Core Molding Technologies, Inc. (CMT) Earnings Call Transcript & Summary

March 10, 2026

NYSE American US Materials Chemicals earnings 39 min

Earnings Call Speaker Segments

Sandra Martin

executive
#1

Thanks so much, and welcome, everybody. We’re glad you could be with us on this Core Molding Technologies call as we go over what we achieved in 2025. On the line with me today are Dave Duvall, our President and CEO; Eric Palomaki, our COO and the CEO who will be taking over; and Alex Panda, our CFO. You can hear this call via webcast, and it’s reachable at coremt.com through an audio link located on the Investor Relations, Events and Presentations page. A recording will be made of today’s call, Q&A portion included. Keep in mind that information which is time-sensitive might not remain accurate by the time anyone replays it or reads a transcript. I’d also like to note that anything discussed today that isn’t a historical fact — such as statements or expectations about future events or future financial performance — counts as forward-looking statements, provided under the safe harbor protections of the Private Securities Litigation Reform Act of 1995. Such forward-looking statements carry uncertainty and lie beyond the company’s control. Results that actually occur could differ materially from what was expressed or implied. For our disclosures regarding forward-looking statements, please look at today’s earnings release; those factors, along with other risks and uncertainties, get described in detail in the company’s filings with the Securities and Exchange Commission. Core Molding Technologies has no obligation to publicly update or revise any forward-looking statements. Management will discuss non-GAAP measures, among them adjusted EPS, adjusted EBITDA and debt to trailing 12 months EBITDA ratio, free cash flow and return on capital employed. You can find reconciliations to the closest GAAP measures at the end of our earnings release. We’ve submitted our earnings release to the SEC on Form 8-K; at this point I’d like to hand the call over to the company’s President and CEO, Dave Duvall. Dave?

Dave Duvall

executive
#2

Thanks, Sandy. Morning, everyone, and thanks for being with us today; we appreciate that you continue to take an interest in Core Molding Technologies. Back in 2019, we began a fundamental overhaul of the organization, aiming to build a company around 3 core values. First, a winning culture — one that prizes what the team achieves above what any individual achieves. Now, a quick anecdote. It's amusing how, after enough time passes, things can become entirely clear. Many years ago, after I'd spent the whole night getting a plant up and running, a leader told me that winners win. Back then my reaction was, whatever, since all I wanted was some sleep. Yet I came to understand that it truly is a truth. Build a team that regards itself as winners, and they'll take enough pleasure in winning to surmount every challenge the team confronts. Second, disciplined execution, which matters even more than a strong strategy. Third, the team prizes and anticipates a daily inner drive from each employee to keep improving, learning, and growing. To me, this is the essential basic foundation for any organization that achieves at a high level, and we have deliberately pushed these values through every system in our business. We're more thrilled than ever by the progress achieved and the sturdy foundation constructed to fuel sustained growth. Via this transformation, we've put in place sturdier operating systems, widened margins, reinforced the balance sheet, assembled a deep and capable leadership team, and built a culture driven by performance. With that foundation solidly established, as our financial performance demonstrates, we now concentrate on capitalizing on everything we've built in order to fuel growth. Across the last 2 years, we've likewise finished a thorough executive leadership transition via a deliberate and structured process. This strategic focus on continuity and readiness, backed by extensive training, coaching, and development, will guarantee strong alignment, sustained financial and operating performance, and in the end fuel long-term success for the company and our shareholders. As shared earlier, I intend to formally retire from Core at the end of May, with Eric taking over as CEO after me. I'm tremendously thankful for the chance to keep supporting the organization in an executive advisory role through the end of 2027. In that role, I'll keep working closely with Eric, our board, and the wider leadership team to guarantee continuity and a smooth, successful transition as they steer the company onward. Looking forward, I have confidence in Core's long-term direction. The momentum we created, the recent wins throughout the business, and the strength of our leadership team bolster the path we're on as the company keeps driving growth and long-term value creation. With that, I'd like to hand the call to Eric and Alex to talk about our fourth quarter and full-year performance. Eric?

Eric Palomaki

executive
#3

Thanks, Dave, and good morning to everyone. I'd like to open with some big-picture observations about how we did in 2025 and where we stand strategically. Through our Invest For Growth initiative, we brought in $63 million in business wins, and in doing so we pulled off the must-win battle we had targeted for 2025. What matters is that most of those newly won programs bolster our strategic diversification strategy — they move us past truck and powersports end markets and make our portfolio more resilient overall. Now, on powersports: we're noticing the first indications of an industry recovery, something the market now widely expects. Several major OEMs rolled out products that carry more Core Molding Technologies content, including watercraft, skid plates, and cargo boxes. Those new product solutions went onto vehicles during the second half, which produced 2 consecutive quarters of revenue growth in powersports for 2025. Our sheet molding compound, or SMC, business is another place where we made meaningful headway. In early 2025, we set up SMC compound as a new sales channel to serve the growing building products market — an addressable opportunity worth more than $200 million. During the fourth quarter, our sales and marketing team brought in $12 million in annual SMC revenue, and $21 million across the full year. Of those compounds, 1/3 have already been launched, and every one of them is slated to be in production by the close of the third quarter of 2026. We stay focused on getting customers to adopt Core's SMC offerings more widely, positioning ourselves as a preferred supplier of molding compound. Our Voice of the Customer, or VoC, initiative proved instrumental in landing new SMC programs during 2025 and in expanding our top coat capabilities at the Monterrey facility. That value-added capability lets us provide finished, installation-ready products for construction and agricultural equipment, plus aerial lifts and other industrial applications. As we've discussed before, we put $6.5 million into the Mexico expansions and Greenfield plant in 2025, and we plan to invest another $19 million in Mexico this year. Construction is moving along well, with press pits finished in Matamoros and considerable headway on building 2 state-of-the-art 4,500-ton SMC molding presses. When this capacity is fully ramped, we expect it to support up to roughly $20 million in annual revenue from SMC molded and assembled sleeper roof products; beyond Core's capital investment, we're also overseeing our customers' tooling project, which should generate approximately $35 million in tooling revenue. We expect to wrap up that project in Q4 2026. As planned, we've also started moving DCPD presses and low-pressure injection molding operations to Monterrey, which puts those capabilities nearer to key growth customers. Our view of the Monterrey region remains that it's a long-term secular growth market with considerable strategic potential. Our top coat paint capability adds even more to these offerings and sets us apart competitively, since it lets us deliver installation-ready components, lowers total system cost for OEM customers, and boosts manufacturing efficiency. Taken together, these investments substantially broaden our technical capabilities, deepen customer alignment, and generate durable, high-value revenue streams that underpin our long-term growth and margin objectives. Turning now to what we expect in truck and powersports, it looks like volumes will begin recovering during the back half of 2026. Pair that with the $63 million in new wins booked in 2025 that are set to roll out over the course of '26 and into early '27, and the visibility we have suggests total product revenue has the potential to top $300 million in 2027. Programs with large OEMs run long — anywhere from 5 to 10 years — so compared with most companies, we're in a better position to project growth well out into the future. Now on to Q4 results. Revenue came in at $74.7 million, up 27.8% sequentially and up 19.5% on the top line versus the prior-year period. More tooling revenue tied to business won recently, along with solid product revenue in powersports, building products, and other, was enough to more than make up for softer truck volumes in the quarter. At 10.2%, adjusted EBITDA margin was up 100 basis points compared with a year earlier. Operating cash flow came to over $19 million for 2025, after producing $35 million in fiscal 2024. Across the full year, gross margins held steady inside our 17% to 19% target band, and we produced positive free cash flow year-to-date; we also wrapped up the footprint optimization effort we kicked off at the close of the second quarter. Because we keep concentrating on profitability at the product level, we brought our resin transfer molding, or RTM, operations together by moving selected programs to other sites; doing so makes operations at the originating location more efficient and pushes margins higher still. Last, I want to give credit to our operational teams, who once again executed at a very high level this year. We hit 99% on-time delivery along with 62 parts per million on quality, which leads the industry and forms a key piece of the value we offer; those outcomes speak to how strong our team is, the discipline we operate with, and the dependable business systems we have. Under our strategy, we strongly hold the view that culture gives us an edge in the marketplace at Core Molding, and it shows up in the way we perform daily; having said that, I'll hand the call to Alex so he can walk through the financials in greater depth.

Alex Panda

executive
#4

Thanks, Eric, and good morning to all of you. For fiscal 2025, revenue came in down 9.5%, which is what we had anticipated, and the main driver was ongoing softness in the truck segment — that segment accounted for 44% of Core's product sales during the year. Like Eric mentioned, even with reduced volumes and strain on operating leverage, our gross margins landed at 17.4%, which shows the margins held up well. If we make adjustments for hourly-related severance along with the effect of tooling margins, we calculate 2025 gross margins to be about 100 basis points greater. Through keeping margins inside our 17% to 19% target band and exercising strict control over SG&A costs, we produced $19 million in cash flow from operations during the year. We took encouragement from fourth quarter net sales of $74.7 million, which were fueled by tooling revenue exceeding $19 million. Although greater tooling revenue was partly counterbalanced by reduced product sales on the whole, strength in powersports, building products, and industrial and utilities softened that impact, helping counter ongoing truck weakness. Our fourth quarter gross margin came to $11.3 million, equivalent to 15.2% of sales, which lines up with what is typically our softest sales quarter each year. Hourly severance costs together with tooling margins created an unfavorable effect of roughly 230 basis points on fourth quarter gross margins. Throughout the last year, we carried out a number of initiatives centered on operational efficiency, raw material cost, footprint optimization, and improving margins overall, all of which assisted in countering margin headwinds. Fourth quarter SG&A expense totaled $7.7 million, or 10.4% of sales, versus 14.4% during the same period a year earlier. When we exclude severance and executive transition costs — $476,000 in the fourth quarter of 2025 and $1.066 million in the comparable prior year period — fourth quarter 2025 SG&A expenses were $7.3 million, or 9.7% of sales, versus 12.7% in the prior year period. Operating income for the quarter reached $3.6 million, or 4.8% of sales, an increase from $0.9 million, or 1.4% of sales, in the prior year period. Fourth quarter net income was $3.1 million, or $0.36 per diluted share, against a loss of $39,000 in the prior year. Adjusted EBITDA for the quarter totaled $7.6 million, or 10.2% of sales. Across the full year, GAAP cash generated from operations was $19.2 million. Following capital expenditures of $17.3 million, free cash flow came to $1.9 million. Turning to what's ahead, we anticipate sustaining capital expenditures of roughly $7 million to $10 million in 2026. When we factor in planned investments of approximately $18 million to $20 million for Mexico facility expansion, we project total 2026 capital spending to fall within the range of $25 million to $30 million. We will additionally incur operating expenses of roughly $2.5 million tied to these expansion projects during the first half of 2026, and we'll keep providing quarterly updates on that. As of December 31, our balance sheet remains solid, with total liquidity of $88.1 million, made up of $38.1 million in cash and $50 million of availability under our revolver and capital credit lines. Term debt came in at $19.7 million, and on a trailing 12-month basis our debt to EBITDA ratio is still under 1x. Return on capital employed stood at 8%, or 10.2% when you exclude cash, and that's figured using trailing 12-month operating income on a pre-tax basis. As new programs keep rolling out, we anticipate ROCE getting better thanks to stronger top-line leverage and improved asset utilization. You can find additional details, among them GAAP to non-GAAP reconciliations, in our earnings release. Our approach to capital allocation stays balanced and flexible, prioritizing organic growth, ongoing disciplined management of debt and working capital, and opportunistic share repurchases. In 2025, the company bought back 201,999 shares at an average price of $15.70 per share, leaving $1.4 million available under our authorization. Now, for fiscal 2026, here's what we currently expect. First, total sales flat to up approximately 5%, with tooling revenue once again more heavily weighted toward the fourth quarter. Second, because of our 12- to 18-month quote-to-cash cycle, most of the $63 million in new wins will hit results in the second half of 2026 and 2027. Third, we remain conservative on the truck recovery and align with ACT forecasts pointing to truck cycle recovery beginning in the second half of 2026. Fourth, gross margin between 17% and 19% for the full year of 2026; and last, one-time SG&A costs for the year are projected at roughly $2.5 million tied to Mexico relocation and non-capital construction activities, plus $1 million tied to succession planning. The bulk of these costs will be incurred in the first half of the year. Finally, tariffs are on everyone's mind, but our products made in Canada and Mexico stay under USMCA compliance and are exempt at present. We'll keep watching trade developments closely and any potential impact on our customers and end markets. With that, I'd like to hand it back to Eric.

Eric Palomaki

executive
#5

Thanks, Alex. We're putting together an organization for engineering and manufacturing solutions that ranks among the best anywhere, with a reputation people trust in molded solutions that are highly specialized, large, and ultra-large. Opportunities keep coming at us in a robust and growing pipeline, and the range of engagements we're seeing—spanning new customers, existing ones, and end markets alike—gives us real encouragement. As of today, that business development pipeline equals $220 million in quality opportunities, and we're making solid headway toward locking in another $50 million of new program awards over the course of 2026. In May, we look forward to walking everyone through our Q1 wins and talking about them. The 2025 wins have us especially enthusiastic, since 65% of them sit in new and emerging markets for Core and line up with the diversification strategy we've deliberately chosen. Among these strategically targeted markets are inner-box panels for an electric pickup, satellite tracking systems, building products, and specialized transportation applications. On the operational side, our attention stays sharply on scaling up our platform of execution excellence, making the most of our fixed cost base, and optimizing our manufacturing footprint overall. The progress we've achieved energizes us, and so does the $102 million in annualized run rate incremental business wins we've booked over the past 2 years; our sales team, along with the whole organization supporting them, has done an outstanding job executing. As we carry out all of these new launches, we'll keep taking deliberate actions to strengthen our operating capabilities and profitability. Looking further out, we have confidence in our ability to reach $500 million in annual revenue as part of our long-term objective of <<inaudible>>. An intense focus on profitability, cash flow, and return on capital employed will remain in place. Disciplined capital allocation, continuous improvement, operational excellence, and growth form the roots of our strategy; we're confident this is only the beginning of the continued momentum we are seeing here at Core. We're targeting large, diverse end markets, including construction, energy, industrial, aerospace, and medical, and we're engaging customers earlier and earlier in the design cycle. What customers want are strategic partners like Core, capable of delivering design, fabrication, and finished installation-ready components all under one roof. To close, I'd like to thank our team for their dedication and execution, which have been critical to the progress we've made throughout the transformation. Our customers, shareholders, and board deserve our thanks as well for their continued confidence in Core Molding and in what we are building together. Last thing: we're in the planning stages of an investor day scheduled for this fall; September 29 is our target for management meetings and September 30 for a facility tour, which will include a half-day visit to our Matamoros facility with secure private group transportation from Brownsville, Texas. Our capital investments—the ones that make Core's ultra-large composite manufacturing capabilities the best in North America—will be best showcased by this facility. Safety, logistics, and investor preferences are all on our minds, and details for the visit are still being finalized. Please feel free to reach out with any questions or considerations as we continue to refine our plans. Before that happens, we're going to be at the ROTH Conference out in California, where we'll hold one-on-one meetings on March 23 and 24. If you'd like to set up a meeting or an investor call soon, please get in touch with us; with that said, let's open up the line for questions. Operator?

Chip Moore

analyst
#6

For my part, regarding that guidance of flat to up 5%, I believe you mentioned anticipating a fair amount of tooling revenue stemming from the expansion — or tied to it. Could you help us frame how that breaks down, or what tooling revenue potential sits within that outlook for '26?

Dave Duvall

executive
#7

Sure; the breakdown should look much like 2025. A comparable year-over-year division, and once more, that's largely because of the Volvo program we told you about in Q2. So we expect to wrap up that tooling revenue during Q4 of 2026; so quite comparable to 2025.

Chip Moore

analyst
#8

Got it; and with Q4 being higher.

Dave Duvall

executive
#9

Correct.

Chip Moore

analyst
#10

All right. All right. And beyond that — when you're looking ahead to '27, your visibility is improving, plus the markets are giving off a few positive signals. Is there a way to frame what margins could do? Clearly, 17% to 19% has been your steady range, but could you push past it once volumes return and with certain initiatives in motion?

Dave Duvall

executive
#11

Yes. I believe our guidance was 0% to 5%. As it stands, based on what we're projecting and what we can see, we'd land nearer 5% in '26; the primary reason is the program wins we secured; those launch in the second half of 2026, so 2027 will bring a full run rate. And on margin, I'd say you're exactly right. We'll begin regaining leverage in 2027. My sense is that adds up to somewhere in the range of 150 to 200 basis points. We view low 20s as achievable.

Eric Palomaki

executive
#12

Thank you, that's really useful. Now, looking at calendar year '26, we're familiar with the truck market, and we can see it recovering, at least based on what ACT is saying. Their projection is a gain of roughly 5%, mostly in the back half. On powersports, we're already seeing a rebound, and it's stronger than what we expected when the year began. I believe the genuine upside that all of us recognize is this: given every launch from last year plus the launches carrying into this year, the key question is how fast they can ramp up — that's typically the — there's a bit of variability for us tied to how quickly they're able to ramp. We can ramp fast. What really matters is how fast they can.

Chip Moore

analyst
#13

Yes. Indeed. That sounds excellent. Alright. And it's wonderful to witness the SMC progress. You know, I suppose looking ahead, you know, the further possibility for more chances in that area, you know, what are you observing within that channel and the potential for SMC sales?

Eric Palomaki

executive
#14

Yes. Chip, we did extremely well during the fourth quarter, like we said, plus the $21 million annual run rate secured last year. There are quite a few projects we're working through. Extremely optimistic and sure that, that will be a solid opportunity. We kicked that off roughly 12 months back, slightly more than 12 months back, we began that initiative, and it's turned out really well. We believe in it, and we're pleased with that choice; we still have a bit of capacity remaining for the upcoming year, even though we're approaching the stage where within the next 12 to 18 months, we might have to bring on more capacity for compound; that's just how well it's gone.

Chip Moore

analyst
#15

Good problem.

Eric Palomaki

executive
#16

Yes. Good problem.

Chip Moore

analyst
#17

Right; is there anything else new regarding the expansion? Everything seems to be going along nicely. Are there any significant obstacles, or approvals, or whatever else still left to handle, or does it appear to be fairly easy going?

Eric Palomaki

executive
#18

Nope, it has gone quite smoothly. I want to give credit to the crew we have in Mexico. They have performed an absolutely amazing job handling components of equipment as large as the base structures and the setup required to install 30-ton cranes along with 4,500-ton presses. I'm telling you, that is enormous infrastructure, and they put in tremendous effort through the holiday period and Christmas time on into January. The new factory, you know, is finished now. There are signs up on it. I believe we have a few photos of it available somewhere, but yeah, they are simply doing fantastic work. A few products have already been relocated. Product is already being shipped by us from the new site in Monterrey. Over the past couple of weeks, several loads have in fact departed from that facility, which is fantastic. So later this year, we are eager to showcase it to anyone who might want to come by.

Chip Moore

analyst
#19

Yes. That's great. I can't wait for the fall, and we'll be seeing you in California a few weeks from now.

Tom Klugas

analyst
#20

Impala Capital here today. Anyway, spending on Mexico was pretty big this year. So my question is, does that come down significantly next year? You also began discussing possible SMC expansion. It caught me off guard that you did $21 million this year. My other SMC question is that, for whatever reason, the press release was very specific about the SMC ramp being late Q3, and I didn't get it. It came across as oddly specific. I wasn't sure if there was anything to say about that. The reason I'm asking about CapEx regarding the new wins is, will most of it go into the existing plants in the U.S., or will you drive better utilization from the Mexico plants for some of the new business being signed?

Dave Duvall

executive
#21

Yes. Those are great questions. On CapEx, I'll address the first part. During 2025, we spent about $6.5 million in capital on the Mexico expansion project. For 2026, our forecast is $18 million to $20 million, and that lines up with what we said before regarding $25 million, which I think we disclosed in Q3 of last year; we're still at that run rate, and we're expecting $18 million to $20 million in '26.

Tom Klugas

analyst
#22

But during 2027, the Volvo initiative gets rolled out.

Dave Duvall

executive
#23

Correct. That one is going to be dedicated to the Volvo roof program over in Matamoros, and production there kicks off in the first quarter of 2027.

Eric Palomaki

executive
#24

Regarding the second part of what you asked about SMC compound — to be precise, we secured $21 million in annual run rate wins, though not every one of those has started up yet. Roughly 1/3 are now launched and in production. Over the past quarter to two, I'd say we've been operating at a run rate of 7 million pounds annually for that product line. As Tom and I have discussed, testing continues on a number of those, particularly with the large OEMs, where the product undergoes validation, and a project can require 12 to 18 months before reaching full production. For SMC compound, that timeline is certainly shorter. We believe several of these are 1 to 3 month type tests, and by Q3 of this year we'll have all of them up in production; so the entire $21 million will be in production by the end of Q3. Certain of those tests are things like UV tests, where the part must undergo 2,000 hours of ultraviolet, you know, sun exposure, and there's simply no way to accelerate that. You just have to wait until that testing finishes. The third question, I believe, was about CapEx — we're focused on raising our utilization of existing assets so that another compounding lines purchase isn't necessary. We have 2 of those in Columbus, Ohio, as I think you recall. In '26 we're definitely not going to do that, since we're completing all the remaining CapEx for Volvo that Alex mentioned. But come '27, '28, we might need to bring on more additional capacity for compounding. More to come there — as we succeed in compounding, that could become a problem where we do want to add capacity.

Tom Klugas

analyst
#25

Alright, so following up on that, what was your SMC sales volume for 2025? And also, going back to the utilization question — the entire Mexico CapEx figure is tied 100% to Volvo. What I was really trying to get at is that it looks like a substantial amount, so I wasn't sure whether any of the new programs would be located in Mexico, or whether all of them are primarily at North American plants.

Eric Palomaki

executive
#26

Out of that $25 million in CapEx, I'd say $20 million relates to the roof program. The remaining $5 million covers the new greenfield facility — the 200,000 square foot plant in Monterrey — plus the added capabilities we've discussed, such as top coat paint that we've brought into that site. Those investments will definitely provide us with greater capacity, and also serve other customers beyond that one. So that facility has room for growth.

Alex Panda

executive
#27

I think optimizing the footprint in Mexico as well to benefit customers.

Eric Palomaki

executive
#28

Yeah. We moved that product family over to Monterrey, which means rather than traveling 180 miles, it's going to travel 1 mile.

Dave Duvall

executive
#29

Right, and there's another point, Tom — I realize we've discussed this before — which is that with our Volvo contract, we built in some safeguards around our capital spending. So should volumes fail to reach specific thresholds, the money we put into capital is shielded under the terms we have with Volvo.

Alex Panda

executive
#30

It was reimbursed.

Tom Klugas

analyst
#31

All right. And regarding SMC for 2025, do you have a figure for that or not?

Eric Palomaki

executive
#32

Out of that $63 million in new wins, $21 million came from SMC compound.

Tom Klugas

analyst
#33

No, what I wanted to know is what portion of this year's revenue? Did SMC contribute any revenue during 2025?

Dave Duvall

executive
#34

Yeah. We don't break that out specifically. Let me figure out how best to respond to that. Regarding the — so as Eric just — right — Eric put it at 1/3. So 1/3 of it has already launched and showed up in our 2025 numbers. And Yamaha is the other customer we sell to, Tom. So you could check the major customer footnote, and part of that consists of SMC sales. Not the whole thing, but a sizable portion of SMC sales.

Bill Dezellem

analyst
#35

I have a couple of separate questions. To start, when it comes to SG&A, could you explain what factors made it possible for you to bring those expenses down by such a large amount in Q4 compared with the same quarter last year?

Dave Duvall

executive
#36

Sure. In Q4 of last year, we carried out a fairly significant reduction in headcount, and that played a role. Beyond that — and you can find this in our earnings release — there were year-over-year severance costs in Q4. A year earlier, those costs came to $1 million, while this time around they were just $0.5 million.

Bill Dezellem

analyst
#37

Beyond that, did SG&A undergo any significant structural change? To a certain extent, I'd imagine the layoffs played a role, since they may have had an impact, but I'll leave it to you to respond.

Dave Duvall

executive
#38

Sure. Going forward, we expect our SG&A run rate to land in the range of $30 million to $32 million. Then for 2026, you'll have to factor in the one-time expenses we're outlining in our press release. That means $2.5 million tied to the Monterrey facility, which we can't capitalize, plus another $1 million for succession planning costs.

Bill Dezellem

analyst
#39

And next, could you go into a bit more depth regarding what is going on with powersports and that increase? I recall you mentioned an SMC win in that space. You brought up powersports recovering, but I'm hoping you can share additional specifics about the forces driving the powersports market's rebound and perhaps more about that Yamaha SMC win.

Eric Palomaki

executive
#40

Sure. Let's begin at the broadest level, the overall powersports market. There was that COVID surge during '21 and '22, followed by a slowdown into, say, '24 and '25. That's beginning to recover now. So just the overall number of vehicles rolling off lines, that dealer inventory that still needs to be sold, and the used market having some accumulated demand for vehicles — that has largely worked its way through the system, I'd say, correct? And so we're back to a typical run rate; assembly plants are producing more personal watercraft, more side-by-side, more ATVs than they did 12 months ago. So we receive that macroeconomic tailwind. And then at a very specific level, we introduced several platforms during the past year. A few of those appeared in some of our investor decks, and platforms such as a skid plate. You may recall, Bill, we discussed that it is now in full production and performing well, along with a new cargo box and another ATV featuring a cargo box and the SMC for the Yamaha Watercraft. So every one of those launched during the past year. Each of those represents additional brand-new wins, since they sit on a new vehicle or a new part on a vehicle where we already supplied a part. And so all of that fuels our powersports growth. That's essentially the grow wallet share idea we always mention. We return to those customers we've previously won product with and sell them another product; we excel at that, and they excel at purchasing parts from us, and we excel at collaborating with their engineers and getting involved early in that design phase.

Bill Dezellem

analyst
#41

Eric, that's genuinely useful. Now, when you consider those design wins alongside a market environment that's more favorable, do you expect that in every single quarter of '26, powersports would exceed the equivalent quarter in '25?

Eric Palomaki

executive
#42

Comparing '26 against '25, I'd guess the answer is yes — growth on top of the previous 12 months — though I'm checking with Alex to confirm.

Dave Duvall

executive
#43

Yeah. I mean, when you look at the entire year, our projection is that it goes up, particularly considering what we've already observed in 2026. To stand here and claim, hey, each and every quarter will rise. That's not something I can say right off the bat. But yeah, across the whole year.

Bill Dezellem

analyst
#44

So, pushing that a bit more, you aren't aware of any particular things regarding customer plans, and so on, that would cause a quarter to decline, but you simply want to be realistic when responding to the question. Is that right?

Dave Duvall

executive
#45

Right. Right.

Eric Palomaki

executive
#46

Good definition of how we answer questions.

Dave Duvall

executive
#47

The first and second quarters ought to show gains, which we attribute to the skid plates — those came to market during the third quarter of 2025. So both Q1 and Q2 should rise, and after that, we'll simply have to observe how powersports demand shapes up across the latter six months of the year.

Eric Palomaki

executive
#48

Sales remain robust for us on the more industrial end of the ATV lineup, including the Rangers and similar offerings, along with side-by-sides and work trucks.

Bill Dezellem

analyst
#49

Nice work on a strong quarter.

Eric Palomaki

executive
#50

We appreciate that you keep following what we're doing. In 2 months or so, once we share our first quarter numbers, we'll be glad to walk everyone through how things are going. Enjoy the rest of your day.

Operator

operator
#51

Thanks. That brings today’s call to a close, so you’re free to hang up now. We appreciate you taking part.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Core Molding Technologies, Inc. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.

Get the API View API docs →

This call discussed

For developers and AI pipelines

Programmatic access to Core Molding Technologies, Inc. earnings transcripts and 132,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Core Molding Technologies, Inc. or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.