Snap-on Incorporated (SNA) Earnings Call Transcript & Summary

July 17, 2025

New York Stock Exchange US Industrials Machinery earnings 72 min

Earnings Call Speaker Segments

Sara Verbsky

executive
#1

Thanks, Chuck, and hello everybody on this morning's call. We're glad you could be with us as we go through Snap-on's results for the second quarter, all of which appear in the press release we put out earlier today. Joining us are Nick Pinchuk, who serves as Snap-on's Chief Executive Officer, and Aldo Pagliari, Snap-on's Chief Financial Officer. Nick is going to start things off this morning by sharing how he sees our performance. After that, Aldo will walk through our financial results in greater detail. Once Nick offers a few closing remarks, we'll open things up for your questions. As we normally do, slides are available to go along with our discussion; you can find those slides beneath the Downloads tab within the Web viewer, and also on our website, snapon.com, in the Investors section. Those slides, together with the transcript from today's call, will be kept on our website. Anything said on this call concerning management's expectations, estimates, or beliefs, or that otherwise addresses management's or the company's outlook, plans, or projections, counts as forward-looking statements, and actual results could differ materially from them. Information about the factors that might cause our results to differ materially from what those forward-looking statements suggest, along with additional details, appears in our SEC filings. Lastly, this presentation contains non-GAAP measures of financial performance, and those shouldn't be viewed on their own or as a replacement for the comparable GAAP measures. You can find more information about these measures in the earnings release we issued today, which is available on our website. So with all that covered, I'd like to hand the call over to Nick Pinchuk. Nick?

Nick Pinchuk

executive
#2

Thanks for that, Sara. Hello, everybody. In keeping with what we usually do, I'll begin this call by taking you through the key points from our second quarter. Let me say right off the bat: we find these results encouraging. They show resilience and balance amid conditions that have been quite turbulent. It feels like one unending chaotic moment, with the business landscape constantly in motion. Still, because of the resilient nature of our markets, the balanced makeup of our portfolio, and our product, brand, and people strengths, we made it through that roller coaster and ended the quarter in stronger shape than when we started it. That's my perspective; and throughout today, I'll provide additional detail on our financial results, our markets, the current state of the environment, the progress we made, and I'll share another interpretation of what I think it all means. Following that, Aldo will walk you through a more detailed review of the financials. Let's turn to the results. Sales totaled $1,179,400,000 as reported, even with a year ago. Including $8,600,000 from favorable foreign currency translation, organic sales were down seven-tenths of a percent. The results were mixed, yet balanced overall. In this quarter, Opco's operating income was $259,100,000, a decline of 7.6% from the prior year, and that prior year figure included $11,200,000 related to a nonrecurring 2024 legal win. Our OI margin stood at 22%, a drop of 180 basis points year over year, as last year gained from a larger basis points contribution tied to that legal matter. It's also worth noting that gross margin was 50.5%, only 10 basis points under last year, which reflects ongoing resilience. Rapid continuous improvement helped counter 50 basis points of unfavorable currency transactions. Essentially, the change in OpCo operating income stemmed mostly from what we're spending on a continuing basis to preserve and strengthen our edge in product, brand, and people. During the pandemic, we concluded the smartest path was to come out of the disruption operating at full capacity, and we think we're on track to get there. Moving to financial services, operating earnings were $68,200,000, down 2.8% from $70,200,000 a year ago. Combining that with the OpCo results, total OI margin for this quarter was 25.5%, versus 27.4% a year earlier, which included the legal benefit. This quarter, it was 90 basis points. Earnings per share for the quarter came to $4.72, which is $0.35 lower than last year. Within the 2024 results, $0.16 came from a legal payment made the prior year, while a 9-cent drag from higher pension amortization expenses showed up in this year's figure. Put another way, the EPS comparison between the two years absorbed 25 cents of headwinds; having said that, let's move on to the market. Those numbers capture what happened, but let's shift to the market. As we see it, the landscape for automotive repair remains favorable. Technician results were mixed, though they did get better. Inside the US network, the tools group delivered growth in the low single digits, while international vans came in flat. Based on what franchisees share with us directly through their notes, right from the field, I believe auto repair remains a fantastic sector to operate in, and the industry statistics continue to confirm it. Miles driven, average vehicle age, what households spend on repairs, the number of techs, and what they earn — every one of those metrics has risen. Naturally, the wider economy is still uneven. Even so, uncertainty around technology has eased; nonetheless, it remains substantial. Despite all this, the change in tools genuinely looks like it's building steam, and it's progressing past the initial phase. Our Q2 results demonstrate that clearly. We're pleased with where the numbers are trending. That's a favorable signal. Now to the automotive repair segment, the piece covering repair systems and information: the RSNI group is achieving encouraging progress, growing Snap-on's footprint among shop owners and managers, with especially strong outcomes in OEM dealerships. Things look steady there. Facility and equipment upgrades — as you know, OEM dealerships put money into bettering their facilities and equipment so they could match the rising complexity of new models. Right now, there are particular places where garage projects are encountering some pushback. Quite a few independent shops feel that waiting through this turbulent stretch is the smart move. Still, by and large, those shops understand that more complexity is on the way. Hard times lie ahead, and getting ready matters. Overall, sentiment stays constructive, and the RSNI figures reflect that everywhere. That's true for essential sectors as well. In this space, we saw hesitation and pushback during the earlier portion of the period. Liberation Day, together with the weeks immediately following, brought a great deal of turbulence to how projects got planned and executed. Many businesses decided to pause and observe, letting the trade program take form before acting. Delays happened. Yet as the quarter progressed, that initial shock gave way to what I'd call adjustment. Project Flow came back, and our order book has grown. Through the quarter, our key verticals picked up momentum, and although we believe the period contained a short-term shock, they remain a very attractive arena for doing business. Broadly put, I'd describe our end markets as continuing to offer opportunities that, from our perspective, have momentum. Challenges are genuine, and headwinds are present. On the earnings front, adjusted EPS came in at $0.16, up from $0.35, with a 35% margin. All the same, we're confident that what we bring to the table—our growing portfolio of products built for mission-critical work, our outstanding brand that represents the serious, the essential, and the professional, and our highly experienced team, capable, committed, and battle-tested—will get us past these challenges and keep us moving in the right direction. So with that, let's move to the segment. Early in the quarter, no segment was hit harder than commercial and industrial. That group does the most business abroad, naturally, and project work accounts for a large share of its critical industry vision. As a result, for Q2, the segment's reported volume dropped 6.5%, which includes $4,500,000 of favorable foreign currency translation, plus a 7.6% organic sales decline. C and I delivered operating income of $46,900,000, down $15,300,000 versus 2024. Operating margin was 13.45%. That's 320 basis points lower. Even so, we saw things get better as the quarter progressed. Customers were getting used to the environment. So we feel good about and stay committed to growing across the essential sectors; and moving forward we'll keep strengthening our position with C and I as we do the work, applying what we learn to create products that make the job easier. A great example is the upcoming version, our upcoming version of the upcoming generation quarter-inch drive fourteen four volts cordless ratchet. More power and more speed, 40 foot-pounds of torque to break stubborn fasteners free, and once they're loose, the tool's 400 rpm kicks in and the fasteners fly off. It saves real time. I'm working at the North Carolina plant. Just launched two models, with the CTRA 25 offering a compact frame and a CTRA 27 featuring an extended neck. Two tools built to maximize efficiency for techs handling hard-to-reach, out-of-the-way applications; and the tools carry other excellent features. The brushless motors deliver better durability and extended run time. The variable speed trigger hands the tech greater control. Stopping, you know, in that scenario the over-tightening that can harm components, and a ring of fire produces 360 degrees of daylight. Streaming out of six LEDs putting out 27 lumens, lighting up even a cavernous workplace. All of it works to make the job far easier. The 825 and 827 CTRs, with their compact frame and long neck versions, are a hit with technicians. They get why having both options matters. On top of that, adjusted earnings per share came in at $0.16, compared with $0.35 a year ago, a decline of 35%.

Nick Pinchuk

executive
#3

And once you take a serious recession into account, it's clear by now that these are on their way to joining our list of products earning a million dollars or more. The specialty torque business, in the meantime, remains incredibly strong. It truly delivered a good quarter. Part of the reason is that the variety of what we offer continues to expand. Adapting to meet the increasingly complex requirements of critical bolting and tensioning; and recently, we introduced the all-new CTM 550 unit. It joined — so it joined our growing family of cordless torque multipliers. Next to its bigger counterpart, the one-inch CTM 800, this tool is 66% lighter and occupies 20% less room; and it generates effortlessly; it generates torque starting at 160 foot-pounds and going up to 550 foot-pounds. It's ideal for tackling a wide range of tasks. Across a growing number of heavy-duty jobs where precise torque is needed. Because of this new tool, efficiency and comfort rise considerably. It replaces — it replaces the combinations of impact gun and torque wrench commonly employed, merging them into a single tool and eliminating quite a few, you know, cumbersome steps, offering a much safer and more ergonomic path to repair. This design combines the efficiency of our outstanding Norbard gear designs with the brushless motors from our power tools business to make difficult torque. To make accurate torque at high output, a breeze. And, you know, the unique Snap-on Advanced Cooling system, no pun intended, provides longer use and improved durability. The CTM also provides multiple connection options. Allowing the precision of the pre-procedure to be documented and reviewed so you know the job was done correctly and that the bus or semi-truck or bulldozer will operate as intended and safely and without failure. Our CTM 550 — refined, strong, adaptable, engineered with the durability to withstand the harshest environments while meeting the demands of what's critical; and as you'd expect, the response has been favorable. Well, that wraps up c and I. Absorbing the shock. Moving forward, delivering solutions that make critical work simpler, safer, and more productive. Now shifting to the tools group. Organic sales climbed 1.6%, with a low single-digit increase in The US and the international network flat compared with last year. Operating income reached $116,700,000, versus $114,800,000 in 2024, with an operating margin of 23.8%, unchanged from last year. Still one of the highest margin levels the group has ever achieved. Managed in spite of the headwinds. As I noted, technicians continue to be cash-rich but confidence-poor; they remain hesitant to lock themselves into long-term commitments. Originations declined 4.9%. Sales of items such as large tool, storage box, boxes fell in the quarter, though our ties with grassroots customers indicate the uncertainty has leveled off; and over the period, the tools group's shift toward faster payback items built — built momentum despite the continuing wars, the rapid-fire announcements in the capital, and the specter of inflation. In addition, per-share figures came in at $0.09 and $0.25. During the quarter, we never stopped. We moved production around. We redirected promotional and marketing efforts. And most importantly, we brought out new and innovative products with an immediate effect — items that delivered quick returns. On the servicing technology side, with comp sec service vehicles growing ever more complex, being able to get at things is crucial. Techs need help reaching into narrow spaces, squeezing in, and contorting themselves into small areas. They try to fix things without disassembling parts, components, fenders, grills, or dashboards. Every day, we're in the garage observing these tasks, coming up with solutions that make the job easier and increase profitability. That's Snap-on's fundamental approach to creating value — during the quarter, the tools group rolled out multiple new products. Every single one delivers unmatched access. And it matches what customers are looking for: faster payback. Take the SGA s one zero two, two, a two-piece radiator pick. Pick set. Each unit is seven inches from handle to tip. And it has a unique design. One is hook-shaped, great for pulling hoses away, while the other is straight. Perfect for prying coolant lines loose. The whole set is produced at our l in our Oakmont, Alabama site; and, you know, it might seem small, I assure you, today's vehicle engine bays are incredibly packed. Hoses aren't out in the open anymore. And right now, even basic repairs typically require re require removing fan shroud shrouds or assorted other components. Still, with these tools, a tech can extract the hose with no trouble. Standard configurations share similar geometries, but they demand much more space to operate. Our new picks deliver great access and they save considerable time, and a text of notice. Another quick return is our f k c 72. A three-inch h drive, stuffy length, hand ratchet. Built at our Elizabethton, Tennessee facility. It's our, smallest three h interaction ever. I mean, it's tiny. About the size of your pinky; and, you know, there are plenty of tight corridors inside the car. Well, with this stuff, you can get anywhere your fingers can. Yet even though it's small, it offers tremendous strength thanks to Snap-on's special dual pull system; and the 72 tooth design permits five degrees a five-degree swing art yet another access facilitator; and the sealed head improves dependability, keeping debris that can clog the works from entering the gear mechanism. It's another snap-on essential for Sirius Tech, and it helped drive the pivot in the core. Possibly the best part, just launched, the revamped 15-inch extra-long needle nose plier set cold forged at our Milwaukee plant. Now that's a procedure that's hard to man to master. Yeah. But if you nail it, Milwaukee's among the few who can, it yields superior strength and provides tighter tolerances without extra and pricier machining. The long the long plier neck reaches into confined openings, creating access. And the cold forging method and the related shaft strength permitted 85% more gripping power compared to other models. All this at just $0.09 to $0.25. So this device ends up being a genuine time-saver in real time. What I'm saying is, when you place a component down into a recessed area, you don't have to disassemble the work at all. These machines will move around in confined spaces, grab that misplaced component, and grip it firmly — which guarantees quick securing and quick retrieval. That's an enormous, fantastic advantage. Each of these new products makes jobs easier and repairs faster. On top of that, all 3 have now hit what we call our $1,000,000 hit product status. During last quarter's meeting with tech, we covered this, particularly when it came to the cheaper end of the higher-priced goods. After our discussions with the techs, who told us they want tool storage with faster payback, our Algona, Iowa plan rolled out a distinctive entry-level KRA twenty-four twenty-two classic series roll tab. Doctors, 55 inches wide. It's built as one welded piece with reinforced corners and a 14 gauge steel bottom panel that can hold a payload of 2,400 pounds. Over a ton of tools. It's ideal for structuring a tech investment, with the 2 drawers running 50 inches wide — one five-inch deep for deep sockets, plus a three-inch drawer designed to hold long flybars and extensions. The box performs nicely. Solid, and it's reasonably priced; but what really grabs your eye in this hooray is the array of gorgeous two-tone paint schemes. And one more point on pricing: $0.09 to $0.25.

Nick Pinchuk

executive
#4

To start, my personal favorite is a black case with bright green doors and black accents. I'm telling you, it's vivid. With that glowing box in this space, any technician would stand out. Siri just came out, and demand has already been significant. So that's the tools segment. Now shifting. We're gaining despite uncertainty. Returning to growth, we ended the quarter with momentum, and strong American-made goods were the primary catalysts. Turning to RSNI. Second-quarter sales came to $468,600,000. That includes organic growth of 2.3%, a high single-digit increase in diagnostic information, and robust double-digit gains in our OEM operations. For RS and I, operating earnings reached $119,800,000, which is $6,200,000 higher, or 5.5%. Our operating margin came in at 25.6%, which is a 60 basis point improvement over February 2024. Here's an interesting little tidbit: over the past 13 quarters, the OI margin for RS and I has gone up year over year in 12 of them. Sixth Street — that reflects the RISE software along with the strength of RCI. Arsenide really stands out amid the turbulence as we draw on our customer connection and bring innovative products to market. Take, for instance, what we call Triton, which originated at our San Jose facility. Sitting at the heart of our intelligent diagnostics lineup, it creates a wireless link between the vehicle and the handheld device, so technicians can roam freely throughout the bay, beneath the car, inspecting, troubleshooting, and testing with no restrictions. That matters a great deal. It accomplishes all of that while keeping the incredibly fast performance that our wired device is known for. Now, with this two-channel lab scope, you get zoom functionality, and that really matters. Waveform glitches can occur in an instant, and that's frequently the case, making them tough to detect with a typical unit. With Triton, customers can now capture and replay the test, enlarge the waveform, focus on what's irregular, and pinpoint intermittent issues. Exactly. Consider the flexibility, the speed, the zoom feature, eight hours of battery life for longer sessions, and four times the memory. It manages more procedures and data than it ever has before. This launch significantly outperformed earlier ones. Like you'd probably figure, this incredible platform packs a punch when techs get their hands on it. In shops, it comes out ahead by a wide margin. Arch and I have real momentum going. Excellent diagnostic tools, strong databases, repair info that Mitchell Pro customers want, plus the special strength that comes from intelligent diagnostics. A shop management system that works well, moving up quarter after quarter, powered by top-tier hardware, a real edge from the software side, and commitment to RCI. We intend to keep pushing forward and growing RS and I's standing. We're giving repair shop owners and managers additional new offerings created through our value creation process, and we believe this approach wins. So that wraps up our second quarter. One defined by difficulty as well as progress. C and I declined. We felt the hit from liberation day’s shock and a stretch of hesitation, though things are starting to bounce back as several factors come together. In the tools group, the shift toward faster payback projects is picking up momentum, with organic sales rising 1.6%. Operating income margin came in at 23.8%, unchanged from a year ago, yet it still counts as this group’s third-highest result ever. Now for the wins: at RS, working alongside me, revenue increased 2.2%, while operating income margin hit 25.6% — a gain of 60 basis points. Software continued its expansion, and RCI delivered again. All of it combined to bring total revenue to $1,179,400,000, which was flat. Gross margin was 50.5%, down 10 basis points. Negative currency transaction effects and consequences from volatile trade policy were offset by RCI; operating income margin landed at 22%, a drop of 80 basis points once last year's legal benefit is factored out. This mainly shows our determination to continue funding product, brand, and people. These results prove operational resilience. All of it was delivered under tough circumstances. It was a quarter that gave us encouragement. I'll now hand things over to Aldo.

Aldo Pagliari

executive
#5

Thanks, Nick. Slide 6 gives you an overview of our consolidated results for the second quarter. Net sales came in at $1,179,400,000, flat versus last year, as an $8,600,000 decline in organic sales was fully offset by favorable currency translation. We saw growth in our automotive repair markets, gaining share in the franchise van channel, with OEM dealerships, and among owners and managers at independent repair shops. On the industrial side — that's our C and I group — sales were down from a year ago, reflecting the economic and geopolitical uncertainty we saw throughout the period. Consolidated gross margin was 50.5%, compared to 50.6% last year. That included 50 basis points of unfavorable currency, partially offset by benefits from the company's RCI initiatives. Snap-on is relatively well positioned in today's tariff environment, since we largely manufacture products in the markets where they're sold. That said, trade policy can affect our costs. In the quarter, we offset the impact of higher tariffs through tight management of material and other expenses, so gross margin saw no material impact. As for the unfavorable currency impact this quarter, a significant portion came from transaction effects related to the Swedish krona strengthening against both the euro and the US dollar versus a year ago. That matters because our Swedish manufacturing facilities support the C and I, RS and I groups equally. On the C and I side, we make cutting tools for European and emerging markets, while on the RS and I side, our car aligner plant produces collision products sold globally. Operating expenses as a percentage of net sales rose 170 basis points to 28.5%, up from 26.8% in 2024. The main drivers were an $11,200,000 nonrecurring benefit from legal payments received last year, along with higher personnel and other expenses, including continued brand investment. For the quarter, operating earnings before financial services were $259,100,000, down from $280,300,000 in 2024. Operating margin excluding financial services as a percentage of net sales was 22%, compared to 23.8% a year ago — and that prior-year figure included a 100 basis point benefit from those legal payments. Moving to financial services, second quarter revenue was $101,700,000, up from $100,500,000 a year earlier, and operating earnings were $68,200,000, down from $70,200,000 in 2024. On a consolidated basis, operating earnings were $327,300,000, versus $350,500,000 a year ago. Operating earnings margin was 25.5% of revenues, compared to 27.4% in 2024, which again reflects a benefit related to the legal matters. For the second quarter, our effective income tax rate was 22.6%, versus 22.5% in both 2025 and 2024. Net earnings were $250,300,000, compared to $271,200,000 in 2024. Taking a closer look at the segments, the Commercial & Industrial segment posted a margin of $5.07, or 17.5%, while the Repair Systems & Information segment came in at 21.2%, and the Financial Services segment delivered 9.1%, with a residual contribution of 0.7%. During this quarter, diluted earnings per share came in at $4.72, compared with $5.7 per diluted share in the equivalent period a year ago. If we compare this quarter's EPS with last year's second quarter, we find 25¢ per share of headwinds on a year-over-year basis. In the three months that closed in Q2 of 2025, our diluted EPS figure reflected an impact of roughly nine cents per share from higher nonservice and net periodic pension expenses relative to a year earlier. The primary factor behind that was greater amortization of actuarial losses. Meanwhile, the same period in 2024 carried a benefit of 16 cents per share connected to legal payments. Now let's move to how our segments performed during the quarter. Turning to the C and I Group, shown on Slide seven: revenue reached $347,800,000, against $372,000,000 the prior year, a 7.6% organic sales decrease. Favorable foreign currency translation of $4,500,000 partly offset that decline. Within the organic reduction, the segment's hand tool businesses based in Asia Pacific and Europe each posted double digit decreases, and activity with customers in critical industries fell at a mid single digit rate. Partly balancing those results was a high single digit gain in the specialty torque operation. Broadly speaking, the lower sales reflect a pullback in certain cross border sourcing activities along with the present trade situation. In addition, we saw customers pull back on projects in certain sectors and regions, such as US aviation and the military. When it came to critical industries, April brought softer demand, though conditions improved as the quarter progressed. For the second quarter, gross margin landed at 40%, down from 41.7% in 2024. Lower sales volumes were the main driver of that drop, along with 50 basis points from unfavorable foreign currency effects, though these were partly offset by savings from RCI initiatives. Operating expenses represented 26.5% of sales this quarter, versus 25% a year ago, mostly because of the smaller sales volumes as well as higher personnel and other costs. The C and I segment posted operating earnings of $46,900,000, compared with $62,200,000 in the prior year. Our operating margin came in at 13.5%, which is down from 16.7% in 2024. Now let's move on to slide eight. Over at the Snap on Tools Group, we saw sales of $491,000,000, up against $482,000,000 during the same period last year. That figure represents a 1.6% organic improvement along with a $1,200,000 benefit from favorable foreign currency translation. The organic growth was driven by a low single digit uptick in our United States business, while activity across our international operations stayed basically flat. Throughout the quarter, we feel our continued pivot toward shorter payback items paid off by helping us get past the persistent uncertainty that technician customers are showing in today's climate. On gross margin, we dropped 50 basis points to 48.3% for the quarter, compared with 48.8% a year earlier. A big chunk of that — 40 basis points — came from currency swings working against us. Turning to expenses, they equaled 24.5% of sales this quarter, which is 50 basis points better than the 25% we saw in 2024. The improvement is mostly about selling more. Over at the Snap on Tools Group, operating earnings hit $116,700,000, compared with $114,800,000 the year before. Operating margin was 23.8%, unchanged from 2024. Now let's turn to the RS and I group, which is on slide nine. Sales came to $468,600,000, against $454,800,000 in 2024. That includes organic growth of 2.3% plus $3,100,000 from favorable currency translation. Inside that organic number, business with OEM dealerships grew by double digits, and sales of diagnostics and repair information products to independent repair shop owners and managers were up a high single digit percentage. Even so, that was more than enough to offset a high single digit decline in undercar equipment sales, which includes collision repair products. Gross margin was 46.8%, 130 basis points above the 45.5% posted a year ago. The biggest drivers were stronger sales of brides, which carry a higher gross margin, along with gains from RCI initiatives. Partly offsetting those were higher material, freight, and other costs, plus 40 basis points of negative currency impact. Operating expenses as a percentage of sales climbed 70 basis points, to 21.220.5% in 2024, mostly on higher personnel and other costs. For the RS and I group, operating earnings were $119,800,000, versus $113,600,000 the prior year. Our operating margin was 25.6%, 60 basis points above the 25% recorded in 2024. Let's move to slide 10. Financial services revenue was $101,700,000, an increase of $1,200,000 from $100,500,000 a year ago. Operating earnings for financial services totaled $68,200,000, versus $70,200,000 in 2024. Financial services expenses were $33,500,000, compared with $30,300,000 last year. That increase is mainly due to $1,500,000 in higher provisions for credit losses, along with a rise in personnel and other costs. Measured against the average financial services portfolio, expenses were 1.3% in the second quarter of twenty twenty five and 1.2% in 2024.

Aldo Pagliari

executive
#6

During both 2025 and 2024, finance receivables produced average yields of 17.517.7% and 17.517.7%. Contract receivables, on the other hand, delivered average yields of 9.18.9% and 9.18.9% across those same periods. When it came to total loan originations, we hit $293,000,000 during Q2 — a figure that fell $15,100,000, or 4.9%, compared with what we saw in 2024, and within that, extended credit origination was down 5%. That pullback in extended credit originations largely comes down to weaker sales of discretionary big ticket items such as tool storage, though it was partly offset by more originations driven by the successful launch of the new 11. On our quarter end balance sheet, gross financing receivables sit at approximately $2,500,000,000, and $2,200,000,000 of that total is attributable to our US operation. When we look at extended credit or finance receivables, the US sixty day plus delinquency rate came in at 1.8%. That figure is 20 basis points above where it stood in the second quarter of twenty twenty four, but it's 20 basis points below what we reported in the prior quarter. For the overall extended credit portfolio, trailing twelve month net losses totaled $69,500,000, which works out to 3.4% of outstanding balances at quarter end. In light of the current environment, we view these portfolio performance metrics as still fairly balanced. Moving on to slide 12. Cash provided by operating activities during the quarter was $237,200,000, versus $301,100,000 a year ago. This reduced cash flow generation relative to 2024 mainly reflects larger year over year increases in working investment along with lower net earnings. Investing activities consumed $46,000,000 in net cash, which was primarily driven by $26,400,000 in net additions to finance receivables along with $19,700,000 in capital expenditures. On the financing side, $170,900,000 in net cash was used, a figure that encompassed $111,800,000 paid out as cash dividends as well as the buyback of 250,000 common stock shares for $79,000,000 through our existing share repurchase program. When the quarter closed, our existing authorization still left room to buy back as much as another $357,900,000 in common stock. Moving to Slide 13, trade and other accounts receivable grew by $26,800,000 relative to the close of 2024. At sixty five days, day sales outstanding came in one day lower than the prior quarter on a sequential basis, versus sixty two days when 2024 ended. Stock levels rose $54,300,000 compared with the close of 2024, driven mostly by $37,400,000 in currency translation plus certain investments aimed at reducing supply chain risk. Measured over the trailing twelve months, inventory turns came in at 2.4, matching where they stood at the end of 2024. Cash at quarter end was $1,458,300,000, versus $1,360,500,000 at the close of 2024; alongside the cash we already hold and anticipated operating cash flow, over $900,000,000 remains accessible through our credit facility. Nothing was drawn or left outstanding under the credit facilities during the year, and no commercial paper was issued or outstanding during that period. That wraps up what I have to say about our second quarter results. Now let's go over some guidance points for the rest of the year. On the corporate cost side, our current expectation is that quarterly expenses through the remainder of 2025 will come in at around $27,000,000. Beyond that, as we've noted previously, we expect to continue absorbing higher nonservice pension expenses of about $6,000,000 on a pretax basis each quarter during 2025, driven largely by a larger actuarial loss; these noncash costs appear below operating earnings, in other income and expense net. On the earnings statement, that translates to an impact of approximately negative 9¢ per diluted share on EPS every quarter for the balance of 2025. We expect capital expenditures to come in near $100,000,000, and right now we foresee our effective income tax rate for the full year 2025 landing somewhere between 22 and 23%. That anticipated range, which takes into account The US tax bill that passed not long ago, remains the same as what we projected earlier. Lastly, during 2025, our fiscal year will include fifty three weeks of operating results, with one extra week falling at the close of the fourth quarter. That happens every five or six years, and in the past, it hasn't materially impacted our total revenues or net earnings for either the full year or the fourth quarter. I'll hand the call over to Nick for his closing thoughts. Nick?

Nick Pinchuk

executive
#7

Thank you, Aldo. Our second-quarter performance at Snap-on showed durability, a balanced lineup, absorption of the shock, and forward movement. C and I. Markets abroad and essential sectors were thrown off balance by Liberation Day. That jolt transitioning into adjustment, and adjustment amid the storm. Or into the storm. Organic growth came to 1.6%. The US was higher. Overseas was unchanged. Back into positive territory. OI margins stood at 23.8%, level with a year ago; yet this ranks among the best the group has ever posted. RS and I, ongoing momentum. Sales climbed 2.3% on an organic basis. Opco OI margin reached 25.6%, a gain of 60 basis points. Climbing once more. Taken together, these results add up to a demonstration of how we performed while conditions were unsettled. Our company-wide revenue reached $1,179,400,000 — essentially flat, which makes sense given how tough things were. For Opco, the operating income margin stood at 22%, which is a decline of 80 basis points after you strip out the legal gain from a year ago; that gap largely reflects spending to keep staffing at full levels and to hold onto our competitive position until the turbulence eases. Earnings per share landed at $4.72, and that's against a comparison that included a 25% 25¢ drag. In our view, these numbers reflect the strength we have overall, and they also make clear the edge we hold relative to others while trade policy remains volatile. That advantage rests on how we operate — building in the same markets where we sell — and on our extensive footprint of facilities spread across many locations. We've got 36 factories, and 15 of those are located in The US, giving us a wide-ranging set of capabilities. We make some version of our products in just about every part of the world, though The US stands out in particular. That advantage, we believe, shows up clearly when you look at gross margin for this quarter. It came in at 50.5%, which is 10 basis points lower than the same period last year; however, 50 basis points of unfavorable currency fluctuation, which RCI countered, more than explains that difference. As you know, we said we didn't think tariffs would cause us much trouble. We weren't kidding. And looking ahead, we're confident that as the shock wears off, we've got momentum on our side. We also have a strength that comes straight from what we make, always matching the growing complexity of the job while cutting out hassle. There's a strength in our brand, one that genuinely signals the professional and carries both individual and shared pride and dignity. And naturally, there's a strength in our team — dedicated, capable, battle-tested, and using the Sapphire Valley creative methods to improve each day, just as they demonstrated this quarter. So our view is that moving ahead, by leaning on those capabilities that are part of who we are as a company, we will get past the challenges, seize the many opportunities in front of us, and keep moving forward through the remainder of 2025 and well beyond. Before turning things over to the operator, I want to speak straight to our associates and franchisees. I'm aware that a large number of you are on the line. To all of you, the positive outcomes we just went over came from the work you've done. Both those who are here now and those who came before. You have my congratulations for how you pushed forward despite the turbulence. You have my admiration for the energy you bring to our enterprise every day. And you have my thanks for your confident and unwavering commitment to our future; now I'll turn the call over to the operator. Operator?

Luke Junk

analyst
#8

Morning. Appreciate you taking our questions. Nick, I'd like to begin with the significant change we're observing in the tools segment from Q1 into Q2. Looking back, is there anything that stands out to you as, shall we say, less typical during the first quarter in tools, or perhaps certain spots where you were caught somewhat off guard given these conditions? Considering Q2, things now seem far more typical. Regarding how the company can steer through this disruption, what do you believe was the key focus for internal execution this quarter? And should we expect that you'll push even harder on it during the back half of the year?

Nick Pinchuk

executive
#9

Well, part of it was, I believe the technicians — I think you noticed some signs that technicians faced greater and growing uncertainty in Q1 compared with the prior quarter. You observed consumer sentiment falling from December to January by, I believe, 20 points. The lowest since '22, since the last peak. You know, issues with supply chain. And it remains down, though it has recovered somewhat. I'd say the administration's early days startled the grassroots; so our pivot was proceeding. Better. You know, which had been underway, but that startling, that 20 basis — I reflected it in the 20 basis points, and I don't intend to link it precisely to that. Really outpaced the pivot. But it kind of leveled off. They aren't impacted as much by tariffs. You know, liberation day didn't hit them as much. So they're mostly just sitting there, and then little occurs, really. And the way that, I suppose, the bombing of Iran occurred, but not that much. And we began to make headway on that; that's what took place. I guess the single lesson we picked up in Q1 that we used in Q2 — you may recall that I mentioned in Q1 that I think we can nibble into the lower end of the big ticket items like the solace in Q1 with salute to solace was quite successful. And we sold some heavy-duty cards in Q1 that were economical. So we did more of that in Q2. I discussed it on the call — that classic series with, you know, a box that gives you, you know, cheaper than, you know, the other series. And holds a ton of tools. And has these eye-popping colors. That was quite popular. So I think we learned we can add to the pivoting beyond the obvious things, like hand tools, power tools, and other stuff like that. Sort of eating at the bottom end of the big line and focusing on that. And I think that's among the actions we took. I'm not certain that continues to be effective, since you've always got to try some other approaches. Still, I believe the shift is functioning fairly effectively at present, and I think we've got a moment here. I've mentioned this during this call: we came out of the quarter in a stronger position than we were in when it began.

Luke Junk

analyst
#10

How about where loans get started, Nick? And creating interest in fresh credit? In your prepared remarks, you brought up how diagnostic units are helping, and that the drop in originations is easing compared with the prior quarter. Still, do you see a chance to push franchisees to embrace credit more as we move through the second half of this year?

Nick Pinchuk

executive
#11

No. I have no better idea than you do. I really don't. You follow what I'm saying? Here's my take. I believe this much. Originations came in stronger. Right? As the saying goes, good enough for government work — we're down by half as much. That's a great way to put it; the decline is half what it was in Q1. This quarter I think the fall is bigger — originations are off 4.8%, 4.9%. And sure, those numbers were somewhat inflated because we launched the Triton. So tool storage is likely down by more than that figure suggests. Still, I can't say how this plays out ahead. Customers will need some time to adjust, in my view. But remember what happened during the pandemic — and that ties into what I was saying about the CNI shock question. It's similar to a pandemic-type event. Everyone was stunned. The technicians, I'd say, have been in shock for some time now. Eventually, nothing new occurs, and they begin to adapt. Then they start thinking, well, I was nervous, yet nothing bad actually hit me. My pay keeps rising, and I begin telling myself I can handle a bit more, I can move myself toward more typical circumstances. So my expectation is that this improves down the road. On top of that, I genuinely believe our pivot execution is stronger. We keep getting better and better and better and better and better. That benefits us. Whether originations must bounce back immediately, I'm not sure. But my view is that in time, assuming nothing major occurs, folks will settle down even further, and they'll return with a rejection. That said, I'm not forecasting anything of the sort for the coming quarter. As you're aware, Luke, I'll repeat this since I've mentioned it every third quarter: Q3 is invariably squirrely. It's tougher to call than any other, because the SFC falls inside that period, and that stirs up a level of turbulence nobody can foresee; so we'll find out how it unfolds. Even so, I'm pleased with the direction we're headed. That much I'll tell you.

Luke Junk

analyst
#12

The figures make that clear. Aldo, could we maybe rewind one turn and get a sense of the main end market movements inside Critical Industries and C and I? It was noted that momentum exiting the quarter was far stronger compared with that more COVID-like shock. Could you give us a sense of where that run rate stood directionally? How near was it to reaching the plan?

Aldo Pagliari

executive
#13

Generally put, Luke, April ran considerably slower than how the entire quarter ultimately came in. Thus, as I mentioned, things got better as the quarter progressed. The largest shifts, I would say, showed up in aviation and military-related non-defense, that sort of area; yet general industry also began to get better. So once more, still well down during the quarter. Began to notice a few indications of improvement.

Luke Junk

analyst
#14

Understood — I'll stop here. Thanks.

Sara Verbsky

executive
#15

Our following question comes from Gary Prestopino of Barrington Research. You may proceed.

Gary Prestopino

analyst
#16

Good morning, all.

Aldo Pagliari

executive
#17

Morning.

Gary Prestopino

analyst
#18

Did you mention the currency translation effect on EPS for the quarter? In your remarks?

Nick Pinchuk

executive
#19

No, I didn't.

Gary Prestopino

analyst
#20

Would you like to know?

Nick Pinchuk

executive
#21

Yes. I would.

Gary Prestopino

analyst
#22

All right, $0.06. Understood — a negative $0.06. Fine, appreciate it. Now I have a few things to ask. RSNI posted quite a solid increase, and you brought up our new Triton platform.

Nick Pinchuk

executive
#23

Right. Would you mind expanding on that a bit? Also, what are the price points, and how does this differ from what we previously offered in the market?

Gary Prestopino

analyst
#24

Okay, Gary — to be honest, I can't give you a definitive answer on what that price point actually is. Fine, let's just say roughly $4,500. In that vicinity. $4,500. It could be — I genuinely have no idea how we would ever move it at that figure, but fine. Somewhere around there. It moves around, you understand. Numerous factors come into play. Which items get discounted? Which ones don't? Even so, let's put it at somewhere in the 4,500 to 5,000 band, that sort of range; it falls right in the middle of where the intelligent diagnostic lineup sits. Just under Zeus and just over Apollo. What makes it distinct boils down to this: no cord is needed — it runs wirelessly instead of via a cable. The truly remarkable thing is that with our corded models, the signature characteristic was how closely they mimicked lightning. You'd hook them up, switch them on, and they'd come alive instantly. This unit, on the other hand, is ready the second you power it up. And it has no cord. So you receive the flexibility that comes from having no wires together with the speed — that instant startup you'd expect from a corded device — and honestly, that's quite impressive. Beyond that, there's one more thing: a Zoom feature is integrated into these units, and every one of them includes dual-channel scopes. Here's the process: hook the scope up to a vehicle, then watch a waveform right here. The problem, however, is that now and then the problems inside that vehicle are super intermittent and occur extremely quickly. They show up only momentarily, so catching them in passing is difficult. You've got to move slowly and zoom in completely to catch tiny glitches. Thanks to the zoom function, you can freeze the screen and navigate inward. At first, you know, that waveform is a live, shifting thing. So then you grab it, halt it, enlarge it, and spot those glitches — that's an enormous help. Beyond that, you get an eight-hour battery, so it keeps running for quite a while, and that, you know, makes the device genuinely pretty practical. Another distinction, I'd say, is memory that's four times larger. With quadruple the memory, there's capacity to store tons of material — you know, plenty of waveforms, plenty of procedures, plus lots of data flowing in from other sources. That's a major plus. The technicians truly like it. I, you know, I was recently in Connecticut and Atlanta spending time with franchisees — having dinner with quite a few of those folks. So every franchisee is really supportive of it — they enjoy presenting it to customers. The technicians seem to be fans too. That leaves us feeling good about it; the launch went pretty smoothly, all things considered. We'll monitor how it progresses; either way, we're pleased with it. It is, in fact, moving the needle — contributing something like 0.1% to 0.3%. Great, glad to hear that. One last item — regarding the C and I segment, I believe you mentioned things were sluggish internationally. Was the US the same? I don't have a clear breakdown of how your US and C and I exposure splits, so I'd like a better picture.

Nick Pinchuk

executive
#25

Sure. Gary, when we look at the government portion, C and I essentially splits down the middle—50% from North America and 50% from outside the U.S. Beyond that, Europe represents the largest chunk, at most. When it comes to Asia, as we've mentioned before, we aren't taking in anything at all from China. The reason is those 170% tariffs—a 170% rate. Do you recall when they hit 170%? We simply said no. So at present, Asia is extraordinarily, extraordinarily turbulent. Beyond that, you've got additional markets in disarray, such as South Korea—they just detained the former president, and everyone's in an uproar. Then in Thailand, they just branded the former—the new prime minister a traitor and removed her from office. Asia is genuinely volatile at the moment. I went there not long ago, and the conditions in those markets are quite bleak. Consider Europe—well, Europe has returned to a cross-border scenario; their GDP numbers indicate the UK at 0.1%, Germany at 0.3%, and Spain at 0.5%. Europe certainly has its difficulties. From where we sit, we're definitely seeing that. Shifting to The United States, what's happening there largely reflects the European and Asian operations. Most of that activity falls within c and I. Beyond that, there's the industrial side. Correct? Inside the Industrial segment, you have pick-and-ship operations — those are fast, basically off-the-shelf items, somewhat similar to what exists in the tools category. Then comes the project side of the business, and that makes up a significant share of what they do. So imagine this: Liberation Day shows up, and tariffs are on the way. Except in April, the rates on China changed three different times. After that, Vietnam gets hit with 46%, and then the reversal comes — actually, forget that, it'll be 10% through July 9. Once July 9 arrives, the figure turns into 4020%, though they concede they aren't sure. Since that 20% applies to simple, ordinary business, while transshipment makes up 40%, you end up with this scenario where people look at it and describe it as a fascinating sort of phenomenon. I'd liken it somewhat to the pandemic — not an exact match, but there are similarities. When you have projects in front of you and you're deciding whether to proceed, the reasoning goes: I won't commit too much, because there's no way to know what the world will look like. My feeling is we're close to a point where things will resolve themselves before long. The result was that people kept hesitating, especially during the early part of the quarter. Right? And they were essentially saying, wow, I'm not prepared to take that risk. I'd come off as an idiot if I got this wrong. And you could see some of that play out in how things function. Especially on a project. Yet in spite of all that, our orders kept getting stronger. People just weren't pulling the trigger on shipping. So from our vantage point, the order book is in solid shape. The one snag is that everyone has to figure out their own approach to the tariffs, and they're gradually getting there, the same way they did back in the pandemic. That's precisely what happened with the pandemic. At first, people panicked. Right? Yeah. Bit by bit, everything started coming together, exactly as you saw with the pandemic, ticking up 0.1% and 0.3% along the way. K. K. Okay.

Gary Prestopino

analyst
#26

Thanks a lot for that.

Nick Pinchuk

executive
#27

Our following question is going to come from Christopher Glynn.

Christopher Glynn

analyst
#28

Thanks. Yeah, that prior topic had a lot going on, but maybe just a quick clarifying question. Your description of things improving through the quarter appeared to center partly on critical industries and the scheduling of US projects, but I think you said it actually spread across APAC and Europe. So I just want to verify that the upturn really did touch all those areas.

Nick Pinchuk

executive
#29

No. No. What I brought up was maybe somewhat related to Europe. Asia is a different story. Asia is going to need much more time to work through. Isaac. Because, like I said, you've got political instability in quite a few places; on top of that you've got China, which is a basket case. China is really screwed up. So all of that is happening in Asia. And on top of that, you've got cross border flows, and everybody is trying to figure out what to do, us included. We aren't taking tariffs, but we have to figure out what to do about our customers in China. If we don't want to use them in The United States. And we sell in Asia. So we've just got to, you know, help them out somewhat. But I don't think that gets settled just by the liberation day situation. Europe is more like that. But in our last discussion, I was really talking mostly about the critical industries business and their project-based business. That's what I meant. When we talk about Chris, when we say we came out of the quarter stronger than we went in, we kinda mean the tools group too. We mean, and if I could do me the tools, so we're actually talking about C and I and the tools group. But at C and I, it's most pronounced; in the industrial business, which by the way, is the big Kahuna engine in the C and I business. That figure came in at 2.4%.

Christopher Glynn

analyst
#30

Great. Thank you. That's quite clear. Now I'm curious about capital. You're sitting in a solid net cash position at the moment. Do you have any thoughts regarding where the acquisition pipeline stands, plus an update on what kinds of focus inorganic business development efforts have had recently?

Nick Pinchuk

executive
#31

Absolutely; there's a whole lot of things we're examining. I mean, as you're aware, it's hardly a secret that we've got a fairly broad landscape, or you could say a set of acquisition targets we review on a continual basis. And typically, there isn't a great deal available within the tool group. These days you probably aren't looking all that much at Asia, since nobody really has a clue what will unfold over there. Right? So what you're really discussing is growing the repair shop owners and managers, or the critical industry; those are more or less the spaces you're searching in. And we're examining a number of spots. Right? Occasionally, once we peel the onion, it turns out like, hey. These companies are merely 20 or 30% off, and the remaining pieces don't appeal to us. Occasionally—and in this scenario, naturally, you want to proceed quite cautiously. Right? You don't want to buy something and then wake up and realize, woah. The tariffs aren't looking so favorable for these folks. Right? So you want to be extra careful during due diligence. I'm not claiming to offer any forward-looking view on that; it's simply a bit of color. In this scenario, I believe, you might land that bargain, yet you're uneasy about what you could end up buying. Right? You want to be extremely careful with due diligence. And we are. We look after our money.

Christopher Glynn

analyst
#32

All right. Then on SOT — it sounds as though sentiment has lifted from its lowest point, with attitudes finding some middle ground. There. And your pivot efforts are ramping up nicely. I just wanted to check whether anything else played a part — you know, how sell-in compares with sell-through, and was there any replenishment or perhaps pricing-driven pull forward that had an effect?

Nick Pinchuk

executive
#33

None of that, in my view. Honestly, our pricing stayed fairly typical. We may have seen somewhat more pricing activity in Canada than usual. Possibly, you know, given what's going on there. Whenever tariff issues arise, we always have the option to raise prices and, you know, but by and large, we push back against that sort of thing. Some of that might show up in Canada, but — and Canada, in fact, did fine during the quarter; so it wasn't hurt. I don't believe — I don't — I think you saw it. I mean, I think the international business was sort of mixed. And so it came in flat. I believe the headline is that the US was up. And the pivot drove that. Hand tools did quite well. And — and — and diagnostics did quite well too; so those two areas capitalized on the situation, and we're happy with that notion. And I think, you know, we felt, you know, when you examine how the quarter was structured for the tools group, we came out of it stronger. That's all — it's done. That isn't a forecast. I've already stated that the third quarter is unpredictable. You know? But on the whole, I'm pleased with the path we're on there. It appears — and — and I think it comes down to this. We've been pivoting; we're improving at it; but — but the — the uncertainty has more or less settled. So when uncertainty settles, each month, we make headway against it; through the pivot. Each month. Great.

Christopher Glynn

analyst
#34

Absolutely. I appreciate that.

Scott Stember

analyst
#35

Morning, and thank you for fielding my questions too. To make sure I have this right, I believe someone raised the matter of selling into the channel versus sell-through. If I caught that properly. Could you address tools — I realize a great number of new items have launched — moving into the channel versus moving off the van during the quarter?

Nick Pinchuk

executive
#36

Yes. Here's the thing. My sense is those two are roughly equal. The sales — the sales off the van came in just a touch under. Of course, you'd anticipate that when you've got the sort of situation — as I've explained to you, we exited in a stronger spot than when we came in — so that means stuff needs time to work its way through the van and to — so as a result, that sort of impact would show up on its own. Broadly speaking, we have not observed turbulence. Across all this turbulence, we really haven't seen much deviation, you know, if you examine longer stretches. Within that sort of perspective, a quarter amounts to a small blip. You follow what I'm saying? It hinges on what gets launched. The timing of the launch, the timing of when it reaches our bands, and then the timing of when it — you know? So many factors of that nature come into play. So my take is they're fairly well matched this time. Yeah. Like I mentioned, the real figures are somewhat reduced, yet that's the natural thing to expect considering how we've characterized the quarter's progression.

Scott Stember

analyst
#37

Understood. Then you mentioned a few of those. Items with bigger price tags, or the pricier end of the lower-priced bracket. The sales you're observing. Were the—yeah. We're out—I'm—I've got no more room in what I've been through; correct. Diagnostics was the top performer among the tools this quarter?

Nick Pinchuk

executive
#38

No. The leader was hand tools.

Scott Stember

analyst
#39

All right.

Nick Pinchuk

executive
#40

The top performer was hand tools. Yet, hand tools are just hand tools, which is the reason I devoted so much of my remarks to them—because they're fantastic. Those pliers are fantastic. The pull forged pliers. Incredible. The sheer strength of them. And Milwaukee is likely among the only places on earth capable of that, so that sort of thing really appeals to us. And I realize it doesn't count for much to folks like us—well, like me, anyway—who spend all day pushing a pencil. But it matters a great deal to the techs, and they're enjoying several of the items we're launching. Diagnostics, meanwhile, performed quite well. Make no mistake. The Triton was phenomenal. Tool storage, though, is lower, and so on. Each quarter, there's a fresh narrative around the products. Broadly speaking, I believe the major point is that overall figure. And I don't want to, well, I don't want to finish this call without stressing again what we consider the bellwether figure: 50.5% gross margin. Down merely 10 basis points in the face of 50 basis points of adverse currency transaction. Ponder that for a moment. And when you look at it, wow, that simply reveals what we accomplished, what we're accomplishing. We're doing fine; we're prevailing in the battle at the point of sale. And we're bought—since sales are somewhat, well, are relatively flat, we're still investing more since we intend to keep extending our edge in product and fresh talent. We're bringing on many people. Recruited more engineers than ours and I. Truly. Their margins are roughly 12 out of their last 13 quarters.

Scott Stember

analyst
#41

And for my final question, let's talk tariffs. Great work basically offsetting all of it this quarter; but might you size what that pressure amounted to? And with additional tariffs beginning to come through, how much larger might that become across the back half of the year?

Nick Pinchuk

executive
#42

I'm not you — you know, I promised myself I wouldn't go there. Since I believe no. That's not something I'll do. It's, you know, it's tough for me. You know, daily we're able to adjust and offset. The issue is that each day, something fresh arises. I've got someone who, every single day, drafts a document about whatever emerges from Washington, and we must go through it. The reason being tariffs keep shifting. Your estimate is no better than mine. So we must act with speed against it. Therefore predicting is not possible. And the only thing I can say is I favor where we stand compared to any of that. Where we stand is fairly strong. We build in the regions where we sell. Sure, we do carry certain exposures. We must hold out — we understand how to produce nearly anything nearly anywhere. Understood.

Scott Stember

analyst
#43

That's all I have. Thanks again.

Nick Pinchuk

executive
#44

Yep.

David MacGregor

analyst
#45

Hi there. Morning, everybody. Nice work on the advances, Nick.

Nick Pinchuk

executive
#46

Appreciate that. Hi. Morning to you.

David MacGregor

analyst
#47

Let's just focus on the C and I segment for a moment. You mentioned project postponements and how those created a certain amount of order backlog. Could you speak to when that might actually materialize? Are these efforts that, with folks perhaps feeling somewhat — I'm not sure how much more assured, but possibly a bit more assured — will come through in the back half, or is this simply an open-ended delay?

Nick Pinchuk

executive
#48

No, no. Listen. Listen. I believe this — I think that, well, it's tough to capture every detail, all the subtleties. But the truth is, I was referring to postponements. You know, folks didn't take action. And I'm also referring to the orders affecting us. They continued placing orders with us. So they didn't really cut back on ordering as much as they held off, you know, on postponements and efforts we anticipate proceeding. I still — I'm not sure about that. I think it's — I do believe we came out of this business in better shape than when we went in. And that matters a great deal; it's difficult for me to forecast the shape or, I suppose, the steepness of that trajectory. You know, it's tough for me to — but what occurs is what occurred during the pandemic. I think this is quite comparable. You know, thinking about it, people begin to examine it, and they begin to grow at ease with the circumstances. And they begin to work out how to simply handle it. It's kind of like — it's kind of like all of us running businesses. Like, you know, you know, events begin to unfold and you, you know, the swells rise and fall, and you work out how to steer through the swells eventually. At first, you feel ill from the motion, and then you adjust to it, and you work out how to manage it. And so I believe that's what will occur. I think we're calm about it; but I can't forecast. You know, anything of that sort. I do believe the business is robust, though. In any case.

David MacGregor

analyst
#49

Yeah. It even sounds that way. The figures for this quarter. Let me ask you about the tools segment. You know? Yeah. Clearly there have been many moving pieces. There's a great deal of turmoil in that area. But at one point you believed tools was a 4% grower. On a long-term basis. Is that a figure you're beginning to feel somewhat comfortable with as achievable on a sustained basis, or is that still something.

Nick Pinchuk

executive
#50

I think if you examine our figures across twenty years, you'll discover the sort of what we've accomplished, you know, and the profitability. But the profitability is rising consistently; that's truly been the secret to snap on. We've been expanding within the range we stated. Over quite a long period of time. You know, there are ups and downs. And our profitability is trending upward. And so I do believe the tools business experiences that sort of thing. This was sort of a bit unusual because you had this uncertainty go. I think there were good reasons for it, though, if you looked at the environment, particularly now, And so I'm fairly confident about the tool system. Business. I think you know, when I speak with the franchisees, they appear fairly When I speak with the customers, they appear to like our product. You know? And I do think our product is stronger than ever so I feel okay. I think you know, we have to keep executing; we have to keep working. Think we're good at it, but we have to keep getting better at it. And Yep. But I have no doubt that it's gonna go upwards.

David MacGregor

analyst
#51

David, let's revisit that earlier point on cash and how we're deploying capital. You mentioned the M and A pipeline appears promising. Yet looking back, the deals you've pursued have generally been on the smaller side — you picked up Snap-on and avoided big buyouts. Right now you're sitting on a net cash position, with solid prospects for free cash flow, perhaps around $1,000,000,000 each year. And you've just wrapped up a significant capacity expansion effort. Share buybacks haven't been especially large for you, though that could shift moving forward. So would a special dividend or a tender offer for stock be on the table, or might we see a handful of bigger acquisitions? How should that cash be deployed, Nick?

Nick Pinchuk

executive
#52

Here's my take. I remain of the view that we're operating in uncertain times. That's why I'm comfortable holding cash — I really am. I do have faith in what's ahead, but even so, I still don't — and I genuinely believe this — at some point, we will land a major acquisition. It's simply a question of when. I've been around here for quite a while, and we haven't made one yet because every opportunity we examined had some shortcoming. That said, we have no hesitation about buying something large. Our leadership team has the ability to handle it. The key caveat is this: anything transformative is off the table. What we will buy fits our disciplined growth framework, and we're convinced such targets exist as they come to market. They just haven't come to market yet.

David MacGregor

analyst
#53

Yeah.

Nick Pinchuk

executive
#54

So nothing stands out to me; that said, we do conduct reviews on a routine schedule, and you know, at a frequency greater than once per year, on a regular basis. We go over the capital, you know, the allocation process; however, at this moment, I don't anticipate us considering any of those moves. But we'll find out. It's impossible to predict.

David MacGregor

analyst
#55

Alright, I have nothing further. I appreciate it a lot.

Sara Verbsky

executive
#56

All right.

Bret Jordan

analyst
#57

Good morning. Regarding the collision segment, I believe you mentioned that it's still weak. Is this a structural issue? Or is it a cyclical one? Is there reduced demand for repairs due to ADAS?

Nick Pinchuk

executive
#58

No. Look. I'm not certain. You know? Look. I don't really know. I suppose collision could fall into the category of, you know, much of it is, you know, since you're the collision expert, you likely understand this better than me. You know? But the point is there are many of those large multi-store operators. That have been expanding And how we see things is they've gotten somewhat spooked recently; and perhaps for various reasons, they aren't investing as heavily as before; that's how we see it. So that might be accurate or not, but that's what our grassroots feedback suggests. You know? And so we somewhat think that's a factor. I believe that's within collision. That's the major factor. I think that's altering collision, making it somewhat more lukewarm. Now it had been blazing. For a long time as you likely know. There was plenty of activity, and perhaps you're referring to people not so much spooked. They're saying, alright. I will I will consolidate. I will, you know, consolidate my gains for a bit, and then begin to move forward. I don't know. We'll see what occurs.

Bret Jordan

analyst
#59

All right. Then I've got a question, I suppose, regarding how the franchise event looks. Obviously, Q3 has a somewhat tougher comparison versus a really solid franchise event a year ago. Any insight into what attendance seems to be shaping up like? It's only about a month away now.

Nick Pinchuk

executive
#60

I simply have to — I believe the — I believe the — I'm not sure. Right? Let me look; this marks our two hundred and fiftieth anniversary, so two — yes. The hundred and fifth anniversary. Two hundred — what am I saying? Hundred and fifth. And perhaps it might be somewhat larger. I'm not sure. We'll find out what happens. We're sort of preparing for it to be a bit bigger. But it's — it's — it's — a year ago it was held in Orlando, and this year, it's in Orlando for several reasons. So you can't predict how that will be received, but we anticipate a fairly strong — you know, as strong as a year ago. Checking right now. You can't know, Bret, until those final weeks, since many of the — many of the votes arrive in those final weeks; it resembles waiting for, you know, something like an annual meeting. Plenty of the votes arrive on the final day. So that sort of thing. Still, I do believe it will be fairly strong. That said, though, the SFC — you know, it's wonderful. You know, you enjoy that, but it's consistently full of enthusiasm. You can't leave the SFC without feeling great about Snap-on. But the — or those are merely orders. Right? And so whatever takes place at the SFC, you have to understand it's merely orders. And because of that, it must translate into actual and actual sales. You know, receiving high orders beats getting a stick in the, you know, in the odd wood — getting a sharp stick in the eye. Yet they aren't definitive; they aren't completely definitive. They're merely directional.

Bret Jordan

analyst
#61

Alright. Great. Thank you. Appreciate it.

Nick Pinchuk

executive
#62

Okay.

Sara Verbsky

executive
#63

We appreciate everyone being with us on this call. Soon, a recording of today's session can be accessed at snapon.com. As we always do, we're grateful for your interest in Snap-on. Have a good day.

Operator

operator
#64

That brings us to the end of this call. We appreciate everyone joining us for today's presentation. You're free to log off at this time.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Snap-on Incorporated transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.

Get the API View API docs →

This call discussed

For developers and AI pipelines

Programmatic access to Snap-on Incorporated earnings transcripts and 132,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Snap-on Incorporated or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.