Core Molding Technologies, Inc. (CMT) Earnings Call Transcript & Summary

August 9, 2022

NYSE American US Materials Chemicals earnings 48 min

Earnings Call Speaker Segments

Sandy Martin

executive
#1

Thanks so much, and welcome, everybody. We're glad you could be with us on this Core Molding Technologies call, where we'll go over how we did in the second quarter of 2022. With me today are Dave Duvall, who serves as Core Molding's President and CEO, and John Zimmer, our EVP and CFO. You can also listen to this call via webcast — there's an audio link on the Events and Presentations page within the Investor Relations section at coremt.com. A recording will be made of today's call, Q&A portion included. Just a note that information which is time-sensitive might not still be correct by the time anyone replays it or reads a transcript. I'd also like to point out that anything discussed today that isn't a historical fact — such as statements or expectations about future events or future financial performance — counts as forward-looking statements, provided under the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. Such statements are inherently uncertain and beyond the company's control, so actual results could differ materially from what's expressed or implied. For our forward-looking statement disclosures, please see the earnings press release issued today. The company's filings with the Securities and Exchange Commission describe these factors along with other risks and uncertainties in detail. Core Molding Technologies has no obligation to publicly update or revise any forward-looking statements. Management might also mention non-GAAP measures, among them adjusted EBITDA, free cash flow, return on capital employed, and adjusted gross margin. You can find reconciliations to the closest GAAP measures at the end of our earnings release. Last thing: the earnings press release we put out earlier today appears in the Investor Relations section of our website, coremt.com. That release is also part of an 8-K filed with the SEC. With that, let me hand things over to Dave Duvall. Dave?

Dave Duvall

executive
#2

Thanks, Sandy, and hello to everybody on the line this morning. Prior to walking through how the quarter went, I want to begin by recognizing our Executive Vice President of Human Resources, Renee Anderson. This year, Renee was chosen as a 2022 HR Impact award honoree. As you may recall, that honor goes each year to human resource professionals who demonstrate exemplary leadership within their organization, along with significant contributions in the HR discipline and in the communities where they live and work. At Core Molding, Renee truly represents excellence, integrity and HR leadership. The customers and communities we serve have felt her positive impact. Our success and our broader business strategy depend heavily on Renee and the HR team. Any business strategy rests on having a workplace that is open, engaging and rewarding; and we are lucky to have Renee on our leadership team, where she is an asset to the organization. Let me begin with some very recent good news. In the past week, we reached an agreement with Volvo that extends our existing supply agreement through 2027; through this extension, we were able to change terms so that the company recovers raw material costs. Our valued partner also gains uninterrupted service for over 5 years under this agreement. We are excited to keep our relationship with Volvo going. During the prior quarter, John and I discussed with you our IR strategy, which we put in place earlier this year, and explained how we have made proactive investor outreach a priority; the response from the buy side and sell side as we work to raise awareness of the Core Molding story has pleased us. Our view remains that our stock is underfollowed, and we keep working to build transparency and awareness around our company. Now let me move to our ongoing progress. I will begin by covering our major initiatives and mention a few highlights from our 2022 second quarter results. After that, I will hand the call to John for a more detailed review of Q2. Finally, I will return to close out the call, talk about our ongoing sustainability efforts and offer some market outlook. In the past, Core Molding was synonymous with the heavy truck OEM industry. Back in 1996, we bought Columbus Plastics, a division of Navistar International; so legacy stakeholders naturally viewed us as a truck company, pointing out that over 90% of our revenue originated from the heavy-duty transportation industry. In 2015, though, we started transforming the business via strategic acquisitions that brought in thermoplastic presses and specialized material compositions. After that, in 2019, we carried out a major operational turnaround project across the whole company. Most recently, in 2020, we launched 2 important teams, our technical solution sales team and our materials R&D, to develop engineering materials that help customers by solving challenges and creating new products. Rather than calling ourselves a composite company, we started building an innovative business around engineered materials. That intentional chain of events—our turnaround initiative, the transformational and diversification strategies, plus standing up the technical solution sales and material R&D teams across the last several years—carries us into 2022. And as things stand today, medium and heavy-duty trucks account for 39% of product revenues, far under the 90% truck share from only a handful of years ago. Shrinking truck revenues wasn't something we set out to do. What we did instead was deliberately expand into additional industries and businesses by teaming with customers and creating freshly formulated engineered products—either one-of-a-kind answers or greatly enhanced substitutions for conventional materials such as concrete or metal; often we take several components and re-engineer them into one molded piece that weighs less, holds up stronger, resists corrosion and demands fewer assembly labor hours for the customer. We excel at delivering the front-end effort, covering design, development simulation, letting customers build distinctive products and solutions whose fundamental design yields superior performance and longer life. What results is a boundless market for product enhancements, particularly vital right now as costs climb for businesses, and the public sector likewise requires stronger margins and less complicated supply chains; that differentiation unlocks fresh markets and generates fresh demand, exactly what we're seeing through the ongoing momentum in our business. Profitable growth and diversification will remain the foundation of both our business model and long-term strategy. And through the first half of 2022, we've successfully brought in $16 million of net new wins; those net new wins will launch between 2022 and 2024 and come on top of the $75 million of wins we achieved last year. This incremental business diversifies the company's revenues even further by pushing into growing markets such as last-mile delivery transportation, utilities, construction, agricultural and power sports. Quite a few of our existing customer partners recognize the strength of our model and are bringing us in to partner on their other products, which grows our wallet share. Personal watercrafts and all-terrain vehicles illustrate this perfectly. We hold significant market share in the personal watercraft industry, yet some of these companies also sell golf carts, all-terrain vehicles or light utility vehicles. And we're partnering with those teams to explore other engineered material applications. We believe this broader category of utility and sport vehicles supplies additional tailwinds tied to our power sports category; this is merely one illustration of our considerable wallet share expansion possibilities. Following back-to-back record revenue quarters, we're encouraged by business demand for 2022 and 2023. The demand environment lets us be choosier about the new business we accept. We'll keep seeking ways to diversify revenues and produce high-value products, generating better margins. We are ramping up major programs with certain customers and have full production launch in Q3 of the Ford Bronco roof in our automotive category. Bringing major programs online, plus meeting production needs for what we've already committed to, calls for established processes, sufficient capacity, and a committed team at every plant. To make all these new products a reality, we need stable and dependable systems that can respond to shifts in what customers want while still generating operational gains. Every day, we're focused on these efforts. The main engine of our growth remains new business wins. Our present opportunity pipeline is still strong, sitting above $115 million. As you'll recall from our prior call, that figure was much larger, yet the pipeline has come down versus what we reported in the first quarter, since we streamlined opportunities in light of capacity limits and cut out lower value-add opportunities along with projects needing capacity faster than we're able to provide it; at this stage, to keep growing revenue, we're adding capacity by installing 3 new presses plus automation at our current facilities; our preference is to first get the most out of the 6 plants we already have prior to opening an additional location. Now moving to several financial highlights. Following our record quarterly sales for Core Molding last quarter, we surpassed that figure in the second quarter with revenue exceeding $98 million; during Q2, our attention stayed on countering inflation in raw materials and other manufacturing costs, and we constantly seek ways to boost efficiency at our plants. In the second quarter, certain inefficiencies emerged because of elevated customer demand and order fulfillment interruptions tied to customer supply chain difficulties; we're working closely with our customers to handle demand and enhance our production efficiencies. Pressures around material and labor supply have eased but remain challenging at times; therefore, we're keeping a close watch. The key point is that the demand environment is still strong. With that, I'll hand the call to John, who will provide more detail on our overall financial results.

John Zimmer

executive
#3

Thanks, Dave, and good morning to everybody. For the second quarter of 2022, net sales came to $98.7 million, which is a 23% rise compared with the same period last year, while product sales were up 18% over the prior year period. The revenue gains came mainly from stronger customer demand in nearly every industry, launches of new programs, and raw material recoveries. Gross profit in Q2 reached $13 million, equal to 13.2% of sales, versus $13.7 million, or 17.1% of sales, in the comparable quarter last year. The year-over-year drop in margin percentage for the quarter was mostly attributable to a shift in product mix during the period, along with the effect of raw material recoveries, plus production, inflationary pressures and elevated demand tied to plant inefficiencies that we are working to fix. If you set aside the raw material recoveries, gross margin for the second quarter of 2022 would have come in at 14.3%. We have now recouped most of the added costs the company took on because of raw material inflation. And as Dave said earlier, we have reached an arrangement with Volvo on a new long-term agreement that lets us start recovering increases in raw material cost as of July this year. As Dave noted, supply chain stability is back. Even so, prices for certain resins, chemical and hardware components keep rising. Going forward, we will keep passing through changing raw material costs wherever we can. Lastly, we are keeping a close eye out for shifts in customer demand, which we might see in the latter part of 2022 or in early 2023 should recessionary pressures grow. SG&A expenses for the quarter were $8.7 million, against $7.6 million in the prior year period. While SG&A dollars rose mainly because of labor, insurance and professional fees during the quarter, measured as a percent of sales, SG&A for the quarter was 8.8%, an improvement of 60 basis points from a year ago. During the second quarter, the company posted operating income of $4.4 million. Q2 net income came to $2.2 million, or $0.26 per share, versus net income of $4.1 million, or $0.48 per share, in the second quarter of 2021. Adjusted EBITDA for the quarter was $7.9 million, or 8% — a strong second quarter despite the comparison with $9.7 million in the prior year quarter. The GAAP to non-GAAP reconciliation of adjusted EBITDA financial measures can be found at the end of this press release. As we talked about on our last call, our strategic revenue diversification plan keeps making progress, with product revenue for the second quarter made up of 39% truck, 23% power sports, 16% building products, 9% industrials and utilities and 13% other. Now turning to the first half results. Net sales for the first 6 months came to $189.3 million, up 24% from a year ago, and product sales rose 24% versus the prior year period. The sales increases were mainly driven by customer demand across all industries, new program sales as well as raw material recoveries. For the opening six months, gross profit came in at $27.6 million, which equals 14.6% of sales, versus $26.5 million, or 17.3% of sales, during the same stretch a year earlier. Just like what we saw in the second quarter, the compression in our first half margin percentage stemmed mainly from a shift in mix, raw material cost recoveries that carried zero margin, plus other inflationary pressures on the production side and operational efficiencies. If you set aside those raw material recoveries, our gross margin across the first 6 months would have landed at 16%. SG&A costs during the first half reached $17.2 million, up against $14.9 million for the comparable period last year. Operating income over the first 6 months totaled $10.4 million. Net income for the first half of fiscal 2022 summed to $6.1 million, or $0.71 per share, versus net income of $7.5 million, or $0.89 per share, a year ago. Adjusted EBITDA for the first half stood at $17.5 million, or 9.2%, compared with $18.2 million in the prior year. GAAP to non-GAAP reconciliations covering the adjusted EBITDA financial measures are available at the conclusion of today's press release. Now let's shift to the company's financial position, cash flow and balance sheet. Cash generated by operating activity for the company amounted to $2.9 million across the first 6 months that ended June 30, 2022, while capital expenditures during that same period totaled $8.6 million. Growth in the business has driven up working capital, which in turn has pulled down our cash flows from operations. Roughly $5.2 million of the year-to-date capital expenditures went toward capacity increases or the launch of new programs. During the previous call, we discussed adjusting our 2022 capital spending to approximately $20 million, which includes capital needed to finish the capacity expansion of our direct long fiber thermoplastic expansion, or D-LFT, at the Mexico plant. Every piece of equipment for the new press has now been installed, and we expect that new press to reach full operational capacity in Q3. As we mentioned last quarter, bringing in additional presses along with automation lets us get the most out of our existing footprint and add the capacity we need, which generates revenue right away and helps push throughput and efficiencies higher while lowering how much we depend on labor. As of June 30, 2022, the company's available liquidity stood at $18.4 million, mostly through our revolving credit facility. Term debt for the company was $23.2 million at the close of June, and at quarter end our term debt to trailing 12-month EBITDA ratio came in below 1x adjusted EBITDA. The company's working capital is still solid; and we finished the quarter — finished the June quarter with accounts receivable of $54 million and days sales outstanding, or DSO, of 49 days. Our return on capital employed, a pretax return metric, for the first half of the year came in at 15.2% on an annualized basis. We remain convinced that our strong balance sheet, paired with efficient liquidity, gives the company the flexibility to keep growing. After the quarter closed, on July 22, we refinanced the debt facility and signed a new credit agreement totaling $75 million, divided equally among a revolving loan, a term loan and a CapEx loan. At the same time as that credit agreement closed, we took out an interest rate swap agreement running through 2027 on the $25 million term loan, at a fixed rate of 4.75%; the proceeds from the new term loan went toward repaying our existing term debt that carried a higher rate. We did complete the business transformation we began a few years ago, but that kind of work never really ends; we keep finding ways to make operations more efficient on the production floor at all our plants, and bringing in additional presses at our existing facilities lets us stretch throughput and generate incremental revenue. We remain dedicated to our core strategic growth prospects and profitability goals for this year, and we look forward to creating more shareholder value through sales growth, improved performance and clear, consistent messaging with investors and analysts. With that, I'd like to — I would like to hand it back to Dave for some final comments. Dave?

Dave Duvall

executive
#4

Thanks, John. We're pleased to share that quarterly sales hit a record, and demand remains robust for truck and power sports, with rising need in industrials, utilities, and packaging. Our attention is on enhancing margins, boosting efficiencies, and capitalizing on the additional presses and automation we've brought in. While product mix shifts from one quarter to the next are beyond our control, what we can manage is productivity and operational efficiency across each of our 6 plants. Given a healthy demand backdrop in core and sales that set records, we have to push productivity gains without letup, concentrate on removing every bit of waste, and lift throughput; this takes hard effort, and our team and processes are up to the task. When it comes to sustainability at Core Molding, our aim over the long haul is to make a positive difference in the world through smarter alternative materials that lessen environmental impact. Along those lines, we are deliberately working to turn waste into usable products and to implement recycled materials in place of prime materials. As I noted last quarter, we take seriously our duty regarding environmental sustainability, which centers on using energy and raw materials efficiently and minimizing waste. Our materials development team keeps researching alternative materials that lower environmental impact. Our sustainability work reaches into our customers' operations through the design of engineered materials and processes that transform existing materials and deliver solutions for our customers that also help our communities. Take, for instance, our packaging category, where we've collaborated on the design and now produce distinctive containers for our customer to raise and harvest millions of crickets. And this happens in a fully automated facility to provide protein-rich food for nations that are underserved or as a foundation for animal food. This kind of innovative sustainability solution is one illustration of how Core is making a difference in the world. The applications really have no limits; we stay sharply focused on carrying out our short- and long-term plans; and we are positioned well to grow and produce profits and cash flows; we are succeeding in new industries, putting resources into our people, engineering capabilities, automation, and assets. We drive improvements in our business relentlessly each day. Our spending on innovation and product conversion yields lighter weight, lower cost, and higher performance products for our customers. By employing our heat map hotspot process, we uncover new applications and grow wallet share, particularly in the industrial and utility sectors. We address challenges for businesses and people who want to, as we put it, work where they want to live, which fuels more infrastructure demand. We team up with businesses tackling new and evolving infrastructure challenges, like underground high-speed data lines that sped up during the pandemic and still do today. We think that relentless execution of our strategy will be rewarded by bringing greater stability and profitability to our company. We keep seeing a bright future for Core Molding Technologies; and I'm thrilled to keep growing the business and delivering value for our shareholders and for all stakeholders. Having said that, I'd now like to turn things over for questions from analysts or investors. Operator?

Chip Moore

analyst
#5

I'd like to start with the topic of output and efficiency gains. You brought that up. From what I hear, it's tied more to what customers are asking for regarding the supply chain and a few of those matters. Could you perhaps go deeper on that, tell us what you're observing, and explain what steps you can take to reduce some of those strains?

Dave Duvall

executive
#6

Sure. Regarding the mix of products — and truly the mix of products along with inefficiencies in operations — this clearly took a toll on our gross margin, roughly 340 basis points. We're genuinely seeing an acceleration in the truck build schedule. With roof-related items, roofs involve far greater complexity than certain other items, and that leads to many mold swaps and, I suppose, broadly speaking, stems from the mix of products. As a result, we've brought in numerous Kanban systems and, really, <<inaudible>> systems, plus rapid switching of molds and dyes, in order to offset the product mix dimension. Naturally, we also needed to bring in additional labor at particular facilities so we could keep up with rising demand. So we are indeed seeing a substantial rise in truck.

Chip Moore

analyst
#7

Understood. All right, that's quite useful. And when we consider that, a number of those initiatives, when we consider Volvo clearly adding in beginning in Q3 on that fresh extension with price pass-through, if you take that plus merely a few of the ramping programs, is there a manner to consider any read-through for margins in the back half? I would presume sequentially bettering, but just wondering how we ought to consider that.

John Zimmer

executive
#8

Yes. Clearly, the Volvo contract beginning July 1 will assist us moving forward with — on margins; we truly haven't had the ability to recover previously in one of those areas or with those folks. We've been collaborating with them to negotiate a fresh deal and working actively with them. And we value them sort of working with us on that. So we would anticipate having some margin improvement because of that. Simultaneously, I think, as Dave mentioned, we're going to work through a number of the operational challenges simultaneously, get to the Kanban processes put in place, the change in the molds put in place and then work through the new labor as the volumes come in at certain plants. We have to bring in labor, and we'll work through the training and the retention of the people; and so I think with the operational improvements we make and the Volvo, we would hope that, that would drive margins back up going into the back half of the year.

Chip Moore

analyst
#9

Understood. Alright, that helps. Perhaps one additional item from my side. I suppose it's the broader view, correct? You're kind of pushing up against real capacity limits, clearly putting money into added capacity. How do you frame — you mentioned this a handful of times during the call — how do you frame possible growth down the road and kind of weighing whatever downturn danger might come later? Or on the flip side, do you kind of enjoy the freedom to be choosier about certain business you pursue — does that strike you as more crucial, centered on getting the most from what you've got, versus at what point would you consider kind of venturing out further toward growth?

Dave Duvall

executive
#10

Yes. I believe at this moment, it's genuinely about getting the capacity installed in regions where we've got sites and the buildings already there at those plants to truly get the most out of those plants. And by doing so, we've got certain regions that are likely pushing against the capacity ceiling, which explains why we removed a few of the opportunities from our pipeline and also truly streamlined the pipeline around where we create the greatest value; so it's far more — being far choosier at this moment. We still have a few sites remaining at certain of our plants to keep growing further; and doing so would call for either bringing on a new facility or an acquisition in a comparable industry.

Chip Moore

analyst
#11

All right, understood.

Dave Duvall

executive
#12

There remain certain possibilities at the facilities we operate today, once we begin discussing the automation being deployed. Truly, that automation lowers — it brings down your workforce needs; it likewise cuts your vulnerability to the labor market; yet even more significantly, the benefit it delivers is a quicker cycle time for your equipment, since you aren't sitting around while workers enter and exit a machine to take out or put in the component. That means you're able to operate the machines at higher speed with that automated loading and unloading.

Chip Moore

analyst
#13

Yes. That's great. Alright, so let's address a few of those easier wins, and should demand rise along with our share of the wallet, we can consider further growth as things come together. Okay.

Analyst

analyst
#14

Alright, here's a related question; when we consider your overall portfolio of business, how much of it would you say must be, I suppose, reworked or repriced just to offset inflationary costs? Have most of those agreements already been handled? Or should we expect more? And what do you anticipate for the back half of this year?

John Zimmer

executive
#15

Yes, that's correct, we've actually completed every one of the contracts, every major agreement by now. It happened in 2 phases. Phase one involved adding a clause tied to raw materials into certain agreements; following that, it's a matter of going quarter by quarter and essentially pushing those expenses through each quarter. So we established procedures for the bulk of those fresh agreements we signed — the ones we've reworked so far; a few remaining agreements haven't reached their due date yet, though we've still managed to secure raw material recoveries from them; thus those agreements don't explicitly call for it, but right now both customers are giving us raw material recoveries.

Analyst

analyst
#16

All right. Great. And I believe you touched on this somewhat at the start of the call, but the $16 million in new business wins year-to-date — could you remind us what sorts of new business that comes from, perhaps from a verticals standpoint? And then that's somewhat lower than last year, I suppose, the pace of new wins; but how are we thinking about perhaps the next 12 months regarding what's in the pipeline for additional new wins?

Dave Duvall

executive
#17

Yes. So I'll just sort of walk through as far as the current wins. Roughly half of it sits in what we'd term utilities. The other fifty percent gets split among what we call last-mile delivery vehicles — not the big rigs, but things like Amazon and FedEx trucks. From what remains, some goes to smaller programs involving ConAg and power sports. Regarding future net new wins, our EVP of Sales and Marketing had set certain targets, I recall; however, once we started looking at capacity and launch capability — last year we launched $75 million in wins, and this year we picked up another $16 million — we're bringing on a total of 4 new presses, including the D-LFT press in Matamoros that John mentioned, a 5,500-ton machine. We're also putting in one more DLT press over in Winona, plus two additional presses at our Cobourg site. Bringing those machines online and getting the automation running is going to demand a significant amount of resources and time across roughly the next six months. So when it comes to bringing on more capacity, we're being far more choosy about what we take on, while we focus on the contracts we already have and getting automation installed. I wouldn't anticipate hitting $75 million again in this year. I'm not sure we'd even have the capacity both to launch that volume and to actually make it.

Analyst

analyst
#18

Okay, so then how do we view those start-up expenses as you kick off $75 million worth of newly won business going forward?

John Zimmer

executive
#19

Yeah, obviously during that initial quarter when you onboard somebody, you go through the ramp-up period — you're getting familiar with the equipment, building up your production rate, that sort of thing. So yes, on a quarterly basis, we'll incur some expenses, extra costs tied to whatever ramp-up we're doing for the new products. That said, by and large we've reached the stage where we genuinely understand how to handle this, though it likely still creates somewhat of an effect whenever we bring something up each quarter. Over the long run, clearly, it's positive to launch a new program, then get it running at full speed and lift the margins to the program targets we originally bid.

Jeff Geygan

analyst
#20

Thanks for the background and specifics you gave us in those ready remarks. Dave, regarding what you said about limitless market potential, when you're trying to zero in on a smaller, workable set of targets, which factors matter most to you as you look — at pursuing new business?

Dave Duvall

executive
#21

Sure. For our team, the thing that draws us in the most is being able to step in and deliver a solution that differs substantially from whatever they've got right now. To put it another way, this really shows up when we're working with, let's say, industrial clients or utilities. They could be relying on concrete troughs, concrete drains, storm water drains, that sort of thing — and you can walk in and provide an item with superior performance, perhaps because it has greater surface area, or because installation is simpler, and then turn it into a configurable offering so they can meet their full requirement for it. We observe this with — when we bring up troughs, it means creating the various interlocking segments of the trough, plus having the capability to manufacture to a specified order. So when they lay out a whole project, we're able to take it, configure it, and transform it into something resembling a Lego piece, so that we can produce every component needed and send it out to the site, where it simply gets put in. So essentially, that's where our method and our material give us an edge over whatever they're using at present.

Jeff Geygan

analyst
#22

Financially speaking, what kind of overlay do you have in place when you're weighing these various opportunities?

Dave Duvall

executive
#23

What kind of?

Jeff Geygan

analyst
#24

Sure, yes, perhaps this one is directed at John. When you consider an engineered answer coming out of this big universe, which financial yardsticks would you use to judge a good or even better kind of customer?

John Zimmer

executive
#25

Right. So Jeff, something we examine across every part of our business is, in a sense, the margin, plus we examine the return on capital employed in both cases. Thus, whenever we assess a new program, if value is being added, we truly do — in a sense, we establish targets for the margins we're after from that value addition. After that, what we also examine is whether it will require normal capital, and by normal capital I mean the items we employ daily in the business, there's a hurdle rate we apply. And should there be, in a sense, a special asset we'd need to purchase for some kind of product, our hurdle rate might differ. Our hurdle rate would differ. Simply recognizing that essentially all your income comes from perhaps that particular asset tied to that particular target opportunity. Even so, we do always examine the return on capital employed as well, and in a sense we've made it known that our aim is to earn no less than a 16% return on capital employed over the long term. And once more, that figure is pretax. Then, once more, we establish the earnings target so as to reach that, which will subsequently generate the free cash flows required for us to keep growing the business.

Jeff Geygan

analyst
#26

Yes. Great. Appreciate that additional color; and Dave, back to you strategically with the finite amount of capacity in the 6 facilities that you have, under what circumstance would you opt to add a seventh as opposed to rationalize further to improve profitability among your 6 facilities?

Dave Duvall

executive
#27

Yes. I mean, at this moment, I would definitely tell you that we are focused on streamlining the incoming business as well as getting the most out of what exists at our present sites. That is going to require a bit of time. There are certain launches we need to complete and get the right people in position to ensure those succeed, like John mentioned. What we would examine, I believe we are likely discussing 6 months, 9 months to accomplish that. And within our existing facilities, we still have 1 or 2 locations available to add. But I believe the bigger focus is automation and optimization, and then over the longer term, what we consider is whether a new facility would be added. However, that business would need to be firmly in hand before we would simply build a facility and assume that if we build it, they will come, since we know that approach fails.

John Zimmer

executive
#28

And Jeff, I think at this point, we recognize we're in a somewhat uncertain economic moment. So throughout this year, last year, we added $75 million in new wins. This year, we've focused more on rationalizing the business. I think that's driven more by let's see where the economy heads; and then as the economy does what it does, I think it will emerge on the other side of ventures like it always does and also begin growing again. And we'd probably consider, hey, is now the moment you consider putting money into new buildings and new facilities where you've got a solid long-term growth path on the economy ahead of you. At present, we're just a little uncertain. If we could pinpoint exactly where we think this thing is headed, we'd probably go one way or the other. But we're just going to be somewhat cautious at the moment and see where this economy heads over probably the next 12 months and then maybe sort of view things a bit differently as we get past what's happening over the next 12 months.

Jeff Geygan

analyst
#29

We definitely get why there's so much uncertainty right now. John, one final item from me. This is honestly just an administrative matter. Compared with a year ago, your income tax expense is clearly larger. Was there an explanation given — or could you walk us through what's behind that?

John Zimmer

executive
#30

Sure. At this moment, while we were — during the process of renegotiating those contracts of ours and attempting to secure the full raw material recovery based on which nation we're operating in and the places we were obtaining those raw material recoveries from, we — throughout the past 12 months, losses have been produced by us inside the United States. It does appear in footnote 10 or 11 within the income tax section, but — so losses are being generated by us in the United States. Then there's another factor: a significant portion of our SG&A sits in the United States, since the corporate offices are located here. We've got an active program under which costs get allocated by us to the Mexican and Canadian entities, though there's a ceiling on how much you're able to do. What has resulted, then, is that the income in Mexico and Canada gets taxed and shows up on my P&L. Because of accounting rules, the losses in the United States cannot be recognized on the P&L at this time. A full valuation allowance has to be recorded by us. So essentially, the tax on the 2 profitable ones is what you've got, rather than the benefit from the one that's unprofitable. Over the long term, that's being addressed by us through examining how some of our business structure is set up and possibly going beyond mere cost allocations to consider royalty arrangements, or considering where a great deal of the value from what we do in Canada and Mexico is actually being driven out of the United States, and that we might restructure somewhat and bring a bit more income into the United States, and perhaps examine that. An NOL exists on the books at present, that unrecognized NOL being roughly $4 million. So from my perspective, that's cash sitting out there that we could go obtain if this problem can be figured out and it can be used; and so it does carry a short-term, hopefully short-term, effect on the P&L. But over the long term, our hope is to return to a place where the United States is profitable, and you'd get something more like a standard, probably 25% tax rate blended or thereabouts.

Jeff Geygan

analyst
#31

Right. To wrap up, let me just say congratulations to the two of you. In my view, what you've delivered has stood out, and it's another solid quarter. Best of luck.

Justyn Putnam

analyst
#32

One small point I'd like clarified; the press release stated that the pressure on your gross margin percentage came mainly from mix shift, production efficiencies and inflation. I believe someone earlier on the call raised this, and you cited an impact of 340 basis points, spread across those three items. Is that right?

John Zimmer

executive
#33

Correct. I'd say Dave was basically referring to all three of those items we have. As we look at it — the 10-Q coming out today, I think, will give you somewhat greater clarity regarding the precise figures you'll see for those three components, and I'm actually just bringing it up now. Prior to adjusting for the raw material recoveries, what you'll wind up with is roughly, yes, 340 basis points from selling price and raw material costs, unfavorable net change in selling — or inefficiencies, pardon me. And the selling cost then is 160 basis points, the selling cost of raw materials. And then we did capture a bit of benefit from leverage, around 110 basis points, on fixed cost leverage. So yes, that 340 spans all three categories.

Justyn Putnam

analyst
#34

And that...

John Zimmer

executive
#35

I'm sorry. Go ahead.

Justyn Putnam

analyst
#36

And that's looking at it quarter versus quarter, correct? The second quarter of '21.

John Zimmer

executive
#37

Yes, measured against the prior year — that's right, against the second quarter of last year.

Justyn Putnam

analyst
#38

So can we put a figure on how significant you believe this is — it sounds like you're suggesting this is somewhat out of the ordinary or a drag. Is that the right way to read that figure as well? Does it strike you as a negative for that quarter?

John Zimmer

executive
#39

Yes. I'd say it's a negative for the quarter as well. What I mean is, when we look at the ramp-up taking place at this moment, with the category of product we're ramping being heavily truck, it simply requires far more labor when you ramp that up. You incur far more training expenses, that sort of thing. It's arriving, and so I would even — whether you examine it sequentially or you examine it year-over-year, I believe you're going to witness a bit of that same phenomenon occurring, where we're dealing with some of the inefficiencies of the kinds of products we're building and the pace at which we must build them, together with a bit of the continuing disruptions from the customer supply chain. This is among those matters I can't stress strongly enough. What I mean is, we still have customers phoning us on a Friday telling us, hey, we can't run next week. And we're scrambling like crazy to pull people out and sort of reshuffle the schedules, reshuffle the fiberglass we're actually going to make and where we're going to ship that, and inform the customers, saying, we can make your product. So we're still experiencing plenty of that disruption, and we experienced plenty of it in the second quarter. And that's exactly where we're simply attempting to collaborate with our customers to get somewhat more stable than what we perhaps ran in the first quarter or once more last year during the same time period.

Dave Duvall

executive
#40

You're also going to notice the mix of products shifting pretty noticeably as trucks scale up. According to Truck, their order book is full for the coming 18 months.

Justyn Putnam

analyst
#41

Okay, okay. Sure. During the last several quarters — especially as 2021 came to a close — you had singled out a specific factor that was weighing on results. I believe the phrase you used was something like unrecouped raw material price increases. Has that mostly run its course at this point, and is it no longer a major factor compared with those other things you just brought up?

John Zimmer

executive
#42

Yeah. During Q4, we were actually quite a ways behind in reaching a large number of the customers. Many of the customers back then had no awareness at all of what the price increase was. We were fighting them over price increases. We've now reached the stage where recoveries have come in from every one of our customers. As of July, we wrapped up that last contract with Volvo. So this has turned into a far smaller problem. What's likely a larger problem for us at present — and this is the thing we've been calling out, which ought to settle into a normal pattern going forward — is that with the raw material recoveries, we aren't actually earning any profit on them, so we simply pass that cost along; and that genuinely creates a slight dilutive effect on our gross margin percent — not on gross margin dollars, since what we're doing is essentially selling materials at cost whenever we must lift cost due to raw material or lift price due to raw materials.

Dave Duvall

executive
#43

No. I appreciate the ongoing attention you’ve shown toward our business. We’re eager to share a status report on how things are going once we release third quarter results in a few months. Thanks so much.

Operator

operator
#44

That brings us to the end of this call. We appreciate you joining us for today's presentation. You're welcome to disconnect at this time.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Core Molding Technologies, Inc. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.

Get the API View API docs →

This call discussed

For developers and AI pipelines

Programmatic access to Core Molding Technologies, Inc. earnings transcripts and 132,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Core Molding Technologies, Inc. or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.