Core Molding Technologies, Inc. (CMT) Earnings Call Transcript & Summary

May 7, 2026

NYSE American US Materials Chemicals earnings 35 min

Earnings Call Speaker Segments

Sandra Martin

executive
#1

Thanks, and welcome, everyone, on this fine morning. We're glad you could be with us on the Core Molding Technologies call, where we'll go over what we achieved in the first quarter of fiscal 2026. On the line with me are Eric Palomaki, our COO who is about to become President and CEO, plus our CFO, Alex Panda. Dave Duvall, who currently holds the CEO role, will stay with us as well for the Q&A portion, and please note that this session is being recorded. A webcast of this call is also available, reachable at coremt.com through an audio link located on the Investor Relations, Events and Presentations page. Keep in mind that information which is time-sensitive might not remain accurate by the time any replay or transcript is read. Anything discussed today that isn't a historical fact — such as statements or expectations regarding future events or future financial performance — counts as forward-looking statements, provided under the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. Such forward-looking statements carry uncertainty and lie outside the company's control. What actually happens could differ materially from what's expressed or implied, and our forward-looking disclosures appear in today's earnings release. Details on risk factors and other uncertainties can be found in the company's filings with the Securities and Exchange Commission. Core Molding Technologies is under no obligation to publicly update or revise any forward-looking statements. Management will cite non-GAAP measures, among them adjusted EPS, adjusted EBITDA, the debt to trailing 12 months EBITDA ratio, free cash flow and return on capital employed. You can find reconciliations to the closest GAAP measures at the end of our earnings release, which has been submitted to the SEC on Form 8-K. At this point, I'd like to hand things over to Eric Palomaki. Eric?

Eric Palomaki

executive
#2

Thanks, Sandy, and good morning to all of you. The first quarter of 2026 kept us quite occupied. Even though product revenue came in on the lighter side, our team stayed hard at work carrying out our growth strategy, bringing in $17 million of additional new wins, moving 5 of 9 presses to our new Monterrey facility, and recording our strongest gross margin quarter in more than a decade. Our must-win battle focus around the Mexico expansion remains on track, and across 50 projects already won, we keep executing a flawless launch playbook. As this is the last time Dave will be with us on an earnings call in the CEO role, I want to take a moment to recognize him and say thank you for everything he has done for Core Molding Technologies. Working with Dave has been an honor. He was central to building the culture we have and to my own development as a leader. Through his leadership, his integrity, and his steady presence, he helped chart the course for this company, and the guidance he gave me — whether we were facing difficulties, celebrating achievements, or just talking day to day — will stay with me. Dave, I appreciate your confidence in me, the backing you have given, and the standard of excellence you have demonstrated. Starting this month, I'm officially taking on the CEO position full-time. To support that transition, we've made intentional moves to strengthen our operational leadership and keep things running smoothly, filling the duties I previously handled as COO. Rather than keeping it as one job, we divided that COO role into two separate positions — a decision that reflects how much we believe in developing talent from inside the company and making sure we're ready as an organization. Our Mexico operations are now under Arnold Alanis's leadership, while Mike Gayford is responsible for the U.S. and Canada. Both of these leaders really embody what Core stands for across our 4 values: we're a learning organization, we have the courage to challenge, we show mutual respect, and we operate with transparency. On the operations side, I'd like to give another shout-out to our teams for how consistently they execute and how well they serve customers. During the quarter, our on-time delivery came in at 99.1%, and quality performance was 52 parts per million. When it comes to producing big, intricate composite assemblies, being a company that customers trust with their most important launches is central to the value we offer — and it's a big part of why Core keeps winning repeat work and expanding how much of a customer's spending we capture. What you're seeing in these results reflects how seriously we take standard work, consistency, and operational excellence. Now that Arnold and Mike are running operations, I've got more bandwidth to work alongside the people heading up our commercial and financial functions — or, as we jokingly refer to them, our two Alexs: Alex Bance, who serves as Core's Chief Commercial Officer, and Alex Panda, our Chief Financial Officer. If you need to find me, odds are I'm sitting with one of the Alexs, concentrating on making the company grow. Now let's move on to how we did in the first quarter. Our invest-for-growth programs kept up their strong forward motion, and I'm happy to say they brought in $17 million of new business wins. On top of that, it's a pleasure to share that gross margins came in above 20%. That result speaks to how well we're executing, though Alex will share additional detail on what we expect for margins across the full year shortly. Within the $17 million of new business awards was a sizable multiyear project involving a battery energy storage system. These systems are gaining wider traction nowadays—they reduce electrical loads, work alongside renewable generation, and ease the shifts or disruptions that occur on the grid. Over in transportation, we keep backing specialized electric truck platforms that serve route-based fleets, like coastal vehicles, garbage trucks, and electric buses, a lot of which are owned by municipalities. A number of the freshest battery enclosure opportunities on our plate right now relate to grid reliability uses, such as grid hardening and load shedding. Although battery uptake has cooled somewhat among consumer EV buyers, demand is climbing fast across grid infrastructure, and we're working with customers and industry partners to seize that growth. To bolster our sales pipeline, we brought on a business development manager in the first quarter and intend to make 2 more hires in the current quarter. In powersports, we keep growing our proprietary skid plate technology, which we created roughly 2 years back and rolled out in Q3 of 2025. Fresh wins this quarter feature a well-known OEM historically associated with agricultural and farm equipment, which widens how this technology gets applied even further. As we've said before, we're noticing real signals of an industry rebound, with big OEMs rolling out new product features that bring in extra core molding components spanning watercraft, skid plates, and cargo boxes. Q1 represented the third straight quarter of year-over-year revenue growth for our powersports market, posting 46% growth versus the prior year. We remain dedicated to expanding how widely Core's SMC products and Topco's abilities get adopted. Those strengths position us as a go-to source for structural molding compound, and they also let us supply complete systems that arrive ready to install. Because of this added value, we're able to take on a bigger part across the supply chain, addressing applications in construction equipment, agricultural machinery, aerial lifts, and additional industrial sectors. What makes Core stand out is our Topco paint expertise, since it yields installation-ready systems that lower overall expenses and raise production efficiency for the OEM clients we serve. All together, these investments expand what we can do technically, deepen our ties with customers, and support lasting, more valuable revenue streams that match our objectives for long-term growth and margins. Every one of Core's proprietary compounds, along with the SMC materials, remains on schedule, and production is expected to begin during the back half of 2026. During 2025, as noted earlier, we directed $6.5 million toward growing our operations in Mexico, a greenfield facility among them, and we plan to put in another $19 million over the course of this year. Work on these projects is actually moving faster than planned, and everything in Monterrey should wrap up by the end of the second quarter. In our view, the Monterrey area represents a secular growth market over the long term, positioned strategically closer to important customers. At Matamoros, our expansion calls for bringing in ultra-large compression molding presses of 4,500 tons, and that effort will continue into the second half of 2026. Each press delivers 9 million pounds of clamping force, meaning 18 million pounds will be up and running by the time the year closes; we'd love for you to come see us in September at our Investor Day, where you can get a close-up look at how these enormous composite molding systems produce parts weighing over 100 pounds for sleeper roof assemblies. Turning to what's next, we anticipate truck market volumes starting to rebound during the back half of 2026. Paired with the $63 million in new wins we locked in during 2025, set to roll out across '26 and the early part of '27, we continue to have visibility into total product revenue potentially surpassing $300 million in 2027. As the sole supplier on long-term OEM programs, we gain from enduring customer relationships that give us solid forecasting visibility, though we acknowledge that macro conditions may shift timing. With that said, I'll hand the call over to Alex now so he can walk through the financials in greater detail.

Alex Panda

executive
#3

Thanks, Eric, and good morning to all of you. First quarter revenues came in lower by 4.7% versus the same period a year ago, which was what we anticipated, and the main factor was the truck cycle dynamics we've talked about before. During Q1, sales of medium- and heavy-duty trucks accounted for 34% of Core's total product sales, compared with 44% in fiscal 2025. As Eric mentioned, our gross margins were strong at 20.4%, up 120 basis points from a year ago and up 520 basis points from the previous quarter. A favorable revenue mix drove this result, including a move away from tooling and toward product revenue with higher margins. Although we're happy with our margins in the first quarter, we're still comfortable restating our full year gross margin target range of 17% to 19%, especially considering the higher tooling revenue we expect in the fourth quarter. Our powersports end markets kept growing in the quarter, with revenue up 45.7% year-over-year; this faster pace probably pulled some volume ahead from the second quarter as OEMs get ready for spring demand. SG&A expense for the first quarter came to $11.2 million, or 19.1% of sales, versus 14.6% in the same period last year. This quarter's SG&A included $2.1 million of costs tied to Mexico expansion and $924,000 of succession-related costs. If you exclude those items, normalized SG&A would be about $8.2 million, or 14% of sales. Operating income for the quarter was $764,000, compared with $2.8 million in the prior year period, which reflects the SG&A items we just discussed. Net income was $605,000, or $0.07 per diluted share. Adjusted EBITDA reached $7.3 million, or 12.5% of sales, compared with $7.2 million, or 11.7%, in the prior year period. Operating cash flow for the quarter was a use of $9.2 million, due to planned investments in our Mexico growth initiatives, including tooling payments, press relocations and inventory bank builds. Capital expenditures came to $3.8 million, leading to expected negative free cash flow of $13 million, in line with our budget and investment plan. For the full year, we still expect capital expenditures of roughly $25 million to $30 million, with $18 million to $20 million going to Mexico organic growth initiatives. These planned investments show our confidence in the returns we'll earn from our organic growth initiatives and the strong execution our operating teams have delivered. As of March 31, our balance sheet is still strong, with total liquidity of $73.5 million, including $23.5 million in cash and $50 million of availability under our revolver and capital credit lines. Term debt was $19.3 million, and our debt-to-EBITDA ratio is still below 1x on a trailing 12-month basis. Return on capital employed was 6.8%, or 7.9% excluding cash, based on trailing 12-month pretax operating income. As new programs launch and asset utilization improves, we expect ROCE to strengthen. Additional details, including GAAP to non-GAAP reconciliations, are in our earnings release. Our capital deployment strategies prioritize organic growth along with continued disciplined debt and working capital management. Over the course of the quarter, 24,545 shares were bought back by us, at an average of $18.62 apiece, amounting to $457,000 in total; we raised our repurchase authorization by $6.5 million during March, and our intention is to keep opportunistically counterbalancing dilution stemming from equity compensation. As for fiscal 2026, our expectations remain as follows: first, overall sales should be somewhere between flat and roughly 5% higher, with tooling revenue skewed toward Q4. Second, we anticipate that most of the $63 million in new program wins landed in 2025 will add to results in the back half of 2026 and reach full annualized volumes in 2027. Third, we stay cautiously optimistic as order builds tied to a truck cycle recovery begin to appear in this year's second half; fourth, gross margins for the full year should land in a 17% to 19% range. Fifth, Mexico expansion-related expense of $2.1 million was incurred by the company in Q1, with roughly $900,000 anticipated in Q2. Sixth, succession planning related costs of $924,000 were incurred by the company during Q1, and approximately $900,000 more is expected across the remainder of 2026, mostly in Q2. Turning now to tariffs and the recent moves in oil prices. Preferential tariff treatment under the USMCA, which has a joint governmental review set to begin in July 2026, is something our customers currently enjoy. Demand patterns could shift due to any changes, and we keep watching for possible effects on our customers and end markets. Regarding the recent climb in oil prices, contractual mechanisms are in place on our end that let us pass through the bulk of those costs; and with that, I'd like to hand things back to Eric.

Eric Palomaki

executive
#4

Alex, thanks. We're pleased with the results of this year's must-win battle, particularly how we've executed the Mexico expansion — it remains on schedule and is tracking to the projections in our budget. From where we sit, these organic investments further distinguish Core as a leader in highly specialized large and ultra-large molded solutions. Even as we grow, we remain grounded in the fundamentals, operating the business with the highest standards and discipline when it comes to safety, people, quality, delivery and cost, while staying closely attuned to our customer's voice. Our business development pipeline continues to exceed $220 million in high-quality opportunities. We landed $17 million of new awards in Q1, which gives us confidence we can hit our goal of $50 million in new program awards for 2026. A key point is that these wins continue to draw in customers across new and emerging markets for Core, and they line up nicely with what we're prioritizing when it comes to strategic diversification. Among the target segments are specialized transportation applications for electric vehicles, inner box panels for electric pickup truck platforms, satellite tracking systems, building products, construction and agriculture, along with rising demand for SMC compounds and our growing Topco paint capabilities. We remain sharply focused on scaling execution excellence, taking advantage of our fixed cost base, optimizing our manufacturing footprint, and building stronger operational discipline throughout the enterprise. The whole company is behind our commercial team, and they're bringing real energy to the work. Because of that, we continue to move closer to our long-term target of $500 million in yearly revenue, while keeping a sharp eye on profits, cash generation, and returns on capital employed. Demand in our powersports market was strong, though part of that revenue got pulled into the first quarter, and we see the recovery as having real momentum. Along with ongoing gains in wallet share and organic sales growth, commercial momentum is building; we are deliberately going after big, expanding, diverse end markets such as construction, energy, industrial, aerospace, and medical. We're also getting customers involved earlier and earlier in the design cycle. The kind of customers we're talking about want a strategic partner — someone like Core — who can handle design, fabrication, and installation-ready finished systems all under a single roof, and who brings a demonstrated history of dependable, flawless launches. To our hardworking team, I want to say thank you. Everything we achieve is made possible by the dedication, expertise, and effort you bring. In the same way, we appreciate the ongoing trust and backing of our customers, shareholders, and Board as we carry out our strategy. During last quarter's call, we noted that an Investor Day would take place in Brownsville, Texas, on September 29 and 30. Beyond getting ready for that Investor Day, the occasion will give us a chance to mark something significant for the company — Core's 30-year anniversary. Day one's afternoon will feature a series of presentations, and on the morning of day two we'll run a tour of the Matamoros facility that takes in the shop floor and shows our manufacturing execution engine in action. During that visit, attendees will get a look at Core's ultra-large composite manufacturing capabilities, among them the 2 new 4,500-ton presses I mentioned earlier, which in our view rank among the strongest anywhere in North America. A save the date will be sent out within the next 2 weeks. If you'd like to take part and the invitation never shows up, just reach out. Additionally, we are scheduled to participate in the East Coast IDEAS Conference, taking place in New York City on June 10, where a presentation will be delivered as well as one-on-one meetings held. Anyone interested in scheduling time with management should get in touch with us. Having said that, we'll now begin taking questions from the line. Operator?

Chip Moore

analyst
#5

I'd like to dig into powersports, which has been really robust. Perhaps you could expand on that — my sense is a bit of demand got pulled ahead. Could you help us quantify that, along with the seasonal factors at play? Do you have any views on that segment, particularly around fuel prices overall? And considering that pull forward, help us think through what Q2 looks like, since trucking is more of a second-half narrative when it comes to pickup.

Eric Palomaki

executive
#6

Sure. Broadly speaking on powersports, Chip, I'd say a recovery in powersports is clearly underway. The downturn tied to COVID has reversed. What dealers would describe as moderate, normal inventory levels have returned. Many of our customers are quite pleased with where things stand; on the watercraft side of powersports, we had a solid first quarter. The numbers reflect that. We wouldn't really anticipate sustaining that across the coming quarters. However, the skin plate introduced in the prior year has reached full run rate now. That will carry on through the remainder of the year. So overall, expect powersports to be up, with Q1 perhaps rising somewhat more than we'd anticipate for the balance of the year. That said, don't read it as a huge drop in Q2 or anything like that — it's simply that the first quarter was very strong.

Chip Moore

analyst
#7

Understood. That's useful. And perhaps regarding new business, you described certain investments and goals — what has you enthusiastic, and perhaps the battery chance overall. Seems like you landed a good win there. How big do you figure that market could become for you?

Eric Palomaki

executive
#8

Yeah. Let me begin with the awards specifically for Q1. One was that battery energy system client, which is $9 million annually, and they agreed to 3 years minimum of that volume with us as well. So quite good. At times we get really thrilled about the large OEM business carrying 5- to 10-year terms, yet securing a customer such as this one pledging 3 years of volume on top of that is a great asset in these diversified markets; we're engaged with a few other customers within that same battery energy system category, but the initial one is fairly substantial out of that $17 million, with $9 million coming from that customer. We captured another product that uses the SkidPlate technology we created 2 years ago; that's valued at a couple million in powersports; and we also landed another aero truck roof deflector valued at another $5 million. What's great about that one is it involves a truck OEM where we don't conduct much standard business. So, we're growing somewhat with additional customers in truck and transportation. But truly large panels on a roof or an air deflector suit us perfectly. So that's yet another excellent project valued at slightly under $5 million annually once it launches in 2028.

Chip Moore

analyst
#9

That's really helpful detail. Now, regarding that battery contract worth $9 million annually — does it fall under transport, or does it belong to the grid segment you just mentioned?

Eric Palomaki

executive
#10

It's on the grid side. Specifically, stationary batteries, in which you assemble a sizable bank — a large installation of batteries — in order to shed load or to handle various kinds of energy scenarios.

Chip Moore

analyst
#11

Yeah. Fascinating. Yeah, that's a fantastic opportunity in the market.

Eric Palomaki

executive
#12

The tech is comparable to, say, a battery, though you don't face those same demands around crash test ratings and similar things. That makes SMC an ideal composite answer for constructing a really big battery pack, and these are essentially just placed into racks — not inside the data center, but in some cases they back up data centers rather than serving as generation, similar to how plenty of natural gas generators get installed at data centers all over the place. This serves as a substitute for that. Should you believe you required coverage for 1 hour of power shortage, or 3 hours of power shortage, batteries could handle it in place of natural gas generators.

Chip Moore

analyst
#13

Yes, great. Regarding what you mentioned, SMC — is it basically at capacity? Or how do you view future capacity?

Eric Palomaki

executive
#14

Our attention is on bringing out the 4 programs we discussed at the close of last year that we secured. We still have 3 of them left to introduce within the coming 90 to 120 days. That's genuinely where the team is putting its effort. Yet we keep bringing in new customers for SMC compounds. So we aren't at capacity yet, though we remain quite optimistic about our SMC compound offering.

Chip Moore

analyst
#15

Great. Alright, regarding Mexico, it seems you're ahead of where you planned to be. Is there anything worth flagging to keep an eye on, or does it look like everything's on track to wrap up shortly?

Eric Palomaki

executive
#16

Yeah, everything's on track. Two weeks back, our entire executive leadership group along with me devoted seven days down there, and we couldn't be more proud of the crew and everything they've accomplished. Getting a building up and running, packed with machinery, in only a handful of months is truly impressive. So they remain on plan, and by the close of Q2, the Monterrey site ought to be essentially fully relocated and brought together beneath a single roof, then during Q3 we'll begin getting it all consolidated and realize the advantages tied to that relocation in Q4. As for the Matamoros crew, they've freed up the area needed for the Volvo launch coming in 2027, and all of that machinery is currently being manufactured and will be put in place across Q3 and Q4. So there's still plenty of work remaining at our Matamoros site, along with a significant portion of that capital spending; and the payoff from it should begin showing up in the latter half of '27 — or the first half of '27 when it goes live.

Dave Duvall

executive
#17

So, we'll be excited for late September once more at that point. I believe we're positioned really well.

Bill Dezellem

analyst
#18

I have a few things I'd like to ask. To start, when it comes to the strength in powersports, is the main driver the new program wins? Or is the bigger factor a bounce back in buying since inventory levels are now more sensible?

Eric Palomaki

executive
#19

Both play a role, Bill, and let me be sure to give you some detail on that. There's no question that watercraft get a push on an annual cycle. So, they're looking to get those units to dealers in the spring, since the bulk of North America essentially has a summer boating season; and so, you get — we saw a fairly solid push on the watercraft side. Beyond that, though, the broader rebound in powersports has made it clear that we're seeing it across the whole mix; so, whether it's an off-road vehicle or a watercraft, that baseline is rising. And then I'd offer you one more thing as a third piece, a third leg of it. You'll recall the skid plate technology launch in Q3 of '25. We're still in a year-over-year situation. So, up until we reach Q3, on a year-over-year basis, we'll be adding that skid plate technology incrementally; and now we've also landed another win with a different OEM that will apply that same technology on another side-by-side that we'll bring to market in '27. We're very excited to keep leveraging that — our capability to produce that large and ultra-large part in one single shop.

Bill Dezellem

analyst
#20

So, based on what you're telling us, it sounds like the powersports sector has settled down following the COVID surge and subsequent decline, and we've now returned to what we'd simply describe as a typical cycle for powersports. Would that be an accurate way to characterize what you said?

Eric Palomaki

executive
#21

That's right, and I'm speaking specifically about Core's take on powersports. Speaking as a consumer myself, I'd say certain areas within powersports likely remain soft. However, our off-road category leans heavily toward utility vehicles, and those continue to sell quite strongly. Vehicles used by contractors, municipalities, and school districts — people who put them to work rather than using them purely for fun — those remain excellent sellers, and we carry a great deal of content on them. So within the powersports space, we've got a solid mix.

Bill Dezellem

analyst
#22

Also, I don't want Alex to be excluded here, so I'll pose a few questions about the balance sheet, if that's alright. Accounts receivable rose considerably compared with the fourth quarter, and what's curious is that contract liabilities also climbed quite a bit. So I'm curious whether some kind of deferred revenue effect might be at play. Alex, could you walk us through those 2 items, please?

Alex Panda

executive
#23

Sure. That's a good question. It ties directly to how we billed a progress payment to Volvo. That's the big tolling job scheduled to wrap up in Q4 of 2026. A progress billing was issued right at the close of Q1, so ideally it gets paid in Q2. And the offset for that sits down in contract liabilities.

Bill Dezellem

analyst
#24

Alright. Essentially, those two are the same thing, then.

Alex Panda

executive
#25

That's right. That's right.

Analyst

analyst
#26

To start, I want to congratulate David. If you have held this stock for quite a while, during the previous 2 truck cycles, it fell into the low-single digits, and it looks like we have navigated this particular one rather well under your leadership. So, well done on that.

Dave Duvall

executive
#27

Thanks, Lawrence. Our team is strong.

Analyst

analyst
#28

Absolutely. You've performed admirably throughout this portion of the cycle. I have a question regarding the Mexico expansion. I simply observed in the financials that you included as an addition to the financial statement that you — it appears you expensed the expansion down there for, I'm not sure, $3 million. Would that typically be capitalized? And why would that constitute an adjustment to earnings?

Eric Palomaki

executive
#29

Yes. So, there is a — as part of the expansion, we are relocating our presses in 2 locations. So, within our existing Monterrey facility, we are transferring 6 structural foam machines to the new facility in Monterrey; and then our DCPD business that's located in Matamoros that is also relocating to the new Monterrey facility. And so, as part of just accounting rules, we have to expense those expenses mainly because it doesn't add any new value to the piece of equipment; we do review all of those expenses. And if we are performing improvements or upgrades to those machines as part of the move, we will capitalize those. But the straight rigging costs, uninstallation and reinstallation because there's no true value add, we cannot capitalize those expenses. And so, they're onetime expenses that we add back for — that won't be reoccurring.

Analyst

analyst
#30

All right. So for my second question — or rather my final one — I'd like to direct this to Eric. There are times when a company brings in a fresh CEO who is eager to create a lot of buzz, going out and pursuing some huge, ill-advised acquisition, and those deals frequently end up not working out well at all. What I'm curious about is where your thinking sits and what your plan looks like. We've discussed acquisitions before with David, and he has genuinely avoided — remained clear of — that whole arena. So I'd like to hear how Eric views this moving forward.

Eric Palomaki

executive
#31

Absolutely, Lawrence. I appreciate you asking. One thing that's worth keeping in mind, and I think it's a fairly interesting point, is that Dave and I both came on board at approximately the same moment, 7.5 years back. Naturally, I've been involved with this business throughout that entire stretch, serving on the executive team under Dave, and I've played a role in shaping the strategy. So I'm not arriving as some outsider stepping in as the new CEO, which is obviously something you've witnessed happening at a great many Fortune 500 companies just recently. So there's no big splash, and there's no significant shift when it comes to the strategy, when it comes to how we execute, and truly when it comes to our customers and our people. I feel a great deal of pride in our team, in the Board, in Dave, and in the succession planning we've carried out — nobody has been caught off guard, whether we're talking about internal stakeholders, external stakeholders, or our customers. We've managed to remain quite consistent. So what I'd tell you is there are no major changes — merely a transition and an ongoing commitment to the strategy, along with continuing to expand the business and capitalize on the execution engine we've fought so hard to safeguard. Having the ability to navigate a truck cycle the way we have, as you pointed out, represents an enormous transformation for the business across these years, and it has positioned us so that we're able to make different choices and different investments. You might already be aware of this, Lawrence, but Dave will serve as an adviser to us over the coming 18 months as well. That means he'll remain available to advise me, field questions, and provide support in an advisory capacity throughout all of '27.

Analyst

analyst
#32

Right. I believe that, one — like we have discussed previously, at times simply repurchasing your own shares while they are priced at an exceptionally cheap valuation is the finest use of that very solid balance sheet you have built up.

Dave Duvall

executive
#33

We have taken to heart the lesson that came from starting out without a robust balance sheet.

Analyst

analyst
#34

Yeah. Assuming you recall the prior cycle, I certainly hope that's the case.

Dave Duvall

executive
#35

That alters how you arrive at a choice.

Eric Palomaki

executive
#36

We appreciate you taking the time to follow what's happening with our business. A few months from now, when we share our second quarter results, we're eager to give you a fresh look at how far we've come. Wishing you a wonderful day.

Operator

operator
#37

I appreciate it. That brings us to the end of the call for today. We're grateful that you joined us for this presentation. At this point, feel free to hang up.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Core Molding Technologies, Inc. transcript — plus 131,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.

Get the API View API docs →

This call discussed

For developers and AI pipelines

Programmatic access to Core Molding Technologies, Inc. earnings transcripts and 131,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Core Molding Technologies, Inc. or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.