Core Molding Technologies, Inc. (CMT) Earnings Call Transcript & Summary
August 5, 2025
Earnings Call Speaker Segments
Sandy Martin
executiveThanks, and good morning to all of you; we're glad you could be with us on the Core Molding Technologies call, where we'll go over what we achieved in the second quarter of 2025. On the line with me today are David Duvall, the company's President and CEO, along with Eric Palomaki, our COO, and Alex Panda, our CFO. A webcast of this call is available, and you can reach it at core-mt.com through an audio link located on the Investor Relations Events and Presentations page. This conference call, the Q&A portion included, is being recorded. Please keep in mind that time sensitive information could cease to be accurate as of when any replay is heard or a transcript is read. I'd also like to note that anything discussed today that isn't a historical fact — including statements or expectations regarding future events or future financial performance — constitutes forward-looking statements, which are made under the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. Forward-looking statements carry uncertainty and lie outside the company's control. Results that actually occur could differ materially from those expressed or implied. For our disclosures on forward-looking statements, please see today's earnings press release. These factors, along with other risks and uncertainties, are described in detail in the company's filings with the Securities and Exchange Commission. Core Molding Technologies undertakes no obligation to publicly update or revise any forward-looking statements. Management will refer to non-GAAP measures, among them adjusted EPS, adjusted EBITDA, the debt-to-trailing 12-month EBITDA ratio, free cash flow, and return on capital employed. You can find reconciliations to the nearest GAAP measures at the end of our earnings release. Our earnings release has been submitted to the SEC on Form 8-K, and at this point I'd like to hand the call over to the company's President and CEO, David Duvall.
David Duvall
executiveThanks, Sandy, and I appreciate everyone being here with us today. I'm happy to report that we have taken significant strides in our investor growth strategy, surpassing our objectives for new business wins and completing a major organic growth investment under our capital allocation plan. To start, during the first half of the year we brought in $47 million in new business, and 99% of that was incremental; that beats the $45 million in new wins we recorded for the full year of 2024. Our team deserves tremendous credit for their dedication, cross-functional teamwork, and company-wide involvement in reaching this important investor growth milestone; we keep adding resources to sales and marketing so we can pursue new markets, with wins in aerospace such as satellite receiver bases, along with both EV cars and buses. Our campaign to market and sell SMC, or sheet molding compound, is producing results. As we mentioned previously, it comes with a short quote-to-cash cycle, and we have built out the necessary capacity. By using AI programs for lead generation, we have pinpointed immediately addressable opportunities worth more than $200 million in SMC by itself, and right now we are in conversations with a large number of those prospective customers; all the improvements we've implemented in our SMC operations regarding capacity, consistency, and performance of our formulations are giving us an edge in the marketplace; this represents an exciting new revenue stream for the company that is already generating new revenues. Momentum is building in our investor growth strategy, and it's genuinely thrilling to watch the whole organization get behind our numerous customer-focused initiatives. Among our new wins this year is the Volvo Mexico truck business, and I take pride in what our team has achieved and in our continued capacity to deliver on our commitments. Securing this program and working alongside Volvo at their new Mexican facility is a gratifying achievement for everyone here; we're honored to serve as a trusted partner as they begin production from their new manufacturing site in Mexico, and I believe it shows the ongoing evolution and development of our organization's capacity to keep improving, which sits at the core of our business objectives. Second, to back the new business and the additional future business we anticipate, we are putting $25 million to work, which includes expanding our Matamoros plant plus a new plant and equipment in Monterrey, Mexico. Organic growth has ranked as our top priority within our capital allocation strategy, and this investment doesn't just kick off a major truck program — it also brings DCPD molding, or reaction injection molding, and top coat paint capabilities to our Monterrey facility; we're enthusiastic about these organic growth investments that add capacity and capabilities at our Matamoros and Monterrey locations, since we have known incremental wins that underpin the investment model. Bringing DCPD molding to Monterrey moves us nearer to additional big customers who see value in this process, and by adding top coat paint, we can now deliver to the customer a product that is fully molded, assembled, and finished with top coated paint. Through our Voice of the Customer program, the demand for top coat paint has been made plain to us, particularly in sectors such as construction and agricultural machinery and aerial lifts. This marks a significant milestone in how we allocate capital, and we're eager to keep expanding our business with Volvo and other customers as our capabilities grow and new revenue streams take shape. Such programs run for the long term, and we expect them to bring in $150 million of revenues across the coming seven to 10 years. It's genuinely thrilling to announce these fresh wins and expansion investments, since they reflect the considerable strides made by our sales and marketing function and throughout the whole organization. Thanks to new wins booked this year and last year, we anticipate returning to more than $300 million in annual product revenues within the next two years, even with truck and power source demand sitting where it is now. Once you add the scale of these new wins on top of our ongoing margin expansion efforts, our future business model becomes something quite exciting. Everything we're doing in operations, pricing, customer focus, and sales development is plainly evident in our results and our outlook for the business ahead. To sum up, we'll keep doing three things: first, successfully pushing sales growth into new markets; second, enhancing our margin profile via operational excellence and our innovation pipeline; and third, investing in growing a business that has shown it can execute well. Building a world-class partner in engineered material and manufacturing solutions is the heart of it all. Now, moving to our Q2 financial results, revenue came in at $79.2 million, with gross margins of 18.1%. Adjusted EBITDA margin rose to 12%, an increase of 30 basis points over Q1, while cash flow from operations tops $9 million for the first half of the year, surpassing our year-to-date net earnings. As anticipated, tooling revenue climbed by nearly $13 million from Q1 to Q2, and we foresee additional tooling growth this year stemming from new business wins landed last year. Once again we posted strong gross margins this quarter, landing within our projected range, with profitability improving sequentially versus the first quarter, along with positive year-to-date free cash flows. As anticipated, second quarter sales fell by low double digits relative to the prior year period, which is a sequential improvement over the first quarter. Holding strong gross margins, profitability, and positive free cash flow while facing year-to-date double-digit revenue declines in the first half stands as strong evidence that our must-win battle initiatives over the last four years have paid off, and even more importantly, we've shown consistently good execution. Alright, prior to handing things off to Alex for a thorough rundown of the finances, I've requested that Eric offer a few remarks regarding some highlights from Q2.
Eric Palomaki
executiveAppreciate that, Dave, and hello everyone. I've had the chance to meet a good number of you already, and to those I haven't met yet, I look forward to sitting down together at some point. In a few moments, I'll take you through the newest footprint optimization initiative we've undertaken, which fits well with the culture of continuous improvement that exists at Core Molding. First, though, I'd like to call attention to a few additional accomplishments and honors involving our company and some of our team members. The American Composites Manufacturing Association, also known as ACMA, gave its Pioneer Award to our Director of Material Science, Vinod Arora — a recognition of the essential part he played in advancing the composites sector through both innovation and technical know-how. I've personally had the privilege of working alongside Vinod for the last seven years. His extensive experience and 40 years in the industry make him an incredible asset to Core Molding Technologies; we're proud of Vinod and the whole Material Science team for the industry advancements and competitive proprietary innovations they've delivered to our customers. Not long ago, our leader and my mentor, David Duvall, was nominated for a 2025 Smart 50 Award for leading the implementation of a smart organization and building an enduring organization of products with long-term sustainability. That's an honor for David as well as the company, and we look forward to attending this event later this month. I also want to update you on the footprint optimization work we kicked off late in Q2. We're aiming to wrap that up before the year ends, and it fits with our continued emphasis on making money at the product level. Right now, truck demand is soft, and that opened the door for us to bring our resin transfer molding, or RTM, process together by moving certain programs into a different one of our plants. This move should make things run more efficiently at the site those programs are leaving, and we anticipate it will improve margins. Alex is going to walk through additional specifics in a moment. Last, I want to recognize our operations teams for hitting 99% on-time deliveries and turning in a strong 62 PPM. One key quality metric our customers rely on is PPM — that stands for defective parts per million produced. When that figure comes in below 0.01%, it signals excellent quality and shows how precise our quality processes really are. On top of that, we've kept safety incident rates and employee turnover rates at levels that are among the lowest in the industry, and that's something we're proud of. These metrics are trending in a favorable direction, which speaks well of our culture and our dedication to excellence at every one of our plants. With that said, I'd like to hand things over to Alex now so he can walk everyone through the financials.
Alex Panda
executiveThanks, Eric, and good morning to all. Net sales for Q2 came to $79.2 million, which is a 10.7% decline versus the prior-year period. As was the case last quarter, product sales fell off because of softer demand in power sports, building products, and the medium and heavy-duty truck verticals. Partially offsetting that were sales of new products to customers in building products as well as the industrial and utilities markets. Tooling revenue, as anticipated, increased by more than three and a half times relative to last year, driven mainly by customer launches tied to our 2024 business development activities. Even with operating leverage pressure in Q2, our gross margin held at $14.3 million, equal to 18.1% of sales. We're happy with how stable our gross margin rate has been, especially considering the big shift in sales mix toward more tooling revenue; we keep partly offsetting reduced leverage through operational efficiencies, cheaper raw materials, and margin optimization. For this year, we're sticking with our targeted gross margin range of 17%-19%. SG&A expenses in Q2 were $9.1 million, or 11.5% of sales, unchanged as a percentage of sales from the year-ago period. If you exclude Q2 severance costs of $479,000 and footprint optimization costs of $200,000, adjusted SG&A costs would have come in at $8.4 million. As Eric mentioned, we intend to put $1.5 million into a footprint optimization project this year, which means moving production of RTM products to a different plant; we expect this project to deliver direct cost savings exceeding $1 million per year, starting in January of 2026; during the second quarter of 2025, adjusted SG&A expenses were lower than the same period last year thanks to reduced labor and related benefit costs, along with bonus accruals and favorable foreign currency translation. Operating income for the quarter reached $5.2 million, or 6.6% of sales, a drop from $7.5 million, or 8.4% of sales, in the prior-year period. The interim effective tax rate for Q2 was 24.4%, versus 16.3% a year earlier. That rise stems from taxable income being generated this quarter in jurisdictions with higher tax rates. Net income in Q2 was $4.1 million, or $0.47 in diluted income per share, compared with net income of $6.4 million, or diluted EPS of $0.73, in the comparable year period. Leaving out the impact of severance and footprint optimization costs, our Q2 diluted EPS would have been $0.53. Adjusted EBITDA for the second quarter was $6.5 million, or 12% of sales; we produced $9.6 million in GAAP cash from operations, and following capital expenditures of $4.4 million, our free cash flow came to $5.2 million for the first half of 2025. We still expect our pre-planned physical 2025 capital expenditures to land at roughly $10 million-$12 million. Beyond the capex we'd already planned, we anticipate putting roughly $25 million into the Volvo Mexico business award across the coming 18 months, and somewhere between $8 million and $10 million of that should be out the door before physical 2025 wraps up. At June 30th, the balance sheet stood in solid shape, with total liquidity of $93.2 million — that's $43.2 million of cash along with $50 million we can draw on the revolver and capital credit lines. Term debt finished the quarter at $20.6 million, and on a trailing 12-month basis our debt-to-EBITDA ratio is still under 1x. Return on capital employed came in at 7.2%, or 9.6% if you strip out cash. As new business keeps launching, we look for that metric to strengthen through improved leverage of top-line results and more efficient use of assets. Both ROCI figures are pre-tax and rely on trailing 12 months of operating income and total capital employed. GAAP to non-GAAP reconciliation tables are available in our earnings release. Our approach to capital allocation stays flexible, leaning heavily toward organic growth while also managing debt and working capital with discipline and buying back shares. During the first half of the calendar year, we bought back 151,584 shares at an average price of $14.82, leaving $2.5 million available under the board-authorized buyback program; for the back half of the year, we anticipate sales falling 4% — 6% versus the comparable period a year ago. As we talked about earlier in the year, tooling revenue should account for a larger share of total sales than it did a year ago. Keep in mind that one-time tooling sales get recognized once the customer accepts the tools, so they can move around from quarter to quarter. On tariffs, our products made in Canada and Mexico meet USMCA requirements and currently face no tariff. Even so, we'll keep watching closely for how trade policy shifts impact our customers and the markets they serve. And we'll keep rebaselining expenses so they line up better with what customers are demanding. With that, I'll hand things back over to Dave.
David Duvall
executiveThanks, Alex. The results from the first half of 2025 show we're making deliberate, ongoing gains in how we operate — that's just inherent to what Core Molding does. On top of that, we're putting strong emphasis on growing our operations further, making the most of our fixed cost structure, and fine-tuning where our portfolio sits. Because that work matters so much, the people in sales and marketing keep putting priority on areas where our own materials and technical edge give Core Molding a competitive advantage that's hard to match. We aim at big, varied markets — construction, energy, industrial, aerospace, and medical among them. To grow wallet share, our sales groups get involved right at the start of the design cycle, showing customers everything we can add, from SMC formulation to molding of large parts to top coat paint. This year's wins in newer markets have us energized — the new pickup box panels for small EV trucks, the satellite tracking systems, and landing the Volvo Mexico business — each one a sign that things are moving in the right direction. We're putting money into moving and optimizing certain large presses, and we're opening a new facility close to our current one in Monterrey, Mexico, to handle fresh business wins in that area. For big OEMs nearby that we already serve, we intend to grow our DCPD molding, or reaction injection molding, processes, and we'll bring in top coat paint so we can offer a full-service partner approach. There'll be more detail on this during our next earnings call, but on the whole, whenever customers entrust us with their long-term business, we're prepared to invest. Another point of pride: we've kept gross margins between 18% and 20%, even with substantial top-line pressure this year. Keeping our attention on constant performance gains puts Core in position so that when top line expands, that favorable operating leverage flows down to the bottom line. We'll keep bolstering our operations and doing what's needed to build long-term business capability and profitability. Construction and transportation hold the most promising opportunities we see, yet we're certain this is just getting started. Fresh areas keep appearing and will keep developing within construction, like the windows market, and further in industrial for customers looking for composite mats. As we said before, we project that new program launches from existing customer wins across the next two years, taken together, will bring us back to yearly product revenues above $300 million. Beyond that, our portfolio capacity — presses, processes, and automation included — can support top-line growth up to $450 million. Even with our first half business wins, we remain humble. The major markets we serve continue to show demand lower than anticipated. Tariff uncertainty is creating some market delays, both in demand and in how new programs get awarded; one major truck customer called this year the great pause; we do see signs of movement toward stabilization, and we're getting ready for the revenue rebound when it comes. We keep pushing ahead with our investor growth initiatives in 2025, and we're identifying ways to bring in new customers and grow wallet share among existing ones. The profitability gains from our must-win battle give us room to put money into future growth and greatly lessen the swings in our margins; separately, I want to talk about the news of my planned succession, which went out shortly after this morning's earnings release. Come the end of May 2026, I intend to step down as President and CEO of the company. Under our succession plan, I'll stay deeply engaged with strategy in the role of Executive Advisor to the board and leadership team through December of 2027 — those next 19 months; the strategic transition has been in the works for more than two years, and the board and I are completely behind Eric Palomaki as the person to take my place. For this role, Eric brings the right passion, skill set, and leadership abilities. Eric has played a key part in building Core's business systems, and his deep institutional knowledge of those systems will make for a seamless transition. Eric is a gifted professional with a sharp knack for developing and driving innovations in product development, as shown by some of our recent wins. Throughout the business transformation, Eric and I have worked as partners, and he has gained the respect of the whole organization along with our customers, which will let him succeed in moving the company ahead, preserving Core's fundamental values, and making sure our investor growth strategy is executed with discipline. Over Eric's seven years of work, he has consistently shown outstanding leadership qualities, remarkable innovation in new products, and a thorough grasp of our industry. As with other executive transitions at Core Molding, Eric has gone through a demanding executive training process, both inside and outside the company, and worked alongside the full management team at every stage. His promotion last year to Chief Operating Officer let him lead and collaborate with every level of the organization as preparation for this next step. Now I'd like to thank our team for their ongoing dedication and excellence, our customers and shareholders for their trust, and our board for its continued support. Finally, I want to mention that Eric, Alex, and I intend to be at the Midwest Ideas Conference in Chicago on August 26th. We're eager to connect with many of you for further discussions while we're there. With that, let's open the line for questions. Operator?
Chip Moore
analystGood morning, folks. Appreciate you fielding this.
David Duvall
executiveHi there, Chip.
Chip Moore
analystHi, Dave. To start, I believe some congratulations are deserved — for you, Dave, and for Eric too. Well done.
David Duvall
executiveThank you, Chip.
Chip Moore
analystYeah, let me kick things off. Dave, you came across as fairly optimistic about the growth picture, especially about getting product revenues back above $300 million. My recollection is you mentioned that happening over the next two years. Did I understand you correctly that this holds even if truck and power remain at somewhat depressed levels? How should we frame that? With Volvo ramping in 2027, I'd imagine — any perspective on product revenues for next year?
David Duvall
executiveYeah. Our expectation would be that the truck market begins to recover. We noted ACT pointed to sometime in 2026; we aren't truly counting on that. Given the new wins from the prior year and this year, launching this year and into next year, plus the Volvo program, we have a clear line of sight to being back at $300 million in product revenues.
Chip Moore
analystUnderstood. So capacity sits at $450, meaning you're sitting pretty on that front.
David Duvall
executiveRight. The sole issue we ever run into regarding capacity — much like we've mentioned before — is that occasionally the appropriate press size isn't available where it's needed.
Chip Moore
analystOkay. No, that's fantastic. Regarding the pipeline, those recent wins are really something, aren't they? $47 million above what we had a year ago, and I believe it stood at just $30 million only 2 months back. Where exactly are those additional wins coming from, and how do you see the pipeline shaping up for the second half of the year?
David Duvall
executiveYeah, I'd say we're genuinely thrilled and eager to stay thrilled about the industrial side for the mats. That work is still ongoing for us. There are additional possibilities in that space. We're collaborating with certain clients, such as those in construction, for instance UFP, on several quite distinctive projects with prospects on the horizon. When it comes to the wins, really, we're looking at the EV and municipal buses along with the small truck programs in terms of leveraging our composite methods for truck beds and tailgates. That represents fairly substantial volume, plus the panels and the Volvo Mexico. To my mind, the satellite business represents a fresh market for us, one where we perceive the chance for real growth. We've already secured some wins there that we've announced within that $47 million.
Chip Moore
analystUnderstood, that's useful. Dave, the
David Duvall
executiveRight, the major item we're pushing hard on whenever we discuss near-term gains is essentially getting our SMC out there more. We've put substantial effort into our plant regarding cold storage, plus how we mature the SMC, along with capital investments aimed at truly stabilizing and boosting output, consistency, and the pace at which we can produce it. Our capacity and consistency there have gone up considerably; and now, with AI-driven lead generation being used, the result was honestly far bigger than I'd expected. I believed I had it figured out, but I really didn't.
Chip Moore
analystYeah, the AI is amazing. Dave, you mentioned, I believe, that you're following a lead generation figure of more than $200 million.
David Duvall
executiveThat's actually understating it. Right, it's bigger than that. We removed what we refer to as captive. When you examine the SMC market, the companies that mold SMC the way a Core does — they'd be the biggest SMC producer, but they stay captive within their own sector. Typically SMC represents a significant portion of the value proposition. Either you have to produce it as part of what you offer, or you must ensure you're purchasing consistently high-quality SMC that can be molded and possesses the features you require. We deducted what we term the non-aggressibles.
Chip Moore
analystThat can be reached right away, and you've got the room available to handle it; it doesn't need to be hauled at a particular temperature or anything along those lines. Just take me through it.
David Duvall
executiveYeah, we've discussed that a fair amount. We're able to cover roughly three-quarters of it; during that period, we could bring in additional capacity if required.
Chip Moore
analystUnderstood, and that's really useful. Perhaps I should ask one more thing. When we talk about that $25 million in CapEx down in Mexico, clearly that's for Volvo, but what about the nearby chance with some of your other customers? I believe you mentioned the paint, the top coat, and.
David Duvall
executiveYes, definitely; that fits within our strategy. You've described it exactly; that's the way we see it. With that $25 million, we need to expand our Matamoros site. DCPD, or reaction injection molding, is going to be relocated out of there. We're going to shift that to a Monterrey location near the one we currently have. As you may recall, our Monterrey site is just 50,000 sq. ft. It's leased, it's landlocked, so there's really no way to do anything further with it. We're relocating to a site quite near where we are now that is 150,000 sq. ft. Top coat paint, DCPD, structural foam will be placed there, and we're also evaluating large part high-pressure injection molding. That site positions us with DCPD near one of our other big customers; it cuts their logistics costs substantially and creates chances to expand more business with them.
Chip Moore
analystAll right, excellent. No, I'm grateful that you're fielding every question. I'll jump back into the queue. Thank you.
David Duvall
executiveThank you for that.
David Duvall
executiveOkay. I’m not sure whether there are any further questions. It doesn’t look like any are coming in.
David Duvall
executiveWe appreciate that you keep following our company, and we're eager to share where things stand once we announce what we achieved in the third quarter. Thanks so much, and enjoy the rest of your day.
Operator
operatorThat wraps up the call for today, and you're free to hang up your phones now. We appreciate you taking part.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Core Molding Technologies, Inc. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.
Get the API View API docs →This call discussed
For developers and AI pipelines
Programmatic access to Core Molding Technologies, Inc. earnings transcripts and 132,000+ others is available through the
EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments,
full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.
More tools for stock research
OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Core Molding Technologies, Inc. or any ticker on your watchlist.
StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.