Core Molding Technologies, Inc. (CMT) Earnings Call Transcript & Summary

March 8, 2022

NYSE American US Materials Chemicals earnings 23 min

Earnings Call Speaker Segments

Sandy Martin

executive
#1

Thanks, operator, and good morning to all of you; we’re glad you could join the Core Molding Technologies conference call, where we’ll go over the results for the fourth quarter and fiscal year 2021. With me today are Core Molding’s President and CEO, David Duvall, along with the company’s EVP and CFO, John Zimmer. This call is being webcast as well, and you can reach it via the audio link located on the Events and Presentations page in the Investor Relations section at coremt.com. Anything recorded during this call is accurate only as of today, March 8, 2022. So please be aware that time-sensitive information might no longer be correct as of when any replay is heard or a transcript is read. I’d also like to note that any statements in today’s discussion that aren’t historical facts — including expectations or statements about future events or future financial performance — are forward-looking statements made under the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. Forward-looking statements are, by nature, uncertain and beyond the company’s control. Actual results could differ materially from those expressed or implied. Please see the earnings press release issued today for our disclosures regarding forward-looking statements. These factors, along with other risks and uncertainties, are described in detail in the company’s filings with the Securities and Exchange Commission. Management may also discuss non-GAAP measures, including adjusted EBITDA. Reconciliations to the closest GAAP measures appear at the end of our earnings release. Core Moldings Technologies undertakes no obligation to publicly update or revise any forward-looking statements. Lastly, the earnings press release we put out earlier today is available on the Investor Relations section of our website at coremt.com. A copy of the release has also been included in an 8-K submitted to the SEC. And now I’d like to hand the call over to the company’s CEO, David Duvall. Dave?

Dave Duvall

executive
#2

Thank you, Sandy, and good morning to all of you. To begin, I'd like to express my gratitude to the more than 1,600 employees of Core Molding Technologies across Canada, Mexico, and the U.S. Their dedication and hard work are what turned 2021 into a successful year. I see and value how they've stayed committed to excellence despite the difficult conditions we've faced over the past two years. Our strategy has moved forward considerably, and we have every reason to take pride in the results we've achieved. It is my strong conviction that culture within this organization serves as a competitive edge and forms a core pillar of how we approach business strategy. Our aim is to build a workplace that is both positive and rewarding, grounded in the values we were founded on: transparency that builds trust, respect between one another, and a spirit of challenge that keeps us a learning organization. As part of our ongoing effort to connect with current shareholders and inform those who may invest in the future, this represents a meaningful milestone — it's the first earnings conference call ever held for Core. Let me begin by extending a welcome to those who already hold our stock. And to be helpful for anyone encountering CMT for the first time, we'll give a brief look at who we are as a company. After that, I'll go over what we achieved in 2021 during the fourth quarter and across the fiscal year, and then hand things to John so he can walk through the Q4 and full-year financial results in greater depth. Following that, I'll return to close out the call by covering where we stand on our longer-range strategic objectives and what we see ahead — and we don't intend to open the floor for questions on this first call; that said, we expect to include that in calls going forward. Our headquarters are in Columbus, Ohio, and our sales continue to grow across the United States, Canada, and Mexico, where we function as a top engineered materials firm delivering manufactured solutions to a broad range of markets — among them power sports, medium- and heavy-duty trucks, building products, industrial products, utilities, and automotive. One particularly important shift in how we run our business, which I'm enthusiastic about, is the technical solution sales team. They collaborate straight with our customers' engineering groups to refine the solution by switching from traditional materials over to engineered materials; this method has demonstrated its effectiveness and is made possible by Core's extensive array of processes. I'll go into more detail on that shortly. Core Molding stands as a premier engineered materials and manufacturing solutions provider, with major, varied customers across growing industries. At present we run six manufacturing sites chosen for strategic placement — 3 within the U.S., 2 in Mexico, and 1 situated in Canada. Having this wide geographic reach gives us the ability both to serve and to run operations nearer to where our end customers are. According to our market assessment, there's a substantial total addressable market worth more than $15 billion; the number of rivals we face is small. And with 42 years of operating history behind us, we're confident that our expertise, the considerable money we've put into equipment, and our extensive array of processes together form a strong economic moat protecting our business. As I noted before, an exciting avenue for growth at Core comes through our technical solution sales team and the approach they take. When we team up with customers while they're still in the development stage and get a handle on what they're dealing with right now, we're able to come up with application solutions that are optimized, drawing on our extensive lineup of engineered materials along with sophisticated modeling methods. What we're always aiming for is delivering something distinctive and finely tuned to each customer, making use of what our engineered materials can do to transform conventional materials and designs into an application solution offering better performance, reduced weight, and fewer parts at a reduced expense. Across the past several years, we've built and/or bought one of the biggest collections of processes around — 8 separate and unique processes in all — which makes a distinctive solutions approach possible for those we serve. In the industries we've chosen to focus on strategically, I consider this a clear competitive edge. Our organization keeps cultivating lasting ties with blue-chip businesses such as UFP Industries in the building products sector, along with Navistar, Paccar, and Volvo in the heavy-duty truck sector. On top of that, we established our standing for excellence with BRP and Yamaha in the power sports market across North America. These connections have been essential to what we do, and we'll keep striving for collaborative relationships over the long haul with these strategic partners, plus the numerous other customers we support. Growing revenue and broadening our reach are essential pieces of our long-range plan. During 2021, we brought in $75 million in new wins successfully, with recurring annual revenues making up more than 80% of that; these wins cover 13 separate programs, 2 of which kicked off in 2021, while the rest are set to launch across 2022 and 2023. This fresh business broadens the company's revenue streams even further by growing our operations in sectors that include industrial, utilities, and packaging, along with powersports. Reaching $75 million in new wins is a thrilling milestone, amounting to more than 26% of our product sales for the full year 2021, and it leaves us even more enthusiastic about what lies ahead for the company in 2022 and past that; we foresee diversification efforts carrying on as we expand the business, and right now we have an established pipeline exceeding $160 million. Now let's shift to our financial results. Fiscal 2021 proved to be a solid year for the company. We posted record sales of $307 million for 2021, which is a 38% rise over 2020. Beyond that, net sales came in 8% higher than 2019 pre-pandemic figures, showing that even with the market turmoil of the past 2 years, we remain capable of growing our business. Sales in the fourth quarter were robust as well, climbing 21% to $73 million versus the prior year. Our ongoing determination to counter the effects of raw material inflation meant we effectively returned the company to profitability during the fourth quarter. As you'll remember, we disclosed substantial and swift raw material inflation during the third quarter, which carried over into the fourth quarter of 2021. And much like most businesses, we presently expect inflation to persist in 2022. Even so, we've put raw material surcharge arrangements in place with every one of our long-term customers except a single one, and we're currently engaged in productive talks with that remaining customer too. Our expectation is that putting these surcharges in place, together with repricing on new programs, gets us back nearer to the margins we've seen historically. While the timing of relief from labor market pressure and supply chain bottlenecks remains unclear to us, we've adjusted and we're navigating the disruptions, in my view, about as effectively as anyone, if not better. With that, I'll turn things over to John Zimmer, our CFO, who will walk through the financial results.

John Zimmer

executive
#3

Thanks, Dave, and good morning to all of you. For the fourth quarter of 2021, net sales came to $73.2 million, which represents a 21% rise compared with the same quarter last year, while product sales grew 16% over the prior-year period. The sales growth came mostly from new programs, from utility and power sports customers, and from raw material recoveries. Fourth quarter gross profit was $8.5 million, or 11.6% of sales, down from $10 million, or 16.4% of sales, in the prior-year quarter. The margin decrease in Q4 was mainly caused by raw material inflation. If you exclude raw material inflation and the related revenue recovery, gross margin for the fourth quarter of 2021 would have been 16.6%; that said, we moved quickly in response to intense inflationary headwinds in the second half and brought the company back to profitability in Q4, which gives us confidence in how resilient our hardworking teams are. During the fourth quarter, we made progress on recovering raw material inflation, but we still could not fully offset it; for Q4, we estimate unrecovered raw material inflation at roughly $2.2 million, about $1.2 million lower than the unrecovered raw material in Q3. As Dave said, we are happy to report that we worked successfully with a number of customers from whom we had not previously recouped raw material increases to put raw material surcharges in place beginning in the first quarter of 2022; these arrangements ought to deliver additional raw material recovery levels in 2022. SG&A expenses for the quarter were $6.5 million, better than $6.9 million in the prior-year period; in Q4, the company went back to operating income of $2 billion, a sequential gain from the third quarter operating loss of $2.4 million. As a reminder, the Q3 operating loss included a charge of $2.3 million to transition profitable product work and ultimately close the Batavia, Ohio facility by December 31, 2021, which we successfully accomplished. As we explained last quarter, this facility consolidation simplifies our footprint, transitions profitable business to other locations, exits certain products that do not fit into our long-term strategy, and eliminates ongoing operating losses at this location. This plant consolidation required a significant amount of coordination and work, and we want to thank the entire Batavia plant team for their hard work. Fiscal 2021 fourth quarter net income totaled $441,000, or $0.05 per share, compared with the 2020 fourth quarter net loss of $867,000, or $0.10 loss per share. Adjusted EBITDA for 2021 was $4.7 million versus $5.9 million for the prior year. The GAAP to non-GAAP reconciliation of adjusted EBITDA financial measures can be found at the end of today's press release. Full year 2021 net sales totaled $307 million, up 38% versus the same period prior year. And product sales increased 35% versus the prior year period. For the first time ever, our yearly sales have gone past $300 million, and that comes from the robust demand we're seeing among both current and newly acquired customers. Our approach of diversifying revenue keeps delivering results, as 2021 product revenues came from a number of industries: 40% truck, 21% powersports, 16% Building Products, and 10% industrial and utilities. A little over five years back, heavy-duty truck accounted for over 80% of what we sold in products. Gross profit came to $41.3 million, or 13.4%, for the fiscal year, versus $34.5 million, or 15.5%, in 2020. As was the case in the third and fourth quarters of 2021, margins on gross profit for the whole year faced pressure, and a decline of 210 basis points stemmed largely from inflation in raw material costs and a labor market that remains tight. Keeping that in mind, we managed to speed up renewal of a key labor agreement at our Columbus facility that had been set to renew in August of 2022; under this new labor contract, our customers gain stability along with confidence in an uninterrupted supply. Selling, general and administrative expenses reached $30.3 million for the year, up $6.2 million versus the prior year, driven mainly by $2.3 million in facility closing costs plus higher payroll and travel costs relative to full year 2020 expenses, which COVID-19 cost reduction programs had affected. Excluding facility closure costs, 2021 selling, general and administrative expenses were $28 million, matching selling, general and administrative costs in 2019 before COVID. For fiscal year 2021, the company reported operating income of $11.1 million, a rise of 6.7% over operating income of $10.4 million in 2020. Without the facility closure costs, operating income for the company was $13.4 million, roughly 4.4% of sales. Return on capital employed for the company was 8.5%, in line with 2020. Net income for fiscal 2021 totaled $4.7 million, or $0.55 per share, compared with net income of $8.2 million, or $0.98 per share. Adjusted EBITDA for the full year of fiscal 2021 was $26.6 million, against $22.6 million the year before. And while inflation squeezed adjusted EBITDA margins during 2021, over the longer term we aim to reach adjusted EBITDA margins in the double-digit range. A GAAP to non-GAAP reconciliation of adjusted EBITDA financial measures is available at the conclusion of today's press release. Now shifting to the company's financial position, cash flow and balance sheet. Cash provided by operating activities for the company came to $12.5 million across the 12 months ended December 31, 2021, while capital expenditures for fiscal 2021 were $11.6 million; during 2021, we put $5.3 million into capital, mainly for a new 5,500 tonne direct long fiber thermoplastic system at our Matamoros, Mexico facility. That press is the biggest one the company owns today and it doubles the company's direct long fiber thermoplastic capacity at the Matamoros facility. We anticipate the system will be running at full capacity during Q2 of 2022. Looking at fiscal 2022, our projection for capital expenditures is somewhere between $14 million and $16 million, and we intend to keep putting money into technologies and materials so we can expand what we're capable of doing and broaden our reach across the industry. On December 31, 2021, total liquidity stood at $26 million for the company — that breaks down as $6 million in cash plus $20 million available through our revolving credit facility — and at year-end, long-term debt was $25.2 million. By the close of the quarter, our ratio of net debt to trailing 12-month EBITDA came in below 1x adjusted EBITDA; we hold the view that a solid balance sheet combined with plenty of liquidity gives us the adaptability and resilience required to navigate whatever comes next with supply chain challenges or inflationary pressure, and also lets us direct a sensible level of capital toward growth. Because we wrapped up our business transformation successfully a few years ago, our attention is on — and we have confidence in — the core strategic growth opportunities for 2022 and beyond. To put it differently, we feel optimistic about what this company can achieve and we see that our operations and procedures are being valued too low relative to the current multiple of trailing 12 months of adjusted EBITDA. Dave and I share the belief that bringing in current investors and informing new ones, combined with a deliberate strategy for targeting investors, represents the optimal route toward building long-term shareholder value. Having said that, I'd like to hand the call back to Dave.

Dave Duvall

executive
#4

Thanks, John. We are fully committed to carrying out our strategic plans for the long haul, and we've put the company in a position to keep growing. Sales in Technical Solutions are gaining traction in new industries, and we keep putting money into our people, our engineering capabilities, and our assets as we push to get better each day; we'll keep investing in our capacity to innovate and deliver technical solutions and product conversions that give our customers products that weigh less, cost less, and perform better; we'll stay focused on new industries, particularly industrial and utility, as more people work where they want to live, in suburban and rural settings alike, where infrastructure needs improvement. Above all, we'll keep investing in our team members as we work toward being a great place to work. Like many businesses, we are giving careful thought to the infrastructure bill and the associated spending that's anticipated to speed up across many areas. We think those making decisions about infrastructure investments will be assessing products and processes, and our engineering materials solutions are already helping our customers cut installation costs by switching from traditional materials to a composite solution that weighs less and lasts longer. Our engineering materials — low-cost, lightweight, and durable — along with our technical solutions team, stand ready for fast deployment into new infrastructure projects. Now to our acquisition strategy. Our aim over the past several years has been to diversify our processes and materials, and that's worked well to further enable our technical sales approach in creating unique multi-material solutions. Our broad portfolio of engineered material processes has grown and evolved to eight distinctly different processes in total, which we can combine to build an optimized solution for our customers — essentially composites of composites. A major benefit of this strategy is that it lets Core deliver solutions in industries that historically haven't taken advantage of multiple materials within a single solution. One illustration of our material diversification is our expansion into thermoplastic products, which provide sustainability benefits over thermoset materials since they can be recycled. We aim to be good environmental stewards and to strive to offer our customers products that are more environmentally friendly; in fact, we've partnered with the Ohio Soy Council and Arable Research Lab to develop bio-based thermoset resins for the thermoset industry. Seven years ago, Core offered Thermoset solutions zone. And today, roughly 50% of our business runs on thermoplastic solutions; beyond product expansion, we've also grown our geographic footprint, with more than 30% of our sales coming from Canada. Our significant growth has happened over a fairly short time frame because we made strategic acquisitions that added to our processes, materials, and footprint. This growth has been deliberate and strategic, as our $75 million in new business wins shows. We'll keep reviewing our business portfolio as well, so we can pinpoint products with low profitability and weigh either making them better or getting out of them; our belief is that sticking with our long-term strategic objectives will put the company in a position for more stability and profitable growth down the road. A bright future lies ahead for Core Molding Technologies, and we're excited to keep growing the company, keep growing our strong corporate citizenship, and deliver value for our shareholders and all stakeholders. Thank you for taking an interest in our company. Should you have questions, please reach out to us directly or arrange follow-up meetings. You can find our contact information on the release or website. Have a good day, and we look forward to giving you an update on our progress when we report first quarter results. Thank you very much.

Operator

operator
#5

That brings us to the end of this call. We appreciate your joining us for today's presentation. You're free to disconnect at this time.

This call discussed

For developers and AI pipelines

Programmatic access to Core Molding Technologies, Inc. earnings transcripts and 132,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Core Molding Technologies, Inc. or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.