Cummins Inc. (CMI) Earnings Call Transcript & Summary

August 4, 2026

New York Stock Exchange US Industrials Machinery earnings 56 min

What were the key takeaways from Cummins Inc.'s August 4, 2026 earnings call?

In the second quarter of 2026, Cummins Inc. reported record sales of $9.5 billion, a 9% increase year-over-year, and EBITDA of $1.7 billion, representing 17.5% of sales. The company raised its full-year revenue guidance to a growth range of 10% to 13%, up from the previous 8% to 11%, reflecting strong demand across key markets, particularly in power generation and North America. Management emphasized their confidence in future growth driven by expanding capacity and strategic partnerships, especially in the data center segment.

What topics did Cummins Inc. cover?

  • Revenue Growth Acceleration: Cummins achieved record second quarter sales of $9.5 billion, a 9% increase compared to the prior year, driven by higher demand in power generation and construction markets. Management stated, "Growth was driven primarily by higher global demand and power generation markets, particularly from data centers and international construction markets."
  • Increased Full-Year Guidance: The company raised its full-year revenue growth outlook to 10% to 13%, up from 8% to 11%, indicating stronger-than-expected demand in North America and China. Jennifer Rumsey noted, "We have raised our full year outlook once again as demand continues to build across several key markets."
  • Power Generation Demand: Power generation revenues increased by 19% in the second quarter, reflecting strong demand particularly from data centers. Mark Smith highlighted that, "The increase in EBITDA dollars was primarily driven by higher global power generation volumes and stronger international construction demand."
  • EPA Regulatory Clarity: Management expressed confidence in navigating the upcoming EPA 2027 emissions regulations, stating that the proposed rule allows for a smoother transition to new engine platforms. Rumsey mentioned, "This balanced approach also helps maintain product availability, continue bringing new innovative products to market and support a successful industry transition."
  • International Revenue Growth: International revenues grew by 12%, with China reporting a significant 30% increase year-over-year. Rumsey noted, "Second quarter revenues in China, including joint ventures, were $2.3 billion, an increase of 30% year-over-year, driven by accelerating data center demand as well as improving on-highway and construction markets."

What were Cummins Inc.'s August 4, 2026 results?

  • Revenue: $9.5 billion (+9% YoY)
  • EBITDA: $1.7 billion (17.5% of sales)
  • North America Revenue Growth: 8%
  • International Revenue Growth: 12%
  • China Revenue: $2.3 billion (+30% YoY)
  • Dividend Increase: 10%

Cummins' strong second quarter performance and raised guidance reflect robust demand across key markets, particularly in power generation and North America. However, capacity constraints pose a risk to sustaining growth. Investors should monitor the company's ability to navigate regulatory changes and manage production transitions as potential catalysts or risks moving forward.

Earnings Call Speaker Segments

Nick Arens

executive
#1

Thanks, Paul. Morning, everybody. Glad you could join this call as we go over what Cummins achieved in Q2 of 2026. Here with me are Jennifer Rumsey, who serves as our Chair and Chief Executive Officer, along with Mark Smith, our Chief Financial Officer. Once the teleconference wraps up, all of us will stick around for questions. One thing before we dive in: a portion of what you hear or receive from us today falls under forward-looking statements as defined by the Securities Exchange Act of 1934. Statements like those lay out our projections, anticipations, aspirations, convictions, and plans tied to future strategy. A number of risks and uncertainties could cause what actually happens down the road to diverge significantly from what those forward-looking statements anticipate. You can find additional details about those risks and uncertainties in the forward-looking disclosure statement included in the slide deck, as well as in the documents we file with the Securities and Exchange Commission — specifically the Risk Factors portion of the annual report on Form 10-K we filed most recently, plus any quarterly reports on Form 10-Q filed after that. We'll also touch on several non-GAAP financial measures during this call. For the reconciliation of those measures against GAAP financial measures, we'll point you to our website. Our press release, which includes the financial statements, and a copy of the webcast presentation for today can be found on our website in the investor relations section at cummins.com. Now that all of that is squared away, I'll hand things to our Chair and CEO, Jennifer Rumsey, to get us started.

Jennifer Rumsey

executive
#2

Thanks, Nick. Good morning, everyone. I'll begin by recapping what we achieved in the second quarter and how our financials came in, and after that I'll go over sales and end market trends region by region. I'll wrap up by talking about what we expect for 2026. Mark is going to take you through more specifics regarding both our second quarter results and our forecast for the entire year. Before I dive into how we performed, let me call out several significant developments from the quarter. Back in May, we held our 2026 Analyst Day, and at that event we lifted the 2030 financial targets we'd previously set and restated how firmly committed we are to giving capital back to shareholders; that speaks to the fact that our strategy is delivering. We're strengthening our standing in important markets and seeing demand for what we make keep rising; as global investment in data centers keeps climbing, we also laid out plans to grow our worldwide capacity even further and to widen our power generation lineup through integrated power solutions along with the creation of a 130 L natural gas genset, which takes us into the expanding prime power market. Since that Analyst Day, our momentum in the data center space has kept building; we signed a multi-year deal not long ago with a Global Hyperscaler, which grows a partnership we've had for a long time and gives us visibility into multiple gigawatts of backup power genset demand ahead. That deal strengthens how confident we feel about our growth outlook and backs up the capacity expansion that's already in motion. In June, we told you about an agreement with Circe Energy to supply QSK60 and HSK78 natural gas generator sets together with integrated microgrid technology for a behind-the-meter prime power solution that will serve a high-performance computing data center in Texas. That project shows we can deliver integrated power solutions, make customer partnerships deeper, and grow our footprint in the expanding prime power market. Last month, the EPA issued the proposed rule everyone had been waiting for, which brings more clarity on how the North America On-Highway 2027 emissions regulations will be implemented for our industry. Given what's in that proposed rule, we said we intend to take advantage of the implementation flexibilities the EPA set out in order to support a measured transition to our new HELM engine platforms. This approach is meant to meet the proposed regulatory framework and help OEM customers keep to their production schedules, while also delivering extra real-world operating experience that will help end users gain confidence in our new engines. Such a balanced approach also assists in keeping product availability up, continuing to bring innovative new products to market, and supporting a successful transition for the industry. As part of our phase transition, we intend to start limited production of the model year 2027 X15 engine in January 2027, in line with the launch plans of individual OEMs, with production rising gradually and full production anticipated to start in the fourth quarter of 2027. We also intend to start limited production of the model year 2027 X10 in January 2027, with full production anticipated by the third quarter of 2027, subject to OEM launch plans. Throughout the transition, the X12 and L9 engines currently used in truck and transit bus applications should stay available under the EPA's proposed rule. As we said before, the next generation of our B platform should arrive in January 2028, while the existing B platform will remain on sale throughout 2027. During this changeover, we'll keep coordinating tightly with our OEM partners, dealers, fleets, and other end customers so that product availability and launch timing line up. We'll also remain actively involved with the EPA, watching its rulemaking and implementation flexibilities, to help make this transition a success for our customers and the industry; these steps show our dedication to delivering for customers, executing with discipline, and putting money into products and technologies that drive long-term profitable growth. Now I'll move to how the company performed overall in the second quarter of 2026 and touch on several of our key markets. Second quarter sales reached a record $9.5 billion, which is 9% higher than the second quarter of 2025. The growth came mainly from stronger global demand in power generation markets, especially data centers and international construction markets. EBITDA in the quarter set a record at $1.7 billion, or 17.5% of sales, versus $1.6 billion, or 18.4% of sales a year ago. That EBITDA gain largely stemmed from larger volumes, greater joint venture earnings, and favorable pricing, partly offset by tariffs and increased variable compensation costs tied to our projections for record full-year earnings. North America revenues in the second quarter rose 8% from the second quarter of 2025. Heavy-duty truck industry production came to 60,000 units in the second quarter, a 4% decline from 2025 levels, while our heavy-duty unit sales totaled 23,000, a 2% rise year-over-year. Medium-duty truck industry production was 32,000 units in the second quarter of 2026, up 8% from 2025 levels, while our unit sales reached 29,000, up 19% year-over-year; we shipped 33,000 engines to Stellantis for their Ram pickups in the second quarter of 2026, down 2% from a year ago. North America Power Systems revenues grew 19%, mainly because data center demand stayed strong and because of the extra manufacturing capacity we started up at the end of 2025 to serve that growing customer demand. International revenues rose 12% in the second quarter compared with a year ago. China revenues in the second quarter, including joint ventures, came to $2.3 billion, up 30% year-over-year, fueled by accelerating data center demand along with improving on-highway and construction markets. Chinese industry demand for medium and heavy-duty trucks totaled 378,000 units, up 24% from last year, driven by robust export demand, especially in Africa and Southeast Asia, plus improving domestic replacement demand and growth in battery electric-powered trucks. Our unit sales, including joint ventures, were 53,000 units, up 2%. Chinese industry demand for excavators in the second quarter was 79,000 units, up 34% from 2025 levels. We moved 15,000 units, which was a 35% gain, propelled by export demand tied to mining investments in Africa and Indonesia. The results additionally got a lift from OEM inventory stocking aimed at reducing possible logistics risks in the Middle East, plus ongoing domestic demand bolstered by rural development projects. Power generation equipment sales in China rose 88% during the second quarter thanks to accelerating data center demand. Second quarter revenues in India, including joint ventures, came to $742 million, which is 6% higher than a year ago. Industry truck production climbed 5% from 2025, fueled by greater freight availability, infrastructure, and mining activity. Now let me give our outlook for 2026, along with comments on a number of our key markets. We've raised our full-year outlook yet again as demand keeps building across several key markets; we now anticipate total company revenues will rise 10%-13% in 2026, versus our prior guidance of 8%-11%. This better outlook mirrors stronger demand in North America on-highway markets, ongoing strength in power generation pushed by data center markets, and improved on and off-highway demand in China. We're lifting the midpoint of our 2026 North America heavy-duty truck forecast to a range of 240,000 to 250,000 units, up from our earlier guidance of 230,000 to 250,000 units.

Jennifer Rumsey

executive
#3

This shows solid order trends as of late along with better fleet profitability, and those factors pushed second quarter output past what we had projected while giving us clearer sight into demand for the year's back half. Within the North America medium-duty truck segment, our 2026 forecast is moving up to 130,000 to 140,000 units, versus the 125,000 to 135,000 units we guided previously; the change comes from demand in the back half that beat expectations, helped by brighter OEM outlooks and a slightly larger pre-buy after the latest regulatory clarification. When it comes to both heavy and medium-duty trucks, we believe industry production is mostly locked in for this year's second half. As we guided before, our North American pickup truck engine shipments should land at 125,000 to 140,000 units in 2026. Turning to China, total revenue including joint ventures is now projected to rise roughly 15% in 2026, better than the up 10% we previously expected. That raised view comes from on and off-highway demand that surpassed expectations, especially in the second quarter. Although we look for the usual seasonal softening in the year's back half, we still see full-year demand coming in above what we had earlier anticipated; for China heavy and medium-duty truck demand, the range we now expect is down 5% to up 5%, versus prior guidance of down 10% to flat. Export demand that beat expectations, especially from Africa and Southeast Asia, is behind this. In India, as guided before, total revenue including joint ventures should grow 2% in 2026. That figure incorporates our assumption that industry truck demand sits flat at the midpoint of our guidance, aided by tax rate cuts and strengthening underlying demand. On global construction, demand is now expected to land anywhere from flat to up 10%, an upgrade from the down 10% to flat we previously outlooked; within China construction, export demand is running hotter than we had assumed, while domestic demand stays roughly level. For North America, we see demand holding mostly flat amid continuing tariff and interest rate uncertainty; our key global high horsepower markets should stay robust in 2026. As with our earlier outlook, global power generation revenues are still expected to climb 15%-25%. Customer demand remains extraordinarily strong, especially for data center applications, yet capacity will keep limiting our 2026 growth. Our outlook accounts for capacity brought online in North America at the close of 2025, ongoing international expansion, especially across China and the wider Asia-Pacific region, and rising appetite for lower output generator sets as customers look for answers given persistent capacity limits on larger configurations. Continued customer demand strength keeps supporting our long-term investments aimed at broadening our power generation portfolio and global capacity, as we talked about in May; in mining, engine sales for the year are now seen ranging from down 5% to up 5%, against prior guidance of flat to up 10%. Even though fleet replacement continues to be a tailwind in a number of markets, we anticipate that high inventory levels, along with others, will soften demand for the rest of the year. Turning to aftermarket, given the modest tweak to the guidance we gave previously, our expectation for 2026 is expansion of 3%-8%, helped by fleets getting older and more parts being consumed; to sum up, the second quarter came in strong and we are lifting our outlook for full-year revenue growth to 10%-13% up, while also raising the midpoint of our EBITDA guidance into the 18%-18.5% range. This outlook captures what we expect to be better operating performance during the second half, driven by a stronger North America on highway markets plus sustained high demand in power generation. As we head into the back half of the year, momentum is positive and regulatory clarity has improved; our focus stays on carrying out our strategy, putting capital into long-term growth, and assisting our customers as they succeed in a market that is changing quickly. I'd like to express thanks to our employees and leaders across the globe for what they give to our customers and to one another. Their commitment, collaboration, and emphasis on getting things done keep setting Cummins apart and leave us well placed to serve our customers while building long-term value for our shareholders. I'll hand things over to Mark.

Mark Smith

executive
#4

Thanks, Jen, and good morning to all of you. Our Q2 financial results and other key business moves extended the story we laid out at our recent Analyst Day; during the second quarter we posted record quarterly sales along with record EBITDA dollars and robust operating cash flow, continuing a pattern of lifting our performance cycle after cycle; through share repurchases and cash dividends, we gave back more than $500 million in cash to shareholders. Within the Power Systems business, we won new prime power business here in the U.S. As Jen outlined, we substantially widened our growth opportunities in data center backup power with one of our existing global hyperscaler customers. After weighing our strong Q2 performance and the record demand for Cummins products worldwide, we have lifted the full-year forecast we gave three months ago. In a further signal of confidence, our Board of Directors approved raising our quarterly cash dividend by 10%, marking the 17th consecutive year of dividend growth. Second quarter revenues came in at $9.5 billion, a 9% rise from a year ago. North America sales climbed 8%, while revenues outside the U.S. rose 12%, with China leading the way. EBITDA totaled $1.7 billion, or 17.5%, versus $1.6 billion, or 18.4%, a year ago. Higher global power generation volumes and stronger international construction demand were the main drivers behind the rise in EBITDA dollars. Tariffs had no material net effect on EBITDA dollars during the quarter. Let's walk through each line item in somewhat more detail. Gross margin for the quarter reached $2.5 billion, or 26.1% of sales, up from $2.3 billion, or 26.4%, last year. Higher volumes, greater joint venture earnings, and favorable pricing mainly drove the dollar increase, partly offset by tariffs and a rise in higher incentive compensation tied to our projections for record full-year financial performance this year. Rather than repeat myself multiple times, I'll just point out that the higher incentive compensation affects cost of sales and operating expenses across all of our operating segments. Based on our current forecast, the incentive compensation run rate for the second half of the year should be lower than what we incurred in the second quarter. Selling, administrative, and research expenses came to $1.3 billion, or 13.5% of sales, versus $1.1 billion, or 13.1%, a year ago. The increase stemmed primarily from higher development costs supporting our upcoming on-highway platform launches in North America as well as new mining and natural gas power generation programs. Joint venture income of $154 million rose $36 million from the prior year, mainly on stronger performance in our China joint ventures, which benefited the engine and Power Systems segments. Other income was $32 million versus $49 million from the prior year. Interest expense came in at $80 million, down $7 million from a year ago. The all-in effective tax rate in the second quarter was 25.1%, which included $29 million of unfavorable discrete items, or $0.21 per diluted share. For the quarter, net earnings came to $932 million, which works out to $6.73 per diluted share, versus $890 million, or $6.43 per diluted share, in the same period last year. Operating cash flow reached $1.5 billion — a second-quarter record for us. That's a favorable comparison with $785 million a year earlier, mostly on better working capital. We returned $501 million to shareholders during the quarter, in line with our long-established practice of giving back roughly 50% of operating cash flow. That figure included $225 million of buybacks and $276 million of cash dividends. Now I'll walk through how each segment performed and what we're guiding for full year 2026. Starting with engines: second quarter revenues came in at $3.1 billion, up 6% year over year. EBITDA was 12.5%, down from 13.8% a year ago, since greater R&D and freight expenses were only partly offset by stronger North American medium-duty truck volumes, China construction demand, and better tariff recovery. For 2026, we now see engine revenues rising 9%-14%, an increase from our earlier guide of 7%-12%, mainly on higher expectations for North America heavy and medium-duty trucks; EBITDA should land in the 12.5%-13.25% range, versus prior guidance of 12.5%-13.5%. Turning to components: revenue was $2.9 billion, up 7% from a year ago. EBITDA came to 13.2%, down from 14.7% a year earlier, as higher product coverage costs were partly offset by stronger North American truck volumes, higher China on and off highway volumes, and favorable pricing. For components, we now expect 2026 revenues up 8%-13%, raised from our prior outlook of growth of 7.5% at the midpoint, thanks to stronger truck demand in North America and stronger demand in on and off highway markets in China. EBITDA should be in the 13.5%-14.25% range, compared to our earlier guide of 13.5%-14.5%. In distribution, revenues rose 9% year over year to a record $3.3 billion. EBITDA as a percent of sales fell to 13.6% from 14.6% a year ago, driven by higher incentive compensation and freight expenses, partly offset by greater power generation volumes. We expect 2026 distribution revenues up 9%-14%, in line with our prior guide. EBITDA margins should come in at 13.5%-14.25%, versus previous guidance of 14.25% at the midpoint. Over in Power Systems, revenues hit a record $2.3 billion, up 19%, while EBITDA rose to 22.8%-24.5% of sales, mainly on strong global power generation demand, particularly in the U.S. and China. For 2026, we expect Power Systems revenues to grow 14%-19%, unchanged from three months ago. Additionally, we anticipate EBITDA margins to land between 25% and 25.75%, versus the 25.5% midpoint we guided previously. That reflects ongoing robust results throughout the business, plus higher spending in the back half of the year to back the creation of our new 130 L natural gas generator platform and grow our standing in the expanding prime power market. Accelera's revenues rose 38%, reaching $145 million, on stronger electrified powertrain and electrolyzer sales. EBITDA came in as a $69 million loss, better than the $100 million loss a year earlier, which speaks to the focused cost-cutting steps taken earlier in this segment. For 2026, we now expect Accelera revenues between $350 million and $400 million, up from the $300 million-$350 million we previously guided, and we now project net losses between $260 million and $290 million, versus our earlier guidance of negative $270 million to $300 million. In summary, we've lifted our outlook for the full year and now anticipate total company revenues growing 10% to 13%, with EBITDA between 18% and 18.5%. We expect an effective tax rate of roughly 23% for the full year, barring any discrete items. Capital investments should fall between $1.35 billion and $1.45 billion, since we keep making essential investments to enable future growth. In summary, we turned in a solid quarter, helped by ongoing demand growth for power generation equipment, strengthening North America truck markets, and expansion in China across most end markets, particularly data centers. Because of our employees' excellence and dedication amid what is still a complicated global economic backdrop, we head into the second half with positive momentum, concentrating on helping our customers achieve their growth plans and on further strengthening our already solid financial position. Our robust balance sheet gives us the financial flexibility to put money into the growth opportunities ahead, some of which you've heard more about today, while still deploying capital prudently and returning surplus capital to shareholders. Thank you; now I'll hand things back to Nick.

Nick Arens

executive
#5

Mark, thanks. So that everyone else on the line gets a chance, please keep it to a single question plus one follow-up. Should you have anything further to ask, just get back in the queue. Operator, let's take our first question now.

Jamie Cook

analyst
#6

Morning, everyone. So I have a couple of things to ask. First, with the added visibility we now have regarding EPA 2027, what's your thinking on how 2027 shapes up? At the Analyst Day, as I recall, you were expecting the first half of 2027 to be down. How are you looking at that now — Mark, I suppose, when you consider your back-half earnings, it suggests something like $16 or $17 of earnings power in that period. Is that a reasonable way to frame a base, if you follow me, for 2027? Then my second thing: on distribution margins, I believe you cut them fairly substantially. Could you just walk through what changed in the margin guidance for distribution? Thanks.

Mark Smith

executive
#7

Thank you.

Jennifer Rumsey

executive
#8

Jamie. Clearly, we've lifted our full-year guidance along with our projection for the North American truck sector. Strength during the back half of the year is still what we're anticipating; given the EPA draft rule and the phase transition we've made public, the crucial point is that the endpoint stays the same. The chance for growth in engines and components tied to those new platform launches is unchanged, and in our view the shift will go more smoothly. Although we'd anticipate demand softening somewhat in the coming year, and naturally we won't provide precise guidance today regarding what that figure is, it won't prove as sudden as we previously might have expected, since we'll keep selling the existing product through a portion of next year or, for the B, through the entirety of next year, before ramping the new product; that will ease the transition as a whole and, I believe, genuinely reduce the swings in what demand looks like from one year to the next, with more of it simply shaped by underlying economics.

Mark Smith

executive
#9

Right. Now, regarding your remaining questions, Jamie. Yeah, nothing non-routine occurred at any point during the back half of the year. For that same period, we anticipate a robust EBITDA percentage, rising compared to the first six months and higher than the prior-year figure in both Q3 and Q4. That added amount in the forecast related to incentive compensation, yes, it introduced some noise into what we reported for the second quarter, though it should decline as we move through the back half. What's really happening is significant top-line growth alongside margin improvement on an underlying basis, and with luck, as you will observe, on a reported basis during the latter six months. With distribution, essentially two dynamics are at play — perhaps one dynamic that isn't occurring and another that is — specifically, the composition of that business is fairly stable. Clearly there's considerable momentum in how they're carrying out the rollout of numerous sizable power generation agreements. The parts side isn't expanding at an equivalent pace. Likely, that's the area requiring a meaningful increase in margin percentage, most likely. Another element is that since we raised our projection for overall company profitability, higher incentive compensation comes with it, which sadly hits distribution harder than proportionally since it's more of a people-driven operation; that's simply an unavoidable result. Looking ahead as a baseline, once we enter the next year, we'll reset our plans to target. At present, our incentive plan sits above target for this year given the record results, and that will be reset as we head into next year. That ought to serve as something of a tailwind, most likely. What about demand? Can't say yet. Per Jen, our strongest assumption is reduced volatility compared to what we'd have envisioned, at least during the opening six months, for North American highway. Without a doubt, we have solid backing in power generation, chiefly from standby diesel serving data centers, and as you can tell, that keeps expanding. No major shifts are apparent right now, though that's quite an preliminary take on what lies ahead. Hopefully that was useful. Nothing is changing in any major way. The distribution business, yes, might approach 10% earnings growth this year, and on an underlying basis, we foresee considerable expansion there plus margin improvement moving forward.

Steve Volkmann

analyst
#10

Hello there. Sorry about that. Morning to you. Mark, may I build on that point just a bit more? Roughly speaking, what would the incentive compensation reset come to — in dollars, I suppose, I'm not sure — so we can get a sense of how that solid guidance might shape up for next year.

Mark Smith

executive
#11

For next year, it might land somewhere around $200 million.

Steve Volkmann

analyst
#12

Great. Alright, thank you.

Mark Smith

executive
#13

Let me just add something so things are clearer, since clearly that has caused some—I'd call it confusion rather than distortion, though that isn't quite the right term—but we needed to add to it during the second quarter; as for the second half, Q3 and Q4 will each come in roughly $25 million per quarter below what Q2 cost.

Steve Volkmann

analyst
#14

Understood. All right, thank you. May I inquire about PowerGen? It catches my attention that the goal you've set is a 15%-25% increase, since from what I gather, you're somewhat limited by capacity in that area. What's the reason for such a wide span in that objective? What would truly be able to shift it from the low end to the high end of that span?

Jennifer Rumsey

executive
#15

Thank you, Steve. Our guidance, as you can see, remained unchanged during this quarter compared with what we discussed in the prior quarter. The main support for it comes from additional capacity, that capital we put in, and specifically the 95 L that we finished last year, plus rising demand in China from our operations in China for our product in China and Southeast Asia. As I mentioned in my comments, given the capacity limits on the large gensets, we observe certain customers purchasing some of the smaller gensets. That pattern has essentially remained consistent over the last three months with what we witnessed before. There's still a bit of spread within that, but it truly hinges on that. I believe the large gensets will essentially be maxed out, and then the extent to which we see sales of some of the smaller product will determine that fluctuation.

Mark Smith

executive
#16

Honestly, I'd say a 10% swing between now and then doesn't look likely. The real upside shock, I think, has been how quickly China has sped up. North America demand was already something we counted on, and China has genuinely gained momentum too. Any additional units our incredible Power Systems supply chain group manages to wring out, we can most likely sell during this year and definitely going into next year.

Jerry Revich

analyst
#17

Yes. Hi. Good morning, everyone. I'm curious whether we might discuss how, in light of the fact that Power Systems has ramped performance ahead of plan during this year, you're viewing how much additional delivery ramp the team can achieve in 2027 compared with 2026? Is a growth rate of this team's kind sustainable while the supply base keeps ramping? Any fresh perspective on the cadence would be useful.

Jennifer Rumsey

executive
#18

Yeah. Right now, what we see for cadence is essentially identical to what Jenny described at the May analyst day, when we of course announced the extra capacity investment, 20 GW of additional capacity spread across essentially every one of our plants and throughout our supply chain. A portion of that will come online during next year. We would anticipate a certain step-up, and then the larger step-up will occur in 2028, phasing in further all the way through 2030. Keep in mind that such capacity is quite flexible regarding engine size, genset size, and the application for engines across industrial markets and PowerGen markets, including natural gas prime demand. As you heard, we truly are beginning to witness some prime demand for the products we currently offer, even as we work on developing the new 130 L. That will expand somewhat, yet diesel standby will remain the predominant PowerGen revenue source this decade.

Jerry Revich

analyst
#19

That's great. Can we talk about something else? On the engine side, the outlook assumes 14% type margins in Q4. You folks have managed previous engine changeovers pretty well, moving from one product to the next. What do you see ahead for 2027? How tough is the transition you're working through right now, with some new products coming and some older ones going away? And how should we think about what that does to operations across 2027?

Jennifer Rumsey

executive
#20

Of course, building different products is normal for our plants; what's new for us is having this longer, limited-production transition. Thanks to the draft rule and the flexibility it provides — and based on everything we've been hearing from the EPA, we believe it will stay that way — it genuinely helps both us and the broader industry get through that period of constrained output as we move from the old product to the new one. Next year we'll continue offering the current product, we expect demand for it to hold up pretty well, and then we'll scale up. The Forever Rising Tour has been on the road, we've been running field tests, and customers have been getting a look at the new HELM platform launches. Last week I met with some customers, and they’re genuinely enthusiastic about the chance to begin purchasing early in the year, gain confidence, and shift in a more gradual fashion from the existing offering to the new one. I believe this will work in our favor, and it will allow us to build both confidence and capability with that new offering across the various OEMs and end customers we serve.

Steven Fisher

analyst
#21

Thank you. Morning, everyone. Turning to the power segment, the incremental margins appear to exceed the 25%-30% guidance you previously mentioned. I'm wondering what's catching you off guard there? It seems like the second half is implied to be even stronger than that. Any details would be useful.

Mark Smith

executive
#22

I believe the primary driver has likely been increased demand in China, which benefits us on the JV earnings front. On the whole, it's not a major shock. It comes down to efficiency throughout the ramp-up and how effectively we collaborate with the supply chain, the pricing structure. I'd say overall, things are progressing well there. There will be an increase in engineering. It's not unusual, but as we introduce more new platforms to the market, that's going to play a role. Definitely, we anticipate the robust gross margin results will keep going.

Steven Fisher

analyst
#23

All right. To build on what was asked earlier, perhaps. Regarding the switch in engines coming in 2027, I'm wondering how much consideration you've given to the possibility of a pre-buy happening that year too, among those who could be somewhat more wary about the technology, plus there are still elevated costs. Do you believe the gradual increase in production will assist in reducing some of the potential appetite for a pre-buy related to the technology? Do you think a pre-buy could still occur in 2027 going into 2028?

Jennifer Rumsey

executive
#24

I believe it truly makes that possible, simply a more seamless transition overall. Our industry is emerging from a low point in the cycle. Basics are getting better, and I'd call it optimism with caution. The fleet is getting older. We're beginning to observe customers, and simply the core economics are enabling them to purchase, and that is bolstering demand. A certain amount of pre-buy is showing up, and my expectation is that this would carry on through the coming year. I'd view it as simply more even from one year to the next, compared with, were we to look back one or two years, what we would have expected.

Steven Fisher

analyst
#25

Thanks.

Angel Castillo

analyst
#26

Hello, good morning, and thank you for taking my question. I just wanted to follow up on the EPA 2027 dynamics. You said that, on the whole, the way the curve looks and demand probably turns out somewhat more favorable for you. I'm wondering whether we could get a bit more financial specificity around that — specifically, how it affects your ability to set prices on the new engine as you introduce it or bring it in gradually. What about cost implications as we consider this newer, more layered strategy or gradual ramp-up? How does that translate for margins compared with what you previously expected? And finally on that point, what about market share implications? I'm not sure whether competitors are able to utilize credits or whether there are other dynamics you'd anticipate.

Mark Smith

executive
#27

On economics, I'd say we're still working through pricing in its entirety. What we stated at Analyst Day regarding the new products — what we stated at Analyst Day — is that the biggest source of the added value and price of the trucks, as the industry sees it, will be the powertrain. That remains our belief. When we introduce new products that carry new value, we anticipate being properly compensated. As for existing products, clearly as we head into next year — and I'd have been surprised if I hadn't already been asked about this — there will be NCPs, or non-conforming penalties. Those, we anticipate passing along to the market. We don't anticipate a meaningful financial hit from them. Yeah, those are what I'd point to broadly when it comes to the economics based on what we know right now. The advantage of this staged or staggered transition, I think, is clearly that we get to trial those products for a longer period. Yeah, it ought to be better for the industry as a whole. Naturally, one consequence of staggering is that our R&D costs will remain elevated somewhat longer. Again, it won't be hundreds of millions of dollars beyond the current rate. We're already spending somewhat more. Our product coverage costs next year would be less than what we'd have expected had the full launch happened on January 1. There are quite a few moving parts, but I've attempted to address all of them.

Angel Castillo

analyst
#28

That makes sense, and it's a big help. I'm just wondering about the diesel or backup power backlog — can you share anything about how that backlog is shaped, how much it might be rising quarter over quarter or compared with a year ago in the quarter, and whatever detail you can offer on regional demand plus the underlying backup you're seeing for that product?

Jennifer Rumsey

executive
#29

Honestly, this remains a market with strong demand that is constrained by capacity. You've heard about the momentum in the U.S., China, and Southeast Asia. That's still the case. I'd simply note that not long ago we held a summit with customers and leaders from throughout the Americas focused on power generation, and what they told us stays very much the same: keep adding capacity, because appetite for backup power outpaces what the industry can supply, and they want to know how much more we can get them. Our backlog is quite robust. We have a lot of confidence in the capacity investments we're currently making, and we're under pressure to move faster where possible.

Kyle Menges

analyst
#30

Thank you. I simply wanted to ask a bit more about what Angel brought up in the previous question. For the 95 L right now, I'm interested in how far ahead you're taking orders. And a competitor of yours mentioned earlier today that wait times for diesel gensets are getting longer, so I'd like to know whether you're experiencing that too.

Mark Smith

executive
#31

Well, the way I see it, demand keeps rising — that's the key point. As a broad comment on demand, we're currently sold out further into the back half of 2028. There has been zero sign of demand pausing or wavering, absolutely none. You've already heard the announcements involving one large customer, and I'd describe the overall demand direction as still increasing rather than flattening out. So yes, anyone wanting a new one will have to wait until the second half of 2028.

Kyle Menges

analyst
#32

That helps. So, are there any actual pricing shifts when you're inking new contracts? Pretty much in line with the rates you've already been implementing in deals up to now?

Mark Smith

executive
#33

What Jenny told you, I believe, reflects a plain expectation: as we expand, our margin results will climb gradually. Several things feed into that — bringing production on board, getting fair compensation for the technology we deliver, and ideally growth in parts from industrial applications. Each of those plays a part. We obviously aim to keep pushing margins upward. The Power Systems team has given us genuinely solid momentum; that sums up my view. Once more, I'd simply point out that few competitors in this space can offer not only the goods, but also the service and installation worldwide. Demand is high. Yep.

David Raso

analyst
#34

Hello, and thanks. I have a couple of quick questions. Looking at 2027, I'd like to hear what you think about the North American truck market — specifically, what's the appetite? Are you seeing that customers would rather purchase the 200 mg full penalty engine, meaning no technology change but they pay the penalty? Or would they choose a lower milligram that remains non-compliant, yet credits can be applied to offset it, so the price doesn't go up? I'm simply attempting to gauge how much customers want new technology at a reduced price, versus preferring to keep the existing technology, pay the penalty, and avoid worrying about a technology shift. My second question: can you assist us regarding PowerGen for next year — the capacity level compared with this year, so we can get a feel for volume? I realize mix matters a great deal in that question; I just want a bit of insight into the capacity you believe you'll have next year compared with this year for PowerGen receipts. Thanks.

Jennifer Rumsey

executive
#35

I'll begin, and then I'll let Mark add to that. David, I appreciate the question. I'd offer a slight caution: we anticipate that NCPs and that regulatory flexibility will remain in the final rule; what we have is a proposed rule, and certain specifics of how it will function will shift. The way you characterized what might occur regarding product availability, credit offsets — all of that might not be precisely right. At the core, though, what I'd say is that customers have interest in both. They're quite enthusiastic about continuing to purchase the current products we offer and extending those into next year. They're eager to begin purchasing the new product and to gain additional experience with it; at present we're working with our various OEMs on their plans and on what will be available, and which truck models at which point in time. Multiple moving parts will shape how this unfolds. At the core, we're discussing with OEMs what they're looking for from current product, new product, what gets sold into the market, and the end customers we speak with. My expectation is that at first they'll purchase more of the current offering, but they want both. They also want to start ramping into the new product.

Mark Smith

executive
#36

Basically, I doubt that much of the discussion at the individual level amounts to people saying, "I'd like one of those," or, "I'd like one of those," correct? In the end, what the industry is doing is shifting toward the new products. This is happening across a longer stretch of time and in a way that we have not witnessed during earlier cycles. It's more or less unheard of, at least across the past 15 years, that, whatever the causes may be, the rules are getting completed so near to when they actually take effect. What's really happening, I believe, isn't a calculation done per engine. In the end, every one of us, the whole industry, and not only Cummins, has to make the move to the new product. Along the way, it's going to be an intriguing set of developments.

David Raso

analyst
#37

Regarding the question about PowerGen capacity.

Mark Smith

executive
#38

That's something we'll probably hold off on addressing until a bit later in the year. At this point we're going into too many levels of guidance. Yes, it's going to be high.

Tim Thein

analyst
#39

Thanks. Morning. I'll try to combine these two. First one concerns the engine segment. I'm wondering whether you could speak to what the outlook looks like for parts demand across North America — and once more, specifically the on-highway portion. If I'm reading things right, it seems the guidance was lifted only slightly, so I'm curious whether, broadly speaking, with freight markets healthier and customers stronger, you're noticing any pull-through into parts. Second thing relates to China's data center market, which has received plenty of attention. From a visibility perspective, I'd like to know how it stacks up. You've discussed North America at length — do you enjoy a comparable degree of visibility there in China and emerging markets, or not? Naturally, that carries implications for the Chongqing joint venture, whose importance keeps growing. Those are my two, I suppose. Thanks.

Jennifer Rumsey

executive
#40

Yes. Regarding parts, the market is rising. Like you mentioned, we nudged up the low end of the guidance slightly. We're observing a bit of strengthening in parts as the fleet ages and the economics get somewhat better. It hasn't shifted fundamentally versus what we described a quarter ago, though it's certainly improved this year relative to last year. Much like North America, we have strategic customers throughout China and Southeast Asia, and we hold discussions with them regarding multi-year plans and the demand they foresee. I'd characterize those discussions as quite comparable. We sit down with them, and they ask, "More than when we last spoke, please — how fast can you deliver?" That pattern holds fairly steadily across both of those customer groups.

Mark Smith

executive
#41

Core large customers in each market and a broader market participation with others.

Rob Wertheimer

analyst
#42

Thank you. Hi, Mark, you brought this up before regarding the NCPs and EPA 2027. Just so I have it straight — when a rival holds credits, they're able to keep from handing along that expense, right? Do you see any trouble for us in passing it along, or any effect on margin that could come about because of that in the coming year?

Jennifer Rumsey

executive
#43

The way credits ultimately function is still unclear. That said, as a rule, credits alone won't offset NCPs. I should set you straight on that point regarding what we expect.

Rob Wertheimer

analyst
#44

That isn't something unique to Cummins.

Jennifer Rumsey

executive
#45

Naturally, regarding what each company intends to do with NCPs and credit usage and everything along those lines, we're not in a position to say. However, our expectation is that credits won't be drawn on heavily in order to offset NCPs.

Rob Wertheimer

analyst
#46

Great, thanks for that.

Kristen Owen

analyst
#47

Hello, good morning, and thanks for taking the question. I have two quick items for you. First off, I realize it's likely tough to separate out what's true underlying demand versus pre-buy, given all the changes. Still, I'd like to dig into the underlying demand a bit, since the economics do appear to be getting better on tighter supply, and not really because of higher freight volumes. So I'm curious how you view underlying replacement demand apart from the EPA transition, and then I'll ask a follow-up.

Jennifer Rumsey

executive
#48

Yes, much of what we're seeing at the moment is that underlying demand and replacement are getting better. Some pre-buy is taking place; certainly the fundamentals have gotten better, and that has pushed underlying demand higher, and the uncertainty that lingered really until last month regarding regulations and every detail tied to them has also made people hesitant about pre-buy. We're seeing a bit in the second half, and I'd characterize it as driven more by general market improvement.

Kristen Owen

analyst
#49

All right. I'm simply attempting to reconcile that with the higher pre-buy expectation in the guidance you gave for medium duty. Perhaps I can pick this up with you afterward offline. For my second question, because we've already gone over NCPs fairly thoroughly, I wanted to ask about warranty accruals. From a pricing perspective, that was clearly favorable for the buyer, so how are you viewing warranty accruals as we begin putting together this bridge in 2027, and how will that affect your incremental margins given the more measured pace of production?

Mark Smith

executive
#50

Usually, when a new platform is launched — and we'll be launching a number of them between 2027 and 2028 — a higher warranty accrual comes along with it, and then we make adjustments to that as time passes and we gain actual field experience. Right now our warranty costs are running in the low 2% of sales range throughout the whole company, essentially at historical lows, even with what I'd describe as historical complexity in the products. As we get a greater mix of new products in North America, we'd expect that figure to rise. Historically, over time, those costs either haven't turned out to be quite as high as expected or we've simply taken care of any field issues along the way; that's just a normal aspect of launching new products. Compared with what we might have believed six months ago, I'd say next year's warranty costs will be more like this year's for the first half of the year, possibly a slight tick up for the limited launches, and then we'll shift to a higher rate as we get further into the fuller launches in fourth quarter and into 2028. If we're concentrating just on that, naturally, on the new products, we've got more value, more content, and there's also a scaling and efficiency factor to some degree on certain components as we proceed. Broadly speaking, the first nine months, if we simply assume equal demand, are going to look more comparable to how we're performing now, and then it'll begin to change for a brief period and then get better again over time. That would be the aim.

Jennifer Rumsey

executive
#51

Even so, that longer run of limited output is going to let us catch whatever problems show up right away and fix them while production begins to climb. Looking further out, that ought to be a plus when it comes to quality.

Nick Arens

executive
#52

Appreciate it. That wraps up today's teleconference. Thanks to everyone for joining and for your ongoing interest in Cummins. The investor relations team, as usual, will be around to take questions following the call.

Operator

operator
#53

That brings us to the end of the call for today. At this point, feel free to hang up your phones. We appreciate you taking part.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Cummins Inc. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.

Get the API View API docs →

This call discussed

For developers and AI pipelines

Programmatic access to Cummins Inc. earnings transcripts and 132,000+ others is available through the EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments, full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.

More tools for stock research

OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in Cummins Inc. or any ticker on your watchlist.

StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.