Core Molding Technologies, Inc. (CMT) Earnings Call Transcript & Summary

May 8, 2025

NYSE American US Materials Chemicals earnings 26 min

Earnings Call Speaker Segments

Sandy Martin

executive
#1

Thank you, and good morning to all of you. We're glad you could be with us on this Core Molding Technologies call, where we'll go over what we achieved in the first quarter of 2025. On the line with me today is the company's President and CEO, Dave Duvall, along with Alex Panda, who is stepping in as CFO and serves as Vice President, Corporate Controller, and EVP and CFO John Zimmer, who'll be available during Q&A. A webcast of this call is available, and you can reach it at CoreMT.com through an audio link located on the investor relations events and presentations page. This call, the Q&A portion included, is being recorded. Please keep in mind that time-sensitive information might no longer be accurate by the time anyone replays it or reads a transcript. I'd also like to note that anything discussed today that isn't historical fact — such as statements or expectations about future events or future financial performance — counts as forward-looking statements, made under the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. Forward-looking statements are, by their nature, uncertain and beyond the company's control. Actual results could differ materially from those expressed or implied. Our disclosures on forward-looking statements can be found in today's earnings press release. These factors, along with other risks and uncertainties, are described in detail in the company's filings with the Securities and Exchange Commission. Core Molding Technologies is under no obligation to publicly update or revise any forward-looking statements. Management will refer to non-GAAP measures, including adjusted EPS and adjusted EBITDA, debt to trailing 12-month EBITDA ratio, free cash flow, and return on capital employed. You can find reconciliations to the nearest GAAP measures at the end of our earnings release. The earnings release was submitted today to the SEC on Form 8-K. At this point, I'd like to hand the call over to the company's President and CEO, Dave Duvall.

David Duvall

executive
#2

Thanks, Sandy, and I appreciate everyone being here with us today. On May 1, we were privileged to ring the opening bell at the New York Stock Exchange. That's a major milestone for Core Molding Technologies, and it gave us a moment to reflect on the journey from a bank default just five years ago to where we stand now — a company holding more than $45 million in cash, with a strong execution culture and a sharp focus on growth. I'd like to thank the whole Core team for making this transformation happen, and while we're never finished, we take pride when we look back at what we've accomplished. Across the last five years, we've achieved meaningful gains in operations, profitability, and product lines, which came out of our must-win battles. Those efforts show up in our capacity to hold and even grow gross margins through a tough first quarter. Even with macroeconomic uncertainty weighing on global manufacturing, we stay closely aligned with our customers and supply chain partners. Our capacity to execute through difficult conditions puts us in a good position to seize opportunities in today's environment. In Q1 we carried out our strategy effectively, producing solid gross margin expansion, profitability, and positive free cash flow even with lower sales, which we had anticipated. Notably, we hit 99.3% on-time delivery and kept quality below 100 parts per million, both of which are industry-leading metrics. This year's must-win battle centers on investing for growth; during Q1, we landed more than $15 million in annual new business, comprising $10 million in the building products sector and $5 million in the electric vehicle battery sector. The building products sector win came from our emphasis on proprietary Sheet Molding Compound, or SMC, as we refer to it, which enables shorter quote-to-cash cycles than traditional engineered solutions; we anticipate this opportunity will produce roughly $5 million in revenue in 2025, with demand starting in Q2. Ongoing investment and operational enhancements in our SMC compounding capabilities have made that growth possible. The electric vehicle battery win is our second program with this customer and shows how our voice-to-customer efforts can drive expansion within existing customers; beyond that, we've invested in our Topcoat Paint capabilities at our Matamoros facility to serve customers in the mobile machinery sector. This investment strengthens our value proposition by letting us offer a fully integrated solution from proprietary SMC formulation to molding, assembly, and painting all under one roof. That makes us a complete solution provider for growing markets like construction, industrial applications, and heavy equipment. Moving to Q1 financials, revenue came in at $61 million, gross margin expanded to 19.2%, up 220 basis points year-over-year and up 340 basis points sequentially. Adjusted EBITDA margin was 11.7%, and cash flow from operations surpassed $6 million. We expect tooling revenue to ramp up through 2025, and Alex will give more detail on the evolving revenue mix there. Core's unique business model and execution discipline create a durable competitive advantage, supporting margin stability and healthy cash generation even in a challenging economic environment. Even though John is here on today’s call to help with some investor questions while we go through our CFO transition, I’m glad to have Alex with us, and Alex is going to walk through the specifics of our first quarter financials. Alex?

Alex Panda

executive
#3

Thanks, Dave, and good morning to all of you. For Q1, net sales came in at $61.4 million, a decline of 21.4%. As we noted previously, this was expected and largely the result of softer demand in the medium and heavy-duty truck vertical along with power sports, partially offset by gains in our building products and markets. Our first quarter gross margin kept improving, reaching $11.8 million, or 19.2% of sales, versus 17% in the same quarter last year. As Dave pointed out, gross profit margin rose 220 basis points compared with a year ago and was up 340 basis points versus the fourth quarter of 2024. The improvements in gross margin stem mainly from a favorable product mix, operational efficiencies, and better raw material costs. Because the bulk of Core's cost of sales is variable, our capacity to hold gross margins inside the targeted range depends on how well we control variable expenses as demand shifts. We generally have solid visibility into demand, which lets us cut variable costs when needed and lessen gross margin swings when revenues fall. SG&A expenses in the first quarter totaled $8.9 million, including $500,000 of severance tied to earlier restructuring. If you exclude severance, first quarter SG&A costs were $8.4 million, versus $8.6 million a year earlier. The reduction in SG&A costs came mainly from lower labor and benefits, including bonus accruals, partly offset by unfavorable foreign currency translations of $343,000. Through our Q4 reduction efforts, some employees stayed on until Q2 of 2025 to ensure an orderly transition; we expect the restructuring to deliver both gross margin and SG&A savings in 2025, with some already showing up in first quarter gross margins. As we communicated before, our must-win battle this year is investing in growth; we're directing a portion of the restructuring savings toward additional sales resources, plus market analysis, so we can concentrate our sales efforts in certain markets. Operating income for the quarter was $2.8 million, or 4.6% of sales, versus 6.1% of sales in the year-ago period. Net interest expense came to $16,000 in the first quarter, compared with $82,000 in the quarter a year ago. The lower net interest expense was mainly the result of higher interest income from cash accumulation that earns interest income. The first quarter's effective tax rate was 25.6%, versus 21.5% in the prior year quarter, driven by an income shift among our jurisdictions. Net income for the first quarter was $2.2 million, or diluted income per share of $0.25, versus net income of $3.8 million, or diluted EPS of $0.43 in the comparable year period. If you exclude the impact of severance, our first quarter diluted EPS would have been $0.29, compared with the $0.43 in the same period a year ago. First quarter adjusted EBITDA was $7.2 million, or 11.7%, an improvement over the 11.2% EBITDA margin in the year-ago first quarter. We generated $6.1 million in GAAP cash from operations, up from $5.1 million a year ago. Following $1.8 million in capital expenditures during Q1, we generated positive free cash flow of $4.3 million across the first three months of the year. For 2025, we're projecting capex in the range of $10 million to $12 million, with several significant press upgrade projects slated for completion in Q2 of 2025. At March 31, 2025, our total liquidity stood at a robust $94.5 million, comprising $44.5 million in cash along with $50 million accessible through the revolver and capital credit lines. Term debt finished the quarter at $21.1 million, and our ratio of debt to trailing 12 months of EBITDA remains below one times. Return on capital employed, which is a pre-tax metric, came in at 8.7%, or 11.7% when cash balances are excluded. Both of these figures are derived from trailing 12 months of operating income relative to total capital employed; softer sales volume put pressure on asset utilization; we have enough production capacity in place to support at least $450 million in annual revenues, and as our production schedule fills out, return on capital employed should rebound. Our earnings release contains GAAP to non-GAAP reconciliation tables. Growth remains the focus of our capital allocation strategy — both organic and inorganic via acquisitions — along with managing debt for flexibility and repurchasing shares; we'll stay disciplined and selective when it comes to Core's M&A activities; we also recognize that strategic growth for Core Molding will drive enterprise value expansion, robust cash flow generation, and improved return metrics. In Q1, we bought back roughly 63,000 shares at an average price of $14.50. Dave will share more on our full-year expectations shortly; for the first half of 2025, we now anticipate revenues declining between 10% and 15%, versus our prior guidance of down 5% to 10%. This guidance change primarily reflects tooling sales moving into the back half of the year as well as weaker-than-anticipated product sales in the heavy and medium-duty truck market stemming from macroeconomic and regulatory uncertainties. One-time tooling sales get recognized upon customer acceptance of the tools, so from a timing perspective they are sporadic by nature and frequently shift between quarters. Regarding tariffs, as John noted last quarter, the majority of our raw materials come from U.S. sources; we keep working to mitigate tariff effects on raw materials sourced outside the U.S., though we anticipate passing through incremental costs to customers. We'll watch and modify our cost structure in response to any customer demand effects, since many OEMs we serve have operations in Canada and Mexico. While our products in Canada and Mexico comply with USMCA and presently face no tariffs, those tariffs could affect our customers' sales, which in turn might affect their demand for our products; we're collaborating closely with our customers to grasp this impact and modify our production levels as needed. I'd like to hand it back over to Dave. Dave?

David Duvall

executive
#4

Appreciate that, Alex. During the first quarter, we bought back more than 63,000 shares — close to $1 million worth of stock — and then after the quarter closed, we added another $1 million in share purchases. To us, those buybacks represent a high-return investment in our own transformation and future. We're still actively engaged in M&A conversations. We got very close to an acquisition in the prior quarter, but in the end the seller went with a private equity buyer. That said, our pipeline is still strong and matches up with our strategic priorities. As is the case for many companies, macro uncertainty means we aren't giving formal revenue guidance for 2025; we're watching global trade dynamics along with possible regulatory shifts, such as the EPA's 2027 rule, which could move around the timing of demand in key markets; when we spoke with executives at our large truck customers, they told us specifically that they anticipate no changes to model year 2027 emissions. Our team stays in constant touch with customers, and we're ready to adapt quickly. Even though full-year revenue expectations remain unclear, we think we can hold gross margins in the 17%-19% range across the full year by adjusting our variable costs as demand fluctuates. On the internal side, our focus is on scaling operations and leveraging our fixed cost base. Our sales and marketing team is growing wallet share by getting involved early in customer design cycles and promoting our full range of capabilities, including proprietary SMC formulations, large part molding, and now Topcoat Paint. High-value parts and sectors where our technical differentiation gives us an edge remain our priority. Those include construction, energy, industrial, and medical markets. Our technical solution sales approach is producing better customer engagement, and trade show participation is expanding our sales funnel. M&A stays an active piece of our long-term growth plan, but we're equally confident in our organic growth opportunities, especially through deeper integration with existing customers and entry into adjacent markets. I'd like to thank our team for the continued execution, our customers and shareholders for their trust, and our board for its ongoing support. Finally, I want to share that Alex Panda, Eric Palomaki, our COO, and I will be at the East Coast Ideas Conference in New York City on June 11th. We look forward to connecting with many of you there. With that, let's open the line for questions. Operator?

Chip Moore

analyst
#5

Morning. Hello, everyone. I appreciate you answering my question. Alex, glad to have you on the call. I'd like to start with growth, if I could, and maybe hear a bit more from you, Dave. You mentioned roughly $15 million in annual new business, I believe. On that SMC shorter quote-to-cash, could you speak to what capacity and potential exist there, and perhaps share additional detail on the funnel for new opportunities?

David Duvall

executive
#6

Sure. We're quite enthusiastic about SMC. We've been promoting it for some time, truly establishing the capacity and the processes so that SMC can be sold; in the past we really didn't concentrate on it; we view it as a continuing revenue opportunity for us in genuinely selling our proprietary SMC. This goes into the construction industry. Consider many of the doors and windows, items of that nature. On the exterior they're SMC composite, typically with a corrugated material inside; we see many opportunities there and also in supplying SMC into additional markets. I think something significant for us is that this is much shorter in terms of the quote-to-cash cycle time. What you're really doing is giving the green light to a material that has either already received approval or is utilized in different applications, which makes the whole process much quicker and less complicated. In that space, we genuinely have a lot of available capacity. Two machines are dedicated to SMC production. For that market on its own, we see plenty of capacity and capability, plus there's already installed capacity in Columbus to serve it. Turning to the pipeline, the challenge we're running into—and it's something we've been watching for the past several months—is that it's practically flipped upside down: you've got all these quotes flowing in, and based on market conditions, people would rather hold off until they figure out their next move. A great illustration of this: we've got two significant truck clients who are weighing whether production should happen here in America or down in Mexico, correct? From our standpoint, we'd build out capacity accordingly. We'd explored the idea of establishing a brand-new facility around Monterey to serve one of those customers. At this point they're weighing a postponement against shifting it to the States. The real issue is that the end customer keeps pushing back their choices on these big-ticket items. So for us, we're right at that big decision point, because once they make the call to go with Core and say they want to enter the U.S. market, at that stage we're adding capacity or building a plant, and they've got to lay out substantial sums for tooling once they've launched us. That's the real difficulty; we've got a number of sizable openings in truck and power sports. It seems to me that new opportunities are starting to appear, automotive included—think truck beds, that kind of thing. All that's left is for those to move through quoting and get to a final decision.

Chip Moore

analyst
#7

Right, right, that lack of certainty. Do you observe, or would you figure, that your geographic reach — plus the fact that you hold a decent chunk of capacity within the U.S. as well as in Mexico — might turn into a benefit as certain production shifts back to domestic soil?

David Duvall

executive
#8

Not at all — I mean, absolutely. We've already started revisiting prior quotes, typically those involving heavy items with low pack density — perhaps something such as a vault lid, or the flatter and bigger components that used to be produced in China — and we can now move those back to the U.S. We are actively pursuing that. In my view, when it comes to U.S. capacity, we sit in a strong position to return business to the U.S. A major element of our approach involves identifying which openings this creates for Core and figuring out how we capitalize on them and shift them into the U.S.

Chip Moore

analyst
#9

Understood, that's useful. Is there anything else you can share about a few of those different markets you mentioned not long ago? I'm referring to things like medical, hospital beds, turf protection, and a few of those newer categories. How are they performing?

David Duvall

executive
#10

Yes, things are going well. Regarding turf protection, we already have products that have been shipped out. They're in production now, and we're collaborating with the customer we work with on developing the next generation. I believe we're likely among the few rivals capable of molding that as a single piece given the size of the presses we operate, and I consider that a significant edge for us. Additionally, when you begin to examine medical, we keep doing — I believe we perform very well once we've got a customer with a technical product, and once we're involved and they witness what we're able to offer and accomplish, we identify additional chances in medical related to the beds and also large equipment. We view that as a major opportunity for us. We keep pushing further into energy. We perform well with generator bases, that sort of thing. We're noticing increased demand in that area. I believe the key point is that we're succeeding. You're observing victories on the smaller programs, $2 million-$5 million. The larger programs, those big $30 million-$40 million programs we're pursuing, those are the ones you're seeing get delayed because of major decisions.

Chip Moore

analyst
#11

Yeah. That makes plenty of sense. All right. Perhaps only a final question. I believe you mentioned a few significant press upgrades during this quarter. What is happening with those? What benefit does that provide?

David Duvall

executive
#12

Yeah. A number of our presses are, I'd say, getting on in years. They remain in solid condition, yet technology today lets you increase their speed through the valving, plus hydraulics and the controls, the closed-loop controls; we're engaged in, we're genuinely assessing, is it worthwhile? We're assessing a full upgrade on no fewer than one of our presses to determine whether that brings it to the standard we're after. Essentially, it concerns taking a press that functions, functions nicely, but because of the closed-loop controls and the valving it has, you could run it much faster with all the controls brought up to date, essentially the movement speeds and the control positions.

Chip Moore

analyst
#13

Understood. Thanks. Apologies, perhaps just one more — Dave, you mentioned, I believe, that we nearly closed something the previous quarter, yet they opted for private equity. Could you just clarify what you're observing there?

David Duvall

executive
#14

That's precisely where I was headed. Actually, while on this call, I had planned to mention it — I received a phone call, and it was essentially a "it's not you, it's me" situation. We were nearly there.

Chip Moore

analyst
#15

Broadly speaking, are multiples involved there, and is private equity more active? I mean, considering where your book value stands, perhaps even Core is being examined, but I'm just curious about your views on valuations and.

David Duvall

executive
#16

Yeah. You know, prior to Core, I was at Carlyle Group, and our concept of private equity—what we pursued and the value proposition we could offer someone there—was truly about putting money in and growing, and we're going to attempt to push this, expand it, and then sell it. At Core, I believe we bring something quite different. I genuinely felt it was our edge in this situation, where if a company is $20 million-$80 million, it's likely a family business, perhaps one or two plants, with a great deal of legacy, and they truly want a company that will come in, sustain that, and look after the family. I think that's what Core provides to another company seeking to sell. It's that ongoing legacy; we observe that frequently. In this particular case, something else was important, and it took quite some time; it was quite a decision process. I know he was revisiting and going through it repeatedly, and we had numerous conversations. Yeah. Chip, what we're observing in the market for acquisitions is multiples ranging from 6 to 7 for some of the companies we've examined. As Dave mentioned, we were competitive with our pricing on this one. It's simply that the owner chose PE for other reasons.

Chip Moore

analyst
#17

Understood. No, I appreciate that. Alright, I'll jump back in. Thanks a lot.

David Duvall

executive
#18

Okay then. We appreciate your ongoing interest in our company, and we're eager to share an update on our progress when we release the second quarter results. Thanks, and enjoy the rest of your day.

Operator

operator
#19

That wraps up the call for today, and you're free to hang up your phones now. We appreciate you taking part.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Core Molding Technologies, Inc. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.

Get the API View API docs →

This call discussed

For developers and AI pipelines

Programmatic access to Core Molding Technologies, Inc. earnings transcripts and 132,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Core Molding Technologies, Inc. or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.