — so the overseas operations, if you look at the history, have been struggling for some time. At this point they've recovered a bit, so you're witnessing part of that bounce back in that scenario. Honestly, I don't feel the competitive landscape shifts all that much in either market, since you've got other rivals who compete nationally. Take Australia — you've got folks there that customers favor; and the technicians don't possess their own tools to the same degree they do over here. You've got all of that. So I don't think there's a lot. The competition isn't what differs between the organizations, between the locations.

Bret Jordan

analyst
#27

Okay, that sounds good, thanks a lot.

Nick Pinchuk

executive
#28

Now we'll take a question from David MacGregor, who is with Longbow Research. Go right ahead.

Joe Nolan

analyst
#29

Morning, everyone. This is Joe Nolan, covering for David. Joe Nolan. Right. Yes, that's how it looks. All right, I'll just get started. Glad to have you join us. What did you say? Glad to have you join us. Thanks. I appreciate that. To begin, the critical industries segment and the torque tools operation both turned in a solid quarter. You've put money into capacity for that area. So my assumption is you're fulfilling some orders from backlog. What I wanted to know is how order activity looks right now, and whether you're—

Nick Pinchuk

executive
#30

Things are going pretty well on the order front. I mean, some backlog does exist for us there, as is always the case; at an earlier point it was larger; it accumulated. When we introduced a new expansion, we didn't exactly clear out the backlog—more like we brought it back to a normal level. So I wouldn't describe it as the backlog piling up. Still, it's held up quite well. That makes me feel good about the critical industries. What stands out is that demand appears to keep climbing, since complex and customized kitting seems to be in high and rising demand. It feels like everyone wants a set tailored to their specific issue, and we can hit that target precisely—and we might be the only company doing that really well. On top of that, you get a large assortment of Snap-on tools in there, and that adds a different kind of prestige to the overall set, so that segment is one we really like. It appeared to climb a lot during the quarter. I won't share the figure, but what I can say is that segment performed incredibly well in the quarter. So my confidence in it is fairly high, and it delivers strong margins.

Joe Nolan

analyst
#31

Yeah, that's fantastic. I realize you folks don't give guidance, but when I think about how that business's margins might look in 2025, what are the various pieces in play? Clearly, the critical industries' strength helps margins. Is there anything else you could share?

Nick Pinchuk

executive
#32

The only thing I can say is that what I attempted to convey during this quarter was that we had a couple of elements. Essentially, the Tools Group was coming back, shifting direction, and closing the distance. Naturally, it was lower, though only by a tiny fraction compared with how far down it had been. The outcome, 22.1%, an increase of 50 basis points. If you examined the prior year's figure closely, you'd notice there may have been a lift, a slight assist from certain special items such as a legal settlement and things of that nature during that quarter. So it rose enormously and impressively; and that came from the other two groups truly delivering remarkable quarters in terms of profitability, no doubt. And that profitability stemmed from the notion that certain divisions generate more profit. For RS&I, the software segment was performing spectacularly. And within the C&I Group, the custom tools, the critical industries, those tailored kits, spectacular. And beyond that, as I mentioned regarding RCI, and I suspect this got overlooked in my remarks, throughout RS&I, the vast majority of the businesses, including the hardware ones, gained more than 100 basis points. And that was RCI, Rapid Continuous Improvement; so looking ahead, you've got solid runway for those profitable businesses and apparently strong momentum from RCI throughout the company. I trust nobody overlooks that this quarter. Yeah. Understood. That's wonderful.

Joe Nolan

analyst
#33

Then, real quick on the Tools Group — sorry if this was covered, but did sell-in versus sell-through for the quarter come up?

Nick Pinchuk

executive
#34

No, I didn't mention it. They're roughly in line. Understood. Okay. Excellent.

Joe Nolan

analyst
#35

Appreciate it. I'll hand things over. Of course.

Sara Verbsky

executive
#36

Thanks, everyone, for being with us on this call. A recording of today's session will be posted before long at snap-on.com. As we always do, we're grateful for your interest in Snap-on. That's all for now.

Operator

operator
#37

That brings this conference to a close. We appreciate your joining us for today's presentation. You are free to disconnect at this time.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Snap-on Incorporated transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.

Get the API View API docs →

This call discussed

For developers and AI pipelines

Programmatic access to Snap-on Incorporated earnings transcripts and 132,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Snap-on Incorporated or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.