Core Molding Technologies, Inc. (CMT) Earnings Call Transcript & Summary

November 4, 2025

NYSE American US Materials Chemicals earnings 39 min

Earnings Call Speaker Segments

Sandra Martin

executive
#1

Thanks, and good morning to all of you. We're glad you could be with us on this Core Molding Technologies call, where we'll go over what we achieved in the third quarter of 2025. On the line with me today is the company's president and CEO, Dave Duvall, along with our COO, Eric Palomaki, and our CFO, Alex Panda. This call is being webcast, and you can reach it at CoreMT.com through an audio link located on the investor relations, events, and presentations page. Today's call, which includes the Q&A portion, is going to be recorded. Please keep in mind that time-sensitive information might no longer be accurate as of whenever a replay is heard or a transcript is read. I'd also like to remind everyone that what we discuss today is not historical fact — this includes statements or expectations regarding future events or future financial performance, or forward-looking statements — and these are offered under the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. Forward-looking statements carry uncertainty and lie outside the company's control. Actual results could differ materially from those expressed or implied. For our disclosures on forward-looking statements, please see today's earnings release; the factors involved, along with other risks and uncertainties, are described in detail in the company's filings with the Securities and Exchange Commission. Core Molding Technologies is under no obligation to publicly update or revise any forward-looking statements. Management will refer to non-GAAP measures, among them adjusted EPS, adjusted EBITDA, the debt to trailing 12-month EBITDA ratio, free cash flow, and return on capital employed. Reconciliations to the nearest GAAP measure can be found at the end of our earnings release. Our earnings release has been submitted to the SEC on Form 8-K, and at this point I'd like to hand the call over to the company's president and CEO, Dave Duvall.

David Duvall

executive
#2

Thanks, Sandy, and I appreciate everyone being here today. The positive momentum we talked about last quarter has kept building and is still solidly with us. The sole adjustment versus what we shared in our Q2 update concerns when our tooling revenue lands, which has moved to Q4. Just to remind everyone, tooling involves repeated rounds of fabrication, testing, and finally the customer's formal sign-off, so forecasting precisely when revenue gets recognized is inherently difficult. Across the trucking sector, a number of projects are still paused while we wait for more clarity on where the administration's policy is headed. Even so, throughout this year and this quarter we've kept delivering meaningful progress across our next biggest verticals. In Q3, sales rose year over year in our power sports, building products, and industrial and utilities markets, which shows the ongoing traction from our investment growth initiatives plus a slow easing of market conditions. Power sports, a key sales category for Core, posted its first year-over-year increase in eight quarters, returning to growth following two full years of declines. We think this momentum is driven by a mix of new product introductions and our ongoing wallet share growth. For instance, we are now in full production on the UTV skid plates. During Q3, we successfully rolled out the UTV skid plate program that we've talked about on earlier calls. We're seeing indications of demand recovery in power sports, supported by expectations that interest rates will keep coming down and by new launches. That mix is producing a more active demand environment across both water and land power sports as we move toward 2026. On the skid plate program in particular, once fully ramped we expect it to produce roughly $8 million in annual run rate revenue. Although this category is still somewhat seasonal, we think power sports is set up for a stronger rebound in 2026, especially with a more favorable interest rate environment after recent cuts and with new program launches. Last quarter, we pointed to $46.7 million in new business wins this year, 99% of which is incremental; that adds to the $45 million in wins from last year. We're happy with the momentum and excited about our known future growth, and we keep seeing further opportunities in a robust sales pipeline exceeding $250 million. That said, we recognize there are still plenty of chances to take advantage of the execution improvements we've made, so we continue to invest in and aggressively refine our sales systems. This has always been the final phase of the Core Molding transformation, and it's our current must-win battle as we push to leverage all the business execution improvements and unlock the earnings potential of our improved capabilities. To speed up growth even more, we've put a value selling program in place, and we're adding three new business development roles that are focused on and incentivized to expand wallet share with key partners and drive lead development for our new sheet molding compound opportunities. During our previous earnings call, we talked about finishing a market study to figure out the total addressable market for SMC in North America. In Q3, we worked alongside four prospective clients who ran molding trials on our material and gave us favorable responses. Given how well those initial product trials went with those first customers, we feel good about the market opportunity we have right now. As we mentioned before, the quote-to-cash timeline for this product runs about six months, compared with 12 to 18 months for our completely engineered product; we're happy with how diversified the end markets are across these trials, covering electrical boxes, multifamily commercial doors, buses, and roofs and hoods for truck customers. We're still concentrated on expanding our sales and marketing efforts to push Core's proprietary SMC product as a raw material for important customers. We believe the total addressable market for this product is more than roughly $200 million. Our emphasis on operational enhancements and critical investments in our SMC operations has greatly boosted our capacity, consistency, and performance, which we view as essential value propositions as we work with customers in this market; we've long considered our advanced formulations a major competitive edge for Core, and now that we're dealing directly with SMC customers, we plainly recognize our product and service benefits compared to what their existing suppliers offer. To be specific, Core offers more uniform material, know-how in adjusting SMC formulations to satisfy particular molded part needs, and Core delivers much faster lead times. Every one of these elements generates substantial value for our customers, especially those whose finished goods are designed around Core's sheet molding compound. That's how it always works with SMC. Progress continues on our strategic $25 million investment, and layouts are finished for the Matamoros expansion along with the new greenfield build in Monterrey, Mexico. Monterrey was engineered to supply extra capacity for upcoming growth in low-pressure injection molding and DCPD processes. Beyond that, we're introducing top-coat paint capabilities at this facility because customers have explicitly requested this ability, particularly in the construction and agricultural machine market; we think the Monterrey area will keep expanding and holds considerable long-term promise for us. We've also placed orders for two new cutting-edge 4,500-ton compression molding presses, and we've finished the automation design and plant layout for a sleeper roof program at our Matamoros facility. Tooling revenue from these programs should come to about $35 million and is anticipated to be recorded in 2027. Organic growth stays our number one priority within our capital allocation strategy, and this investment doesn't just back the launch of a major truck program — it also brings DCPD molding and top-coat paint capabilities into our Monterrey business. We're serving expanding industries, the Con Ag market included. Bringing in DCPD molding puts us nearer to key customers who place high value on this process. On top of that, our new top-coat paint capabilities let us provide final top-coat painted products that our customers can install right away. This represents a major benefit we're delivering to our customers — it brings down total cost and streamlines everything from when an order is placed through to a completed product. Taken together, these investments broaden what we can do technically and open up fresh, lasting sources of revenue. Our visibility into the recovery of the truck and power sports sectors is solid, and that's what gives us confidence we can reach total revenue of more than $300 million in 2027. Over the coming 7 to 10 years, these long-term programs should bring in roughly $150 million in revenue. Looking at our current projections for truck, power sports, and other end markets that are growing, we anticipate annual product revenue will surpass $325 million inside the next two years. Now for our Q3 financial results: revenue came in at $58.4 million, a decline of 19.9% versus the prior year, and more than half of that sales drop stemmed from the known Volvo transition, while the rest came from lower demand in other truck areas. Gross margin stood at 17.4%, landing inside our target band of 17%-19%. Adjusted EBITDA margin was 11%, an improvement of 70 basis points compared with a year ago. Cash flow from operations for the first nine months of the year came to over $14 million, still running ahead of our year-to-date net earnings. Once again this quarter we posted stable gross margins within our projected range, along with positive year-to-date free cash flow. The third-quarter sales declines were larger than we had anticipated, but the new business wins are there, and our investor growth efforts keep ramping up. We expect fourth-quarter sales to rise year over year, mainly because of a significant increase in tooling sales. On the subject of executing our ongoing succession plan, Eric and I are collaborating closely across every facet of the role as we keep moving toward the CEO succession plan for May of 2026. As I've mentioned before, we have strong systems in place for organizational development and succession planning at every level of our organization. Alongside our succession plan for Eric, we've built a strong bench beneath him, including an Executive Vice President of Mexico operations, Arnold Alanis, who has been with Core for over 13 years, and our Executive Vice President of U.S. and Canada operations, Mike Gayford. Arnold and Mike have taken part in the whole leadership transition over the last year, and I appreciate how much more engaged they've become in our business, which frees Eric to concentrate on transitioning to CEO. In my view, our culture is a competitive advantage, and a key benefit of that strategy is our capacity to develop and grow leaders from within Core Molding, as shown by our ability to promote new executive leaders from inside the organization. I think that speaks to how effective our organizational development and succession process is. Now I'll turn the call over to Eric to share his comments on our new production and operational efficiency efforts.

Eric Palomaki

executive
#3

Thanks, Dave, and good morning to everyone. A significant new program opportunity we've recently added is a major rail infrastructure effort up in Canada. The cable railway containment trough system is designed to take the place of concrete systems, which were costly, slow, and required a great deal of labor to install. With the conventional approach, a shallow trench gets dug by crews, and a crane is then used to hoist and place each concrete piece. What makes our proprietary polymer and composite troughing advantageous is that it is lightweight, non-conductive, simpler to put in, and produced from recycled materials, which cuts both installation labor and lifetime maintenance costs. I'd also like to give you an update on the footprint optimization initiative that kicked off at the close of the second quarter, and which should wrap up by year-end. Given our continued emphasis on profitability at the product level, the present softness in truck demand opened the door for us to consolidate our RTM, or Resin Transfer Molding process, by deliberately moving certain programs into a different one of our facilities. This strategic step will make operations at the originating site more efficient and should bring about additional margin improvement. Finally, I want to recognize our operational teams for achieving 99% on-time deliveries along with an excellent 62 PPM performance. PPM, a metric tracking the number of defective parts per million produced, is what our customers rely on to gauge quality performance. A rate below 0.01% signals a high level of quality and shows how precise our quality processes are. We've also kept safety incident rates and employee turnover rates low for the industry, something we take pride in. These favorably trending metrics speak well of our culture and our commitment to excellence across all our people and our plants. With that, I'd like to hand the call over to Alex to run through the financials.

Alex Panda

executive
#4

Thanks, Eric, and good morning, everyone. Net sales for Q3 were $58.4 million. As Dave noted, the drop in product sales was mostly connected to the Volvo transition we'd already disclosed. With that Volvo transition factored in, sales declined 8.7% from the prior year, reflecting weaker demand, primarily in the medium and heavy-duty truck verticals. Partially offsetting that were revenues from new products sold to customers in power sports, building products, and the industrial and utilities markets. Despite the operating deleverage in the third quarter, gross margin remained at $10.1 million, equal to 17.4% of sales. Over the past 12 months, we've undertaken several initiatives designed to improve operational efficiency, bring raw material costs to an optimal level, and enhance overall margin performance. Those steps have helped offset the fixed cost deleveraging associated with the planned Volvo transition, and we continue to expect our gross margin to remain within the 17%-19% target range established for the year. SG&A expenses for the third quarter totaled $7.6 million, or 13% of sales, compared with 12% in the same quarter last year. Excluding the $220,000 related to footprint optimization costs, our SG&A rate for the quarter would have been 12.6%. As Eric discussed, our footprint optimization project is now underway. We've invested $500,000 in it so far, and by the end of 2025 we plan to invest $1.5 million. Again, this project involves relocating production to another plant so we can realize cost savings exceeding $1 million annually, beginning in January of 2026. Operating income for the quarter was $2.6 million, or 4.4% of sales, down from $3.6 million, or 4.9% of sales, in the equivalent period last year. The interim effective tax rate for the third quarter was 29.3%, versus 18.7% in the prior year quarter. That increase resulted from taxable income being generated this quarter in jurisdictions with higher tax rates. Net income for the third quarter was $1.9 million, or diluted income per share of $0.22, compared with net income of $3.2 million, or diluted EPS of $0.36, in the comparable year period. If you exclude the impact of footprint optimization costs, our third quarter diluted EPS would have been $0.24. Third quarter Adjusted EBITDA was $6.4 million, or 11% of sales; we generated $14.2 million in GAAP cash from operations and, after capital expenditures of $9.3 million, our free cash flow was $4.9 million for the first nine months of 2025. We continue to expect the 2025 capital expenditures to be approximately $18 million to $22 million, including investments for the Mexico expansion. As we announced earlier when the Volvo Mexico business was awarded, the company will invest approximately $25 million across the next 18 months. As of September 30th, our balance sheet stayed solid, featuring total liquidity of $92.4 million, which consists of $42.4 million in cash along with $50 million accessible through the revolver and capital credit lines. At the close of the quarter, the company's long-term debt was $20.3 million, and for the trailing 12 months, our debt-to-EBITDA ratio remains below one times. Return on capital employed was 6.5%, and excluding cash, that figure reached 8.7%. With new business continuing to launch, we expect this metric to improve through greater leverage of top-line performance and by pushing for better asset utilization. For both ROCE figures, the computation relies on operating income and total capital employed across the trailing 12 months, and it's measured on a pre-tax basis. Our earnings release includes the GAAP to non-GAAP reconciliation tables, so kindly consult those. Regarding capital allocation, our approach remains flexible, with substantial focus on organic growth, alongside disciplined handling of debt, working capital, and share repurchases. Thus far this year, $2.5 million has been directed to Mexico expansion projects, and we expect to spend $7.5 million altogether by the end of 2025, plus $17.5 million in 2026; over the three months that concluded September 30th, we repurchased no shares, and as of today this year, 151,584 shares have been bought back at an average price of $14.80. For the entire year, our sales outlook is down 10%-12%. Nevertheless, we've projected a rise in fourth-quarter sales, driven by new program launches and tooling sales that are considerably higher. As a reminder regarding tariffs, our products in Canada and Mexico are both USMCA compliant and currently exempt from tariffs. We will continue watching closely how shifts in trade policies impact our customers and their end markets, and with that, I'd like to turn it back to Dave. We continue to expect the 2025 capital expenditures to be approximately $18 million to $22 million, including investments for the Mexico expansion.

David Duvall

executive
#5

Thanks, Alex. Everyone here is enthusiastic about both the new customers we're bringing on and the ones we already have, along with the end markets we serve. Just like Eric said, we're in the final stages of working out the details on a sizable Canadian project involving the cable railway containment trough system — that one carries a value of roughly $15 million in yearly revenue, and it begins in the back half of 2026. We keep seeing a robust set of opportunities, with business development potential exceeding $250 million sitting in our pipeline. Our view is that we can bring in more than $40 million of fresh wins, with awards coming through within the coming three to six months. This year's wins also have us energized, since they land in markets that are new and emerging for Core. Those newly targeted markets cover pickup box panels built for small EV trucks, systems for satellite tracking, and applications in trucks. Our plan is to grow the DCPD molding process for big OEMs in the regions we already cover, and we've brought top-coat paint into what we offer through our full-service partner model. Investment in our sales organization keeps going, and we're pushing relentlessly to bring on new customers who will entrust us with their business over the long term. Eric and I remain sharply focused on scaling operations further, making the most of our fixed cost space, and refining our portfolio footprint. Staying dedicated to ongoing performance gains — particularly given today's softer demand — puts us in position to turn top-line growth into bottom-line outcomes; the future has us excited, and we look forward to capitalizing on every improvement, together with the $65 million of incremental wins we've secured over the past 20 months. Strengthening our operations remains a priority, and we'll take whatever steps are needed to build long-term business capability and profitability. We're going after the strongest opportunities in new markets while growing wallet share among the long-term customers we currently serve. Our confidence is high that this is just the start. Fresh areas keep appearing, and we'll keep evolving within the construction sector — commercial windows and doors being one example. We concentrate on large, diverse sectors including construction, energy, industrial, aerospace, and medical markets, and we've shown we know how to win; we're working to get our sales and technical teams involved sooner in the design cycle so wallet share expands and customers learn about the full range of value-added capabilities we bring, among them SMC formulation, large-part molding, and top-coat painting. What customers want is a strategic partner such as Core Molding to take care of design, fabrication, and completion including the top-coat paint. Our teams stay dedicated to upholding our must-win battle excellence by, first, pushing incremental sales growth into new markets; second, enhancing our margin profile via operational excellence and our innovation pipeline; and third, consistently investing in growing a business that has shown it can execute well. Even though forecasts for the truck industry remain soft for Q4. ACT and customer forecasts point to a truck build increase during the second half of 2026. As we talked about last quarter, the great pause — the phrase one customer used — is still with us, with decisions delayed and major markets still operating in a demand environment below what was expected. Worries about tariffs have led businesses to hit the brakes, and we've observed postponed demand and, even more noticeably, hesitancy around greenlighting new programs. That said, in recent weeks we've picked up signals that things are steadying and that demand is coming back across a number of our important end markets; we're discovering ways to bring in new customers and grow wallet share among those we already serve. Our critical fight — investing for growth — carries on, and it shows in how confident we are about putting substantial money into future growth. Building a premier engineering and manufacturing solutions partner for large and ultra-large molded solutions remains what we're aiming for. Once more, I'd like to express gratitude to our team for the effort and commitment to excellence they bring, which has let us notch up wins all along our transformation journey. My thanks also go out to our customers, our investors, and our board for trusting in what we do each day at Core Molding. Last, we'll share our investment story and hold one-to-one meetings at the Southwest IDEAS Conference in Dallas on Wednesday, November 19th. If you'd like to meet us there in person or arrange an investor call shortly, please get in touch. With that, we'll take questions on the line. Operator?

Alfred Moore

analyst
#6

Morning, and thanks for taking my question. Hello, everyone.

Alex Panda

executive
#7

Hey, Chip.

Eric Palomaki

executive
#8

Hi, Chip.

Alfred Moore

analyst
#9

Fine. Hey, there's a great deal of chatter about tariffs, particularly in trucking. I believe certain measures were delayed from October until November. Could you share your latest perspective on those specific tariffs, any possible effects, or what you're hearing from customers about them?

Alex Panda

executive
#10

Yes. What I'd say is that every one of our products meets USMCA requirements. Therefore, as of now, based on what we understand, we remain exempt. What worries us more is how this might affect customer demand later on. That said, at this moment, we aren't yet seeing any tariff-related impact.

Alfred Moore

analyst
#11

Understood. Alright. No, that's useful, and I suppose that aligns with what you were saying.

Alex Panda

executive
#12

From an operations perspective as well, Chip, I'd say that we run facilities in both the U.S. and Canada, and should the need arise, relocating isn't a quick adjustment, though it can always be done. Right, and the one other point I'd mention is that raw material adjusters, or RMA, are built into every one of our contracts, so in the event a tariff and higher costs come our way, passing those along to customers is something we're able to do.

Alfred Moore

analyst
#13

Understood. That helps. Perhaps I could build on that. Looking ahead, your visibility toward $300 million or more seems pretty solid. Just. When we consider 2027, I suppose. What are the largest risks to that, or. What's the upside there? And then regarding trucking, what have you factored in as we look toward maybe 2027?

David Duvall

executive
#14

Yeah, excellent question. So. From a big-picture standpoint, like we mentioned, our quote-to-cash cycle runs 12 to 18 months; therefore, as we're aware, the Volvo program is set to launch only in 2027, plus we have $45 million of wins from the previous year along with $47 million of incremental wins in the current year that we expect to layer in across the coming 18 months. That's the basis for what we're saying. During their ramp-up, you begin with a ramp and perhaps you're ramping across six to seven months before reaching full volume; that's when we start to see sales coalescing; so we're quite enthusiastic about it. In our current conversations with truck customers. And reviewing ACT, what we're observing is that we think truck, or rather they think truck, will begin recovering in the back half of next year. Possibly the largest worry — we spoke with one customer yesterday — was the magnitude of the increase they were anticipating heading into the second half of next year, which was substantial; so I'd say following yesterday, our largest worry became just how quickly the truck market will rebound, since it can recover quite rapidly. And the ability to hire and satisfy all of those requirements during the upswing. Because it rises as quickly as it falls. And the deeper it declines, arguably the more probable it is that it will climb.

Alfred Moore

analyst
#15

Great. Could I follow up with something else? Looking at things a bit closer in, tooling revenue has shifted into Q4. Do you have any thoughts on how we should model tooling revenue for Q4, and perhaps across the coming few quarters, given all the new programs coming down the pipeline?

Alex Panda

executive
#16

Sure. Across the whole of 2025, we expect tooling to account for about 15% of total sales for that year. Also, bear in mind, Chip, that those revenues carry a thinner margin than what we see on product sales. Then looking ahead to the following year, 2026 — I should say we aren't offering any numeric guidance for 2026 — the Volvo Mexico tooling project will wrap up. It will finish at the close of 2026, possibly pushing into 2027, so December of 2026, or perhaps January of 2027.

Alfred Moore

analyst
#17

Understood. All right, then a modest unfavorable mix effect in Q4 stemming from greater tooling sales. Is there any framework for considering gross margins?

Alex Panda

executive
#18

Hi, Chip, though simply.

Alfred Moore

analyst
#19

Yeah, sorry.

Alex Panda

executive
#20

Yeah. So margins are going to dip somewhat, but our guidance still stands that we'll land inside the 17%-19% target we've been putting out there every quarter and for the whole year.

Alfred Moore

analyst
#21

Right. That's exactly what I had in mind to ask about, and my follow-up was going to be about the longer term, once the tooling settles down. Should we still be thinking in terms of 17% to 19%, or do you believe there's room for upside eventually if volumes run higher?

Alex Panda

executive
#22

Yes. Once we're back up around $300 million, I believe there will certainly be some upside. What I mean is, we'll recover some of that fixed leverage. It'll swing back in our favor; so my estimate is that this is worth roughly 200 basis points. If you look back at prior quarters and examine how much leverage was lost in each one, then yes, going back two years, we gave up approximately 200 basis points; so adding 200 basis points, I'd say, is the right frame for it.

David Duvall

executive
#23

Right. And another thing we think matters is this: when it comes to those new programs, the systems we've implemented and the way we price out business, that's certainly adding to margins.

Alfred Moore

analyst
#24

Great, sounds good.

David Duvall

executive
#25

Even so, I'm not ready to tell you the amount at this point.

Alfred Moore

analyst
#26

Got it. Okay. I'll get back in the queue. Let other people ask. Thanks.

Alfred Moore

analyst
#27

Thank you. I only wanted to confirm I wasn't dominating the call. Maybe just one additional item from me regarding new business opportunities. The Canadian Rail Project is a good win, and there's potential for comparable projects. Then for SMC, what's the momentum like? Sounds like things are going quite well. But is there anything further you can share?

David Duvall

executive
#28

Sure. That breaks into two pieces, Chip. First, regarding the rail Trojan troughs. That business was actually ours during 2022 and 2023. It's usually project-driven whenever a city or municipality installs a stretch of rail. For us it's a major project lasting a couple of years; so we went a couple of years with none; and right now we have another one where a test track is being built for next summer. That should then become that larger multi-year program. So we're enthusiastic about it. I can't claim we've completely secured it, but we're definitely involved with the test track and feel we're well positioned to capture the full installation. Your second point concerned SMC. We included some remarks about it. Since the prior quarter, we have 4 very specific customers that are trialing, and actually molding parts, with some of our engineering teams collaborating alongside them. So significant headway was made with 4 among the 10 customers we had targeted. And so we expect within the next quarter or so, we'll have awards or agreements with certain of those customers to share during our next earnings.

Alfred Moore

analyst
#29

Great. Alright, and finally, regarding the repurchase program — you didn't execute any during this quarter, but could you remind us of what your authorization stands at? Thanks.

Alex Panda

executive
#30

Yes. There's approximately a bit more than $2 million remaining under the buyback. As of today, it remains active. That said, we still intend to make use of it as a means of deploying our capital.

Alfred Moore

analyst
#31

Excellent. Alright, I appreciate all the detail. Thank you for that.

David Duvall

executive
#32

Thank you, Chip.

Eric Palomaki

executive
#33

Thanks, Chip.

Bill Dezellem

analyst
#34

Thank you. A few things I'd like to ask. Could we begin with you taking us through the tooling business that moved out of Q3 and into Q4? What was driving that?

Alex Panda

executive
#35

So, tooling broadly speaking — Dave covered some of this during the call — but revenue recognition for us requires the customer's acceptance of the tooling. That means there are many sorts of tests involved. Full production run tests have to be done. Quality tests have to be done. Specifications vary. So sometimes, when you're working alongside a customer, those tests slip for various reasons. One reason could be that the customer chose to make engineering changes. And so in this instance, one of our larger tooling jobs, which we had initially believed would wrap up in Q3, slipped into Q4; those tests are something we're in the middle of performing right now. As I see it at this moment, that particular job isn't being moved out any further. But that's the nature of tooling, more or less; the amount of control we have is limited. We're able to push customers as hard as possible and collaborate with them. Even so, there remains a risk that a job slips from one quarter into the next; ultimately, though, that revenue isn't lost. It's only a matter of timing.

David Duvall

executive
#36

Hello Bill, that's also one angle we take on this. Often, when there's a significant delay, we're not the cause. What they're actually up against involves the whole product level. They're doing their best to bring all the pieces together. In the best scenario for them, each supplier, each validation test, everything functions properly, and then they receive complete approval. If even one of those items fails, the whole supply base lacks PPAP approval. So the moment PPAP approval comes through, we book the revenue, since that's a document with a signature on it. That said, should that PPAP be delayed over an extended stretch, we would definitely step in and speak with the customer, saying, "Look, waiting an entire quarter for this isn't something we can do." However, when it's just a matter of weeks, it's likely not worth applying that kind of pressure.

Bill Dezellem

analyst
#37

That helps a lot, thank you. Next, you mentioned the footprint optimization you've been working on and said it would deliver solid cost savings. Could you take us through, physically, what is relocating from which location to which location, and the reason it's happening? Beyond the financial piece — though perhaps it really is as simple as saving money.

Eric Palomaki

executive
#38

Of course, Bill. You may recall the term resin transfer molding, or RTM parts. Several years back, we operated a business in Batavia, Ohio, that produced almost exclusively resin transfer products. Eventually we shut that plant down and shifted that product to our Matamoros facility and our Columbus facility, and in the end, we've determined we should relocate whatever remained at our Columbus facility to our Matamoros facility, and the workers at our operation there bring 20 and 30 years of experience in resin transfer molding. More than 300 of our employees in Mexico belong to that business unit there, so they're skilled, capable, and engaged, while in Ohio we've had difficulty producing those parts — I'd call them heavy manual labor, tough parts, extremely hands-on work with fiberglass — so in the end, we're simply leaning into the place where our strength and skills reside, and some labor savings come along with it, but the real driver is the technical expertise and the workforce we have that can handle it.

Bill Dezellem

analyst
#39

That's quite useful, and regarding how the figures work out, you mentioned roughly $1 million would go toward the transfer, and that it would generate savings of about $1 million annually. Did I get that right when I heard it before?

Eric Palomaki

executive
#40

Yes. The overall investment will come to around $1.5 million. That covers the cost side, and then there's $1 million per year on an ongoing annual run rate basis, so that's how it breaks down.

Bill Dezellem

analyst
#41

Excellent. Okay. Thank you both.

Eric Palomaki

executive
#42

You're welcome.

David Duvall

executive
#43

We appreciate that you keep following what we do here. Once we release the figures for our fourth quarter, we’re eager to share where things stand. Wishing you a wonderful day. Thanks so much.

Operator

operator
#44

That brings us to the end of today's call, so you're free to hang up your phones now. We appreciate you taking part.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Core Molding Technologies, Inc. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.

Get the API View API docs →

This call discussed

For developers and AI pipelines

Programmatic access to Core Molding Technologies, Inc. earnings transcripts and 132,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Core Molding Technologies, Inc. or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.