Snap-on Incorporated (SNA) Earnings Call Transcript & Summary
April 17, 2025
Earnings Call Speaker Segments
Sara Verbsky
executiveThanks, Nick, and hello to everyone on this call. We're glad you could be with us this morning while we go over Snap-on's results for the first quarter, and you can find all the details in the press release we put out earlier today. Joining us are Nick Pinchuk, who serves as Snap-on's Chief Executive Officer, and Aldo Pagliari, Snap-on's Chief Financial Officer. Nick is going to get things started this morning by sharing how he views our performance. After that, Aldo will walk through a more thorough look at our financial results. Once Nick offers a few final remarks, we'll open things up for your questions. As we always do, we've made slides available to go along with our discussion; you can find them beneath the Downloads tab within the webcast viewer, and also at our website, snapon.com, in the Investors section. Those slides, together with a transcript of today's call, will be kept on our website. Anything said on this call about management's expectations, estimates or beliefs, or that otherwise addresses management's or the company's outlook, plans or projections, counts as forward-looking statements, and actual results could end up differing materially from what those statements suggest. You can find additional information, along with the factors that might cause our results to differ materially from what the forward-looking statements indicate, in our SEC filings. Lastly, this presentation contains non-GAAP measures of financial performance, and those shouldn't be viewed on their own or as a replacement for the comparable GAAP figures. More details about these measures appear in our earnings release issued today, which is available on our website. So with all of that covered, I'd like to hand the call over to Nick Pinchuk. Nick?
Nick Pinchuk
executiveAppreciate that, Sara. Morning to you all. My habit is to kick things off with Q1, and along the way I'll give you my read on our results, the sectors we compete in, current conditions, our position within this turbulence, the way we're answering it, and what we think it points to going forward. Once I'm done, Aldo will take you through the numbers in more depth. Interesting times indeed. I doubt any of us have witnessed a stretch quite so jammed with economic news, political shake-ups, escalating tariffs, and the administration warning that things may get painful before the renaissance shows up. The blows really do keep landing. That doubt shows up more officially in the consumer sentiment index, which fell sharply — down 30% since December. That's the second-lowest reading on record, and it hit the outlook for our grassroots economy hardest, including our technician customers. It pushed them to move away from longer payback financed items that cost more than the tools themselves and toward products with faster payback. That's what caused the pause in our upward trajectory you can see in this quarter's numbers. Reported sales came in at $1,141.1 million, a 3.5% decrease, which includes $13.9 million in unfavorable foreign currency translation, while organic sales declined low single digits, 2.3%, with mixed results across the operating groups. For the quarter, operating income came in at $243.1 million, down from $270.9 million in 2024. Our OI margin landed at 21.3%, compared with 22.9% a year earlier — and as a reminder, that prior-year figure carried 90 basis points from the favorable 2024 legal outcome. Worth noting too: gross margin reached 50.7%, a 20 basis point improvement even with lower volume. Essentially, the shortfall in our OI margin came down to our choice to keep investing in order to protect and build on the ground we've gained in product, in branded, and in people — because our conviction during the pandemic was that the smartest path out of disruption is to come through it at full strength. That's exactly what we intend to do. On the Financial Services side, we posted operating earnings of $70.3 million, which is a 2.9% increase over the prior year, coming off last year's $68.3 million. So the OI margins as reported for the quarter, taking in both Financial Services and opco, came to 25.2%, compared with 26.5% a year ago. Quarterly EPS came in at $4.51, a decline of $0.40, and that reflected the lower volume along with 16% from last year's legal payment and $0.09 in higher pension amortization costs that are baked into the 2025 figure. So let's shift to the markets now; in our view, auto repair is pretty essential. It's holding up well. It's still a fantastic space to be in, and the industry metrics back that up. So, several folks have mentioned that the number of hours worked has declined across the past two months, and that is accurate. However, nearly every other indicator looks encouraging. The typical age of vehicles on U.S. roads stands at 12.6 years, and that figure keeps climbing — it's already high and continues to rise. Household outlays for repairs — particularly for automotive fixes — have risen substantially, whether you compare against the same period last year or look at the trailing 12 months, and compensation for technicians continues to grow at a healthy rate, somewhere in the mid-single digits. Even so, techs are among those who have felt shaken by the current instability. A lot of them think things will eventually move toward a better place. Yet they're worried the economy could fly off the rails before that happens. These working people belong to the wider population fueling the decline in consumer sentiment. Even though they're sitting on plenty of cash at the moment, they sense they lack the financial safety net for an off-the-rails kind of event; because of that, they're hesitant to take on finance products. When it comes to things such as tool storage boxes or top-of-the-line diagnostics, we see it plainly in the double-digit decline in originations at our credit company. On the other hand, among technicians, confidence hasn't recovered yet, but they're still drawn to products that pay off quickly and reduce hassle on the job, plus they want bigger paychecks. That's why our Tools Group keeps shifting direction to match present-day demand, and we're bringing persistence, sharpened focus, and self-assurance to help that group regain its sales trajectory, just like the one it established a year ago — so that covers the tech segment. Vehicle repair is another piece of the picture. There we serve independent garages along with OEM dealerships, which for practical purposes form a distinct group from the technicians. That segment is what we call RS&I. The people working in those garages continue to arm themselves with the latest tools and diagnostic platforms, meeting customer demands and returning vehicles to the road quickly; they get it that spending on upgrades is necessary; they realize they need fresh, inventive offerings—both hardware and software—that raise productivity along with how efficient and precise repairs are. Keeping pace with how complicated modern, highly engineered cars have become is essential; in the current environment that's simply the baseline, and those who own and run repair businesses will keep moving in that direction. There's another opening in the markets—within the sector we've chosen to focus on, namely critical industries. We refer to that market as critical industries — areas like natural resources, the military, aviation, and heavy-duty fleets, where a breakdown carries a steep price. That's the space where C&I makes its living, delivering tailored offerings that help new operations get up and running and take complexity out of the work they can't afford to get wrong. Of course, as is true of anything, we encounter ups and downs from one period to the next, and results differ by region and by segment, particularly at the moment. During Q1, there was that usual lull in military-related work that tends to happen for a short time whenever the Department of Defense gets a new secretary. Once that period of disruption passed, though, the war fighters moved forward and things got back on course. Overall, this is a strong area for us. We believe critical industries today offer a lot of opportunity, and we feel we're getting stronger there every day — bringing in more customers, using what we learn to expand our offerings, and growing our presence in both breadth and depth. So all things considered, I'd say our markets are the kind that keep opening up new possibilities. Of course, the environment we're in comes with challenges and plenty of upheaval. Even so, we have confidence that our advantages — along with product lines we keep bettering that tackle essential needs, a standout brand that basically defines what a professional is, and a highly experienced team equipped in exactly these ways — will carry us through. Now, let's pause for a moment on the major subject of the day: tariffs. That phrase showed up in the Wall Street Journal last Friday 254 times. By yesterday, it had fallen to only 163 mentions. Said differently, the world is blanketed by tariffs — a stretch when so many variables keep moving that clarity about what lies ahead is difficult to achieve. This kind of climate demands swift measures to adapt, to fine-tune and to seize the upside, and amid that haze we remain sure. Tariffs, naturally, do pose a challenge we can't escape, yet we think Snap-on holds a big edge thanks to our approach of producing within the markets where we sell, allowing fast tweaks to evolving manufacturing conditions that will probably arise. The plants are already in place.
Nick Pinchuk
executiveWe have 36 plants globally, with 15 located in the United States, and we've recently expanded many of them. We're in a strong position when it comes to American-made goods. Our key product categories are already manufactured here, utilizing steel from the U.S., and our domestic facilities already turn out some version of nearly every line we offer. That translates to no lengthy ramp-ups for products that get relocated. The resident expertise is already based in the U.S.A. And regarding the specific items we bring into America that involve certain components subject to high tariffs, we operate 21 plants beyond the U.S. with sourcing operations in suitable locations, which provides us with a wide array of alternative supply options. Last, skilled American workers — one obstacle to reshoring or responding to tariffs is that skilled American workers are scarce. After all, the National Association of Manufacturers reports that right now there are 500,000 unfilled jobs in U.S. manufacturing, yet we haven't struggled to fill positions. And we're confident we can keep doing exactly that going forward. So we're caught in the crosshairs of tariffs, yet we remain confident; and we think we can handle and navigate the disruption. We aren't shielded from the effects, but we believe we hold a significant edge. Now let's turn to the segments. Within the C&I group, organic sales fell 2.9%, low single digits. C&I's operating income came to $53.2 million, which is $2.2 million under the 2024 levels, though operating margins reached 15.5%, a fresh first quarter record, rising 10 basis points versus last year. Keep in mind the first quarter is always seasonally somewhat softer for C&I; effectively, though, if you consider the — here's the crucial takeaway, gross margin for C&I — gross margins within C&I for the period stood at 42.6%, climbing 180 basis points. Yes, 180 basis points. Effectively, we kept making only those investments meant to widen our advantage even with lower volume, and it was a carefully weighed trade-off against gross margin improvements, but we think it was justified; we're confident in and dedicated to expanding in critical industries, and we'll continue reinforcing our standing with C&I going forward. Watching the task and applying those learnings to create products that simplify work throughout the critical industries. You can see this in our torque lineup, where precision and accuracy matter most. Pan Asian market, where the cost of failure — where the consequence is severe and keeps adapting our control tech wrenches, or what we refer to as the C-Tech, primarily in the U.S.A., produced at our facility situated in City of Industry, California. It's a growing footprint in aviation, spanning a broad array of sizes, each one specifically tailored to a distinct task. Aerospace manufacturers and technicians favor these products for their quality and accuracy, yet the real standout is their capacity to record the force applied to the fastener wirelessly, generating a record — a delicate task has been finished exactly as specified. So as we've just come to understand, that matters a great deal when you're dealing with aircraft. That's among the reasons this product is so much stronger. Out of our Carol Stream site in Illinois comes a top-tier range of preset torque wrenches along with wireless controllers — equipment that performs at the highest level in any production setting. What we're demonstrating is that cutting rework, lowering warranty costs, and simply boosting customer satisfaction are essential. Honestly, that applies just about anywhere. This operation is vital. So our SR control connects to the manufacturer's internal system, and engineering protocols get passed straight from there to the operator on the shop floor — pinpointing the correct tool, verifying the job is done and done right, and keeping the record, all so the proper specifications get applied and nothing departs the line unless it's completely correct. Then at our newly expanded Kenosha facility — another of our U.S. expansions — the C&I custom tool department accomplishes what's extremely hard to do. A recent case: an aviation maintenance operation needed a unique, unusually long 3-inch flying socket to reach a very tight space and an exceptionally high-performance wing structure. That's not a simple tool to build or to source, yet our customer product team in Kenosha designed it, tested it, and got it into the customer's hands, all quickly, making that crucial job simpler through insight and speed that only comes from an operation near the customer — something only an operation close to the customer can deliver. In Murphy, North Carolina, our power tool plant introduced a new combination set that was received quite well. The starter set was our PH3050B-series air hammer, which truly packs a punch — striking with unwavering force, handling heavy-duty repairs with power and speed, 2,500 blows per minute. Our specialty hardened piston hits the chizzle with enough kinetic energy force to dislodge even the most stubborn components. But the neatest aspect of the design is the special Kevlar disk within the hammer's body that absorbs the shock, dramatically softening vibration, making it more ergonomic, far easier and more comfortable for the operator — no more jackhammer joints. Now — now — as I said, that beast hammer comes paired with our most popular air chizzles, hot forged for durability at our Elizabeth, Tennessee plant, and kitted into a <<inaudible>> for easy storage. It's a great package, and the techs know it. So that's C&I, high in first-quarter profit margins, delivering solutions that make work easier — make work safer and easier and more productive, all made possible by American plants. Now on to the Tools Group. Organic sales fell 6.8%, with a high single-digit decline in the U.S., partly offset by a low single-digit gain internationally. The difference between those markets, you'll note, opportunity income of $92.4 million versus the $117.3 million of 2024, with an operating margin of 20%. The Tools Group kept running into difficulties, since technicians were becoming less sure of themselves and far more reluctant to buy anything with a lengthy payback period — items such as oversized tool storage buckets, or really any big ticket purchase. Moving toward products that pay back quicker was picking up steam, pushing back against the anxiety caused by the wars that keep going, the border crisis and steady inflation. Even so, in our view what happened during the first quarter pushed confidence down faster than before, outpacing the steady gains from the group's pivot. That pivot gets its momentum from changed capacities plus fresh marketing and promotional efforts, and perhaps above all from rolling out inventive new offerings that deliver an immediate effect with a short-term payback. Consider products like Maiden Snap-on factories, or the Milwaukee, Wisconsin plant we just expanded, which takes raw American steel in through the back door, forges it to a near net shape, and applies skill and know-how to harden and finish that steel into a finished product. Take one instance: our low profile of flank drive socket capacity, which we recently expanded, designed on purpose to work through tight quarters, letting the tech beat the clock, beat the flat rate and speed up the repair by going around obstacles rather than taking them out to get at the fastener; it gets right around; no time has to be spent pulling the obstacle out.
Nick Pinchuk
executiveWhen it grabs hold, the patented design clamps onto the flat side of the bolt instead of the corner, moving the part fast and easily without wrecking the fastener's points. Quick payback items such as our Synergy 100 tooth ratchets, produced at Forge in Elizabethton, Tennessee — a design that's never been seen before for strength, simple use, and confined spaces — have now rolled out across our full range, even the hard-to-build long-handled versions. In the course of this quarter, we paired that synergy with a family of low-profile sockets — something that brings greater accessibility, versatility, and reliability. Shops love that combination, because those sets with fast payback line up exactly with what techs are after at the moment. And anytime technicians move from one bay to another or from one job to the next, they need versatility to make quick adjustments and pull hardware. Our adjustable wrenches, made at the Elkmont, Alabama plant, were another fast-payback winner — in fact, that lineup is a winner. On the market, there are no other adjustable wrenches made in America. It highlights flexibility that comes from U.S. manufacturing, handling numerous fastener sizes with just 1 tool. And here's the neat thing: the smaller versions slip easily into a pocket, so they stay ready as you travel bay to bay. And for buyers who need to protect their tool investments, we launched the newest members of the roll cart family, our KHP46; this sits at the lower end of the bigger ticket items; it comes out of our Algona, Iowa facility, and delivers tough, secure storage just 40 inches wide, so it's simple to place directly in the work zone; yet it comes with slides giving drawer capacity as high as 240 pounds; meaning it's a sturdy chassis capable of holding whatever is needed to keep essential tools near the workplace. Also, the upper section of this unit offers multiple configuration options for keeping power tools organized. A 120-volt outlet is built in, along with a USB port, so every tech electronic accessory and cordless battery can charge and remain ready to go. The KHP46 is a roll cart — solid, easy to move, packed with strong capabilities — a reliable storage solution that pays back faster. It delivers what's required: confidence in poor tech that demands an upgrade to storage right now, and it's a popular choice. So that covers the Tools Group, supported by U.S. factories, vertically integrated, capable of accelerating, with designs and the flexibility to pivot toward short payback items, committed to winning through the turbulence. Let's now move on to RS&I. During Q1, we brought in $475.9 million in sales. Organic growth reached 3.7%, with our Diagnostics and Mitchell 1 businesses contributing gains, plus we saw robust double-digit increases throughout our OEM markets. At RS&I, operating earnings hit $122.1 million — that's up $9.2 million, or 8.1%, compared to the same period last year. Operating margin landed at 25.7%, marking a first-quarter all-time high, and it sits 140 basis points higher than 2024, fueled by continued software expansion and benefits from RCI. Amid all the volatility this quarter, RCI was a real standout, delivering a tremendous result, and our product is what made that happen. So let's take a closer look at that product. We keep broadening our software coverage, drawing on proprietary databases containing more than 500 billion data points plus 3 billion repair records — figures no one else in the industry can match, and they help technicians navigate and diagnose cars faster. That's a durable edge; and we stay aligned with what techs prefer, staying consistent or current with what the tech wants now. We marked the 20th anniversary of our SOLUS diagnostic unit. This latest edition, called SOLUS+, is built at our San Jose, California production and development center; it's designed to simplify the complex and speed techs up at diagnosing the true failures of modern vehicles. This device is the quickest one we offer that you can hold in your hand — it powers on in two seconds — and it gives you the speediest path to getting your money back while delivering strong vehicle diagnostics, and technicians responded to the campaign because they saw both the capability and the velocity of this handheld along with a rapid return on investment. That initiative genuinely stood out as a high point for the quarter. Further into the quarter, our facility in Rochester Hills, Michigan introduced the brand-new PRO-LINK+ platform — a handheld diagnostic platform built for heavy-duty commercial trucks, featuring fresh hardware, a quicker processor and better touch responsiveness. Still, the most significant leap is that it connects with our repair database — specifically the repair databases from Mitchell 1 — which places repair procedures, vehicle specifications and step-by-step routines for fixing the truck directly into the technician's hands. Thanks to the new PRO-LINK facility in Michigan, Snap-on has moved into a clear lead in heavy-duty diagnostics covering multiple models. Our lift manufacturing operations are located in Louisville, Kentucky, where we build every kind and size of lift. Among our strongest performers is the challenger CD10 AB3, a two-post lift that stands out because it can be adjusted while in use. It installs easily in any bay at any shop, and it packs enough strength for many different vehicles. Getting a vehicle off the ground is necessary for reaching the suspension, for transmission work, and for servicing EVs. With this lift technology, a variety of shock tests are possible, and technicians can modify how high something hangs, which lets them find the most ergonomically sound way to do the job and get themselves nearer to the work area for carrying out the fix. The Challenger 334 B is an excellent item, and its origin in Louisville, Kentucky is common knowledge; we recognize that these are unsettled times. Even so, RS&I delivered a robust quarter, and our belief is that even more lies ahead. We keep working to elevate that segment's reputation with the people who own and run repair shops, introducing additional new items developed via our value creation process, and from where we sit, this method prevails. So that was our first quarter, a period featuring both hurdles and progress, gross margin at 50.7%, rising 20 basis points even with the volume — those softer volumes. The Tools Group keeps shifting toward items with quicker payback, aligning with what techs prefer. C&I is making inroads in critical industries, posting a Q1 operating margin of 15.5%, powered by Precision Torque and Custom Solutions. RS&I likewise set an operating margin record during the first quarter, 25.7%, powered by software and a database without equal. The environment is curious; we remain on alert, yet we are confident, confident about our product, our brand and our people, and confident in our capacity to face the fog holding a clear advantage. I'll now pass the call to Aldo. Aldo?
Aldo Pagliari
executiveThanks for that, Nick. On slide 6, you'll see how we performed on a consolidated basis in the first quarter. We brought in net sales of $1.141 billion during the quarter, compared with $1.182.3 million in the prior-year period. That works out to organic sales falling 2.3%, along with $13.9 million in negative impact from foreign currency translation. Results in our automotive repair markets were mixed. We saw higher sales to OEM and independent shop owners and managers, but that was more than offset by a drop in sales to technicians through our franchise van channel. Now looking at the industrial side, inside our C&I group, versus last year, lower sales to the military and to our European-based hand tools business outweighed the gains we posted with other critical industry customers. Our consolidated gross margin was 50.7%, which is 20 basis points better than the 50.5% we posted a year ago, and the main driver there was the gains we're seeing from the company's RCI initiatives. When you look at operating expenses relative to net sales, they came in at 29.4%, and that's 180 basis points higher than the 27.6% figure from 2024 — mostly because last year we had a nonrecurring benefit of $11.3 million tied to legal payments we received, plus the impact of lower sales volumes, though savings from RCI initiatives did offset some of that. Operating earnings before financial services for the quarter were $243.1 million, compared with $270.9 million in 2024; measured against net sales, our operating margin before financial services was 21.3%, versus the 22.9% we reported last year, and that prior-year number included a 90 basis point benefit from the legal payments. On the financial services side, we brought in $102.1 million of revenue during Q1, up against $99.6 million a year ago. Operating earnings came in at $70.3 million, versus $68.3 million in 2024. When we look at consolidated operating earnings, those totaled $313.4 million, compared with $339.2 million during the prior year. Our operating earnings margin worked out to 25.2% of revenues, down from 26.5% in 2024 — and that figure, once again, factors in the legal payments benefit. For the first quarter, the effective income tax rate stood at 22.2% in each year. Net earnings reached $240.5 million, against $263.5 million in 2024, while diluted earnings per share came to $4.51 for the quarter, compared with $4.91 per diluted share a year earlier. Looking at how this quarter's EPS stacks up against Q1 of last year, we see $0.25 in headwinds when measured year over year. Diluted earnings per share for the first quarter of 2025 carried roughly $0.09 per share in higher non-service net periodic pension expenses compared with a year earlier, driven mostly by greater amortization of actuarial losses, whereas Q1 of 2024 had a $0.16 per share gain tied to the legal payments. Moving on now to how our segments performed this quarter. Let's begin with the C&I group, shown on Slide 7. Sales came in at $343.9 million versus $359.9 million a year ago, which works out to a 2.9% organic sales decline plus $5.6 million of unfavorable foreign currency translation. On the organic side, we saw activity with customers in critical industries decline by a low single-digit percentage, and the same was true for our European-based hand tools business. Within critical industries, military sales dropped by a double-digit rate, mostly due to delays in contracts, and that decrease was larger than the improvements we recorded in specialty torque products as well as in other critical industry sectors. For the first quarter, gross margin reached 42.6%, which is 180 basis points higher than the 40.8% we posted in 2024. The primary factors behind that were reduced material and other costs, greater volumes in the critical industries sectors that generate stronger gross margins, and the savings we achieved through RCI initiatives. Operating expenses were 27.1% of sales for the quarter, versus 25.4%, which mostly shows the effect of lower sales volumes. Operating earnings for the C&I segment reached $53.2 million, down from $55.4 million a year earlier, while the operating margin rose 10 basis points to 15.5% from 15.4% in 2024. Moving on to Slide 8. Sales in the Snap-on Tools Group were $462.9 million, versus $500.1 million a year ago, which reflects a 6.8% organic sales decline along with $3.6 million of unfavorable foreign currency translation. That organic decrease came from a high single-digit decline in the U.S. business, partly offset by a low single-digit gain in our international operations. For this quarter, our view is that growing unease about the economy kept eroding confidence along with how technicians feel, and that damaged their appetite for additional buying given today's conditions. On gross margin, we saw a drop of 190 basis points, landing at 46.3% for the quarter versus 48.2% a year ago, driven primarily by a shift in the product mix compared with last year and by lower volumes. Operating expenses came in at 26.3% of sales for the quarter, against 24.7% in 2024, mainly a reflection of softer sales volumes. The Snap-on Tools Group posted operating earnings of $92.4 million, down from $117.3 million the prior year, and its operating margin was 20%, compared with 23.5% in 2024. Now let's move to the RS&I Group on Slide 9. We brought in $475.9 million in sales, up against $463.8 million for 2024. That works out to a 3.7% organic sales increase, though $4.9 million in unfavorable foreign currency translation partly offset it. Within the organic gain, activity with OEM dealerships rose by a double-digit percentage, and sales of diagnostic and repair information products to owners and managers of independent repair shops posted a low single-digit gain. Those gains were enough to more than offset a mid-single-digit decline in sales of other car equipment. Gross margin came in at 45.7%, an improvement of 70 basis points over last year's 45%, mainly driven by higher sales of products with greater gross margin along with benefits from RCI initiatives, partly offset by increased material and other costs. On the expense side, we spent 20% of sales on operating costs, which is 70 basis points better than the 20.7% we saw in 2024. That gain came mainly from stronger sales volumes along with savings generated by RCI initiatives. For the RS&I Group, operating earnings reached $122.1 million, up from $112.9 million a year ago. Operating margin came in at 25.7%, which is 140 basis points higher than the 24.3% we reported last year. Moving now to Slide 10. Financial services revenue totaled $102.1 million, which is $2.5 million, or 2.5%, above the $99.6 million posted last year. Earnings from Financial Services were $70.3 million, compared with $68.3 million in 2024. On the financial services side, costs came to $31.8 million, up from $31.3 million during the same period last year, while credit loss provisions totaled $19.1 million versus $18.8 million in 2024. When you look at these expenses relative to the average financial services portfolio, the figure was 1.3% in Q1 for both years. For the first quarters of 2025 and 2024, finance receivables delivered an average yield of 17.6% and 17.7%, respectively. Contract receivables, in comparison, produced average yields of 9.1% and 9%, respectively. Loan originations for the first quarter totaled $268.7 million, representing a $33 million decrease, or 10.9%, relative to 2024, and within that, extended credit originations fell 11.7%. The decline in extended credit originations is mostly due to softer demand for expensive, longer-payback products such as tool storage units. Now let's look at Slide 11. At the close of the quarter, our balance sheet showed about $2.5 billion in gross financing receivables, and $2.2 billion of that total came from the U.S. business. When it comes to extended credit, or finance receivables, the U.S. 60-day plus delinquency rate sits at 2%, which is 20 basis points above the first quarter of 2024, but it's flat versus the figure we reported last quarter. Net losses on a trailing 12-month basis across the entire extended credit portfolio were $7.8 million, representing 3.41% of outstandings at quarter end. Even though late payments and net charge-offs have been climbing, we feel that when you factor in today's conditions, those measures of how the portfolio is performing are still fairly steady.
Aldo Pagliari
executiveNow let's look at Slide 12. Cash generated by operating activities this quarter came to $298.5 million, amounting to 121% of net earnings, compared with $348.7 million in the same period last year. The drop from the first quarter of 2024 is largely attributable to lower net earnings as well as a bigger increase in working investment than we saw a year ago. Net cash consumed by investing activities totaled $32 million, driven mainly by $22.9 million in capital expenditures and $8.2 million in net additions to finance receivables. Financing activities absorbed $193.6 million in net cash, including $112.2 million paid out as cash dividends and the repurchase of 260,000 common stock shares for $87.2 million through our existing share repurchase program. As the quarter wrapped up, our current authorizations still left room to buy back up to another $398.4 million in common stock. Now turning to Slide 13. Trade and other accounts receivable climbed $37.1 million compared with the end of 2024. Days sales outstanding reached 66 days, up from 62 days at the close of 2024. Inventories increased $17.8 million relative to 2024 year-end, partly reflecting investment meant to ease supply chain uncertainty; measured on a trailing 12-month basis, inventory turns of 2.4 were unchanged from year-end 2024. We ended the quarter with $1.434.9 million in cash, up from $1.360.5 million when 2024 concluded. On top of the cash we already hold and the operating cash flow we expect, our credit facilities give us more than $900 million to draw on. Nothing was drawn down or left unpaid on the credit facility at any point this year, and no commercial paper was issued or remained outstanding either — that covers everything I wanted to say about how we did in the first quarter. Now I'd like to walk through a handful of outlook points for the balance of the year. On the subject of corporate costs, our present expectation is that spending across the remaining quarters of 2025 will land at about $27 million each quarter. Beyond that, as we've mentioned before, throughout 2025 we've already taken on and anticipate taking on roughly $6 million in pretax nonservice pension costs per quarter, driven mostly by larger amortization of actuarial losses. These noncash costs are recorded below operating earnings as part of other income and expense net on our statement of earnings, and we'll have about a $0.09 per diluted share quarterly negative effect on EPS for the balance of 2025. We expect that capital expenditures will come to approximately $100 million, and we currently anticipate that our full year 2025 effective income tax rate will fall in a range of 22% to 23%. Finally, in 2025, our fiscal year will contain 53 weeks of operating results with the additional week occurring at the end of the fourth quarter. This occurs every 5 or 6 years. Looking back over time, this hasn't meaningfully impacted either our total revenues for the fourth quarter and full year, or our net earnings. At this point, I'll hand things back over to Nick so he can share his closing thoughts. Nick?
Nick Pinchuk
executiveThank you, Aldo. So that wraps up our quarter — a stretch defined by sharp, specific unpredictability weighing on technicians who were already lacking confidence, plus a sudden shift that pushed us backward during the period. On the whole, revenue declined by a low single-digit amount, specifically 2.4% on an organic basis. Our OI margin came in at 21.3%, a decrease yet still fairly robust, produced by a gross margin of 50.7%, which rose 20 basis points even with reduced volume, once again softened by our deliberate choice to continue investing in spite of that reduced volume. The Tools Group was hit by the ongoing explosion of commercial transformation, with both revenue and OI margin suffering, while C&I and RS&I delivered strong results as pillars of — they stood as pillars of sustained strength holding up the company. C&I succeeded in essential industries through torque and custom solutions, with revenue declining, though that is more than accounted for by the new military leadership settling in; and on the whole, it posted an OI margin of 15.5%, an increase of 10 basis points, setting a first quarter record. RS&I turned in another robust result, with revenue climbing 3.7% organically, alongside an OI margin of 25.7%, up 140 basis points, marking yet another first quarter record, fueled by advances in software, the strength of its databases and the advantages of RCI, with gains throughout that group; and naturally, the haze of tariffs — a challenge that controls the commercial environment — and Snap-on is not shielded from its impact, yet we think we hold an edge thanks to recently expanded facilities, 15 factories throughout America with deep American expertise to produce our key products, plus a global sourcing network, 21 plants spanning the globe to stay nimble and fine-tune against whichever tariff configuration materializes, along with a capacity to draw in and retain manufacturing associates; so these are fascinating times, jam-packed with news daily. We are vigilant. Yet we are also sure of our capacity to steer through the turmoil, sure of the possibilities open to us in our vital markets, and sure of where we stand amid the haze of tariffs — not shielded, but advantaged. And above all, sure of our product, which genuinely makes work easier. Sure of our brand, which genuinely distinguishes serious professionals, and sure of our people — battle tested and devoted — who carried us through — who carried Snap-on through the great financial recession and the pandemic and emerged roaring. And we trust that potent mix will conquer the turmoil and continue our long-term upward path, just as it has accomplished so many times before. Now, prior to handing the call to the operator, I want to address our associates and franchisees during these turbulent days. I will just say: for what you give every day, for your profound commitment to our team and for your unwavering faith in our future, held firm even amid the turbulence — I thank you all. I now hand the call to the operator. Operator?
Scott Stember
analystNick, you mentioned that — clearly, it seems like the shops are holding up fairly well, but technician confidence is dropping even more than it did previously. So what's the strategy going forward? Are there chances to shift further toward cheaper products, or does something different need to happen?
Nick Pinchuk
executiveWell, I believe a few things are at play. First, that pivot paid off during Q1. It's simply — I don't think we've encountered a moment where so many blows landed one after another. I mean, when the administration itself makes its moves, there's going to be suffering. This is somewhat unheard of. And it shows up in the — in how consumers feel. When you examine those figures, the decline since December is steep; and so we had no idea about that while we were speaking with folks; we spoke with franchisees across the nation and we picked up on that in the stores; and honestly, the reality is, our pivots succeeded. I spoke with a number of them who performed quite nicely. A few of those sets I mentioned moved well, a few of the items in — such as the cart moved well. What we discovered during this stretch, I'd say, that's somewhat different is we were shifting toward what you'd describe as typical short faster-return products. But what we realized, if we customized offerings at the lower end of the larger-priced items, such as carts that mimicked a box similar to the SOLUS, which sits at the bottom of the diagnostics lineup, we could capitalize on those too. Of course you can't claim you're capitalizing greatly when organic is down 6.8%, but that's genuinely what we observed in that scenario. So we'll continue pivoting since we witnessed ongoing momentum. It simply became overwhelmed. This is an odd stretch. I think anyone saying this is an odd stretch <<inaudible>> Wall Street Journal and encountering tariffs 254 times. And so the point is that's what we observed; so we believe the pivot — we picked up some lessons on how to execute the pivot more effectively; so we'll keep doing that. And we'll take those lessons as we make adjustments. We're quite sure this is effective. If you doubt it's America, check outside the United States, outside the United States, where there's less impact from all this upheaval lately, all those operations performed fine.
Scott Stember
analystUnderstood. So when you look at RS&I versus C&I — RS&I specifically — if you stripped out those intercompany declines, which I'd guess hit that segment pretty hard, what would the organic sales rate for RS&I have looked like?
Nick Pinchuk
executiveScott, it's slightly better than that. The organic rate came in around 3.7%, I believe. Strip out the intercompany items and you're likely sitting in the 4 range, roughly that, perhaps a touch higher in that scenario. With RS&I, the key story these days is its software. Software grew by more than the overall increase there; and what's great about it, Scott, is that when you look across the RS&I division, nearly every piece is up nicely on profitability. So they're firing on all cylinders. They genuinely put up a strong quarter. And looking backward, it's been strong quarter upon strong quarter upon strong quarter. I understand some folks might have figured it could have gone better; perhaps they'd have sold more. One could have made the case for maybe another percentage point, that's conceivable. Still, 25.7%, up 140 basis points, is a pretty good quarter; and it's powered by the strength of our product and the growing capability to leverage the database, with AI playing a role in that. Part of why the databases keep getting better and more effective is that we can now translate what the — when natural language processing is used, it converts what technicians report about repairs far more efficiently into a database with less time involved; so we can push ahead building that database far more effectively; and that has aided us in this situation. Yet you can see there that even within Diagnostics, we're making them — we're positioned quite well when it comes to the tariffs. I won't claim we're immune. I've repeated this often, we're not immune, but we're happy with where we stand.
Scott Stember
analystUnderstood; and so, one final query before I rejoin the line; it appears the military exerted quite a deep influence on essential sectors. Did that bear any relation to these Dodge actions? Or should we anticipate something in upcoming quarters <<inaudible>>?
Nick Pinchuk
executiveWhether it related to the Dodge, I can't say. My sense is it's more about folks attempting to — budget cycles exist within that. Still, I'll share this with you, Scott, we observed it in applied administration. Whenever the administration shifted, a new Sheriff arrives, and he refuses to be pushed around. So here's the thing — they changed — they begin discussing procurement processes and such, which slows everything down. Then eventually, the war fighters essentially say when 50-caliber bullets fly overhead, I'd prefer better tools. I don't want — I don't have someone else's tools or tools that are absent and everyone's case, and it returns to normal. Thus I believe that's truly what you're witnessing largely in a situation. I don't think it tied to Dodge except perhaps, Scott, the psychology of the Dodge sword waving overhead for all government employees. Yet I don't know how to assess that. It was significant. Without — let's phrase it this way, absent the military downturn, C&I would have been up. <<inaudible>> Everything else was good.
David MacGregor
analystTo kick things off, I'd like to ask about truck-level sales comps. How do you expect those to shape up in the U.S. this quarter?
Nick Pinchuk
executiveAre you referring to vans when you say that?
David MacGregor
analystAre sales comps off the van?
Nick Pinchuk
executiveThey're roughly at the same level we observed for the vans — around that same point; in this quarter the two were pretty much aligned. Matching up within a quarter hasn't been a consistent thing, though this specific quarter came in essentially dead on, pretty much identical. So the — what we sold them was about equal to what they moved off the vans; and I can't tell you what to make of that, because it always rolls up and down, as you know, since you've followed us for years, it kind of — typically it shifts from one period to another. But this was one of those that lined up.
David MacGregor
analystYet at the truck level, you didn't observe any destocking?
Nick Pinchuk
executiveThat's right, we didn't observe it. It's possible there was a bit, but I doubt it, since the figures lined up. Obviously, this is not a perfect — not a perfect scenario. And I'll say this: when technicians start talking about these matters, franchisees begin to feel overwhelmed. However, franchisees, I'd argue, possess considerably more cushion to handle what I described as off-the-wall matters — things off the rails. What I believe truly occurred shows up in customer sentiment, and perhaps a few franchisees picked up some of that, yet destocking was minimal.
David MacGregor
analystThen regarding what you mentioned about the unfavorable mix within the Tools Segment. I'm merely attempting to square that with the story <<inaudible>> large ticket?
Nick Pinchuk
executiveDiagnostics. The entry-level diagnostics moved well. Keep in mind, I mentioned that's the reason — that is truly the reason I included the SOLUS item there. First, we gained some insight into it that allowed us to make progress at the lower end of the big ticket products, provided we position and program them properly. And Diagnostics, propelled by that entry level, the SOLUS, the quick and less expensive option, rose during the quarter. And whenever Diagnostics rises in a quarter, it puts pressure on the Tools Group's margins since, as you're aware, they split the margin alongside the RS&I group.
David MacGregor
analystAll right, then, Nick — if we zero in on that category alone, how did hand tools perform?
Nick Pinchuk
executiveHand tools didn't increase, yet they definitely didn't decline the way Tool Storage did. Tool Storage was brutal. And should you examine the originations — should you examine the originations for the quarter, that becomes clear. As we exited last year, originations rose 5.8% — fell 5.8%, whereas during this quarter they dropped by nearly twice that, 11.7%. And I believe that tells the whole story.
David MacGregor
analystAlright, what's your promotional answer when demand softens?
Nick Pinchuk
executiveSo, our margins — gross margins within the Tools Group did decline somewhat, though part of that relates to the mix I mentioned earlier. Also, we generally don't adjust prices very much. I'd say, certainly throughout the whole corporation, that 50.7% gross margin is strong proof that a 20 basis point increase while your volume has fallen this much is strong proof you're not discounting. Therefore, although we do become more aggressive with promotions and we attempt to — we attempt to make things more appealing for the customer, we aren't out there pleading for volume. That's not something I like. So that's really not what we do.
David MacGregor
analystAlso, Nick, could you discuss the regional kickoff — would you discuss the regional kickoffs and simply whether orders rose or fell this year, and by what amount?
Nick Pinchuk
executiveThis year the regional kickoffs declined — and I won't tell you the amount, David, since it got distorted. Evaluating it is tough for us because, unfortunately, snow impacted a number of them. So here's what occurred with a few of the region — someone's read, that one was me. A number of these regions, I'm recalling that a number of these regions are fairly large. Consequently snow storms kept coming in until folks departed early. Thus we didn't really get the complete participation we prefer to have under those circumstances. So evaluating it was difficult for us. Among the items that proved hard to evaluate regarding what was going on in the quarter and the start was this, because we examined those, and many of them were subject to these sorts of one-off weather events. And so we couldn't tell what to think about it. Yet when you speak with the techs themselves, you can hear it certainly beginning to break through, particularly once we got later into January when you started here following the inauguration, everybody adores the — our people adore the administration. But as I mentioned — I believe I mentioned it last quarter, it seems like they're on Space Mountain, they fear they're going to come off the rails.
David MacGregor
analystAlright. My final question concerns production capacity. You've clearly made plenty of progress on that front lately, though I'd imagine backlogs have trended downward as a result of the current demand picture. Could you give a sense of the size of the decline in your backlogs? And which product categories are showing the biggest reductions in backlog?
Nick Pinchuk
executiveTool Storage. Keep in mind, we previously had — think back to — was it 1 year, 1.5 years ago, our Tool Storage backlog was overwhelming. Well, we've essentially worked that off. For one thing, we enlarged our Algona facility, and demand for the big ticket boxes has fallen. We've since moved more capacity toward lockers and carts and so forth, which I'd say is something we feel confident about moving forward; so we believe we're in good shape. I mean, we don't carry much backlog across the board. Sure, a few products do have some backlog, Swivel sockets, for instance, carry a bit of backlog; but there are always certain items like that; but overall, the added capacity has positioned us correctly; that's why we feel we're — one of the reasons we feel we're advantaged with tariffs. We are available for American production.
Gary Prestopino
analystNick, during your opening remarks you brought up that the number of hours worked had declined...
Nick Pinchuk
executiveThat's right.
Gary Prestopino
analystAlso the technicians during the quarter. I mean, fixing vehicles tends to be fairly essential work. So might we conclude that this involved fewer optional upkeep sorts of services, or how do you view it...
Nick Pinchuk
executiveGary, the reason I included that is simply because it's true. Hours declined — hours worked across the trailing 12 were higher by a low single-digit amount, yet higher nonetheless. Over the most recent 2 months, they fell. I believe it was 3.3%, or around there? I don't know what that signifies across 2 months. It does indicate, I guess, that certain garages haven't been exactly blazing hot during the most recent 2 months. Yet during winter, that might indicate many things; so under ordinary circumstances, recently, those things — and recently, every metric in vehicle repair has been steadily climbing, climbing, climbing, climbing, climbing. And so I guess we're somewhat attuned to the notion that across 2 months, had there been a decline, it caught my notice along with certain other folks' notice, yet I don't know what to conclude from it as a lasting pattern. You'd think that if hours fell, it's likely optional — optional work, since you must keep your car. So that's what you'd expect. And perhaps certain individuals fear the off-the-rail situation. I believe one thing you notice is consumer sentiment has fallen, you notice our figures have fallen. Yet you notice others claim, well, consumer activity remains robust, though I think they're working with a different <<inaudible>> stronger credits, the more — the more recovered individuals than perhaps the mechanics and the garage or the working people. And I think that's partly what we're seeing. We ourselves, Aldo, I believe mentioned during his presentation that our own yield declined from 17.7% to 17.6%, and that genuinely reflects that the individuals originating loans for us carry stronger credit risk than previously. And so it simply means those at the lower end are overly hesitant. They're overly affected by the uncertainty. So perhaps you notice a bit of that in the garages as well, I don't know. Since I think folks must fix their cars. Eventually, you must go in.
Gary Prestopino
analystRight, okay. Last thing—could you give some color on this? You kept bringing up how this entire tariff situation that's brewing might have shaken technician confidence. Over the course of your quarter, did the decline really pick up speed beginning in March? One could infer from your remarks that much of the hit, especially in the Tools Group, stemmed from that uncertainty around tariffs, which sort of appeared in March; so perhaps offer us some guidance?
Nick Pinchuk
executiveGary, from my conversations with the folks, tariffs weren't the sole factor. You hear, fine, we're going to shrink the government; but then they begin—I hold no political—there's political chatter, yet they're letting people go, seemingly haphazardly. Put differently, nobody has any idea what—so I believe the working folks, even if they genuinely support where the present administration is headed and its aims, are telling themselves, "I can't tell, I can't tell, how can they overhaul the entire government this drastically and not wind up with a few blunders." Then you begin picking up things about Greenland, afterward Panama and Gaza, you catch that news. Thus even prior to any talk regarding tariffs, folks were saying, "Gosh, I'm not sure what's actually going on here, I fear the world might fly off the tracks, and the tariffs arrived along the way." That's an extended manner of putting it. I doubt matters shifted all that much. I wouldn't claim it deteriorated. I figure overall, it was simply ongoing remarks where people said, "I don't know." Ultimately, our folks truly aren't much touched by the tariffs, yet they're sort of expressing the wider perspective: I don't know whether some administration can pull off this many moves, generating fresh ideas daily, without missing on a few occasions in ways that could harm us seriously; that's the prevailing sentiment. Now tariffs. Tariffs are a separate matter; they hit the companies more. When I mention the fog and tariffs, I mean it at the Snap-on level or the company level, as overwhelming everyone. Everybody wants—incidentally, everybody desires to discuss tariffs. Anyone capable of talking—desires to discuss tariffs. So it's a fog that genuinely reaches the technicians, and it reaches numerous other areas; we simply say, within that fog, as we peer ahead, we believe we hold an edge.
Sherif El-Sabbahy
analystNow, if we look only at the Tools Group, could you help us understand what the drop in demand looked like across the quarter — perhaps some sense of the cadence, if that's possible?
Nick Pinchuk
executiveSherif, that's a tough one to answer. Week to week, things tend to vary. This quarter was more even; it wasn't — as I was just trying to tell Gary, the — at the start, we figured there was really severe weather. So at times you can say, "Oh, okay, it's the weather." And that frequently occurs early in the year, since volumes are always light. And so you like that legend, the Princess and the Pea — any tiny shift will affect you; and — but it kept being weak, and when you talk to people, once the administration got in that place, they started listing and they're saying, "these are guys getting a little overactive," let's say. And that's when they started to worry about the world; it's interesting when you talk to the people at work, the technicians and the guys in the factory, they're pretty savvy on this stuff; and I think it's because they don't have that much cushion; and so they're very sensitive to this. We found this all through a lot of different situations. And in some ways, there's a canary in the coal mine because that's why I've been talking about uncertainty for some time.
Sherif El-Sabbahy
analystGot it. And we've discussed this pattern of moving toward items with faster payback for a good while now. Did you notice any change during the quarter when it comes to volume? Is it simply a more pronounced tilt in that direction? Or are you also seeing softer demand for certain items that pay back even quicker?
Nick Pinchuk
executiveWell, yeah. We definitely saw a number of those. But let me be clear — everything I'm telling you comes from what I think happened, drawn from a lot of interviews and windshield surveys, and it's supported by the customer metrics and the consumer sentiment figures. When you step back and look at it, we had — the items I brought up during the event, both in the script and in the discussions — things like SOLUS, a big hit, synergy paired with the plant rockets, likely a big hit, the ideas. So these are lower payback items that are big hits. The tool — the sturdy Tool Storage cart, holding 240-foot pounds, a big hit. So you had hits among the lower payback items. We basically didn't get much of anything from the large payback categories. That shows you where the improvement is happening. My take — and I believe this has been borne out by what we heard in interviews along with the consumer sentiment figures, both quantitative and qualitative — is that what happened to ordinary people during the previous quarter, capped off by the tariffs, was so widespread that it moved faster than the gains we were making on those items. So my view is that we have improved, it's just that all the other stuff, the overall level of all the other stuff, fell. But the areas we concentrated on appear to be delivering results; the trouble is you simply can't concentrate on everything.
Luke Junk
analystNick, to kick things off, I'd like to hear how you can be on the offensive given the current conditions? And perhaps one more specific point, focused mainly on the Tools Group, regarding marketing — specifically how you balance reaching franchisees against going straight to technicians. And on the investment side, that consistent cadence of spending, where do you think you might direct additional dollars this year?
Nick Pinchuk
executiveWell, I believe I've already made that point. We're somewhat heartened by the notion that we can make inroads at the entry level of what you'd describe as our classic high-ticket offerings. Once you've been running those programs for a period, for instance hand tools and power tools and similar items, you need to refresh a portion of them; and so at this point we've identified a fresh and fairly effective niche at the entry level of that, such as SOLUS, which costs far less than, let's say, ZEUS or a cart, which costs far less. I mean it might be a fraction of the cost of a large Epic unit. And so you get the sense that this is the sort of thing you can concentrate on. So we're somewhat heartened by that situation. And then, naturally, you press harder, you work to ensure that a greater share of your new product launches land in the space where you can make a difference. You don't want to burn a lot of effort worrying about, so you move resources away from the top of the line diagnostics, away from items like — away from items — a number of those are already in development at times, or items such as Epic tool storage boxes or anything carrying a very high price, and you aim to strike that ideal point and place the bulk of — the bulk of your development and promotional resources into those spaces. So we keep doing that. And especially when we observe this, because what occurred during the quarter was the program appeared to succeed. The remaining items did not; so the overall level fell owing to uncertainty. So we believe we can reach it, it's simply a question. That's the reason I say that stuff overtook us. You can consider it this way. That program works, the other products, roughly the underlying base, declined this quarter past where it had stood previously. And so what we'll attempt to do moving ahead is concentrate on those when it comes to product. Then regarding — we have a few concepts about reaching the customers, we keep advancing the notion of social media and releasing somewhat briefer videos, sort of a TikTok equivalent, a Snap-on network; we're attempting that, that generally performs well for us, though we may have done that regardless. I'm not certain, Luke. But I mean that's where we'd direct a portion of that...
Luke Junk
analystUnderstood. You've discussed the technician angle quite a bit when it comes to sentiment and how they're responding to what's going on out there, but what about the franchisees and the people you're devoting attention to? I suppose I'm specifically thinking about things such as cushion and the way they might be approaching working capital and their operations, whether that's inventory, payables, extended credit, that kind of thing?
Nick Pinchuk
executiveYeah. Well, I'd say it's down, but it doesn't look bad measured against pre-pandemic levels. So — and these are the very same franchisees. So I don't believe we really have — despite the fact that this isn't a thing we're celebrating or anything along those lines, it's barely menacing. It isn't enterprise threatening for Snap-on. Take a look at the cash flows. I mean, cash flow has dropped, but we aren't agonizing over it. We're attempting to determine where to obtain cash; we're not going to retreat from anything; and the majority of franchisees find themselves in that position. Now a few exist where the notion is, as always, down at the bottom end, they could be threatened under these circumstances. We attempt to collaborate with them to ensure they can make it through this situation. That's one more area where we'd invest time to try to ensure that terminations, the exiting of franchisees remain right in the same spot; and more or less, for government work, it has remained right in the same spot. It's simply that in this environment, it's somewhat harder to get people to move since everyone who could be a franchisee is, in fact, somewhat confidence impaired right now.
Patrick Buckley
analystCan you share a bit more about how dealers have been feeling lately — I suppose Liberation Day, and now the auto tariffs are more of a Q2 event. So is there anything worth pointing out there as the quarter gets going?
Nick Pinchuk
executiveWhen you say dealers, what are you referring to? Are you talking about automotive dealers?
Patrick Buckley
analystYes, and just demand for higher...
Nick Pinchuk
executiveSemi dealers?
Patrick Buckley
analystNo — it's the auto dealers.
Nick Pinchuk
executiveRight, right, so a dealer for Chevrolet, or one for BMW?
Patrick Buckley
analystYep, that's right.
Nick Pinchuk
executiveHonestly, I don't believe we noticed any specific shift there. The way I see it, when it comes to our ore, it truly doesn't, without a doubt, change anything what goes on with new vehicles. Not definitely. Actually, the dealers earn — and you likely know this well since I figure you're always watching dealers — they earn quite a bit from service and parts plus pre-owned vehicles; their profits from new vehicles are not that big. So should new vehicles run into tariff trouble and the automakers are bleeding heavily all over the ID, with tariffs flying both directions, it can happen and it barely matters, in my view, to the dealers. Sure, the dealers complain about lacking new vehicles, yet I recall during the pandemic, when new vehicles were scarce, their margins hit record highs, as I remember. Thus I don't believe being in the back shop hurts us that much. And when I speak with dealers, they'll complain about the fear that, gosh, if they can't obtain vehicles, they'll lose some — and if unevenly, they have fewer vehicles than, say, their local rivals, they could lose the customer bases they worked so hard to build. That sort of worry exists. But I don't believe in the short run, it matters much to our business with them. I don't believe they cut back; a few might, yet a few actually figure in such conditions they'd rather put money into and do more repair since new vehicles won't be available, so they must generate cash flow from repair. So at times they prefer to do that in such a scenario. So it's unpredictable in that scenario. I guess the single exception to that, Patrick, is that, insofar as we're commissioned by programs with the OEMs, that might be impacted by disruption with new vehicles and all this tariff commotion. We haven't observed it up to now, though.
Patrick Buckley
analystUnderstood, that's useful. Then I suppose when we look at the Tools Group, it appears the international segment came in somewhat above the U.S. Could you discuss perhaps a few of what's driving that, plus what you expect for the international segment?
Nick Pinchuk
executiveAbsolutely. Nothing else out there fazes the international segment. Donald Trump going on about Greenland, Gaza, the Panama Canal — none of that bothers them; at the grassroots level, truly at the grassroots level, it just doesn't concern them. The prospect of tariffs on China, 170% or whatever it is, or 245% — I don't know the current figure — I doubt that worries them much either. It tends to track with where they're located. Canada, for instance, is likely more concerned, since the back-and-forth with Trudeau and all of that, I believe, hit them somewhat. So — and — yet when you look at Australia, the U.K., they're somewhat offshore. Therefore I don't think we're seeing much impact in those markets. And that's basically due to the fact that this whole cash-rich confidence poor situation has, from the very start when it first appeared, been something we observe in the U.S.
Sara Verbsky
executiveWe appreciate everyone being here with us at this time. Shortly, a recording of today's call can be accessed on snapon.com. As we always do, we thank you for your interest in Snap-on. Hello.
Operator
operatorThat brings us to the end of this call. We appreciate you joining us for today's presentation. You're welcome to disconnect at this time.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Snap-on Incorporated transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.
Get the API View API docs →This call discussed
For developers and AI pipelines
Programmatic access to Snap-on Incorporated earnings transcripts and 132,000+ others is available through the
EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments,
full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.
More tools for stock research
OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Snap-on Incorporated or any ticker on your watchlist.
StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.