Core Molding Technologies, Inc. (CMT) Earnings Call Transcript & Summary

November 8, 2022

NYSE American US Materials Chemicals earnings 43 min

Earnings Call Speaker Segments

Steven Hooser

executive
#1

Thanks so much, and welcome, everybody. We’re glad you could be with us on this Core Molding Technologies call, where we’ll go over how we did in the third quarter of 2022. On the line today, we have Core Molding’s President and CEO, Dave Duvall, along with the company’s Executive Vice President and Chief Financial Officer, John Zimmer. Before we get going, I want to point out that there’s a webcast of this call, and you can listen in through the audio link located on the Events and Presentations page within the Investor Relations area of coremt.com. A recording will be made of today’s call, the Q&A portion included. Keep in mind that any information that is time-sensitive might not still be accurate whenever someone replays it or reads a transcript. I also want to note that anything said in today’s discussion that isn’t a historical fact — such as statements or expectations about future events or future financial performance — counts as forward-looking statements, and they’re provided under the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. By their very nature, forward-looking statements carry uncertainty and are beyond the company’s control. Results that actually occur could differ materially from what’s expressed or implied. For our disclosures regarding forward-looking statements, please look at the earnings press release that came out today. Those factors, along with other risks and uncertainties, are laid out in detail in the company’s filings with the Securities and Exchange Commission. Core Molding Technologies is under no obligation to publicly update or revise any forward-looking statements. Management will discuss non-GAAP measures, which include adjusted EBITDA, free cash flow, return on capital employed, and adjusted net income and earnings per share. You can find reconciliations to the closest GAAP measures at the end of our earnings release. Last thing: the earnings press release we put out earlier today is available on the Investor Relations section of our website at coremt.com. That release has also been included in an 8-K filed with the SEC; and now I’d like to hand things over to Dave Duvall. Dave?

Dave Duvall

executive
#2

Thanks, Steven, and good morning to all of you. I'd like to begin by recapping some positive developments from the recent past. Several weeks back, we signed a fresh contract with United Forest Products that keeps our partnership going for an additional 5 years. We provide decorative lattice items that UFP delivers to commercial and residential clients across the leading big box home improvement chains in the U.S. Thanks to this long-term arrangement and similar ones, we anticipate remaining a valued partner for building products, industrial, utilities, packaging, transport, powersports, and critical infrastructure companies across North America. Even though we stay cautious about what lies ahead, as most businesses do in this climate, demand is still solid, and in some end markets it's strong. Luckily, we're a key and trusted supplier to numerous growing companies and industries. And as companies prepare for their 2023 output, they're securing deals with us; we've put in substantial effort to craft supply agreements that benefit both sides with our partners, and our new contracts permit price increases when input costs rise. We continue to be an essential manufacturer in vital end markets, and as macroeconomic headwinds strike, U.S. businesses seek certainty and confidence in their supply chain, particularly following the recent supply chain disruptions and sea freight difficulties we've faced. Now to our results for the first 9 months of the year: net new wins this year climbed to 24 million, and our opportunity pipeline stays strong at 110 million. As a reminder, our aggregate pipeline covers all active new business opportunities. This year, we're happy with the wins we're securing, which I think further show our capacity to pick and manage projects that make the best use of our assets and our capacity to achieve higher margins. Third quarter results were solid, but product mix was the main factor affecting margins <<inaudible>> in the quarter; we're glad to report record high sales this quarter, with net sales up more than 25% to almost $102 million. Despite the robust revenue performance, normal seasonality revenue diversification shifted back toward medium or heavy duty truck, which went from 39% in the second quarter to 49% in the third quarter of this year. John will go into this further shortly, but at a high level, that's the main reason our sequential gross profit margin was basically flat between Q2 and Q3 of this year. I'd also like to highlight some significant progress and product launches in the third quarter. Product launches and product sales represent net new wins announced in 2021 and 2022 that are in production and currently being rolled out; we reported strong third quarter gains in product sales, up 36.5%. A few instances of product launches include the last mile truck project, which is now fully in production; plus, we rolled out several new powersport projects. And last, when it comes to industrial and utilities, we've got one significant launch that has reached full production at this point, plus quite a few projects tied to stormwater solutions, flush cover <<inaudible>> products, and additional industrial utility work, all of which should be in production by the first quarter of 2023. Every one of these customer launches has us excited, since they sit within large end markets where our technical solution team has helped us deliver engineering solutions. These projects matter because they fit with our strategy of ongoing diversification and delivering an engineered solution, which is exactly what fuels our margin enhancement initiatives; so with that, I'd like to hand things over to John, who will go through the financials in greater detail.

John Zimmer

executive
#3

Appreciate that, Dave, and welcome everyone joining us. Net sales for Q3 2022 totaled $101.6 million, up 25.4% from the comparable quarter a year ago, and product sales climbed 36.5% versus the same period last year. Most of the top-line improvement was driven by higher customer demand in our transportation and powersports segments, the rollout of new programs, and raw material recoveries. Third-quarter gross profit was $13.3 million, equal to 13.1% of sales, compared with $6.4 million, or 7.9% of sales, a year earlier. As you recall, during the fall of 2021 the U.S. experienced a period of swift inflation, and that pressure was visible in our margins. Last year, we acted fast and started collaborating with our clients to offset higher costs for raw materials. As anticipated, pushing through those raw material cost hikes proved difficult, requiring extensive and continuing talks. Even so, our work paid off in the form of a better gross margin. When you combine the effects of adjusted selling prices with the persistent rise in raw material costs, reported gross margin climbed by 790 basis points during the third quarter of 2022 versus the equivalent quarter in 2021. During that third quarter, gross margin was chiefly influenced by shifts in product mix, along with inefficiencies in production. Dave mentioned earlier that gross margin from Q2 to Q3 of 2022 stayed essentially level on a sequential basis, and the main reason was the mix of products. During 2022's third quarter, medium and heavy duty trucks accounted for roughly 49% of product sales, whereas in the second quarter that figure stood at about 39%. This change in the revenue mix came from typical seasonal patterns combined with a strong surge in demand from our truck customers. In the third quarter, inflation on raw materials moderated somewhat, and we observed certain declines in <<inaudible>> prices. Looking ahead, we'll keep collaborating with customers to pass along any shifts in raw material costs. Dave already touched on this, but we're keeping a close eye out for any shifts in what customers are asking for. Should recession-related pressures pick up, that kind of change might show up in Q4 of 2022 or the first part of 2023 — so far, though, we haven't noticed anything significant. On the SG&A side, the quarter came in at $8.7 million, versus $8.8 million during the same stretch a year earlier. That earlier figure carried $1.8 million tied to winding down operations at our Cincinnati facility. Once you strip out those prior-year shutdown expenses, SG&A measured as a share of net sales was basically level with where it stood in 2021. Operating income for Q3 came to $4.6 million. During the third quarter, our net income totaled $1.3 million, equal to $0.16 per share. That figure absorbed a $1.6 million charge—roughly $0.19 per share—tied to extinguishing debt, a one-time item stemming from the refinancing we finished in July. This charge came from writing off about $1.2 million in prior debt issuance costs on a non-cash basis, plus an early payoff penalty near $350,000, incurred to retire roughly $12 million in fixed-rate debt carrying an 8.25% interest rate. In last year's third quarter, 2021, our net loss stood at $3.3 million, or $0.41 per share. Adjusted EBITDA for the third quarter of 2022 reached $8.4 million, which equals 8.3% of sales. At the back of our press release, you'll find tables reconciling GAAP to non-GAAP, and those cover the third quarter along with the year-to-date numbers we're going over today. Switching now to the opening nine months of 2022: net sales came in at $290.9 million, which is up 24% over the same period last year, and product sales climbed 28% versus the prior-year period. Those top-line improvements were driven largely by robust demand from customers and sales from new programs — evidence that our efforts to diversify revenue strategically are paying off — plus recoveries on raw materials. On gross profit, we posted $40.9 million for the first nine months, equal to 14.1% of sales, compared with $32.9 million, or 14% of sales, during the first nine months of fiscal 2021. Favorable net selling prices gave gross margins a boost that outweighed rising raw material costs, though that gain was partly canceled out by an unfavorable product mix and production inefficiencies. At two of our facilities, we've encountered operational inefficiencies along with startup costs tied to program launches, and we're focused on bringing those down. For the first nine months, SG&A came in at $25.9 million, versus $23.7 million — or $21.7 million once you back out plant closure costs from the same period a year earlier. Operating income for the year to date reached $15 million, and beneath that line we booked a $1.6 million write-off of debt issuance cost. For the first nine months, net income came to $7.4 million, which works out to $0.87 per share, versus $4.2 million, or $0.50 per share, a year earlier. Adjusted EBITDA year to date reached $25.9 million, a margin of 8.9%, up from $18.7 million in the prior year. Let's move on now to the company's financial position, cash flow and balance sheet. Operating activities generated $8.5 million in cash during the first nine months ended September 30, 2022, while capital expenditures came in at $12.3 million over that same period. The rise in working capital — accounts receivable in particular — ties back to higher sales this year. So far this year, roughly $7.5 million in capital expenditures went toward boosting capacity and getting new programs off the ground. For 2022, we now expect capital spending to come in at about $18 million. Two of our new presses, along with robotics, have come online and are running. By bringing in presses and automation this year, we're able to get the most out of the space we already have, boost capacity, and push throughput and efficiency higher — which has gradually lifted our revenue while cutting how much we depend on labor. As of September 30, 2022, the company's available liquidity stood at $46.5 million, made up mainly of 20.9 million under our revolving credit facility plus $25 million available under our cap line of credit. As of the close of September, we carried term debt totaling $24.5 million, and at quarter-end our ratio of term debt to trailing 12-months EBITDA came in under 1x adjusted EBITDA. Working capital remains in a strong position, and when the September quarter wrapped up, accounts receivable totaled $54 million, while days sales outstanding, or DSO, was 48 days. Return on capital employed, a pre-tax return metric, registered 14.6% on an annualized basis. We still believe that having a strong balance sheet along with plenty of liquidity provides the company with the ability to continue growing. If you recall, back in July we wrapped up a successful refinancing of our debt facility, putting in place a new credit agreement totaling $75 million that covers our revolving loan, term loan, and CapEx loan commitment. Through a swap agreement, we additionally shifted the daily floating SOFR to a fixed rate of 2.95% on the term loan. With the credit agreement margin at 180 basis points, the rate on our term loan debt reached 4.75% as of September 30, 2022. In addition to entering into the new credit agreement, we have fully repaid all amounts outstanding under our prior credit facility, whose interest rates were higher than those under the new facility; these actions enhance our liquidity, reinforce our balance sheet, and lower both our weighted average cost of debt and our debt service expense. Although our strategic business transformation continues, we see fluctuations from quarter to quarter driven by shifts in product mix that impact our revenue diversification goals, as well as production efficiencies that impact gross margin; we will remain intensely focused on all factors within our control regarding input costs and productivity, and our technical sales teams continue to make headway in developing engineered solutions and conversions that improve grow margins. We can quickly increase output and revenue by putting additional presses into service at specific locations, which improves how efficiently things run on the manufacturing floor. Out of the six plants we operate, a single one is receiving the most attention for enhancement, and there are two explanations for that. The first is that, when you look at the product mix, this location deals with a greater amount of heavy duty truck volume. The second is that infrastructure at the site, which we have the ability to upgrade, makes the plan less efficient, and that work is underway. Our commitment remains strong to the central goals of strategic expansion and profitability, and we have initiatives in place intended to generate value over the long term during 2022 and afterward. Even though we're seeing encouraging signs with how strong customer demand is right now, we're keeping a close eye on volumes and forecasts. We're also staying cautious when it comes to cash and how we allocate capital—whether that's for capex, acquisitions, staffing, or any other costs and expenses. With that said, I'd like to hand things back to Dave for a few closing remarks. Dave?

Dave Duvall

executive
#4

Thank you, John. We keep witnessing robust order volumes for trucks and power sports, alongside rising need for industrial, utility, packaging, and infrastructure offerings. When considering our capacity, every piece of work isn't equivalent. Our approach is concentrated and principled, dedicated to using our assets with clear purpose. Just as every company today, our attention is on profit and how well assets are used, while monitoring for indications that order projections may shift; during this quarter, we'll keep broadening revenue across end markets to lower the danger of over-reliance on one client or sector. This lessens the chance that a single industry could heavily impact our operations and assists us in steadying gross margin results whenever the market shifts. Our staff keeps assessing internal elements to boost efficiency in manufacturing operations, ensuring we uphold a culture and rigor of ongoing enhancement throughout the company; we're putting more resources into automation and how quickly we handle materials. We're likewise achieving consistent advancement with sustainability initiatives. Our inaugural sustainability report will come out in the first quarter of 2023, showcasing several areas where we're making strides. Each day, we make personal choices impacting nature, the climate, and various creatures. If we choose daily actions that contribute to a brighter tomorrow, we think these small steps will generate a strong momentum effect for our households and neighborhoods. During the prior quarter, I mentioned that within our packaging segment, we collaborated on designing and producing containers for a client to raise millions of crickets, which can act as protein-dense nourishment for nations lacking resources or as a foundation for livestock feed. I'm glad to announce that this fully automated cricket facility is now operating at capacity and we're fulfilling the client's increased volume requirements as of now. We're additionally concentrating on initiatives to save energy, leveraging government-supported energy and thermal assessments to outline efforts enhancing the power factor at our facilities, which will cut electricity usage at our bigger sites. I'd like to restate John's points regarding cash and how we allocate capital. While getting budgets ready and reviewing our three-year strategic roadmap, we're diligently assessing the optimal ways to deploy cash for building value over the long haul. And even though we're delighted with our unprecedented sales and hopeful about expansion possibilities in several of our newer end markets, we intend to stay prudent and systematic with how we distribute capital. This indicates we'll keep tracking cash, value generation, and our return metrics, particularly as the broader economic conditions evolve. Prior to taking questions, I wish to express gratitude to our whole core molding crew for their efforts and commitment during yet another demanding and triumphant year. To put it plainly, I take pride in being part of an outstanding team. I think you'd hear from the majority of companies that the past 2 years presented difficulties, given what we dealt with regarding COVID, fast-rising inflation, and, more lately, disruptions affecting the worldwide supply chain. Delivering solid outcomes has not been easy, and I'd like to praise our team for remaining concentrated and vigilant as they kept performing and pushed the company ahead. Naturally, we're lucky to have such strong collaborative groups that place excellence and careful effort at their core. John and I also wish to keep thanking the analysts and investors for standing behind us, and we invite your questions, whether during today's earnings call or on a follow-up call, so we can address everything you'd like to ask; having said that, I'd like to turn the line over for questions. Operator?

Chip Moore

analyst
#5

Morning, Dave. John, I appreciate you fielding this one.

Dave Duvall

executive
#6

Chip, how's it going?

John Zimmer

executive
#7

Morning.

Chip Moore

analyst
#8

Right, right. My question is about gross margins. You mentioned the mix shift along with certain production inefficiencies. Could you give us a clearer picture of how that affected things? And beyond seasonal patterns, it seems there might have been somewhat stronger demand on the trucking side. So please walk us through how that seasonality is supposed to behave, and also any effects from raw material cost recovery that factor into margins?

Dave Duvall

executive
#9

There's a typical seasonal pattern in which Q3 and Q4 arrive, when most of what we sell consists of products whose margins are lower. So it's essentially revenue from a blend of items, and you can observe that pattern in our past results too. Compared with the rest of the business, Q1 and Q2 will consistently deliver stronger margins. Looking specifically at Q3, I believe it comes to roughly 270 basis points for Q3. Product mix accounts for most of that, as reflected in the percentage of sales. Part of it stems from certain operational inefficiencies; we've got major launches happening at one of our facilities; and at the other facility, regarding the infrastructure John brought up, we're really examining big systems within that plant, such as the electrical, steam, and press systems.

John Zimmer

executive
#10

Right, Chip, let me take the raw materials question. What you're seeing with raw materials is that we've now reached a point, year over year, where comparisons — quarter-to-quarter comparability — are beginning to emerge. As I recall, in last year's third quarter we had only just begun to get some comps; substantial recovery is still underway. For the bulk of our business, recovery mechanisms exist, whether formal or informal, and we are indeed recovering. What's emerging at this stage, though, is that certain raw materials are experiencing declines in price, along with increases and decreases. Consequently, because raw material recovery is built in, some customers see their revenue go down when that occurs, while revenue goes up for other raw materials at the same time. Another thing we're observing, at least at present, is that raw materials are beginning to level off as of now. Early in the year we saw some fairly large increases, but at this point most of our raw materials have settled into something a bit more stable and, hopefully, may even begin to edge down somewhat. Things like some steel prices that we pay on hardware should hopefully reset early next year, given that steel prices shot up earlier this year and have now come back to earth. So we may start to see some of that; and therefore, regarding where our revenues will land and gross margins, the effect of raw material recoveries as a factor in the gross margin numbers is going to be smaller, I really believe, because at this point they're just stabilizing somewhat.

Dave Duvall

executive
#11

And I believe the difficulty there — as we discussed earlier — is that how quickly things ramped up and then came down proved genuinely hard to handle, particularly when it came to that upward swing.

Dave Duvall

executive
#12

Understood, that helps. Next, I'd like to ask about the additional net new business you brought in during the quarter. Could you describe approximately where it sits? Is it possible to expand into additional segments? And regarding CapEx, I believe there may be one more press arriving before this year ends; could you update us on its status, along with the automation, and tell us what to anticipate? When it comes to the net new wins, slightly more than half, we'd characterize as coming from industrial and utilities. The remaining portion would fall under heavy truck.

John Zimmer

executive
#13

Alright, so heavy truck and marine also contributes somewhat for the year. When you mention that $24 million for the year, roughly 4 million of that comes from transportation truck. That works out to what, 15%, and the remainder is a blend of last mile delivery, a bit of ConAg, some power sports, utilities, that sort of thing. So we keep seeing diversification, with net new wins involving somewhat less truck. And again, one thing we notice is that solid truck business is still out there. So we'll pick up some strong new truck business that makes sense — and we'll always pursue the opportunities that make sense there. It's simply that we're likely more focused on some of those other areas, since margins are somewhat better on them.

Chip Moore

analyst
#14

Understood. That's clear. Alright, perhaps just one additional question from my side. Taking the wider view, you touched on the macro environment and staying somewhat careful — reasonably careful — while keeping an eye on developments. At this stage in the year, where do you usually gain better insight from customers, and considering that you're running into capacity limits, at what point might you think about bringing on more capacity, or given a possible macro downturn, is that an area where you'd hold back in the near term? Thanks, everyone.

Dave Duvall

executive
#15

Yeah, looking ahead to next year, we clearly — like everybody else — are expecting some kind of revenue decrease at this moment. We aren't truly observing that yet. We still see ongoing growth and robust demand for the truck. We'd anticipate noticing it initially, and likely in personal watercraft, ATV — things tied more to discretionary spending. We'd expect that to begin showing up perhaps late in the year or early in the first quarter, but we'll remain cautious going forward when it comes to putting money into additional capacity. Given the four machines we brought in during this year, our capacity is sufficient at minimum until we expand, until additional growth appears as we head toward the close of next year.

Chip Moore

analyst
#16

Understood. Excellent. Okay. Many thanks.

Dave Duvall

executive
#17

Right. The major point, I believe, is that we've become far pickier about expansion — both regarding where we choose to expand and the areas in which we do so. Last year, net new wins totaled 75 million, and we may well reach 75 million in net new wins once more this year, yet the ability to bring that capacity online, get it running, and keep everything at an equivalent level of value means our attention leans more toward the worth of the fresh business.

Chip Moore

analyst
#18

Right. Regarding the risk profile, it seems you're feeling quite confident. OK, thank you.

Dave Duvall

executive
#19

Precisely.

Mike Hughes

analyst
#20

Sure, appreciate you fielding these. Regarding the inefficiencies tied to the program and what we spent on launching it, could you sharpen that up a bit and pin down how much gross margins took a hit during the quarter because of those items?

Dave Duvall

executive
#21

Sure. That's genuinely hard to do, since what occurs is, while you're launching, you get a certain amount of inefficiency that spreads across the entire plant. We've always attempted to capture it and acknowledge it — sure, you can tally a bit of scrap in there — yet it triggers a major launch disruption. Typically we generate inefficiencies across every kind of job, and suddenly the entire workforce is zeroed in on a bond, or on something failing to bond, correct? So you're not putting as much effort into your routine everyday work. That's why it can really throw the entire facility off. The upside is that these things can generally be resolved within roughly a 6-month window. Our view is that with a big launch, you have that 6-month window in which you're truly grinding through bonding problems, scrap problems, deciding where the charge pattern goes, and everything else, and eventually it gets sorted out and the plant returns to normal. So our expectation is that the effect of that launch would begin fading — probably around Q1 of next year — the effect on that other facility we've mentioned. Once again, we don't disclose the separate component. We do think the inefficiencies are there; I believe you'll find in the 10-Q that our inefficiencies and mix compared with a year ago added up to another 270 basis points. Our honest belief is that if we can get that plant sorted out and running properly — though I won't provide a figure — it will clearly appear in the margin. It won't be a trivial thing like a point, or 10 basis points. It's the sort of thing that will be visible in the margins as we continue working through it. And so, as we resolve that, we'd anticipate our margins beginning to climb back toward the mid-teens to high-teens once we get past it and bring other products to launch.

John Zimmer

executive
#22

Right. I believe a difficulty you run into, as you're aware, with any rollout is that the customer hits issues, they'll halt manufacturing, resume it again, and certain suppliers that perhaps the customer brought in might run into problems. So it's about resolving all of that; it isn't merely, let's say, a facility being up and running.

Mike Hughes

analyst
#23

Alright. So John, I just want to build on what you said. So, when this — it sounds like everything is being focused on this single facility. When that facility is operating at a better efficiency level, you'd be able to get back 200 basis points to 300 basis points of gross margin purely from that. Is that right?

John Zimmer

executive
#24

Yeah. So, what I'd say is, I believe we're sitting at 13 today. What we're aiming for is getting back to that 15% to 20%. With the one site where we achieve stabilization from the launch, and then the other site where we push through and resolve the problems we're dealing with there. Again, getting back into that 15% to 18% range would be our objective. And so, you've got mix that shows up each quarter and things of that nature, but that's the range we would certainly be striving to move back toward.

Mike Hughes

analyst
#25

All right. And regarding that launch, will it involve an existing Class 8 customer?

John Zimmer

executive
#26

That's right, a Class 8 customer, yes.

Dave Duvall

executive
#27

Okay, got it. And you saw a pretty impressive tooling figure this quarter. In certain ways, I suppose that might serve as an indicator looking ahead, unless you happen to be shifting business with a customer you already have; so, what portion of those tooling amounts was tied to fresh business? Yeah. So, over the course of the quarter, I recall we had a few sizable ones. One is in fact for a business that also launched within this same quarter. So, it was certainly brand new; therefore, a solid chunk of that was for the piece that launched in the quarter. And in fact, when I mention that both of them, the two largest ones were for all business that launched. One was that Class 8 truck we had been discussing, which is a new program. The other one was some things that are non-Class 8, yet it was also a new program; so, both of those do — the bulk of both was certainly for revenues down the road or new revenues.

Mike Hughes

analyst
#28

All right. Then looking at the year so far, we've got $24 million in net new business wins, and last year it came to 75 million. That puts us just under $100 million in net new business wins. How much of that has already launched?

John Zimmer

executive
#29

Well, during Q3, roughly 10 million of it landed in Q3 by itself.

Dave Duvall

executive
#30

Right, those are indeed the Q3 revenues stemming from the launches. So here's what takes place with these launches: as I work my way down the sheet in front of me, most of those programs have already gone live in one form or another, but the thing is, it takes several quarters before they reach full speed and really ramp up. Therefore, what we're able to say is that, based on our tracking, roughly $10 million in fresh revenues came in during Q3 alone, just for that quarter, from programs among the 75 within the 24 <<inaudible>>.

Mike Hughes

analyst
#31

All right, then. If I take that 10 million and put it on an annual basis, that comes to $40 million, which would leave another $59 million that still needs to launch — is that right? And how long would that take?

Dave Duvall

executive
#32

Well, these are going to be launch or ramp situations. As I mentioned, a portion of them have already launched, but they haven't ramped. So once more, our expectation would be that additional ramping would begin occurring across the periods in the coming year. Then again, these represented 75 million of net new wins in 2024, back when they were one <<inaudible>>. I'm going to stay careful about that figure, the same way I am regarding the remainder of my business. I have no idea what the Fed is up to and what their intent is in terms of slowing business down. But based on what they've stated, my belief is it will eventually affect every part of our business. So, I believe you would certainly see the ramp, and beyond that there are multiple programs — as I look right down my sheet here, four, five, six, seven of them — that still haven't launched at all. Those will therefore launch afterward in the current year; in fact, a number of them will launch at various points across the following year, just as we've had. The most recent one I have, I believe, actually has a launch in Q1 of 2025. That's the extent to which some of these programs can stretch out, simply because the major OEMs will hand out those programs that far in advance.

Mike Hughes

analyst
#33

All right. But I'm just wondering, if your core business were to drop 10% next year based on the current run rate, that comes to roughly $40 million. It's possible that the launch ramp could make up for that, correct?

Dave Duvall

executive
#34

Yes.

Mike Hughes

analyst
#35

Alright. And how do the margins shape up for those upcoming launches and ramps? Setting aside — you talked about that problem with one major program that's experiencing a bit of — some difficulties?

Dave Duvall

executive
#36

Yeah. What I'd say is, our objective is always to keep making our margins better going forward, whether through an engineered solution, within another industry, or by managing a conversion away from some traditional material. So without question, the key aim is to get deeper into the customer's design cycle, become more integrated, and deliver a solution of greater value.

Mike Hughes

analyst
#37

Alright, just a couple of quick follow-ups from me. During the summer you attended a conference, and I believe you brought up a single big customer that had not yet given you the price recovery. So at this stage, have you gotten that price recovery on raw materials from every one of your major customers?

Dave Duvall

executive
#38

Yes, we have.

Mike Hughes

analyst
#39

All right. Then for my final question, just regarding the raw materials <<inaudible>>. For polypropylene, October pricing appears to be roughly 20% below the third-quarter average, while polyethylene is approximately 6% under that same third-quarter average. When raw materials decline, isn't there somewhat of a delay where you'd gain, just as you were harmed when they rose?

Dave Duvall

executive
#40

Correct. Sadly, not all raw material adjustment costs are the same, and we'll work through that, since certain ones shift as quickly as monthly, others shift quarterly, and some shift every six months. So indeed, we'd anticipate somewhat of a delay; but I'll say, a few do shift as quickly as monthly, and we will adjust prices monthly; but on the whole, that's what we'd anticipate seeing — you receive something like an advantage when those prices do drop.

Mike Hughes

analyst
#41

All right, and I've got a single follow-up question about that. Regarding fiberglass, I'd come across information suggesting an additional price hike is coming in early next year — does that hit you, or is it already locked in for you at this stage?

Dave Duvall

executive
#42

Aside from an actual adjuster clause of some kind that shifts things every six months — and that one is influenced more by energy and a few raw materials that feed into it, though I can't recall precisely which — we're locked in on our major fiberglass. So really, most of it is locked, though you could likely observe swings of $0.03, $0.04, $0.05 per pound purely because of that adjuster clause. So that piece is locked. What I'll share is that we aren't entirely locked, and we're noticing there could be a few openings in glass on other fronts — it's possibly priced somewhat lower, and we might be in a position to capitalize on that with certain material originating from China. Because shipping rates have declined, those sorts of things have genuinely become somewhat more advantageous. That said, what I'll share is that most of our glass still originates from North America. Our view is simply that this is the superior supply chain at present, the steadier supply chain at present, yet we can secure a modest amount of advantage by purchasing a portion from China.

Mike Hughes

analyst
#43

All right, thanks a lot. I appreciate that.

JP Geygan

analyst
#44

Hey, good morning, everyone, and congrats on a solid quarter; we can see it plainly, but the work you're doing to reshape the company is paying off.

Dave Duvall

executive
#45

Thank you, JP.

John Zimmer

executive
#46

Thank you, JP.

JP Geygan

analyst
#47

I have a few additional strategy-related questions today. First, you've made it plain that new verticals are being brought into the company, and that ought to reduce part of the ups and downs that the Class 8 truck sector has shown us over time. As signs of an economic downturn begin to appear, what's the right way for us to consider demand from end customers in those verticals?

Dave Duvall

executive
#48

When we begin to examine infrastructure and utilities in particular, demand keeps rising, and there's considerable enthusiasm regarding the infrastructure build and the manner in which it is being allocated. Items such as fiber optics and communications have in fact been moved straight into the state's budget, so the state is then able to carry out what it requires, more or less kicking off projects. Regarding a few of the others, perhaps certain stormwater drains connected to buildings, we could observe, I suppose, some flattening there, yet at this moment, anything tied to fiber optics and communications, data transmission, and then general infrastructure is something we see growing.

JP Geygan

analyst
#49

Great. Alright. You brought up talks you've been having with clients regarding increases in raw material prices, and perhaps more broadly regarding working out terms and conditions that are fairer and more even. Could you give us additional detail on where those ideas stand now, and on what basis we ought to view the Ts and Cs <<inaudible>> in the fresh agreements you're rolling out, like the one with UFP?

John Zimmer

executive
#50

Yes. And once more, I'll repeat that line, customers aren't all made the same either; and so, we do work through the Ts and Cs on a customer-by-customer basis. We truly know our customers. There are simply varying degrees of partnership with customers, and so certain Ts and Cs are going to look different for different ones. What we're focused on is this: we're going to include a raw material adjuster clause, or some form of adjuster clause, in all contracts from here on out. Certain ones will be fairly simple talks, certain ones are going to remain fairly difficult talks, someone like UFP. Once more, when it comes to thermoplastics with an index, that's a fairly simple discussion and it got done quite fast. And so, I believe we'll keep seeing that mostly in thermoplastic segments; the thermostat folks are going to keep an RMA clause, though possibly with somewhat more bargaining. And so, when we reach every one of those talks, I think we've mentioned, we have a number of additional negotiations on the horizon where we're sourcing raw materials, yet we have new contracts on the way that we'll work through alongside the customer and then try to ensure we land somewhat more even-handed agreements on a few of those where perhaps in the past we managed to get them.

Dave Duvall

executive
#51

For certain customers, I'd say this involves both a shift in how they operate commercially and a shift in mindset. Their whole approach has rested on fixed rates, with the ability afterward to push higher prices through to the final buyer.

JP Geygan

analyst
#52

Alright, thank you for whatever extra detail you can provide. Last question: when you start rolling out more solution-focused or heavily engineered goods or offerings, what should we anticipate happening with the economics at the project level across a project's lifespan, and especially regarding the expenses or schedule tied to ramping a project up?

Dave Duvall

executive
#53

Yeah. What I'd say is that it certainly stretches out the schedule when you're involved at the design stage early on. It doesn't always stretch out, though, when we consider the quote, the cash, when we consider net new wins, since the moment they've made the decision to launch, at that point you're already looking at tooling — but being involved earlier in the design and development cycle definitely means we spend more time and more resources; we're carrying out far more validation against federal requirements for loading, as well as for the material and the product itself.

JP Geygan

analyst
#54

I'd guess—though perhaps you could verify—that getting involved that soon genuinely helps make such agreements somewhat more binding?

Dave Duvall

executive
#55

Without a doubt. What I mean is, when you're the sole party capable of delivering that answer, I believe a number of our programs make that point extremely, extremely evident. What I'm saying is, since we're the lone provider on the planet offering those two methods, we can apply both of them to arrive at an optimized answer.

JP Geygan

analyst
#56

Great. Thanks for taking my questions.

Dave Duvall

executive
#57

Thanks, JP.

John Zimmer

executive
#58

Appreciate that, JP.

Dave Duvall

executive
#59

We're grateful that you keep following what we're doing, and we're eager to share how things are going when we release our fourth quarter numbers a few months from now. Thanks.

Operator

operator
#60

That wraps up our call. We appreciate you joining us for today's presentation. You're free to hang up at this point.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Core Molding Technologies, Inc. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.

Get the API View API docs →

This call discussed

For developers and AI pipelines

Programmatic access to Core Molding Technologies, Inc. earnings transcripts and 132,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Core Molding Technologies, Inc. or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.