NETGEAR, Inc. (NTGR) Earnings Call Transcript & Summary
November 4, 2026
Earnings Call Speaker Segments
Executive
executiveThanks, operator. Good afternoon, everyone, and welcome to NETGEAR's conference call covering financial results for the third quarter of 2026. With us from the company are CJ Prober, CEO, and Bryan Murray, CFO. As for how the call will run: CJ will begin with commentary on the business, and Bryan will then review the third quarter financials along with guidance for the fourth quarter. After that, we'll open things up for any questions. If you haven't gotten a copy of today's release, it's available on NETGEAR's Investor Relations website at www.netgear.com. Before we get into the formal remarks, we want to advise you that forward-looking statements are included in today's conference call. This call will touch on forward-looking items like projected revenue, gross and operating margins, expenses, tax expense, and how the business is expected to perform going forward. Those statements describe possibilities, and real outcomes or trends might end up substantially different from them. For details, please see the risk factors covered in NETGEAR's periodic SEC filings, among them the latest Form 10-Q. Everything forward-looking we say today rests on assumptions held as of now, and unless the law demands otherwise, NETGEAR assumes no duty to revise these statements because of fresh information or later developments. Also, we'll be referencing a number of non-GAAP financial measures during this call. You can find a reconciliation between non-GAAP and GAAP figures in today's press release and on our Investor Relations website. With that, I'd like to hand things over now to CJ.
Charles Prober
executiveThanks, Steven, and I appreciate everyone being here today. Q3 was a significant stretch for NETGEAR as we keep pushing our shift into a business led by the enterprise, differentiated by software; we're enthusiastic about the momentum and demand we're witnessing in enterprise, especially across our managed switch lineup and our expanding software and services offerings. That said, our favorable momentum during this year's second half has been affected by ongoing execution problems at a key manufacturing partner of ours. Crucially, this does not reflect customer demand, which stays strong, but instead reflects our capacity to fulfill customer orders promptly. Resolving these manufacturing problems ranks as my top operational priority. Even with these supply limitations, we achieved revenue inside our guidance range and non-GAAP operating income that was positive and above the upper end of our guidance range, which shows the inherent profitability of our enterprise business and our sustained financial discipline. Our non-GAAP EPS came in at $0.13. Today, I'll cover the momentum building within our enterprise business, the steps we're taking to resolve the manufacturing bottleneck, and how we're continuing to position NETGEAR for sustainable, profitable growth via our enterprise-led transformation. I'll also mention the ongoing transformation of our consumer business, and Bryan will then go through our financial results and fourth quarter outlook in more detail. Enterprise brought in about $90.7 million in revenue, which represented 54% of consolidated revenue and roughly 70% of non-GAAP gross profit. Worldwide end customer sell-through increased approximately 6% year-over-year, powered by strong double-digit growth in our managed switch products, with trends even more favorable in the Americas and Europe. At the same time, our reported revenue growth was flat year-over-year, a result of missed production commitments from our manufacturing partner along with our ongoing APAC transformation. Enterprise backlog when Q3 ended was more than 2.5x higher than at the close of Q2, which was already elevated due to product shortages in the earlier quarter as well. Enterprise non-GAAP gross margin came in at 53.2%, up 220 basis points from a year earlier, while contribution margin stood at 24.5%. Both figures were lower quarter over quarter, which reflected regional mix, heavier use of airfreight to secure supply, and the investments we had planned in the enterprise business, yet they still demonstrate the attractive economics of our growing enterprise portfolio and how significant the shift toward enterprise across NETGEAR has become. I'd now like to walk through what caused our supply chain difficulty and the steps we're taking to resolve it. As we noted last quarter, one key manufacturing partner delivered less than expected in Q2, and that held back growth and left a bigger backlog for the quarter. The problem came from a factory move that our partner handled badly. We received assurances from the executive team, including that partner's CEO, that the production slowdown they were experiencing would only last a short while. This partner has been with NETGEAR for many years and over the past 20-plus years has built a solid record of honoring its commitments. From what we observed while working side by side with their team in the field, it looked like they would be able to reverse the situation within Q3. They pledged to hit our minimum Q3 production volumes, but again they failed to satisfy those minimum requirements. Based on what we've heard from others using this same partner, it's clear that comparable problems are affecting additional companies too. This isn't an issue unique to NETGEAR. It also isn't about whether components can be obtained. We moved early to lock in the essential materials our production plans depend on. What has been difficult, rather, is converting those materials into completed products as quickly as anticipated once our partners relocated to a new factory. Plainly put, this manufacturing problem can't be tolerated, and resolving it ranks first among my operational priorities. Our NETGEAR team members remain at the facility working with our partners to diagnose output constraints in production and to give priority to the items our customers need most urgently. In parallel, we are negotiating appropriate commercial remedies and shifting selected products to alternative manufacturing partners whose execution has been more dependable. The partners' remediation plan encourages us, and early indicators of improvement are emerging, yet we anticipate that one more quarter will be required before supply returns to normal, and our fourth quarter outlook incorporates that recovery schedule. We expect that normal production levels with this partner will be reestablished in the first quarter of 2027. Regarding our enterprise transformation, we continue to feel good about the power of our portfolio, the strong demand coming from customers, our expanding backlog and the strategic opportunity we see over the long term. We stay focused on creating a distinctive enterprise networking operation that combines high-performance hardware with software that stands apart, including AI-powered experiences that make workflows, deployments, network management and security simpler for our customers. By investing in our own software engineering, we are accelerating innovation, tightening our grip on the road map and opening up more room for non-device revenue at higher margins. Within Pro AV, we have broadened our market-leading offerings through the award-winning Align platform, which we announced at InfoComm and brought to market in Q3. Align represents our first AV hardware platform that brings AV services together, which makes our IP-based solutions more valuable still to end customers. The response to this product has been fantastic, and our first quantities sold out fast. Align is a live platform where we can keep expanding the software and services offered over time; we've launched an initial wave of first-party and third-party software solutions on Align, and more than 70 AV ecosystem partners are in the pipeline wanting to add their software to the Align App Store, which shows the value of our platform in the AV ecosystem. Taking a step back, our ecosystem of Pro AV partners continues to grow — we added over 25 new partners in the quarter, which puts us at more than 625 total as of quarter's end. A good number of these new partnerships are aimed at speeding up our push into the broadcast vertical. Speaking of which, sell-through for our Sentia-enabled switches was more than double what it was a year ago. More broadly, we continue to support end-customer deployments that are critical to operations, and today we're supplying AV power to a top AI frontier lab, to NATO, to several key U.S. federal agencies, to the Olympics, and to major churches and museums around the world. We have also just rolled out our solution to run the entire entertainment system aboard our second Norwegian cruise line vessel; when it comes to enterprise networking and security, the transformation bet we made is starting to gain traction. Looking at products, we have overhauled our cloud management platform, Insight, and partners and customers have responded well to it. Thanks to that transformation, we were able to start an Insight price increase, which contributed to Insight billings doubling year-over-year in this quarter. We are additionally using AI to make network design, deployment, management and security simpler still, and we are beta testing those experiences with end customers right now. We have also just introduced our PR30 router, which delivers security built into networking — something that matters more and more given the elevated security vulnerabilities in today's environment. On the go-to-market side, our new partner program is drawing strong engagement. Active partners rose 14% sequentially in Q3, and Apex partners climbed to 31% over Q2.
Charles Prober
executiveOur presence in enterprise networks continues to expand, and during Q3 we carried out installations at a sizable industrial plant in Poland, a large national convention center located in Africa, a major department of the U.S. government, a European hospital account we won, and a leading worldwide maker of semiconductor equipment. Across India we completed a variety of deployments, among them the Maharashtra Public Service Commission and the Brooklyn Resort. The most significant development is that the improvements we've achieved in our products and how we bring them to market have finally set our enterprise networking and security business on a path to growth in the Americas — something that hasn't happened in a number of years. That's a meaningful milestone and an appealing expanding opportunity, though we are still at a very early stage in developing this business and seizing the market potential. Similarly, the transformation in APAC is gaining traction; sell-through there is lower than a year ago, but as we expected, we're posting double-digit growth on a sequential basis, which means recovery in the region is proceeding as planned. Within our enterprise business, we keep passing along the rising expense of components, which gives us pricing leverage in this segment. In the quarter, we announced a price hike of roughly 10% more across our managed switch lineup, along with smaller increases on other products, and those go into effect in November. Our enterprise long-term thesis is still solid and proceeding as planned. Momentum keeps building, demand from customers is robust, and we're on pace for the medium- and long-term goals we laid out at Investor Day last year; on the Consumer side, our near-term priority is safeguarding gross profit and keeping expenses under tight control while preserving the strength of our brands and continuing to innovate for the future. Quarterly revenue declined compared with a year earlier. That reflects a deliberate pullback in our legacy service provider segment, supply shortfalls caused by missed production commitments at our manufacturing partner, and our effort to run this business for better gross profit. The same partner whose manufacturing issues are constraining enterprise supply also produces part of our consumer wireless router lineup. Even with the revenue drop, consumer non-GAAP gross margin and operating margin were both roughly unchanged from the prior quarter, and the contribution profit amounted to only a $1.4 million loss. That shows how sharply the team is focused on improving the bottom line for this business. Even though this approach leads to slower revenue growth on paper, it frees us up to direct resources toward the stronger parts of our consumer portfolio—namely our core retail networking products and the recurring services that carry higher margins. Those recurring services posted double-digit growth for the quarter, even with the deliberate limits we placed on unit volume. During Q3, we carried out a restructuring aimed at cutting spending in this business; it affected roughly 8% of employees and led us to shut down our office in Canada, where the team concentrates on our consumer service provider products. The roughly $6 million in yearly savings from this restructuring won't show up in our P&L until 2027, because of when the exits and office closure occur; we're also putting in place a series of price increases that take hold in January to further offset the added supply cost. Our consumer business, we believe, still holds value, backed by our established brands, broad product portfolio, long-standing customer relationships and positive U.S. regulatory tailwinds; we keep watching developments in the U.S. regulatory environment that could favorably shape the competitive landscape for consumer networking products. To reiterate what we've mentioned previously, the FCC's changing specifications for networking gear might create openings for trusted American firms like NETGEAR, particularly with the industry advancing toward upcoming generations of networking technology, and we are strongly positioned if that materializes. Looking more broadly, Q3 increased our confidence in the fundamental enterprise opportunity while simultaneously highlighting the supply chain difficulties that prevent us from completely seizing that rising demand; we keep making headway in constructing a more differentiated business via our expanding software capabilities, growing service offerings and leadership in Pro AV. Even so, we acknowledge that these strategic gains must also convert into steadier revenue growth and financial performance, and we are implementing the steps that will achieve this. A strong Q3 non-GAAP operating profit that also exceeded the top of our guidance range shows the transformation is continuing to make progress. We're still dedicated to the strategic course and to the medium- and long-term financial goals we laid out at our Investor Day. Our priority is keeping financial discipline in place and choosing actions that put NETGEAR in position for sustainable, profitable growth and for creating long-term shareholder value; on that note, I'll hand the call to Bryan, who will walk through our financial results and the fourth quarter outlook.
Bryan Murray
executiveThanks, CJ, and good afternoon, everyone. Our Q3 results reflect a number of dynamics. Underneath our enterprise solution, demand remains quite strong, especially for our Pro AV managed switch products. Persistent manufacturing constraints limited how fully we could convert that demand into reported revenue, and this hit the enterprise business harder, though it was also a contributing factor for consumer; we delivered favorable gross margin performance and ongoing expense discipline, and that let us post non-GAAP operating profitability above what we had expected — a reflection of the work behind our transformation strategy. Revenue for the third quarter of 2026 was $167.3 million, down 9.3% year-over-year and roughly flat sequentially. That figure landed within the $165 million to $175 million range we had guided to, but it came in under the midpoint as a result of supply problems encountered with our manufacturing partner. Enterprise revenue reached $90.7 million, up 2% sequentially and basically level compared with a year earlier. It's important to note that these revenue figures don't completely capture underlying customer demand, since we dealt with supply constraints on our Pro AV managed switch products; that was the main reason our backlog expanded to over 2.5x the balance at the close of the prior quarter, which had already been at an elevated level. Enterprise point-of-sale activity climbed roughly 6% year-over-year, with growth of about 10% in the Americas and 4% in Europe. We continued to see especially strong demand for our managed switches, which kept expanding at a double-digit rate even with the effects of supply delays. As CJ explained, the difficulties have centered on manufacturing throughput and on having enough product on hand to fill customer orders—specifically for our Pro AV managed switch products in our enterprise business and for certain routers in our consumer business—rather than on any widespread component shortage. Those same constraints also played a part in a sequential decline of $5.5 million in our ending inventory, even though procured components rose by roughly $24 million, and they held back our capacity to rebuild channel inventory. We're still collaborating with our manufacturing partner to boost production output, but shipment timing and mix stay significant factors in our near-term revenue forecast, and I'll discuss that more in a bit. Moving to Consumer: third quarter revenue came in at $76.6 million, a decline of 18.2% year-over-year and 3.7% sequentially. This business keeps facing a tough environment marked by fierce price competition even as component costs climb. We're still benefiting from share gains in the U.S. cable category as our former competitor reduces its channel presence, yet the service provider and related product portfolio fell roughly 23% year-over-year as we reap profits from these lower priority businesses. For this segment, we're still centered on safeguarding gross profit and running things with financial rigor. As we head into 2027, we anticipate these pressures will stay substantial, especially as elevated memory and other component expenses work their way through. Turning to recurring services: annual recurring revenue reached $42.5 million in Q3, which is up about 12% versus a year ago and 2% quarter over quarter. Growth in this area was constrained during the quarter because we finished a technical platform migration, and that migration will strengthen how we market and sell our services over the long term. For a substantial portion of that period, the migration curtailed our ability to deliver these services via our direct-to-consumer site — the channel where our conversion rate tends to be strongest. Even so, the long-run advantages the new platform delivers make that trade-off clearly worthwhile. I'd also point out that our non-device revenue initiatives in the enterprise segment are progressing quite well, and the successful launch of our new Insight solution continues to draw favorable feedback. We're genuinely encouraged by how billings for this service have grown, reaching nearly double their level in the prior quarter, though from a comparatively small base. Our recurring services business — small but growing — plays an expanding role in advancing NETGEAR's transformation: it provides attractive higher-margin revenue streams, deepens customer relationships, and strengthens our competitive differentiation. As we extend our software and service offerings, we see meaningful opportunities to grow recurring revenue, make revenue more predictable, and generate greater operating leverage together with improved profitability as the business scales. Beginning now, whenever I discuss profitability I'll be referring to non-GAAP results unless I state otherwise. Today's earnings release includes reconciliations between GAAP and non-GAAP results. Consolidated non-GAAP gross margin was 41.3%, about flat with the prior quarter and 170 basis points higher than the 39.6% posted in the same quarter last year. That year-over-year improvement reflects the rising contribution from our higher-margin enterprise business, including the structural advantages of the operating system license we acquired late last year. We had anticipated spending more on airfreight to bring in supply scheduled to ramp in the back half of the quarter. Production delays meant that didn't occur, however. The team responded and managed to deliver revenues within our guidance range by drawing on inventory we held, which also delivered the added benefit of somewhat lower component costs. Now examining our segments individually: Enterprise non-GAAP gross margin was 53.2%, versus 51% a year earlier and 54.1% in the second quarter. That's an increase of roughly 220 basis points year over year, reflecting both the continued durability of our managed switch lineup and the benefits we're seeing from software-focused efforts. In dollar terms, gross profit for this business hit an all-time high, slightly surpassing the prior record from last quarter. Enterprise contribution margin was approximately 24.5%, demonstrating the strong profitability of this business even as manufacturing constraints limited revenue growth. Consumer non-GAAP gross margin was 27.2%. That's down 120 basis points from a year ago and essentially unchanged from the prior quarter, reflecting the competitive pricing pressure that continues and rising costs for components. Our mitigation work has soaked up part of that pressure, but we expect higher memory costs to keep dragging on consumer profitability over the coming quarters, and early in 2027 we intend to lift prices on select product categories. In Q3, the consumer business recorded a contribution loss of roughly $1.4 million, which underscores why we remain focused on lifting gross profit and holding expenses in check. Non-GAAP operating expenses for Q3 came in at about $65.7 million — a 5% decline versus a year ago and essentially flat sequentially. That reflects our continued tight control over spending even as we invest in strategic priorities: enterprise software development, product innovation, and go-to-market capabilities. The figure came in under our initial expectation, largely because of the timing of new hires tied to the enterprise business transformation now underway. Non-GAAP operating income was $3.3 million, equal to a 2% non-GAAP operating margin. Even with component costs climbing and creating growing headwinds—mainly in the consumer segment—this marks our fifth straight quarter of non-GAAP profitability, beating our guidance range of negative 3% to breakeven, helped by gross margin results above our expectations and disciplined operating expenses. Non-GAAP tax expense was about $800,000 for the third quarter of 2026. Turning to the bottom line for Q3, non-GAAP net income came to roughly $3.7 million, or $0.13 in non-GAAP diluted earnings per share. Cash used in operations for the quarter totaled $3.8 million, bringing cash provided by operations over the trailing 12 months to $7.2 million. Looking ahead, we expect a range of approximately $155 million to $175 million, which includes about $61.7 million.
Bryan Murray
executiveDuring the quarter, we spent $1.4 million on property and equipment purchases, which brings total cash used for capital expenditures across the trailing 12 months to $12.6 million. Moving to the balance sheet: we closed the third quarter with $242.1 million in cash and short-term investments, versus $267.9 million at the close of the second quarter. That sequential decrease mainly came from $15 million of stock repurchases at a weighted average price of $21.86 per share, along with working capital changes. Working capital is still feeling the effects of the manufacturing disruption. Finished goods inventory came down because production constraints limited replenishment, while raw materials and inventory rose as we proactively locked in critical components — especially memory — to support our manufacturing plans. This distinction matters. We've put money into component availability, but converting those materials into finished product is still limited by manufacturing execution at one of our manufacturing partners. Overall, although third quarter revenue was held back by the manufacturing challenge we've discussed, we're encouraged by continued strength in underlying enterprise demand and by our ability to deliver non-GAAP operating profitability above our guidance range. That reflects improving economics in our enterprise business, the benefits of our ongoing transformation, and continued expense discipline. Our priorities are unchanged: restoring product availability, driving profitable growth in enterprise, and managing consumer with a continued focus on gross profit and contribution margin. We remain confident in our long-term strategy while recognizing that the near-term operating environment brings challenges requiring continued focus and discipline. With that, I'll move to our outlook for the fourth quarter of 2026. Within enterprise, underlying demand continues to look encouraging, particularly for our Pro AV managed switches; however, our near-term revenue outlook is still constrained by manufacturing output and the timing of product availability, which we expect to persist into the first quarter of 2027. Our guidance reflects the uncertainty around production execution improvements and that output will still fall short of customer demand in the fourth quarter. Within consumer, we expect to keep optimizing this business for gross profit, with growing impact from component costs and some additional impact from supply constraints; for service provider and related products, we expect revenue of approximately $17 million; and while this reflects our focus on optimizing for contribution profits, it would represent an approximate 28% year-over-year decline for this category. Taking these factors into account, we expect fourth quarter net revenue of $160 million to $175 million. Turning to profitability: we anticipate approximately 150 basis points of consolidated gross margin pressure in the fourth quarter versus the prior quarter, driven primarily by rising memory costs and increasing transportation costs tied to our production recovery efforts. While our pricing actions and cost mitigation efforts have offset the impact of rising component cost headwinds within the enterprise business, we expect elevated component costs to keep weighing on margins within the consumer business in the fourth quarter. With all of that in mind, for the fourth quarter we anticipate GAAP operating margin landing between negative 8.7% and negative 5.7%, while non-GAAP operating margin should come in somewhere from 0% to 3%. On the GAAP side, tax expense is projected to range from a benefit of $0.5 million to an expense of $0.5 million. Non-GAAP tax expense, meanwhile, is forecast at between $0 and $1 million for the fourth quarter of 2026. So to wrap up, our financial priorities are straightforward: seize the momentum and grow our higher-margin enterprise business at scale, clear the manufacturing constraints so that demand turns into its full revenue potential, and manage consumer profitability — all while preserving the financial flexibility needed to invest in our strategic priorities and drive sustainable long-term value creation. With that said, let's open it up for questions.
Logan Katzman
analystThis is Logan, sitting in for Adam. So first off, maybe regarding a few of the supply issues you're dealing with on the enterprise side. I believe last quarter you mentioned you anticipated targeted volumes would come back into production in 3Q, possibly 4Q; and at this point that's been moved out to 1Q '27. I know you covered this somewhat in the prepared remarks, but could you go into it a bit more thoroughly — what shifted with the manufacturing partner during the quarter? And then, what makes you confident this won't slip once more? And I have a related follow-up after that.
Charles Prober
executiveYes. Great question, Logan, and completely fair. Plenty of OEMs are posting results this quarter and discussing the supply environment. Much of that relates to components; and that's an area where we've done a really solid job locking down what's needed to build our products. We find ourselves unfortunately on the receiving end of unfulfilled commitments from one of our manufacturing partners. Ultimately this is something we're accountable for. But commitments were made, commitments were missed. And all of this stems from a factory transition that took place in Q3 that was supposed to raise production volumes, but the execution of that fell short. And the remediation plan is in place. I was on the ground there in October, meeting with the CEO of that partner together with the executive team and the folks responsible for day-to-day execution. We went through the remediation plans. They walked us through the root causes, and we identified them. So we've got confidence that momentum is building on the production side of things. But since demand is strong, it's going to take us a little bit to catch up and to burn down that backlog. So that's a bit of added context beyond what we had — what we shared on the call. And by the way, this doesn't just impact our enterprise managed switch products. It impacts our consumer router portfolio as well. So it's hitting both sides of the business.
Logan Katzman
analystGot it. Yeah, that really helps. And honestly it kind of sets up my next question. As you said, backlog's been solid. I believe enterprise was up over 2.5% — or 2.5x — quarter over quarter. So I realize these issues are also cutting into some of the inventory supply you have. So I suppose once this gets sorted out, how long will it take for that inventory supply to, I suppose, move through you folks and then move through your partners? And I was just sort of wondering about the conversion and the timing on that.
Charles Prober
executiveYeah. I'll kick things off, and Bryan can jump in if he has anything to add. So the backlog right now sits at nearly $20 million on the enterprise side; and so production will need to satisfy current demand and then catch up to that demand before we can work that backlog down. Our enterprise business isn't one — I think we've discussed this previously — it's not a business where we'd anticipate holding a backlog; so this simply reflects how little supply is available. On the consumer side, where we have no inventory to sell from, much of that demand is perishable. So in Q3, the revenue impact came to about $4 million, but that's mostly perishable demand, since consumers will move to a product that fits what they need and is in stock. So the way to think about the backlog is that in Q4, we're hoping to hold it steady or shave it down a little, and then begin making far more headway against it in the first quarter of next year.
Bryan Murray
executiveYes. The one additional point I’d make regarding your question about timing — specifically how soon it can reach actual end-user demand — is that we’ve been operating, and clearly will need to keep operating, in a mode where we drop ship certain of those supplies straight to customers so they can get to projects on schedule. So it will happen relatively soon, though we do want channel inventory levels brought to a healthier point. The best proxy for that, I’d say, within the information we’re reporting, is the U.S. distribution inventory levels, which is much closer to a pure-play enterprise view. Of course, it doesn’t include some of the direct manufacturing partners we have, but as you can see in the quarter, that was down just over three, which is extremely low. And even lower than we were a year ago, when we also had some supply challenges. So we want to replenish that, but that should give you some perspective on how we are trying to do everything we can to make sure the right products get to customers at the right time.
Charles Prober
executiveYeah. Perhaps one last thing on that, Logan. The good news underneath all of it is that demand is really strong, right? So the transformation is paying off. Pro AV demand remains robust. We're seeing demand strengthen in the rest of the enterprise business; so the transformation is gaining traction, and it's all very encouraging; so it's frustrating that we don't have the supply required to satisfy that, but we're doing all we can to get past that issue.
Logan Katzman
analystUnderstood. Yeah, that's really useful. Really useful. But shifting gears — you folks have had a strong year on memory and components. I'm just wondering, what does your visibility into next year look like? And has anything shifted in that environment when it comes to locking down supply? Has it loosened up? Or are you finding it — is it getting tighter, or something along those lines?
Charles Prober
executiveYeah. I'd say the supply situation, again, as you'll hear from a great many OEMs, remains tight, and it's spreading past memory, correct? So that means flash and PCB and MLCC; and so our team is putting in tremendous effort, often working straight with the makers of those components and in other cases alongside our OEMs, to lock down supply. You'll see in the Q we filed that raw material inventory rose. So raw materials increased by roughly $25 million, finishing the quarter at $36 million in Q3; and so what we're doing is leveraging our balance sheet to shield ourselves from a component and supply problem and to capture the benefit of component costs we've bought over the course of the year into 2027. Bryan, do you have anything to?
Bryan Murray
executiveNo, I believe you've gotten to all of it.
Logan Katzman
analystGreat, I appreciate that. Then here's my last question. I was wondering whether you could provide a general update on how competition looks right now. And perhaps you could address both parts of the business. On the enterprise side, I think we've noticed some new vendors — brand names — making announcements in the Pro AV market. And on the consumer side, do you have any thoughts there?
Charles Prober
executiveYes. Let's begin with the AV category on the enterprise side. One thing our partners keep telling us is that supply is tight everywhere; the big incumbents in that space that we've been taking share from are facing much longer lead times and significant supply challenges. Some product announcements have come out that claim to address the AV use cases. We haven't seen any traction or momentum of any kind from those. Obviously, we're watching carefully. On the enterprise networking and security side, there's a lot of disruption in that market given some of the M&A activity, with one competitor having gone out of business; and so we feel we remain really well positioned with the value proposition we bring to partners, which is reliable enterprise grade yet super simple and fully integrated networking and security. So as I said on the call, we see ourselves turning a corner in that business, and we hadn't seen that for several years; so we're really excited about it. On the consumer side, the environment remains competitive. Obviously, we're monitoring the regulatory environment. The SEC regulations passed in March stand, and you can't launch new products unless you have conditional approval. And so we've seen Eero and ASUS receive approval along with NETGEAR, which is the first one kind of in our competitive set. But there's no real change on the consumer side; it's still a competitive market, and we're performing well as we optimize that business for gross profit.
Bryan Murray
executivePerhaps I could just add something there, Logan. The sole point I would put in is that among the factors, or items, we have been monitoring — and we discussed raising prices on the consumer product sets — you are seeing that widely across consumer products. That has not happened in our category, but lately we have observed some competitors in certain pockets of consumer networking raising price. And as we stated, we intend to do so as component cost keeps ramping.
Solomon Wang
analystThis is Solomon speaking in place of Tore. You've already provided some excellent detail regarding the memory situation. However, I believe you touched briefly on perhaps raising certain prices selectively. So I'm curious how we should view the gross margin trajectory going forward in light of this memory situation? And to what extent can pricing and mix be leveraged to offset things, perhaps as we look toward '27?
Charles Prober
executiveLet me begin, and then Bryan can chime in. I'll start with the enterprise business. That's a good question; we've consistently stated that our approach in the enterprise segment involves passing the added supply cost through to end customers, and that approach has been effective so far. We raised prices earlier this year. We mentioned on this call that we've put through a further price increase effective in November; it's a highly strategic price increase. It isn't broad-based. And so as you look ahead to Q4 and into 2027, we — during our Investor Day last year, discussed midterm gross margin targets for enterprise; we've already surpassed those. Still, we intend to aim to hold a strong margin position and pass those added costs through to end customers. And Bryan, would you like to address consumer?
Bryan Murray
executiveYeah. Like we’ve been saying from the start, the memory effect hits much harder on the consumer side. Memory makes up a bigger share of the total BOM, and up to now market conditions haven’t given us much room to push prices up the way you’ve seen happen in other consumer categories such as PCs. As I mentioned a moment ago, we’re beginning to see some of that shift in the market. We’ll respond early in the year to deal with and offset part of that. We won’t be able to offset all of it; at this point we’re taking steps like reviewing promotional activities and optimizing for gross profit. But we’re looking forward to announcing the price increases in January.
Solomon Wang
analystUnderstood, that's helpful. Perhaps turning to enterprise and Pro AV — you mentioned some strong momentum this quarter, everything from NATO to the Olympics. I'm curious, if you break the Pro AV segment down, where exactly is the growth — which part do you see growing fastest? Are there particular areas or verticals? Or would you say growth in Pro AV is really coming from a very broad range?
Charles Prober
executiveOur view of the market breaks it into a few pieces: commercial AV, meaning corporate offices, conference rooms and so on. Then there's digital signage. As we've said previously, we power some of the most sophisticated digital signage rollouts anywhere in the world. Next comes live events, and then broadcast, which spans everything from corporate broadcast — plenty of large enterprises run their own broadcast studios — through to the major broadcasters. That's how we frame it, and growth is occurring for IP-based networking across every one of those; the growth rate is quite healthy, and we're beating it and gaining share. So all of those market opportunities are where our focus sits. Initially, I'd say commercial is where we've been strongest, but we're pushing into live events, signage and broadcast — I mentioned the milestone around all the SMPTE enabled switches that broadcast use cases require. We more than doubled that this quarter year-over-year. So progress there is solid; yet the entire AV market, every one of those verticals, is where our focus lies.
Jay Goldberg
analystSo CJ, at the beginning of your prepared remarks, you described our supply situation in a fairly somber way. Yet the demand side still sounds extremely strong. If those supply constraints weren't there — and they sound pretty idiosyncratic to your supplier — then for Q4 your revenue, the outlook, would be — can you say it would be much higher?
Charles Prober
executiveIf we had enough supply to burn out the backlog and meet the demand we're seeing on the enterprise side and in our consumer router portfolio, it would be higher. And I didn't mean to come off that way this summer. We're actually really excited about all the progress. Maybe it was — maybe I sounded a bit annoyed, because I am; that's something at least partially outside of our control, but we're aggressively working with the partner to address it, and it's impacting our business this way. When you hear about the component challenges impacting others, of course we're seeing the cost increases, but we've got ample component availability, and we haven't seen shortages there. So yes, overall, it's a situation that we need to address. It's partially outside of our control, but we have people on the ground, as I said, and we're all over it. So I'm actually really excited about the progress we're making and just wish we didn't have this bump in the road with this partner.
Jay Goldberg
analystYes, got it. It's been quite a tough year for supply chains right across the board. So what I wanted to do — I wanted to bring up AI, since I think we're obliged to discuss it this year. Are you seeing more demand on the enterprise side, as enterprises and small and medium-sized businesses grow more conscious of the risks that come with AI? Does that help drive your business, on both the hardware and the non-hardware side?
Charles Prober
executiveI'd say that isn't a major driver of the business right now. What I would say, though, is that the build-out of AI data centers is clearly the underlying cause of the supply problem. And I do see AI and the effect it has on NETGEAR as a net positive. So yes, we're having to work our way through these supply issues. However, when you consider the journey we're on, the work we've done to bring software in-house, the way AI has helped speed that up, the fact that we're transforming the entire organization aggressively, that's letting us apply AI in our operations to drive efficiency. And then we're enabling AI experiences in our products; so some of that is becoming table stakes; so if you think about, say, AI for running your network, spotting issues, resolving issues autonomously, things like that, of course. But we have — we believe we've got some really innovative AI-enabled experiences and solutions that are going to let us stand out. We're kind of in this position where, because we're building this capability from scratch, it lets us move more quickly, and we never would have had the success we've had in sourcing software without the benefit of AI. So I wouldn't say — to answer your question, I wouldn't say there's like a direct link to the demand we're seeing today from AI-related use cases. So I do think AI is going to net out to be a real big benefit to NETGEAR if you look ahead two, three years.
Jay Goldberg
analystGreat. Then last, you mentioned this briefly and also in the prepared remarks, but could you update us on the software in-sourcing that you took on? How is it going? How do you feel about it? Is it achieving what you intended?
Charles Prober
executiveYes. I mean, I wouldn't claim we're fully finished, but we're extremely close to completing the burn down of the outside contractors, getting the code onboarded to our internal teams, and this applies across the board. So we've assembled teams focused on our next-generation operating systems across consumer and enterprise. We have teams that own the application development. There's a lot of really exciting integration work happening between, like, Insight and Axiom, and you see what we're enabling with the Align controller. So we've — yes, we're really, really pleased with the progress we've made, and that's kind of the first pillar of our transformation. So great progress there.
Jay Goldberg
analystCool. And my final question, then: I believe you mentioned that sales outside of devices and hardware grew by double digits in this quarter. Does that reflect the in-source software effort you've been doing? Or is there still more to come on the digital — on the software and services side?
Charles Prober
executiveMuch more is still ahead there. Let me clarify: so we had — if you look at the recurring revenue we report, we saw growth in the double digits. Most of that is still being driven by our consumer business. The doubling I mentioned refers to our complete revamp of the Insight cloud management platform. And in Q3, billings for that came in at more than double what they were year-on-year. So that's just one proof point that these investments are paying off; on the enterprise side, though, besides Insight, we have our security platform, and we have support and professional services. So there are a number of different levers we're pulling there; and I'd say we're still early in fulfilling what our customers need, in meeting our potential, but the progress is great; and so it will only get better. That's the amazing thing about software. It only improves over time. And we're seeing some real proof points. And as I said on the call, we're committed — we remain committed to the mid- and long-term targets we shared at our Investor Day.
Charles Prober
executiveYes. Well, thanks to everyone for being on this call, and I want to express real appreciation to the NETGEAR team worldwide for everything incredible they accomplished in Q3 and for what lies ahead in Q4. So this is the NETGEAR team saying goodbye. Thank you.
Operator
operatorThis concludes today's call. Thank you all for attending. You may now disconnect. Goodbye.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete NETGEAR, Inc. transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.
Get the API View API docs →This call discussed
For developers and AI pipelines
Programmatic access to NETGEAR, Inc. earnings transcripts and 132,000+ others is available through the
EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments,
full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.
More tools for stock research
OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in NETGEAR, Inc. or any ticker on your watchlist.
StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.