United Microelectronics Corporation (2303) Earnings Call Transcript & Summary
October 29, 2025
Earnings Call Speaker Segments
Operator
operatorGood day, everyone, and thank you for joining UMC's conference call covering third-quarter 2025 earnings. <<operator_script>> Please be aware that this call is being streamed live right now via the Internet. A replay of the webcast should be accessible 2 hours after we wrap up. You can find it on our site, www.umc.com, by going to the Investor Relations area, then Investors, then Events. At this point, let me welcome Mr. Michael Lin, who leads Investor Relations at UMC. Mr. Lin, the floor is yours.
Michael Lin
executiveThanks, and welcome to UMC's conference call covering the third quarter of 2025. With me are Mr. Jason Wang, President of UMC, and Mr. Chi-Tung Liu, the CFO of UMC. Shortly, our CFO will walk us through the third quarter financial results, and after that our President will share his key message covering UMC's focus along with fourth quarter 2025 guidance. When our President and CFO have finished their remarks, we'll open a Q&A session. UMC's quarterly financial reports can be found on our website, www.umc.com, in the Investors, Financial section. Over the course of this conference, we may make forward-looking statements grounded in management's current expectations and beliefs. Such forward-looking statements carry a number of risks and uncertainties that could cause actual results to differ materially, including risks that may lie beyond the company's control. For a more detailed description of these risks and uncertainties, please refer to our recent and subsequent filings with the SEC and the ROC security authorities. During this conference, you may view our financial presentations material, which is being broadcast live through the Internet. Now I'd like to introduce UMC's CFO, Mr. Chi-Tung Liu, to discuss UMC's third quarter 2025 financial results.
Chi-Tung Liu
executiveThanks, Michael. I want to walk everyone through the investor conference presentation for the third quarter of 2025, which you can download or view live on our website. Beginning on Page 4: for Q3 2025, consolidated revenue came in at TWD 59.13 billion, and gross margin was 29.8%. Net income attributable to the stockholder of the parent was TWD 14.98 billion, and earnings per ordinary share were TWD 1.2. The capacity utilization rate rose to 78% during that quarter, with wafer shipments just reaching 1 million 12-inch equivalent wafers. Moving to Page 5, on a sequential basis, third quarter revenue of TWD 59.12 billion was slightly higher than the prior quarter, primarily because of increased wafer shipments, even though the NT dollar exchange rate was an unfavorable factor of approximately 3%. Gross margin also rose to 29.8% on the strength of the improved capacity utilization rate. And net income came to almost TWD 15 billion, or an EPS of TWD 1.2 per share in NT dollar terms. Turning to the year-over-year comparison on Page 6: across the first 3 quarters, revenue increased 2.2% year-over-year to TWD 175.7 billion. Gross margin was approximately 28.4%, or close to TWD 50 billion, for the first 3 quarters of 2025. All told, net income for the first 3 quarters declined to TWD 2.54 per share, versus TWD 3.12 in the previous 3 quarters of 2024.
Chi-Tung Liu
executiveLooking at Page 7, our cash position is still over TWD 100 billion, and the company's total equity now stands at TWD 361 billion as of the close of the third quarter of 2025. The ASP shown on Page 8 has held steady across the last 2 quarters. Turning to Page 9 for the revenue breakdown, we can see North America accounts for roughly 25% of overall revenue in the third quarter, which is 5% higher than the 20% recorded in the prior quarter. In contrast, Asia fell by almost 4 percentage points, landing at 63% in the third quarter of 2025. The IDM versus fabless split on Page 10 is unchanged for the third quarter of 2025. On Page 11, we observed that communication and computers both edged up in the sales mix, while consumer dropped by almost 4 percentage points to 29% in the third quarter. Page 12 covers segment sales by technology: 22 and 28 remain our primary technology nodes, with 22 still gaining in percentage terms. Combined 22 and 28 revenue came to approximately 35%. Revenue for 40-nanometer and 65-nanometer was roughly flat, at about 17% and 18%, respectively. As for quarterly capacity in the third quarter, we saw a slight uptick from our 12x Xiamen fab, where monthly capacity now totals almost 32,000 wafers per month, and total available capacity should stay flat over the coming quarters.
Chi-Tung Liu
executiveWrapping up my deck, our yearly CapEx is moving toward the budget figure of $1.8 billion, split 90% for 12-inch and 10% for 8-inch. That covers the highlights of UMC's third-quarter 2025 results. Further specifics can be found in the report, now available on our website. At this point I'll hand things over to UMC's President, Mr. Jason Wang.
Jason Wang
executiveThank you, Chi-Tung. Good evening, everyone. I'd like to walk you through UMC's results for the third quarter. During Q3, we saw demand rise across the majority of market segments, and that pushed wafer shipments up 3.4% while lifting our utilization rate to 78%. We gained in particular from stronger sales of smartphones and notebooks, which drove replenishment orders from customers. Our 22-nanometer technology platform keeps giving us differentiation in the marketplace — 22-nanometer revenue now makes up more than 10% of total sales, and in 2025 alone we are projecting over 50 product tape-outs, with the 22-nanometer contribution expected to keep growing in 2026. In line with our strategy of offering customers highly differentiated specialty technologies, we announced recently that our 55-nanometer BCD platform is ready. Beyond mobile and consumer applications, this new platform also meets the most rigorous automotive standards for automotive and industrial use. Turning to the fourth quarter, we expect wafer shipments to be comparable with third quarter's volumes, closing out 2025 with shipment growth in the low teens. UMC keeps delivering competitive process technologies that support diverse applications, which positions the company to benefit from a broad-based market recovery.
Jason Wang
executiveSpecifically with the 22-nanometer logic and specialty platform, we anticipate generating growth. Now, let's turn to guidance for the fourth quarter of 2025. Wafer shipments are set to stay flat. ASP in U.S. dollars should hold firm. Gross margin is expected to come in at roughly the high 20% range. The capacity utilization rate should land in the mid-70% range. Our cash-based CapEx budget for 2025 is going to stay the same, at USD 1.8 billion. That wraps up my remarks. Thank you, everyone, for listening. At this point, we're ready to take questions.
Operator
operatorTo start things off, we'll go to <<inaudible>> from Bank of America for your questions.
Analyst
analystI'll start with the near-term outlook. Can you go into more detail about how you're seeing the business trend by end market as we move into the current quarter and into the fourth quarter? The guidance looks like it's above seasonal, so I'm just wondering whether something is driving that. And then also your early take on the first half of next year — have you heard anything from your customers about possible restocking, or are they, broadly speaking, still fairly conservative at this point?
Jason Wang
executiveSure. I mean, as we head into Q4, we can — like I mentioned, we're finishing up 2025 shipments at a low teens level. It's at this point that we're projecting 2025 shipment growth was supported by our differentiated 22-nanometer technology and other specialty offerings across both 12- and 8-inch amid a broad-based market demand recovery. On the 12-inch side, shipment growth was driven by strong momentum from 22-nanometer logic for ISP, Wi-Fi connectivity as well as the high-end smartphone display driver IC. Beyond 22 and 28, overall 12-inch wafer shipments will outpace our addressable market thanks to our comprehensive value-added specialty portfolio of nonvolatile memory, RFSOI and BCD. On the 8-inch side, we expect high single-digit growth in 2025, mainly led by PMIC and LDDI. So in summary, the strength of 22-nanometer and the specialty process across both the 12-inch and 8-inch platform underpins our confidence in achieving a low teens percentage shipment growth in 2025. So for 2025 Q4, we remain — the shipment outlook remains flat. If we look into an early view of 2026, I think we're still going to see some seasonality, but looking at the entire year, despite the ongoing global economic geopolitical uncertainty, we believe our 2025 business growth momentum will carry into 2026, where we expect wafer shipments will increase year-over-year.
Jason Wang
executiveBeyond certain TAM expansion, our 22 eHV — that's the 22-nanometer eHV platform, which serves the high-end smartphone OLED display driver application — is going to be among the key growth engines. For 2026, we anticipate double-digit year-over-year growth in overall 22- and 28-nanometer revenue. That said, some seasonality is still something we may need to work through. As a result, Q1 could be one of the tougher quarters of the year. With strong customer adoption of our 22-nanometer technology backing us, plus our RFSOI technology readiness for smartphone RF front-end devices, growth in 2026 will get another boost. And on top of growth in the communications segment, we also expect our enhanced version of the PMIC solution to keep driving recovery in our 8-inch segment. For 2025, we expect the PMIC business to grow in the high single-digit range, and that momentum should carry into 2026. Our work on sharpening technology competitiveness — especially for PMIC applications — has begun producing tangible results, and that will help us strengthen our position in this market segment and support growth in 2026. Looking past 2026, we will keep developing new derivative technology to enhance our differentiated position and bolster our competitive standing.
Jason Wang
executiveAlso, we're broadening the market we can reach into 12-nanometer FinFET, as you're aware, and into parts of the advanced packaging area too. When it comes to UMC's portfolio — the technology portfolio is in a strong spot to meet rising demand for power efficiency optimization, high-bandwidth data transfer, and better connectivity. So overall, I'd say we're fairly confident about 2026, though it's still a bit early to get into quarterly guidance.
Han Liu
analystRight, that's quite an intensive one. I think a quick follow-up to what I asked first: when you said the growth momentum might carry on into 2026 versus 2025, are you actually saying that wafer shipment could still be expanding by low teens at a minimum next year? Because you just listed a lot of growth drivers by application, particularly on 22-nanometer, 28-nanometer, and also 8-inch. So I'm just wondering whether you're implying that wafer shipment could rise by another low teens at least for 2026?
Jason Wang
executiveI mean, we aren't providing the blended figure — the wafer shipment number — right now. We're probably set to give you clearer detail once we get to Q1, but for 22 and 28 in particular, yes, I think as we move into 2026, we still expect double-digit growth year over year.
Han Liu
analystThen for my second question, I'd like to ask about the gross margin trend. For the fourth quarter, I believe you guided to flat shipments as well as flat pricing. Foreign exchange appears more favorable at this point. So why wouldn't gross margin come in above the third quarter? I'm just curious why that happens to be so. Or should we view high 70% utilization as translating into gross margins in the high 20% range going forward?
Chi-Tung Liu
executiveFor the third quarter, gross margin is in fact a bit above where it landed in the prior quarter. Utilization rate, ASP, product mix, depreciation, and foreign exchange are the main things gross margin hinges on. As you're aware, although the FX rate might come in on a forecast basis, better than forecast, it still appreciates against the U.S. dollar, which is our key receivable currency, so the situation remains unfavorable, and as I said earlier, that consumes close to 3% of total revenue. And for Q4 '25, we do expect gross margin to stay within the high 20 percentage range bandwidth. Even with variables like our depreciation, we'll still see a quarterly increase. And this year, annual depreciation expenses are rising 20% plus. So I hope that covers your questions.
Han Liu
analystYes. And then a related follow-up concerns your cost structure. You managed to bring the other manufacturing cost line down quite well in the third quarter, even though labor cost came in higher, electricity cost came in higher, and material — or even wafer shipment — was slightly higher versus the second quarter. So could you expand in more detail on how we should think about those other manufacturing costs, which I believe are mostly variable cost? How should we think about the trend there going forward?
Chi-Tung Liu
executiveA portion of our employee compensation comes as a bonus tied to profit sharing. So when third-quarter profit improves from one quarter to the next, we have to account for a larger bonus, and that pushed compensation expenses higher in the third quarter.
Han Liu
analystEven so, it was lower than what we saw in the second quarter. I guess I'm curious whether anything specific is causing that drop, and whether we should expect that pattern to keep going.
Chi-Tung Liu
executiveNo, that trend isn't going to carry on. It'll move up and down in line with how we recognize profit on a rolling basis.
Operator
operatorMoving on to the next question, from Charlie Chan at Morgan Stanley.
Charlie Chan
analystThanks for the kind words on the strong results — particularly the gross margin performance. Let me begin with what people are calling geopolitical uncertainty. Jason, could you expand a bit on the types of macro uncertainty you expect to persist through 2026? One of your customers asked me about speculation that semi-tariffs might arrive next January. What sort of impact — what potential effect — could that have on your business or operations? And there's another uncertainty as well: a couple of weeks ago, right, the rare earth supply situation. Has your team worked through any analysis of the potential impact if rare earth restrictions return?
Jason Wang
executiveOkay, a few points. You brought up the geopolitical side of tariffs, so let me begin there. We recognize that tariffs could have an effect and that this creates uncertainty and risk; we'll stay cautious about those possible business consequences and keep them in mind as we plan for 2026. As of right now, we haven't observed anything, though we remain cautious. Even with that uncertainty, we'll keep concentrating on what's foundational to our business — technology differentiation, manufacturing excellence, and customer trust — so that our competitive position gets stronger. So I think we still need to return to the fundamentals. When it comes to UMC and geopolitical concerns, my belief is that UMC has manufacturing sites diversified geographically around the world. The global semiconductor landscape keeps changing. Customers and governments alike are placing growing emphasis on geographic diversification and supply chain resilience, along with tariffs. But to respond to structural shifts and match customer needs, our strategic initiative — which includes building capacity in Singapore and the U.S. and is meant to complement our Taiwan facility — will let us support customers better across multiple regions.
Jason Wang
executiveLooking ahead, our goal is a balanced split of capacity between Taiwan and sites abroad, though any chance our customer offers is something we'd welcome. Be it a hit or a chance for us, we'll likely need to position ourselves and be prepared for those dynamic shifts. Yes.
Charlie Chan
analystOn the semiconductor tariff specifically, correct — I believe we covered this same topic a quarter or 2 quarters back. So are you also hearing that this January coming might be when the semi tariff is finally implemented? And second, could UMC secure an exemption from that semi tariff?
Jason Wang
executiveHonestly, your guess would be just as good as mine, so I won't venture one.
Charlie Chan
analystMy TV viewing is the only thing I do.
Jason Wang
executiveYes. So we'll be careful on this front, and we're watching progress and developments closely. And at the same time, since we are putting investment into the U.S., we're definitely going to make our case. But there's nothing further to update here. But if anything comes up, we will definitely call back.
Charlie Chan
analystAlright, understood. On the second question, it concerns how sustainable your gross margin is. I realize there are pluses and minuses this quarter and the one coming up, correct? Yet taking the broader view, looking at next year, it appears that certain peers in your industry — maybe just name TSMC — have raised their wafer pricing. And lately we're noticing that the back-end foundry, while not exactly an industry peer of yours, is rather part of your downstream supply chain, correct, is also trying to raise prices for back-end foundry services. So what sort of potential wafer price increase does UMC have in mind going into next year?
Jason Wang
executiveAs Chi-Tung said before, margin is a reflection of how ASP loading and various other factors play out. So let's focus on ASP specifically. When it comes to the ASP outlook, our 2025 ASP performance has held up firmly in a dynamic business environment, staying stable at a healthy level all year long. And so — we anticipate ASP will stay firm in Q4 2025. As for the 2026 ASP outlook, more detail will come during the January 2026 conference call, since we're in discussions with customers to align on that. So we'll likely have more details to share on the next conference call.
Charlie Chan
analystAlright, and turning to costs — Jason, in an interview you mentioned your team aims to bring some expenses lower. Yet it seems to me that the majority of the components, well, most of what I'm picking up suggests commodity costs could rise, correct? So regarding the expense side, do you have any early view you can share for 2026?
Jason Wang
executiveWithout diving into a particular cost projection or outlook, I think we can probably give you an update on how we see costs — our perspective on cost. Cost competitiveness has always been a shared objective for both us and our suppliers, so that we can be competitive. So we're working closely together with our suppliers. We'll keep pushing toward cost savings in 2026, and that's been underway for many years, but we are continuing to do that into 2026. But that involves a combination of both internal and external efforts. It's not just working with the supplier, it's also internal efforts. For instance, we've already begun leveraging some smart manufacturing and AI technologies internally to boost our fab efficiency and enable our long-term operational competitiveness. So that's also a major piece of driving our cost goal. So I think there are many initiatives that we're deploying, and we work with the supplier — supply chain is just one of them.
Charlie Chan
analystAll right, all right. And for the final one, I'll rejoin the queue afterward. So I'm aware that your company and your team have been going through quite a bit of strategic or marketing research, correct? So not long ago, we came across one data point that I'd like to share with you and also get your perspective on. Due to the T-glass shortage, right, we're beginning to see tightening in BT substrate supply. From where you sit, or from UMC's standpoint, would that type of thing put a constraint on — on some demand from your customers, for instance, consumer or smartphone SoC demand heading into 2026?
Jason Wang
executiveWell, we honestly haven't encountered that, though we're keeping a close watch on how resilient the whole supply chain is. This AI momentum is what's driving the market right now. So a number of areas are showing possible supply concerns. Even so, up to this point, no impact has reached us. But as you mentioned, all of us are watching to see whether any will arise. In the meantime, we're handling things — internally, from our own standpoint, we're managing our supply resilience. We aim to make sure of supply assurance and also — on both the supply side and the demand side — supply and demand, along with quality standards and cost. So I believe that has always been our internal initiative. So I'd simply have to say we haven't observed any impact from the recent market dynamic, yet it's something that's always on our radar screen, and we keep monitoring it.
Charlie Chan
analystYes. What about recovery in demand for smartphones or PCs — do you have a crystal ball on that? Do you expect those 2 big end-demand segments to recover significantly next year?
Jason Wang
executiveSo, I mean, for Q4 '25 at least, we're expecting wafer shipments to stay flat, and the markets are showing fairly healthy inventory levels too. In our segment, we see a slight decline in communication, while computing, consumer, and automotive are up a bit. So I'm not certain that particular supply issue is having an effect, but it probably reflects more of what's tied to end demand.
Operator
operatorLaura Chen at Citi, you have the next question.
Chia Yi Chen
analystMy first question also concerns the margin outlook. Chi-Tung, you said depreciation expense for this year rose roughly 20% plus compared with a year earlier. Yet we know that in the first half, depreciation cost went up by almost 30%. So does that imply the year-on-year growth in depreciation cost is trending toward a slowdown in Q4? Given that your overall utilization rate and ASP both appear resilient, along with greater exposure to 28-nanometer, should we be anticipating some possible upside to gross margin?
Chi-Tung Liu
executiveWell, beyond depreciation, several other elements come into play. As Jason said, we'll get a clear picture of ASP, which is a key piece of the margin equation. But looking at depreciation by itself, yes, with that larger amount, we drop to roughly low teens in 2026 compared with 20-something in 2025. And during the prior quarter, we noted that either '26 or '27 ought to be the high point of this recent depreciation curve. So in that sense, it gives us a solid floor that supports our EBITDA margin.
Chia Yi Chen
analystAll right, great. And my second question is, I remember we talked about the Interposer business previously. AI demand is surging, as we know. So I'd just like to get a sense from UMC — do you have any updated perspective on your Interposer strategy? And we also know UMC has wafer-to-wafer technology. So I'm just curious what the plan is there. And beyond that, do you intend to expand capacity further on Interposer?
Jason Wang
executiveOkay, so on the advanced packaging front, the most recent update is that we'll keep getting our advanced packaging solution ready for this expanding market tied to the energy consumption of cloud AI as well as the edge AI market. At UMC, what we're doing is developing the 2.5D Interposer with DTC — that's the deep trench capacitor — plus discrete DTC, so we can address the power efficiency requirement across all AI, HPC, PC, notebook and smartphone space. And number two, UMC is taking advantage of scalable 3D wafer-to-wafer packaging stacking along with the TSV in order to enhance the — enhance our specialty technology offering. We're right now in mass production of an extremely small form factor for the 5G and 6G RFIC, and we do that by leveraging the wafer-to-wafer stacking technology. Given how well the 5G and 6G RFIC has worked through the wafer-to-wafer stacking, we're also working on memory-to-memory stacking and memory-to-logic stacking service to meet the high-bandwidth computing requirements. So our technology really is tied to the center with the DTC capability and the wafer-to-wafer stacking capability. At this moment, we're still within our current capacity size — there's no expansion planned — but a lot of customer interests and engagement are being developed right now.
Chia Yi Chen
analystOkay, great. And could you also give us some sense of how that kind of business opportunity is growing over the next few years?
Jason Wang
executiveLike I said, we expected this: cloud AI and edge AI markets are likely to take off in roughly the next 2 years. So our view is that building those technology capabilities now puts us in a good position to serve that market once it arrives. A lot of customers, I think, are part of that conversation and are looking at the product roadmap at this point. As for real volume and when the ramp-up happens, my expectation is probably late 2026 or some point in 2027.
Operator
operatorMoving on, Sunny Lin from UBS, you have the next question.
Sunny Lin
analystCongrats on the strong outlook — really glad to see the business stabilizing and improving. My first question is about pricing. I understand more specific guidance is coming in January or early in 2026, but I'd like a bit more color on the latest progress in your engagement with clients. So in 2024 and 2025, you basically provided a roughly mid-single-digit type of price reset across the board. How should we think about early 2026? Would it be fair to assume that, given improving supply/demand, any price decline should now be smaller than the magnitude in early 2024 and early 2025?
Jason Wang
executiveSure — that's definitely what we're aiming for. That said, since talks with our customers are still ongoing and we're still getting aligned, I really can't give a figure on it. I genuinely need to see the data first before saying anything about it. Still, through the annual discussions and what we see in the patterns in January, we'll likely keep having similar conversations. As for how big it will be, I'd say it's a bit too early to guide on that right now.
Sunny Lin
analystUnderstood. Perhaps a follow-up regarding blended ASP. Some worries persist that overhang from LTAs coming due over the next few quarters might pressure your blended ASP. So, Jason, could you give us a little more detail on whether there's any effect, or whether that effect has largely already worked its way through?
Jason Wang
executiveWhat I mean is that LTA is among the tools that assist both us and our customers as we work with other partners—it isn't purely about ASP. It's also that we rely on it to establish a mutual commitment under which we add capacity to serve the customer. Meanwhile, the customer shows a certain commitment toward the business engagement. So LTA will keep fulfilling that role. Well, with the way the market is moving, we're constantly collaborating closely with our customers, helping them and picking up market share while not shedding market share—gaining share—and also responding to market dynamics when it comes to commercial needs, so—yet at the same time, we must strike a balance where CapEx returns are concerned. So this is a complicated process and discussion, and we've been at it for the past 2 years, and we'll keep helping our customers move in that direction, seeking a win-win solution through the LTA arrangement. But the future commitment of LTA stays intact, yes.
Sunny Lin
analystUnderstood. So perhaps just one thing about 2026, to confirm I have the correct figure. Regarding 2026, Jason, did you say earlier that the goal would be double-digit growth for the business?
Jason Wang
executiveRegarding the 22- and 28-nanometer nodes, I said that we expect that momentum to carry into 2026, and yes, we anticipate a double-digit increase year-over-year. As for the...
Sunny Lin
analystUnderstood. And perhaps a question about expanding in Singapore. So is there any kind of latest update you could share with us regarding how quickly those capacities will be ramped up in 2026?
Jason Wang
executiveOn the milestone, I'd say there's no change there. Our projection is that production ramp for the 12 IP3 begins in January 2026, with volumes building higher once the second half of 2026 arrives. That timeline for the milestone stays as it was.
Sunny Lin
analystUnderstood. Perhaps this is the final question. So regarding dividend policy, with cash flow prospects improving over the next few years, might the company think about revisiting that policy and shifting to something like an absolute cash dividend? Could that be possible?
Chi-Tung Liu
executiveThat’s not impossible, though we always aim to keep a sound balance between the high percentage payout ratio and absolute dividends. So I believe that strategy, or that position, is going to continue.
Operator
operatorMoving on to the next question, from Gokul Hariharan at JPMorgan.
Gokul Hariharan
analystI'd like to get a bit more clarity around pricing. I understand you're currently negotiating prices with customers. Could we spend a little time on 22 and 28? What's the pricing trend looking like there? Do you think any concession might be required on 22 and 28 pricing, or will it hold reasonably firm? And perhaps the same question for the 8-inch portion of capacity too, since some of your competitors are also sort of pulling back or kind of exiting some of that 8-inch capacity?
Jason Wang
executiveOur pricing approach has stayed extremely steady, and we'll collaborate closely with customers both to safeguard and to grow market share. So that part remains, and it won't change. As for the specific figure — the ASP guidance — I think it's preferable to have the complete picture assembled and then present it to you. Yet when it comes to pricing strategy and positioning, nothing has shifted there. We genuinely see pricing as drawing on several things: the value proposition created by technology differentiation, what our manufacturing can do, dependable capacity, and manufacturing spread across multiple locations, and so forth. So we feel we bring a great deal to the table. And together with the mutual commitment we share with many customers, we're confident we'll push toward an appropriate balance in the pricing conversation. That said, on the specific guidance regarding the ASP outlook, I'd rather hold off until we've wrapped things up. I don't want to steer you wrong at this stage. And that objective applies whether it's 22- or 28-nanometer, and the 8-inch as well, since every technology node carries its own market dynamics, and we'll operate inside those dynamics. In the meantime, you were asking whether we're seeing anything regarding the 8-inch opportunity or anything stemming from other players, our peers.
Jason Wang
executiveIt's not our usual practice to make remarks regarding competitors. Our belief is that we gained share during 2025 in 8-inch — and not only 8-inch, but across 8-inch and 12-inch legacy nodes generally. Those nodes, in our view, stay a sweet spot serving a broad spectrum of analog reach products. So we'll keep strengthening the product portfolio and concentrate on those areas. With luck, we can grow our market shares. We're continuing to optimize the platform we already have and to develop a new solution that better addresses that market need. This is a space where UMC has established some long-standing ties and trusted ties with our customers. We therefore believe this structural trend will reinforce our standing as the preferred foundry partner for customers with these needs. And that should actually help us sustain what may be growth in both 8- and 12-inch legacy nodes over the long run.
Gokul Hariharan
analystUnderstood. Yes, we're clear on pricing — we can hold until January. That said, I also wanted to ask about the semiconductor Section 232 tariffs. How are those conversations with your customers progressing? And suppose a 15% to 20% tariff applies to exports, and it has to be offset through some form of U.S. investment or U.S. capacity that you hold — how does UMC handle that scenario? And which investments, if any, would qualify for that type of offset? For some of your peers, I think this is fairly clear, but I just wanted to understand how UMC is looking at the situation.
Jason Wang
executiveAs I mentioned a bit earlier, we've long had manufacturing in a wide range of locations. So I'd say we're actually well matched to how the market is shifting right now. With all the current talk about geographic diversification and supply chain resilience, I think the steps we took previously fit right into that, and we'll keep going. We might tweak that strategy somewhat, make some adjustments, though nothing major. For example, we're adding capacity in Singapore and the U.S., which lines up closely with that direction. Naturally, with tariffs, whether it's X percentage, we don't yet know for Taiwan, but certain places have already been announced at 15%, and those are locations where our manufacturing sites sit. As a result, customers are holding discussions, keen to confirm they can reach those facilities and those locations. So we're certainly open to that conversation as a way to expand our business engagement. Our hope is that this turns into more of an opportunity for us rather than merely a negative impact. As for some areas that remain unclear, we'll have to work our way through them, and we believe this industry has very smart people in it.
Jason Wang
executiveRegardless of which way this turns out, we're going to work through this process and land on a win-win outcome with mutual benefits.
Gokul Hariharan
analystYeah, just to follow up on that, Jason — I think geographic diversification is one piece of it, but the other piece is U.S. capacity, correct? So is it your understanding that the 12-nanometer collaboration with Intel sort of qualifies as U.S. investment and U.S. capacity, given that I believe the total investment is actually pretty small, even though you're really taking on a lot of the technology-related work.
Jason Wang
executiveI mean, I really can't say whether it's big or small, but an investment is still an investment, and we're adding capacity in the U.S. And the 12-nanometer starting point alone gives us a solid foundation to explore possibly other collaboration opportunities too. So that also — if there's anything to update, we'll update you, but that could even represent more investment, right? So — but it's just — we're not ready to update you on anything yet. But even when I look at the 12-nanometer today, that's quite significant in terms of investment.
Gokul Hariharan
analystUnderstood. Perhaps one final question regarding the advanced packaging side. I believe during the last update you mentioned roughly 6K of wafer capacity for 2.5D IC packaging. Does that remain the level we're at capacity-wise? And for your 2.5D packaging that uses the deep trench capacitor, what's the application? Is it a somewhat different application you're going after versus the mainstream market, and is that the reason you're somewhat holding off on expanding capacity while the industry is still really requesting a great deal of capacity?
Jason Wang
executiveNo — the 2.5D Interposer 6K remains as it is today. Given that the technology road map is shifting toward the DTC, we have no expansion plans past that, and we are building out our DTC capability. In that effort, we're serving the AI, HPC, PC, notebook and smartphone space. So yes, our advanced packaging roadmap will center on the DTC heading into 2026.
Gokul Hariharan
analystSo at this point, would you say that 6K is running at full utilization, or is there still quite a bit of slack in that 6K capacity right now?
Jason Wang
executiveI mean, since the product is moving over to DTC, that's the reason we aren't adding capacity for the 2.5D at this point.
Gokul Hariharan
analystAlright, alright, that's reasonable. Now, regarding this DTC capacity, how big a revenue contributor do you figure it will turn into? For argument's sake — I believe you were looking at a ramp-up toward the end of '26, so let's take 2027 — will that be a reasonably meaningful chunk of your overall portfolio? Or will it remain fairly modest, along the lines of the Interposer-linked revenues, which have stayed at roughly a single digit — a low single-digit percentage of revenue?
Jason Wang
executiveMy sense is that making a prediction there is premature. One portion of the market ties to edge AI, and we'll have to hold off until there's greater clarity on that front. So as I see it right now, projecting that is still too soon. That said, from a technology standpoint, I'd say this is clearly at the heart of the next generation. We therefore have to ensure we're ready for it.
Operator
operatorMoving on to the next question, from Janco Venter at Arete.
Janco Venter
analystI wanted to circle back regarding the U.S. investment and get a status update on where things stand with the PDK. Also, we're hoping to understand how the business model works for this 12-nanometer engagement. Does it involve sharing revenue? Or is it a profit-sharing arrangement? And then second, on that same point, will moving to 12-nanometer end up cannibalizing the 22 and 28-nanometer customers? Any additional detail you could offer so we can better grasp this opportunity would be really useful.
Jason Wang
executiveAbsolutely. Looking at it from the project side, the 12-nanometer collaboration with Intel is going well at present and stays on track per the project milestone. We anticipate the early PDK being ready for the first wave of customers in January 2026. And UMC and Intel are both aligning with the customer device spec in order to facilitate the ramp-up. On the whole, the collaboration is moving forward as scheduled, and customer product tape-out is expected at the beginning of 2027. So that's the update on the 12-nanometers. As for the business model itself, we are working collaboratively together and engaging with the customer, and the actual business model is probably not something we'll elaborate on and share right now. But once — I think that will be a — the business revenue recognition, once it's ready, we'll update that. And the cooperation model is actually very structured and — but we'll probably have to report that after we're into production. I think those are the 2 questions you have, right? Did I miss any?
Janco Venter
analystYes. That's clear. Right, indeed. Perhaps only a single additional question. And I believe you mentioned this sooner when you discussed possibly considering additional investments. Now, if we examine — actually, we were attempting to figure out whether there might be room to broaden this arrangement into single-digit nodes, since, if you look at Intel's operations, their 7-nanometer is fully depreciated. And that appears to be an evident place for extending the deal. Is that something you might be considering? And would that be strategically sensible for UMC?
Jason Wang
executiveWell, I mean, the — yes, the short answer is yes, correct? And — but we need to begin from — we need to start with the 12-nanometer. So we had to ensure that it was executed well, so we can establish a solid base on that. Regarding technology past 12-nanometer, we're open to exploring future opportunities via partnership arrangements that benefit both sides. I'd say that working with Intel is significantly strengthening UMC's strategic position in the U.S. and for the U.S. market, and also expanding our addressable market while sticking to our disciplined CapEx approach. So we are very dedicated to this partnership. And so far, the project is actually going well.
Operator
operatorMoving on to Bruce Lu at Goldman Sachs.
Zheng Lu
analystIs my voice coming through?
Jason Wang
executiveYes.
Zheng Lu
analystYeah, I just wanted to follow up on the U.S. collaboration for nodes beyond 12-nanometer. At this stage, what are the showstoppers for us in moving beyond 12-nanometer? Or are we thinking about going backwards and doing relatively mature node capacity in the U.S.?
Jason Wang
executiveI mean, that's an interesting question, isn't it? I mean, the — I think when we discuss how this cooperation with Intel strengthened our positioning in the U.S. market, hopefully, we're not only limited at 12 nanometers and that if we can have a full potential of this position. And we — so that's why we're actually very open to explore the future opportunities through this. So I don't think there's a — I won't call any showstopper, but I think as long as it's mutually beneficial, I mean, we will definitely open to explore that. Now, is the exploration limited to the more advanced node or backward? I think we are also open to that. We're not limiting ourselves with that collaboration.
Zheng Lu
analystNo, Jason, the issue is that this is obviously a win for both sides, correct? So who's holding the ball here? I mean, who wouldn't want to move forward?
Jason Wang
executiveI think with any engagement, and not only this one, you need that market validation and you have to make sure your due diligence gets done. So I'd probably say that every conversation remains open and due diligence has to be in place before we move ahead. So it isn't really a showstopper. It's not about which sport it is — it's that we have to make sure we run the appropriate process.
Zheng Lu
analystPut another way, the precondition would be that you likely have to ship 12 nanometers with a reasonably large revenue base and a reasonably large customer, and then both parties might think about taking it further. Is that the correct way to think about it?
Jason Wang
executiveI wouldn't call it a prerequisite, exactly, though it's certainly one of the key factors to weigh. What matters more, though, is whether the collaboration makes economic sense for both parties. So I think that — once we've matured further and are ready, and we'll definitely keep you updated — but again, where we stand on this is that we're open to exploring it.
Zheng Lu
analystSo when should we expect a meaningful revenue contribution from 12-nanometer?
Jason Wang
executiveSo, I mean, at the moment, the early product tape-out is going to happen in 2027. So we'll probably begin to see some contribution in 2027, but then it ramps after that though.
Operator
operatorSince time is short, we’ll take the final question. That will be Charlie Chan with Morgan Stanley.
Charlie Chan
analystIt really comes down to wafer-on-wafer. So, Jason, could you tell us who the memory partners might be? I mean, it sounds like this needs a lot of what people call customized design interfaces, and so on. So are those partners mostly Taiwanese, or do you have some of the top global memory partners involved in wafer-on-wafer? And second, if you're able to, could you share some of the potential end applications as well as the timing for wafer-on-wafer?
Jason Wang
executiveRegarding wafer-to-wafer stacking capabilities, we're already in mass production for certain extremely small form factor devices within the RFIC space. The reason we bring that up is that, in our view, if you look at where the market is heading, we believe this technology will serve purposes beyond just a small form factor. It offers the option for memory-to-memory, logic-to-logic, and logic-to-memory stacking options. So by giving the customer that option, they tell us they can explore a lot of different product applications. So at this point, advanced packaging technology is evolving into 2 cornerstones. One is the DTC capability. The other is on the wafer-to-wafer stacking capability. And then we — once the technology is ready, we can then explore many different applications.
Charlie Chan
analystRegarding wafer-on-wafer, do you see any kind of advantage or differentiation versus the industry—for example, TSMC, or China's—I'm not sure, maybe XMC, yes—any sort of differentiation you may have?
Jason Wang
executiveI mean, creating differentiated technology is certainly part of our mandate. So we keep pushing on that differentiation. But you also need to ensure you belong in the ecosystem and align with where the market is heading. We look at this from a market perspective. From the angle of technology and product migration, we think these represent 2 really key capabilities and technologies. So we're getting ourselves prepared to have that ready, and after that, we can begin looking into various business opportunities.
Operator
operatorAnd thank you, everyone, for your questions. That brings today's Q&A session to an end. I'll now hand things over to UMC's Head of IR for some closing remarks.
Michael Lin
executiveThanks for joining the conference today. We appreciate your questions. As usual, should you have any further follow-up questions, please don't hesitate to reach out to <<email_hidden>>. Have a good day.
Operator
operatorSo, everyone, that brings the third quarter 2025 call to a close. We appreciate your joining us for UMC's conference. A replay of the webcast will be available in 2 hours. Head to www.umc.com, under the Investors, Events section. You can disconnect at this point. Thanks once more. Goodbye.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete United Microelectronics Corporation transcript — plus 132,000+ transcripts from 7,000+ companies, speaker segments, AI summaries and full-text search — through the EarningsCalls.dev API.
Get the API View API docs →This call discussed
For developers and AI pipelines
Programmatic access to United Microelectronics Corporation earnings transcripts and 132,000+ others is available through the
EarningsCalls.dev REST API. Plans from $39.99/month — full transcripts, speaker segments,
full-text search, and the recently-added /api/v1/transcripts/recent polling endpoint for ETL pipelines.
More tools for stock research
OptionsBell: an unusual options activity scanner that tracks options flow across all US stocks and emails you when large trades appear in United Microelectronics Corporation or any ticker on your watchlist.
StockMarketScan: a stock screener with alerts: 24 pre-built screens refreshed every 5 minutes, watchlists and email notifications. Both offer API and MCP access and fair monthly pricing.